+config ADM8211
+ tristate "ADMtek ADM8211 support"
+ depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+ select CRC32
+ select EEPROM_93CX6
+ ---help---
+ This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
+ These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
+
+ Xterasys Cardbus XN-2411b
+ Blitz NetWave Point PC
+ TrendNet 221pc
+ Belkin F5D6001
+ SMC 2635W
+ Linksys WPC11 v1
+ Fiberline FL-WL-200X
+ 3com Office Connect (3CRSHPW796)
+ Corega WLPCIB-11
+ SMC 2602W V2 EU
+ D-Link DWL-520 Revision C
+
+ However, some of these cards have been replaced with other chips
+ like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
+ the Ralink RT2400 (SMC2635W) without a model number change.
+
+ Thanks to Infineon-ADMtek for their support of this driver.
+
+config P54_COMMON
+ tristate "Softmac Prism54 support"
+ depends on MAC80211 && WLAN_80211 && FW_LOADER && EXPERIMENTAL
+ ---help---
+ This is common code for isl38xx based cards.
+ This module does nothing by itself - the USB/PCI frontends
+ also need to be enabled in order to support any devices.
+
+ These devices require softmac firmware which can be found at
+ http://prism54.org/
+
+ If you choose to build a module, it'll be called p54common.
+
+config P54_USB
+ tristate "Prism54 USB support"
+ depends on P54_COMMON && USB
+ select CRC32
+ ---help---
+ This driver is for USB isl38xx based wireless cards.
+ These are USB based adapters found in devices such as:
+
+ 3COM 3CRWE254G72
+ SMC 2862W-G
+ Accton 802.11g WN4501 USB
+ Siemens Gigaset USB
+ Netgear WG121
+ Netgear WG111
+ Medion 40900, Roper Europe
+ Shuttle PN15, Airvast WM168g, IOGear GWU513
+ Linksys WUSB54G
+ Linksys WUSB54G Portable
+ DLink DWL-G120 Spinnaker
+ DLink DWL-G122
+ Belkin F5D7050 ver 1000
+ Cohiba Proto board
+ SMC 2862W-G version 2
+ U.S. Robotics U5 802.11g Adapter
+ FUJITSU E-5400 USB D1700
+ Sagem XG703A
+ DLink DWL-G120 Cohiba
+ Spinnaker Proto board
+ Linksys WUSB54AG
+ Inventel UR054G
+ Spinnaker DUT
+
+ These devices require softmac firmware which can be found at
+ http://prism54.org/
+
+ If you choose to build a module, it'll be called p54usb.
+
+config P54_PCI
+ tristate "Prism54 PCI support"
+ depends on P54_COMMON && PCI
+ ---help---
+ This driver is for PCI isl38xx based wireless cards.
+ This driver supports most devices that are supported by the
+ fullmac prism54 driver plus many devices which are not
+ supported by the fullmac driver/firmware.
+
+ This driver requires softmac firmware which can be found at
+ http://prism54.org/
+
+ If you choose to build a module, it'll be called p54pci.
+
+config ATH5K
+ tristate "Atheros 5xxx wireless cards support"
+ depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
+ ---help---
+ This module adds support for wireless adapters based on
+ Atheros 5xxx chipset.
+
+ Currently the following chip versions are supported:
+
+ MAC: AR5211 AR5212
+ PHY: RF5111/2111 RF5112/2112 RF5413/2413
+
+ This driver uses the kernel's mac80211 subsystem.
+
+ If you choose to build a module, it'll be called ath5k. Say M if
+ unsure.
+
+source "drivers/net/wireless/iwlwifi/Kconfig"