+======================================================================
+Changes for U-Boot 1.0.0:
+======================================================================
+
+* Patch by Rune Torgersen, 11 Sep 2003:
+ Changed default memory option on MPC8266ADS to NOT be Page Based
+ Interleave, since this doesn't work very well with the standard
+ 16MB DIMM
+
+* Patch by George G. Davis, 12 Sep 2003:
+ fix Makefile settings for sk98 driver
+
+* Patch by Stefan Roese, 12 Sep 2003:
+ - new boards added: DP405, HUB405, PLU405, VOH405
+ - some esd boards updated
+ - cpu/ppc4xx/sdram.c: disable memory controller before setting
+ first values
+ - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
+
+* Patch by Martin Krause, 11 Sep 2003:
+ add burn-in tests for TRAB board
+
+* Enable instruction cache on MPC5200 board
+
+* Patch by Denis Peter, 11 Sep 2003:
+ - fix USB data pointer assignment for bulk only transfer.
+ - prevent to display erased directories in FAT filesystem.
+
+* Change output format for NAND flash - make it look like for other
+ memory, too
+
+======================================================================
+Changes for U-Boot 0.4.8:
+======================================================================
+
+* Patches by Denis Peter, 9 Sep 2003:
+ add FAT support for IDE, SCSI and USB
+
+* Patches by Gleb Natapov, 2 Sep 2003:
+ - cleanup of POST code for unsupported architectures
+ - MPC824x locks way0 of data cache for use as initial RAM;
+ this patch unlocks it after relocation to RAM and invalidates
+ the locked entries.
+
+* Patch by Gleb Natapov, 30 Aug 2003:
+ new I2C driver for mpc107 bridge. Now works from flash.
+
+* Patch by Dave Ellis, 11 Aug 2003:
+ - JFFS2: fix typo in common/cmd_jffs2.c
+ - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
+ - JFFS2: remove node version 0 warning
+ - JFFS2: accept JFFS2 PADDING nodes
+ - SXNI855T: add AM29LV800 support
+ - SXNI855T: move environment from EEPROM to flash
+ - SXNI855T: boot from JFFS2 in NOR or NAND flash
+
+* Patch by Bill Hargen, 11 Aug 2003:
+ fixes for I2C on MPC8240
+ - fix i2c_write routine
+ - fix iprobe command
+ - eliminates use of global variables, plus dead code, cleanup.
+
+* Add support for USB Mass Storage Devices (BBB)
+ (tested with USB memory sticks only)
+
+* Avoid flicker on TRAB's VFD
+
+* Add support for SK98xx driver
+
+* Add PCI support for SL8245 board
+
+* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
+ or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
+ Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
+
+* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
+ to allow for more accurate baudrate settings
+ (error now 0.7% at 115 kbps, instead of 3.5% before)
+
+* Patch by Andreas Mohr, 4 Sep 2003:
+ Fix a lot of spelling errors
+
+* Add support for PPChameleon Eval Board
+
+* Add support for P3G4 board
+
+* Fix problem with MGT5100 FEC driver: add "early" MAC address
+ initialization
+
+* Patch by Yuli Barcohen, 7 Aug 2003:
+ check BCSR to detect if the board is configured in PCI mode
+
+======================================================================
+Changes for U-Boot 0.4.7:
+======================================================================
+
+* Patch by Raghu Krishnaprasad, 7 Aug 2003:
+ add support for Adder II MPC852T module
+
+* Patch by George G. Davis, 19 Aug 2003:
+ fix TI Innovator/OMAP1510 pin configs
+
+* Patches by Kshitij, 18 Aug 2003
+ - add support for arm926ejs cpu core
+ - add support for TI OMAP 1610 Innovator Board
+
+* Patch by Yuli Barcohen, 14 Aug 2003:
+ add support for bzip2 uncompression
+
+* Add GCC library to examples/Makefile so GCC utility functions will
+ be resolved, too
+
+* Add I2C and RTC support for RMU board using software I2C driver
+ (because of better response to iprobe command); fix problem with
+ "reset" command
+
+* Patch by Matthias Fuchs, 28 Aug 2003:
+ Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
+ CONFIG_BOOTP_MAKS (see README).
