2 * BSS client mode implementation
3 * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
4 * Copyright 2004, Instant802 Networks, Inc.
5 * Copyright 2005, Devicescape Software, Inc.
6 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
7 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 #include <linux/delay.h>
15 #include <linux/if_ether.h>
16 #include <linux/skbuff.h>
17 #include <linux/if_arp.h>
18 #include <linux/etherdevice.h>
19 #include <linux/rtnetlink.h>
20 #include <linux/pm_qos_params.h>
21 #include <linux/crc32.h>
22 #include <net/mac80211.h>
23 #include <asm/unaligned.h>
25 #include "ieee80211_i.h"
26 #include "driver-ops.h"
30 #define IEEE80211_AUTH_TIMEOUT (HZ / 5)
31 #define IEEE80211_AUTH_MAX_TRIES 3
32 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
33 #define IEEE80211_ASSOC_MAX_TRIES 3
34 #define IEEE80211_MAX_PROBE_TRIES 5
37 * beacon loss detection timeout
38 * XXX: should depend on beacon interval
40 #define IEEE80211_BEACON_LOSS_TIME (2 * HZ)
42 * Time the connection can be idle before we probe
43 * it to see if we can still talk to the AP.
45 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
47 * Time we wait for a probe response after sending
48 * a probe request because of beacon loss or for
49 * checking the connection still works.
51 #define IEEE80211_PROBE_WAIT (HZ / 2)
53 #define TMR_RUNNING_TIMER 0
54 #define TMR_RUNNING_CHANSW 1
57 * All cfg80211 functions have to be called outside a locked
58 * section so that they can acquire a lock themselves... This
59 * is much simpler than queuing up things in cfg80211, but we
60 * do need some indirection for that here.
63 /* no action required */
66 /* caller must call cfg80211_send_rx_auth() */
67 RX_MGMT_CFG80211_AUTH,
69 /* caller must call cfg80211_send_rx_assoc() */
70 RX_MGMT_CFG80211_ASSOC,
72 /* caller must call cfg80211_send_deauth() */
73 RX_MGMT_CFG80211_DEAUTH,
75 /* caller must call cfg80211_send_disassoc() */
76 RX_MGMT_CFG80211_DISASSOC,
78 /* caller must tell cfg80211 about internal error */
79 RX_MGMT_CFG80211_ASSOC_ERROR,
83 static inline void ASSERT_MGD_MTX(struct ieee80211_if_managed *ifmgd)
85 WARN_ON(!mutex_is_locked(&ifmgd->mtx));
89 * We can have multiple work items (and connection probing)
90 * scheduling this timer, but we need to take care to only
91 * reschedule it when it should fire _earlier_ than it was
92 * asked for before, or if it's not pending right now. This
93 * function ensures that. Note that it then is required to
94 * run this function for all timeouts after the first one
95 * has happened -- the work that runs from this timer will
98 static void run_again(struct ieee80211_if_managed *ifmgd,
99 unsigned long timeout)
101 ASSERT_MGD_MTX(ifmgd);
103 if (!timer_pending(&ifmgd->timer) ||
104 time_before(timeout, ifmgd->timer.expires))
105 mod_timer(&ifmgd->timer, timeout);
108 static void mod_beacon_timer(struct ieee80211_sub_if_data *sdata)
110 if (sdata->local->hw.flags & IEEE80211_HW_BEACON_FILTER)
113 mod_timer(&sdata->u.mgd.bcn_mon_timer,
114 round_jiffies_up(jiffies + IEEE80211_BEACON_LOSS_TIME));
117 static int ecw2cw(int ecw)
119 return (1 << ecw) - 1;
123 * ieee80211_enable_ht should be called only after the operating band
124 * has been determined as ht configuration depends on the hw's
125 * HT abilities for a specific band.
127 static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
128 struct ieee80211_ht_info *hti,
129 const u8 *bssid, u16 ap_ht_cap_flags)
131 struct ieee80211_local *local = sdata->local;
132 struct ieee80211_supported_band *sband;
133 struct sta_info *sta;
136 bool enable_ht = true, ht_changed;
137 enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
139 sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
141 /* HT is not supported */
142 if (!sband->ht_cap.ht_supported)
145 /* check that channel matches the right operating channel */
146 if (local->hw.conf.channel->center_freq !=
147 ieee80211_channel_to_frequency(hti->control_chan))
151 channel_type = NL80211_CHAN_HT20;
153 if (!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
154 (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
155 (hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) {
156 switch(hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
157 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
158 if (!(local->hw.conf.channel->flags &
159 IEEE80211_CHAN_NO_HT40PLUS))
160 channel_type = NL80211_CHAN_HT40PLUS;
162 case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
163 if (!(local->hw.conf.channel->flags &
164 IEEE80211_CHAN_NO_HT40MINUS))
165 channel_type = NL80211_CHAN_HT40MINUS;
171 ht_changed = conf_is_ht(&local->hw.conf) != enable_ht ||
172 channel_type != local->hw.conf.channel_type;
174 local->oper_channel_type = channel_type;
177 /* channel_type change automatically detected */
178 ieee80211_hw_config(local, 0);
181 sta = sta_info_get(sdata, bssid);
183 rate_control_rate_update(local, sband, sta,
184 IEEE80211_RC_HT_CHANGED);
192 ht_opmode = le16_to_cpu(hti->operation_mode);
194 /* if bss configuration changed store the new one */
195 if (!sdata->ht_opmode_valid ||
196 sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
197 changed |= BSS_CHANGED_HT;
198 sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
199 sdata->ht_opmode_valid = true;
205 /* frame sending functions */
207 static void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data *sdata,
208 const u8 *bssid, u16 stype, u16 reason,
211 struct ieee80211_local *local = sdata->local;
212 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
214 struct ieee80211_mgmt *mgmt;
216 skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*mgmt));
218 printk(KERN_DEBUG "%s: failed to allocate buffer for "
219 "deauth/disassoc frame\n", sdata->name);
222 skb_reserve(skb, local->hw.extra_tx_headroom);
224 mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
226 memcpy(mgmt->da, bssid, ETH_ALEN);
227 memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
228 memcpy(mgmt->bssid, bssid, ETH_ALEN);
229 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | stype);
231 /* u.deauth.reason_code == u.disassoc.reason_code */
232 mgmt->u.deauth.reason_code = cpu_to_le16(reason);
234 if (stype == IEEE80211_STYPE_DEAUTH)
236 __cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
238 cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
241 __cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len);
243 cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len);
244 if (!(ifmgd->flags & IEEE80211_STA_MFP_ENABLED))
245 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
246 ieee80211_tx_skb(sdata, skb);
249 void ieee80211_send_pspoll(struct ieee80211_local *local,
250 struct ieee80211_sub_if_data *sdata)
252 struct ieee80211_pspoll *pspoll;
255 skb = ieee80211_pspoll_get(&local->hw, &sdata->vif);
259 pspoll = (struct ieee80211_pspoll *) skb->data;
260 pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
262 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
263 ieee80211_tx_skb(sdata, skb);
266 void ieee80211_send_nullfunc(struct ieee80211_local *local,
267 struct ieee80211_sub_if_data *sdata,
271 struct ieee80211_hdr_3addr *nullfunc;
273 skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif);
