fs/jbd2/recovery.c

   1 /*
   2  * linux/fs/jbd2/recovery.c
   3  *
   4  * Written by Stephen C. Tweedie <sct@redhat.com>, 1999
   5  *
   6  * Copyright 1999-2000 Red Hat Software --- All Rights Reserved
   7  *
   8  * This file is part of the Linux kernel and is made available under
   9  * the terms of the GNU General Public License, version 2, or at your
  10  * option, any later version, incorporated herein by reference.
  11  *
  12  * Journal recovery routines for the generic filesystem journaling code;
  13  * part of the ext2fs journaling system.
  14  */
  15
  16 #ifndef __KERNEL__
  17 #include "jfs_user.h"
  18 #else
  19 #include <linux/time.h>
  20 #include <linux/fs.h>
  21 #include <linux/jbd2.h>
  22 #include <linux/errno.h>
  23 #include <linux/crc32.h>
  24 #include <linux/blkdev.h>
  25 #endif
  26
  27 /*
  28  * Maintain information about the progress of the recovery job, so that
  29  * the different passes can carry information between them.
  30  */
  31 struct recovery_info
  32 {
  33         tid_t           start_transaction;
  34         tid_t           end_transaction;
  35
  36         int             nr_replays;
  37         int             nr_revokes;
  38         int             nr_revoke_hits;
  39 };
  40
  41 enum passtype {PASS_SCAN, PASS_REVOKE, PASS_REPLAY};
  42 static int do_one_pass(journal_t *journal,
  43                                 struct recovery_info *info, enum passtype pass);
  44 static int scan_revoke_records(journal_t *, struct buffer_head *,
  45                                 tid_t, struct recovery_info *);
  46
  47 #ifdef __KERNEL__
  48
  49 /* Release readahead buffers after use */
  50 static void journal_brelse_array(struct buffer_head *b[], int n)
  51 {
  52         while (--n >= 0)
  53                 brelse (b[n]);
  54 }
  55
  56
  57 /*
  58  * When reading from the journal, we are going through the block device
  59  * layer directly and so there is no readahead being done for us.  We
  60  * need to implement any readahead ourselves if we want it to happen at
  61  * all.  Recovery is basically one long sequential read, so make sure we
  62  * do the IO in reasonably large chunks.
  63  *
  64  * This is not so critical that we need to be enormously clever about
  65  * the readahead size, though.  128K is a purely arbitrary, good-enough
  66  * fixed value.
  67  */
  68
  69 #define MAXBUF 8
  70 static int do_readahead(journal_t *journal, unsigned int start)
  71 {
  72         int err;
  73         unsigned int max, nbufs, next;
  74         unsigned long long blocknr;
  75         struct buffer_head *bh;
  76
  77         struct buffer_head * bufs[MAXBUF];
  78
  79         /* Do up to 128K of readahead */
  80         max = start + (128 * 1024 / journal->j_blocksize);
  81         if (max > journal->j_maxlen)
  82                 max = journal->j_maxlen;
  83
  84         /* Do the readahead itself.  We'll submit MAXBUF buffer_heads at
  85          * a time to the block device IO layer. */
  86
  87         nbufs = 0;
  88
  89         for (next = start; next < max; next++) {
  90                 err = jbd2_journal_bmap(journal, next, &blocknr);
  91
  92                 if (err) {
  93                         printk(KERN_ERR "JBD2: bad block at offset %u\n",
  94                                 next);
  95                         goto failed;
  96                 }
  97
  98                 bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize);
  99                 if (!bh) {
 100                         err = -ENOMEM;
 101                         goto failed;
 102                 }
 103
 104                 if (!buffer_uptodate(bh) && !buffer_locked(bh)) {
 105                         bufs[nbufs++] = bh;
 106                         if (nbufs == MAXBUF) {
 107                                 ll_rw_block(READ, nbufs, bufs);
 108                                 journal_brelse_array(bufs, nbufs);
 109                                 nbufs = 0;
 110                         }
 111                 } else
 112                         brelse(bh);
 113         }
 114
 115         if (nbufs)
 116                 ll_rw_block(READ, nbufs, bufs);
 117         err = 0;
