Linux-2.6.12-rc2
[pandora-kernel.git] / drivers / video / pxafb.c
1 /*
2  *  linux/drivers/video/pxafb.c
3  *
4  *  Copyright (C) 1999 Eric A. Thomas.
5  *  Copyright (C) 2004 Jean-Frederic Clere.
6  *  Copyright (C) 2004 Ian Campbell.
7  *  Copyright (C) 2004 Jeff Lackey.
8  *   Based on sa1100fb.c Copyright (C) 1999 Eric A. Thomas
9  *  which in turn is
10  *   Based on acornfb.c Copyright (C) Russell King.
11  *
12  * This file is subject to the terms and conditions of the GNU General Public
13  * License.  See the file COPYING in the main directory of this archive for
14  * more details.
15  *
16  *              Intel PXA250/210 LCD Controller Frame Buffer Driver
17  *
18  * Please direct your questions and comments on this driver to the following
19  * email address:
20  *
21  *      linux-arm-kernel@lists.arm.linux.org.uk
22  *
23  */
24
25 #include <linux/config.h>
26 #include <linux/module.h>
27 #include <linux/moduleparam.h>
28 #include <linux/kernel.h>
29 #include <linux/sched.h>
30 #include <linux/errno.h>
31 #include <linux/string.h>
32 #include <linux/interrupt.h>
33 #include <linux/slab.h>
34 #include <linux/fb.h>
35 #include <linux/delay.h>
36 #include <linux/init.h>
37 #include <linux/ioport.h>
38 #include <linux/cpufreq.h>
39 #include <linux/device.h>
40 #include <linux/dma-mapping.h>
41
42 #include <asm/hardware.h>
43 #include <asm/io.h>
44 #include <asm/irq.h>
45 #include <asm/uaccess.h>
46 #include <asm/arch/pxa-regs.h>
47 #include <asm/arch/bitfield.h>
48 #include <asm/arch/pxafb.h>
49
50 /*
51  * Complain if VAR is out of range.
52  */
53 #define DEBUG_VAR 1
54
55 #include "pxafb.h"
56
57 /* Bits which should not be set in machine configuration structures */
58 #define LCCR0_INVALID_CONFIG_MASK (LCCR0_OUM|LCCR0_BM|LCCR0_QDM|LCCR0_DIS|LCCR0_EFM|LCCR0_IUM|LCCR0_SFM|LCCR0_LDM|LCCR0_ENB)
59 #define LCCR3_INVALID_CONFIG_MASK (LCCR3_HSP|LCCR3_VSP|LCCR3_PCD|LCCR3_BPP)
60
61 static void (*pxafb_backlight_power)(int);
62 static void (*pxafb_lcd_power)(int);
63
64 static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *);
65 static void set_ctrlr_state(struct pxafb_info *fbi, u_int state);
66
67 #ifdef CONFIG_FB_PXA_PARAMETERS
68 #define PXAFB_OPTIONS_SIZE 256
69 static char g_options[PXAFB_OPTIONS_SIZE] __initdata = "";
70 #endif
71
72 static inline void pxafb_schedule_work(struct pxafb_info *fbi, u_int state)
73 {
74         unsigned long flags;
75
76         local_irq_save(flags);
77         /*
78          * We need to handle two requests being made at the same time.
79          * There are two important cases:
80          *  1. When we are changing VT (C_REENABLE) while unblanking (C_ENABLE)
81          *     We must perform the unblanking, which will do our REENABLE for us.
82          *  2. When we are blanking, but immediately unblank before we have
83          *     blanked.  We do the "REENABLE" thing here as well, just to be sure.
