1 #ifndef __LINUX_NL80211_H
2 #define __LINUX_NL80211_H
4 * 802.11 netlink interface public header
6 * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
7 * Copyright 2008 Michael Wu <flamingice@sourmilk.net>
8 * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com>
9 * Copyright 2008 Michael Buesch <mb@bu3sch.de>
10 * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
11 * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
12 * Copyright 2008 Colin McCabe <colin@cozybit.com>
14 * Permission to use, copy, modify, and/or distribute this software for any
15 * purpose with or without fee is hereby granted, provided that the above
16 * copyright notice and this permission notice appear in all copies.
18 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
19 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
20 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
21 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
22 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
23 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
24 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
28 #include <linux/types.h>
31 * DOC: Station handling
33 * Stations are added per interface, but a special case exists with VLAN
34 * interfaces. When a station is bound to an AP interface, it may be moved
35 * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN).
36 * The station is still assumed to belong to the AP interface it was added
39 * TODO: need more info?
43 * DOC: Frame transmission/registration support
45 * Frame transmission and registration support exists to allow userspace
46 * management entities such as wpa_supplicant react to management frames
47 * that are not being handled by the kernel. This includes, for example,
48 * certain classes of action frames that cannot be handled in the kernel
49 * for various reasons.
51 * Frame registration is done on a per-interface basis and registrations
52 * cannot be removed other than by closing the socket. It is possible to
53 * specify a registration filter to register, for example, only for a
54 * certain type of action frame. In particular with action frames, those
55 * that userspace registers for will not be returned as unhandled by the
56 * driver, so that the registered application has to take responsibility
59 * The type of frame that can be registered for is also dependent on the
60 * driver and interface type. The frame types are advertised in wiphy
61 * attributes so applications know what to expect.
63 * NOTE: When an interface changes type while registrations are active,
64 * these registrations are ignored until the interface type is
65 * changed again. This means that changing the interface type can
66 * lead to a situation that couldn't otherwise be produced, but
67 * any such registrations will be dormant in the sense that they
68 * will not be serviced, i.e. they will not receive any frames.
70 * Frame transmission allows userspace to send for example the required
71 * responses to action frames. It is subject to some sanity checking,
72 * but many frames can be transmitted. When a frame was transmitted, its
73 * status is indicated to the sending socket.
75 * For more technical details, see the corresponding command descriptions
80 * DOC: Virtual interface / concurrency capabilities
82 * Some devices are able to operate with virtual MACs, they can have
83 * more than one virtual interface. The capability handling for this
84 * is a bit complex though, as there may be a number of restrictions
85 * on the types of concurrency that are supported.
87 * To start with, each device supports the interface types listed in
88 * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the
89 * types there no concurrency is implied.
91 * Once concurrency is desired, more attributes must be observed:
92 * To start with, since some interface types are purely managed in
93 * software, like the AP-VLAN type in mac80211 for example, there's
94 * an additional list of these, they can be added at any time and
95 * are only restricted by some semantic restrictions (e.g. AP-VLAN
96 * cannot be added without a corresponding AP interface). This list
97 * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
99 * Further, the list of supported combinations is exported. This is
100 * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically,
101 * it exports a list of "groups", and at any point in time the
102 * interfaces that are currently active must fall into any one of
103 * the advertised groups. Within each group, there are restrictions
104 * on the number of interfaces of different types that are supported
105 * and also the number of different channels, along with potentially
106 * some other restrictions. See &enum nl80211_if_combination_attrs.
108 * All together, these attributes define the concurrency of virtual
109 * interfaces that a given device supports.
113 * enum nl80211_commands - supported nl80211 commands
115 * @NL80211_CMD_UNSPEC: unspecified command to catch errors
117 * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request
118 * to get a list of all present wiphys.
119 * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
120 * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
121 * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
122 * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT,
123 * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
124 * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
125 * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
126 * instead, the support here is for backward compatibility only.
127 * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
128 * or rename notification. Has attributes %NL80211_ATTR_WIPHY and
129 * %NL80211_ATTR_WIPHY_NAME.
130 * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes
131 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
133 * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
134 * either a dump request on a %NL80211_ATTR_WIPHY or a specific get
135 * on an %NL80211_ATTR_IFINDEX is supported.
136 * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
137 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
138 * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
139 * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX,
140 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also
141 * be sent from userspace to request creation of a new virtual interface,
142 * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and
143 * %NL80211_ATTR_IFNAME.
144 * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
145 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
146 * userspace to request deletion of a virtual interface, then requires
147 * attribute %NL80211_ATTR_IFINDEX.
149 * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
150 * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
151 * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT,
152 * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD.
153 * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA,
154 * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER,
155 * and %NL80211_ATTR_KEY_SEQ attributes.
156 * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX
157 * or %NL80211_ATTR_MAC.
159 * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a
160 * %NL80222_CMD_NEW_BEACON message)
161 * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface
162 * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD,
163 * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes.
164 * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface,
165 * parameters are like for %NL80211_CMD_SET_BEACON.
166 * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it
168 * @NL80211_CMD_GET_STATION: Get station attributes for station identified by
169 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
170 * @NL80211_CMD_SET_STATION: Set station attributes for station identified by
171 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX.
172 * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the
173 * the interface identified by %NL80211_ATTR_IFINDEX.
174 * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
175 * or, if no MAC address given, all stations, on the interface identified
176 * by %NL80211_ATTR_IFINDEX.
178 * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
179 * destination %NL80211_ATTR_MAC on the interface identified by
180 * %NL80211_ATTR_IFINDEX.
181 * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to
182 * destination %NL80211_ATTR_MAC on the interface identified by
183 * %NL80211_ATTR_IFINDEX.
184 * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by
185 * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP.
186 * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by
188 * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the
189 * the interface identified by %NL80211_ATTR_IFINDEX.
190 * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC
191 * or, if no MAC address given, all mesh paths, on the interface identified
192 * by %NL80211_ATTR_IFINDEX.
193 * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by
194 * %NL80211_ATTR_IFINDEX.
196 * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
198 * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
199 * after being queried by the kernel. CRDA replies by sending a regulatory
200 * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
201 * current alpha2 if it found a match. It also provides
202 * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each
203 * regulatory rule is a nested set of attributes given by
204 * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and
205 * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by
206 * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and
207 * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP.
208 * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain
209 * to the specified ISO/IEC 3166-1 alpha2 country code. The core will
210 * store this as a valid request and then query userspace for it.
212 * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
213 * interface identified by %NL80211_ATTR_IFINDEX
215 * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
216 * interface identified by %NL80211_ATTR_IFINDEX
218 * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
219 * interface is identified with %NL80211_ATTR_IFINDEX and the management
220 * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be
221 * added to the end of the specified management frame is specified with
222 * %NL80211_ATTR_IE. If the command succeeds, the requested data will be
223 * added to all specified management frames generated by
224 * kernel/firmware/driver.
225 * Note: This command has been removed and it is only reserved at this
226 * point to avoid re-using existing command number. The functionality this
227 * command was planned for has been provided with cleaner design with the
228 * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
229 * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
230 * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
232 * @NL80211_CMD_GET_SCAN: get scan results
233 * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
234 * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
235 * NL80211_CMD_GET_SCAN and on the "scan" multicast group)
236 * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
237 * partial scan results may be available
239 * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
240 * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
241 * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
242 * are passed, they are used in the probe requests. For
243 * broadcast, a broadcast SSID must be passed (ie. an empty
244 * string). If no SSID is passed, no probe requests are sent and
245 * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES,
246 * if passed, define which channels should be scanned; if not
247 * passed, all channels allowed for the current regulatory domain
248 * are used. Extra IEs can also be passed from the userspace by
249 * using the %NL80211_ATTR_IE attribute.
250 * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT
251 * if scheduled scan is not running.
252 * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan
254 * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has
255 * stopped. The driver may issue this event at any time during a
256 * scheduled scan. One reason for stopping the scan is if the hardware
257 * does not support starting an association or a normal scan while running
258 * a scheduled scan. This event is also sent when the
259 * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
260 * is brought down while a scheduled scan was running.
262 * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
264 * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
265 * NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
267 * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
268 * has been changed and provides details of the request information
269 * that caused the change such as who initiated the regulatory request
270 * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx
271 * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if
272 * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or
273 * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain
274 * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is
275 * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
276 * to (%NL80211_ATTR_REG_ALPHA2).
277 * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon
278 * has been found while world roaming thus enabling active scan or
279 * any mode of operation that initiates TX (beacons) on a channel
280 * where we would not have been able to do either before. As an example
281 * if you are world roaming (regulatory domain set to world or if your
282 * driver is using a custom world roaming regulatory domain) and while
283 * doing a passive scan on the 5 GHz band you find an AP there (if not
284 * on a DFS channel) you will now be able to actively scan for that AP
285 * or use AP mode on your card on that same channel. Note that this will
286 * never be used for channels 1-11 on the 2 GHz band as they are always
287 * enabled world wide. This beacon hint is only sent if your device had
288 * either disabled active scanning or beaconing on a channel. We send to
289 * userspace the wiphy on which we removed a restriction from
290 * (%NL80211_ATTR_WIPHY) and the channel on which this occurred
291 * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER)
292 * the beacon hint was processed.
294 * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
295 * This command is used both as a command (request to authenticate) and
296 * as an event on the "mlme" multicast group indicating completion of the
297 * authentication process.