 118
 119 failed:
 120         if (nbufs)
 121                 journal_brelse_array(bufs, nbufs);
 122         return err;
 123 }
 124
 125 #endif /* __KERNEL__ */
 126
 127
 128 /*
 129  * Read a block from the journal
 130  */
 131
 132 static int jread(struct buffer_head **bhp, journal_t *journal,
 133                  unsigned int offset)
 134 {
 135         int err;
 136         unsigned long long blocknr;
 137         struct buffer_head *bh;
 138
 139         *bhp = NULL;
 140
 141         if (offset >= journal->j_maxlen) {
 142                 printk(KERN_ERR "JBD2: corrupted journal superblock\n");
 143                 return -EIO;
 144         }
 145
 146         err = jbd2_journal_bmap(journal, offset, &blocknr);
 147
 148         if (err) {
 149                 printk(KERN_ERR "JBD2: bad block at offset %u\n",
 150                         offset);
 151                 return err;
 152         }
 153
 154         bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize);
 155         if (!bh)
 156                 return -ENOMEM;
 157
 158         if (!buffer_uptodate(bh)) {
 159                 /* If this is a brand new buffer, start readahead.
 160                    Otherwise, we assume we are already reading it.  */
 161                 if (!buffer_req(bh))
 162                         do_readahead(journal, offset);
 163                 wait_on_buffer(bh);
 164         }
 165
 166         if (!buffer_uptodate(bh)) {
 167                 printk(KERN_ERR "JBD2: Failed to read block at offset %u\n",
 168                         offset);
 169                 brelse(bh);
 170                 return -EIO;
 171         }
 172
 173         *bhp = bh;
 174         return 0;
 175 }
 176
 177 static int jbd2_descr_block_csum_verify(journal_t *j,
 178                                         void *buf)
 179 {
 180         struct jbd2_journal_block_tail *tail;
 181         __u32 provided, calculated;
 182
 183         if (!JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V2))
 184                 return 1;
 185
 186         tail = (struct jbd2_journal_block_tail *)(buf + j->j_blocksize -
 187                         sizeof(struct jbd2_journal_block_tail));
 188         provided = tail->t_checksum;
 189         tail->t_checksum = 0;
 190         calculated = jbd2_chksum(j, j->j_csum_seed, buf, j->j_blocksize);
 191         tail->t_checksum = provided;
 192
 193         provided = be32_to_cpu(provided);
 194         return provided == calculated;
 195 }
 196
 197 /*
 198  * Count the number of in-use tags in a journal descriptor block.
 199  */
 200
 201 static int count_tags(journal_t *journal, struct buffer_head *bh)
 202 {
 203         char *                  tagp;
 204         journal_block_tag_t *   tag;
 205         int                     nr = 0, size = journal->j_blocksize;
 206         int                     tag_bytes = journal_tag_bytes(journal);
 207
 208         if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2))
 209                 size -= sizeof(struct jbd2_journal_block_tail);
 210
 211         tagp = &bh->b_data[sizeof(journal_header_t)];
 212
 213         while ((tagp - bh->b_data + tag_bytes) <= size) {
 214                 tag = (journal_block_tag_t *) tagp;
 215
 216                 nr++;
 217                 tagp += tag_bytes;
 218                 if (!(tag->t_flags & cpu_to_be16(JBD2_FLAG_SAME_UUID)))
 219                         tagp += 16;
 220
 221                 if (tag->t_flags & cpu_to_be16(JBD2_FLAG_LAST_TAG))
 222                         break;
 223         }
 224
 225         return nr;
 226 }
 227
 228
 229 /* Make sure we wrap around the log correctly! */
 230 #define wrap(journal, var)                                              \
 231 do {                                                                    \
 232         if (var >= (journal)->j_last)                                   \
 233                 var -= ((journal)->j_last - (journal)->j_first);        \
 234 } while (0)
 235
 236 /**
 237  * jbd2_journal_recover - recovers a on-disk journal
 238  * @journal: the journal to recover
 239  *
 240  * The primary function for recovering the log contents when mounting a
 241  * journaled device.