84          */
85         if (fbi->task_state == C_ENABLE && state == C_REENABLE)
86                 state = (u_int) -1;
87         if (fbi->task_state == C_DISABLE && state == C_ENABLE)
88                 state = C_REENABLE;
89
90         if (state != (u_int)-1) {
91                 fbi->task_state = state;
92                 schedule_work(&fbi->task);
93         }
94         local_irq_restore(flags);
95 }
96
97 static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf)
98 {
99         chan &= 0xffff;
100         chan >>= 16 - bf->length;
101         return chan << bf->offset;
102 }
103
104 static int
105 pxafb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue,
106                        u_int trans, struct fb_info *info)
107 {
108         struct pxafb_info *fbi = (struct pxafb_info *)info;
109         u_int val, ret = 1;
110
111         if (regno < fbi->palette_size) {
112                 if (fbi->fb.var.grayscale) {
113                         val = ((blue >> 8) & 0x00ff);
114                 } else {
115                         val  = ((red   >>  0) & 0xf800);
116                         val |= ((green >>  5) & 0x07e0);
117                         val |= ((blue  >> 11) & 0x001f);
118                 }
119                 fbi->palette_cpu[regno] = val;
120                 ret = 0;
121         }
122         return ret;
123 }
124
125 static int
126 pxafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
127                    u_int trans, struct fb_info *info)
128 {
129         struct pxafb_info *fbi = (struct pxafb_info *)info;
130         unsigned int val;
131         int ret = 1;
132
133         /*
134          * If inverse mode was selected, invert all the colours
135          * rather than the register number.  The register number
136          * is what you poke into the framebuffer to produce the
137          * colour you requested.
138          */
139         if (fbi->cmap_inverse) {
140                 red   = 0xffff - red;
141                 green = 0xffff - green;
142                 blue  = 0xffff - blue;
143         }
144
145         /*
146          * If greyscale is true, then we convert the RGB value
147          * to greyscale no matter what visual we are using.
148          */
149         if (fbi->fb.var.grayscale)
150                 red = green = blue = (19595 * red + 38470 * green +
151                                         7471 * blue) >> 16;
152
153         switch (fbi->fb.fix.visual) {
154         case FB_VISUAL_TRUECOLOR:
155                 /*
156                  * 16-bit True Colour.  We encode the RGB value
157                  * according to the RGB bitfield information.
158                  */
159                 if (regno < 16) {
160                         u32 *pal = fbi->fb.pseudo_palette;
161
162                         val  = chan_to_field(red, &fbi->fb.var.red);
163                         val |= chan_to_field(green, &fbi->fb.var.green);
164                         val |= chan_to_field(blue, &fbi->fb.var.blue);
165
166                         pal[regno] = val;
167                         ret = 0;
168                 }
169                 break;
170
171         case FB_VISUAL_STATIC_PSEUDOCOLOR:
172         case FB_VISUAL_PSEUDOCOLOR:
173                 ret = pxafb_setpalettereg(regno, red, green, blue, trans, info);
174                 break;
175         }
176
177         return ret;
178 }
179
180 /*
181  *  pxafb_bpp_to_lccr3():
182  *    Convert a bits per pixel value to the correct bit pattern for LCCR3
183  */
184 static int pxafb_bpp_to_lccr3(struct fb_var_screeninfo *var)
185 {
186         int ret = 0;
187         switch (var->bits_per_pixel) {
188         case 1:  ret = LCCR3_1BPP; break;
189         case 2:  ret = LCCR3_2BPP; break;
190         case 4:  ret = LCCR3_4BPP; break;
191         case 8:  ret = LCCR3_8BPP; break;
192         case 16: ret = LCCR3_16BPP; break;
193         }
194         return ret;
195 }
196
197 #ifdef CONFIG_CPU_FREQ
198 /*
199  *  pxafb_display_dma_period()
200  *    Calculate the minimum period (in picoseconds) between two DMA
201  *    requests for the LCD controller.  If we hit this, it means we're
202  *    doing nothing but LCD DMA.
203  */
204 static unsigned int pxafb_display_dma_period(struct fb_var_screeninfo *var)
205 {
206        /*
207         * Period = pixclock * bits_per_byte * bytes_per_transfer
208         *              / memory_bits_per_pixel;
209         */
210        return var->pixclock * 8 * 16 / var->bits_per_pixel;
211 }
212
213 extern unsigned int get_clk_frequency_khz(int info);
214 #endif
215
216 /*
217  *  pxafb_check_var():
218  *    Get the video params out of 'var'. If a value doesn't fit, round it up,
219  *    if it's too big, return -EINVAL.
220  *
221  *    Round up in the following order: bits_per_pixel, xres,
222  *    yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale,
223  *    bitfields, horizontal timing, vertical timing.