298 * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
299 * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
300 * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
301 * the SSID (mainly for association, but is included in authentication
302 * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
303 * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
304 * is used to specify the authentication type. %NL80211_ATTR_IE is used to
305 * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
306 * to be added to the frame.
307 * When used as an event, this reports reception of an Authentication
308 * frame in station and IBSS modes when the local MLME processed the
309 * frame, i.e., it was for the local STA and was received in correct
310 * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
311 * MLME SAP interface (kernel providing MLME, userspace SME). The
312 * included %NL80211_ATTR_FRAME attribute contains the management frame
313 * (including both the header and frame body, but not FCS). This event is
314 * also used to indicate if the authentication attempt timed out. In that
315 * case the %NL80211_ATTR_FRAME attribute is replaced with a
316 * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which
317 * pending authentication timed out).
318 * @NL80211_CMD_ASSOCIATE: association request and notification; like
319 * NL80211_CMD_AUTHENTICATE but for Association and Reassociation
320 * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
321 * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
322 * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
323 * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
324 * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
326 * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
327 * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
328 * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
330 * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael
331 * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the
332 * event includes %NL80211_ATTR_MAC to describe the source MAC address of
333 * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key
334 * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and
335 * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this
336 * event matches with MLME-MICHAELMICFAILURE.indication() primitive
338 * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a
339 * FREQ attribute (for the initial frequency if no peer can be found)
340 * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those
341 * should be fixed rather than automatically determined. Can only be
342 * executed on a network interface that is UP, and fixed BSSID/FREQ
343 * may be rejected. Another optional parameter is the beacon interval,
344 * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not
345 * given defaults to 100 TU (102.4ms).
346 * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is
347 * determined by the network interface.
349 * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute
350 * to identify the device, and the TESTDATA blob attribute to pass through
353 * @NL80211_CMD_CONNECT: connection request and notification; this command
354 * requests to connect to a specified network but without separating
355 * auth and assoc steps. For this, you need to specify the SSID in a
356 * %NL80211_ATTR_SSID attribute, and can optionally specify the association
357 * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
358 * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
359 * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
360 * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
361 * It is also sent as an event, with the BSSID and response IEs when the
362 * connection is established or failed to be established. This can be
363 * determined by the STATUS_CODE attribute.
364 * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
365 * sent as an event when the card/driver roamed by itself.
366 * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
367 * userspace that a connection was dropped by the AP or due to other
368 * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
369 * %NL80211_ATTR_REASON_CODE attributes are used.
371 * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
372 * associated with this wiphy must be down and will follow.
374 * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
375 * channel for the specified amount of time. This can be used to do
376 * off-channel operations like transmit a Public Action frame and wait for
377 * a response while being associated to an AP on another channel.
378 * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus
379 * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
380 * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
381 * optionally used to specify additional channel parameters.
382 * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds
383 * to remain on the channel. This command is also used as an event to
384 * notify when the requested duration starts (it may take a while for the
385 * driver to schedule this time due to other concurrent needs for the
387 * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
388 * that will be included with any events pertaining to this request;
389 * the cookie is also used to cancel the request.
390 * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
391 * pending remain-on-channel duration if the desired operation has been
392 * completed prior to expiration of the originally requested duration.
393 * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
394 * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
395 * uniquely identify the request.
396 * This command is also used as an event to notify when a requested
397 * remain-on-channel duration has expired.
399 * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
400 * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
401 * and @NL80211_ATTR_TX_RATES the set of allowed rates.
403 * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames
404 * (via @NL80211_CMD_FRAME) for processing in userspace. This command
405 * requires an interface index, a frame type attribute (optional for
406 * backward compatibility reasons, if not given assumes action frames)
407 * and a match attribute containing the first few bytes of the frame
408 * that should match, e.g. a single byte for only a category match or
409 * four bytes for vendor frames including the OUI. The registration
410 * cannot be dropped, but is removed automatically when the netlink
411 * socket is closed. Multiple registrations can be made.
412 * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
413 * backward compatibility
414 * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
415 * command is used both as a request to transmit a management frame and
416 * as an event indicating reception of a frame that was not processed in
417 * kernel code, but is for us (i.e., which may need to be processed in a
418 * user space application). %NL80211_ATTR_FRAME is used to specify the
419 * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
420 * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on
421 * which channel the frame is to be transmitted or was received. If this
422 * channel is not the current channel (remain-on-channel or the
423 * operational channel) the device will switch to the given channel and
424 * transmit the frame, optionally waiting for a response for the time
425 * specified using %NL80211_ATTR_DURATION. When called, this operation
426 * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
427 * TX status event pertaining to the TX request.
428 * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
429 * command may be used with the corresponding cookie to cancel the wait
430 * time if it is known that it is no longer necessary.
431 * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
432 * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
433 * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
434 * the TX command and %NL80211_ATTR_FRAME includes the contents of the
435 * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged
437 * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
438 * backward compatibility.
439 * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
440 * is used to configure connection quality monitoring notification trigger
442 * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This
443 * command is used as an event to indicate the that a trigger level was
445 * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
446 * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed
447 * by %NL80211_ATTR_IFINDEX) shall operate on.
448 * In case multiple channels are supported by the device, the mechanism
449 * with which it switches channels is implementation-defined.
450 * When a monitor interface is given, it can only switch channel while
451 * no other interfaces are operating to avoid disturbing the operation
452 * of any other interfaces, and other interfaces will again take
453 * precedence when they are used.
455 * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
457 * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
458 * mesh config parameters may be given.
459 * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
460 * network is determined by the network interface.
462 * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
463 * notification. This event is used to indicate that an unprotected
464 * deauthentication frame was dropped when MFP is in use.
465 * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
466 * notification. This event is used to indicate that an unprotected
467 * disassociation frame was dropped when MFP is in use.
469 * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
470 * beacon or probe response from a compatible mesh peer. This is only
471 * sent while no station information (sta_info) exists for the new peer
472 * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On
473 * reception of this notification, userspace may decide to create a new
474 * station (@NL80211_CMD_NEW_STATION). To stop this notification from
475 * reoccurring, the userspace authentication daemon may want to create the
476 * new station with the AUTHENTICATED flag unset and maybe change it later
477 * depending on the authentication result.
479 * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings.
480 * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings.
481 * Since wireless is more complex than wired ethernet, it supports
482 * various triggers. These triggers can be configured through this
483 * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
484 * more background information, see
485 * http://wireless.kernel.org/en/users/Documentation/WoWLAN.
487 * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver
488 * the necessary information for supporting GTK rekey offload. This
489 * feature is typically used during WoWLAN. The configuration data
490 * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and
491 * contains the data in sub-attributes). After rekeying happened,
492 * this command may also be sent by the driver as an MLME event to
493 * inform userspace of the new replay counter.
495 * @NL80211_CMD_MAX: highest used command number
496 * @__NL80211_CMD_AFTER_LAST: internal use
498 enum nl80211_commands {
499 /* don't change the order or add anything between, this is ABI! */
502 NL80211_CMD_GET_WIPHY, /* can dump */
503 NL80211_CMD_SET_WIPHY,
504 NL80211_CMD_NEW_WIPHY,
505 NL80211_CMD_DEL_WIPHY,
507 NL80211_CMD_GET_INTERFACE, /* can dump */
508 NL80211_CMD_SET_INTERFACE,
509 NL80211_CMD_NEW_INTERFACE,
510 NL80211_CMD_DEL_INTERFACE,
517 NL80211_CMD_GET_BEACON,
518 NL80211_CMD_SET_BEACON,
519 NL80211_CMD_NEW_BEACON,
520 NL80211_CMD_DEL_BEACON,
522 NL80211_CMD_GET_STATION,
523 NL80211_CMD_SET_STATION,
524 NL80211_CMD_NEW_STATION,
525 NL80211_CMD_DEL_STATION,
527 NL80211_CMD_GET_MPATH,
528 NL80211_CMD_SET_MPATH,
529 NL80211_CMD_NEW_MPATH,
530 NL80211_CMD_DEL_MPATH,
535 NL80211_CMD_REQ_SET_REG,
537 NL80211_CMD_GET_MESH_CONFIG,
538 NL80211_CMD_SET_MESH_CONFIG,
540 NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
544 NL80211_CMD_GET_SCAN,
545 NL80211_CMD_TRIGGER_SCAN,
546 NL80211_CMD_NEW_SCAN_RESULTS,
547 NL80211_CMD_SCAN_ABORTED,
549 NL80211_CMD_REG_CHANGE,
551 NL80211_CMD_AUTHENTICATE,
552 NL80211_CMD_ASSOCIATE,
553 NL80211_CMD_DEAUTHENTICATE,
554 NL80211_CMD_DISASSOCIATE,
556 NL80211_CMD_MICHAEL_MIC_FAILURE,
558 NL80211_CMD_REG_BEACON_HINT,
560 NL80211_CMD_JOIN_IBSS,
561 NL80211_CMD_LEAVE_IBSS,
563 NL80211_CMD_TESTMODE,
567 NL80211_CMD_DISCONNECT,
569 NL80211_CMD_SET_WIPHY_NETNS,
571 NL80211_CMD_GET_SURVEY,
572 NL80211_CMD_NEW_SURVEY_RESULTS,
574 NL80211_CMD_SET_PMKSA,
575 NL80211_CMD_DEL_PMKSA,
576 NL80211_CMD_FLUSH_PMKSA,
578 NL80211_CMD_REMAIN_ON_CHANNEL,
579 NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
581 NL80211_CMD_SET_TX_BITRATE_MASK,
583 NL80211_CMD_REGISTER_FRAME,
584 NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME,
586 NL80211_CMD_ACTION = NL80211_CMD_FRAME,
587 NL80211_CMD_FRAME_TX_STATUS,
588 NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS,
590 NL80211_CMD_SET_POWER_SAVE,
591 NL80211_CMD_GET_POWER_SAVE,
594 NL80211_CMD_NOTIFY_CQM,
596 NL80211_CMD_SET_CHANNEL,
597 NL80211_CMD_SET_WDS_PEER,
599 NL80211_CMD_FRAME_WAIT_CANCEL,
601 NL80211_CMD_JOIN_MESH,
602 NL80211_CMD_LEAVE_MESH,
604 NL80211_CMD_UNPROT_DEAUTHENTICATE,
605 NL80211_CMD_UNPROT_DISASSOCIATE,
607 NL80211_CMD_NEW_PEER_CANDIDATE,
609 NL80211_CMD_GET_WOWLAN,
610 NL80211_CMD_SET_WOWLAN,
612 NL80211_CMD_START_SCHED_SCAN,
613 NL80211_CMD_STOP_SCHED_SCAN,
614 NL80211_CMD_SCHED_SCAN_RESULTS,
615 NL80211_CMD_SCHED_SCAN_STOPPED,
617 NL80211_CMD_SET_REKEY_OFFLOAD,
619 /* add new commands above here */
621 /* used to define NL80211_CMD_MAX below */
622 __NL80211_CMD_AFTER_LAST,
623 NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1
627 * Allow user space programs to use #ifdef on new commands by defining them
630 #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
631 #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
632 #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
633 #define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
634 #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
635 #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
636 #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
637 #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
639 /* source-level API compatibility */
640 #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
641 #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
642 #define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE
645 * enum nl80211_attrs - nl80211 netlink attributes
647 * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors
649 * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf.
