1 #ifndef __LINUX_NL80211_H
2 #define __LINUX_NL80211_H
4 * 802.11 netlink interface public header
6 * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net>
10 * DOC: Station handling
12 * Stations are added per interface, but a special case exists with VLAN
13 * interfaces. When a station is bound to an AP interface, it may be moved
14 * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
15 * The station is still assumed to belong to the AP interface it was added
18 * TODO: need more info?
22 * enum nl80211_commands - supported nl80211 commands
24 * @NL80211_CMD_UNSPEC: unspecified command to catch errors
26 * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
27 * to get a list of all present wiphys.
28 * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
29 * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME
30 * and/or %NL80211_ATTR_WIPHY_TXQ_PARAMS.
31 * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
32 * or rename notification. Has attributes %NL80211_ATTR_WIPHY and
33 * %NL80211_ATTR_WIPHY_NAME.
34 * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
35 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
37 * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
38 * either a dump request on a %NL80211_ATTR_WIPHY or a specific get
39 * on an %NL80211_ATTR_IFINDEX is supported.
40 * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
41 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
42 * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
43 * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
44 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
45 * be sent from userspace to request creation of a new virtual interface,
46 * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
47 * %NL80211_ATTR_IFNAME.
48 * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
49 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
50 * userspace to request deletion of a virtual interface, then requires
51 * attribute %NL80211_ATTR_IFINDEX.
53 * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
54 * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
55 * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT or
56 * %NL80211_ATTR_KEY_THRESHOLD.
57 * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
58 * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER
60 * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
61 * or %NL80211_ATTR_MAC.
63 * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a
64 * %NL80222_CMD_NEW_BEACON message)
65 * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
66 * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
67 * %NL80211_BEACON_HEAD and %NL80211_BEACON_TAIL attributes.
68 * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
69 * parameters are like for %NL80211_CMD_SET_BEACON.
70 * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
72 * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
73 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
74 * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
75 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
76 * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
77 * the interface identified by %NL80211_ATTR_IFINDEX.
78 * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
79 * or, if no MAC address given, all stations, on the interface identified
80 * by %NL80211_ATTR_IFINDEX.
82 * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
83 * destination %NL80211_ATTR_MAC on the interface identified by
84 * %NL80211_ATTR_IFINDEX.
85 * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to
86 * destination %NL80211_ATTR_MAC on the interface identified by
87 * %NL80211_ATTR_IFINDEX.
88 * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
89 * the interface identified by %NL80211_ATTR_IFINDEX.
90 * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
91 * or, if no MAC address given, all mesh paths, on the interface identified
92 * by %NL80211_ATTR_IFINDEX.
93 * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
94 * %NL80211_ATTR_IFINDEX.
96 * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
97 * after being queried by the kernel. CRDA replies by sending a regulatory
98 * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
99 * current alpha2 if it found a match. It also provides
100 * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
101 * regulatory rule is a nested set of attributes given by
102 * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
103 * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
104 * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
105 * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
106 * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
107 * to the the specified ISO/IEC 3166-1 alpha2 country code. The core will
108 * store this as a valid request and then query userspace for it.
