ide: move ->failed_pc to ide_drive_t
[pandora-kernel.git] / include / linux / ide.h
1 #ifndef _IDE_H
2 #define _IDE_H
3 /*
4  *  linux/include/linux/ide.h
5  *
6  *  Copyright (C) 1994-2002  Linus Torvalds & authors
7  */
8
9 #include <linux/init.h>
10 #include <linux/ioport.h>
11 #include <linux/ata.h>
12 #include <linux/blkdev.h>
13 #include <linux/proc_fs.h>
14 #include <linux/interrupt.h>
15 #include <linux/bitops.h>
16 #include <linux/bio.h>
17 #include <linux/device.h>
18 #include <linux/pci.h>
19 #include <linux/completion.h>
20 #include <linux/pm.h>
21 #ifdef CONFIG_BLK_DEV_IDEACPI
22 #include <acpi/acpi.h>
23 #endif
24 #include <asm/byteorder.h>
25 #include <asm/system.h>
26 #include <asm/io.h>
27 #include <asm/mutex.h>
28
29 #if defined(CONFIG_CRIS) || defined(CONFIG_FRV) || defined(CONFIG_MN10300)
30 # define SUPPORT_VLB_SYNC 0
31 #else
32 # define SUPPORT_VLB_SYNC 1
33 #endif
34
35 /*
36  * Probably not wise to fiddle with these
37  */
38 #define IDE_DEFAULT_MAX_FAILURES        1
39 #define ERROR_MAX       8       /* Max read/write errors per sector */
40 #define ERROR_RESET     3       /* Reset controller every 4th retry */
41 #define ERROR_RECAL     1       /* Recalibrate every 2nd retry */
42
43 /*
44  * Definitions for accessing IDE controller registers
45  */
46 #define IDE_NR_PORTS            (10)
47
48 struct ide_io_ports {
49         unsigned long   data_addr;
50
51         union {
52                 unsigned long error_addr;       /*   read:  error */
53                 unsigned long feature_addr;     /*  write: feature */
54         };
55
56         unsigned long   nsect_addr;
57         unsigned long   lbal_addr;
58         unsigned long   lbam_addr;
59         unsigned long   lbah_addr;
60
61         unsigned long   device_addr;
62
63         union {
64                 unsigned long status_addr;      /*  read: status  */
65                 unsigned long command_addr;     /* write: command */
66         };
67
68         unsigned long   ctl_addr;
69
70         unsigned long   irq_addr;
71 };
72
73 #define OK_STAT(stat,good,bad)  (((stat)&((good)|(bad)))==(good))
74
75 #define BAD_R_STAT      (ATA_BUSY | ATA_ERR)
76 #define BAD_W_STAT      (BAD_R_STAT | ATA_DF)
77 #define BAD_STAT        (BAD_R_STAT | ATA_DRQ)
78 #define DRIVE_READY     (ATA_DRDY | ATA_DSC)
79
80 #define BAD_CRC         (ATA_ABORTED | ATA_ICRC)
81
82 #define SATA_NR_PORTS           (3)     /* 16 possible ?? */
83
84 #define SATA_STATUS_OFFSET      (0)
85 #define SATA_ERROR_OFFSET       (1)
86 #define SATA_CONTROL_OFFSET     (2)
87
88 /*
89  * Our Physical Region Descriptor (PRD) table should be large enough
90  * to handle the biggest I/O request we are likely to see.  Since requests
91  * can have no more than 256 sectors, and since the typical blocksize is
92  * two or more sectors, we could get by with a limit of 128 entries here for
93  * the usual worst case.  Most requests seem to include some contiguous blocks,
94  * further reducing the number of table entries required.
95  *
96  * The driver reverts to PIO mode for individual requests that exceed
97  * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
98  * 100% of all crazy scenarios here is not necessary.
99  *
100  * As it turns out though, we must allocate a full 4KB page for this,
101  * so the two PRD tables (ide0 & ide1) will each get half of that,
102  * allowing each to have about 256 entries (8 bytes each) from this.
103  */
104 #define PRD_BYTES       8
105 #define PRD_ENTRIES     256
106
107 /*
108  * Some more useful definitions
109  */
110 #define PARTN_BITS      6       /* number of minor dev bits for partitions */
111 #define MAX_DRIVES      2       /* per interface; 2 assumed by lots of code */
112 #define SECTOR_SIZE     512
113
114 /*
115  * Timeouts for various operations:
116  */
117 enum {
118         /* spec allows up to 20ms */
119         WAIT_DRQ        = HZ / 10,      /* 100ms */
120         /* some laptops are very slow */
121         WAIT_READY      = 5 * HZ,       /* 5s */
122         /* should be less than 3ms (?), if all ATAPI CD is closed at boot */
123         WAIT_PIDENTIFY  = 10 * HZ,      /* 10s */
124         /* worst case when spinning up */
125         WAIT_WORSTCASE  = 30 * HZ,      /* 30s */
126         /* maximum wait for an IRQ to happen */
127         WAIT_CMD        = 10 * HZ,      /* 10s */
128         /* Some drives require a longer IRQ timeout. */
129         WAIT_FLOPPY_CMD = 50 * HZ,      /* 50s */
130         /*
131          * Some drives (for example, Seagate STT3401A Travan) require a very
132          * long timeout, because they don't return an interrupt or clear their
133          * BSY bit until after the command completes (even retension commands).
134          */
135         WAIT_TAPE_CMD   = 900 * HZ,     /* 900s */
136         /* minimum sleep time */
137         WAIT_MIN_SLEEP  = HZ / 50,      /* 20ms */
138 };
139
140 /*
141  * Op codes for special requests to be handled by ide_special_rq().
142  * Values should be in the range of 0x20 to 0x3f.
143  */
144 #define REQ_DRIVE_RESET         0x20
145 #define REQ_DEVSET_EXEC         0x21
146 #define REQ_PARK_HEADS          0x22
147 #define REQ_UNPARK_HEADS        0x23
148
149 /*
150  * Check for an interrupt and acknowledge the interrupt status
151  */
152 struct hwif_s;
153 typedef int (ide_ack_intr_t)(struct hwif_s *);
154
155 /*
156  * hwif_chipset_t is used to keep track of the specific hardware
157  * chipset used by each IDE interface, if known.