 242  *
 243  * Recovery is done in three passes.  In the first pass, we look for the
 244  * end of the log.  In the second, we assemble the list of revoke
 245  * blocks.  In the third and final pass, we replay any un-revoked blocks
 246  * in the log.
 247  */
 248 int jbd2_journal_recover(journal_t *journal)
 249 {
 250         int                     err, err2;
 251         journal_superblock_t *  sb;
 252
 253         struct recovery_info    info;
 254
 255         memset(&info, 0, sizeof(info));
 256         sb = journal->j_superblock;
 257
 258         /*
 259          * The journal superblock's s_start field (the current log head)
 260          * is always zero if, and only if, the journal was cleanly
 261          * unmounted.
 262          */
 263
 264         if (!sb->s_start) {
 265                 jbd_debug(1, "No recovery required, last transaction %d\n",
 266                           be32_to_cpu(sb->s_sequence));
 267                 journal->j_transaction_sequence = be32_to_cpu(sb->s_sequence) + 1;
 268                 return 0;
 269         }
 270
 271         err = do_one_pass(journal, &info, PASS_SCAN);
 272         if (!err)
 273                 err = do_one_pass(journal, &info, PASS_REVOKE);
 274         if (!err)
 275                 err = do_one_pass(journal, &info, PASS_REPLAY);
 276
 277         jbd_debug(1, "JBD2: recovery, exit status %d, "
 278                   "recovered transactions %u to %u\n",
 279                   err, info.start_transaction, info.end_transaction);
 280         jbd_debug(1, "JBD2: Replayed %d and revoked %d/%d blocks\n",
 281                   info.nr_replays, info.nr_revoke_hits, info.nr_revokes);
 282
 283         /* Restart the log at the next transaction ID, thus invalidating
 284          * any existing commit records in the log. */
 285         journal->j_transaction_sequence = ++info.end_transaction;
 286
 287         jbd2_journal_clear_revoke(journal);
 288         err2 = sync_blockdev(journal->j_fs_dev);
 289         if (!err)
 290                 err = err2;
 291         /* Make sure all replayed data is on permanent storage */
 292         if (journal->j_flags & JBD2_BARRIER)
 293                 blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL);
 294         return err;
 295 }
 296
 297 /**
 298  * jbd2_journal_skip_recovery - Start journal and wipe exiting records
 299  * @journal: journal to startup
 300  *
 301  * Locate any valid recovery information from the journal and set up the
 302  * journal structures in memory to ignore it (presumably because the
 303  * caller has evidence that it is out of date).
 304  * This function does'nt appear to be exorted..
 305  *
 306  * We perform one pass over the journal to allow us to tell the user how
 307  * much recovery information is being erased, and to let us initialise
 308  * the journal transaction sequence numbers to the next unused ID.
 309  */
 310 int jbd2_journal_skip_recovery(journal_t *journal)
 311 {
 312         int                     err;
 313
 314         struct recovery_info    info;
 315
 316         memset (&info, 0, sizeof(info));
 317
 318         err = do_one_pass(journal, &info, PASS_SCAN);
 319
 320         if (err) {
 321                 printk(KERN_ERR "JBD2: error %d scanning journal\n", err);
 322                 ++journal->j_transaction_sequence;
 323         } else {
 324 #ifdef CONFIG_JBD2_DEBUG
 325                 int dropped = info.end_transaction -
 326                         be32_to_cpu(journal->j_superblock->s_sequence);
 327                 jbd_debug(1,
 328                           "JBD2: ignoring %d transaction%s from the journal.\n",
 329                           dropped, (dropped == 1) ? "" : "s");
 330 #endif
 331                 journal->j_transaction_sequence = ++info.end_transaction;
 332         }
 333
 334         journal->j_tail = 0;
 335         return err;
 336 }
 337
 338 static inline unsigned long long read_tag_block(int tag_bytes, journal_block_tag_t *tag)
 339 {
 340         unsigned long long block = be32_to_cpu(tag->t_blocknr);
 341         if (tag_bytes > JBD2_TAG_SIZE32)
 342                 block |= (u64)be32_to_cpu(tag->t_blocknr_high) << 32;
 343         return block;
 344 }
 345
 346 /*
 347  * calc_chksums calculates the checksums for the blocks described in the
 348  * descriptor block.