650 * /sys/class/ieee80211/<phyname>/index
651 * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming)
652 * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters
653 * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz
654 * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
655 * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included):
656 * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including
658 * NL80211_CHAN_HT20 = HT20 only
659 * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel
660 * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel
661 * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is
662 * less than or equal to the RTS threshold; allowed range: 1..255;
663 * dot11ShortRetryLimit; u8
664 * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is
665 * greater than the RTS threshold; allowed range: 1..255;
666 * dot11ShortLongLimit; u8
667 * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum
668 * length in octets for frames; allowed range: 256..8000, disable
669 * fragmentation with (u32)-1; dot11FragmentationThreshold; u32
670 * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
671 * larger than or equal to this use RTS/CTS handshake); allowed range:
672 * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32
673 * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
674 * section 7.3.2.9; dot11CoverageClass; u8
676 * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
677 * @NL80211_ATTR_IFNAME: network interface name
678 * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype
680 * @NL80211_ATTR_MAC: MAC address (various uses)
682 * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of
683 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
685 * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3)
686 * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
687 * section 7.3.2.25.1, e.g. 0x000FAC04)
688 * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
689 * CCMP keys, each six bytes in little endian
691 * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
692 * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
693 * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE
694 * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE
696 * @NL80211_ATTR_STA_AID: Association ID for the station (u16)
697 * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of
698 * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2)
699 * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by
700 * IEEE 802.11 7.3.1.6 (u16).
701 * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported
702 * rates as defined by IEEE 802.11 7.3.2.2 but without the length
703 * restriction (at most %NL80211_MAX_SUPP_RATES).
704 * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station
705 * to, or the AP interface the station was originally added to to.
706 * @NL80211_ATTR_STA_INFO: information about a station, part of station info
707 * given for %NL80211_CMD_GET_STATION, nested attribute containing
708 * info as possible, see &enum nl80211_sta_info.
710 * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands,
711 * consisting of a nested array.
713 * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
714 * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
715 * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
716 * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
717 * info given for %NL80211_CMD_GET_MPATH, nested attribute described at
718 * &enum nl80211_mpath_info.
720 * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of
721 * &enum nl80211_mntr_flags.
723 * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the
724 * current regulatory domain should be set to or is already set to.
725 * For example, 'CR', for Costa Rica. This attribute is used by the kernel
726 * to query the CRDA to retrieve one regulatory domain. This attribute can
727 * also be used by userspace to query the kernel for the currently set
728 * regulatory domain. We chose an alpha2 as that is also used by the
729 * IEEE-802.11d country information element to identify a country.
730 * Users can also simply ask the wireless core to set regulatory domain
731 * to a specific alpha2.
732 * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory
735 * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1)
736 * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled
738 * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled
740 * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic
741 * rates in format defined by IEEE 802.11 7.3.2.2 but without the length
742 * restriction (at most %NL80211_MAX_SUPP_RATES).
744 * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
745 * association request when used with NL80211_CMD_NEW_STATION)
747 * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
748 * supported interface types, each a flag attribute with the number
749 * of the interface mode.
751 * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for
752 * %NL80211_CMD_SET_MGMT_EXTRA_IE.
754 * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with
755 * %NL80211_CMD_SET_MGMT_EXTRA_IE).
757 * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with
758 * a single scan request, a wiphy attribute.
759 * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements
760 * that can be added to a scan request
762 * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
763 * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
764 * scanning and include a zero-length SSID (wildcard) for wildcard scan
765 * @NL80211_ATTR_BSS: scan result BSS
767 * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain
768 * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_*
769 * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
770 * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
772 * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
773 * an array of command numbers (i.e. a mapping index to command number)
774 * that the driver for the given wiphy supports.
776 * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
777 * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
778 * NL80211_CMD_ASSOCIATE events
779 * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
780 * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
781 * represented as a u32
782 * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
783 * %NL80211_CMD_DISASSOCIATE, u16
785 * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as
788 * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change
789 * due to considerations from a beacon hint. This attribute reflects
790 * the state of the channel _before_ the beacon hint processing. This
791 * attributes consists of a nested attribute containing
792 * NL80211_FREQUENCY_ATTR_*
793 * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change
794 * due to considerations from a beacon hint. This attribute reflects
795 * the state of the channel _after_ the beacon hint processing. This
796 * attributes consists of a nested attribute containing
797 * NL80211_FREQUENCY_ATTR_*
799 * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported
802 * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look
803 * for other networks on different channels
805 * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this
806 * is used, e.g., with %NL80211_CMD_AUTHENTICATE event
808 * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
809 * used for the association (&enum nl80211_mfp, represented as a u32);
810 * this attribute can be used
811 * with %NL80211_CMD_ASSOCIATE request
813 * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
814 * &struct nl80211_sta_flag_update.
816 * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls
817 * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in
818 * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE
819 * request, the driver will assume that the port is unauthorized until
820 * authorized by user space. Otherwise, port is marked authorized by
821 * default in station mode.
822 * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
823 * ethertype that will be used for key negotiation. It can be
824 * specified with the associate and connect commands. If it is not
825 * specified, the value defaults to 0x888E (PAE, 802.1X). This
826 * attribute is also used as a flag in the wiphy information to
827 * indicate that protocols other than PAE are supported.
828 * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
829 * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
830 * ethertype frames used for key negotiation must not be encrypted.
832 * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
833 * We recommend using nested, driver-specific attributes within this.
835 * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT
836 * event was due to the AP disconnecting the station, and not due to
837 * a local disconnect request.
838 * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT
840 * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating
841 * that protected APs should be used.
843 * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to
844 * indicate which unicast key ciphers will be used with the connection
846 * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate
847 * which group key cipher will be used with the connection (a u32).
848 * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate
849 * which WPA version(s) the AP we want to associate with is using
850 * (a u32 with flags from &enum nl80211_wpa_versions).
851 * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate
852 * which key management algorithm(s) to use (an array of u32).
854 * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
855 * sent out by the card, for ROAM and successful CONNECT events.
856 * @NL80211_ATTR_RESP_IE: (Re)association response information elements as
857 * sent by peer, for ROAM and successful CONNECT events.
859 * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE
860 * commands to specify using a reassociate frame
862 * @NL80211_ATTR_KEY: key information in a nested attribute with
863 * %NL80211_KEY_* sub-attributes
864 * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect()
865 * and join_ibss(), key information is in a nested attribute each
866 * with %NL80211_KEY_* sub-attributes
868 * @NL80211_ATTR_PID: Process ID of a network namespace.
870 * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for
871 * dumps. This number increases whenever the object list being
872 * dumped changes, and as such userspace can verify that it has
873 * obtained a complete and consistent snapshot by verifying that
874 * all dump messages contain the same generation number. If it
875 * changed then the list changed and the dump should be repeated
876 * completely from scratch.
878 * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
880 * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
881 * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
882 * containing info as possible, see &enum survey_info.
884 * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
885 * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
886 * cache, a wiphy attribute.
888 * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
889 * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
890 * specifies the maximum duration that can be requested with the
891 * remain-on-channel operation, in milliseconds, u32.
893 * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
895 * @NL80211_ATTR_TX_RATES: Nested set of attributes
896 * (enum nl80211_tx_rate_attributes) describing TX rates per band. The
897 * enum nl80211_band value is used as the index (nla_type() of the nested
898 * data. If a band is not included, it will be configured to allow all
899 * rates based on negotiated supported rates information. This attribute
900 * is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
902 * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
903 * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
904 * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the
905 * @NL80211_CMD_REGISTER_FRAME command.
906 * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a
907 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
908 * information about which frame types can be transmitted with
909 * %NL80211_CMD_FRAME.
