Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixes
[pandora-kernel.git] / drivers / watchdog / Kconfig
1 #
2 # Watchdog device configuration
3 #
4
5 menuconfig WATCHDOG
6         bool "Watchdog Timer Support"
7         ---help---
8           If you say Y here (and to one of the following options) and create a
9           character special file /dev/watchdog with major number 10 and minor
10           number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
11           subsequently opening the file and then failing to write to it for
12           longer than 1 minute will result in rebooting the machine. This
13           could be useful for a networked machine that needs to come back
14           on-line as fast as possible after a lock-up. There's both a watchdog
15           implementation entirely in software (which can sometimes fail to
16           reboot the machine) and a driver for hardware watchdog boards, which
17           are more robust and can also keep track of the temperature inside
18           your computer. For details, read
19           <file:Documentation/watchdog/watchdog-api.txt> in the kernel source.
20
21           The watchdog is usually used together with the watchdog daemon
22           which is available from
23           <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
24           also monitor NFS connections and can reboot the machine when the process
25           table is full.
26
27           If unsure, say N.
28
29 if WATCHDOG
30
31 config WATCHDOG_CORE
32         bool "WatchDog Timer Driver Core"
33         ---help---
34           Say Y here if you want to use the new watchdog timer driver core.
35           This driver provides a framework for all watchdog timer drivers
36           and gives them the /dev/watchdog interface (and later also the
37           sysfs interface).
38
39 config WATCHDOG_NOWAYOUT
40         bool "Disable watchdog shutdown on close"
41         help
42           The default watchdog behaviour (which you get if you say N here) is
43           to stop the timer if the process managing it closes the file
44           /dev/watchdog. It's always remotely possible that this process might
45           get killed. If you say Y here, the watchdog cannot be stopped once
46           it has been started.
47
48 #
49 # General Watchdog drivers
50 #
51
52 comment "Watchdog Device Drivers"
53
54 # Architecture Independent
55
56 config SOFT_WATCHDOG
57         tristate "Software watchdog"
58         select WATCHDOG_CORE
59         help
60           A software monitoring watchdog. This will fail to reboot your system
61           from some situations that the hardware watchdog will recover
62           from. Equally it's a lot cheaper to install.
63
64           To compile this driver as a module, choose M here: the
65           module will be called softdog.
66
67 config DA9052_WATCHDOG
68         tristate "Dialog DA9052 Watchdog"
69         depends on PMIC_DA9052
70         select WATCHDOG_CORE
71         help
72           Support for the watchdog in the DA9052 PMIC. Watchdog trigger
73           cause system reset.
74
75           Say Y here to include support for the DA9052 watchdog.
76           Alternatively say M to compile the driver as a module,
77           which will be called da9052_wdt.
78
79 config WM831X_WATCHDOG
80         tristate "WM831x watchdog"
81         depends on MFD_WM831X
82         select WATCHDOG_CORE
83         help
84           Support for the watchdog in the WM831x AudioPlus PMICs.  When
85           the watchdog triggers the system will be reset.
86
87 config WM8350_WATCHDOG
88         tristate "WM8350 watchdog"
89         depends on MFD_WM8350
90         select WATCHDOG_CORE
91         help
92           Support for the watchdog in the WM8350 AudioPlus PMIC.  When
93           the watchdog triggers the system will be reset.
94
95 # ALPHA Architecture
96
97 # ARM Architecture
98
99 config ARM_SP805_WATCHDOG
100         tristate "ARM SP805 Watchdog"
101         depends on ARM_AMBA
102         select WATCHDOG_CORE
103         help
104           ARM Primecell SP805 Watchdog timer. This will reboot your system when
105           the timeout is reached.
106
107 config AT91RM9200_WATCHDOG
108         tristate "AT91RM9200 watchdog"
109         depends on ARCH_AT91RM9200
110         help
111           Watchdog timer embedded into AT91RM9200 chips. This will reboot your
112           system when the timeout is reached.
113
114 config AT91SAM9X_WATCHDOG
115         tristate "AT91SAM9X / AT91CAP9 watchdog"
116         depends on ARCH_AT91 && !ARCH_AT91RM9200
117         help
118           Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
119           reboot your system when the timeout is reached.
120
121 config 21285_WATCHDOG
122         tristate "DC21285 watchdog"
123         depends on FOOTBRIDGE
124         help
125           The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
126           here if you wish to use this. Alternatively say M to compile the
127           driver as a module, which will be called wdt285.
128
129           This driver does not work on all machines. In particular, early CATS
130           boards have hardware problems that will cause the machine to simply
131           lock up if the watchdog fires.
132
133           "If in doubt, leave it out" - say N.
134
135 config 977_WATCHDOG
136         tristate "NetWinder WB83C977 watchdog"
137         depends on FOOTBRIDGE && ARCH_NETWINDER
138         help
139           Say Y here to include support for the WB977 watchdog included in
140           NetWinder machines. Alternatively say M to compile the driver as
141           a module, which will be called wdt977.
142
143           Not sure? It's safe to say N.
144
145 config IXP4XX_WATCHDOG
146         tristate "IXP4xx Watchdog"
147         depends on ARCH_IXP4XX
148         help
149           Say Y here if to include support for the watchdog timer
150           in the Intel IXP4xx network processors. This driver can
151           be built as a module by choosing M. The module will
152           be called ixp4xx_wdt.
153
154           Note: The internal IXP4xx watchdog does a soft CPU reset
155           which doesn't reset any peripherals. There are circumstances
156           where the watchdog will fail to reset the board correctly
157           (e.g., if the boot ROM is in an unreadable state).
158
159           Say N if you are unsure.
160
161 config KS8695_WATCHDOG
162         tristate "KS8695 watchdog"
163         depends on ARCH_KS8695
164         help
165           Watchdog timer embedded into KS8695 processor. This will reboot your
166           system when the timeout is reached.