277 nullfunc = (struct ieee80211_hdr_3addr *) skb->data;
279 nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
281 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
282 ieee80211_tx_skb(sdata, skb);
285 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,
286 struct ieee80211_sub_if_data *sdata)
289 struct ieee80211_hdr *nullfunc;
292 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
295 skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
297 printk(KERN_DEBUG "%s: failed to allocate buffer for 4addr "
298 "nullfunc frame\n", sdata->name);
301 skb_reserve(skb, local->hw.extra_tx_headroom);
303 nullfunc = (struct ieee80211_hdr *) skb_put(skb, 30);
304 memset(nullfunc, 0, 30);
305 fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
306 IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
307 nullfunc->frame_control = fc;
308 memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
309 memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
310 memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
311 memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN);
313 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
314 ieee80211_tx_skb(sdata, skb);
317 /* spectrum management related things */
318 static void ieee80211_chswitch_work(struct work_struct *work)
320 struct ieee80211_sub_if_data *sdata =
321 container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
322 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
324 if (!ieee80211_sdata_running(sdata))
327 mutex_lock(&ifmgd->mtx);
328 if (!ifmgd->associated)
331 sdata->local->oper_channel = sdata->local->csa_channel;
332 ieee80211_hw_config(sdata->local, IEEE80211_CONF_CHANGE_CHANNEL);
334 /* XXX: shouldn't really modify cfg80211-owned data! */
335 ifmgd->associated->channel = sdata->local->oper_channel;
337 ieee80211_wake_queues_by_reason(&sdata->local->hw,
338 IEEE80211_QUEUE_STOP_REASON_CSA);
340 ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED;
341 mutex_unlock(&ifmgd->mtx);
344 static void ieee80211_chswitch_timer(unsigned long data)
346 struct ieee80211_sub_if_data *sdata =
347 (struct ieee80211_sub_if_data *) data;
348 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
350 if (sdata->local->quiescing) {
351 set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
355 ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
358 void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
359 struct ieee80211_channel_sw_ie *sw_elem,
360 struct ieee80211_bss *bss)
362 struct cfg80211_bss *cbss =
363 container_of((void *)bss, struct cfg80211_bss, priv);
364 struct ieee80211_channel *new_ch;
365 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
366 int new_freq = ieee80211_channel_to_frequency(sw_elem->new_ch_num);
368 ASSERT_MGD_MTX(ifmgd);
370 if (!ifmgd->associated)
373 if (sdata->local->scanning)
376 /* Disregard subsequent beacons if we are already running a timer
379 if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED)
382 new_ch = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq);
383 if (!new_ch || new_ch->flags & IEEE80211_CHAN_DISABLED)
386 sdata->local->csa_channel = new_ch;
388 if (sw_elem->count <= 1) {
389 ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
391 ieee80211_stop_queues_by_reason(&sdata->local->hw,
392 IEEE80211_QUEUE_STOP_REASON_CSA);
393 ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED;
394 mod_timer(&ifmgd->chswitch_timer,
396 msecs_to_jiffies(sw_elem->count *
397 cbss->beacon_interval));
401 static void ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
402 u16 capab_info, u8 *pwr_constr_elem,
403 u8 pwr_constr_elem_len)
405 struct ieee80211_conf *conf = &sdata->local->hw.conf;
407 if (!(capab_info & WLAN_CAPABILITY_SPECTRUM_MGMT))
410 /* Power constraint IE length should be 1 octet */
411 if (pwr_constr_elem_len != 1)
414 if ((*pwr_constr_elem <= conf->channel->max_power) &&
415 (*pwr_constr_elem != sdata->local->power_constr_level)) {
416 sdata->local->power_constr_level = *pwr_constr_elem;
417 ieee80211_hw_config(sdata->local, 0);
422 static void ieee80211_enable_ps(struct ieee80211_local *local,
423 struct ieee80211_sub_if_data *sdata)
425 struct ieee80211_conf *conf = &local->hw.conf;
428 * If we are scanning right now then the parameters will
429 * take effect when scan finishes.
434 if (conf->dynamic_ps_timeout > 0 &&
435 !(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)) {
436 mod_timer(&local->dynamic_ps_timer, jiffies +
437 msecs_to_jiffies(conf->dynamic_ps_timeout));
439 if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
440 ieee80211_send_nullfunc(local, sdata, 1);
441 conf->flags |= IEEE80211_CONF_PS;
442 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
446 static void ieee80211_change_ps(struct ieee80211_local *local)
448 struct ieee80211_conf *conf = &local->hw.conf;
450 if (local->ps_sdata) {
451 ieee80211_enable_ps(local, local->ps_sdata);
452 } else if (conf->flags & IEEE80211_CONF_PS) {
453 conf->flags &= ~IEEE80211_CONF_PS;
454 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
455 del_timer_sync(&local->dynamic_ps_timer);
456 cancel_work_sync(&local->dynamic_ps_enable_work);
460 /* need to hold RTNL or interface lock */
461 void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
463 struct ieee80211_sub_if_data *sdata, *found = NULL;
466 if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) {
467 local->ps_sdata = NULL;
471 if (!list_empty(&local->work_list)) {
472 local->ps_sdata = NULL;
476 list_for_each_entry(sdata, &local->interfaces, list) {
477 if (!ieee80211_sdata_running(sdata))
479 if (sdata->vif.type != NL80211_IFTYPE_STATION)
485 if (count == 1 && found->u.mgd.powersave &&
486 found->u.mgd.associated &&
487 !(found->u.mgd.flags & (IEEE80211_STA_BEACON_POLL |
488 IEEE80211_STA_CONNECTION_POLL))) {
492 latency = pm_qos_requirement(PM_QOS_NETWORK_LATENCY);
494 beaconint_us = ieee80211_tu_to_usec(
495 found->vif.bss_conf.beacon_int);
497 if (beaconint_us > latency) {
498 local->ps_sdata = NULL;
500 u8 dtimper = found->vif.bss_conf.dtim_period;
504 maxslp = min_t(int, dtimper,
505 latency / beaconint_us);
507 local->hw.conf.max_sleep_period = maxslp;
508 local->ps_sdata = found;
511 local->ps_sdata = NULL;
515 ieee80211_change_ps(local);
518 void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
520 struct ieee80211_local *local =
521 container_of(work, struct ieee80211_local,
522 dynamic_ps_disable_work);
524 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
525 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
526 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
529 ieee80211_wake_queues_by_reason(&local->hw,
530 IEEE80211_QUEUE_STOP_REASON_PS);
533 void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
535 struct ieee80211_local *local =
536 container_of(work, struct ieee80211_local,
537 dynamic_ps_enable_work);
538 struct ieee80211_sub_if_data *sdata = local->ps_sdata;
540 /* can only happen when PS was just disabled anyway */
544 if (local->hw.conf.flags & IEEE80211_CONF_PS)
547 if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
548 ieee80211_send_nullfunc(local, sdata, 1);
550 local->hw.conf.flags |= IEEE80211_CONF_PS;
551 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