224  */
225 static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
226 {
227         struct pxafb_info *fbi = (struct pxafb_info *)info;
228
229         if (var->xres < MIN_XRES)
230                 var->xres = MIN_XRES;
231         if (var->yres < MIN_YRES)
232                 var->yres = MIN_YRES;
233         if (var->xres > fbi->max_xres)
234                 var->xres = fbi->max_xres;
235         if (var->yres > fbi->max_yres)
236                 var->yres = fbi->max_yres;
237         var->xres_virtual =
238                 max(var->xres_virtual, var->xres);
239         var->yres_virtual =
240                 max(var->yres_virtual, var->yres);
241
242         /*
243          * Setup the RGB parameters for this display.
244          *
245          * The pixel packing format is described on page 7-11 of the
246          * PXA2XX Developer's Manual.
247          */
248         if (var->bits_per_pixel == 16) {
249                 var->red.offset   = 11; var->red.length   = 5;
250                 var->green.offset = 5;  var->green.length = 6;
251                 var->blue.offset  = 0;  var->blue.length  = 5;
252                 var->transp.offset = var->transp.length = 0;
253         } else {
254                 var->red.offset = var->green.offset = var->blue.offset = var->transp.offset = 0;
255                 var->red.length   = 8;
256                 var->green.length = 8;
257                 var->blue.length  = 8;
258                 var->transp.length = 0;
259         }
260
261 #ifdef CONFIG_CPU_FREQ
262         DPRINTK("dma period = %d ps, clock = %d kHz\n",
263                 pxafb_display_dma_period(var),
264                 get_clk_frequency_khz(0));
265 #endif
266
267         return 0;
268 }
269
270 static inline void pxafb_set_truecolor(u_int is_true_color)
271 {
272         DPRINTK("true_color = %d\n", is_true_color);
273         // do your machine-specific setup if needed
274 }
275
276 /*
277  * pxafb_set_par():
278  *      Set the user defined part of the display for the specified console
279  */
280 static int pxafb_set_par(struct fb_info *info)
281 {
282         struct pxafb_info *fbi = (struct pxafb_info *)info;
283         struct fb_var_screeninfo *var = &info->var;
284         unsigned long palette_mem_size;
285
286         DPRINTK("set_par\n");
287
288         if (var->bits_per_pixel == 16)
289                 fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
290         else if (!fbi->cmap_static)
291                 fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
292         else {
293                 /*
294                  * Some people have weird ideas about wanting static
295                  * pseudocolor maps.  I suspect their user space
296                  * applications are broken.
297                  */
298                 fbi->fb.fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
299         }
300
301         fbi->fb.fix.line_length = var->xres_virtual *
302                                   var->bits_per_pixel / 8;
303         if (var->bits_per_pixel == 16)
304                 fbi->palette_size = 0;
305         else
306                 fbi->palette_size = var->bits_per_pixel == 1 ? 4 : 1 << var->bits_per_pixel;
307
308         palette_mem_size = fbi->palette_size * sizeof(u16);
309
310         DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
311
312         fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
313         fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
314
315         /*
316          * Set (any) board control register to handle new color depth
317          */
318         pxafb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR);
319
320         if (fbi->fb.var.bits_per_pixel == 16)
321                 fb_dealloc_cmap(&fbi->fb.cmap);
322         else
323                 fb_alloc_cmap(&fbi->fb.cmap, 1<<fbi->fb.var.bits_per_pixel, 0);
324
325         pxafb_activate_var(var, fbi);
326
327         return 0;
328 }
329
330 /*
331  * Formal definition of the VESA spec:
332  *  On
333  *      This refers to the state of the display when it is in full operation
334  *  Stand-By
335  *      This defines an optional operating state of minimal power reduction with
336  *      the shortest recovery time
337  *  Suspend
338  *      This refers to a level of power management in which substantial power
339  *      reduction is achieved by the display.  The display can have a longer
340  *      recovery time from this state than from the Stand-by state
341  *  Off
342  *      This indicates that the display is consuming the lowest level of power
343  *      and is non-operational. Recovery from this state may optionally require
344  *      the user to manually power on the monitor
345  *
346  *  Now, the fbdev driver adds an additional state, (blank), where they
347  *  turn off the video (maybe by colormap tricks), but don't mess with the
348  *  video itself: think of it semantically between on and Stand-By.