 349  */
 350 static int calc_chksums(journal_t *journal, struct buffer_head *bh,
 351                         unsigned long *next_log_block, __u32 *crc32_sum)
 352 {
 353         int i, num_blks, err;
 354         unsigned long io_block;
 355         struct buffer_head *obh;
 356
 357         num_blks = count_tags(journal, bh);
 358         /* Calculate checksum of the descriptor block. */
 359         *crc32_sum = crc32_be(*crc32_sum, (void *)bh->b_data, bh->b_size);
 360
 361         for (i = 0; i < num_blks; i++) {
 362                 io_block = (*next_log_block)++;
 363                 wrap(journal, *next_log_block);
 364                 err = jread(&obh, journal, io_block);
 365                 if (err) {
 366                         printk(KERN_ERR "JBD2: IO error %d recovering block "
 367                                 "%lu in log\n", err, io_block);
 368                         return 1;
 369                 } else {
 370                         *crc32_sum = crc32_be(*crc32_sum, (void *)obh->b_data,
 371                                      obh->b_size);
 372                 }
 373                 put_bh(obh);
 374         }
 375         return 0;
 376 }
 377
 378 static int jbd2_commit_block_csum_verify(journal_t *j, void *buf)
 379 {
 380         struct commit_header *h;
 381         __u32 provided, calculated;
 382
 383         if (!JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V2))
 384                 return 1;
 385
 386         h = buf;
 387         provided = h->h_chksum[0];
 388         h->h_chksum[0] = 0;
 389         calculated = jbd2_chksum(j, j->j_csum_seed, buf, j->j_blocksize);
 390         h->h_chksum[0] = provided;
 391
 392         provided = be32_to_cpu(provided);
 393         return provided == calculated;
 394 }
 395
 396 static int jbd2_block_tag_csum_verify(journal_t *j, journal_block_tag_t *tag,
 397                                       void *buf, __u32 sequence)
 398 {
 399         __u32 provided, calculated;
 400
 401         if (!JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V2))
 402                 return 1;
 403
 404         sequence = cpu_to_be32(sequence);
 405         calculated = jbd2_chksum(j, j->j_csum_seed, (__u8 *)&sequence,
 406                                  sizeof(sequence));
 407         calculated = jbd2_chksum(j, calculated, buf, j->j_blocksize);
 408         provided = be32_to_cpu(tag->t_checksum);
 409
 410         return provided == cpu_to_be32(calculated);
 411 }
 412
 413 static int do_one_pass(journal_t *journal,
 414                         struct recovery_info *info, enum passtype pass)
 415 {
 416         unsigned int            first_commit_ID, next_commit_ID;
 417         unsigned long           next_log_block;
 418         int                     err, success = 0;
 419         journal_superblock_t *  sb;
 420         journal_header_t *      tmp;
 421         struct buffer_head *    bh;
 422         unsigned int            sequence;
 423         int                     blocktype;
 424         int                     tag_bytes = journal_tag_bytes(journal);
 425         __u32                   crc32_sum = ~0; /* Transactional Checksums */
 426         int                     descr_csum_size = 0;
 427
 428         /*
 429          * First thing is to establish what we expect to find in the log
 430          * (in terms of transaction IDs), and where (in terms of log
 431          * block offsets): query the superblock.