167
168 config HAVE_S3C2410_WATCHDOG
169         bool
170         help
171           This will include watchdog timer support for Samsung SoCs. If
172           you want to include watchdog support for any machine, kindly
173           select this in the respective mach-XXXX/Kconfig file.
174
175 config S3C2410_WATCHDOG
176         tristate "S3C2410 Watchdog"
177         depends on HAVE_S3C2410_WATCHDOG
178         select WATCHDOG_CORE
179         help
180           Watchdog timer block in the Samsung SoCs. This will reboot
181           the system when the timer expires with the watchdog enabled.
182
183           The driver is limited by the speed of the system's PCLK
184           signal, so with reasonably fast systems (PCLK around 50-66MHz)
185           then watchdog intervals of over approximately 20seconds are
186           unavailable.
187
188           The driver can be built as a module by choosing M, and will
189           be called s3c2410_wdt
190
191 config SA1100_WATCHDOG
192         tristate "SA1100/PXA2xx watchdog"
193         depends on ARCH_SA1100 || ARCH_PXA
194         help
195           Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
196           reboot your system when timeout is reached.
197
198           NOTE: once enabled, this timer cannot be disabled.
199
200           To compile this driver as a module, choose M here: the
201           module will be called sa1100_wdt.
202
203 config DW_WATCHDOG
204         tristate "Synopsys DesignWare watchdog"
205         depends on ARM && HAVE_CLK
206         help
207           Say Y here if to include support for the Synopsys DesignWare
208           watchdog timer found in many ARM chips.
209           To compile this driver as a module, choose M here: the
210           module will be called dw_wdt.
211
212 config MPCORE_WATCHDOG
213         tristate "MPcore watchdog"
214         depends on HAVE_ARM_TWD
215         help
216           Watchdog timer embedded into the MPcore system.
217
218           To compile this driver as a module, choose M here: the
219           module will be called mpcore_wdt.
220
221 config EP93XX_WATCHDOG
222         tristate "EP93xx Watchdog"
223         depends on ARCH_EP93XX
224         select WATCHDOG_CORE
225         help
226           Say Y here if to include support for the watchdog timer
227           embedded in the Cirrus Logic EP93xx family of devices.
228
229           To compile this driver as a module, choose M here: the
230           module will be called ep93xx_wdt.
231
232 config OMAP_WATCHDOG
233         tristate "OMAP Watchdog"
234         depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
235         help
236           Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog.  Say 'Y'
237           here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
238
239 config PNX4008_WATCHDOG
240         tristate "PNX4008 and LPC32XX Watchdog"
241         depends on ARCH_PNX4008 || ARCH_LPC32XX
242         select WATCHDOG_CORE
243         help
244           Say Y here if to include support for the watchdog timer
245           in the PNX4008 or LPC32XX processor.
246           This driver can be built as a module by choosing M. The module
247           will be called pnx4008_wdt.
248
249           Say N if you are unsure.
250
251 config IOP_WATCHDOG
252         tristate "IOP Watchdog"
253         depends on PLAT_IOP
254         select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X)
255         help
256           Say Y here if to include support for the watchdog timer
257           in the Intel IOP3XX & IOP13XX I/O Processors.  This driver can
258           be built as a module by choosing M. The module will
259           be called iop_wdt.
260
261           Note: The IOP13XX watchdog does an Internal Bus Reset which will
262           affect both cores and the peripherals of the IOP.  The ATU-X
263           and/or ATUe configuration registers will remain intact, but if
264           operating as an Root Complex and/or Central Resource, the PCI-X
265           and/or PCIe busses will also be reset.  THIS IS A VERY BIG HAMMER.
266
267 config DAVINCI_WATCHDOG
268         tristate "DaVinci watchdog"
269         depends on ARCH_DAVINCI
270         help
271           Say Y here if to include support for the watchdog timer
272           in the DaVinci DM644x/DM646x processors.
273           To compile this driver as a module, choose M here: the
274           module will be called davinci_wdt.
275
276           NOTE: once enabled, this timer cannot be disabled.
277           Say N if you are unsure.
278
279 config ORION_WATCHDOG
280         tristate "Orion watchdog"
281         depends on ARCH_ORION5X || ARCH_KIRKWOOD
282         select WATCHDOG_CORE
283         help
284           Say Y here if to include support for the watchdog timer
285           in the Marvell Orion5x and Kirkwood ARM SoCs.
286           To compile this driver as a module, choose M here: the
287           module will be called orion_wdt.
288
289 config COH901327_WATCHDOG
290         bool "ST-Ericsson COH 901 327 watchdog"
291         depends on ARCH_U300
292         default y if MACH_U300
293         select WATCHDOG_CORE
294         help
295           Say Y here to include Watchdog timer support for the
296           watchdog embedded into the ST-Ericsson U300 series platforms.
297           This watchdog is used to reset the system and thus cannot be
298           compiled as a module.
299
300 config TWL4030_WATCHDOG
301         tristate "TWL4030 Watchdog"
302         depends on TWL4030_CORE
303         help
304           Support for TI TWL4030 watchdog.  Say 'Y' here to enable the
305           watchdog timer support for TWL4030 chips.
306
307 config STMP3XXX_WATCHDOG
308         tristate "Freescale STMP3XXX watchdog"
309         depends on ARCH_STMP3XXX
310         help
311           Say Y here if to include support for the watchdog timer
312           for the Sigmatel STMP37XX/378X SoC.
313           To compile this driver as a module, choose M here: the
314           module will be called stmp3xxx_wdt.
315
316 config NUC900_WATCHDOG
317         tristate "Nuvoton NUC900 watchdog"
318         depends on ARCH_W90X900
319         help
320           Say Y here if to include support for the watchdog timer
321           for the Nuvoton NUC900 series SoCs.
322           To compile this driver as a module, choose M here: the
323           module will be called nuc900_wdt.
324
325 config TS72XX_WATCHDOG
326         tristate "TS-72XX SBC Watchdog"
327         depends on MACH_TS72XX
328         help
329           Technologic Systems TS-7200, TS-7250 and TS-7260 boards have
330           watchdog timer implemented in a external CPLD chip. Say Y here
331           if you want to support for the watchdog timer on TS-72XX boards.