554 void ieee80211_dynamic_ps_timer(unsigned long data)
556 struct ieee80211_local *local = (void *) data;
558 if (local->quiescing || local->suspended)
561 ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
565 static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
566 struct ieee80211_if_managed *ifmgd,
567 u8 *wmm_param, size_t wmm_param_len)
569 struct ieee80211_tx_queue_params params;
572 u8 *pos, uapsd_queues = 0;
574 if (local->hw.queues < 4)
580 if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
583 if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
584 uapsd_queues = local->uapsd_queues;
586 count = wmm_param[6] & 0x0f;
587 if (count == ifmgd->wmm_last_param_set)
589 ifmgd->wmm_last_param_set = count;
592 left = wmm_param_len - 8;
594 memset(¶ms, 0, sizeof(params));
597 for (; left >= 4; left -= 4, pos += 4) {
598 int aci = (pos[0] >> 5) & 0x03;
599 int acm = (pos[0] >> 4) & 0x01;
607 local->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
608 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
614 local->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
615 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
621 local->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
622 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
629 local->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
630 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
635 params.aifs = pos[0] & 0x0f;
636 params.cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
637 params.cw_min = ecw2cw(pos[1] & 0x0f);
638 params.txop = get_unaligned_le16(pos + 2);
639 params.uapsd = uapsd;
641 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
642 printk(KERN_DEBUG "%s: WMM queue=%d aci=%d acm=%d aifs=%d "
643 "cWmin=%d cWmax=%d txop=%d uapsd=%d\n",
644 wiphy_name(local->hw.wiphy), queue, aci, acm,
645 params.aifs, params.cw_min, params.cw_max, params.txop,
648 if (drv_conf_tx(local, queue, ¶ms) && local->ops->conf_tx)
649 printk(KERN_DEBUG "%s: failed to set TX queue "
650 "parameters for queue %d\n",
651 wiphy_name(local->hw.wiphy), queue);
655 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
656 u16 capab, bool erp_valid, u8 erp)
658 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
661 bool use_short_preamble;
665 use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
666 use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
668 use_protection = false;
669 use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
672 use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
673 if (sdata->local->hw.conf.channel->band == IEEE80211_BAND_5GHZ)
674 use_short_slot = true;
676 if (use_protection != bss_conf->use_cts_prot) {
677 bss_conf->use_cts_prot = use_protection;
678 changed |= BSS_CHANGED_ERP_CTS_PROT;
681 if (use_short_preamble != bss_conf->use_short_preamble) {
682 bss_conf->use_short_preamble = use_short_preamble;
683 changed |= BSS_CHANGED_ERP_PREAMBLE;
686 if (use_short_slot != bss_conf->use_short_slot) {
687 bss_conf->use_short_slot = use_short_slot;
688 changed |= BSS_CHANGED_ERP_SLOT;
694 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
695 struct cfg80211_bss *cbss,
696 u32 bss_info_changed)
698 struct ieee80211_bss *bss = (void *)cbss->priv;
699 struct ieee80211_local *local = sdata->local;
701 bss_info_changed |= BSS_CHANGED_ASSOC;
702 /* set timing information */
703 sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
704 sdata->vif.bss_conf.timestamp = cbss->tsf;
705 sdata->vif.bss_conf.dtim_period = bss->dtim_period;
707 bss_info_changed |= BSS_CHANGED_BEACON_INT;
708 bss_info_changed |= ieee80211_handle_bss_capability(sdata,
709 cbss->capability, bss->has_erp_value, bss->erp_value);
711 sdata->u.mgd.associated = cbss;
712 memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
714 /* just to be sure */
715 sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL |
716 IEEE80211_STA_BEACON_POLL);
719 * Always handle WMM once after association regardless
720 * of the first value the AP uses. Setting -1 here has
721 * that effect because the AP values is an unsigned
724 sdata->u.mgd.wmm_last_param_set = -1;
726 ieee80211_led_assoc(local, 1);
728 sdata->vif.bss_conf.assoc = 1;
730 * For now just always ask the driver to update the basic rateset
731 * when we have associated, we aren't checking whether it actually
734 bss_info_changed |= BSS_CHANGED_BASIC_RATES;
736 /* And the BSSID changed - we're associated now */
737 bss_info_changed |= BSS_CHANGED_BSSID;
739 ieee80211_bss_info_change_notify(sdata, bss_info_changed);
741 mutex_lock(&local->iflist_mtx);
742 ieee80211_recalc_ps(local, -1);
743 ieee80211_recalc_smps(local, sdata);
744 mutex_unlock(&local->iflist_mtx);
746 netif_tx_start_all_queues(sdata->dev);
747 netif_carrier_on(sdata->dev);
750 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata)
752 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
753 struct ieee80211_local *local = sdata->local;
754 struct sta_info *sta;
755 u32 changed = 0, config_changed = 0;
758 ASSERT_MGD_MTX(ifmgd);
760 if (WARN_ON(!ifmgd->associated))
763 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
765 ifmgd->associated = NULL;
766 memset(ifmgd->bssid, 0, ETH_ALEN);
769 * we need to commit the associated = NULL change because the
770 * scan code uses that to determine whether this iface should
771 * go to/wake up from powersave or not -- and could otherwise
772 * wake the queues erroneously.
777 * Thus, we can only afterwards stop the queues -- to account
778 * for the case where another CPU is finishing a scan at this
779 * time -- we don't want the scan code to enable queues.
782 netif_tx_stop_all_queues(sdata->dev);
783 netif_carrier_off(sdata->dev);
786 sta = sta_info_get(sdata, bssid);
788 ieee80211_sta_tear_down_BA_sessions(sta);
791 changed |= ieee80211_reset_erp_info(sdata);
793 ieee80211_led_assoc(local, 0);
794 changed |= BSS_CHANGED_ASSOC;
795 sdata->vif.bss_conf.assoc = false;
797 ieee80211_set_wmm_default(sdata);
799 /* channel(_type) changes are handled by ieee80211_hw_config */
800 local->oper_channel_type = NL80211_CHAN_NO_HT;
802 /* on the next assoc, re-program HT parameters */
803 sdata->ht_opmode_valid = false;
805 local->power_constr_level = 0;
807 del_timer_sync(&local->dynamic_ps_timer);
808 cancel_work_sync(&local->dynamic_ps_enable_work);
810 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
811 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
812 config_changed |= IEEE80211_CONF_CHANGE_PS;
815 ieee80211_hw_config(local, config_changed);
817 /* And the BSSID changed -- not very interesting here */
818 changed |= BSS_CHANGED_BSSID;
819 ieee80211_bss_info_change_notify(sdata, changed);
823 sta = sta_info_get(sdata, bssid);
829 sta_info_unlink(&sta);
833 sta_info_destroy(sta);
836 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
837 struct ieee80211_hdr *hdr)
840 * We can postpone the mgd.timer whenever receiving unicast frames
841 * from AP because we know that the connection is working both ways
842 * at that time. But multicast frames (and hence also beacons) must
843 * be ignored here, because we need to trigger the timer during
844 * data idle periods for sending the periodic probe request to the
845 * AP we're connected to.