349  *
350  *  So here's what we should do in our fbdev blank routine:
351  *
352  *      VESA_NO_BLANKING (mode 0)       Video on,  front/back light on
353  *      VESA_VSYNC_SUSPEND (mode 1)     Video on,  front/back light off
354  *      VESA_HSYNC_SUSPEND (mode 2)     Video on,  front/back light off
355  *      VESA_POWERDOWN (mode 3)         Video off, front/back light off
356  *
357  *  This will match the matrox implementation.
358  */
359
360 /*
361  * pxafb_blank():
362  *      Blank the display by setting all palette values to zero.  Note, the
363  *      16 bpp mode does not really use the palette, so this will not
364  *      blank the display in all modes.
365  */
366 static int pxafb_blank(int blank, struct fb_info *info)
367 {
368         struct pxafb_info *fbi = (struct pxafb_info *)info;
369         int i;
370
371         DPRINTK("pxafb_blank: blank=%d\n", blank);
372
373         switch (blank) {
374         case FB_BLANK_POWERDOWN:
375         case FB_BLANK_VSYNC_SUSPEND:
376         case FB_BLANK_HSYNC_SUSPEND:
377         case FB_BLANK_NORMAL:
378                 if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
379                     fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
380                         for (i = 0; i < fbi->palette_size; i++)
381                                 pxafb_setpalettereg(i, 0, 0, 0, 0, info);
382
383                 pxafb_schedule_work(fbi, C_DISABLE);
384                 //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank);
385                 break;
386
387         case FB_BLANK_UNBLANK:
388                 //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank);
389                 if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
390                     fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
391                         fb_set_cmap(&fbi->fb.cmap, info);
392                 pxafb_schedule_work(fbi, C_ENABLE);
393         }
394         return 0;
395 }
396
397 static int pxafb_mmap(struct fb_info *info, struct file *file,
398                       struct vm_area_struct *vma)
399 {
400         struct pxafb_info *fbi = (struct pxafb_info *)info;
401         unsigned long off = vma->vm_pgoff << PAGE_SHIFT;
402
403         if (off < info->fix.smem_len) {
404                 vma->vm_pgoff += 1;
405                 return dma_mmap_writecombine(fbi->dev, vma, fbi->map_cpu,
406                                              fbi->map_dma, fbi->map_size);
407         }
408         return -EINVAL;
409 }
410
411 static struct fb_ops pxafb_ops = {
412         .owner          = THIS_MODULE,
413         .fb_check_var   = pxafb_check_var,
414         .fb_set_par     = pxafb_set_par,
415         .fb_setcolreg   = pxafb_setcolreg,
416         .fb_fillrect    = cfb_fillrect,
417         .fb_copyarea    = cfb_copyarea,
418         .fb_imageblit   = cfb_imageblit,
419         .fb_blank       = pxafb_blank,
420         .fb_cursor      = soft_cursor,
421         .fb_mmap        = pxafb_mmap,
422 };
423
424 /*
425  * Calculate the PCD value from the clock rate (in picoseconds).
426  * We take account of the PPCR clock setting.
427  * From PXA Developer's Manual:
428  *
429  *   PixelClock =      LCLK
430  *                -------------
431  *                2 ( PCD + 1 )
432  *
433  *   PCD =      LCLK
434  *         ------------- - 1
435  *         2(PixelClock)
436  *
437  * Where:
438  *   LCLK = LCD/Memory Clock
439  *   PCD = LCCR3[7:0]
440  *
441  * PixelClock here is in Hz while the pixclock argument given is the
442  * period in picoseconds. Hence PixelClock = 1 / ( pixclock * 10^-12 )
443  *
444  * The function get_lclk_frequency_10khz returns LCLK in units of
445  * 10khz. Calling the result of this function lclk gives us the
446  * following
447  *
448  *    PCD = (lclk * 10^4 ) * ( pixclock * 10^-12 )
449  *          -------------------------------------- - 1
450  *                          2
451  *
452  * Factoring the 10^4 and 10^-12 out gives 10^-8 == 1 / 100000000 as used below.