332
333           To compile this driver as a module, choose M here: the
334           module will be called ts72xx_wdt.
335
336 config MAX63XX_WATCHDOG
337         tristate "Max63xx watchdog"
338         depends on ARM && HAS_IOMEM
339         select WATCHDOG_CORE
340         help
341           Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
342
343 config IMX2_WDT
344         tristate "IMX2+ Watchdog"
345         depends on IMX_HAVE_PLATFORM_IMX2_WDT
346         help
347           This is the driver for the hardware watchdog
348           on the Freescale IMX2 and later processors.
349           If you have one of these processors and wish to have
350           watchdog support enabled, say Y, otherwise say N.
351
352           To compile this driver as a module, choose M here: the
353           module will be called imx2_wdt.
354
355 # AVR32 Architecture
356
357 config AT32AP700X_WDT
358         tristate "AT32AP700x watchdog"
359         depends on CPU_AT32AP700X
360         help
361           Watchdog timer embedded into AT32AP700x devices. This will reboot
362           your system when the timeout is reached.
363
364 # BLACKFIN Architecture
365
366 config BFIN_WDT
367         tristate "Blackfin On-Chip Watchdog Timer"
368         depends on BLACKFIN
369         ---help---
370           If you say yes here you will get support for the Blackfin On-Chip
371           Watchdog Timer. If you have one of these processors and wish to
372           have watchdog support enabled, say Y, otherwise say N.
373
374           To compile this driver as a module, choose M here: the
375           module will be called bfin_wdt.
376
377 # CRIS Architecture
378
379 # FRV Architecture
380
381 # H8300 Architecture
382
383 # X86 (i386 + ia64 + x86_64) Architecture
384
385 config ACQUIRE_WDT
386         tristate "Acquire SBC Watchdog Timer"
387         depends on X86
388         ---help---
389           This is the driver for the hardware watchdog on Single Board
390           Computers produced by Acquire Inc (and others). This watchdog
391           simply watches your kernel to make sure it doesn't freeze, and if
392           it does, it reboots your computer after a certain amount of time.
393
394           To compile this driver as a module, choose M here: the
395           module will be called acquirewdt.
396
397           Most people will say N.
398
399 config ADVANTECH_WDT
400         tristate "Advantech SBC Watchdog Timer"
401         depends on X86
402         help
403           If you are configuring a Linux kernel for the Advantech single-board
404           computer, say `Y' here to support its built-in watchdog timer
405           feature. More information can be found at
406           <http://www.advantech.com.tw/products/>
407
408 config ALIM1535_WDT
409         tristate "ALi M1535 PMU Watchdog Timer"
410         depends on X86 && PCI
411         ---help---
412           This is the driver for the hardware watchdog on the ALi M1535 PMU.
413
414           To compile this driver as a module, choose M here: the
415           module will be called alim1535_wdt.
416
417           Most people will say N.
418
419 config ALIM7101_WDT
420         tristate "ALi M7101 PMU Computer Watchdog"
421         depends on PCI
422         help
423           This is the driver for the hardware watchdog on the ALi M7101 PMU
424           as used in the x86 Cobalt servers and also found in some
425           SPARC Netra servers too.
426
427           To compile this driver as a module, choose M here: the
428           module will be called alim7101_wdt.
429
430           Most people will say N.
431
432 config F71808E_WDT
433         tristate "Fintek F71808E, F71862FG, F71869, F71882FG and F71889FG Watchdog"
434         depends on X86 && EXPERIMENTAL
435         help
436           This is the driver for the hardware watchdog on the Fintek
437           F71808E, F71862FG, F71869, F71882FG and F71889FG Super I/O controllers.
438
439           You can compile this driver directly into the kernel, or use
440           it as a module.  The module will be called f71808e_wdt.
441
442 config SP5100_TCO
443         tristate "AMD/ATI SP5100 TCO Timer/Watchdog"
444         depends on X86 && PCI
445         ---help---
446           Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO
447           (Total Cost of Ownership) timer is a watchdog timer that will reboot
448           the machine after its expiration. The expiration time can be
449           configured with the "heartbeat" parameter.
450
451           To compile this driver as a module, choose M here: the
452           module will be called sp5100_tco.
453
454 config GEODE_WDT
455         tristate "AMD Geode CS5535/CS5536 Watchdog"
456         depends on CS5535_MFGPT
457         help
458           This driver enables a watchdog capability built into the
459           CS5535/CS5536 companion chips for the AMD Geode GX and LX
460           processors.  This watchdog watches your kernel to make sure
461           it doesn't freeze, and if it does, it reboots your computer after
462           a certain amount of time.
463
464           You can compile this driver directly into the kernel, or use
465           it as a module.  The module will be called geodewdt.
466
467 config SC520_WDT
468         tristate "AMD Elan SC520 processor Watchdog"
469         depends on X86
470         help
471           This is the driver for the hardware watchdog built in to the
472           AMD "Elan" SC520 microcomputer commonly used in embedded systems.
473           This watchdog simply watches your kernel to make sure it doesn't
474           freeze, and if it does, it reboots your computer after a certain
475           amount of time.
476
477           You can compile this driver directly into the kernel, or use
478           it as a module.  The module will be called sc520_wdt.
479
480 config SBC_FITPC2_WATCHDOG
481         tristate "Compulab SBC-FITPC2 watchdog"
482         depends on X86
483         ---help---
484           This is the driver for the built-in watchdog timer on the fit-PC2,
485           fit-PC2i, CM-iAM single-board computers made by Compulab.
486
487           It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
488           When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
489
490           Entering BIOS setup temporary disables watchdog operation regardless to current state,
491           so system will not be restarted while user in BIOS setup.
492
493           Once watchdog was enabled the system will be restarted every
494           "Watchdog Timer Value" period, so to prevent it user can restart or
495           disable the watchdog.
