select HAVE_KPROBES if (!XIP_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
+ select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
+ select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
select HAVE_GENERIC_DMA_COHERENT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
+ select HAVE_IRQ_WORK
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
select HAVE_REGS_AND_STACK_ACCESS_API
+ select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7))
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
and that the relevant menu configurations are displayed for
it.
+config ARCH_HAS_CPU_IDLE_WAIT
+ def_bool y
+
config GENERIC_HWEIGHT
bool
default y
help
Samsung S3C64XX series based systems
-config ARCH_S5P6440
- bool "Samsung S5P6440"
+config ARCH_S5P64X0
+ bool "Samsung S5P6440 S5P6450"
select CPU_V6
select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_I2C
select HAVE_S3C_RTC
help
- Samsung S5P6440 CPU based systems
+ Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
+ SMDK6450.
config ARCH_S5P6442
bool "Samsung S5P6442"
source "arch/arm/mach-s3c64xx/Kconfig"
endif
-source "arch/arm/mach-s5p6440/Kconfig"
+source "arch/arm/mach-s5p64x0/Kconfig"
source "arch/arm/mach-s5p6442/Kconfig"
config ARM_ERRATA_411920
bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
- depends on CPU_V6 && !SMP
+ depends on CPU_V6
help
Invalidation of the Instruction Cache operation can
fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
invalidated are not, resulting in an incoherency in the system page
tables. The workaround changes the TLB flushing routines to invalidate
entries regardless of the ASID.
+
+config ARM_ERRATA_743622
+ bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 743622 Cortex-A9
+ (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+ optimisation in the Cortex-A9 Store Buffer may lead to data
+ corruption. This workaround sets a specific bit in the diagnostic
+ register of the Cortex-A9 which disables the Store Buffer
+ optimisation, preventing the defect from occurring. This has no
+ visible impact on the overall performance or power consumption of the
+ processor.
+
endmenu
source "arch/arm/common/Kconfig"
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
- depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
- MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
- ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+ depends on EXPERIMENTAL
depends on GENERIC_CLOCKEVENTS
+ depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
+ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
+ ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
select USE_GENERIC_SMP_HELPERS
- select HAVE_ARM_SCU if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 ||\
- ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
+ select HAVE_ARM_SCU
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
If you don't know what to do here, say N.
+config SMP_ON_UP
+ bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on SMP && !XIP && !THUMB2_KERNEL
+ default y
+ help
+ SMP kernels contain instructions which fail on non-SMP processors.
+ Enabling this option allows the kernel to modify itself to make
+ these instructions safe. Disabling it allows about 1K of space
+ savings.
+
+ If you don't know what to do here, say Y.
+
config HAVE_ARM_SCU
bool
depends on SMP
config LOCAL_TIMERS
bool "Use local timer interrupts"
- depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
- REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
- ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
+ depends on SMP
default y
- select HAVE_ARM_TWD if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 || \
- ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS
+ select HAVE_ARM_TWD
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
config HZ
int
- default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \
+ default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91