847 if (is_multicast_ether_addr(hdr->addr1))
850 mod_timer(&sdata->u.mgd.conn_mon_timer,
851 round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
854 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
856 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
859 ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
860 ieee80211_send_probe_req(sdata, ifmgd->associated->bssid,
861 ssid + 2, ssid[1], NULL, 0);
863 ifmgd->probe_send_count++;
864 ifmgd->probe_timeout = jiffies + IEEE80211_PROBE_WAIT;
865 run_again(ifmgd, ifmgd->probe_timeout);
868 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
871 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
872 bool already = false;
874 if (!ieee80211_sdata_running(sdata))
877 if (sdata->local->scanning)
880 if (sdata->local->tmp_channel)
883 mutex_lock(&ifmgd->mtx);
885 if (!ifmgd->associated)
888 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
889 if (beacon && net_ratelimit())
890 printk(KERN_DEBUG "%s: detected beacon loss from AP "
891 "- sending probe request\n", sdata->name);
895 * The driver/our work has already reported this event or the
896 * connection monitoring has kicked in and we have already sent
897 * a probe request. Or maybe the AP died and the driver keeps
898 * reporting until we disassociate...
900 * In either case we have to ignore the current call to this
901 * function (except for setting the correct probe reason bit)
902 * because otherwise we would reset the timer every time and
903 * never check whether we received a probe response!
905 if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
906 IEEE80211_STA_CONNECTION_POLL))
910 ifmgd->flags |= IEEE80211_STA_BEACON_POLL;
912 ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
917 mutex_lock(&sdata->local->iflist_mtx);
918 ieee80211_recalc_ps(sdata->local, -1);
919 mutex_unlock(&sdata->local->iflist_mtx);
921 ifmgd->probe_send_count = 0;
922 ieee80211_mgd_probe_ap_send(sdata);
924 mutex_unlock(&ifmgd->mtx);
927 void ieee80211_beacon_loss_work(struct work_struct *work)
929 struct ieee80211_sub_if_data *sdata =
930 container_of(work, struct ieee80211_sub_if_data,
931 u.mgd.beacon_loss_work);
933 ieee80211_mgd_probe_ap(sdata, true);
936 void ieee80211_beacon_loss(struct ieee80211_vif *vif)
938 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
940 ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.beacon_loss_work);
942 EXPORT_SYMBOL(ieee80211_beacon_loss);
944 static enum rx_mgmt_action __must_check
945 ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
946 struct ieee80211_mgmt *mgmt, size_t len)
948 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
949 const u8 *bssid = NULL;
955 ASSERT_MGD_MTX(ifmgd);
957 bssid = ifmgd->associated->bssid;
959 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
961 printk(KERN_DEBUG "%s: deauthenticated from %pM (Reason: %u)\n",
962 sdata->name, bssid, reason_code);
964 ieee80211_set_disassoc(sdata);
965 ieee80211_recalc_idle(sdata->local);
967 return RX_MGMT_CFG80211_DEAUTH;
971 static enum rx_mgmt_action __must_check
972 ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
973 struct ieee80211_mgmt *mgmt, size_t len)
975 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
981 ASSERT_MGD_MTX(ifmgd);
983 if (WARN_ON(!ifmgd->associated))
986 if (WARN_ON(memcmp(ifmgd->associated->bssid, mgmt->sa, ETH_ALEN)))
989 reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
991 printk(KERN_DEBUG "%s: disassociated from %pM (Reason: %u)\n",
992 sdata->name, mgmt->sa, reason_code);
994 ieee80211_set_disassoc(sdata);
995 ieee80211_recalc_idle(sdata->local);
996 return RX_MGMT_CFG80211_DISASSOC;
1000 static bool ieee80211_assoc_success(struct ieee80211_work *wk,
1001 struct ieee80211_mgmt *mgmt, size_t len)
1003 struct ieee80211_sub_if_data *sdata = wk->sdata;
1004 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1005 struct ieee80211_local *local = sdata->local;
1006 struct ieee80211_supported_band *sband;
1007 struct sta_info *sta;
1008 struct cfg80211_bss *cbss = wk->assoc.bss;
1010 u32 rates, basic_rates;
1011 u16 capab_info, aid;
1012 struct ieee802_11_elems elems;
1013 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1016 bool have_higher_than_11mbit = false;
1017 u16 ap_ht_cap_flags;
1019 /* AssocResp and ReassocResp have identical structure */
1021 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
1022 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
1024 if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
1025 printk(KERN_DEBUG "%s: invalid aid value %d; bits 15:14 not "
1026 "set\n", sdata->name, aid);
1027 aid &= ~(BIT(15) | BIT(14));
1029 pos = mgmt->u.assoc_resp.variable;
1030 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
1032 if (!elems.supp_rates) {
1033 printk(KERN_DEBUG "%s: no SuppRates element in AssocResp\n",
1040 sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL);
1042 printk(KERN_DEBUG "%s: failed to alloc STA entry for"
1043 " the AP\n", sdata->name);
1047 set_sta_flags(sta, WLAN_STA_AUTH | WLAN_STA_ASSOC |
1049 if (!(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
1050 set_sta_flags(sta, WLAN_STA_AUTHORIZED);
1054 sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
1056 for (i = 0; i < elems.supp_rates_len; i++) {
1057 int rate = (elems.supp_rates[i] & 0x7f) * 5;
1058 bool is_basic = !!(elems.supp_rates[i] & 0x80);
1061 have_higher_than_11mbit = true;
1063 for (j = 0; j < sband->n_bitrates; j++) {
1064 if (sband->bitrates[j].bitrate == rate) {
1067 basic_rates |= BIT(j);
1073 for (i = 0; i < elems.ext_supp_rates_len; i++) {
1074 int rate = (elems.ext_supp_rates[i] & 0x7f) * 5;
1075 bool is_basic = !!(elems.ext_supp_rates[i] & 0x80);
1078 have_higher_than_11mbit = true;
1080 for (j = 0; j < sband->n_bitrates; j++) {
1081 if (sband->bitrates[j].bitrate == rate) {
1084 basic_rates |= BIT(j);
1090 sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
1091 sdata->vif.bss_conf.basic_rates = basic_rates;
1093 /* cf. IEEE 802.11 9.2.12 */
1094 if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ &&
1095 have_higher_than_11mbit)
1096 sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
1098 sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
1100 if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_11N))
1101 ieee80211_ht_cap_ie_to_sta_ht_cap(sband,
1102 elems.ht_cap_elem, &sta->sta.ht_cap);
1104 ap_ht_cap_flags = sta->sta.ht_cap.cap;
1106 rate_control_rate_init(sta);
1108 if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED)
1109 set_sta_flags(sta, WLAN_STA_MFP);
1111 if (elems.wmm_param)
1112 set_sta_flags(sta, WLAN_STA_WME);
1114 err = sta_info_insert(sta);
1117 printk(KERN_DEBUG "%s: failed to insert STA entry for"
1118 " the AP (error %d)\n", sdata->name, err);
1122 if (elems.wmm_param)
1123 ieee80211_sta_wmm_params(local, ifmgd, elems.wmm_param,
1124 elems.wmm_param_len);
1126 ieee80211_set_wmm_default(sdata);
1128 local->oper_channel = wk->chan;
1130 if (elems.ht_info_elem && elems.wmm_param &&
1131 (sdata->local->hw.queues >= 4) &&
1132 !(ifmgd->flags & IEEE80211_STA_DISABLE_11N))
1133 changed |= ieee80211_enable_ht(sdata, elems.ht_info_elem,
1134 cbss->bssid, ap_ht_cap_flags);
1136 /* set AID and assoc capability,
1137 * ieee80211_set_associated() will tell the driver */
1138 bss_conf->aid = aid;
1139 bss_conf->assoc_capability = capab_info;
1140 ieee80211_set_associated(sdata, cbss, changed);
1143 * If we're using 4-addr mode, let the AP know that we're
1144 * doing so, so that it can create the STA VLAN on its side
1146 if (ifmgd->use_4addr)
1147 ieee80211_send_4addr_nullfunc(local, sdata);
1150 * Start timer to probe the connection to the AP now.
