-#ifdef QOS_DLS_SUPPORT
-/*
- ==========================================================================
- Description:
-
- IRQL = DISPATCH_LEVEL
-
- ==========================================================================
-*/
-VOID CntlOidDLSSetupProc(
- IN PRTMP_ADAPTER pAd,
- IN MLME_QUEUE_ELEM *Elem)
-{
- PRT_802_11_DLS pDLS = (PRT_802_11_DLS)Elem->Msg;
- MLME_DLS_REQ_STRUCT MlmeDlsReq;
- INT i;
- USHORT reason = REASON_UNSPECIFY;
-
- DBGPRINT(RT_DEBUG_TRACE,("CNTL - (OID set %02x:%02x:%02x:%02x:%02x:%02x with Valid=%d, Status=%d, TimeOut=%d, CountDownTimer=%d)\n",
- pDLS->MacAddr[0], pDLS->MacAddr[1], pDLS->MacAddr[2], pDLS->MacAddr[3], pDLS->MacAddr[4], pDLS->MacAddr[5],
- pDLS->Valid, pDLS->Status, pDLS->TimeOut, pDLS->CountDownTimer));
-
- if (!pAd->CommonCfg.bDLSCapable)
- return;
-
- // DLS will not be supported when Adhoc mode
- if (INFRA_ON(pAd))
- {
- for (i = 0; i < MAX_NUM_OF_DLS_ENTRY; i++)
- {
- if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) &&
- (pDLS->TimeOut == pAd->StaCfg.DLSEntry[i].TimeOut) && MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
- {
- // 1. Same setting, just drop it
- DBGPRINT(RT_DEBUG_TRACE,("CNTL - setting unchanged\n"));
- break;
- }
- else if (!pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) &&
- MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
- {
- // 2. Disable DLS link case, just tear down DLS link
- reason = REASON_QOS_UNWANTED_MECHANISM;
- pAd->StaCfg.DLSEntry[i].Valid = FALSE;
- pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
- DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
- MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
- DBGPRINT(RT_DEBUG_TRACE,("CNTL - start tear down procedure\n"));
- break;
- }
- else if ((i < MAX_NUM_OF_DLS_ENTRY) && pDLS->Valid && !pAd->StaCfg.DLSEntry[i].Valid)
- {
- // 3. Enable case, start DLS setup procedure
- NdisMoveMemory(&pAd->StaCfg.DLSEntry[i], pDLS, sizeof(RT_802_11_DLS_UI));
-
- //Update countdown timer
- pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut;
- DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
- MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
- DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS setup case\n"));
- break;
- }
- else if ((i < MAX_NUM_OF_DLS_ENTRY) && pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid &&
- (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH) && !MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
- {
- // 4. update mac case, tear down old DLS and setup new DLS
- reason = REASON_QOS_UNWANTED_MECHANISM;
- pAd->StaCfg.DLSEntry[i].Valid = FALSE;
- pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
- DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
- MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_TEAR_DOWN, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
- NdisMoveMemory(&pAd->StaCfg.DLSEntry[i], pDLS, sizeof(RT_802_11_DLS_UI));
- DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
- MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
- DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS tear down and restart case\n"));
- break;
- }
- else if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid &&
- MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr) && (pAd->StaCfg.DLSEntry[i].TimeOut != pDLS->TimeOut))
- {
- // 5. update timeout case, start DLS setup procedure (no tear down)
- pAd->StaCfg.DLSEntry[i].TimeOut = pDLS->TimeOut;
- //Update countdown timer
- pAd->StaCfg.DLSEntry[i].CountDownTimer = pAd->StaCfg.DLSEntry[i].TimeOut;
- DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
- MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
- DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS update timeout case\n"));
- break;
- }
- else if (pDLS->Valid && pAd->StaCfg.DLSEntry[i].Valid &&
- (pAd->StaCfg.DLSEntry[i].Status != DLS_FINISH) && MAC_ADDR_EQUAL(pDLS->MacAddr, pAd->StaCfg.DLSEntry[i].MacAddr))
- {
- // 6. re-setup case, start DLS setup procedure (no tear down)
- DlsParmFill(pAd, &MlmeDlsReq, &pAd->StaCfg.DLSEntry[i], reason);
- MlmeEnqueue(pAd, DLS_STATE_MACHINE, MT2_MLME_DLS_REQ, sizeof(MLME_DLS_REQ_STRUCT), &MlmeDlsReq);
- DBGPRINT(RT_DEBUG_TRACE,("CNTL - DLS retry setup procedure\n"));
- break;
- }
- else
- {
- DBGPRINT(RT_DEBUG_WARN,("CNTL - DLS not changed in entry - %d - Valid=%d, Status=%d, TimeOut=%d\n",
- i, pAd->StaCfg.DLSEntry[i].Valid, pAd->StaCfg.DLSEntry[i].Status, pAd->StaCfg.DLSEntry[i].TimeOut));
- }
- }
- }
-}
-#endif // QOS_DLS_SUPPORT //
-