496
497           To compile this driver as a module, choose M here: the
498           module will be called sbc_fitpc2_wdt.
499
500           Most people will say N.
501
502 config EUROTECH_WDT
503         tristate "Eurotech CPU-1220/1410 Watchdog Timer"
504         depends on X86
505         help
506           Enable support for the watchdog timer on the Eurotech CPU-1220 and
507           CPU-1410 cards.  These are PC/104 SBCs. Spec sheets and product
508           information are at <http://www.eurotech.it/>.
509
510 config IB700_WDT
511         tristate "IB700 SBC Watchdog Timer"
512         depends on X86
513         ---help---
514           This is the driver for the hardware watchdog on the IB700 Single
515           Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
516           simply watches your kernel to make sure it doesn't freeze, and if
517           it does, it reboots your computer after a certain amount of time.
518
519           This driver is like the WDT501 driver but for slightly different hardware.
520
521           To compile this driver as a module, choose M here: the
522           module will be called ib700wdt.
523
524           Most people will say N.
525
526 config IBMASR
527         tristate "IBM Automatic Server Restart"
528         depends on X86
529         help
530           This is the driver for the IBM Automatic Server Restart watchdog
531           timer built-in into some eServer xSeries machines.
532
533           To compile this driver as a module, choose M here: the
534           module will be called ibmasr.
535
536 config WAFER_WDT
537         tristate "ICP Single Board Computer Watchdog Timer"
538         depends on X86
539         help
540           This is a driver for the hardware watchdog on the ICP Single
541           Board Computer. This driver is working on (at least) the following
542           IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782.
543
544           To compile this driver as a module, choose M here: the
545           module will be called wafer5823wdt.
546
547 config I6300ESB_WDT
548         tristate "Intel 6300ESB Timer/Watchdog"
549         depends on PCI
550         ---help---
551           Hardware driver for the watchdog timer built into the Intel
552           6300ESB controller hub.
553
554           To compile this driver as a module, choose M here: the
555           module will be called i6300esb.
556
557 config IE6XX_WDT
558         tristate "Intel Atom E6xx Watchdog"
559         depends on X86 && PCI
560         select WATCHDOG_CORE
561         select MFD_CORE
562         select LPC_SCH
563         ---help---
564           Hardware driver for the watchdog timer built into the Intel
565           Atom E6XX (TunnelCreek) processor.
566
567           To compile this driver as a module, choose M here: the
568           module will be called ie6xx_wdt.
569
570 config INTEL_SCU_WATCHDOG
571         bool "Intel SCU Watchdog for Mobile Platforms"
572         depends on X86_MRST
573         ---help---
574           Hardware driver for the watchdog time built into the Intel SCU
575           for Intel Mobile Platforms.
576
577           To compile this driver as a module, choose M here.
578
579 config ITCO_WDT
580         tristate "Intel TCO Timer/Watchdog"
581         depends on (X86 || IA64) && PCI
582         select WATCHDOG_CORE
583         select LPC_ICH
584         ---help---
585           Hardware driver for the intel TCO timer based watchdog devices.
586           These drivers are included in the Intel 82801 I/O Controller
587           Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
588           controller hub.
589
590           The TCO (Total Cost of Ownership) timer is a watchdog timer
591           that will reboot the machine after its second expiration. The
592           expiration time can be configured with the "heartbeat" parameter.
593
594           On some motherboards the driver may fail to reset the chipset's
595           NO_REBOOT flag which prevents the watchdog from rebooting the
596           machine. If this is the case you will get a kernel message like
597           "failed to reset NO_REBOOT flag, reboot disabled by hardware".
598
599           To compile this driver as a module, choose M here: the
600           module will be called iTCO_wdt.
601
602 config ITCO_VENDOR_SUPPORT
603         bool "Intel TCO Timer/Watchdog Specific Vendor Support"
604         depends on ITCO_WDT
605         ---help---
606           Add vendor specific support to the intel TCO timer based watchdog
607           devices. At this moment we only have additional support for some
608           SuperMicro Inc. motherboards.
609
610 config IT8712F_WDT
611         tristate "IT8712F (Smart Guardian) Watchdog Timer"
612         depends on X86
613         ---help---
614           This is the driver for the built-in watchdog timer on the IT8712F
615           Super I/0 chipset used on many motherboards.
616
617           If the driver does not work, then make sure that the game port in
618           the BIOS is enabled.
619
620           To compile this driver as a module, choose M here: the
621           module will be called it8712f_wdt.
622
623 config IT87_WDT
624         tristate "IT87 Watchdog Timer"
625         depends on X86 && EXPERIMENTAL
626         ---help---
627           This is the driver for the hardware watchdog on the ITE IT8702,
628           IT8712, IT8716, IT8718, IT8720, IT8721, IT8726 and IT8728
629           Super I/O chips.
630
631           If the driver does not work, then make sure that the game port in
632           the BIOS is enabled.
633
634           This watchdog simply watches your kernel to make sure it doesn't
635           freeze, and if it does, it reboots your computer after a certain
636           amount of time.
637
638           To compile this driver as a module, choose M here: the module will
639           be called it87_wdt.
640
641 config HP_WATCHDOG
642         tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
643         depends on X86 && PCI
644         help
645           A software monitoring watchdog and NMI sourcing driver. This driver
646           will detect lockups and provide a stack trace. This is a driver that
647           will only load on an HP ProLiant system with a minimum of iLO2 support.
648           To compile this driver as a module, choose M here: the module will be
649           called hpwdt.
650
651 config HPWDT_NMI_DECODING
652         bool "NMI decoding support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
653         depends on HP_WATCHDOG
654         default y
655         help
656           When an NMI occurs this feature will make the necessary BIOS calls to
657           log the cause of the NMI.
658
659 config SC1200_WDT
660         tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
661         depends on X86
662         help
663           This is a driver for National Semiconductor PC87307/PC97307 hardware
664           watchdog cards as found on the SC1200. This watchdog is mainly used
665           for power management purposes and can be used to power down the device
666           during inactivity periods (includes interrupt activity monitoring).