1151 * Also start the timer that will detect beacon loss.
1153 ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt);
1154 mod_beacon_timer(sdata);
1160 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
1161 struct ieee80211_mgmt *mgmt,
1163 struct ieee80211_rx_status *rx_status,
1164 struct ieee802_11_elems *elems,
1167 struct ieee80211_local *local = sdata->local;
1169 struct ieee80211_bss *bss;
1170 struct ieee80211_channel *channel;
1172 if (elems->ds_params && elems->ds_params_len == 1)
1173 freq = ieee80211_channel_to_frequency(elems->ds_params[0]);
1175 freq = rx_status->freq;
1177 channel = ieee80211_get_channel(local->hw.wiphy, freq);
1179 if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
1182 bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems,
1185 ieee80211_rx_bss_put(local, bss);
1187 if (!sdata->u.mgd.associated)
1190 if (elems->ch_switch_elem && (elems->ch_switch_elem_len == 3) &&
1191 (memcmp(mgmt->bssid, sdata->u.mgd.associated->bssid,
1193 struct ieee80211_channel_sw_ie *sw_elem =
1194 (struct ieee80211_channel_sw_ie *)elems->ch_switch_elem;
1195 ieee80211_sta_process_chanswitch(sdata, sw_elem, bss);
1200 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
1201 struct sk_buff *skb)
1203 struct ieee80211_mgmt *mgmt = (void *)skb->data;
1204 struct ieee80211_if_managed *ifmgd;
1205 struct ieee80211_rx_status *rx_status = (void *) skb->cb;
1206 size_t baselen, len = skb->len;
1207 struct ieee802_11_elems elems;
1209 ifmgd = &sdata->u.mgd;
1211 ASSERT_MGD_MTX(ifmgd);
1213 if (memcmp(mgmt->da, sdata->vif.addr, ETH_ALEN))
1214 return; /* ignore ProbeResp to foreign address */
1216 baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
1220 ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
1223 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false);
1225 if (ifmgd->associated &&
1226 memcmp(mgmt->bssid, ifmgd->associated->bssid, ETH_ALEN) == 0 &&
1227 ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
1228 IEEE80211_STA_CONNECTION_POLL)) {
1229 ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
1230 IEEE80211_STA_BEACON_POLL);
1231 mutex_lock(&sdata->local->iflist_mtx);
1232 ieee80211_recalc_ps(sdata->local, -1);
1233 mutex_unlock(&sdata->local->iflist_mtx);
1235 * We've received a probe response, but are not sure whether
1236 * we have or will be receiving any beacons or data, so let's
1237 * schedule the timers again, just in case.
1239 mod_beacon_timer(sdata);
1240 mod_timer(&ifmgd->conn_mon_timer,
1241 round_jiffies_up(jiffies +
1242 IEEE80211_CONNECTION_IDLE_TIME));
1247 * This is the canonical list of information elements we care about,
1248 * the filter code also gives us all changes to the Microsoft OUI
1249 * (00:50:F2) vendor IE which is used for WMM which we need to track.
1251 * We implement beacon filtering in software since that means we can
1252 * avoid processing the frame here and in cfg80211, and userspace
1253 * will not be able to tell whether the hardware supports it or not.
1255 * XXX: This list needs to be dynamic -- userspace needs to be able to
1256 * add items it requires. It also needs to be able to tell us to
1257 * look out for other vendor IEs.
1259 static const u64 care_about_ies =
1260 (1ULL << WLAN_EID_COUNTRY) |
1261 (1ULL << WLAN_EID_ERP_INFO) |
1262 (1ULL << WLAN_EID_CHANNEL_SWITCH) |
1263 (1ULL << WLAN_EID_PWR_CONSTRAINT) |
1264 (1ULL << WLAN_EID_HT_CAPABILITY) |
1265 (1ULL << WLAN_EID_HT_INFORMATION);
1267 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
1268 struct ieee80211_mgmt *mgmt,
1270 struct ieee80211_rx_status *rx_status)
1272 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1274 struct ieee802_11_elems elems;
1275 struct ieee80211_local *local = sdata->local;
1277 bool erp_valid, directed_tim = false;
1282 ASSERT_MGD_MTX(ifmgd);
1284 /* Process beacon from the current BSS */
1285 baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
1289 if (rx_status->freq != local->hw.conf.channel->center_freq)
1293 * We might have received a number of frames, among them a
1294 * disassoc frame and a beacon...
1296 if (!ifmgd->associated)
1299 bssid = ifmgd->associated->bssid;
1302 * And in theory even frames from a different AP we were just
1303 * associated to a split-second ago!
1305 if (memcmp(bssid, mgmt->bssid, ETH_ALEN) != 0)
1308 if (ifmgd->flags & IEEE80211_STA_BEACON_POLL) {
1309 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1310 if (net_ratelimit()) {
1311 printk(KERN_DEBUG "%s: cancelling probereq poll due "
1312 "to a received beacon\n", sdata->name);
1315 ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL;
1316 mutex_lock(&local->iflist_mtx);
1317 ieee80211_recalc_ps(local, -1);
1318 mutex_unlock(&local->iflist_mtx);
1322 * Push the beacon loss detection into the future since
1323 * we are processing a beacon from the AP just now.
1325 mod_beacon_timer(sdata);
1327 ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
1328 ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
1329 len - baselen, &elems,
1330 care_about_ies, ncrc);
1332 if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
1333 directed_tim = ieee80211_check_tim(elems.tim, elems.tim_len,
1336 if (ncrc != ifmgd->beacon_crc) {
1337 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems,
1340 ieee80211_sta_wmm_params(local, ifmgd, elems.wmm_param,
1341 elems.wmm_param_len);
1344 if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) {
1346 if (local->hw.conf.dynamic_ps_timeout > 0) {
1347 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
1348 ieee80211_hw_config(local,
1349 IEEE80211_CONF_CHANGE_PS);
1350 ieee80211_send_nullfunc(local, sdata, 0);
1352 local->pspolling = true;
1355 * Here is assumed that the driver will be
1356 * able to send ps-poll frame and receive a
1357 * response even though power save mode is
1358 * enabled, but some drivers might require
1359 * to disable power save here. This needs
1360 * to be investigated.