110 * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the
111 * interface identified by %NL80211_ATTR_IFINDEX
113 * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the
114 * interface identified by %NL80211_ATTR_IFINDEX
116 * @NL80211_CMD_MAX: highest used command number
117 * @__NL80211_CMD_AFTER_LAST: internal use
119 enum nl80211_commands {
120 /* don't change the order or add anything inbetween, this is ABI! */
123 NL80211_CMD_GET_WIPHY, /* can dump */
124 NL80211_CMD_SET_WIPHY,
125 NL80211_CMD_NEW_WIPHY,
126 NL80211_CMD_DEL_WIPHY,
128 NL80211_CMD_GET_INTERFACE, /* can dump */
129 NL80211_CMD_SET_INTERFACE,
130 NL80211_CMD_NEW_INTERFACE,
131 NL80211_CMD_DEL_INTERFACE,
138 NL80211_CMD_GET_BEACON,
139 NL80211_CMD_SET_BEACON,
140 NL80211_CMD_NEW_BEACON,
141 NL80211_CMD_DEL_BEACON,
143 NL80211_CMD_GET_STATION,
144 NL80211_CMD_SET_STATION,
145 NL80211_CMD_NEW_STATION,
146 NL80211_CMD_DEL_STATION,
148 NL80211_CMD_GET_MPATH,
149 NL80211_CMD_SET_MPATH,
150 NL80211_CMD_NEW_MPATH,
151 NL80211_CMD_DEL_MPATH,
156 NL80211_CMD_REQ_SET_REG,
158 NL80211_CMD_GET_MESH_PARAMS,
159 NL80211_CMD_SET_MESH_PARAMS,
161 /* add new commands above here */
163 /* used to define NL80211_CMD_MAX below */
164 __NL80211_CMD_AFTER_LAST,
165 NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
169 * Allow user space programs to use #ifdef on new commands by defining them
172 #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
175 * enum nl80211_attrs - nl80211 netlink attributes
177 * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
179 * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
180 * /sys/class/ieee80211/<phyname>/index
181 * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
182 * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
184 * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
185 * @NL80211_ATTR_IFNAME: network interface name
186 * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
188 * @NL80211_ATTR_MAC: MAC address (various uses)
190 * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
191 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
193 * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
194 * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
195 * section 7.3.2.25.1, e.g. 0x000FAC04)
196 * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
197 * CCMP keys, each six bytes in little endian
199 * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
200 * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
201 * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
202 * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
204 * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
205 * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
206 * &enum nl80211_sta_flags.
207 * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
208 * IEEE 802.11 7.3.1.6 (u16).
209 * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
210 * rates as defined by IEEE 802.11 7.3.2.2 but without the length
211 * restriction (at most %NL80211_MAX_SUPP_RATES).
212 * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
213 * to, or the AP interface the station was originally added to to.
214 * @NL80211_ATTR_STA_INFO: information about a station, part of station info
215 * given for %NL80211_CMD_GET_STATION, nested attribute containing
216 * info as possible, see &enum nl80211_sta_info.
218 * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
219 * consisting of a nested array.
221 * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
222 * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link.
223 * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
224 * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
225 * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
226 * &enum nl80211_mpath_info.
228 * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
229 * &enum nl80211_mntr_flags.
231 * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
232 * current regulatory domain should be set to or is already set to.
233 * For example, 'CR', for Costa Rica. This attribute is used by the kernel
234 * to query the CRDA to retrieve one regulatory domain. This attribute can
235 * also be used by userspace to query the kernel for the currently set
236 * regulatory domain. We chose an alpha2 as that is also used by the
237 * IEEE-802.11d country information element to identify a country.
238 * Users can also simply ask the wireless core to set regulatory domain
239 * to a specific alpha2.
240 * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
243 * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
244 * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
246 * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
248 * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
249 * rates in format defined by IEEE 802.11 7.3.2.2 but without the length
250 * restriction (at most %NL80211_MAX_SUPP_RATES).
252 * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
253 * association request when used with NL80211_CMD_NEW_STATION)
255 * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
256 * supported interface types, each a flag attribute with the number