453  */
454 static inline unsigned int get_pcd(unsigned int pixclock)
455 {
456         unsigned long long pcd;
457
458         /* FIXME: Need to take into account Double Pixel Clock mode
459          * (DPC) bit? or perhaps set it based on the various clock
460          * speeds */
461
462         pcd = (unsigned long long)get_lcdclk_frequency_10khz() * pixclock;
463         pcd /= 100000000 * 2;
464         /* no need for this, since we should subtract 1 anyway. they cancel */
465         /* pcd += 1; */ /* make up for integer math truncations */
466         return (unsigned int)pcd;
467 }
468
469 /*
470  * pxafb_activate_var():
471  *      Configures LCD Controller based on entries in var parameter.  Settings are
472  *      only written to the controller if changes were made.
473  */
474 static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *fbi)
475 {
476         struct pxafb_lcd_reg new_regs;
477         u_long flags;
478         u_int lines_per_panel, pcd = get_pcd(var->pixclock);
479
480         DPRINTK("Configuring PXA LCD\n");
481
482         DPRINTK("var: xres=%d hslen=%d lm=%d rm=%d\n",
483                 var->xres, var->hsync_len,
484                 var->left_margin, var->right_margin);
485         DPRINTK("var: yres=%d vslen=%d um=%d bm=%d\n",
486                 var->yres, var->vsync_len,
487                 var->upper_margin, var->lower_margin);
488         DPRINTK("var: pixclock=%d pcd=%d\n", var->pixclock, pcd);
489
490 #if DEBUG_VAR
491         if (var->xres < 16        || var->xres > 1024)
492                 printk(KERN_ERR "%s: invalid xres %d\n",
493                         fbi->fb.fix.id, var->xres);
494         switch(var->bits_per_pixel) {
495         case 1:
496         case 2:
497         case 4:
498         case 8:
499         case 16:
500                 break;
501         default:
502                 printk(KERN_ERR "%s: invalid bit depth %d\n",
503                        fbi->fb.fix.id, var->bits_per_pixel);
504                 break;
505         }
506         if (var->hsync_len < 1    || var->hsync_len > 64)
507                 printk(KERN_ERR "%s: invalid hsync_len %d\n",
508                         fbi->fb.fix.id, var->hsync_len);
509         if (var->left_margin < 1  || var->left_margin > 255)
510                 printk(KERN_ERR "%s: invalid left_margin %d\n",
511                         fbi->fb.fix.id, var->left_margin);
512         if (var->right_margin < 1 || var->right_margin > 255)
513                 printk(KERN_ERR "%s: invalid right_margin %d\n",
514                         fbi->fb.fix.id, var->right_margin);
515         if (var->yres < 1         || var->yres > 1024)
516                 printk(KERN_ERR "%s: invalid yres %d\n",
517                         fbi->fb.fix.id, var->yres);
518         if (var->vsync_len < 1    || var->vsync_len > 64)
519                 printk(KERN_ERR "%s: invalid vsync_len %d\n",
520                         fbi->fb.fix.id, var->vsync_len);
521         if (var->upper_margin < 0 || var->upper_margin > 255)
522                 printk(KERN_ERR "%s: invalid upper_margin %d\n",
523                         fbi->fb.fix.id, var->upper_margin);
524         if (var->lower_margin < 0 || var->lower_margin > 255)
525                 printk(KERN_ERR "%s: invalid lower_margin %d\n",
526                         fbi->fb.fix.id, var->lower_margin);
527 #endif
528
529         new_regs.lccr0 = fbi->lccr0 |
530                 (LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM |
531                  LCCR0_QDM | LCCR0_BM  | LCCR0_OUM);
532
533         new_regs.lccr1 =
534                 LCCR1_DisWdth(var->xres) +
535                 LCCR1_HorSnchWdth(var->hsync_len) +
536                 LCCR1_BegLnDel(var->left_margin) +
537                 LCCR1_EndLnDel(var->right_margin);
538
539         /*
540          * If we have a dual scan LCD, we need to halve
541          * the YRES parameter.