910 * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a
911 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing
912 * information about which frame types can be registered for RX.
914 * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
915 * acknowledged by the recipient.
917 * @NL80211_ATTR_CQM: connection quality monitor configuration in a
918 * nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
920 * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command
921 * is requesting a local authentication/association state change without
922 * invoking actual management frame exchange. This can be used with
923 * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE,
924 * NL80211_CMD_DISASSOCIATE.
926 * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations
927 * connected to this BSS.
929 * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See
930 * &enum nl80211_tx_power_setting for possible values.
931 * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units.
932 * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
933 * for non-automatic settings.
935 * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
936 * means support for per-station GTKs.
938 * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
939 * This can be used to mask out antennas which are not attached or should
940 * not be used for transmitting. If an antenna is not selected in this
941 * bitmap the hardware is not allowed to transmit on this antenna.
943 * Each bit represents one antenna, starting with antenna 1 at the first
944 * bit. Depending on which antennas are selected in the bitmap, 802.11n
945 * drivers can derive which chainmasks to use (if all antennas belonging to
946 * a particular chain are disabled this chain should be disabled) and if
947 * a chain has diversity antennas wether diversity should be used or not.
948 * HT capabilities (STBC, TX Beamforming, Antenna selection) can be
949 * derived from the available chains after applying the antenna mask.
950 * Non-802.11n drivers can derive wether to use diversity or not.
951 * Drivers may reject configurations or RX/TX mask combinations they cannot
952 * support by returning -EINVAL.
954 * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
955 * This can be used to mask out antennas which are not attached or should
956 * not be used for receiving. If an antenna is not selected in this bitmap
957 * the hardware should not be configured to receive on this antenna.
958 * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX.
960 * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
961 * for configuration as TX antennas via the above parameters.
963 * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
964 * for configuration as RX antennas via the above parameters.
966 * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
968 * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
969 * transmitted on another channel when the channel given doesn't match
970 * the current channel. If the current channel doesn't match and this
971 * flag isn't set, the frame will be rejected. This is also used as an
972 * nl80211 capability flag.
974 * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16)
976 * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
977 * attributes, specifying what a key should be set as default as.
978 * See &enum nl80211_key_default_types.
980 * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be
981 * changed once the mesh is active.
982 * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute
983 * containing attributes from &enum nl80211_meshconf_params.
984 * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
985 * allows auth frames in a mesh to be passed to userspace for processing via
986 * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
987 * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
988 * defined in &enum nl80211_plink_state. Used when userspace is
989 * driving the peer link management state machine.
990 * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
992 * @NL80211_ATTR_WOWLAN_SUPPORTED: indicates, as part of the wiphy capabilities,
993 * the supported WoWLAN triggers
994 * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to
995 * indicate which WoW triggers should be enabled. This is also
996 * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
999 * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
1002 * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
1003 * interface combinations. In each nested item, it contains attributes
1004 * defined in &enum nl80211_if_combination_attrs.
1005 * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like
1006 * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that
1007 * are managed in software: interfaces of these types aren't subject to
1008 * any restrictions in their number or combinations.
1010 * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information
1011 * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
1013 * @NL80211_ATTR_MAX: highest attribute number currently defined
1014 * @__NL80211_ATTR_AFTER_LAST: internal use
1016 enum nl80211_attrs {
1017 /* don't change the order or add anything between, this is ABI! */
1018 NL80211_ATTR_UNSPEC,
1021 NL80211_ATTR_WIPHY_NAME,
1023 NL80211_ATTR_IFINDEX,
1024 NL80211_ATTR_IFNAME,
1025 NL80211_ATTR_IFTYPE,
1029 NL80211_ATTR_KEY_DATA,
1030 NL80211_ATTR_KEY_IDX,
1031 NL80211_ATTR_KEY_CIPHER,
1032 NL80211_ATTR_KEY_SEQ,
1033 NL80211_ATTR_KEY_DEFAULT,
1035 NL80211_ATTR_BEACON_INTERVAL,
1036 NL80211_ATTR_DTIM_PERIOD,
1037 NL80211_ATTR_BEACON_HEAD,
1038 NL80211_ATTR_BEACON_TAIL,
1040 NL80211_ATTR_STA_AID,
1041 NL80211_ATTR_STA_FLAGS,
1042 NL80211_ATTR_STA_LISTEN_INTERVAL,
1043 NL80211_ATTR_STA_SUPPORTED_RATES,
1044 NL80211_ATTR_STA_VLAN,
1045 NL80211_ATTR_STA_INFO,
1047 NL80211_ATTR_WIPHY_BANDS,
1049 NL80211_ATTR_MNTR_FLAGS,
1051 NL80211_ATTR_MESH_ID,
1052 NL80211_ATTR_STA_PLINK_ACTION,
1053 NL80211_ATTR_MPATH_NEXT_HOP,
1054 NL80211_ATTR_MPATH_INFO,
1056 NL80211_ATTR_BSS_CTS_PROT,
1057 NL80211_ATTR_BSS_SHORT_PREAMBLE,
1058 NL80211_ATTR_BSS_SHORT_SLOT_TIME,
1060 NL80211_ATTR_HT_CAPABILITY,
1062 NL80211_ATTR_SUPPORTED_IFTYPES,
1064 NL80211_ATTR_REG_ALPHA2,
1065 NL80211_ATTR_REG_RULES,
1067 NL80211_ATTR_MESH_CONFIG,
1069 NL80211_ATTR_BSS_BASIC_RATES,
1071 NL80211_ATTR_WIPHY_TXQ_PARAMS,
1072 NL80211_ATTR_WIPHY_FREQ,
1073 NL80211_ATTR_WIPHY_CHANNEL_TYPE,
1075 NL80211_ATTR_KEY_DEFAULT_MGMT,
1077 NL80211_ATTR_MGMT_SUBTYPE,
1080 NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
1082 NL80211_ATTR_SCAN_FREQUENCIES,
1083 NL80211_ATTR_SCAN_SSIDS,
1084 NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */
1087 NL80211_ATTR_REG_INITIATOR,
1088 NL80211_ATTR_REG_TYPE,
1090 NL80211_ATTR_SUPPORTED_COMMANDS,
1094 NL80211_ATTR_AUTH_TYPE,
1095 NL80211_ATTR_REASON_CODE,
1097 NL80211_ATTR_KEY_TYPE,
1099 NL80211_ATTR_MAX_SCAN_IE_LEN,
1100 NL80211_ATTR_CIPHER_SUITES,
1102 NL80211_ATTR_FREQ_BEFORE,
1103 NL80211_ATTR_FREQ_AFTER,
1105 NL80211_ATTR_FREQ_FIXED,
1108 NL80211_ATTR_WIPHY_RETRY_SHORT,
1109 NL80211_ATTR_WIPHY_RETRY_LONG,
1110 NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
1111 NL80211_ATTR_WIPHY_RTS_THRESHOLD,
1113 NL80211_ATTR_TIMED_OUT,
1115 NL80211_ATTR_USE_MFP,
1117 NL80211_ATTR_STA_FLAGS2,
1119 NL80211_ATTR_CONTROL_PORT,
1121 NL80211_ATTR_TESTDATA,
1123 NL80211_ATTR_PRIVACY,
1125 NL80211_ATTR_DISCONNECTED_BY_AP,
1126 NL80211_ATTR_STATUS_CODE,
1128 NL80211_ATTR_CIPHER_SUITES_PAIRWISE,
1129 NL80211_ATTR_CIPHER_SUITE_GROUP,
1130 NL80211_ATTR_WPA_VERSIONS,
1131 NL80211_ATTR_AKM_SUITES,
1133 NL80211_ATTR_REQ_IE,
1134 NL80211_ATTR_RESP_IE,
1136 NL80211_ATTR_PREV_BSSID,
1145 NL80211_ATTR_SURVEY_INFO,
1148 NL80211_ATTR_MAX_NUM_PMKIDS,
1150 NL80211_ATTR_DURATION,
1152 NL80211_ATTR_COOKIE,
1154 NL80211_ATTR_WIPHY_COVERAGE_CLASS,
1156 NL80211_ATTR_TX_RATES,
1158 NL80211_ATTR_FRAME_MATCH,
1162 NL80211_ATTR_PS_STATE,
1166 NL80211_ATTR_LOCAL_STATE_CHANGE,
1168 NL80211_ATTR_AP_ISOLATE,
1170 NL80211_ATTR_WIPHY_TX_POWER_SETTING,
1171 NL80211_ATTR_WIPHY_TX_POWER_LEVEL,
1173 NL80211_ATTR_TX_FRAME_TYPES,
1174 NL80211_ATTR_RX_FRAME_TYPES,
1175 NL80211_ATTR_FRAME_TYPE,
1177 NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
1178 NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
1180 NL80211_ATTR_SUPPORT_IBSS_RSN,
1182 NL80211_ATTR_WIPHY_ANTENNA_TX,
1183 NL80211_ATTR_WIPHY_ANTENNA_RX,
1185 NL80211_ATTR_MCAST_RATE,
1187 NL80211_ATTR_OFFCHANNEL_TX_OK,
1189 NL80211_ATTR_BSS_HT_OPMODE,
1191 NL80211_ATTR_KEY_DEFAULT_TYPES,
1193 NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
1195 NL80211_ATTR_MESH_SETUP,
1197 NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
1198 NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
1200 NL80211_ATTR_SUPPORT_MESH_AUTH,
1201 NL80211_ATTR_STA_PLINK_STATE,
1203 NL80211_ATTR_WOWLAN_TRIGGERS,
1204 NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED,
1206 NL80211_ATTR_SCHED_SCAN_INTERVAL,
1208 NL80211_ATTR_INTERFACE_COMBINATIONS,
1209 NL80211_ATTR_SOFTWARE_IFTYPES,
1211 NL80211_ATTR_REKEY_DATA,
1213 /* add attributes here, update the policy in nl80211.c */
1215 __NL80211_ATTR_AFTER_LAST,
1216 NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
1219 /* source-level API compatibility */
1220 #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
1221 #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
1224 * Allow user space programs to use #ifdef on new attributes by defining them
1227 #define NL80211_CMD_CONNECT NL80211_CMD_CONNECT
1228 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY
1229 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES
1230 #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS
1231 #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ
1232 #define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE
1233 #define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE
1234 #define NL80211_ATTR_IE NL80211_ATTR_IE
1235 #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
1236 #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
1237 #define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
1238 #define NL80211_ATTR_SSID NL80211_ATTR_SSID
1239 #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
1240 #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
1241 #define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE
1242 #define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP
1243 #define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS
1244 #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES
1245 #define NL80211_ATTR_KEY NL80211_ATTR_KEY
1246 #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS
1248 #define NL80211_MAX_SUPP_RATES 32
1249 #define NL80211_MAX_SUPP_REG_RULES 32
1250 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
1251 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
1252 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
1253 #define NL80211_HT_CAPABILITY_LEN 26
1255 #define NL80211_MAX_NR_CIPHER_SUITES 5
1256 #define NL80211_MAX_NR_AKM_SUITES 2
1259 * enum nl80211_iftype - (virtual) interface types
1261 * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides
1262 * @NL80211_IFTYPE_ADHOC: independent BSS member
1263 * @NL80211_IFTYPE_STATION: managed BSS member
1264 * @NL80211_IFTYPE_AP: access point
1265 * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces
1266 * are a bit special in that they must always be tied to a pre-existing
1267 * AP type interface.