1362 ieee80211_send_pspoll(local, sdata);
1367 if (ncrc == ifmgd->beacon_crc)
1369 ifmgd->beacon_crc = ncrc;
1371 if (elems.erp_info && elems.erp_info_len >= 1) {
1373 erp_value = elems.erp_info[0];
1377 changed |= ieee80211_handle_bss_capability(sdata,
1378 le16_to_cpu(mgmt->u.beacon.capab_info),
1379 erp_valid, erp_value);
1382 if (elems.ht_cap_elem && elems.ht_info_elem && elems.wmm_param &&
1383 !(ifmgd->flags & IEEE80211_STA_DISABLE_11N)) {
1384 struct sta_info *sta;
1385 struct ieee80211_supported_band *sband;
1386 u16 ap_ht_cap_flags;
1390 sta = sta_info_get(sdata, bssid);
1391 if (WARN_ON(!sta)) {
1396 sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
1398 ieee80211_ht_cap_ie_to_sta_ht_cap(sband,
1399 elems.ht_cap_elem, &sta->sta.ht_cap);
1401 ap_ht_cap_flags = sta->sta.ht_cap.cap;
1405 changed |= ieee80211_enable_ht(sdata, elems.ht_info_elem,
1406 bssid, ap_ht_cap_flags);
1409 /* Note: country IE parsing is done for us by cfg80211 */
1410 if (elems.country_elem) {
1411 /* TODO: IBSS also needs this */
1412 if (elems.pwr_constr_elem)
1413 ieee80211_handle_pwr_constr(sdata,
1414 le16_to_cpu(mgmt->u.probe_resp.capab_info),
1415 elems.pwr_constr_elem,
1416 elems.pwr_constr_elem_len);
1419 ieee80211_bss_info_change_notify(sdata, changed);
1422 ieee80211_rx_result ieee80211_sta_rx_mgmt(struct ieee80211_sub_if_data *sdata,
1423 struct sk_buff *skb)
1425 struct ieee80211_local *local = sdata->local;
1426 struct ieee80211_mgmt *mgmt;
1430 return RX_DROP_MONITOR;
1432 mgmt = (struct ieee80211_mgmt *) skb->data;
1433 fc = le16_to_cpu(mgmt->frame_control);
1435 switch (fc & IEEE80211_FCTL_STYPE) {
1436 case IEEE80211_STYPE_PROBE_RESP:
1437 case IEEE80211_STYPE_BEACON:
1438 case IEEE80211_STYPE_DEAUTH:
1439 case IEEE80211_STYPE_DISASSOC:
1440 case IEEE80211_STYPE_ACTION:
1441 skb_queue_tail(&sdata->u.mgd.skb_queue, skb);
1442 ieee80211_queue_work(&local->hw, &sdata->u.mgd.work);
1446 return RX_DROP_MONITOR;
1449 static void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
1450 struct sk_buff *skb)
1452 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1453 struct ieee80211_rx_status *rx_status;
1454 struct ieee80211_mgmt *mgmt;
1455 enum rx_mgmt_action rma = RX_MGMT_NONE;
1458 rx_status = (struct ieee80211_rx_status *) skb->cb;
1459 mgmt = (struct ieee80211_mgmt *) skb->data;
1460 fc = le16_to_cpu(mgmt->frame_control);
1462 mutex_lock(&ifmgd->mtx);
1464 if (ifmgd->associated &&
1465 memcmp(ifmgd->associated->bssid, mgmt->bssid, ETH_ALEN) == 0) {
1466 switch (fc & IEEE80211_FCTL_STYPE) {
1467 case IEEE80211_STYPE_BEACON:
1468 ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len,
1471 case IEEE80211_STYPE_PROBE_RESP:
1472 ieee80211_rx_mgmt_probe_resp(sdata, skb);
1474 case IEEE80211_STYPE_DEAUTH:
1475 rma = ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
1477 case IEEE80211_STYPE_DISASSOC:
1478 rma = ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
1480 case IEEE80211_STYPE_ACTION:
1481 /* XXX: differentiate, can only happen for CSA now! */
1482 ieee80211_sta_process_chanswitch(sdata,
1483 &mgmt->u.action.u.chan_switch.sw_elem,
1484 (void *)ifmgd->associated->priv);
1487 mutex_unlock(&ifmgd->mtx);
1493 case RX_MGMT_CFG80211_DEAUTH:
1494 cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
1496 case RX_MGMT_CFG80211_DISASSOC:
1497 cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len);
1500 WARN(1, "unexpected: %d", rma);
1505 mutex_unlock(&ifmgd->mtx);
1507 if (skb->len >= 24 + 2 /* mgmt + deauth reason */ &&
1508 (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DEAUTH)
1509 cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
1515 static void ieee80211_sta_timer(unsigned long data)
1517 struct ieee80211_sub_if_data *sdata =
1518 (struct ieee80211_sub_if_data *) data;
1519 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1520 struct ieee80211_local *local = sdata->local;
1522 if (local->quiescing) {
1523 set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
1527 ieee80211_queue_work(&local->hw, &ifmgd->work);
1530 static void ieee80211_sta_work(struct work_struct *work)
1532 struct ieee80211_sub_if_data *sdata =
1533 container_of(work, struct ieee80211_sub_if_data, u.mgd.work);
1534 struct ieee80211_local *local = sdata->local;
1535 struct ieee80211_if_managed *ifmgd;
1536 struct sk_buff *skb;
1538 if (!ieee80211_sdata_running(sdata))
1541 if (local->scanning)
1544 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
1548 * ieee80211_queue_work() should have picked up most cases,
1549 * here we'll pick the the rest.
1551 if (WARN(local->suspended, "STA MLME work scheduled while "
1552 "going to suspend\n"))
1555 ifmgd = &sdata->u.mgd;
1557 /* first process frames to avoid timing out while a frame is pending */
1558 while ((skb = skb_dequeue(&ifmgd->skb_queue)))
1559 ieee80211_sta_rx_queued_mgmt(sdata, skb);
1561 /* then process the rest of the work */
1562 mutex_lock(&ifmgd->mtx);
1564 if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
1565 IEEE80211_STA_CONNECTION_POLL) &&
1566 ifmgd->associated) {
1569 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
1570 if (time_is_after_jiffies(ifmgd->probe_timeout))
1571 run_again(ifmgd, ifmgd->probe_timeout);
1573 else if (ifmgd->probe_send_count < IEEE80211_MAX_PROBE_TRIES) {
1574 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1575 printk(KERN_DEBUG "No probe response from AP %pM"
1576 " after %dms, try %d\n", bssid,
1577 (1000 * IEEE80211_PROBE_WAIT)/HZ,
1578 ifmgd->probe_send_count);
1580 ieee80211_mgd_probe_ap_send(sdata);
1583 * We actually lost the connection ... or did we?
1586 ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
1587 IEEE80211_STA_BEACON_POLL);
1588 printk(KERN_DEBUG "No probe response from AP %pM"
1589 " after %dms, disconnecting.\n",
1590 bssid, (1000 * IEEE80211_PROBE_WAIT)/HZ);
1591 ieee80211_set_disassoc(sdata);
1592 ieee80211_recalc_idle(local);
1593 mutex_unlock(&ifmgd->mtx);
1595 * must be outside lock due to cfg80211,
1596 * but that's not a problem.