158  */
159 enum {          ide_unknown,    ide_generic,    ide_pci,
160                 ide_cmd640,     ide_dtc2278,    ide_ali14xx,
161                 ide_qd65xx,     ide_umc8672,    ide_ht6560b,
162                 ide_4drives,    ide_pmac,       ide_acorn,
163                 ide_au1xxx,     ide_palm3710
164 };
165
166 typedef u8 hwif_chipset_t;
167
168 /*
169  * Structure to hold all information about the location of this port
170  */
171 typedef struct hw_regs_s {
172         union {
173                 struct ide_io_ports     io_ports;
174                 unsigned long           io_ports_array[IDE_NR_PORTS];
175         };
176
177         int             irq;                    /* our irq number */
178         ide_ack_intr_t  *ack_intr;              /* acknowledge interrupt */
179         hwif_chipset_t  chipset;
180         struct device   *dev, *parent;
181         unsigned long   config;
182 } hw_regs_t;
183
184 static inline void ide_std_init_ports(hw_regs_t *hw,
185                                       unsigned long io_addr,
186                                       unsigned long ctl_addr)
187 {
188         unsigned int i;
189
190         for (i = 0; i <= 7; i++)
191                 hw->io_ports_array[i] = io_addr++;
192
193         hw->io_ports.ctl_addr = ctl_addr;
194 }
195
196 #define MAX_HWIFS       10
197
198 /*
199  * Now for the data we need to maintain per-drive:  ide_drive_t
200  */
201
202 #define ide_scsi        0x21
203 #define ide_disk        0x20
204 #define ide_optical     0x7
205 #define ide_cdrom       0x5
206 #define ide_tape        0x1
207 #define ide_floppy      0x0
208
209 /*
210  * Special Driver Flags
211  *
212  * set_geometry : respecify drive geometry
213  * recalibrate  : seek to cyl 0
214  * set_multmode : set multmode count
215  * reserved     : unused
216  */
217 typedef union {
218         unsigned all                    : 8;
219         struct {
220                 unsigned set_geometry   : 1;
221                 unsigned recalibrate    : 1;
222                 unsigned set_multmode   : 1;
223                 unsigned reserved       : 5;
224         } b;
225 } special_t;
226
227 /*
228  * Status returned from various ide_ functions
229  */
230 typedef enum {
231         ide_stopped,    /* no drive operation was started */
232         ide_started,    /* a drive operation was started, handler was set */
233 } ide_startstop_t;
234
235 enum {
236         IDE_TFLAG_LBA48                 = (1 << 0),
237         IDE_TFLAG_OUT_HOB_FEATURE       = (1 << 1),
238         IDE_TFLAG_OUT_HOB_NSECT         = (1 << 2),
239         IDE_TFLAG_OUT_HOB_LBAL          = (1 << 3),
240         IDE_TFLAG_OUT_HOB_LBAM          = (1 << 4),
241         IDE_TFLAG_OUT_HOB_LBAH          = (1 << 5),
242         IDE_TFLAG_OUT_HOB               = IDE_TFLAG_OUT_HOB_FEATURE |
243                                           IDE_TFLAG_OUT_HOB_NSECT |
244                                           IDE_TFLAG_OUT_HOB_LBAL |
245                                           IDE_TFLAG_OUT_HOB_LBAM |
246                                           IDE_TFLAG_OUT_HOB_LBAH,
247         IDE_TFLAG_OUT_FEATURE           = (1 << 6),
248         IDE_TFLAG_OUT_NSECT             = (1 << 7),
249         IDE_TFLAG_OUT_LBAL              = (1 << 8),
250         IDE_TFLAG_OUT_LBAM              = (1 << 9),
251         IDE_TFLAG_OUT_LBAH              = (1 << 10),
252         IDE_TFLAG_OUT_TF                = IDE_TFLAG_OUT_FEATURE |
253                                           IDE_TFLAG_OUT_NSECT |
254                                           IDE_TFLAG_OUT_LBAL |
255                                           IDE_TFLAG_OUT_LBAM |
256                                           IDE_TFLAG_OUT_LBAH,
257         IDE_TFLAG_OUT_DEVICE            = (1 << 11),
258         IDE_TFLAG_WRITE                 = (1 << 12),
259         IDE_TFLAG_CUSTOM_HANDLER        = (1 << 13),
260         IDE_TFLAG_DMA_PIO_FALLBACK      = (1 << 14),
261         IDE_TFLAG_IN_HOB_FEATURE        = (1 << 15),
262         IDE_TFLAG_IN_HOB_NSECT          = (1 << 16),
263         IDE_TFLAG_IN_HOB_LBAL           = (1 << 17),
264         IDE_TFLAG_IN_HOB_LBAM           = (1 << 18),
265         IDE_TFLAG_IN_HOB_LBAH           = (1 << 19),
266         IDE_TFLAG_IN_HOB_LBA            = IDE_TFLAG_IN_HOB_LBAL |
267                                           IDE_TFLAG_IN_HOB_LBAM |
268                                           IDE_TFLAG_IN_HOB_LBAH,
269         IDE_TFLAG_IN_HOB                = IDE_TFLAG_IN_HOB_FEATURE |
270                                           IDE_TFLAG_IN_HOB_NSECT |
271                                           IDE_TFLAG_IN_HOB_LBA,
272         IDE_TFLAG_IN_FEATURE            = (1 << 20),
273         IDE_TFLAG_IN_NSECT              = (1 << 21),
274         IDE_TFLAG_IN_LBAL               = (1 << 22),
275         IDE_TFLAG_IN_LBAM               = (1 << 23),
276         IDE_TFLAG_IN_LBAH               = (1 << 24),
277         IDE_TFLAG_IN_LBA                = IDE_TFLAG_IN_LBAL |
278                                           IDE_TFLAG_IN_LBAM |
279                                           IDE_TFLAG_IN_LBAH,
280         IDE_TFLAG_IN_TF                 = IDE_TFLAG_IN_NSECT |
281                                           IDE_TFLAG_IN_LBA,
282         IDE_TFLAG_IN_DEVICE             = (1 << 25),
283         IDE_TFLAG_HOB                   = IDE_TFLAG_OUT_HOB |
284                                           IDE_TFLAG_IN_HOB,
285         IDE_TFLAG_TF                    = IDE_TFLAG_OUT_TF |
286                                           IDE_TFLAG_IN_TF,
287         IDE_TFLAG_DEVICE                = IDE_TFLAG_OUT_DEVICE |
288                                           IDE_TFLAG_IN_DEVICE,
289         /* force 16-bit I/O operations */
290         IDE_TFLAG_IO_16BIT              = (1 << 26),
291         /* ide_task_t was allocated using kmalloc() */
292         IDE_TFLAG_DYN                   = (1 << 27),
293 };
294
295 enum {
296         IDE_FTFLAG_FLAGGED              = (1 << 0),
297         IDE_FTFLAG_SET_IN_FLAGS         = (1 << 1),
298         IDE_FTFLAG_OUT_DATA             = (1 << 2),
299         IDE_FTFLAG_IN_DATA              = (1 << 3),
300 };
301
302 struct ide_taskfile {
303         u8      hob_data;       /*  0: high data byte (for TASKFILE IOCTL) */
304
305         u8      hob_feature;    /*  1-5: additional data to support LBA48 */
306         u8      hob_nsect;
307         u8      hob_lbal;
308         u8      hob_lbam;
309         u8      hob_lbah;
310
311         u8      data;           /*  6: low data byte (for TASKFILE IOCTL) */
312
313         union {                 /*  7: */
314                 u8 error;       /*   read:  error */
315                 u8 feature;     /*  write: feature */
316         };
317
318         u8      nsect;          /*  8: number of sectors */
319         u8      lbal;           /*  9: LBA low */
320         u8      lbam;           /* 10: LBA mid */
321         u8      lbah;           /* 11: LBA high */
322
323         u8      device;         /* 12: device select */
324
325         union {                 /* 13: */
326                 u8 status;      /*  read: status  */
327                 u8 command;     /* write: command */
328         };
329 };
330
331 typedef struct ide_task_s {
332         union {
333                 struct ide_taskfile     tf;
334                 u8                      tf_array[14];
335         };
336         u8                      ftf_flags;      /* for TASKFILE ioctl */
337         u32                     tf_flags;
338         int                     data_phase;
339         struct request          *rq;            /* copy of request */
340         void                    *special;       /* valid_t generally */
341 } ide_task_t;
342
343 /* ATAPI packet command flags */
344 enum {
345         /* set when an error is considered normal - no retry (ide-tape) */
346         PC_FLAG_ABORT                   = (1 << 0),
347         PC_FLAG_SUPPRESS_ERROR          = (1 << 1),
348         PC_FLAG_WAIT_FOR_DSC            = (1 << 2),
349         PC_FLAG_DMA_OK                  = (1 << 3),
350         PC_FLAG_DMA_IN_PROGRESS         = (1 << 4),
351         PC_FLAG_DMA_ERROR               = (1 << 5),
352         PC_FLAG_WRITING                 = (1 << 6),
353 };
354
355 /*
356  * With each packet command, we allocate a buffer of IDE_PC_BUFFER_SIZE bytes.
357  * This is used for several packet commands (not for READ/WRITE commands).
358  */
359 #define IDE_PC_BUFFER_SIZE      256
360 #define ATAPI_WAIT_PC           (60 * HZ)
361
362 struct ide_atapi_pc {
363         /* actual packet bytes */
364         u8 c[12];
365         /* incremented on each retry */
366         int retries;
367         int error;
368
369         /* bytes to transfer */
370         int req_xfer;
371         /* bytes actually transferred */
372         int xferred;
373
374         /* data buffer */
375         u8 *buf;
376         /* current buffer position */
377         u8 *cur_pos;
378         int buf_size;
379         /* missing/available data on the current buffer */
380         int b_count;
381
382         /* the corresponding request */
383         struct request *rq;
384
385         unsigned long flags;
386
387         /*
388          * those are more or less driver-specific and some of them are subject
389          * to change/removal later.