257 * of the interface mode.
259 * @NL80211_ATTR_MAX: highest attribute number currently defined
260 * @__NL80211_ATTR_AFTER_LAST: internal use
263 /* don't change the order or add anything inbetween, this is ABI! */
267 NL80211_ATTR_WIPHY_NAME,
269 NL80211_ATTR_IFINDEX,
275 NL80211_ATTR_KEY_DATA,
276 NL80211_ATTR_KEY_IDX,
277 NL80211_ATTR_KEY_CIPHER,
278 NL80211_ATTR_KEY_SEQ,
279 NL80211_ATTR_KEY_DEFAULT,
281 NL80211_ATTR_BEACON_INTERVAL,
282 NL80211_ATTR_DTIM_PERIOD,
283 NL80211_ATTR_BEACON_HEAD,
284 NL80211_ATTR_BEACON_TAIL,
286 NL80211_ATTR_STA_AID,
287 NL80211_ATTR_STA_FLAGS,
288 NL80211_ATTR_STA_LISTEN_INTERVAL,
289 NL80211_ATTR_STA_SUPPORTED_RATES,
290 NL80211_ATTR_STA_VLAN,
291 NL80211_ATTR_STA_INFO,
293 NL80211_ATTR_WIPHY_BANDS,
295 NL80211_ATTR_MNTR_FLAGS,
297 NL80211_ATTR_MESH_ID,
298 NL80211_ATTR_STA_PLINK_ACTION,
299 NL80211_ATTR_MPATH_NEXT_HOP,
300 NL80211_ATTR_MPATH_INFO,
302 NL80211_ATTR_BSS_CTS_PROT,
303 NL80211_ATTR_BSS_SHORT_PREAMBLE,
304 NL80211_ATTR_BSS_SHORT_SLOT_TIME,
306 NL80211_ATTR_HT_CAPABILITY,
308 NL80211_ATTR_SUPPORTED_IFTYPES,
310 NL80211_ATTR_REG_ALPHA2,
311 NL80211_ATTR_REG_RULES,
313 NL80211_ATTR_MESH_PARAMS,
315 NL80211_ATTR_BSS_BASIC_RATES,
317 NL80211_ATTR_WIPHY_TXQ_PARAMS,
319 /* add attributes here, update the policy in nl80211.c */
321 __NL80211_ATTR_AFTER_LAST,
322 NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
326 * Allow user space programs to use #ifdef on new attributes by defining them
329 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
330 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
331 #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
333 #define NL80211_MAX_SUPP_RATES 32
334 #define NL80211_MAX_SUPP_REG_RULES 32
335 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
336 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
337 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
338 #define NL80211_HT_CAPABILITY_LEN 26
341 * enum nl80211_iftype - (virtual) interface types
343 * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
344 * @NL80211_IFTYPE_ADHOC: independent BSS member
345 * @NL80211_IFTYPE_STATION: managed BSS member
346 * @NL80211_IFTYPE_AP: access point
347 * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points
348 * @NL80211_IFTYPE_WDS: wireless distribution interface
349 * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
350 * @NL80211_IFTYPE_MESH_POINT: mesh point
351 * @NL80211_IFTYPE_MAX: highest interface type number currently defined
352 * @__NL80211_IFTYPE_AFTER_LAST: internal use
354 * These values are used with the %NL80211_ATTR_IFTYPE
355 * to set the type of an interface.
358 enum nl80211_iftype {
359 NL80211_IFTYPE_UNSPECIFIED,
360 NL80211_IFTYPE_ADHOC,
361 NL80211_IFTYPE_STATION,
363 NL80211_IFTYPE_AP_VLAN,
365 NL80211_IFTYPE_MONITOR,
366 NL80211_IFTYPE_MESH_POINT,
369 __NL80211_IFTYPE_AFTER_LAST,
370 NL80211_IFTYPE_MAX = __NL80211_IFTYPE_AFTER_LAST - 1
374 * enum nl80211_sta_flags - station flags
376 * Station flags. When a station is added to an AP interface, it is
377 * assumed to be already associated (and hence authenticated.)
379 * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
380 * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
381 * with short barker preamble
382 * @NL80211_STA_FLAG_WME: station is WME/QoS capable
384 enum nl80211_sta_flags {
385 __NL80211_STA_FLAG_INVALID,
386 NL80211_STA_FLAG_AUTHORIZED,
387 NL80211_STA_FLAG_SHORT_PREAMBLE,
388 NL80211_STA_FLAG_WME,
391 __NL80211_STA_FLAG_AFTER_LAST,
392 NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
396 * enum nl80211_sta_info - station information
398 * These attribute types are used with %NL80211_ATTR_STA_INFO
399 * when getting information about a station.
401 * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
402 * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
403 * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
404 * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
405 * @__NL80211_STA_INFO_AFTER_LAST: internal
406 * @NL80211_STA_INFO_MAX: highest possible station info attribute
408 enum nl80211_sta_info {
409 __NL80211_STA_INFO_INVALID,
410 NL80211_STA_INFO_INACTIVE_TIME,
411 NL80211_STA_INFO_RX_BYTES,
412 NL80211_STA_INFO_TX_BYTES,
413 NL80211_STA_INFO_LLID,
414 NL80211_STA_INFO_PLID,
415 NL80211_STA_INFO_PLINK_STATE,
418 __NL80211_STA_INFO_AFTER_LAST,
419 NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
423 * enum nl80211_mpath_flags - nl80211 mesh path flags
425 * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
426 * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
427 * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN
428 * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
429 * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
431 enum nl80211_mpath_flags {
432 NL80211_MPATH_FLAG_ACTIVE = 1<<0,
433 NL80211_MPATH_FLAG_RESOLVING = 1<<1,
434 NL80211_MPATH_FLAG_DSN_VALID = 1<<2,
435 NL80211_MPATH_FLAG_FIXED = 1<<3,
436 NL80211_MPATH_FLAG_RESOLVED = 1<<4,
440 * enum nl80211_mpath_info - mesh path information
442 * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
443 * information about a mesh path.
