Remove long-unmaintained ftape driver subsystem.
[pandora-kernel.git] / Documentation / feature-removal-schedule.txt
index 552507f..226ecf2 100644 (file)
@@ -6,6 +6,21 @@ be removed from this file.
 
 ---------------------------
 
+What:  /sys/devices/.../power/state
+       dev->power.power_state
+       dpm_runtime_{suspend,resume)()
+When:  July 2007
+Why:   Broken design for runtime control over driver power states, confusing
+       driver-internal runtime power management with:  mechanisms to support
+       system-wide sleep state transitions; event codes that distinguish
+       different phases of swsusp "sleep" transitions; and userspace policy
+       inputs.  This framework was never widely used, and most attempts to
+       use it were broken.  Drivers should instead be exposing domain-specific
+       interfaces either to kernel or to userspace.
+Who:   Pavel Machek <pavel@suse.cz>
+
+---------------------------
+
 What:  RAW driver (CONFIG_RAW_DRIVER)
 When:  December 2005
 Why:   declared obsolete since kernel 2.6.3
@@ -14,14 +29,6 @@ Who: Adrian Bunk <bunk@stusta.de>
 
 ---------------------------
 
-What:  drivers that were depending on OBSOLETE_OSS_DRIVER
-        (config options already removed)
-When:  before 2.6.19
-Why:   OSS drivers with ALSA replacements
-Who:   Adrian Bunk <bunk@stusta.de>
-
----------------------------
-
 What:  raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
 When:  November 2006
 Why:   Deprecated in favour of the new ioctl-based rawiso interface, which is
@@ -31,17 +38,8 @@ Who: Jody McIntyre <scjody@modernduck.com>
 
 ---------------------------
 
-What:  sbp2: module parameter "force_inquiry_hack"
-When:  July 2006
-Why:   Superceded by parameter "workarounds". Both parameters are meant to be
-       used ad-hoc and for single devices only, i.e. not in modprobe.conf,
-       therefore the impact of this feature replacement should be low.
-Who:   Stefan Richter <stefanr@s5r6.in-berlin.de>
-
----------------------------
-
 What:  Video4Linux API 1 ioctls and video_decoder.h from Video devices.
-When:  July 2006
+When:  December 2006
 Why:   V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
        series. The old API have lots of drawbacks and don't provide enough
        means to work with all video and audio standards. The newer API is
@@ -72,18 +70,6 @@ Who: Dominik Brodowski <linux@brodo.de>
 
 ---------------------------
 
-What:  ip_queue and ip6_queue (old ipv4-only and ipv6-only netfilter queue)
-When:  December 2005
-Why:   This interface has been obsoleted by the new layer3-independent
-       "nfnetlink_queue".  The Kernel interface is compatible, so the old
-       ip[6]tables "QUEUE" targets still work and will transparently handle
-       all packets into nfnetlink queue number 0.  Userspace users will have
-       to link against API-compatible library on top of libnfnetlink_queue 
-       instead of the current 'libipq'.
-Who:   Harald Welte <laforge@netfilter.org>
-
----------------------------
-
 What:  remove EXPORT_SYMBOL(kernel_thread)
 When:  August 2006
 Files: arch/*/kernel/*_ksyms.c
@@ -104,15 +90,6 @@ Who:    Arjan van de Ven
 
 ---------------------------
 
-What:  START_ARRAY ioctl for md
-When:  July 2006
-Files: drivers/md/md.c
-Why:   Not reliable by design - can fail when most needed.
-       Alternatives exist
-Who:   NeilBrown <neilb@suse.de>
-
----------------------------
-
 What:   eepro100 network driver
 When:   January 2007
 Why:    replaced by the e100 driver
@@ -175,7 +152,7 @@ Who:        Greg Kroah-Hartman <gregkh@suse.de>
 ---------------------------
 
 What:  USB driver API moves to EXPORT_SYMBOL_GPL
-When:  Febuary 2008
+When:  February 2008
 Files: include/linux/usb.h, drivers/usb/core/driver.c
 Why:   The USB subsystem has changed a lot over time, and it has been
        possible to create userspace USB drivers using usbfs/libusb/gadgetfs
@@ -202,50 +179,6 @@ Who:       Nick Piggin <npiggin@suse.de>
 
 ---------------------------
 
-What:  Support for the MIPS EV96100 evaluation board
-When:  September 2006
-Why:   Does no longer build since at least November 15, 2003, apparently
-       no userbase left.
-Who:   Ralf Baechle <ralf@linux-mips.org>
-
----------------------------
-
-What:  Support for the Momentum / PMC-Sierra Jaguar ATX evaluation board
-When:  September 2006
-Why:   Does no longer build since quite some time, and was never popular,
-       due to the platform being replaced by successor models.  Apparently
-       no user base left.  It also is one of the last users of
-       WANT_PAGE_VIRTUAL.
-Who:   Ralf Baechle <ralf@linux-mips.org>
-
----------------------------
-
-What:  Support for the Momentum Ocelot, Ocelot 3, Ocelot C and Ocelot G
-When:  September 2006
-Why:   Some do no longer build and apparently there is no user base left
-       for these platforms.
-Who:   Ralf Baechle <ralf@linux-mips.org>
-
----------------------------
-
-What:  Support for MIPS Technologies' Altas and SEAD evaluation board
-When:  September 2006
-Why:   Some do no longer build and apparently there is no user base left
-       for these platforms.  Hardware out of production since several years.
-Who:   Ralf Baechle <ralf@linux-mips.org>
-
----------------------------
-
-What:  Support for the IT8172-based platforms, ITE 8172G and Globespan IVR
-When:  September 2006
-Why:   Code does no longer build since at least 2.6.0,  apparently there is
-       no user base left for these platforms.  Hardware out of production
-       since several years and hardly a trace of the manufacturer left on
-       the net.
-Who:   Ralf Baechle <ralf@linux-mips.org>
-
----------------------------
-
 What:  Interrupt only SA_* flags
 When:  Januar 2007
 Why:   The interrupt related SA_* flags are replaced by IRQF_* to move them
@@ -282,15 +215,30 @@ Who:      Patrick McHardy <kaber@trash.net>
 
 ---------------------------
 
-What:  frame diverter
-When:  November 2006
-Why:   The frame diverter is included in most distribution kernels, but is
-       broken. It does not correctly handle many things:
-       - IPV6
-       - non-linear skb's
-       - network device RCU on removal
-       - input frames not correctly checked for protocol errors
-       It also adds allocation overhead even if not enabled.
-       It is not clear if anyone is still using it.
-Who:   Stephen Hemminger <shemminger@osdl.org>
+What:  PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
+When:  October 2008
+Why:   The stacking of class devices makes these values misleading and
+       inconsistent.
+       Class devices should not carry any of these properties, and bus
+       devices have SUBSYTEM and DRIVER as a replacement.
+Who:   Kay Sievers <kay.sievers@suse.de>
+
+---------------------------
+
+What:  i2c-isa
+When:  December 2006
+Why:   i2c-isa is a non-sense and doesn't fit in the device driver
+       model. Drivers relying on it are better implemented as platform
+       drivers.
+Who:   Jean Delvare <khali@linux-fr.org>
+
+---------------------------
 
+What:  IPv4 only connection tracking/NAT/helpers
+When:  2.6.22
+Why:   The new layer 3 independant connection tracking replaces the old
+       IPv4 only version. After some stabilization of the new code the
+       old one will be removed.
+Who:   Patrick McHardy <kaber@trash.net>
+
+---------------------------