2 #ifndef _LINUX_INTERRUPT_H
3 #define _LINUX_INTERRUPT_H
5 #include <linux/kernel.h>
6 #include <linux/linkage.h>
7 #include <linux/bitops.h>
8 #include <linux/preempt.h>
9 #include <linux/cpumask.h>
10 #include <linux/irqreturn.h>
11 #include <linux/hardirq.h>
12 #include <linux/sched.h>
13 #include <linux/irqflags.h>
14 #include <asm/atomic.h>
15 #include <asm/ptrace.h>
16 #include <asm/system.h>
19 * These correspond to the IORESOURCE_IRQ_* defines in
20 * linux/ioport.h to select the interrupt line behaviour. When
21 * requesting an interrupt without specifying a IRQF_TRIGGER, the
22 * setting should be assumed to be "as already configured", which
23 * may be as per machine or firmware initialisation.
25 #define IRQF_TRIGGER_NONE 0x00000000
26 #define IRQF_TRIGGER_RISING 0x00000001
27 #define IRQF_TRIGGER_FALLING 0x00000002
28 #define IRQF_TRIGGER_HIGH 0x00000004
29 #define IRQF_TRIGGER_LOW 0x00000008
30 #define IRQF_TRIGGER_MASK (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \
31 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
32 #define IRQF_TRIGGER_PROBE 0x00000010
35 * These flags used only by the kernel as part of the
36 * irq handling routines.
38 * IRQF_DISABLED - keep irqs disabled when calling the action handler
39 * IRQF_SAMPLE_RANDOM - irq is used to feed the random generator
40 * IRQF_SHARED - allow sharing the irq among several devices
41 * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur
42 * IRQF_TIMER - Flag to mark this interrupt as timer interrupt
44 #define IRQF_DISABLED 0x00000020
45 #define IRQF_SAMPLE_RANDOM 0x00000040
46 #define IRQF_SHARED 0x00000080
47 #define IRQF_PROBE_SHARED 0x00000100
48 #define IRQF_TIMER 0x00000200
49 #define IRQF_PERCPU 0x00000400
52 * Migration helpers. Scheduled for removal in 1/2007
53 * Do not use for new code !
55 #define SA_INTERRUPT IRQF_DISABLED
56 #define SA_SAMPLE_RANDOM IRQF_SAMPLE_RANDOM
57 #define SA_SHIRQ IRQF_SHARED
58 #define SA_PROBEIRQ IRQF_PROBE_SHARED
59 #define SA_PERCPU IRQF_PERCPU
61 #define SA_TRIGGER_LOW IRQF_TRIGGER_LOW
62 #define SA_TRIGGER_HIGH IRQF_TRIGGER_HIGH
63 #define SA_TRIGGER_FALLING IRQF_TRIGGER_FALLING
64 #define SA_TRIGGER_RISING IRQF_TRIGGER_RISING
65 #define SA_TRIGGER_MASK IRQF_TRIGGER_MASK
68 irqreturn_t (*handler)(int, void *, struct pt_regs *);
73 struct irqaction *next;
75 struct proc_dir_entry *dir;
78 extern irqreturn_t no_action(int cpl, void *dev_id, struct pt_regs *regs);
79 extern int request_irq(unsigned int,
80 irqreturn_t (*handler)(int, void *, struct pt_regs *),
81 unsigned long, const char *, void *);
82 extern void free_irq(unsigned int, void *);
85 * On lockdep we dont want to enable hardirqs in hardirq
86 * context. Use local_irq_enable_in_hardirq() to annotate
87 * kernel code that has to do this nevertheless (pretty much
88 * the only valid case is for old/broken hardware that is
91 * NOTE: in theory this might break fragile code that relies
92 * on hardirq delivery - in practice we dont seem to have such
93 * places left. So the only effect should be slightly increased
97 # define local_irq_enable_in_hardirq() do { } while (0)
99 # define local_irq_enable_in_hardirq() local_irq_enable()
102 #ifdef CONFIG_GENERIC_HARDIRQS
103 extern void disable_irq_nosync(unsigned int irq);
104 extern void disable_irq(unsigned int irq);
105 extern void enable_irq(unsigned int irq);
108 * Special lockdep variants of irq disabling/enabling.