445 * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
446 * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination
447 * @NL80211_ATTR_MPATH_DSN: destination sequence number
448 * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path
449 * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now
450 * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in
451 * &enum nl80211_mpath_flags;
452 * @NL80211_ATTR_MPATH_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
453 * @NL80211_ATTR_MPATH_DISCOVERY_RETRIES: mesh path discovery retries
455 enum nl80211_mpath_info {
456 __NL80211_MPATH_INFO_INVALID,
457 NL80211_MPATH_INFO_FRAME_QLEN,
458 NL80211_MPATH_INFO_DSN,
459 NL80211_MPATH_INFO_METRIC,
460 NL80211_MPATH_INFO_EXPTIME,
461 NL80211_MPATH_INFO_FLAGS,
462 NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
463 NL80211_MPATH_INFO_DISCOVERY_RETRIES,
466 __NL80211_MPATH_INFO_AFTER_LAST,
467 NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
471 * enum nl80211_band_attr - band attributes
472 * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
473 * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
474 * an array of nested frequency attributes
475 * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
476 * an array of nested bitrate attributes
477 * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
479 * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
480 * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
481 * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
483 enum nl80211_band_attr {
484 __NL80211_BAND_ATTR_INVALID,
485 NL80211_BAND_ATTR_FREQS,
486 NL80211_BAND_ATTR_RATES,
488 NL80211_BAND_ATTR_HT_MCS_SET,
489 NL80211_BAND_ATTR_HT_CAPA,
490 NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
491 NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
494 __NL80211_BAND_ATTR_AFTER_LAST,
495 NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
498 #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
501 * enum nl80211_frequency_attr - frequency attributes
502 * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
503 * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
505 * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
506 * permitted on this channel in current regulatory domain.
507 * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
508 * on this channel in current regulatory domain.
509 * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
510 * on this channel in current regulatory domain.
511 * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
514 enum nl80211_frequency_attr {
515 __NL80211_FREQUENCY_ATTR_INVALID,
516 NL80211_FREQUENCY_ATTR_FREQ,
517 NL80211_FREQUENCY_ATTR_DISABLED,
518 NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
519 NL80211_FREQUENCY_ATTR_NO_IBSS,
520 NL80211_FREQUENCY_ATTR_RADAR,
521 NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
524 __NL80211_FREQUENCY_ATTR_AFTER_LAST,
525 NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
528 #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
531 * enum nl80211_bitrate_attr - bitrate attributes
532 * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
533 * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
536 enum nl80211_bitrate_attr {
537 __NL80211_BITRATE_ATTR_INVALID,
538 NL80211_BITRATE_ATTR_RATE,
539 NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
542 __NL80211_BITRATE_ATTR_AFTER_LAST,
543 NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
547 * enum nl80211_reg_rule_attr - regulatory rule attributes
548 * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
549 * considerations for a given frequency range. These are the
550 * &enum nl80211_reg_rule_flags.
551 * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
552 * rule in KHz. This is not a center of frequency but an actual regulatory
554 * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
555 * in KHz. This is not a center a frequency but an actual regulatory
557 * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
558 * frequency range, in KHz.
559 * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
560 * for a given frequency range. The value is in mBi (100 * dBi).
561 * If you don't have one then don't send this.
562 * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
563 * a given frequency range. The value is in mBm (100 * dBm).