1268 * @NL80211_IFTYPE_WDS: wireless distribution interface
1269 * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
1270 * @NL80211_IFTYPE_MESH_POINT: mesh point
1271 * @NL80211_IFTYPE_P2P_CLIENT: P2P client
1272 * @NL80211_IFTYPE_P2P_GO: P2P group owner
1273 * @NL80211_IFTYPE_MAX: highest interface type number currently defined
1274 * @NUM_NL80211_IFTYPES: number of defined interface types
1276 * These values are used with the %NL80211_ATTR_IFTYPE
1277 * to set the type of an interface.
1280 enum nl80211_iftype {
1281 NL80211_IFTYPE_UNSPECIFIED,
1282 NL80211_IFTYPE_ADHOC,
1283 NL80211_IFTYPE_STATION,
1285 NL80211_IFTYPE_AP_VLAN,
1287 NL80211_IFTYPE_MONITOR,
1288 NL80211_IFTYPE_MESH_POINT,
1289 NL80211_IFTYPE_P2P_CLIENT,
1290 NL80211_IFTYPE_P2P_GO,
1293 NUM_NL80211_IFTYPES,
1294 NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1
1298 * enum nl80211_sta_flags - station flags
1300 * Station flags. When a station is added to an AP interface, it is
1301 * assumed to be already associated (and hence authenticated.)
1303 * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved
1304 * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X)
1305 * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames
1306 * with short barker preamble
1307 * @NL80211_STA_FLAG_WME: station is WME/QoS capable
1308 * @NL80211_STA_FLAG_MFP: station uses management frame protection
1309 * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
1310 * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
1311 * @__NL80211_STA_FLAG_AFTER_LAST: internal use
1313 enum nl80211_sta_flags {
1314 __NL80211_STA_FLAG_INVALID,
1315 NL80211_STA_FLAG_AUTHORIZED,
1316 NL80211_STA_FLAG_SHORT_PREAMBLE,
1317 NL80211_STA_FLAG_WME,
1318 NL80211_STA_FLAG_MFP,
1319 NL80211_STA_FLAG_AUTHENTICATED,
1322 __NL80211_STA_FLAG_AFTER_LAST,
1323 NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1
1327 * struct nl80211_sta_flag_update - station flags mask/set
1328 * @mask: mask of station flags to set
1329 * @set: which values to set them to
1331 * Both mask and set contain bits as per &enum nl80211_sta_flags.
1333 struct nl80211_sta_flag_update {
1336 } __attribute__((packed));
1339 * enum nl80211_rate_info - bitrate information
1341 * These attribute types are used with %NL80211_STA_INFO_TXRATE
1342 * when getting information about the bitrate of a station.
1344 * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved
1345 * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s)
1346 * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8)
1347 * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate
1348 * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval
1349 * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined
1350 * @__NL80211_RATE_INFO_AFTER_LAST: internal use
1352 enum nl80211_rate_info {
1353 __NL80211_RATE_INFO_INVALID,
1354 NL80211_RATE_INFO_BITRATE,
1355 NL80211_RATE_INFO_MCS,
1356 NL80211_RATE_INFO_40_MHZ_WIDTH,
1357 NL80211_RATE_INFO_SHORT_GI,
1360 __NL80211_RATE_INFO_AFTER_LAST,
1361 NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1
1365 * enum nl80211_sta_bss_param - BSS information collected by STA
1367 * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM
1368 * when getting information about the bitrate of a station.
1370 * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved
1371 * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag)
1372 * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled
1374 * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled
1376 * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8)
1377 * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16)
1378 * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined
1379 * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use
1381 enum nl80211_sta_bss_param {
1382 __NL80211_STA_BSS_PARAM_INVALID,
1383 NL80211_STA_BSS_PARAM_CTS_PROT,
1384 NL80211_STA_BSS_PARAM_SHORT_PREAMBLE,
1385 NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME,
1386 NL80211_STA_BSS_PARAM_DTIM_PERIOD,
1387 NL80211_STA_BSS_PARAM_BEACON_INTERVAL,
1390 __NL80211_STA_BSS_PARAM_AFTER_LAST,
1391 NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1
1395 * enum nl80211_sta_info - station information
1397 * These attribute types are used with %NL80211_ATTR_STA_INFO
1398 * when getting information about a station.
1400 * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
1401 * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
1402 * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
1403 * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
1404 * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
1405 * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
1406 * containing info as possible, see &enum nl80211_rate_info
1407 * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
1408 * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
1410 * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
1411 * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
1412 * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
1413 * @NL80211_STA_INFO_LLID: the station's mesh LLID
1414 * @NL80211_STA_INFO_PLID: the station's mesh PLID
1415 * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station
1416 * (see %enum nl80211_plink_state)
1417 * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested
1418 * attribute, like NL80211_STA_INFO_TX_BITRATE.
1419 * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute
1420 * containing info as possible, see &enum nl80211_sta_bss_param
1421 * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
1422 * @__NL80211_STA_INFO_AFTER_LAST: internal
1423 * @NL80211_STA_INFO_MAX: highest possible station info attribute
1425 enum nl80211_sta_info {
1426 __NL80211_STA_INFO_INVALID,
1427 NL80211_STA_INFO_INACTIVE_TIME,
1428 NL80211_STA_INFO_RX_BYTES,
1429 NL80211_STA_INFO_TX_BYTES,
1430 NL80211_STA_INFO_LLID,
1431 NL80211_STA_INFO_PLID,
1432 NL80211_STA_INFO_PLINK_STATE,
1433 NL80211_STA_INFO_SIGNAL,
1434 NL80211_STA_INFO_TX_BITRATE,
1435 NL80211_STA_INFO_RX_PACKETS,
1436 NL80211_STA_INFO_TX_PACKETS,
1437 NL80211_STA_INFO_TX_RETRIES,
1438 NL80211_STA_INFO_TX_FAILED,
1439 NL80211_STA_INFO_SIGNAL_AVG,
1440 NL80211_STA_INFO_RX_BITRATE,
1441 NL80211_STA_INFO_BSS_PARAM,
1442 NL80211_STA_INFO_CONNECTED_TIME,
1445 __NL80211_STA_INFO_AFTER_LAST,
1446 NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1
1450 * enum nl80211_mpath_flags - nl80211 mesh path flags
1452 * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
1453 * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
1454 * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
1455 * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
1456 * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
1458 enum nl80211_mpath_flags {
1459 NL80211_MPATH_FLAG_ACTIVE = 1<<0,
1460 NL80211_MPATH_FLAG_RESOLVING = 1<<1,
1461 NL80211_MPATH_FLAG_SN_VALID = 1<<2,
1462 NL80211_MPATH_FLAG_FIXED = 1<<3,
1463 NL80211_MPATH_FLAG_RESOLVED = 1<<4,
1467 * enum nl80211_mpath_info - mesh path information
1469 * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting
1470 * information about a mesh path.
