/dts-v1/;
-#include "kirkwood-nsa310-common.dtsi"
+#include "kirkwood-nsa3x0-common.dtsi"
/ {
compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
chosen {
bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
};
mbus {
};
ocp@f1000000 {
- pinctrl: pinctrl@10000 {
+ pinctrl: pin-controller@10000 {
pinctrl-0 = <&pmx_unknown>;
pinctrl-names = "default";
marvell,function = "gpio";
};
- pmx_btn_reset: pmx-btn-reset {
- marvell,pins = "mpp36";
- marvell,function = "gpio";
- };
-
- pmx_btn_copy: pmx-btn-copy {
- marvell,pins = "mpp37";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_green: pmx-led-copy-green {
- marvell,pins = "mpp39";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_red: pmx-led-copy-red {
- marvell,pins = "mpp40";
- marvell,function = "gpio";
- };
-
pmx_led_hdd_green: pmx-led-hdd-green {
marvell,pins = "mpp41";
marvell,function = "gpio";
marvell,function = "gpio";
};
- pmx_btn_power: pmx-btn-power {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
};
i2c@11000 {
};
};
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
- pinctrl-names = "default";
-
- button@1 {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
- };
- button@2 {
- label = "Copy Button";
- linux,code = <KEY_COPY>;
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- button@3 {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
- };
- };
-
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red