390          */
391         u8 pc_buf[IDE_PC_BUFFER_SIZE];
392
393         /* idetape only */
394         struct idetape_bh *bh;
395         char *b_data;
396
397         struct scatterlist *sg;
398         unsigned int sg_cnt;
399
400         unsigned long timeout;
401 };
402
403 struct ide_devset;
404 struct ide_driver;
405
406 #ifdef CONFIG_BLK_DEV_IDEACPI
407 struct ide_acpi_drive_link;
408 struct ide_acpi_hwif_link;
409 #endif
410
411 struct ide_drive_s;
412
413 struct ide_disk_ops {
414         int             (*check)(struct ide_drive_s *, const char *);
415         int             (*get_capacity)(struct ide_drive_s *);
416         void            (*setup)(struct ide_drive_s *);
417         void            (*flush)(struct ide_drive_s *);
418         int             (*init_media)(struct ide_drive_s *, struct gendisk *);
419         int             (*set_doorlock)(struct ide_drive_s *, struct gendisk *,
420                                         int);
421         ide_startstop_t (*do_request)(struct ide_drive_s *, struct request *,
422                                       sector_t);
423         int             (*end_request)(struct ide_drive_s *, int, int);
424         int             (*ioctl)(struct ide_drive_s *, struct block_device *,
425                                  fmode_t, unsigned int, unsigned long);
426 };
427
428 /* ATAPI device flags */
429 enum {
430         IDE_AFLAG_DRQ_INTERRUPT         = (1 << 0),
431
432         /* ide-cd */
433         /* Drive cannot eject the disc. */
434         IDE_AFLAG_NO_EJECT              = (1 << 1),
435         /* Drive is a pre ATAPI 1.2 drive. */
436         IDE_AFLAG_PRE_ATAPI12           = (1 << 2),
437         /* TOC addresses are in BCD. */
438         IDE_AFLAG_TOCADDR_AS_BCD        = (1 << 3),
439         /* TOC track numbers are in BCD. */
440         IDE_AFLAG_TOCTRACKS_AS_BCD      = (1 << 4),
441         /*
442          * Drive does not provide data in multiples of SECTOR_SIZE
443          * when more than one interrupt is needed.
444          */
445         IDE_AFLAG_LIMIT_NFRAMES         = (1 << 5),
446         /* Saved TOC information is current. */
447         IDE_AFLAG_TOC_VALID             = (1 << 6),
448         /* We think that the drive door is locked. */
449         IDE_AFLAG_DOOR_LOCKED           = (1 << 7),
450         /* SET_CD_SPEED command is unsupported. */
451         IDE_AFLAG_NO_SPEED_SELECT       = (1 << 8),
452         IDE_AFLAG_VERTOS_300_SSD        = (1 << 9),
453         IDE_AFLAG_VERTOS_600_ESD        = (1 << 10),
454         IDE_AFLAG_SANYO_3CD             = (1 << 11),
455         IDE_AFLAG_FULL_CAPS_PAGE        = (1 << 12),
456         IDE_AFLAG_PLAY_AUDIO_OK         = (1 << 13),
457         IDE_AFLAG_LE_SPEED_FIELDS       = (1 << 14),
458
459         /* ide-floppy */
460         /* Avoid commands not supported in Clik drive */
461         IDE_AFLAG_CLIK_DRIVE            = (1 << 15),
462         /* Requires BH algorithm for packets */
463         IDE_AFLAG_ZIP_DRIVE             = (1 << 16),
464         /* Supports format progress report */
465         IDE_AFLAG_SRFP                  = (1 << 17),
466
467         /* ide-tape */
468         IDE_AFLAG_IGNORE_DSC            = (1 << 18),
469         /* 0 When the tape position is unknown */
470         IDE_AFLAG_ADDRESS_VALID         = (1 << 19),
471         /* Device already opened */
472         IDE_AFLAG_BUSY                  = (1 << 20),
473         /* Attempt to auto-detect the current user block size */
474         IDE_AFLAG_DETECT_BS             = (1 << 21),
475         /* Currently on a filemark */
476         IDE_AFLAG_FILEMARK              = (1 << 22),
477         /* 0 = no tape is loaded, so we don't rewind after ejecting */
478         IDE_AFLAG_MEDIUM_PRESENT        = (1 << 23),
479
480         IDE_AFLAG_NO_AUTOCLOSE          = (1 << 24),
481 };
482
483 /* device flags */
484 enum {
485         /* restore settings after device reset */
486         IDE_DFLAG_KEEP_SETTINGS         = (1 << 0),
487         /* device is using DMA for read/write */
488         IDE_DFLAG_USING_DMA             = (1 << 1),
489         /* okay to unmask other IRQs */
490         IDE_DFLAG_UNMASK                = (1 << 2),
491         /* don't attempt flushes */
492         IDE_DFLAG_NOFLUSH               = (1 << 3),
493         /* DSC overlap */
494         IDE_DFLAG_DSC_OVERLAP           = (1 << 4),
495         /* give potential excess bandwidth */
496         IDE_DFLAG_NICE1                 = (1 << 5),
497         /* device is physically present */
498         IDE_DFLAG_PRESENT               = (1 << 6),
499         /* id read from device (synthetic if not set) */
500         IDE_DFLAG_ID_READ               = (1 << 8),
501         IDE_DFLAG_NOPROBE               = (1 << 9),
502         /* need to do check_media_change() */
503         IDE_DFLAG_REMOVABLE             = (1 << 10),
504         /* needed for removable devices */
505         IDE_DFLAG_ATTACH                = (1 << 11),
506         IDE_DFLAG_FORCED_GEOM           = (1 << 12),
507         /* disallow setting unmask bit */
508         IDE_DFLAG_NO_UNMASK             = (1 << 13),
509         /* disallow enabling 32-bit I/O */
510         IDE_DFLAG_NO_IO_32BIT           = (1 << 14),
511         /* for removable only: door lock/unlock works */
512         IDE_DFLAG_DOORLOCKING           = (1 << 15),
513         /* disallow DMA */
514         IDE_DFLAG_NODMA                 = (1 << 16),
515         /* powermanagment told us not to do anything, so sleep nicely */
516         IDE_DFLAG_BLOCKED               = (1 << 17),
517         /* sleeping & sleep field valid */
518         IDE_DFLAG_SLEEPING              = (1 << 18),
519         IDE_DFLAG_POST_RESET            = (1 << 19),
520         IDE_DFLAG_UDMA33_WARNED         = (1 << 20),
521         IDE_DFLAG_LBA48                 = (1 << 21),
522         /* status of write cache */
523         IDE_DFLAG_WCACHE                = (1 << 22),
524         /* used for ignoring ATA_DF */
525         IDE_DFLAG_NOWERR                = (1 << 23),
526         /* retrying in PIO */
527         IDE_DFLAG_DMA_PIO_RETRY         = (1 << 24),
528         IDE_DFLAG_LBA                   = (1 << 25),
529         /* don't unload heads */
530         IDE_DFLAG_NO_UNLOAD             = (1 << 26),
531         /* heads unloaded, please don't reset port */
532         IDE_DFLAG_PARKED                = (1 << 27),
533         IDE_DFLAG_MEDIA_CHANGED         = (1 << 28),
534         /* write protect */
535         IDE_DFLAG_WP                    = (1 << 29),
536         IDE_DFLAG_FORMAT_IN_PROGRESS    = (1 << 30),
537 };
538
539 struct ide_drive_s {
540         char            name[4];        /* drive name, such as "hda" */
541         char            driver_req[10]; /* requests specific driver */
542
543         struct request_queue    *queue; /* request queue */
544
545         struct request          *rq;    /* current request */
546         void            *driver_data;   /* extra driver data */
547         u16                     *id;    /* identification info */
548 #ifdef CONFIG_IDE_PROC_FS
549         struct proc_dir_entry *proc;    /* /proc/ide/ directory entry */