542          */
543         lines_per_panel = var->yres;
544         if ((fbi->lccr0 & LCCR0_SDS) == LCCR0_Dual)
545                 lines_per_panel /= 2;
546
547         new_regs.lccr2 =
548                 LCCR2_DisHght(lines_per_panel) +
549                 LCCR2_VrtSnchWdth(var->vsync_len) +
550                 LCCR2_BegFrmDel(var->upper_margin) +
551                 LCCR2_EndFrmDel(var->lower_margin);
552
553         new_regs.lccr3 = fbi->lccr3 |
554                 pxafb_bpp_to_lccr3(var) |
555                 (var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) |
556                 (var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL);
557
558         if (pcd)
559                 new_regs.lccr3 |= LCCR3_PixClkDiv(pcd);
560
561         DPRINTK("nlccr0 = 0x%08x\n", new_regs.lccr0);
562         DPRINTK("nlccr1 = 0x%08x\n", new_regs.lccr1);
563         DPRINTK("nlccr2 = 0x%08x\n", new_regs.lccr2);
564         DPRINTK("nlccr3 = 0x%08x\n", new_regs.lccr3);
565
566         /* Update shadow copy atomically */
567         local_irq_save(flags);
568
569         /* setup dma descriptors */
570         fbi->dmadesc_fblow_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 3*16);
571         fbi->dmadesc_fbhigh_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 2*16);
572         fbi->dmadesc_palette_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 1*16);
573
574         fbi->dmadesc_fblow_dma = fbi->palette_dma - 3*16;
575         fbi->dmadesc_fbhigh_dma = fbi->palette_dma - 2*16;
576         fbi->dmadesc_palette_dma = fbi->palette_dma - 1*16;
577
578 #define BYTES_PER_PANEL (lines_per_panel * fbi->fb.fix.line_length)
579
580         /* populate descriptors */
581         fbi->dmadesc_fblow_cpu->fdadr = fbi->dmadesc_fblow_dma;
582         fbi->dmadesc_fblow_cpu->fsadr = fbi->screen_dma + BYTES_PER_PANEL;
583         fbi->dmadesc_fblow_cpu->fidr  = 0;
584         fbi->dmadesc_fblow_cpu->ldcmd = BYTES_PER_PANEL;
585
586         fbi->fdadr1 = fbi->dmadesc_fblow_dma; /* only used in dual-panel mode */
587
588         fbi->dmadesc_fbhigh_cpu->fsadr = fbi->screen_dma;
589         fbi->dmadesc_fbhigh_cpu->fidr = 0;
590         fbi->dmadesc_fbhigh_cpu->ldcmd = BYTES_PER_PANEL;
591
592         fbi->dmadesc_palette_cpu->fsadr = fbi->palette_dma;
593         fbi->dmadesc_palette_cpu->fidr  = 0;
594         fbi->dmadesc_palette_cpu->ldcmd = (fbi->palette_size * 2) | LDCMD_PAL;
595
596         if (var->bits_per_pixel == 16) {
597                 /* palette shouldn't be loaded in true-color mode */
598                 fbi->dmadesc_fbhigh_cpu->fdadr = fbi->dmadesc_fbhigh_dma;
599                 fbi->fdadr0 = fbi->dmadesc_fbhigh_dma; /* no pal just fbhigh */
600                 /* init it to something, even though we won't be using it */
601                 fbi->dmadesc_palette_cpu->fdadr = fbi->dmadesc_palette_dma;
602         } else {
603                 fbi->dmadesc_palette_cpu->fdadr = fbi->dmadesc_fbhigh_dma;
604                 fbi->dmadesc_fbhigh_cpu->fdadr = fbi->dmadesc_palette_dma;
605                 fbi->fdadr0 = fbi->dmadesc_palette_dma; /* flips back and forth between pal and fbhigh */
606         }
607
608 #if 0
609         DPRINTK("fbi->dmadesc_fblow_cpu = 0x%p\n", fbi->dmadesc_fblow_cpu);
610         DPRINTK("fbi->dmadesc_fbhigh_cpu = 0x%p\n", fbi->dmadesc_fbhigh_cpu);
611         DPRINTK("fbi->dmadesc_palette_cpu = 0x%p\n", fbi->dmadesc_palette_cpu);
612         DPRINTK("fbi->dmadesc_fblow_dma = 0x%x\n", fbi->dmadesc_fblow_dma);
613         DPRINTK("fbi->dmadesc_fbhigh_dma = 0x%x\n", fbi->dmadesc_fbhigh_dma);