667
668           To compile this driver as a module, choose M here: the
669           module will be called sc1200wdt.
670
671           Most people will say N.
672
673 config SCx200_WDT
674         tristate "National Semiconductor SCx200 Watchdog"
675         depends on SCx200 && PCI
676         help
677           Enable the built-in watchdog timer support on the National
678           Semiconductor SCx200 processors.
679
680           If compiled as a module, it will be called scx200_wdt.
681
682 config PC87413_WDT
683         tristate "NS PC87413 watchdog"
684         depends on X86
685         ---help---
686           This is the driver for the hardware watchdog on the PC87413 chipset
687           This watchdog simply watches your kernel to make sure it doesn't
688           freeze, and if it does, it reboots your computer after a certain
689           amount of time.
690
691           To compile this driver as a module, choose M here: the
692           module will be called pc87413_wdt.
693
694           Most people will say N.
695
696 config NV_TCO
697         tristate "nVidia TCO Timer/Watchdog"
698         depends on X86 && PCI
699         ---help---
700           Hardware driver for the TCO timer built into the nVidia Hub family
701           (such as the MCP51).  The TCO (Total Cost of Ownership) timer is a
702           watchdog timer that will reboot the machine after its second
703           expiration. The expiration time can be configured with the
704           "heartbeat" parameter.
705
706           On some motherboards the driver may fail to reset the chipset's
707           NO_REBOOT flag which prevents the watchdog from rebooting the
708           machine. If this is the case you will get a kernel message like
709           "failed to reset NO_REBOOT flag, reboot disabled by hardware".
710
711           To compile this driver as a module, choose M here: the
712           module will be called nv_tco.
713
714 config RDC321X_WDT
715         tristate "RDC R-321x SoC watchdog"
716         depends on X86_RDC321X
717         help
718           This is the driver for the built in hardware watchdog
719           in the RDC R-321x SoC.
720
721           To compile this driver as a module, choose M here: the
722           module will be called rdc321x_wdt.
723
724 config 60XX_WDT
725         tristate "SBC-60XX Watchdog Timer"
726         depends on X86
727         help
728           This driver can be used with the watchdog timer found on some
729           single board computers, namely the 6010 PII based computer.
730           It may well work with other cards.  It reads port 0x443 to enable
731           and re-set the watchdog timer, and reads port 0x45 to disable
732           the watchdog.  If you have a card that behave in similar ways,
733           you can probably make this driver work with your card as well.
734
735           You can compile this driver directly into the kernel, or use
736           it as a module.  The module will be called sbc60xxwdt.
737
738 config SBC8360_WDT
739         tristate "SBC8360 Watchdog Timer"
740         depends on X86
741         ---help---
742
743           This is the driver for the hardware watchdog on the SBC8360 Single
744           Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
745
746           To compile this driver as a module, choose M here: the
747           module will be called sbc8360.
748
749           Most people will say N.
750
751 config SBC7240_WDT
752         tristate "SBC Nano 7240 Watchdog Timer"
753         depends on X86_32 && !UML
754         ---help---
755           This is the driver for the hardware watchdog found on the IEI
756           single board computers EPIC Nano 7240 (and likely others). This
757           watchdog simply watches your kernel to make sure it doesn't freeze,
758           and if it does, it reboots your computer after a certain amount of
759           time.
760
761           To compile this driver as a module, choose M here: the
762           module will be called sbc7240_wdt.
763
764 config CPU5_WDT
765         tristate "SMA CPU5 Watchdog"
766         depends on X86
767         ---help---
768           TBD.
769           To compile this driver as a module, choose M here: the
770           module will be called cpu5wdt.
771
772 config SMSC_SCH311X_WDT
773         tristate "SMSC SCH311X Watchdog Timer"
774         depends on X86
775         ---help---
776           This is the driver for the hardware watchdog timer on the
777           SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
778           (LPC IO with 8042 KBC, Reset Generation, HWM and multiple
779           serial ports).
780
781           To compile this driver as a module, choose M here: the
782           module will be called sch311x_wdt.
783
784 config SMSC37B787_WDT
785         tristate "Winbond SMsC37B787 Watchdog Timer"
786         depends on X86
787         ---help---
788           This is the driver for the hardware watchdog component on the
789           Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
790           from Vision Systems and maybe others.
791
792           This watchdog simply watches your kernel to make sure it doesn't
793           freeze, and if it does, it reboots your computer after a certain
794           amount of time.
795
796           Usually a userspace daemon will notify the kernel WDT driver that
797           userspace is still alive, at regular intervals.
798
799           To compile this driver as a module, choose M here: the
800           module will be called smsc37b787_wdt.
801
802           Most people will say N.
803
804 config VIA_WDT
805         tristate "VIA Watchdog Timer"
806         depends on X86 && PCI
807         select WATCHDOG_CORE
808         ---help---
809         This is the driver for the hardware watchdog timer on VIA
810         southbridge chipset CX700, VX800/VX820 or VX855/VX875.
811
812         To compile this driver as a module, choose M here; the module
813         will be called via_wdt.
814
815         Most people will say N.
816
817 config W83627HF_WDT
818         tristate "W83627HF/W83627DHG Watchdog Timer"
819         depends on X86
820         ---help---
821           This is the driver for the hardware watchdog on the W83627HF chipset
822           as used in Advantech PC-9578 and Tyan S2721-533 motherboards
823           (and likely others). The driver also supports the W83627DHG chip.
824           This watchdog simply watches your kernel to make sure it doesn't
825           freeze, and if it does, it reboots your computer after a certain
826           amount of time.
827
828           To compile this driver as a module, choose M here: the
829           module will be called w83627hf_wdt.
830
831           Most people will say N.
832
833 config W83697HF_WDT
834         tristate "W83697HF/W83697HG Watchdog Timer"
835         depends on X86
836         ---help---
837           This is the driver for the hardware watchdog on the W83697HF/HG
838           chipset as used in Dedibox/VIA motherboards (and likely others).
