Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
* Maxim MAX6659
- Prefix: 'max6657'
- Addresses scanned: I2C 0x4c, 0x4d (unsupported 0x4e)
+ Prefix: 'max6659'
+ Addresses scanned: I2C 0x4c, 0x4d, 0x4e
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
* Maxim MAX6680
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
+ * Maxim MAX6695
+ Prefix: 'max6695'
+ Addresses scanned: I2C 0x18
+ Datasheet: Publicly available at the Maxim website
+ http://www.maxim-ic.com/datasheet/index.mvp/id/4199
+ * Maxim MAX6696
+ Prefix: 'max6695'
+ Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
+ 0x4c, 0x4d and 0x4e
+ Datasheet: Publicly available at the Maxim website
+ http://www.maxim-ic.com/datasheet/index.mvp/id/4199
+ * Winbond/Nuvoton W83L771W/G
+ Prefix: 'w83l771'
+ Addresses scanned: I2C 0x4c
+ Datasheet: No longer available
* Winbond/Nuvoton W83L771AWG/ASG
Prefix: 'w83l771'
Addresses scanned: I2C 0x4c
with many other devices, many of which are supported by this driver.
Note that there is no easy way to differentiate between the MAX6657,
-MAX6658 and MAX6659 variants. The extra address and features of the
-MAX6659 are not supported by this driver. The MAX6680 and MAX6681 only
-differ in their pinout, therefore they obviously can't (and don't need to)
-be distinguished.
+MAX6658 and MAX6659 variants. The extra features of the MAX6659 are only
+supported by this driver if the chip is located at address 0x4d or 0x4e,
+or if the chip type is explicitly selected as max6659.
+The MAX6680 and MAX6681 only differ in their pinout, therefore they obviously
+can't (and don't need to) be distinguished.
The specificity of this family of chipsets over the ADM1021/LM84
family is that it features critical limits with hysteresis, and an
* Selectable address
* Remote sensor type selection
+MAX6695 and MAX6696:
+ * Better local resolution
+ * Selectable address (max6696)
+ * Second critical temperature limit
+ * Two remote sensors
+
+W83L771W/G
+ * The G variant is lead-free, otherwise similar to the W.
+ * Filter and alert configuration register at 0xBF
+ * Moving average (depending on conversion rate)
+
W83L771AWG/ASG
+ * Successor of the W83L771W/G, same features.
* The AWG and ASG variants only differ in package format.
- * Filter and alert configuration register at 0xBF
* Diode ideality factor configuration (remote sensor) at 0xE3
- * Moving average (depending on conversion rate)
All temperature values are given in degrees Celsius. Resolution
is 1.0 degree for the local temperature, 0.125 degree for the remote