109 * These should be used for locking constructs that
110 * know that a particular irq context which is disabled,
111 * and which is the only irq-context user of a lock,
112 * that it's safe to take the lock in the irq-disabled
113 * section without disabling hardirqs.
115 * On !CONFIG_LOCKDEP they are equivalent to the normal
116 * irq disable/enable methods.
118 static inline void disable_irq_nosync_lockdep(unsigned int irq)
120 disable_irq_nosync(irq);
121 #ifdef CONFIG_LOCKDEP
126 static inline void disable_irq_lockdep(unsigned int irq)
129 #ifdef CONFIG_LOCKDEP
134 static inline void enable_irq_lockdep(unsigned int irq)
136 #ifdef CONFIG_LOCKDEP
142 /* IRQ wakeup (PM) control: */
143 extern int set_irq_wake(unsigned int irq, unsigned int on);
145 static inline int enable_irq_wake(unsigned int irq)
147 return set_irq_wake(irq, 1);
150 static inline int disable_irq_wake(unsigned int irq)
152 return set_irq_wake(irq, 0);
155 #else /* !CONFIG_GENERIC_HARDIRQS */
157 * NOTE: non-genirq architectures, if they want to support the lock
158 * validator need to define the methods below in their asm/irq.h
159 * files, under an #ifdef CONFIG_LOCKDEP section.
161 # ifndef CONFIG_LOCKDEP
162 # define disable_irq_nosync_lockdep(irq) disable_irq_nosync(irq)
163 # define disable_irq_lockdep(irq) disable_irq(irq)
164 # define enable_irq_lockdep(irq) enable_irq(irq)
167 #endif /* CONFIG_GENERIC_HARDIRQS */
169 #ifndef __ARCH_SET_SOFTIRQ_PENDING
170 #define set_softirq_pending(x) (local_softirq_pending() = (x))
171 #define or_softirq_pending(x) (local_softirq_pending() |= (x))
175 * Temporary defines for UP kernels, until all code gets fixed.
178 static inline void __deprecated cli(void)
182 static inline void __deprecated sti(void)
186 static inline void __deprecated save_flags(unsigned long *x)
188 local_save_flags(*x);
190 #define save_flags(x) save_flags(&x)
191 static inline void __deprecated restore_flags(unsigned long x)
193 local_irq_restore(x);
196 static inline void __deprecated save_and_cli(unsigned long *x)
200 #define save_and_cli(x) save_and_cli(&x)
201 #endif /* CONFIG_SMP */
203 extern void local_bh_disable(void);
204 extern void __local_bh_enable(void);
205 extern void _local_bh_enable(void);
206 extern void local_bh_enable(void);
207 extern void local_bh_enable_ip(unsigned long ip);
209 /* PLEASE, avoid to allocate new softirqs, if you need not _really_ high
210 frequency threaded job scheduling. For almost all the purposes
211 tasklets are more than enough. F.e. all serial device BHs et
212 al. should be converted to tasklets, not to softirqs.
225 /* softirq mask and active fields moved to irq_cpustat_t in
226 * asm/hardirq.h to get better cache usage. KAO
229 struct softirq_action
231 void (*action)(struct softirq_action *);
235 asmlinkage void do_softirq(void);
236 extern void open_softirq(int nr, void (*action)(struct softirq_action*), void *data);
237 extern void softirq_init(void);
238 #define __raise_softirq_irqoff(nr) do { or_softirq_pending(1UL << (nr)); } while (0)
239 extern void FASTCALL(raise_softirq_irqoff(unsigned int nr));
240 extern void FASTCALL(raise_softirq(unsigned int nr));
243 /* Tasklets --- multithreaded analogue of BHs.
245 Main feature differing them of generic softirqs: tasklet
246 is running only on one CPU simultaneously.
248 Main feature differing them of BHs: different tasklets
249 may be run simultaneously on different CPUs.
252 * If tasklet_schedule() is called, then tasklet is guaranteed
253 to be executed on some cpu at least once after this.
254 * If the tasklet is already scheduled, but its excecution is still not
255 started, it will be executed only once.