839           This watchdog simply watches your kernel to make sure it doesn't
840           freeze, and if it does, it reboots your computer after a certain
841           amount of time.
842
843           To compile this driver as a module, choose M here: the
844           module will be called w83697hf_wdt.
845
846           Most people will say N.
847
848 config W83697UG_WDT
849         tristate "W83697UG/W83697UF Watchdog Timer"
850         depends on X86
851         ---help---
852           This is the driver for the hardware watchdog on the W83697UG/UF
853           chipset as used in MSI Fuzzy CX700 VIA motherboards (and likely others).
854           This watchdog simply watches your kernel to make sure it doesn't
855           freeze, and if it does, it reboots your computer after a certain
856           amount of time.
857
858           To compile this driver as a module, choose M here: the
859           module will be called w83697ug_wdt.
860
861           Most people will say N.
862
863 config W83877F_WDT
864         tristate "W83877F (EMACS) Watchdog Timer"
865         depends on X86
866         ---help---
867           This is the driver for the hardware watchdog on the W83877F chipset
868           as used in EMACS PC-104 motherboards (and likely others).  This
869           watchdog simply watches your kernel to make sure it doesn't freeze,
870           and if it does, it reboots your computer after a certain amount of
871           time.
872
873           To compile this driver as a module, choose M here: the
874           module will be called w83877f_wdt.
875
876           Most people will say N.
877
878 config W83977F_WDT
879         tristate "W83977F (PCM-5335) Watchdog Timer"
880         depends on X86
881         ---help---
882           This is the driver for the hardware watchdog on the W83977F I/O chip
883           as used in AAEON's PCM-5335 SBC (and likely others).  This
884           watchdog simply watches your kernel to make sure it doesn't freeze,
885           and if it does, it reboots your computer after a certain amount of
886           time.
887
888           To compile this driver as a module, choose M here: the
889           module will be called w83977f_wdt.
890
891 config MACHZ_WDT
892         tristate "ZF MachZ Watchdog"
893         depends on X86
894         ---help---
895           If you are using a ZF Micro MachZ processor, say Y here, otherwise
896           N.  This is the driver for the watchdog timer built-in on that
897           processor using ZF-Logic interface.  This watchdog simply watches
898           your kernel to make sure it doesn't freeze, and if it does, it
899           reboots your computer after a certain amount of time.
900
901           To compile this driver as a module, choose M here: the
902           module will be called machzwd.
903
904 config SBC_EPX_C3_WATCHDOG
905         tristate "Winsystems SBC EPX-C3 watchdog"
906         depends on X86
907         ---help---
908           This is the driver for the built-in watchdog timer on the EPX-C3
909           Single-board computer made by Winsystems, Inc.
910
911           *Note*: This hardware watchdog is not probeable and thus there
912           is no way to know if writing to its IO address will corrupt
913           your system or have any real effect.  The only way to be sure
914           that this driver does what you want is to make sure you
915           are running it on an EPX-C3 from Winsystems with the watchdog
916           timer at IO address 0x1ee and 0x1ef.  It will write to both those
917           IO ports.  Basically, the assumption is made that if you compile
918           this driver into your kernel and/or load it as a module, that you
919           know what you are doing and that you are in fact running on an
920           EPX-C3 board!
921
922           To compile this driver as a module, choose M here: the
923           module will be called sbc_epx_c3.
924
925 # M32R Architecture
926
927 # M68K Architecture
928
929 config M54xx_WATCHDOG
930         tristate "MCF54xx watchdog support"
931         depends on M548x
932         help
933           To compile this driver as a module, choose M here: the
934           module will be called m54xx_wdt.
935
936 # MicroBlaze Architecture
937
938 config XILINX_WATCHDOG
939         tristate "Xilinx Watchdog timer"
940         depends on MICROBLAZE
941         ---help---
942           Watchdog driver for the xps_timebase_wdt ip core.
943
944           IMPORTANT: The xps_timebase_wdt parent must have the property
945           "clock-frequency" at device tree.
946
947           To compile this driver as a module, choose M here: the
948           module will be called of_xilinx_wdt.
949
950 # MIPS Architecture
951
952 config ATH79_WDT
953         tristate "Atheros AR71XX/AR724X/AR913X hardware watchdog"
954         depends on ATH79
955         help
956           Hardware driver for the built-in watchdog timer on the Atheros
957           AR71XX/AR724X/AR913X SoCs.
958
959 config BCM47XX_WDT
960         tristate "Broadcom BCM47xx Watchdog Timer"
961         depends on BCM47XX
962         help
963           Hardware driver for the Broadcom BCM47xx Watchdog Timer.
964
965 config RC32434_WDT
966         tristate "IDT RC32434 SoC Watchdog Timer"
967         depends on MIKROTIK_RB532
968         help
969           Hardware driver for the IDT RC32434 SoC built-in
970           watchdog timer.
971
972           To compile this driver as a module, choose M here: the
973           module will be called rc32434_wdt.
974
975 config INDYDOG
976         tristate "Indy/I2 Hardware Watchdog"
977         depends on SGI_HAS_INDYDOG
978         help
979           Hardware driver for the Indy's/I2's watchdog. This is a
980           watchdog timer that will reboot the machine after a 60 second
981           timer expired and no process has written to /dev/watchdog during
982           that time.
983
984 config JZ4740_WDT
985         tristate "Ingenic jz4740 SoC hardware watchdog"
986         depends on MACH_JZ4740
987         select WATCHDOG_CORE
988         help
989           Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs.
990
991 config WDT_MTX1
992         tristate "MTX-1 Hardware Watchdog"
993         depends on MIPS_MTX1
994         help
995           Hardware driver for the MTX-1 boards. This is a watchdog timer that
996           will reboot the machine after a 100 seconds timer expired.
997
998 config PNX833X_WDT
999         tristate "PNX833x Hardware Watchdog"
1000         depends on SOC_PNX8335
1001         help
1002           Hardware driver for the PNX833x's watchdog. This is a
1003           watchdog timer that will reboot the machine after a programmable
1004           timer has expired and no process has written to /dev/watchdog during
1005           that time.
