ath9k_hw: remove AR9485 1.0 support

[pandora-kernel.git] / Documentation / kernel-parameters.txt

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 89835a4..c357a31 100644 (file)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -144,6 +144,11 @@ a fixed number of characters. This limit depends on the architecture
 and is between 256 and 4096 characters. It is defined in the file
 ./include/asm/setup.h as COMMAND_LINE_SIZE.
 
+Finally, the [KMG] suffix is commonly described after a number of kernel
+parameter values. These 'K', 'M', and 'G' letters represent the _binary_
+multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
+bytes respectively. Such letter suffixes can also be entirely omitted.
+
 
        acpi=           [HW,ACPI,X86]
                        Advanced Configuration and Power Interface
@@ -545,16 +550,20 @@ and is between 256 and 4096 characters. It is defined in the file
                        Format:
                        <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
 
-       crashkernel=nn[KMG]@ss[KMG]
-                       [KNL] Reserve a chunk of physical memory to
-                       hold a kernel to switch to with kexec on panic.
+       crashkernel=size[KMG][@offset[KMG]]
+                       [KNL] Using kexec, Linux can switch to a 'crash kernel'
+                       upon panic. This parameter reserves the physical
+                       memory region [offset, offset + size] for that kernel
+                       image. If '@offset' is omitted, then a suitable offset
+                       is selected automatically. Check
+                       Documentation/kdump/kdump.txt for further details.
 
        crashkernel=range1:size1[,range2:size2,...][@offset]
                        [KNL] Same as above, but depends on the memory
                        in the running system. The syntax of range is
                        start-[end] where start and end are both
                        a memory unit (amount[KMG]). See also
-                       Documentation/kdump/kdump.txt for a example.
+                       Documentation/kdump/kdump.txt for an example.
 
        cs89x0_dma=     [HW,NET]
                        Format: <dma>
@@ -617,6 +626,10 @@ and is between 256 and 4096 characters. It is defined in the file
        disable=        [IPV6]
                        See Documentation/networking/ipv6.txt.
 
+       disable_ddw     [PPC/PSERIES]
+                       Disable Dynamic DMA Window support. Use this if
+                       to workaround buggy firmware.
+
        disable_ipv6=   [IPV6]
                        See Documentation/networking/ipv6.txt.
 
@@ -859,6 +872,12 @@ and is between 256 and 4096 characters. It is defined in the file
                               If specified, z/VM IUCV HVC accepts connections
                               from listed z/VM user IDs only.
 
+       keep_bootcon    [KNL]
+                       Do not unregister boot console at start. This is only
+                       useful for debugging when something happens in the window
+                       between unregistering the boot console and initializing
+                       the real console.
+
        i2c_bus=        [HW] Override the default board specific I2C bus speed
                             or register an additional I2C bus that is not
                             registered from board initialization code.
@@ -1262,10 +1281,9 @@ and is between 256 and 4096 characters. It is defined in the file
                        6 (KERN_INFO)           informational
                        7 (KERN_DEBUG)          debug-level messages
 
-       log_buf_len=n   Sets the size of the printk ring buffer, in bytes.
-                       Format: { n | nk | nM }
-                       n must be a power of two.  The default size
-                       is set in the kernel config file.
+       log_buf_len=n[KMG]      Sets the size of the printk ring buffer,
+                       in bytes.  n must be a power of two.  The default
+                       size is set in the kernel config file.
 
        logo.nologo     [FB] Disables display of the built-in Linux logo.
                        This may be used to provide more screen space for
@@ -1572,16 +1590,25 @@ and is between 256 and 4096 characters. It is defined in the file
                        of returning the full 64-bit number.
                        The default is to return 64-bit inode numbers.
 
+       nfs.nfs4_disable_idmapping=
+                       [NFSv4] When set, this option disables the NFSv4
+                       idmapper on the client, but only if the mount
+                       is using the 'sec=sys' security flavour. This may
+                       make migration from legacy NFSv2/v3 systems easier
+                       provided that the server has the appropriate support.
+                       The default is to always enable NFSv4 idmapping.
+
        nmi_debug=      [KNL,AVR32,SH] Specify one or more actions to take
                        when a NMI is triggered.
                        Format: [state][,regs][,debounce][,die]
 
        nmi_watchdog=   [KNL,BUGS=X86] Debugging features for SMP kernels
-                       Format: [panic,][num]
+                       Format: [panic,][nopanic,][num]
                        Valid num: 0
                        0 - turn nmi_watchdog off
                        When panic is specified, panic when an NMI watchdog
-                       timeout occurs.
+                       timeout occurs (or 'nopanic' to override the opposite
+                       default).
                        This is useful when you use a panic=... timeout and
                        need the box quickly up again.
 
@@ -1805,6 +1832,11 @@ and is between 256 and 4096 characters. It is defined in the file
                                perfmon on Intel CPUs instead of the
                                CPU specific event set.
 
+       oops=panic      Always panic on oopses. Default is to just kill the process,
+                       but there is a small probability of deadlocking the machine.
+                       This will also cause panics on machine check exceptions.
+                       Useful together with panic=30 to trigger a reboot.
+
        OSS             [HW,OSS]
                        See Documentation/sound/oss/oss-parameters.txt
 
@@ -2436,6 +2468,10 @@ and is between 256 and 4096 characters. It is defined in the file
                        <deci-seconds>: poll all this frequency
                        0: no polling (default)
 
+       threadirqs      [KNL]
+                       Force threading of all interrupt handlers except those
+                       marked explicitely IRQF_NO_THREAD.
+
        topology=       [S390]
                        Format: {off | on}
                        Specify if the kernel should make use of the cpu