 432          */
 433
 434         sb = journal->j_superblock;
 435         next_commit_ID = be32_to_cpu(sb->s_sequence);
 436         next_log_block = be32_to_cpu(sb->s_start);
 437
 438         first_commit_ID = next_commit_ID;
 439         if (pass == PASS_SCAN)
 440                 info->start_transaction = first_commit_ID;
 441
 442         jbd_debug(1, "Starting recovery pass %d\n", pass);
 443
 444         /*
 445          * Now we walk through the log, transaction by transaction,
 446          * making sure that each transaction has a commit block in the
 447          * expected place.  Each complete transaction gets replayed back
 448          * into the main filesystem.
 449          */
 450
 451         while (1) {
 452                 int                     flags;
 453                 char *                  tagp;
 454                 journal_block_tag_t *   tag;
 455                 struct buffer_head *    obh;
 456                 struct buffer_head *    nbh;
 457
 458                 cond_resched();
 459
 460                 /* If we already know where to stop the log traversal,
 461                  * check right now that we haven't gone past the end of
 462                  * the log. */
 463
 464                 if (pass != PASS_SCAN)
 465                         if (tid_geq(next_commit_ID, info->end_transaction))
 466                                 break;
 467
 468                 jbd_debug(2, "Scanning for sequence ID %u at %lu/%lu\n",
 469                           next_commit_ID, next_log_block, journal->j_last);
 470
 471                 /* Skip over each chunk of the transaction looking
 472                  * either the next descriptor block or the final commit
 473                  * record. */
 474
 475                 jbd_debug(3, "JBD2: checking block %ld\n", next_log_block);
 476                 err = jread(&bh, journal, next_log_block);
 477                 if (err)
 478                         goto failed;
 479
 480                 next_log_block++;
 481                 wrap(journal, next_log_block);
 482
 483                 /* What kind of buffer is it?
 484                  *
 485                  * If it is a descriptor block, check that it has the
 486                  * expected sequence number.  Otherwise, we're all done
 487                  * here. */
 488
 489                 tmp = (journal_header_t *)bh->b_data;
 490
 491                 if (tmp->h_magic != cpu_to_be32(JBD2_MAGIC_NUMBER)) {
 492                         brelse(bh);
 493                         break;
 494                 }
 495
 496                 blocktype = be32_to_cpu(tmp->h_blocktype);
 497                 sequence = be32_to_cpu(tmp->h_sequence);
 498                 jbd_debug(3, "Found magic %d, sequence %d\n",
 499                           blocktype, sequence);
 500
 501                 if (sequence != next_commit_ID) {
 502                         brelse(bh);
 503                         break;
 504                 }
 505
 506                 /* OK, we have a valid descriptor block which matches
 507                  * all of the sequence number checks.  What are we going
 508                  * to do with it?  That depends on the pass... */
 509
 510                 switch(blocktype) {
 511                 case JBD2_DESCRIPTOR_BLOCK:
 512                         /* Verify checksum first */
 513                         if (JBD2_HAS_INCOMPAT_FEATURE(journal,
 514                                         JBD2_FEATURE_INCOMPAT_CSUM_V2))
 515                                 descr_csum_size =
 516                                         sizeof(struct jbd2_journal_block_tail);
 517                         if (descr_csum_size > 0 &&
 518                             !jbd2_descr_block_csum_verify(journal,
 519                                                           bh->b_data)) {
 520                                 err = -EIO;
 521                                 goto failed;
 522                         }
 523
 524                         /* If it is a valid descriptor block, replay it
 525                          * in pass REPLAY; if journal_checksums enabled, then
 526                          * calculate checksums in PASS_SCAN, otherwise,
 527                          * just skip over the blocks it describes. */
 528                         if (pass != PASS_REPLAY) {
 529                                 if (pass == PASS_SCAN &&
 530                                     JBD2_HAS_COMPAT_FEATURE(journal,
 531                                             JBD2_FEATURE_COMPAT_CHECKSUM) &&
 532                                     !info->end_transaction) {
 533                                         if (calc_chksums(journal, bh,
 534                                                         &next_log_block,
 535                                                         &crc32_sum)) {
 536                                                 put_bh(bh);
 537                                                 break;
 538                                         }
 539                                         put_bh(bh);
 540                                         continue;
 541                                 }
 542                                 next_log_block += count_tags(journal, bh);
 543                                 wrap(journal, next_log_block);
 544                                 put_bh(bh);
 545                                 continue;
 546                         }
 547
 548                         /* A descriptor block: we can now write all of
 549                          * the data blocks.  Yay, useful work is finally
 550                          * getting done here! */
 551
 552                         tagp = &bh->b_data[sizeof(journal_header_t)];
 553                         while ((tagp - bh->b_data + tag_bytes)