550         const struct ide_proc_devset *settings; /* /proc/ide/ drive settings */
551 #endif
552         struct hwif_s           *hwif;  /* actually (ide_hwif_t *) */
553
554         const struct ide_disk_ops *disk_ops;
555
556         unsigned long dev_flags;
557
558         unsigned long sleep;            /* sleep until this time */
559         unsigned long timeout;          /* max time to wait for irq */
560
561         special_t       special;        /* special action flags */
562
563         u8      select;                 /* basic drive/head select reg value */
564         u8      retry_pio;              /* retrying dma capable host in pio */
565         u8      waiting_for_dma;        /* dma currently in progress */
566         u8      dma;                    /* atapi dma flag */
567
568         u8      quirk_list;     /* considered quirky, set for a specific host */
569         u8      init_speed;     /* transfer rate set at boot */
570         u8      current_speed;  /* current transfer rate set */
571         u8      desired_speed;  /* desired transfer rate set */
572         u8      dn;             /* now wide spread use */
573         u8      acoustic;       /* acoustic management */
574         u8      media;          /* disk, cdrom, tape, floppy, ... */
575         u8      ready_stat;     /* min status value for drive ready */
576         u8      mult_count;     /* current multiple sector setting */
577         u8      mult_req;       /* requested multiple sector setting */
578         u8      io_32bit;       /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
579         u8      bad_wstat;      /* used for ignoring ATA_DF */
580         u8      head;           /* "real" number of heads */
581         u8      sect;           /* "real" sectors per track */
582         u8      bios_head;      /* BIOS/fdisk/LILO number of heads */
583         u8      bios_sect;      /* BIOS/fdisk/LILO sectors per track */
584
585         /* delay this long before sending packet command */
586         u8 pc_delay;
587
588         unsigned int    bios_cyl;       /* BIOS/fdisk/LILO number of cyls */
589         unsigned int    cyl;            /* "real" number of cyls */
590         unsigned int    drive_data;     /* used by set_pio_mode/selectproc */
591         unsigned int    failures;       /* current failure count */
592         unsigned int    max_failures;   /* maximum allowed failure count */
593         u64             probed_capacity;/* initial reported media capacity (ide-cd only currently) */
594
595         u64             capacity64;     /* total number of sectors */
596
597         int             lun;            /* logical unit */
598         int             crc_count;      /* crc counter to reduce drive speed */
599
600         unsigned long   debug_mask;     /* debugging levels switch */
601
602 #ifdef CONFIG_BLK_DEV_IDEACPI
603         struct ide_acpi_drive_link *acpidata;
604 #endif
605         struct list_head list;
606         struct device   gendev;
607         struct completion gendev_rel_comp;      /* to deal with device release() */
608
609         /* current packet command */
610         struct ide_atapi_pc *pc;
611
612         /* last failed packet command */
613         struct ide_atapi_pc *failed_pc;
614
615         /* callback for packet commands */
616         void (*pc_callback)(struct ide_drive_s *, int);
617
618         void (*pc_update_buffers)(struct ide_drive_s *, struct ide_atapi_pc *);
619         int  (*pc_io_buffers)(struct ide_drive_s *, struct ide_atapi_pc *,
620                               unsigned int, int);
621
622         ide_startstop_t (*irq_handler)(struct ide_drive_s *);
623
624         unsigned long atapi_flags;
625
626         struct ide_atapi_pc request_sense_pc;
627         struct request request_sense_rq;
628 };
629
630 typedef struct ide_drive_s ide_drive_t;
631
632 #define to_ide_device(dev)              container_of(dev, ide_drive_t, gendev)
633
634 #define to_ide_drv(obj, cont_type)      \
635         container_of(obj, struct cont_type, dev)
636
637 #define ide_drv_g(disk, cont_type)      \
638         container_of((disk)->private_data, struct cont_type, driver)
639
640 struct ide_port_info;
641
642 struct ide_tp_ops {
643         void    (*exec_command)(struct hwif_s *, u8);
644         u8      (*read_status)(struct hwif_s *);
645         u8      (*read_altstatus)(struct hwif_s *);
646
647         void    (*set_irq)(struct hwif_s *, int);
648
649         void    (*tf_load)(ide_drive_t *, struct ide_task_s *);
650         void    (*tf_read)(ide_drive_t *, struct ide_task_s *);
651
652         void    (*input_data)(ide_drive_t *, struct request *, void *,
653                               unsigned int);
654         void    (*output_data)(ide_drive_t *, struct request *, void *,
655                                unsigned int);
656 };
657
658 extern const struct ide_tp_ops default_tp_ops;
659
660 /**
661  * struct ide_port_ops - IDE port operations
662  *
663  * @init_dev:           host specific initialization of a device
664  * @set_pio_mode:       routine to program host for PIO mode
665  * @set_dma_mode:       routine to program host for DMA mode
666  * @selectproc:         tweaks hardware to select drive
667  * @reset_poll:         chipset polling based on hba specifics
668  * @pre_reset:          chipset specific changes to default for device-hba resets
669  * @resetproc:          routine to reset controller after a disk reset
670  * @maskproc:           special host masking for drive selection
671  * @quirkproc:          check host's drive quirk list
672  * @clear_irq:          clear IRQ
673  *
674  * @mdma_filter:        filter MDMA modes
675  * @udma_filter:        filter UDMA modes
676  *
677  * @cable_detect:       detect cable type
678  */
679 struct ide_port_ops {
680         void    (*init_dev)(ide_drive_t *);
681         void    (*set_pio_mode)(ide_drive_t *, const u8);
682         void    (*set_dma_mode)(ide_drive_t *, const u8);
683         void    (*selectproc)(ide_drive_t *);
684         int     (*reset_poll)(ide_drive_t *);
685         void    (*pre_reset)(ide_drive_t *);
686         void    (*resetproc)(ide_drive_t *);
687         void    (*maskproc)(ide_drive_t *, int);
688         void    (*quirkproc)(ide_drive_t *);
689         void    (*clear_irq)(ide_drive_t *);
690
691         u8      (*mdma_filter)(ide_drive_t *);
692         u8      (*udma_filter)(ide_drive_t *);
693
694         u8      (*cable_detect)(struct hwif_s *);
695 };
696
697 struct ide_dma_ops {
698         void    (*dma_host_set)(struct ide_drive_s *, int);
699         int     (*dma_setup)(struct ide_drive_s *);
700         void    (*dma_exec_cmd)(struct ide_drive_s *, u8);
701         void    (*dma_start)(struct ide_drive_s *);
702         int     (*dma_end)(struct ide_drive_s *);
703         int     (*dma_test_irq)(struct ide_drive_s *);
704         void    (*dma_lost_irq)(struct ide_drive_s *);
705         void    (*dma_timeout)(struct ide_drive_s *);
706         /*
707          * The following method is optional and only required to be
708          * implemented for the SFF-8038i compatible controllers.