1472 * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
1473 * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination
1474 * @NL80211_MPATH_INFO_SN: destination sequence number
1475 * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path
1476 * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now
1477 * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in
1478 * &enum nl80211_mpath_flags;
1479 * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
1480 * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
1481 * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
1483 * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
1485 enum nl80211_mpath_info {
1486 __NL80211_MPATH_INFO_INVALID,
1487 NL80211_MPATH_INFO_FRAME_QLEN,
1488 NL80211_MPATH_INFO_SN,
1489 NL80211_MPATH_INFO_METRIC,
1490 NL80211_MPATH_INFO_EXPTIME,
1491 NL80211_MPATH_INFO_FLAGS,
1492 NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
1493 NL80211_MPATH_INFO_DISCOVERY_RETRIES,
1496 __NL80211_MPATH_INFO_AFTER_LAST,
1497 NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1
1501 * enum nl80211_band_attr - band attributes
1502 * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
1503 * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
1504 * an array of nested frequency attributes
1505 * @NL80211_BAND_ATTR_RATES: supported bitrates in this band,
1506 * an array of nested bitrate attributes
1507 * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as
1508 * defined in 802.11n
1509 * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE
1510 * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n
1511 * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n
1512 * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
1513 * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
1515 enum nl80211_band_attr {
1516 __NL80211_BAND_ATTR_INVALID,
1517 NL80211_BAND_ATTR_FREQS,
1518 NL80211_BAND_ATTR_RATES,
1520 NL80211_BAND_ATTR_HT_MCS_SET,
1521 NL80211_BAND_ATTR_HT_CAPA,
1522 NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
1523 NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
1526 __NL80211_BAND_ATTR_AFTER_LAST,
1527 NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
1530 #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
1533 * enum nl80211_frequency_attr - frequency attributes
1534 * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved
1535 * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz
1536 * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current
1537 * regulatory domain.
1538 * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is
1539 * permitted on this channel in current regulatory domain.
1540 * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted
1541 * on this channel in current regulatory domain.
1542 * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory
1543 * on this channel in current regulatory domain.
1544 * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm
1546 * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
1548 * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
1550 enum nl80211_frequency_attr {
1551 __NL80211_FREQUENCY_ATTR_INVALID,
1552 NL80211_FREQUENCY_ATTR_FREQ,
1553 NL80211_FREQUENCY_ATTR_DISABLED,
1554 NL80211_FREQUENCY_ATTR_PASSIVE_SCAN,
1555 NL80211_FREQUENCY_ATTR_NO_IBSS,
1556 NL80211_FREQUENCY_ATTR_RADAR,
1557 NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
1560 __NL80211_FREQUENCY_ATTR_AFTER_LAST,
1561 NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1
1564 #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER
1567 * enum nl80211_bitrate_attr - bitrate attributes
1568 * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved
1569 * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps
1570 * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported
1572 * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number
1574 * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use
1576 enum nl80211_bitrate_attr {
1577 __NL80211_BITRATE_ATTR_INVALID,
1578 NL80211_BITRATE_ATTR_RATE,
1579 NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE,
1582 __NL80211_BITRATE_ATTR_AFTER_LAST,
1583 NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1
1587 * enum nl80211_initiator - Indicates the initiator of a reg domain request
1588 * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world
1589 * regulatory domain.
1590 * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the
1591 * regulatory domain.
1592 * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the
1593 * wireless core it thinks its knows the regulatory domain we should be in.
1594 * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
1595 * 802.11 country information element with regulatory information it
1596 * thinks we should consider. cfg80211 only processes the country
1597 * code from the IE, and relies on the regulatory domain information
1598 * structure passed by userspace (CRDA) from our wireless-regdb.
1599 * If a channel is enabled but the country code indicates it should
1600 * be disabled we disable the channel and re-enable it upon disassociation.
1602 enum nl80211_reg_initiator {
1603 NL80211_REGDOM_SET_BY_CORE,
1604 NL80211_REGDOM_SET_BY_USER,
1605 NL80211_REGDOM_SET_BY_DRIVER,
1606 NL80211_REGDOM_SET_BY_COUNTRY_IE,
1610 * enum nl80211_reg_type - specifies the type of regulatory domain
1611 * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains
1612 * to a specific country. When this is set you can count on the
1613 * ISO / IEC 3166 alpha2 country code being valid.
1614 * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory
1616 * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom
1617 * driver specific world regulatory domain. These do not apply system-wide
1618 * and are only applicable to the individual devices which have requested
1619 * them to be applied.
1620 * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product
1621 * of an intersection between two regulatory domains -- the previously
1622 * set regulatory domain on the system and the last accepted regulatory
1623 * domain request to be processed.
1625 enum nl80211_reg_type {
1626 NL80211_REGDOM_TYPE_COUNTRY,
1627 NL80211_REGDOM_TYPE_WORLD,
1628 NL80211_REGDOM_TYPE_CUSTOM_WORLD,
1629 NL80211_REGDOM_TYPE_INTERSECTION,
1633 * enum nl80211_reg_rule_attr - regulatory rule attributes
1634 * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved
1635 * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional
1636 * considerations for a given frequency range. These are the
1637 * &enum nl80211_reg_rule_flags.
1638 * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory
1639 * rule in KHz. This is not a center of frequency but an actual regulatory
1641 * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule
1642 * in KHz. This is not a center a frequency but an actual regulatory
1644 * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this
1645 * frequency range, in KHz.
1646 * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain
1647 * for a given frequency range. The value is in mBi (100 * dBi).
1648 * If you don't have one then don't send this.
1649 * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for
1650 * a given frequency range. The value is in mBm (100 * dBm).
1651 * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
1653 * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use
1655 enum nl80211_reg_rule_attr {
1656 __NL80211_REG_RULE_ATTR_INVALID,
1657 NL80211_ATTR_REG_RULE_FLAGS,
1659 NL80211_ATTR_FREQ_RANGE_START,
1660 NL80211_ATTR_FREQ_RANGE_END,
1661 NL80211_ATTR_FREQ_RANGE_MAX_BW,
1663 NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
1664 NL80211_ATTR_POWER_RULE_MAX_EIRP,
1667 __NL80211_REG_RULE_ATTR_AFTER_LAST,
1668 NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1
1672 * enum nl80211_reg_rule_flags - regulatory rule flags
1674 * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
1675 * @NL80211_RRF_NO_CCK: CCK modulation not allowed
1676 * @NL80211_RRF_NO_INDOOR: indoor operation not allowed
1677 * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed
1678 * @NL80211_RRF_DFS: DFS support is required to be used
1679 * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links
1680 * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links
1681 * @NL80211_RRF_PASSIVE_SCAN: passive scan is required
1682 * @NL80211_RRF_NO_IBSS: no IBSS is allowed
1684 enum nl80211_reg_rule_flags {
1685 NL80211_RRF_NO_OFDM = 1<<0,
1686 NL80211_RRF_NO_CCK = 1<<1,
1687 NL80211_RRF_NO_INDOOR = 1<<2,
1688 NL80211_RRF_NO_OUTDOOR = 1<<3,
1689 NL80211_RRF_DFS = 1<<4,
1690 NL80211_RRF_PTP_ONLY = 1<<5,
1691 NL80211_RRF_PTMP_ONLY = 1<<6,
1692 NL80211_RRF_PASSIVE_SCAN = 1<<7,
1693 NL80211_RRF_NO_IBSS = 1<<8,
1697 * enum nl80211_survey_info - survey information
1699 * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
1700 * when getting information about a survey.
1702 * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
1703 * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
1704 * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
1705 * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
1706 * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
1707 * spent on this channel
1708 * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
1709 * channel was sensed busy (either due to activity or energy detect)
1710 * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
1711 * channel was sensed busy
1712 * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
1714 * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
1716 * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
1718 * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
1720 enum nl80211_survey_info {
1721 __NL80211_SURVEY_INFO_INVALID,
1722 NL80211_SURVEY_INFO_FREQUENCY,
1723 NL80211_SURVEY_INFO_NOISE,
1724 NL80211_SURVEY_INFO_IN_USE,
1725 NL80211_SURVEY_INFO_CHANNEL_TIME,
1726 NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
1727 NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
1728 NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
1729 NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
1732 __NL80211_SURVEY_INFO_AFTER_LAST,
1733 NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
1737 * enum nl80211_mntr_flags - monitor configuration flags
1739 * Monitor configuration flags.
1741 * @__NL80211_MNTR_FLAG_INVALID: reserved
1743 * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS
1744 * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP
1745 * @NL80211_MNTR_FLAG_CONTROL: pass control frames
1746 * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering
1747 * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing.
1748 * overrides all other flags.
1750 * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use
1751 * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag
1753 enum nl80211_mntr_flags {
1754 __NL80211_MNTR_FLAG_INVALID,
1755 NL80211_MNTR_FLAG_FCSFAIL,
1756 NL80211_MNTR_FLAG_PLCPFAIL,
1757 NL80211_MNTR_FLAG_CONTROL,
1758 NL80211_MNTR_FLAG_OTHER_BSS,
1759 NL80211_MNTR_FLAG_COOK_FRAMES,
1762 __NL80211_MNTR_FLAG_AFTER_LAST,
1763 NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1
1767 * enum nl80211_meshconf_params - mesh configuration parameters
1769 * Mesh configuration parameters. These can be changed while the mesh is
1772 * @__NL80211_MESHCONF_INVALID: internal use
1774 * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in
1775 * millisecond units, used by the Peer Link Open message
1777 * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in
1778 * millisecond units, used by the peer link management to close a peer link
1780 * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in
1783 * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed
1784 * on this mesh interface
1786 * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link
1787 * open retries that can be sent to establish a new peer link instance in a
1790 * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
1793 * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
1794 * open peer links when we detect compatible mesh peers.