 554                                <= journal->j_blocksize - descr_csum_size) {
 555                                 unsigned long io_block;
 556
 557                                 tag = (journal_block_tag_t *) tagp;
 558                                 flags = be16_to_cpu(tag->t_flags);
 559
 560                                 io_block = next_log_block++;
 561                                 wrap(journal, next_log_block);
 562                                 err = jread(&obh, journal, io_block);
 563                                 if (err) {
 564                                         /* Recover what we can, but
 565                                          * report failure at the end. */
 566                                         success = err;
 567                                         printk(KERN_ERR
 568                                                 "JBD2: IO error %d recovering "
 569                                                 "block %ld in log\n",
 570                                                 err, io_block);
 571                                 } else {
 572                                         unsigned long long blocknr;
 573
 574                                         J_ASSERT(obh != NULL);
 575                                         blocknr = read_tag_block(tag_bytes,
 576                                                                  tag);
 577
 578                                         /* If the block has been
 579                                          * revoked, then we're all done
 580                                          * here. */
 581                                         if (jbd2_journal_test_revoke
 582                                             (journal, blocknr,
 583                                              next_commit_ID)) {
 584                                                 brelse(obh);
 585                                                 ++info->nr_revoke_hits;
 586                                                 goto skip_write;
 587                                         }
 588
 589                                         /* Look for block corruption */
 590                                         if (!jbd2_block_tag_csum_verify(
 591                                                 journal, tag, obh->b_data,
 592                                                 be32_to_cpu(tmp->h_sequence))) {
 593                                                 brelse(obh);
 594                                                 success = -EIO;
 595                                                 printk(KERN_ERR "JBD: Invalid "
 596                                                        "checksum recovering "
 597                                                        "block %llu in log\n",
 598                                                        blocknr);
 599                                                 continue;
 600                                         }
 601
 602                                         /* Find a buffer for the new
 603                                          * data being restored */
 604                                         nbh = __getblk(journal->j_fs_dev,
 605                                                         blocknr,
 606                                                         journal->j_blocksize);
 607                                         if (nbh == NULL) {
 608                                                 printk(KERN_ERR
 609                                                        "JBD2: Out of memory "
 610                                                        "during recovery.\n");
 611                                                 err = -ENOMEM;
 612                                                 brelse(bh);
 613                                                 brelse(obh);
 614                                                 goto failed;
 615                                         }
 616
 617                                         lock_buffer(nbh);
 618                                         memcpy(nbh->b_data, obh->b_data,
 619                                                         journal->j_blocksize);
 620                                         if (flags & JBD2_FLAG_ESCAPE) {
 621                                                 *((__be32 *)nbh->b_data) =
 622                                                 cpu_to_be32(JBD2_MAGIC_NUMBER);
 623                                         }
 624
 625                                         BUFFER_TRACE(nbh, "marking dirty");
 626                                         set_buffer_uptodate(nbh);
 627                                         mark_buffer_dirty(nbh);
 628                                         BUFFER_TRACE(nbh, "marking uptodate");
 629                                         ++info->nr_replays;
 630                                         /* ll_rw_block(WRITE, 1, &nbh); */
 631                                         unlock_buffer(nbh);
 632                                         brelse(obh);
 633                                         brelse(nbh);
 634                                 }
 635
 636                         skip_write:
 637                                 tagp += tag_bytes;
 638                                 if (!(flags & JBD2_FLAG_SAME_UUID))
 639                                         tagp += 16;
 640
 641                                 if (flags & JBD2_FLAG_LAST_TAG)
 642                                         break;
 643                         }
 644
 645                         brelse(bh);
 646                         continue;
 647
 648                 case JBD2_COMMIT_BLOCK:
 649                         /*     How to differentiate between interrupted commit
 650                          *               and journal corruption ?