709          */
710         u8      (*dma_sff_read_status)(struct hwif_s *);
711 };
712
713 struct ide_host;
714
715 typedef struct hwif_s {
716         struct hwif_s *mate;            /* other hwif from same PCI chip */
717         struct proc_dir_entry *proc;    /* /proc/ide/ directory entry */
718
719         struct ide_host *host;
720
721         char name[6];                   /* name of interface, eg. "ide0" */
722
723         struct ide_io_ports     io_ports;
724
725         unsigned long   sata_scr[SATA_NR_PORTS];
726
727         ide_drive_t     *devices[MAX_DRIVES + 1];
728
729         u8 major;       /* our major number */
730         u8 index;       /* 0 for ide0; 1 for ide1; ... */
731         u8 channel;     /* for dual-port chips: 0=primary, 1=secondary */
732
733         u32 host_flags;
734
735         u8 pio_mask;
736
737         u8 ultra_mask;
738         u8 mwdma_mask;
739         u8 swdma_mask;
740
741         u8 cbl;         /* cable type */
742
743         hwif_chipset_t chipset; /* sub-module for tuning.. */
744
745         struct device *dev;
746
747         ide_ack_intr_t *ack_intr;
748
749         void (*rw_disk)(ide_drive_t *, struct request *);
750
751         const struct ide_tp_ops         *tp_ops;
752         const struct ide_port_ops       *port_ops;
753         const struct ide_dma_ops        *dma_ops;
754
755         /* dma physical region descriptor table (cpu view) */
756         unsigned int    *dmatable_cpu;
757         /* dma physical region descriptor table (dma view) */
758         dma_addr_t      dmatable_dma;
759
760         /* maximum number of PRD table entries */
761         int prd_max_nents;
762         /* PRD entry size in bytes */
763         int prd_ent_size;
764
765         /* Scatter-gather list used to build the above */
766         struct scatterlist *sg_table;
767         int sg_max_nents;               /* Maximum number of entries in it */
768         int sg_nents;                   /* Current number of entries in it */
769         int orig_sg_nents;
770         int sg_dma_direction;           /* dma transfer direction */
771
772         struct ide_task_s task;         /* current command */
773
774         unsigned int nsect;
775         unsigned int nleft;
776         struct scatterlist *cursg;
777         unsigned int cursg_ofs;
778
779         int             rqsize;         /* max sectors per request */
780         int             irq;            /* our irq number */
781
782         unsigned long   dma_base;       /* base addr for dma ports */
783
784         unsigned long   config_data;    /* for use by chipset-specific code */
785         unsigned long   select_data;    /* for use by chipset-specific code */
786
787         unsigned long   extra_base;     /* extra addr for dma ports */
788         unsigned        extra_ports;    /* number of extra dma ports */
789
790         unsigned        present    : 1; /* this interface exists */
791         unsigned        busy       : 1; /* serializes devices on a port */
792
793         struct device           gendev;
794         struct device           *portdev;
795
796         struct completion gendev_rel_comp; /* To deal with device release() */
797
798         void            *hwif_data;     /* extra hwif data */
799
800 #ifdef CONFIG_BLK_DEV_IDEACPI
801         struct ide_acpi_hwif_link *acpidata;
802 #endif
803
804         /* IRQ handler, if active */
805         ide_startstop_t (*handler)(ide_drive_t *);
806
807         /* BOOL: polling active & poll_timeout field valid */
808         unsigned int polling : 1;
809
810         /* current drive */
811         ide_drive_t *cur_dev;
812
813         /* current request */
814         struct request *rq;
815
816         /* failsafe timer */
817         struct timer_list timer;
818         /* timeout value during long polls */
819         unsigned long poll_timeout;
820         /* queried upon timeouts */
821         int (*expiry)(ide_drive_t *);
822
823         int req_gen;
824         int req_gen_timer;
825
826         spinlock_t lock;
827 } ____cacheline_internodealigned_in_smp ide_hwif_t;
828
829 #define MAX_HOST_PORTS 4
830
831 struct ide_host {
832         ide_hwif_t      *ports[MAX_HOST_PORTS + 1];
833         unsigned int    n_ports;
834         struct device   *dev[2];
835
836         int             (*init_chipset)(struct pci_dev *);
837
838         void            (*get_lock)(irq_handler_t, void *);
839         void            (*release_lock)(void);
840
841         irq_handler_t   irq_handler;
842
843         unsigned long   host_flags;
844
845         int             irq_flags;
846
847         void            *host_priv;
848         ide_hwif_t      *cur_port;      /* for hosts requiring serialization */
849
850         /* used for hosts requiring serialization */
851         volatile unsigned long  host_busy;
852 };
853
854 #define IDE_HOST_BUSY 0
855
856 /*
857  *  internal ide interrupt handler type
858  */
859 typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
860 typedef int (ide_expiry_t)(ide_drive_t *);
861
862 /* used by ide-cd, ide-floppy, etc. */
863 typedef void (xfer_func_t)(ide_drive_t *, struct request *rq, void *, unsigned);
864
865 extern struct mutex ide_setting_mtx;
866
867 /*
868  * configurable drive settings
869  */
870
871 #define DS_SYNC (1 << 0)
872
873 struct ide_devset {
874         int             (*get)(ide_drive_t *);
875         int             (*set)(ide_drive_t *, int);
876         unsigned int    flags;
877 };
878
879 #define __DEVSET(_flags, _get, _set) { \
880         .flags  = _flags, \
881         .get    = _get, \
882         .set    = _set, \
883 }
884
885 #define ide_devset_get(name, field) \
886 static int get_##name(ide_drive_t *drive) \
887 { \
888         return drive->field; \
889 }
890
891 #define ide_devset_set(name, field) \
892 static int set_##name(ide_drive_t *drive, int arg) \
893 { \
894         drive->field = arg; \
895         return 0; \
896 }
897
898 #define ide_devset_get_flag(name, flag) \
899 static int get_##name(ide_drive_t *drive) \
900 { \
901         return !!(drive->dev_flags & flag); \
902 }
903
904 #define ide_devset_set_flag(name, flag) \
905 static int set_##name(ide_drive_t *drive, int arg) \
906 { \
907         if (arg) \
908                 drive->dev_flags |= flag; \
909         else \
910                 drive->dev_flags &= ~flag; \
911         return 0; \
912 }
913
914 #define __IDE_DEVSET(_name, _flags, _get, _set) \
915 const struct ide_devset ide_devset_##_name = \
916         __DEVSET(_flags, _get, _set)
917
918 #define IDE_DEVSET(_name, _flags, _get, _set) \
919 static __IDE_DEVSET(_name, _flags, _get, _set)
920
921 #define ide_devset_rw(_name, _func) \
922 IDE_DEVSET(_name, 0, get_##_func, set_##_func)
923
924 #define ide_devset_w(_name, _func) \
925 IDE_DEVSET(_name, 0, NULL, set_##_func)
926
927 #define ide_ext_devset_rw(_name, _func) \
928 __IDE_DEVSET(_name, 0, get_##_func, set_##_func)
929
930 #define ide_ext_devset_rw_sync(_name, _func) \
931 __IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
932
933 #define ide_decl_devset(_name) \
934 extern const struct ide_devset ide_devset_##_name
935
936 ide_decl_devset(io_32bit);
937 ide_decl_devset(keepsettings);
938 ide_decl_devset(pio_mode);
939 ide_decl_devset(unmaskirq);
940 ide_decl_devset(using_dma);
941
942 #ifdef CONFIG_IDE_PROC_FS
943 /*
944  * /proc/ide interface
945  */
946
947 #define ide_devset_rw_field(_name, _field) \
948 ide_devset_get(_name, _field); \
949 ide_devset_set(_name, _field); \
950 IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
951
952 #define ide_devset_rw_flag(_name, _field) \
953 ide_devset_get_flag(_name, _field); \
954 ide_devset_set_flag(_name, _field); \
955 IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
956
957 struct ide_proc_devset {
958         const char              *name;
959         const struct ide_devset *setting;
960         int                     min, max;
961         int                     (*mulf)(ide_drive_t *);
962         int                     (*divf)(ide_drive_t *);
963 };
964
965 #define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \
966         .name = __stringify(_name), \
967         .setting = &ide_devset_##_name, \
968         .min = _min, \
969         .max = _max, \
970         .mulf = _mulf, \
971         .divf = _divf, \
972 }
973
974 #define IDE_PROC_DEVSET(_name, _min, _max) \
975 __IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL)
976
977 typedef struct {
978         const char      *name;
979         mode_t          mode;
980         read_proc_t     *read_proc;
981         write_proc_t    *write_proc;
982 } ide_proc_entry_t;
983
984 void proc_ide_create(void);
985 void proc_ide_destroy(void);
986 void ide_proc_register_port(ide_hwif_t *);
987 void ide_proc_port_register_devices(ide_hwif_t *);
988 void ide_proc_unregister_device(ide_drive_t *);
989 void ide_proc_unregister_port(ide_hwif_t *);
990 void ide_proc_register_driver(ide_drive_t *, struct ide_driver *);
991 void ide_proc_unregister_driver(ide_drive_t *, struct ide_driver *);
992
993 read_proc_t proc_ide_read_capacity;
994 read_proc_t proc_ide_read_geometry;
995
996 /*
997  * Standard exit stuff:
998  */
999 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) \
1000 {                                       \
1001         len -= off;                     \
1002         if (len < count) {              \
1003                 *eof = 1;               \
1004                 if (len <= 0)           \
1005                         return 0;       \
1006         } else                          \
1007                 len = count;            \
1008         *start = page + off;            \
1009         return len;                     \
1010 }
1011 #else
1012 static inline void proc_ide_create(void) { ; }
1013 static inline void proc_ide_destroy(void) { ; }
1014 static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
1015 static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; }
1016 static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; }
1017 static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
1018 static inline void ide_proc_register_driver(ide_drive_t *drive,
1019                                             struct ide_driver *driver) { ; }
1020 static inline void ide_proc_unregister_driver(ide_drive_t *drive,
1021                                               struct ide_driver *driver) { ; }
1022 #define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
1023 #endif
1024
1025 enum {
1026         /* enter/exit functions */
1027         IDE_DBG_FUNC =                  (1 << 0),
1028         /* sense key/asc handling */
1029         IDE_DBG_SENSE =                 (1 << 1),
1030         /* packet commands handling */
1031         IDE_DBG_PC =                    (1 << 2),
1032         /* request handling */
1033         IDE_DBG_RQ =                    (1 << 3),
1034         /* driver probing/setup */
1035         IDE_DBG_PROBE =                 (1 << 4),
1036 };
1037
1038 /* DRV_NAME has to be defined in the driver before using the macro below */
1039 #define __ide_debug_log(lvl, fmt, args...)                              \
1040 {                                                                       \
1041         if (unlikely(drive->debug_mask & lvl))                          \
1042                 printk(KERN_INFO DRV_NAME ": %s: " fmt "\n",            \
1043                                           __func__, ## args);           \
1044 }
1045
1046 /*
1047  * Power Management state machine (rq->pm->pm_step).