1006
1007 config SIBYTE_WDOG
1008         tristate "Sibyte SoC hardware watchdog"
1009         depends on CPU_SB1
1010         help
1011           Watchdog driver for the built in watchdog hardware in Sibyte
1012           SoC processors.  There are apparently two watchdog timers
1013           on such processors; this driver supports only the first one,
1014           because currently Linux only supports exporting one watchdog
1015           to userspace.
1016
1017           To compile this driver as a loadable module, choose M here.
1018           The module will be called sb_wdog.
1019
1020 config AR7_WDT
1021         tristate "TI AR7 Watchdog Timer"
1022         depends on AR7
1023         help
1024           Hardware driver for the TI AR7 Watchdog Timer.
1025
1026 config TXX9_WDT
1027         tristate "Toshiba TXx9 Watchdog Timer"
1028         depends on CPU_TX39XX || CPU_TX49XX
1029         select WATCHDOG_CORE
1030         help
1031           Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
1032
1033 config OCTEON_WDT
1034         tristate "Cavium OCTEON SOC family Watchdog Timer"
1035         depends on CPU_CAVIUM_OCTEON
1036         default y
1037         select EXPORT_UASM if OCTEON_WDT = m
1038         help
1039           Hardware driver for OCTEON's on chip watchdog timer.
1040           Enables the watchdog for all cores running Linux. It
1041           installs a NMI handler and pokes the watchdog based on an
1042           interrupt.  On first expiration of the watchdog, the
1043           interrupt handler pokes it.  The second expiration causes an
1044           NMI that prints a message. The third expiration causes a
1045           global soft reset.
1046
1047           When userspace has /dev/watchdog open, no poking is done
1048           from the first interrupt, it is then only poked when the
1049           device is written.
1050
1051 config BCM63XX_WDT
1052         tristate "Broadcom BCM63xx hardware watchdog"
1053         depends on BCM63XX
1054         help
1055           Watchdog driver for the built in watchdog hardware in Broadcom
1056           BCM63xx SoC.
1057
1058           To compile this driver as a loadable module, choose M here.
1059           The module will be called bcm63xx_wdt.
1060
1061 config LANTIQ_WDT
1062         tristate "Lantiq SoC watchdog"
1063         depends on LANTIQ
1064         help
1065           Hardware driver for the Lantiq SoC Watchdog Timer.
1066
1067 # PARISC Architecture
1068
1069 # POWERPC Architecture
1070
1071 config GEF_WDT
1072         tristate "GE Watchdog Timer"
1073         depends on GE_FPGA
1074         ---help---
1075           Watchdog timer found in a number of GE single board computers.
1076
1077 config MPC5200_WDT
1078         bool "MPC52xx Watchdog Timer"
1079         depends on PPC_MPC52xx
1080         help
1081           Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog.
1082
1083 config 8xxx_WDT
1084         tristate "MPC8xxx Platform Watchdog Timer"
1085         depends on PPC_8xx || PPC_83xx || PPC_86xx
1086         help
1087           This driver is for a SoC level watchdog that exists on some
1088           Freescale PowerPC processors. So far this driver supports:
1089           - MPC8xx watchdogs
1090           - MPC83xx watchdogs
1091           - MPC86xx watchdogs
1092
1093           For BookE processors (MPC85xx) use the BOOKE_WDT driver instead.
1094
1095 config MV64X60_WDT
1096         tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
1097         depends on MV64X60
1098
1099 config PIKA_WDT
1100         tristate "PIKA FPGA Watchdog"
1101         depends on WARP
1102         default y
1103         help
1104           This enables the watchdog in the PIKA FPGA. Currently used on
1105           the Warp platform.
1106
1107 config BOOKE_WDT
1108         tristate "PowerPC Book-E Watchdog Timer"
1109         depends on BOOKE || 4xx
1110         ---help---
1111           Watchdog driver for PowerPC Book-E chips, such as the Freescale
1112           MPC85xx SOCs and the IBM PowerPC 440.
1113
1114           Please see Documentation/watchdog/watchdog-api.txt for
1115           more information.
1116
1117 config BOOKE_WDT_DEFAULT_TIMEOUT
1118         int "PowerPC Book-E Watchdog Timer Default Timeout"
1119         depends on BOOKE_WDT
1120         default 38 if PPC_FSL_BOOK3E
1121         range 0 63 if PPC_FSL_BOOK3E
1122         default 3 if !PPC_FSL_BOOK3E
1123         range 0 3 if !PPC_FSL_BOOK3E
1124         help
1125           Select the default watchdog timer period to be used by the PowerPC
1126           Book-E watchdog driver.  A watchdog "event" occurs when the bit
1127           position represented by this number transitions from zero to one.
1128
1129           For Freescale Book-E processors, this is a number between 0 and 63.
1130           For other Book-E processors, this is a number between 0 and 3.
1131
1132           The value can be overridden by the wdt_period command-line parameter.
1133
1134 # PPC64 Architecture
1135
1136 config WATCHDOG_RTAS
1137         tristate "RTAS watchdog"
1138         depends on PPC_RTAS
1139         help
1140           This driver adds watchdog support for the RTAS watchdog.
1141
1142           To compile this driver as a module, choose M here. The module
1143           will be called wdrtas.
1144
1145 # S390 Architecture
1146
1147 config ZVM_WATCHDOG
1148         tristate "z/VM Watchdog Timer"
1149         depends on S390
1150         help
1151           IBM s/390 and zSeries machines running under z/VM 5.1 or later
1152           provide a virtual watchdog timer to their guest that cause a
1153           user define Control Program command to be executed after a
1154           timeout.
1155
1156           To compile this driver as a module, choose M here. The module
1157           will be called vmwatchdog.