 651                          *
 652                          * {nth transaction}
 653                          *        Checksum Verification Failed
 654                          *                       |
 655                          *               ____________________
 656                          *              |                    |
 657                          *      async_commit             sync_commit
 658                          *              |                    |
 659                          *              | GO TO NEXT    "Journal Corruption"
 660                          *              | TRANSACTION
 661                          *              |
 662                          * {(n+1)th transanction}
 663                          *              |
 664                          *       _______|______________
 665                          *      |                     |
 666                          * Commit block found   Commit block not found
 667                          *      |                     |
 668                          * "Journal Corruption"       |
 669                          *               _____________|_________
 670                          *              |                       |
 671                          *      nth trans corrupt       OR   nth trans
 672                          *      and (n+1)th interrupted     interrupted
 673                          *      before commit block
 674                          *      could reach the disk.
 675                          *      (Cannot find the difference in above
 676                          *       mentioned conditions. Hence assume
 677                          *       "Interrupted Commit".)
 678                          */
 679
 680                         /* Found an expected commit block: if checksums
 681                          * are present verify them in PASS_SCAN; else not
 682                          * much to do other than move on to the next sequence
 683                          * number. */
 684                         if (pass == PASS_SCAN &&
 685                             JBD2_HAS_COMPAT_FEATURE(journal,
 686                                     JBD2_FEATURE_COMPAT_CHECKSUM)) {
 687                                 int chksum_err, chksum_seen;
 688                                 struct commit_header *cbh =
 689                                         (struct commit_header *)bh->b_data;
 690                                 unsigned found_chksum =
 691                                         be32_to_cpu(cbh->h_chksum[0]);
 692
 693                                 chksum_err = chksum_seen = 0;
 694
 695                                 if (info->end_transaction) {
 696                                         journal->j_failed_commit =
 697                                                 info->end_transaction;
 698                                         brelse(bh);
 699                                         break;
 700                                 }
 701
 702                                 if (crc32_sum == found_chksum &&
 703                                     cbh->h_chksum_type == JBD2_CRC32_CHKSUM &&
 704                                     cbh->h_chksum_size ==
 705                                                 JBD2_CRC32_CHKSUM_SIZE)
 706                                        chksum_seen = 1;
 707                                 else if (!(cbh->h_chksum_type == 0 &&
 708                                              cbh->h_chksum_size == 0 &&
 709                                              found_chksum == 0 &&
 710                                              !chksum_seen))
 711                                 /*
 712                                  * If fs is mounted using an old kernel and then
 713                                  * kernel with journal_chksum is used then we
 714                                  * get a situation where the journal flag has
 715                                  * checksum flag set but checksums are not
 716                                  * present i.e chksum = 0, in the individual
 717                                  * commit blocks.
 718                                  * Hence to avoid checksum failures, in this
 719                                  * situation, this extra check is added.