1048  *
1049  * For each step, the core calls ide_start_power_step() first.
1050  * This can return:
1051  *      - ide_stopped : In this case, the core calls us back again unless
1052  *                      step have been set to ide_power_state_completed.
1053  *      - ide_started : In this case, the channel is left busy until an
1054  *                      async event (interrupt) occurs.
1055  * Typically, ide_start_power_step() will issue a taskfile request with
1056  * do_rw_taskfile().
1057  *
1058  * Upon reception of the interrupt, the core will call ide_complete_power_step()
1059  * with the error code if any. This routine should update the step value
1060  * and return. It should not start a new request. The core will call
1061  * ide_start_power_step() for the new step value, unless step have been
1062  * set to IDE_PM_COMPLETED.
1063  */
1064 enum {
1065         IDE_PM_START_SUSPEND,
1066         IDE_PM_FLUSH_CACHE      = IDE_PM_START_SUSPEND,
1067         IDE_PM_STANDBY,
1068
1069         IDE_PM_START_RESUME,
1070         IDE_PM_RESTORE_PIO      = IDE_PM_START_RESUME,
1071         IDE_PM_IDLE,
1072         IDE_PM_RESTORE_DMA,
1073
1074         IDE_PM_COMPLETED,
1075 };
1076
1077 int generic_ide_suspend(struct device *, pm_message_t);
1078 int generic_ide_resume(struct device *);
1079
1080 void ide_complete_power_step(ide_drive_t *, struct request *);
1081 ide_startstop_t ide_start_power_step(ide_drive_t *, struct request *);
1082 void ide_complete_pm_rq(ide_drive_t *, struct request *);
1083 void ide_check_pm_state(ide_drive_t *, struct request *);
1084
1085 /*
1086  * Subdrivers support.
1087  *
1088  * The gendriver.owner field should be set to the module owner of this driver.
1089  * The gendriver.name field should be set to the name of this driver
1090  */
1091 struct ide_driver {
1092         const char                      *version;
1093         ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
1094         int             (*end_request)(ide_drive_t *, int, int);
1095         struct device_driver    gen_driver;
1096         int             (*probe)(ide_drive_t *);
1097         void            (*remove)(ide_drive_t *);
1098         void            (*resume)(ide_drive_t *);
1099         void            (*shutdown)(ide_drive_t *);
1100 #ifdef CONFIG_IDE_PROC_FS
1101         ide_proc_entry_t *              (*proc_entries)(ide_drive_t *);
1102         const struct ide_proc_devset *  (*proc_devsets)(ide_drive_t *);
1103 #endif
1104 };
1105
1106 #define to_ide_driver(drv) container_of(drv, struct ide_driver, gen_driver)
1107
1108 int ide_device_get(ide_drive_t *);
1109 void ide_device_put(ide_drive_t *);
1110
1111 struct ide_ioctl_devset {
1112         unsigned int    get_ioctl;
1113         unsigned int    set_ioctl;
1114         const struct ide_devset *setting;
1115 };
1116
1117 int ide_setting_ioctl(ide_drive_t *, struct block_device *, unsigned int,
1118                       unsigned long, const struct ide_ioctl_devset *);
1119
1120 int generic_ide_ioctl(ide_drive_t *, struct block_device *, unsigned, unsigned long);
1121
1122 extern int ide_vlb_clk;
1123 extern int ide_pci_clk;
1124
1125 int ide_end_request(ide_drive_t *, int, int);
1126 int ide_end_dequeued_request(ide_drive_t *, struct request *, int, int);
1127 void ide_kill_rq(ide_drive_t *, struct request *);
1128
1129 void __ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int,
1130                        ide_expiry_t *);
1131 void ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int,
1132                      ide_expiry_t *);
1133
1134 void ide_execute_command(ide_drive_t *, u8, ide_handler_t *, unsigned int,
1135                          ide_expiry_t *);
1136
1137 void ide_execute_pkt_cmd(ide_drive_t *);
1138
1139 void ide_pad_transfer(ide_drive_t *, int, int);
1140
1141 ide_startstop_t ide_error(ide_drive_t *, const char *, u8);
1142
1143 void ide_fix_driveid(u16 *);
1144
1145 extern void ide_fixstring(u8 *, const int, const int);
1146
1147 int ide_busy_sleep(ide_hwif_t *, unsigned long, int);
1148
1149 int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
1150
1151 ide_startstop_t ide_do_park_unpark(ide_drive_t *, struct request *);
1152 ide_startstop_t ide_do_devset(ide_drive_t *, struct request *);
1153
1154 extern ide_startstop_t ide_do_reset (ide_drive_t *);
1155
1156 extern int ide_devset_execute(ide_drive_t *drive,
1157                               const struct ide_devset *setting, int arg);
1158
1159 void ide_complete_task(ide_drive_t *, ide_task_t *, u8, u8);
1160 void ide_complete_rq(ide_drive_t *, u8);
1161
1162 void ide_tf_dump(const char *, struct ide_taskfile *);
1163
1164 void ide_exec_command(ide_hwif_t *, u8);
1165 u8 ide_read_status(ide_hwif_t *);
1166 u8 ide_read_altstatus(ide_hwif_t *);
1167
1168 void ide_set_irq(ide_hwif_t *, int);
1169
1170 void ide_tf_load(ide_drive_t *, ide_task_t *);
1171 void ide_tf_read(ide_drive_t *, ide_task_t *);
1172
1173 void ide_input_data(ide_drive_t *, struct request *, void *, unsigned int);
1174 void ide_output_data(ide_drive_t *, struct request *, void *, unsigned int);
1175
1176 int ide_io_buffers(ide_drive_t *, struct ide_atapi_pc *, unsigned int, int);
1177
1178 extern void SELECT_DRIVE(ide_drive_t *);
1179 void SELECT_MASK(ide_drive_t *, int);
1180
1181 u8 ide_read_error(ide_drive_t *);
1182 void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
1183
1184 int ide_check_atapi_device(ide_drive_t *, const char *);
1185
1186 void ide_init_pc(struct ide_atapi_pc *);
1187
1188 /* Disk head parking */
1189 extern wait_queue_head_t ide_park_wq;
1190 ssize_t ide_park_show(struct device *dev, struct device_attribute *attr,
1191                       char *buf);
1192 ssize_t ide_park_store(struct device *dev, struct device_attribute *attr,
1193                        const char *buf, size_t len);
1194
1195 /*
1196  * Special requests for ide-tape block device strategy routine.
1197  *
1198  * In order to service a character device command, we add special requests to
1199  * the tail of our block device request queue and wait for their completion.