1158
1159 # SUPERH (sh + sh64) Architecture
1160
1161 config SH_WDT
1162         tristate "SuperH Watchdog"
1163         depends on SUPERH && (CPU_SH3 || CPU_SH4)
1164         select WATCHDOG_CORE
1165         help
1166           This driver adds watchdog support for the integrated watchdog in the
1167           SuperH processors. If you have one of these processors and wish
1168           to have watchdog support enabled, say Y, otherwise say N.
1169
1170           As a side note, saying Y here will automatically boost HZ to 1000
1171           so that the timer has a chance to clear the overflow counter. On
1172           slower systems (such as the SH-2 and SH-3) this will likely yield
1173           some performance issues. As such, the WDT should be avoided here
1174           unless it is absolutely necessary.
1175
1176           To compile this driver as a module, choose M here: the
1177           module will be called shwdt.
1178
1179 # SPARC Architecture
1180
1181 # SPARC64 Architecture
1182
1183 config WATCHDOG_CP1XXX
1184         tristate "CP1XXX Hardware Watchdog support"
1185         depends on SPARC64 && PCI
1186         ---help---
1187           This is the driver for the hardware watchdog timers present on
1188           Sun Microsystems CompactPCI models CP1400 and CP1500.
1189
1190           To compile this driver as a module, choose M here: the
1191           module will be called cpwatchdog.
1192
1193           If you do not have a CompactPCI model CP1400 or CP1500, or
1194           another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
1195           you should say N to this option.
1196
1197 config WATCHDOG_RIO
1198         tristate "RIO Hardware Watchdog support"
1199         depends on SPARC64 && PCI
1200         help
1201           Say Y here to support the hardware watchdog capability on Sun RIO
1202           machines.  The watchdog timeout period is normally one minute but
1203           can be changed with a boot-time parameter.
1204
1205 # XTENSA Architecture
1206
1207 # Xen Architecture
1208
1209 config XEN_WDT
1210         tristate "Xen Watchdog support"
1211         depends on XEN
1212         help
1213           Say Y here to support the hypervisor watchdog capability provided
1214           by Xen 4.0 and newer.  The watchdog timeout period is normally one
1215           minute but can be changed with a boot-time parameter.
1216
1217 config UML_WATCHDOG
1218         tristate "UML watchdog"
1219         depends on UML
1220
1221 #
1222 # ISA-based Watchdog Cards
1223 #
1224
1225 comment "ISA-based Watchdog Cards"
1226         depends on ISA
1227
1228 config PCWATCHDOG
1229         tristate "Berkshire Products ISA-PC Watchdog"
1230         depends on ISA
1231         ---help---
1232           This is the driver for the Berkshire Products ISA-PC Watchdog card.
1233           This card simply watches your kernel to make sure it doesn't freeze,
1234           and if it does, it reboots your computer after a certain amount of
1235           time. This driver is like the WDT501 driver but for different
1236           hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.txt>. The PC
1237           watchdog cards can be ordered from <http://www.berkprod.com/>.
1238
1239           To compile this driver as a module, choose M here: the
1240           module will be called pcwd.
1241
1242           Most people will say N.
1243
1244 config MIXCOMWD
1245         tristate "Mixcom Watchdog"
1246         depends on ISA
1247         ---help---
1248           This is a driver for the Mixcom hardware watchdog cards.  This
1249           watchdog simply watches your kernel to make sure it doesn't freeze,
1250           and if it does, it reboots your computer after a certain amount of
1251           time.
1252
1253           To compile this driver as a module, choose M here: the
1254           module will be called mixcomwd.
1255
1256           Most people will say N.
1257
1258 config WDT
1259         tristate "WDT Watchdog timer"
1260         depends on ISA
1261         ---help---
1262           If you have a WDT500P or WDT501P watchdog board, say Y here,
1263           otherwise N. It is not possible to probe for this board, which means
1264           that you have to inform the kernel about the IO port and IRQ that
1265           is needed (you can do this via the io and irq parameters)
1266
1267           To compile this driver as a module, choose M here: the
1268           module will be called wdt.
1269
1270 #
1271 # PCI-based Watchdog Cards
1272 #
1273
1274 comment "PCI-based Watchdog Cards"
1275         depends on PCI
1276
1277 config PCIPCWATCHDOG
1278         tristate "Berkshire Products PCI-PC Watchdog"
1279         depends on PCI
1280         ---help---
1281           This is the driver for the Berkshire Products PCI-PC Watchdog card.
1282           This card simply watches your kernel to make sure it doesn't freeze,
1283           and if it does, it reboots your computer after a certain amount of
1284           time. The card can also monitor the internal temperature of the PC.
1285           More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>.
1286
1287           To compile this driver as a module, choose M here: the
1288           module will be called pcwd_pci.
1289
1290           Most people will say N.
1291
1292 config WDTPCI
1293         tristate "PCI-WDT500/501 Watchdog timer"
1294         depends on PCI
1295         ---help---
1296           If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
1297
1298           If you have a PCI-WDT501 watchdog board then you can enable the
1299           temperature sensor by setting the type parameter to 501.
1300
1301           If you want to enable the Fan Tachometer on the PCI-WDT501, then you
1302           can do this via the tachometer parameter. Only do this if you have a
1303           fan tachometer actually set up.
1304
1305           To compile this driver as a module, choose M here: the
1306           module will be called wdt_pci.
1307
1308 #
1309 # USB-based Watchdog Cards
1310 #
1311
1312 comment "USB-based Watchdog Cards"
1313         depends on USB
1314
1315 config USBPCWATCHDOG
1316         tristate "Berkshire Products USB-PC Watchdog"
1317         depends on USB
1318         ---help---
1319           This is the driver for the Berkshire Products USB-PC Watchdog card.
1320           This card simply watches your kernel to make sure it doesn't freeze,
1321           and if it does, it reboots your computer after a certain amount of
1322           time. The card can also monitor the internal temperature of the PC.
1323           More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>.
1324
1325           To compile this driver as a module, choose M here: the
1326           module will be called pcwd_usb.
1327
1328           Most people will say N.
1329
1330 endif # WATCHDOG