+
+* Fix ICU862 environment problem
+
+* Fix RAM size detection for RMU board
+
+* Implement "reset" for MGT5100/MPC5200 systems
+
+======================================================================
+Changes for U-Boot 0.4.6:
+======================================================================
+
+* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
+ allow selection of clock frequency as "make" target
+
+* Implement memory autosizing code for IceCube boards
+
+* Configure network port on INCA-IP for autonegotiation
+
+* Fix overflow problem in network timeout code
+
+* Patch by Richard Woodruff, 8 Aug 2003:
+ Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
+
======================================================================
Changes for U-Boot 0.4.5:
======================================================================
+* Update for TQM board defaults:
+ disable clocks_in_mhz, enable boot count limit
+
+* Removed tools/gdb from "make all" target. Added make target "gdbtools"
+ in toplevel directory instead. Removed astest.c from tools/gdb because
+ it is no longer relevant.
+
+* Fix PCI support for MPC5200 / IceCube Board
+
+* Map ISP1362 USB OTG controller for NSCU board
+
+* Patch by Brad Parker, 02 Aug 2003:
+ fix sc520_cdp problems
+
+* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
+
+* Allow erase command to cross flash bank boundaries
+
+* Patch by Scott McNutt, 21 Jul 2003:
+ Add support for LynuxWorks Kernel Downloadable Images (KDIs).
+ Both LynxOS and BlueCat linux KDIs are supported.
+
+* Patch by Richard Woodruff, 25 Jul 2003:
+ use more reliable reset for OMAP/925T
+
+* Patch by Nye Liu, 25 Jul 2003:
+ fix typo in mpc8xx.h
+
+* Patch by Richard Woodruff, 24 Jul 2003:
+ Fixes for cmd_nand.c:
+ - Fixed null dereferece which could result in incorrect ECC values.
+ - Added support for devices with no Ready/Busy signal hooked up.
+ - Added OMAP1510 read/write protect handling.
+ - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
+ for non-JFFS2.
+ - Switched default ECC to be JFFS2.
+
+* Allow crc32 to be used at address 0x000
+
+* Provide consistent interface to standalone applications to access
+ the 'global_data' structure
+ Provide a doc/README.standalone more useful to users/developers.
+
+* Make IceCube MGT5100 FEC driver work
+
+* Implement new mechanism to export U-Boot's functions to standalone
+ applications: instead of using (PPC-specific) system calls we now
+ use a jump table; please see doc/README.standalone for details
+
+* Patch by Dave Westwood, 24 Jul 2003:
+ added support for Unity OS (a proprietary OS)
+
+* Patch by Detlev Zundel, 23 Jul 2003:
+ add "imls" command to print flash table of contents
+
+* Fix cold boot detection for log buffer reset
+
+* Return error for invalid length specifiers with "cp.X" etc.
+
+* Fix startup problem on MIPS
+
+* Allow for CONFIG_SPLASH_SCREEN even when no explicit
+ bitmap support is configured
+
+* Patch by Bill Hargen, 18 Jul 2003:
+ - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
+
+* Patch by Denis Peter, 18 Jul 2003:
+ - fix memory configuration for MIP405T
+ - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
+
+* Cleanup of TQM82xx configurations; use "official" board types
+ to make selection easier.
+
* Patch by Martin Krause, 17 Jul 2003:
add delay to get I2C working with "imm" command and s3c24x0_i2c.c
* Patch by Richard Woodruff, 17 July 03:
- - Fixed bug in OMAP1510 baud rate divisor settings.
+ - Fixed bug in OMAP1510 baud rate divisor settings.
* Patch by Nye Liu, 16 July 2003:
MPC860FADS fixes:
- PIC on LWMON board needs delay after power-on
- Add missing RSR definitions for MPC8xx
- Improve log buffer handling: guarantee clean reset after power-on
- - Add support for EXBITGEN board
+ - Add support for EXBITGEN board (aka "genie")
- Add support for SL8245 board
* Code cleanup:
git.openpandora.org / pandora-u-boot.git / blobdiff