1200  */
1201 enum {
1202         REQ_IDETAPE_PC1         = (1 << 0), /* packet command (first stage) */
1203         REQ_IDETAPE_PC2         = (1 << 1), /* packet command (second stage) */
1204         REQ_IDETAPE_READ        = (1 << 2),
1205         REQ_IDETAPE_WRITE       = (1 << 3),
1206 };
1207
1208 int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *);
1209
1210 int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
1211 int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
1212 int ide_set_media_lock(ide_drive_t *, struct gendisk *, int);
1213 void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *);
1214 void ide_retry_pc(ide_drive_t *, struct gendisk *);
1215
1216 int ide_cd_expiry(ide_drive_t *);
1217
1218 int ide_cd_get_xferlen(struct request *);
1219
1220 ide_startstop_t ide_issue_pc(ide_drive_t *);
1221
1222 ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
1223
1224 void task_end_request(ide_drive_t *, struct request *, u8);
1225
1226 int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *, u16);
1227 int ide_no_data_taskfile(ide_drive_t *, ide_task_t *);
1228
1229 int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long);
1230
1231 int ide_dev_read_id(ide_drive_t *, u8, u16 *);
1232
1233 extern int ide_driveid_update(ide_drive_t *);
1234 extern int ide_config_drive_speed(ide_drive_t *, u8);
1235 extern u8 eighty_ninty_three (ide_drive_t *);
1236 extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
1237
1238 extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
1239
1240 extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
1241
1242 extern void ide_timer_expiry(unsigned long);
1243 extern irqreturn_t ide_intr(int irq, void *dev_id);
1244 extern void do_ide_request(struct request_queue *);
1245
1246 void ide_init_disk(struct gendisk *, ide_drive_t *);
1247
1248 #ifdef CONFIG_IDEPCI_PCIBUS_ORDER
1249 extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
1250 #define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
1251 #else
1252 #define ide_pci_register_driver(d) pci_register_driver(d)
1253 #endif
1254
1255 static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev)
1256 {
1257         if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5)
1258                 return 1;
1259         return 0;
1260 }
1261
1262 void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *,
1263                          hw_regs_t *, hw_regs_t **);
1264 void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
1265
1266 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
1267 int ide_pci_set_master(struct pci_dev *, const char *);
1268 unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
1269 int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
1270 int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
1271 #else
1272 static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
1273                                      const struct ide_port_info *d)
1274 {
1275         return -EINVAL;
1276 }
1277 #endif
1278
1279 struct ide_pci_enablebit {
1280         u8      reg;    /* byte pci reg holding the enable-bit */
1281         u8      mask;   /* mask to isolate the enable-bit */
1282         u8      val;    /* value of masked reg when "enabled" */
1283 };
1284
1285 enum {
1286         /* Uses ISA control ports not PCI ones. */
1287         IDE_HFLAG_ISA_PORTS             = (1 << 0),
1288         /* single port device */
1289         IDE_HFLAG_SINGLE                = (1 << 1),
1290         /* don't use legacy PIO blacklist */
1291         IDE_HFLAG_PIO_NO_BLACKLIST      = (1 << 2),
1292         /* set for the second port of QD65xx */
1293         IDE_HFLAG_QD_2ND_PORT           = (1 << 3),
1294         /* use PIO8/9 for prefetch off/on */
1295         IDE_HFLAG_ABUSE_PREFETCH        = (1 << 4),
1296         /* use PIO6/7 for fast-devsel off/on */
1297         IDE_HFLAG_ABUSE_FAST_DEVSEL     = (1 << 5),
1298         /* use 100-102 and 200-202 PIO values to set DMA modes */
1299         IDE_HFLAG_ABUSE_DMA_MODES       = (1 << 6),
1300         /*
1301          * keep DMA setting when programming PIO mode, may be used only
1302          * for hosts which have separate PIO and DMA timings (ie. PMAC)
1303          */
1304         IDE_HFLAG_SET_PIO_MODE_KEEP_DMA = (1 << 7),
1305         /* program host for the transfer mode after programming device */
1306         IDE_HFLAG_POST_SET_MODE         = (1 << 8),
1307         /* don't program host/device for the transfer mode ("smart" hosts) */
1308         IDE_HFLAG_NO_SET_MODE           = (1 << 9),
1309         /* trust BIOS for programming chipset/device for DMA */
1310         IDE_HFLAG_TRUST_BIOS_FOR_DMA    = (1 << 10),
1311         /* host is CS5510/CS5520 */
1312         IDE_HFLAG_CS5520                = (1 << 11),
1313         /* ATAPI DMA is unsupported */
1314         IDE_HFLAG_NO_ATAPI_DMA          = (1 << 12),
1315         /* set if host is a "non-bootable" controller */
1316         IDE_HFLAG_NON_BOOTABLE          = (1 << 13),
1317         /* host doesn't support DMA */
1318         IDE_HFLAG_NO_DMA                = (1 << 14),
1319         /* check if host is PCI IDE device before allowing DMA */
1320         IDE_HFLAG_NO_AUTODMA            = (1 << 15),
1321         /* host uses MMIO */
1322         IDE_HFLAG_MMIO                  = (1 << 16),
1323         /* no LBA48 */
1324         IDE_HFLAG_NO_LBA48              = (1 << 17),
1325         /* no LBA48 DMA */
1326         IDE_HFLAG_NO_LBA48_DMA          = (1 << 18),
1327         /* data FIFO is cleared by an error */
1328         IDE_HFLAG_ERROR_STOPS_FIFO      = (1 << 19),
1329         /* serialize ports */
1330         IDE_HFLAG_SERIALIZE             = (1 << 20),
1331         /* host is DTC2278 */
1332         IDE_HFLAG_DTC2278               = (1 << 21),
1333         /* 4 devices on a single set of I/O ports */
1334         IDE_HFLAG_4DRIVES               = (1 << 22),
1335         /* host is TRM290 */
1336         IDE_HFLAG_TRM290                = (1 << 23),
1337         /* use 32-bit I/O ops */
1338         IDE_HFLAG_IO_32BIT              = (1 << 24),
1339         /* unmask IRQs */
1340         IDE_HFLAG_UNMASK_IRQS           = (1 << 25),
1341         IDE_HFLAG_BROKEN_ALTSTATUS      = (1 << 26),
1342         /* serialize ports if DMA is possible (for sl82c105) */
1343         IDE_HFLAG_SERIALIZE_DMA         = (1 << 27),
1344         /* force host out of "simplex" mode */
1345         IDE_HFLAG_CLEAR_SIMPLEX         = (1 << 28),
1346         /* DSC overlap is unsupported */
1347         IDE_HFLAG_NO_DSC                = (1 << 29),
1348         /* never use 32-bit I/O ops */
1349         IDE_HFLAG_NO_IO_32BIT           = (1 << 30),
1350         /* never unmask IRQs */
1351         IDE_HFLAG_NO_UNMASK_IRQS        = (1 << 31),
1352 };
1353
1354 #ifdef CONFIG_BLK_DEV_OFFBOARD
1355 # define IDE_HFLAG_OFF_BOARD    0
1356 #else
1357 # define IDE_HFLAG_OFF_BOARD    IDE_HFLAG_NON_BOOTABLE
1358 #endif
1359
1360 struct ide_port_info {
1361         char                    *name;
1362
1363         int                     (*init_chipset)(struct pci_dev *);
1364
1365         void                    (*get_lock)(irq_handler_t, void *);
1366         void                    (*release_lock)(void);
1367
1368         void                    (*init_iops)(ide_hwif_t *);
1369         void                    (*init_hwif)(ide_hwif_t *);
1370         int                     (*init_dma)(ide_hwif_t *,
1371                                             const struct ide_port_info *);
1372
1373         const struct ide_tp_ops         *tp_ops;
1374         const struct ide_port_ops       *port_ops;
1375         const struct ide_dma_ops        *dma_ops;
1376
1377         struct ide_pci_enablebit        enablebits[2];
1378
1379         hwif_chipset_t          chipset;
1380
1381         u16                     max_sectors;    /* if < than the default one */
1382
1383         u32                     host_flags;
1384
1385         int                     irq_flags;
1386
1387         u8                      pio_mask;
1388         u8                      swdma_mask;
1389         u8                      mwdma_mask;
1390         u8                      udma_mask;
1391 };
1392
1393 int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *);
1394 int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
1395                      const struct ide_port_info *, void *);
1396 void ide_pci_remove(struct pci_dev *);
1397
1398 #ifdef CONFIG_PM