565 enum nl80211_reg_rule_attr {
566 __NL80211_REG_RULE_ATTR_INVALID,
567 NL80211_ATTR_REG_RULE_FLAGS,
569 NL80211_ATTR_FREQ_RANGE_START,
570 NL80211_ATTR_FREQ_RANGE_END,
571 NL80211_ATTR_FREQ_RANGE_MAX_BW,
573 NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
574 NL80211_ATTR_POWER_RULE_MAX_EIRP,
577 __NL80211_REG_RULE_ATTR_AFTER_LAST,
578 NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
582 * enum nl80211_reg_rule_flags - regulatory rule flags
584 * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
585 * @NL80211_RRF_NO_CCK: CCK modulation not allowed
586 * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
587 * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
588 * @NL80211_RRF_DFS: DFS support is required to be used
589 * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
590 * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
591 * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
592 * @NL80211_RRF_NO_IBSS: no IBSS is allowed
594 enum nl80211_reg_rule_flags {
595 NL80211_RRF_NO_OFDM = 1<<0,
596 NL80211_RRF_NO_CCK = 1<<1,
597 NL80211_RRF_NO_INDOOR = 1<<2,
598 NL80211_RRF_NO_OUTDOOR = 1<<3,
599 NL80211_RRF_DFS = 1<<4,
600 NL80211_RRF_PTP_ONLY = 1<<5,
601 NL80211_RRF_PTMP_ONLY = 1<<6,
602 NL80211_RRF_PASSIVE_SCAN = 1<<7,
603 NL80211_RRF_NO_IBSS = 1<<8,
607 * enum nl80211_mntr_flags - monitor configuration flags
609 * Monitor configuration flags.
611 * @__NL80211_MNTR_FLAG_INVALID: reserved
613 * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
614 * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
615 * @NL80211_MNTR_FLAG_CONTROL: pass control frames
616 * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
617 * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
618 * overrides all other flags.
620 * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
621 * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
623 enum nl80211_mntr_flags {
624 __NL80211_MNTR_FLAG_INVALID,
625 NL80211_MNTR_FLAG_FCSFAIL,
626 NL80211_MNTR_FLAG_PLCPFAIL,
627 NL80211_MNTR_FLAG_CONTROL,
628 NL80211_MNTR_FLAG_OTHER_BSS,
629 NL80211_MNTR_FLAG_COOK_FRAMES,
632 __NL80211_MNTR_FLAG_AFTER_LAST,
633 NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
637 * enum nl80211_meshconf_params - mesh configuration parameters
639 * Mesh configuration parameters
641 * @__NL80211_MESHCONF_INVALID: internal use
643 * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
644 * millisecond units, used by the Peer Link Open message
646 * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in
647 * millisecond units, used by the peer link management to close a peer link
649 * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
652 * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
653 * on this mesh interface
655 * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
656 * open retries that can be sent to establish a new peer link instance in a
659 * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
662 * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
663 * open peer links when we detect compatible mesh peers.
665 * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
666 * containing a PREQ that an MP can send to a particular destination (path
669 * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
672 * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
673 * until giving up on a path discovery (in milliseconds)
675 * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
676 * points receiving a PREQ shall consider the forwarding information from the
677 * root to be valid. (TU = time unit)
679 * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
680 * TUs) during which an MP can send only one action frame containing a PREQ
683 * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
684 * that it takes for an HWMP information element to propagate across the mesh
686 * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
688 * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
690 enum nl80211_meshconf_params {
691 __NL80211_MESHCONF_INVALID,
692 NL80211_MESHCONF_RETRY_TIMEOUT,
693 NL80211_MESHCONF_CONFIRM_TIMEOUT,
694 NL80211_MESHCONF_HOLDING_TIMEOUT,
695 NL80211_MESHCONF_MAX_PEER_LINKS,
696 NL80211_MESHCONF_MAX_RETRIES,
697 NL80211_MESHCONF_TTL,
698 NL80211_MESHCONF_AUTO_OPEN_PLINKS,
699 NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
700 NL80211_MESHCONF_PATH_REFRESH_TIME,
701 NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
702 NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
703 NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
704 NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
707 __NL80211_MESHCONF_ATTR_AFTER_LAST,
708 NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
712 * enum nl80211_txq_attr - TX queue parameter attributes
713 * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
714 * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
715 * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
717 * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
718 * 2^n-1 in the range 1..32767]
719 * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
720 * 2^n-1 in the range 1..32767]
721 * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
722 * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
723 * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
725 enum nl80211_txq_attr {
726 __NL80211_TXQ_ATTR_INVALID,
727 NL80211_TXQ_ATTR_QUEUE,
728 NL80211_TXQ_ATTR_TXOP,
729 NL80211_TXQ_ATTR_CWMIN,
730 NL80211_TXQ_ATTR_CWMAX,
731 NL80211_TXQ_ATTR_AIFS,
734 __NL80211_TXQ_ATTR_AFTER_LAST,
735 NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
745 #endif /* __LINUX_NL80211_H */