1796 * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
1797 * containing a PREQ that an MP can send to a particular destination (path
1800 * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths
1803 * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait
1804 * until giving up on a path discovery (in milliseconds)
1806 * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh
1807 * points receiving a PREQ shall consider the forwarding information from the
1808 * root to be valid. (TU = time unit)
1810 * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in
1811 * TUs) during which an MP can send only one action frame containing a PREQ
1814 * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
1815 * that it takes for an HWMP information element to propagate across the mesh
1817 * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not
1819 * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
1820 * source mesh point for path selection elements.
1822 * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
1824 * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
1826 enum nl80211_meshconf_params {
1827 __NL80211_MESHCONF_INVALID,
1828 NL80211_MESHCONF_RETRY_TIMEOUT,
1829 NL80211_MESHCONF_CONFIRM_TIMEOUT,
1830 NL80211_MESHCONF_HOLDING_TIMEOUT,
1831 NL80211_MESHCONF_MAX_PEER_LINKS,
1832 NL80211_MESHCONF_MAX_RETRIES,
1833 NL80211_MESHCONF_TTL,
1834 NL80211_MESHCONF_AUTO_OPEN_PLINKS,
1835 NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
1836 NL80211_MESHCONF_PATH_REFRESH_TIME,
1837 NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
1838 NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
1839 NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
1840 NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
1841 NL80211_MESHCONF_HWMP_ROOTMODE,
1842 NL80211_MESHCONF_ELEMENT_TTL,
1845 __NL80211_MESHCONF_ATTR_AFTER_LAST,
1846 NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1
1850 * enum nl80211_mesh_setup_params - mesh setup parameters
1852 * Mesh setup parameters. These are used to start/join a mesh and cannot be
1853 * changed while the mesh is active.
1855 * @__NL80211_MESH_SETUP_INVALID: Internal use
1857 * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
1858 * vendor specific path selection algorithm or disable it to use the default
1861 * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
1862 * vendor specific path metric or disable it to use the default Airtime
1865 * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a
1866 * robust security network ie, or a vendor specific information element that
1867 * vendors will use to identify the path selection methods and metrics in use.
1869 * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication
1870 * daemon will be authenticating mesh candidates.
1872 * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication
1873 * daemon will be securing peer link frames. AMPE is a secured version of Mesh
1874 * Peering Management (MPM) and is implemented with the assistance of a
1875 * userspace daemon. When this flag is set, the kernel will send peer
1876 * management frames to a userspace daemon that will implement AMPE
1877 * functionality (security capabilities selection, key confirmation, and key
1878 * management). When the flag is unset (default), the kernel can autonomously
1879 * complete (unsecured) mesh peering without the need of a userspace daemon.
1881 * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
1882 * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
1884 enum nl80211_mesh_setup_params {
1885 __NL80211_MESH_SETUP_INVALID,
1886 NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
1887 NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
1888 NL80211_MESH_SETUP_IE,
1889 NL80211_MESH_SETUP_USERSPACE_AUTH,
1890 NL80211_MESH_SETUP_USERSPACE_AMPE,
1893 __NL80211_MESH_SETUP_ATTR_AFTER_LAST,
1894 NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1
1898 * enum nl80211_txq_attr - TX queue parameter attributes
1899 * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
1900 * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
1901 * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
1903 * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
1904 * 2^n-1 in the range 1..32767]
1905 * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form
1906 * 2^n-1 in the range 1..32767]
1907 * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255]
1908 * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal
1909 * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number
1911 enum nl80211_txq_attr {
1912 __NL80211_TXQ_ATTR_INVALID,
1913 NL80211_TXQ_ATTR_QUEUE,
1914 NL80211_TXQ_ATTR_TXOP,
1915 NL80211_TXQ_ATTR_CWMIN,
1916 NL80211_TXQ_ATTR_CWMAX,
1917 NL80211_TXQ_ATTR_AIFS,
1920 __NL80211_TXQ_ATTR_AFTER_LAST,
1921 NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
1924 enum nl80211_txq_q {
1931 enum nl80211_channel_type {
1934 NL80211_CHAN_HT40MINUS,
1935 NL80211_CHAN_HT40PLUS
1939 * enum nl80211_bss - netlink attributes for a BSS
1941 * @__NL80211_BSS_INVALID: invalid
1942 * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets)
1943 * @NL80211_BSS_FREQUENCY: frequency in MHz (u32)
1944 * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64)
1945 * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
1946 * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
1947 * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
1948 * raw information elements from the probe response/beacon (bin);
1949 * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are
1950 * from a Probe Response frame; otherwise they are from a Beacon frame.
1951 * However, if the driver does not indicate the source of the IEs, these
1952 * IEs may be from either frame subtype.
1953 * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
1954 * in mBm (100 * dBm) (s32)
1955 * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
1956 * in unspecified units, scaled to 0..100 (u8)
1957 * @NL80211_BSS_STATUS: status, if this BSS is "used"
1958 * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
1959 * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
1960 * elements from a Beacon frame (bin); not present if no Beacon frame has
1962 * @__NL80211_BSS_AFTER_LAST: internal
1963 * @NL80211_BSS_MAX: highest BSS attribute
1966 __NL80211_BSS_INVALID,
1968 NL80211_BSS_FREQUENCY,
1970 NL80211_BSS_BEACON_INTERVAL,
1971 NL80211_BSS_CAPABILITY,
1972 NL80211_BSS_INFORMATION_ELEMENTS,
1973 NL80211_BSS_SIGNAL_MBM,
1974 NL80211_BSS_SIGNAL_UNSPEC,
1976 NL80211_BSS_SEEN_MS_AGO,
1977 NL80211_BSS_BEACON_IES,
1980 __NL80211_BSS_AFTER_LAST,
1981 NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
1985 * enum nl80211_bss_status - BSS "status"
1986 * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
1987 * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
1988 * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
1990 * The BSS status is a BSS attribute in scan dumps, which
1991 * indicates the status the interface has wrt. this BSS.
1993 enum nl80211_bss_status {
1994 NL80211_BSS_STATUS_AUTHENTICATED,
1995 NL80211_BSS_STATUS_ASSOCIATED,
1996 NL80211_BSS_STATUS_IBSS_JOINED,
2000 * enum nl80211_auth_type - AuthenticationType
2002 * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
2003 * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
2004 * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
2005 * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
2006 * @__NL80211_AUTHTYPE_NUM: internal
2007 * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
2008 * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
2009 * trying multiple times); this is invalid in netlink -- leave out
2010 * the attribute for this on CONNECT commands.
2012 enum nl80211_auth_type {
2013 NL80211_AUTHTYPE_OPEN_SYSTEM,
2014 NL80211_AUTHTYPE_SHARED_KEY,
2015 NL80211_AUTHTYPE_FT,
2016 NL80211_AUTHTYPE_NETWORK_EAP,
2019 __NL80211_AUTHTYPE_NUM,
2020 NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1,
2021 NL80211_AUTHTYPE_AUTOMATIC
2025 * enum nl80211_key_type - Key Type
2026 * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
2027 * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
2028 * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
2029 * @NUM_NL80211_KEYTYPES: number of defined key types
2031 enum nl80211_key_type {
2032 NL80211_KEYTYPE_GROUP,
2033 NL80211_KEYTYPE_PAIRWISE,
2034 NL80211_KEYTYPE_PEERKEY,
2036 NUM_NL80211_KEYTYPES
2040 * enum nl80211_mfp - Management frame protection state
2041 * @NL80211_MFP_NO: Management frame protection not used
2042 * @NL80211_MFP_REQUIRED: Management frame protection required
2046 NL80211_MFP_REQUIRED,
2049 enum nl80211_wpa_versions {
2050 NL80211_WPA_VERSION_1 = 1 << 0,
2051 NL80211_WPA_VERSION_2 = 1 << 1,
2055 * enum nl80211_key_default_types - key default types
2056 * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
2057 * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
2059 * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
2061 * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
2063 enum nl80211_key_default_types {
2064 __NL80211_KEY_DEFAULT_TYPE_INVALID,
2065 NL80211_KEY_DEFAULT_TYPE_UNICAST,
2066 NL80211_KEY_DEFAULT_TYPE_MULTICAST,
2068 NUM_NL80211_KEY_DEFAULT_TYPES
2072 * enum nl80211_key_attributes - key attributes
2073 * @__NL80211_KEY_INVALID: invalid
2074 * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
2075 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC
2077 * @NL80211_KEY_IDX: key ID (u8, 0-3)
2078 * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11
2079 * section 7.3.2.25.1, e.g. 0x000FAC04)
2080 * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
2081 * CCMP keys, each six bytes in little endian
2082 * @NL80211_KEY_DEFAULT: flag indicating default key
2083 * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
2084 * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
2085 * specified the default depends on whether a MAC address was
2086 * given with the command using the key or not (u32)
2087 * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
2088 * attributes, specifying what a key should be set as default as.
2089 * See &enum nl80211_key_default_types.
2090 * @__NL80211_KEY_AFTER_LAST: internal
2091 * @NL80211_KEY_MAX: highest key attribute
2093 enum nl80211_key_attributes {
2094 __NL80211_KEY_INVALID,
2099 NL80211_KEY_DEFAULT,
2100 NL80211_KEY_DEFAULT_MGMT,
2102 NL80211_KEY_DEFAULT_TYPES,
2105 __NL80211_KEY_AFTER_LAST,
2106 NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
2110 * enum nl80211_tx_rate_attributes - TX rate set attributes
2111 * @__NL80211_TXRATE_INVALID: invalid
2112 * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
2113 * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
2114 * 1 = 500 kbps) but without the IE length restriction (at most
2115 * %NL80211_MAX_SUPP_RATES in a single array).