1399 int ide_pci_suspend(struct pci_dev *, pm_message_t);
1400 int ide_pci_resume(struct pci_dev *);
1401 #else
1402 #define ide_pci_suspend NULL
1403 #define ide_pci_resume NULL
1404 #endif
1405
1406 void ide_map_sg(ide_drive_t *, struct request *);
1407 void ide_init_sg_cmd(ide_drive_t *, struct request *);
1408
1409 #define BAD_DMA_DRIVE           0
1410 #define GOOD_DMA_DRIVE          1
1411
1412 struct drive_list_entry {
1413         const char *id_model;
1414         const char *id_firmware;
1415 };
1416
1417 int ide_in_drive_list(u16 *, const struct drive_list_entry *);
1418
1419 #ifdef CONFIG_BLK_DEV_IDEDMA
1420 int ide_dma_good_drive(ide_drive_t *);
1421 int __ide_dma_bad_drive(ide_drive_t *);
1422 int ide_id_dma_bug(ide_drive_t *);
1423
1424 u8 ide_find_dma_mode(ide_drive_t *, u8);
1425
1426 static inline u8 ide_max_dma_mode(ide_drive_t *drive)
1427 {
1428         return ide_find_dma_mode(drive, XFER_UDMA_6);
1429 }
1430
1431 void ide_dma_off_quietly(ide_drive_t *);
1432 void ide_dma_off(ide_drive_t *);
1433 void ide_dma_on(ide_drive_t *);
1434 int ide_set_dma(ide_drive_t *);
1435 void ide_check_dma_crc(ide_drive_t *);
1436 ide_startstop_t ide_dma_intr(ide_drive_t *);
1437
1438 int ide_allocate_dma_engine(ide_hwif_t *);
1439 void ide_release_dma_engine(ide_hwif_t *);
1440
1441 int ide_build_sglist(ide_drive_t *, struct request *);
1442 void ide_destroy_dmatable(ide_drive_t *);
1443
1444 #ifdef CONFIG_BLK_DEV_IDEDMA_SFF
1445 int config_drive_for_dma(ide_drive_t *);
1446 extern int ide_build_dmatable(ide_drive_t *, struct request *);
1447 void ide_dma_host_set(ide_drive_t *, int);
1448 extern int ide_dma_setup(ide_drive_t *);
1449 void ide_dma_exec_cmd(ide_drive_t *, u8);
1450 extern void ide_dma_start(ide_drive_t *);
1451 int ide_dma_end(ide_drive_t *);
1452 int ide_dma_test_irq(ide_drive_t *);
1453 u8 ide_dma_sff_read_status(ide_hwif_t *);
1454 extern const struct ide_dma_ops sff_dma_ops;
1455 #else
1456 static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
1457 #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
1458
1459 void ide_dma_lost_irq(ide_drive_t *);
1460 void ide_dma_timeout(ide_drive_t *);
1461 ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
1462
1463 #else
1464 static inline int ide_id_dma_bug(ide_drive_t *drive) { return 0; }
1465 static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
1466 static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
1467 static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
1468 static inline void ide_dma_off(ide_drive_t *drive) { ; }
1469 static inline void ide_dma_on(ide_drive_t *drive) { ; }
1470 static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
1471 static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
1472 static inline void ide_check_dma_crc(ide_drive_t *drive) { ; }
1473 static inline ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) { return ide_stopped; }
1474 static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; }
1475 #endif /* CONFIG_BLK_DEV_IDEDMA */
1476
1477 #ifdef CONFIG_BLK_DEV_IDEACPI
1478 int ide_acpi_init(void);
1479 extern int ide_acpi_exec_tfs(ide_drive_t *drive);
1480 extern void ide_acpi_get_timing(ide_hwif_t *hwif);
1481 extern void ide_acpi_push_timing(ide_hwif_t *hwif);
1482 void ide_acpi_init_port(ide_hwif_t *);
1483 void ide_acpi_port_init_devices(ide_hwif_t *);
1484 extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
1485 #else
1486 static inline int ide_acpi_init(void) { return 0; }
1487 static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
1488 static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
1489 static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
1490 static inline void ide_acpi_init_port(ide_hwif_t *hwif) { ; }
1491 static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; }
1492 static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
1493 #endif
1494
1495 void ide_register_region(struct gendisk *);
1496 void ide_unregister_region(struct gendisk *);
1497
1498 void ide_undecoded_slave(ide_drive_t *);
1499
1500 void ide_port_apply_params(ide_hwif_t *);
1501 int ide_sysfs_register_port(ide_hwif_t *);
1502
1503 struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **);
1504 void ide_host_free(struct ide_host *);
1505 int ide_host_register(struct ide_host *, const struct ide_port_info *,
1506                       hw_regs_t **);
1507 int ide_host_add(const struct ide_port_info *, hw_regs_t **,
1508                  struct ide_host **);
1509 void ide_host_remove(struct ide_host *);
1510 int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
1511 void ide_port_unregister_devices(ide_hwif_t *);
1512 void ide_port_scan(ide_hwif_t *);
1513
1514 static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
1515 {
1516         return hwif->hwif_data;
1517 }
1518
1519 static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
1520 {
1521         hwif->hwif_data = data;
1522 }
1523
1524 extern void ide_toggle_bounce(ide_drive_t *drive, int on);
1525
1526 u64 ide_get_lba_addr(struct ide_taskfile *, int);
1527 u8 ide_dump_status(ide_drive_t *, const char *, u8);
1528
1529 struct ide_timing {
1530         u8  mode;
1531         u8  setup;      /* t1 */
1532         u16 act8b;      /* t2 for 8-bit io */
1533         u16 rec8b;      /* t2i for 8-bit io */
1534         u16 cyc8b;      /* t0 for 8-bit io */
1535         u16 active;     /* t2 or tD */
1536         u16 recover;    /* t2i or tK */
1537         u16 cycle;      /* t0 */
1538         u16 udma;       /* t2CYCTYP/2 */
1539 };
1540
1541 enum {
1542         IDE_TIMING_SETUP        = (1 << 0),
1543         IDE_TIMING_ACT8B        = (1 << 1),
1544         IDE_TIMING_REC8B        = (1 << 2),
1545         IDE_TIMING_CYC8B        = (1 << 3),
1546         IDE_TIMING_8BIT         = IDE_TIMING_ACT8B | IDE_TIMING_REC8B |
1547                                   IDE_TIMING_CYC8B,
1548         IDE_TIMING_ACTIVE       = (1 << 4),
1549         IDE_TIMING_RECOVER      = (1 << 5),
1550         IDE_TIMING_CYCLE        = (1 << 6),
1551         IDE_TIMING_UDMA         = (1 << 7),
1552         IDE_TIMING_ALL          = IDE_TIMING_SETUP | IDE_TIMING_8BIT |
1553                                   IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER |
1554                                   IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
1555 };
1556
1557 struct ide_timing *ide_timing_find_mode(u8);
1558 u16 ide_pio_cycle_time(ide_drive_t *, u8);
1559 void ide_timing_merge(struct ide_timing *, struct ide_timing *,
1560                       struct ide_timing *, unsigned int);
1561 int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
1562
1563 #ifdef CONFIG_IDE_XFER_MODE
1564 int ide_scan_pio_blacklist(char *);
1565 const char *ide_xfer_verbose(u8);
1566 u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
1567 int ide_set_pio_mode(ide_drive_t *, u8);
1568 int ide_set_dma_mode(ide_drive_t *, u8);
1569 void ide_set_pio(ide_drive_t *, u8);
1570 int ide_set_xfer_rate(ide_drive_t *, u8);
1571 #else
1572 static inline void ide_set_pio(ide_drive_t *drive, u8 pio) { ; }
1573 static inline int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { return -1; }
1574 #endif
1575
1576 static inline void ide_set_max_pio(ide_drive_t *drive)
1577 {
1578         ide_set_pio(drive, 255);
1579 }
1580
1581 char *ide_media_string(ide_drive_t *);
1582
1583 extern struct device_attribute ide_dev_attrs[];
1584 extern struct bus_type ide_bus_type;
1585 extern struct class *ide_port_class;
1586
1587 static inline void ide_dump_identify(u8 *id)
1588 {
1589         print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
1590 }
1591
1592 static inline int hwif_to_node(ide_hwif_t *hwif)
1593 {
1594         return hwif->dev ? dev_to_node(hwif->dev) : -1;
1595 }
1596
1597 static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive)
1598 {
1599         ide_drive_t *peer = drive->hwif->devices[(drive->dn ^ 1) & 1];
1600
1601         return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL;
1602 }
1603
1604 #define ide_port_for_each_dev(i, dev, port) \
1605         for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++)
1606
1607 #define ide_port_for_each_present_dev(i, dev, port) \
1608         for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++) \
1609                 if ((dev)->dev_flags & IDE_DFLAG_PRESENT)
1610
1611 #define ide_host_for_each_port(i, port, host) \
1612         for ((i) = 0; ((port) = (host)->ports[i]) || (i) < MAX_HOST_PORTS; (i)++)
1613
1614 #endif /* _IDE_H */