1598 ieee80211_send_deauth_disassoc(sdata, bssid,
1599 IEEE80211_STYPE_DEAUTH,
1600 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
1602 mutex_lock(&ifmgd->mtx);
1606 mutex_unlock(&ifmgd->mtx);
1609 static void ieee80211_sta_bcn_mon_timer(unsigned long data)
1611 struct ieee80211_sub_if_data *sdata =
1612 (struct ieee80211_sub_if_data *) data;
1613 struct ieee80211_local *local = sdata->local;
1615 if (local->quiescing)
1618 ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.beacon_loss_work);
1621 static void ieee80211_sta_conn_mon_timer(unsigned long data)
1623 struct ieee80211_sub_if_data *sdata =
1624 (struct ieee80211_sub_if_data *) data;
1625 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1626 struct ieee80211_local *local = sdata->local;
1628 if (local->quiescing)
1631 ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
1634 static void ieee80211_sta_monitor_work(struct work_struct *work)
1636 struct ieee80211_sub_if_data *sdata =
1637 container_of(work, struct ieee80211_sub_if_data,
1638 u.mgd.monitor_work);
1640 ieee80211_mgd_probe_ap(sdata, false);
1643 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
1645 if (sdata->vif.type == NL80211_IFTYPE_STATION) {
1646 sdata->u.mgd.flags &= ~(IEEE80211_STA_BEACON_POLL |
1647 IEEE80211_STA_CONNECTION_POLL);
1649 /* let's probe the connection once */
1650 ieee80211_queue_work(&sdata->local->hw,
1651 &sdata->u.mgd.monitor_work);
1652 /* and do all the other regular work too */
1653 ieee80211_queue_work(&sdata->local->hw,
1654 &sdata->u.mgd.work);
1659 void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
1661 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1664 * we need to use atomic bitops for the running bits
1665 * only because both timers might fire at the same
1666 * time -- the code here is properly synchronised.
1669 cancel_work_sync(&ifmgd->work);
1670 cancel_work_sync(&ifmgd->beacon_loss_work);
1671 if (del_timer_sync(&ifmgd->timer))
1672 set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
1674 cancel_work_sync(&ifmgd->chswitch_work);
1675 if (del_timer_sync(&ifmgd->chswitch_timer))
1676 set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
1678 cancel_work_sync(&ifmgd->monitor_work);
1679 /* these will just be re-established on connection */
1680 del_timer_sync(&ifmgd->conn_mon_timer);
1681 del_timer_sync(&ifmgd->bcn_mon_timer);
1684 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
1686 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1688 if (test_and_clear_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running))
1689 add_timer(&ifmgd->timer);
1690 if (test_and_clear_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running))
1691 add_timer(&ifmgd->chswitch_timer);
1695 /* interface setup */
1696 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
1698 struct ieee80211_if_managed *ifmgd;
1700 ifmgd = &sdata->u.mgd;
1701 INIT_WORK(&ifmgd->work, ieee80211_sta_work);
1702 INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
1703 INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
1704 INIT_WORK(&ifmgd->beacon_loss_work, ieee80211_beacon_loss_work);
1705 setup_timer(&ifmgd->timer, ieee80211_sta_timer,
1706 (unsigned long) sdata);
1707 setup_timer(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer,
1708 (unsigned long) sdata);
1709 setup_timer(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer,
1710 (unsigned long) sdata);
1711 setup_timer(&ifmgd->chswitch_timer, ieee80211_chswitch_timer,
1712 (unsigned long) sdata);
1713 skb_queue_head_init(&ifmgd->skb_queue);
1717 mutex_init(&ifmgd->mtx);
1719 if (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS)
1720 ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
1722 ifmgd->req_smps = IEEE80211_SMPS_OFF;
1725 /* scan finished notification */
1726 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
1728 struct ieee80211_sub_if_data *sdata = local->scan_sdata;
1730 /* Restart STA timers */
1732 list_for_each_entry_rcu(sdata, &local->interfaces, list)
1733 ieee80211_restart_sta_timer(sdata);
1737 int ieee80211_max_network_latency(struct notifier_block *nb,
1738 unsigned long data, void *dummy)
1740 s32 latency_usec = (s32) data;
1741 struct ieee80211_local *local =
1742 container_of(nb, struct ieee80211_local,
1743 network_latency_notifier);
1745 mutex_lock(&local->iflist_mtx);
1746 ieee80211_recalc_ps(local, latency_usec);
1747 mutex_unlock(&local->iflist_mtx);
1753 static enum work_done_result
1754 ieee80211_probe_auth_done(struct ieee80211_work *wk,
1755 struct sk_buff *skb)
1758 cfg80211_send_auth_timeout(wk->sdata->dev, wk->filter_ta);
1759 return WORK_DONE_DESTROY;
1762 if (wk->type == IEEE80211_WORK_AUTH) {
1763 cfg80211_send_rx_auth(wk->sdata->dev, skb->data, skb->len);
1764 return WORK_DONE_DESTROY;
1767 mutex_lock(&wk->sdata->u.mgd.mtx);
1768 ieee80211_rx_mgmt_probe_resp(wk->sdata, skb);
1769 mutex_unlock(&wk->sdata->u.mgd.mtx);
1771 wk->type = IEEE80211_WORK_AUTH;
1772 wk->probe_auth.tries = 0;
1773 return WORK_DONE_REQUEUE;
1776 int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
1777 struct cfg80211_auth_request *req)
1780 struct ieee80211_work *wk;
1783 switch (req->auth_type) {
1784 case NL80211_AUTHTYPE_OPEN_SYSTEM:
1785 auth_alg = WLAN_AUTH_OPEN;
1787 case NL80211_AUTHTYPE_SHARED_KEY:
1788 auth_alg = WLAN_AUTH_SHARED_KEY;
1790 case NL80211_AUTHTYPE_FT:
1791 auth_alg = WLAN_AUTH_FT;
1793 case NL80211_AUTHTYPE_NETWORK_EAP:
1794 auth_alg = WLAN_AUTH_LEAP;
1800 wk = kzalloc(sizeof(*wk) + req->ie_len, GFP_KERNEL);
1804 memcpy(wk->filter_ta, req->bss->bssid, ETH_ALEN);
1806 if (req->ie && req->ie_len) {
1807 memcpy(wk->ie, req->ie, req->ie_len);
1808 wk->ie_len = req->ie_len;
1811 if (req->key && req->key_len) {
1812 wk->probe_auth.key_len = req->key_len;
1813 wk->probe_auth.key_idx = req->key_idx;
1814 memcpy(wk->probe_auth.key, req->key, req->key_len);
1817 ssid = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
1818 memcpy(wk->probe_auth.ssid, ssid + 2, ssid[1]);
1819 wk->probe_auth.ssid_len = ssid[1];
1821 wk->probe_auth.algorithm = auth_alg;
1822 wk->probe_auth.privacy = req->bss->capability & WLAN_CAPABILITY_PRIVACY;