2116 * @__NL80211_TXRATE_AFTER_LAST: internal
2117 * @NL80211_TXRATE_MAX: highest TX rate attribute
2119 enum nl80211_tx_rate_attributes {
2120 __NL80211_TXRATE_INVALID,
2121 NL80211_TXRATE_LEGACY,
2124 __NL80211_TXRATE_AFTER_LAST,
2125 NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
2129 * enum nl80211_band - Frequency band
2130 * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
2131 * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
2138 enum nl80211_ps_state {
2139 NL80211_PS_DISABLED,
2144 * enum nl80211_attr_cqm - connection quality monitor attributes
2145 * @__NL80211_ATTR_CQM_INVALID: invalid
2146 * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
2147 * the threshold for the RSSI level at which an event will be sent. Zero
2149 * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
2150 * the minimum amount the RSSI level must change after an event before a
2151 * new event may be issued (to reduce effects of RSSI oscillation).
2152 * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
2153 * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
2154 * consecutive packets were not acknowledged by the peer
2155 * @__NL80211_ATTR_CQM_AFTER_LAST: internal
2156 * @NL80211_ATTR_CQM_MAX: highest key attribute
2158 enum nl80211_attr_cqm {
2159 __NL80211_ATTR_CQM_INVALID,
2160 NL80211_ATTR_CQM_RSSI_THOLD,
2161 NL80211_ATTR_CQM_RSSI_HYST,
2162 NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
2163 NL80211_ATTR_CQM_PKT_LOSS_EVENT,
2166 __NL80211_ATTR_CQM_AFTER_LAST,
2167 NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1
2171 * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event
2172 * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the
2173 * configured threshold
2174 * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
2175 * configured threshold
2177 enum nl80211_cqm_rssi_threshold_event {
2178 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
2179 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
2184 * enum nl80211_tx_power_setting - TX power adjustment
2185 * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power
2186 * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter
2187 * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter
2189 enum nl80211_tx_power_setting {
2190 NL80211_TX_POWER_AUTOMATIC,
2191 NL80211_TX_POWER_LIMITED,
2192 NL80211_TX_POWER_FIXED,
2196 * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute
2197 * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute
2198 * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has
2199 * a zero bit are ignored
2200 * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have
2201 * a bit for each byte in the pattern. The lowest-order bit corresponds
2202 * to the first byte of the pattern, but the bytes of the pattern are
2203 * in a little-endian-like format, i.e. the 9th byte of the pattern
2204 * corresponds to the lowest-order bit in the second byte of the mask.
2205 * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where
2206 * xx indicates "don't care") would be represented by a pattern of
2207 * twelve zero bytes, and a mask of "0xed,0x07".
2208 * Note that the pattern matching is done as though frames were not
2209 * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked
2210 * first (including SNAP header unpacking) and then matched.
2211 * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes
2212 * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number
2214 enum nl80211_wowlan_packet_pattern_attr {
2215 __NL80211_WOWLAN_PKTPAT_INVALID,
2216 NL80211_WOWLAN_PKTPAT_MASK,
2217 NL80211_WOWLAN_PKTPAT_PATTERN,
2219 NUM_NL80211_WOWLAN_PKTPAT,
2220 MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1,
2224 * struct nl80211_wowlan_pattern_support - pattern support information
2225 * @max_patterns: maximum number of patterns supported
2226 * @min_pattern_len: minimum length of each pattern
2227 * @max_pattern_len: maximum length of each pattern
2229 * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when
2230 * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the
2231 * capability information given by the kernel to userspace.
2233 struct nl80211_wowlan_pattern_support {
2235 __u32 min_pattern_len;
2236 __u32 max_pattern_len;
2237 } __attribute__((packed));
2240 * enum nl80211_wowlan_triggers - WoWLAN trigger definitions
2241 * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes
2242 * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
2243 * the chip into a special state -- works best with chips that have
2244 * support for low-power operation already (flag)
2245 * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
2246 * is detected is implementation-specific (flag)
2247 * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
2248 * by 16 repetitions of MAC addr, anywhere in payload) (flag)
2249 * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns
2250 * which are passed in an array of nested attributes, each nested attribute
2251 * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern.
2252 * Each pattern defines a wakeup packet. The matching is done on the MSDU,
2253 * i.e. as though the packet was an 802.3 packet, so the pattern matching
2254 * is done after the packet is converted to the MSDU.
2256 * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute
2257 * carrying a &struct nl80211_wowlan_pattern_support.
2258 * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
2259 * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
2261 enum nl80211_wowlan_triggers {
2262 __NL80211_WOWLAN_TRIG_INVALID,
2263 NL80211_WOWLAN_TRIG_ANY,
2264 NL80211_WOWLAN_TRIG_DISCONNECT,
2265 NL80211_WOWLAN_TRIG_MAGIC_PKT,
2266 NL80211_WOWLAN_TRIG_PKT_PATTERN,
2269 NUM_NL80211_WOWLAN_TRIG,
2270 MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1
2274 * enum nl80211_iface_limit_attrs - limit attributes
2275 * @NL80211_IFACE_LIMIT_UNSPEC: (reserved)
2276 * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that
2277 * can be chosen from this set of interface types (u32)
2278 * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a
2279 * flag attribute for each interface type in this set
2280 * @NUM_NL80211_IFACE_LIMIT: number of attributes
2281 * @MAX_NL80211_IFACE_LIMIT: highest attribute number
2283 enum nl80211_iface_limit_attrs {
2284 NL80211_IFACE_LIMIT_UNSPEC,
2285 NL80211_IFACE_LIMIT_MAX,
2286 NL80211_IFACE_LIMIT_TYPES,
2289 NUM_NL80211_IFACE_LIMIT,
2290 MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1
2294 * enum nl80211_if_combination_attrs -- interface combination attributes
2296 * @NL80211_IFACE_COMB_UNSPEC: (reserved)
2297 * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits
2298 * for given interface types, see &enum nl80211_iface_limit_attrs.
2299 * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of
2300 * interfaces that can be created in this group. This number doesn't
2301 * apply to interfaces purely managed in software, which are listed
2302 * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE.
2303 * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that
2304 * beacon intervals within this group must be all the same even for
2305 * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt
2306 * the infrastructure network's beacon interval.
2307 * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many
2308 * different channels may be used within this group.
2309 * @NUM_NL80211_IFACE_COMB: number of attributes
2310 * @MAX_NL80211_IFACE_COMB: highest attribute number
2313 * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
2314 * => allows an AP and a STA that must match BIs
2316 * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
2317 * => allows 8 of AP/GO
2319 * numbers = [ #{STA} <= 2 ], channels = 2, max = 2
2320 * => allows two STAs on different channels
2322 * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
2323 * => allows a STA plus three P2P interfaces
2325 * The list of these four possiblities could completely be contained
2326 * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
2327 * that any of these groups must match.
2329 * "Combinations" of just a single interface will not be listed here,
2330 * a single interface of any valid interface type is assumed to always
2331 * be possible by itself. This means that implicitly, for each valid
2332 * interface type, the following group always exists:
2333 * numbers = [ #{<type>} <= 1 ], channels = 1, max = 1
2335 enum nl80211_if_combination_attrs {
2336 NL80211_IFACE_COMB_UNSPEC,
2337 NL80211_IFACE_COMB_LIMITS,
2338 NL80211_IFACE_COMB_MAXNUM,
2339 NL80211_IFACE_COMB_STA_AP_BI_MATCH,
2340 NL80211_IFACE_COMB_NUM_CHANNELS,
2343 NUM_NL80211_IFACE_COMB,
2344 MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
2349 * enum nl80211_plink_state - state of a mesh peer link finite state machine
2351 * @NL80211_PLINK_LISTEN: initial state, considered the implicit
2352 * state of non existant mesh peer links
2353 * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
2355 * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
2356 * from this mesh peer
2357 * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been
2358 * received from this mesh peer
2359 * @NL80211_PLINK_ESTAB: mesh peer link is established
2360 * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
2361 * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
2362 * plink are discarded
2363 * @NUM_NL80211_PLINK_STATES: number of peer link states
2364 * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
2366 enum nl80211_plink_state {
2367 NL80211_PLINK_LISTEN,
2368 NL80211_PLINK_OPN_SNT,
2369 NL80211_PLINK_OPN_RCVD,
2370 NL80211_PLINK_CNF_RCVD,
2371 NL80211_PLINK_ESTAB,
2372 NL80211_PLINK_HOLDING,
2373 NL80211_PLINK_BLOCKED,
2376 NUM_NL80211_PLINK_STATES,
2377 MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
2380 #define NL80211_KCK_LEN 16
2381 #define NL80211_KEK_LEN 16
2382 #define NL80211_REPLAY_CTR_LEN 8
2385 * enum nl80211_rekey_data - attributes for GTK rekey offload
2386 * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes
2387 * @NL80211_REKEY_DATA_KEK: key encryption key (binary)
2388 * @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
2389 * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
2390 * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
2391 * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
2393 enum nl80211_rekey_data {
2394 __NL80211_REKEY_DATA_INVALID,
2395 NL80211_REKEY_DATA_KEK,
2396 NL80211_REKEY_DATA_KCK,
2397 NL80211_REKEY_DATA_REPLAY_CTR,
2400 NUM_NL80211_REKEY_DATA,
2401 MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1
2404 #endif /* __LINUX_NL80211_H */