256 * If this tasklet is already running on another CPU (or schedule is called
257 from tasklet itself), it is rescheduled for later.
258 * Tasklet is strictly serialized wrt itself, but not
259 wrt another tasklets. If client needs some intertask synchronization,
260 he makes it with spinlocks.
263 struct tasklet_struct
265 struct tasklet_struct *next;
268 void (*func)(unsigned long);
272 #define DECLARE_TASKLET(name, func, data) \
273 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data }
275 #define DECLARE_TASKLET_DISABLED(name, func, data) \
276 struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data }
281 TASKLET_STATE_SCHED, /* Tasklet is scheduled for execution */
282 TASKLET_STATE_RUN /* Tasklet is running (SMP only) */
286 static inline int tasklet_trylock(struct tasklet_struct *t)
288 return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state);
291 static inline void tasklet_unlock(struct tasklet_struct *t)
293 smp_mb__before_clear_bit();
294 clear_bit(TASKLET_STATE_RUN, &(t)->state);
297 static inline void tasklet_unlock_wait(struct tasklet_struct *t)
299 while (test_bit(TASKLET_STATE_RUN, &(t)->state)) { barrier(); }
302 #define tasklet_trylock(t) 1
303 #define tasklet_unlock_wait(t) do { } while (0)
304 #define tasklet_unlock(t) do { } while (0)
307 extern void FASTCALL(__tasklet_schedule(struct tasklet_struct *t));
309 static inline void tasklet_schedule(struct tasklet_struct *t)
311 if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
312 __tasklet_schedule(t);
315 extern void FASTCALL(__tasklet_hi_schedule(struct tasklet_struct *t));
317 static inline void tasklet_hi_schedule(struct tasklet_struct *t)
319 if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state))
320 __tasklet_hi_schedule(t);
324 static inline void tasklet_disable_nosync(struct tasklet_struct *t)
326 atomic_inc(&t->count);
327 smp_mb__after_atomic_inc();
330 static inline void tasklet_disable(struct tasklet_struct *t)
332 tasklet_disable_nosync(t);
333 tasklet_unlock_wait(t);
337 static inline void tasklet_enable(struct tasklet_struct *t)
339 smp_mb__before_atomic_dec();
340 atomic_dec(&t->count);
343 static inline void tasklet_hi_enable(struct tasklet_struct *t)
345 smp_mb__before_atomic_dec();
346 atomic_dec(&t->count);
349 extern void tasklet_kill(struct tasklet_struct *t);
350 extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu);
351 extern void tasklet_init(struct tasklet_struct *t,
352 void (*func)(unsigned long), unsigned long data);
355 * Autoprobing for irqs:
357 * probe_irq_on() and probe_irq_off() provide robust primitives
358 * for accurate IRQ probing during kernel initialization. They are
359 * reasonably simple to use, are not "fooled" by spurious interrupts,
360 * and, unlike other attempts at IRQ probing, they do not get hung on
361 * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards).
363 * For reasonably foolproof probing, use them as follows:
365 * 1. clear and/or mask the device's internal interrupt.
367 * 3. irqs = probe_irq_on(); // "take over" all unassigned idle IRQs
368 * 4. enable the device and cause it to trigger an interrupt.
369 * 5. wait for the device to interrupt, using non-intrusive polling or a delay.
370 * 6. irq = probe_irq_off(irqs); // get IRQ number, 0=none, negative=multiple
371 * 7. service the device to clear its pending interrupt.
372 * 8. loop again if paranoia is required.
374 * probe_irq_on() returns a mask of allocated irq's.
376 * probe_irq_off() takes the mask as a parameter,
377 * and returns the irq number which occurred,
378 * or zero if none occurred, or a negative irq number
379 * if more than one irq occurred.
382 #if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE)
383 static inline unsigned long probe_irq_on(void)
387 static inline int probe_irq_off(unsigned long val)
391 static inline unsigned int probe_irq_mask(unsigned long val)
396 extern unsigned long probe_irq_on(void); /* returns 0 on failure */
397 extern int probe_irq_off(unsigned long); /* returns 0 or negative on failure */
398 extern unsigned int probe_irq_mask(unsigned long); /* returns mask of ISA interrupts */