1824 wk->type = IEEE80211_WORK_DIRECT_PROBE;
1825 wk->chan = req->bss->channel;
1827 wk->done = ieee80211_probe_auth_done;
1829 ieee80211_add_work(wk);
1833 static enum work_done_result ieee80211_assoc_done(struct ieee80211_work *wk,
1834 struct sk_buff *skb)
1836 struct ieee80211_mgmt *mgmt;
1840 cfg80211_send_assoc_timeout(wk->sdata->dev, wk->filter_ta);
1841 return WORK_DONE_DESTROY;
1844 mgmt = (void *)skb->data;
1845 status = le16_to_cpu(mgmt->u.assoc_resp.status_code);
1847 if (status == WLAN_STATUS_SUCCESS) {
1848 mutex_lock(&wk->sdata->u.mgd.mtx);
1849 if (!ieee80211_assoc_success(wk, mgmt, skb->len)) {
1850 mutex_unlock(&wk->sdata->u.mgd.mtx);
1851 /* oops -- internal error -- send timeout for now */
1852 cfg80211_send_assoc_timeout(wk->sdata->dev,
1854 return WORK_DONE_DESTROY;
1856 mutex_unlock(&wk->sdata->u.mgd.mtx);
1859 cfg80211_send_rx_assoc(wk->sdata->dev, skb->data, skb->len);
1860 return WORK_DONE_DESTROY;
1863 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
1864 struct cfg80211_assoc_request *req)
1866 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1867 struct ieee80211_bss *bss = (void *)req->bss->priv;
1868 struct ieee80211_work *wk;
1872 mutex_lock(&ifmgd->mtx);
1873 if (ifmgd->associated) {
1874 mutex_unlock(&ifmgd->mtx);
1877 mutex_unlock(&ifmgd->mtx);
1879 wk = kzalloc(sizeof(*wk) + req->ie_len, GFP_KERNEL);
1883 ifmgd->flags &= ~IEEE80211_STA_DISABLE_11N;
1885 for (i = 0; i < req->crypto.n_ciphers_pairwise; i++)
1886 if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
1887 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
1888 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104)
1889 ifmgd->flags |= IEEE80211_STA_DISABLE_11N;
1892 if (req->ie && req->ie_len) {
1893 memcpy(wk->ie, req->ie, req->ie_len);
1894 wk->ie_len = req->ie_len;
1898 wk->assoc.bss = req->bss;
1900 memcpy(wk->filter_ta, req->bss->bssid, ETH_ALEN);
1902 /* new association always uses requested smps mode */
1903 if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
1904 if (ifmgd->powersave)
1905 ifmgd->ap_smps = IEEE80211_SMPS_DYNAMIC;
1907 ifmgd->ap_smps = IEEE80211_SMPS_OFF;
1909 ifmgd->ap_smps = ifmgd->req_smps;
1911 wk->assoc.smps = ifmgd->ap_smps;
1913 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
1914 * We still associate in non-HT mode (11a/b/g) if any one of these
1915 * ciphers is configured as pairwise.
1916 * We can set this to true for non-11n hardware, that'll be checked
1917 * separately along with the peer capabilities.
1919 wk->assoc.use_11n = !(ifmgd->flags & IEEE80211_STA_DISABLE_11N);
1920 wk->assoc.capability = req->bss->capability;
1921 wk->assoc.wmm_used = bss->wmm_used;
1922 wk->assoc.supp_rates = bss->supp_rates;
1923 wk->assoc.supp_rates_len = bss->supp_rates_len;
1924 wk->assoc.ht_information_ie =
1925 ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_INFORMATION);
1927 if (bss->wmm_used && bss->uapsd_supported &&
1928 (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)) {
1929 wk->assoc.uapsd_used = true;
1930 ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
1932 wk->assoc.uapsd_used = false;
1933 ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
1936 ssid = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
1937 memcpy(wk->assoc.ssid, ssid + 2, ssid[1]);
1938 wk->assoc.ssid_len = ssid[1];
1940 if (req->prev_bssid)
1941 memcpy(wk->assoc.prev_bssid, req->prev_bssid, ETH_ALEN);
1943 wk->type = IEEE80211_WORK_ASSOC;
1944 wk->chan = req->bss->channel;
1946 wk->done = ieee80211_assoc_done;
1949 ifmgd->mfp = IEEE80211_MFP_REQUIRED;
1950 ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
1952 ifmgd->mfp = IEEE80211_MFP_DISABLED;
1953 ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
1956 if (req->crypto.control_port)
1957 ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
1959 ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
1961 ieee80211_add_work(wk);
1965 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
1966 struct cfg80211_deauth_request *req,
1969 struct ieee80211_local *local = sdata->local;
1970 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1971 struct ieee80211_work *wk;
1972 const u8 *bssid = req->bss->bssid;
1974 mutex_lock(&ifmgd->mtx);
1976 if (ifmgd->associated == req->bss) {
1977 bssid = req->bss->bssid;
1978 ieee80211_set_disassoc(sdata);
1979 mutex_unlock(&ifmgd->mtx);
1981 bool not_auth_yet = false;
1983 mutex_unlock(&ifmgd->mtx);
1985 mutex_lock(&local->work_mtx);
1986 list_for_each_entry(wk, &local->work_list, list) {
1987 if (wk->type != IEEE80211_WORK_DIRECT_PROBE)
1989 if (memcmp(req->bss->bssid, wk->filter_ta, ETH_ALEN))
1991 not_auth_yet = true;
1992 list_del(&wk->list);
1996 mutex_unlock(&local->work_mtx);
1999 * If somebody requests authentication and we haven't
2000 * sent out an auth frame yet there's no need to send
2001 * out a deauth frame either. If the state was PROBE,
2002 * then this is the case. If it's AUTH we have sent a
2003 * frame, and if it's IDLE we have completed the auth
2007 __cfg80211_auth_canceled(sdata->dev, bssid);
2012 printk(KERN_DEBUG "%s: deauthenticating from %pM by local choice (reason=%d)\n",
2013 sdata->name, bssid, req->reason_code);
2015 ieee80211_send_deauth_disassoc(sdata, bssid,
2016 IEEE80211_STYPE_DEAUTH, req->reason_code,
2019 ieee80211_recalc_idle(sdata->local);
2024 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
2025 struct cfg80211_disassoc_request *req,
2028 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2030 mutex_lock(&ifmgd->mtx);
2033 * cfg80211 should catch this ... but it's racy since
2034 * we can receive a disassoc frame, process it, hand it
2035 * to cfg80211 while that's in a locked section already
2036 * trying to tell us that the user wants to disconnect.
2038 if (ifmgd->associated != req->bss) {
2039 mutex_unlock(&ifmgd->mtx);
2043 printk(KERN_DEBUG "%s: disassociating from %pM by local choice (reason=%d)\n",
2044 sdata->name, req->bss->bssid, req->reason_code);
2046 ieee80211_set_disassoc(sdata);
2048 mutex_unlock(&ifmgd->mtx);
2050 ieee80211_send_deauth_disassoc(sdata, req->bss->bssid,
2051 IEEE80211_STYPE_DISASSOC, req->reason_code,
2054 ieee80211_recalc_idle(sdata->local);