** for linux standard list
** enable usage of pci message signal interrupt
** follow Randy.Danlup kindness suggestion cleanup this code
-**************************************************************************
\ No newline at end of file
+** 1.20.00.14 05/02/2007 Erich Chen & Nick Cheng
+** 1.implement PCI-Express error recovery function and AER capability
+** 2.implement the selection of ARCMSR_MAX_XFER_SECTORS_B=4096
+** if firmware version is newer than 1.42
+** 3.modify arcmsr_iop_reset to improve the ability
+** 4.modify the ISR, arcmsr_interrupt routine,to prevent the
+** inconsistency with sg_mod driver if application directly calls
+** the arcmsr driver w/o passing through scsi mid layer
+** specially thanks to Yanmin Zhang's openhanded help about AER
+** 1.20.00.15 08/30/2007 Erich Chen & Nick Cheng
+** 1. support ARC1200/1201/1202 SATA RAID adapter, which is named
+** ACB_ADAPTER_TYPE_B
+** 2. modify the arcmsr_pci_slot_reset function
+** 3. modify the arcmsr_pci_ers_disconnect_forepart function
+** 4. modify the arcmsr_pci_ers_need_reset_forepart function
+** 1.20.00.15 09/27/2007 Erich Chen & Nick Cheng
+** 1. add arcmsr_enable_eoi_mode() on adapter Type B
+** 2. add readl(reg->iop2drv_doorbell_reg) in arcmsr_handle_hbb_isr()
+** in case of the doorbell interrupt clearance is cached
+** 1.20.00.15 10/01/2007 Erich Chen & Nick Cheng
+** 1. modify acb->devstate[i][j]
+** as ARECA_RAID_GOOD instead of
+** ARECA_RAID_GONE in arcmsr_alloc_ccb_pool
+** 1.20.00.15 11/06/2007 Erich Chen & Nick Cheng
+** 1. add conditional declaration for
+** arcmsr_pci_error_detected() and
+** arcmsr_pci_slot_reset
+** 1.20.00.15 11/23/2007 Erich Chen & Nick Cheng
+** 1.check if the sg list member number
+** exceeds arcmsr default limit in arcmsr_build_ccb()
+** 2.change the returned value type of arcmsr_build_ccb()
+** from "void" to "int"
+** 3.add the conditional check if arcmsr_build_ccb()
+** returns FAILED
+** 1.20.00.15 12/04/2007 Erich Chen & Nick Cheng
+** 1. modify arcmsr_drain_donequeue() to ignore unknown
+** command and let kernel process command timeout.
+** This could handle IO request violating max. segments
+** while Linux XFS over DM-CRYPT.
+** Thanks to Milan Broz's comments <mbroz@redhat.com>
+** 1.20.00.15 12/24/2007 Erich Chen & Nick Cheng
+** 1.fix the portability problems
+** 2.fix type B where we should _not_ iounmap() acb->pmu;
+** it's not ioremapped.
+** 3.add return -ENOMEM if ioremap() fails
+** 4.transfer IS_SG64_ADDR w/ cpu_to_le32()
+** in arcmsr_build_ccb
+** 5. modify acb->devstate[i][j] as ARECA_RAID_GONE instead of
+** ARECA_RAID_GOOD in arcmsr_alloc_ccb_pool()
+** 6.fix arcmsr_cdb->Context as (unsigned long)arcmsr_cdb
+** 7.add the checking state of
+** (outbound_intstatus & ARCMSR_MU_OUTBOUND_HANDLE_INT) == 0
+** in arcmsr_handle_hba_isr
+** 8.replace pci_alloc_consistent()/pci_free_consistent() with kmalloc()/kfree() in arcmsr_iop_message_xfer()
+** 9. fix the release of dma memory for type B in arcmsr_free_ccb_pool()
+** 10.fix the arcmsr_polling_hbb_ccbdone()
+** 1.20.00.15 02/27/2008 Erich Chen & Nick Cheng
+** 1.arcmsr_iop_message_xfer() is called from atomic context under the
+** queuecommand scsi_host_template handler. James Bottomley pointed out
+** that the current GFP_KERNEL|GFP_DMA flags are wrong: firstly we are in
+** atomic context, secondly this memory is not used for DMA.
+** Also removed some unneeded casts. Thanks to Daniel Drake <dsd@gentoo.org>
+**************************************************************************
git.openpandora.org / pandora-kernel.git / blobdiff