1. Copyright
============
-Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>
+Copyright (C) 2006-2007 by Luca Risolia <luca.risolia@studio.unibo.it>
2. Disclaimer
6. Module loading
=================
To use the driver, it is necessary to load the "zc0301" module into memory
-after every other module required: "videodev", "usbcore" and, depending on
-the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd".
+after every other module required: "videodev", "v4l2_common", "compat_ioctl32",
+"usbcore" and, depending on the USB host controller you have, "ehci-hcd",
+"uhci-hcd" or "ohci-hcd".
Loading can be done as shown below:
Description: Debugging information level, from 0 to 3:
0 = none (use carefully)
1 = critical errors
- 2 = significant informations
+ 2 = significant information
3 = more verbose messages
Level 3 is useful for testing only, when only one device
- is used at the same time. It also shows some more informations
+ is used at the same time. It also shows some information
about the hardware being detected. This module parameter can be
changed at runtime thanks to the /sys filesystem interface.
Default: 2
0x041e 0x4036
0x041e 0x403a
0x0458 0x7007
-0x0458 0x700C
+0x0458 0x700c
0x0458 0x700f
0x046d 0x08ae
0x055f 0xd003
0x055f 0xd004
-0x046d 0x08ae
0x0ac8 0x0301
0x0ac8 0x301b
0x0ac8 0x303b
11. Credits
===========
-- Informations about the chip internals needed to enable the I2C protocol have
+- Information about the chip internals needed to enable the I2C protocol have
been taken from the documentation of the ZC030x Video4Linux1 driver written
by Andrew Birkett <andy@nobugs.org>;
- The initialization values of the ZC0301 controller connected to the PAS202BCB