 720                                  */
 721                                                 chksum_err = 1;
 722
 723                                 if (chksum_err) {
 724                                         info->end_transaction = next_commit_ID;
 725
 726                                         if (!JBD2_HAS_INCOMPAT_FEATURE(journal,
 727                                            JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)){
 728                                                 journal->j_failed_commit =
 729                                                         next_commit_ID;
 730                                                 brelse(bh);
 731                                                 break;
 732                                         }
 733                                 }
 734                                 crc32_sum = ~0;
 735                         }
 736                         if (pass == PASS_SCAN &&
 737                             !jbd2_commit_block_csum_verify(journal,
 738                                                            bh->b_data)) {
 739                                 info->end_transaction = next_commit_ID;
 740
 741                                 if (!JBD2_HAS_INCOMPAT_FEATURE(journal,
 742                                      JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)) {
 743                                         journal->j_failed_commit =
 744                                                 next_commit_ID;
 745                                         brelse(bh);
 746                                         break;
 747                                 }
 748                         }
 749                         brelse(bh);
 750                         next_commit_ID++;
 751                         continue;
 752
 753                 case JBD2_REVOKE_BLOCK:
 754                         /* If we aren't in the REVOKE pass, then we can
 755                          * just skip over this block. */
 756                         if (pass != PASS_REVOKE) {
 757                                 brelse(bh);
 758                                 continue;
 759                         }
 760
 761                         err = scan_revoke_records(journal, bh,
 762                                                   next_commit_ID, info);
 763                         brelse(bh);
 764                         if (err)
 765                                 goto failed;
 766                         continue;
 767
 768                 default:
 769                         jbd_debug(3, "Unrecognised magic %d, end of scan.\n",
 770                                   blocktype);
 771                         brelse(bh);
 772                         goto done;
 773                 }
 774         }
 775
 776  done:
 777         /*
 778          * We broke out of the log scan loop: either we came to the
 779          * known end of the log or we found an unexpected block in the
 780          * log.  If the latter happened, then we know that the "current"
 781          * transaction marks the end of the valid log.
 782          */
 783
 784         if (pass == PASS_SCAN) {
 785                 if (!info->end_transaction)
 786                         info->end_transaction = next_commit_ID;
 787         } else {
 788                 /* It's really bad news if different passes end up at
 789                  * different places (but possible due to IO errors). */
 790                 if (info->end_transaction != next_commit_ID) {
 791                         printk(KERN_ERR "JBD2: recovery pass %d ended at "
 792                                 "transaction %u, expected %u\n",
 793                                 pass, next_commit_ID, info->end_transaction);
 794                         if (!success)
 795                                 success = -EIO;
 796                 }
 797         }
 798
 799         return success;
 800
 801  failed:
 802         return err;
 803 }
 804
 805 static int jbd2_revoke_block_csum_verify(journal_t *j,
 806                                          void *buf)
 807 {
 808         struct jbd2_journal_revoke_tail *tail;
 809         __u32 provided, calculated;
 810
 811         if (!JBD2_HAS_INCOMPAT_FEATURE(j, JBD2_FEATURE_INCOMPAT_CSUM_V2))
 812                 return 1;
 813
 814         tail = (struct jbd2_journal_revoke_tail *)(buf + j->j_blocksize -
 815                         sizeof(struct jbd2_journal_revoke_tail));
 816         provided = tail->r_checksum;
 817         tail->r_checksum = 0;
 818         calculated = jbd2_chksum(j, j->j_csum_seed, buf, j->j_blocksize);
 819         tail->r_checksum = provided;
 820
 821         provided = be32_to_cpu(provided);
 822         return provided == calculated;
 823 }
 824
 825 /* Scan a revoke record, marking all blocks mentioned as revoked. */
 826
 827 static int scan_revoke_records(journal_t *journal, struct buffer_head *bh,
 828                                tid_t sequence, struct recovery_info *info)
 829 {
 830         jbd2_journal_revoke_header_t *header;
 831         int offset, max;
 832         int record_len = 4;
 833
 834         header = (jbd2_journal_revoke_header_t *) bh->b_data;
 835         offset = sizeof(jbd2_journal_revoke_header_t);
 836         max = be32_to_cpu(header->r_count);
 837
 838         if (!jbd2_revoke_block_csum_verify(journal, header))
 839                 return -EINVAL;
 840
 841         if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_64BIT))
 842                 record_len = 8;
 843
 844         while (offset + record_len <= max) {
 845                 unsigned long long blocknr;
 846                 int err;
 847
 848                 if (record_len == 4)
 849                         blocknr = be32_to_cpu(* ((__be32 *) (bh->b_data+offset)));
 850                 else
 851                         blocknr = be64_to_cpu(* ((__be64 *) (bh->b_data+offset)));
 852                 offset += record_len;
 853                 err = jbd2_journal_set_revoke(journal, blocknr, sequence);
 854                 if (err)
 855                         return err;
 856                 ++info->nr_revokes;
 857         }
 858         return 0;
 859 }