614         DPRINTK("fbi->dmadesc_palette_dma = 0x%x\n", fbi->dmadesc_palette_dma);
615
616         DPRINTK("fbi->dmadesc_fblow_cpu->fdadr = 0x%x\n", fbi->dmadesc_fblow_cpu->fdadr);
617         DPRINTK("fbi->dmadesc_fbhigh_cpu->fdadr = 0x%x\n", fbi->dmadesc_fbhigh_cpu->fdadr);
618         DPRINTK("fbi->dmadesc_palette_cpu->fdadr = 0x%x\n", fbi->dmadesc_palette_cpu->fdadr);
619
620         DPRINTK("fbi->dmadesc_fblow_cpu->fsadr = 0x%x\n", fbi->dmadesc_fblow_cpu->fsadr);
621         DPRINTK("fbi->dmadesc_fbhigh_cpu->fsadr = 0x%x\n", fbi->dmadesc_fbhigh_cpu->fsadr);
622         DPRINTK("fbi->dmadesc_palette_cpu->fsadr = 0x%x\n", fbi->dmadesc_palette_cpu->fsadr);
623
624         DPRINTK("fbi->dmadesc_fblow_cpu->ldcmd = 0x%x\n", fbi->dmadesc_fblow_cpu->ldcmd);
625         DPRINTK("fbi->dmadesc_fbhigh_cpu->ldcmd = 0x%x\n", fbi->dmadesc_fbhigh_cpu->ldcmd);
626         DPRINTK("fbi->dmadesc_palette_cpu->ldcmd = 0x%x\n", fbi->dmadesc_palette_cpu->ldcmd);
627 #endif
628
629         fbi->reg_lccr0 = new_regs.lccr0;
630         fbi->reg_lccr1 = new_regs.lccr1;
631         fbi->reg_lccr2 = new_regs.lccr2;
632         fbi->reg_lccr3 = new_regs.lccr3;
633         local_irq_restore(flags);
634
635         /*
636          * Only update the registers if the controller is enabled
637          * and something has changed.
638          */
639         if ((LCCR0  != fbi->reg_lccr0) || (LCCR1  != fbi->reg_lccr1) ||
640             (LCCR2  != fbi->reg_lccr2) || (LCCR3  != fbi->reg_lccr3) ||
641             (FDADR0 != fbi->fdadr0)    || (FDADR1 != fbi->fdadr1))
642                 pxafb_schedule_work(fbi, C_REENABLE);
643
644         return 0;
645 }
646
647 /*
648  * NOTE!  The following functions are purely helpers for set_ctrlr_state.
649  * Do not call them directly; set_ctrlr_state does the correct serialisation
650  * to ensure that things happen in the right way 100% of time time.
651  *      -- rmk
652  */
653 static inline void __pxafb_backlight_power(struct pxafb_info *fbi, int on)
654 {
655         DPRINTK("backlight o%s\n", on ? "n" : "ff");
656
657         if (pxafb_backlight_power)
658                 pxafb_backlight_power(on);
659 }
660
661 static inline void __pxafb_lcd_power(struct pxafb_info *fbi, int on)
662 {
663         DPRINTK("LCD power o%s\n", on ? "n" : "ff");
664
665         if (pxafb_lcd_power)
666                 pxafb_lcd_power(on);
667 }
668
669 static void pxafb_setup_gpio(struct pxafb_info *fbi)
670 {
671         int gpio, ldd_bits;
672         unsigned int lccr0 = fbi->lccr0;
673
674         /*
675          * setup is based on type of panel supported
676         */
677
678         /* 4 bit interface */
679         if ((lccr0 & LCCR0_CMS) == LCCR0_Mono &&
680             (lccr0 & LCCR0_SDS) == LCCR0_Sngl &&
681             (lccr0 & LCCR0_DPD) == LCCR0_4PixMono)
682                 ldd_bits = 4;
683
684         /* 8 bit interface */
685         else if (((lccr0 & LCCR0_CMS) == LCCR0_Mono &&
686                   ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_DPD) == LCCR0_8PixMono)) ||
687                  ((lccr0 & LCCR0_CMS) == LCCR0_Color &&
688                   (lccr0 & LCCR0_PAS) == LCCR0_Pas && (lccr0 & LCCR0_SDS) == LCCR0_Sngl))
689                 ldd_bits = 8;
690
691         /* 16 bit interface */
692         else if ((lccr0 & LCCR0_CMS) == LCCR0_Color &&
693                  ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_PAS) == LCCR0_Act))
694                 ldd_bits = 16;
695
696         else {
697                 printk(KERN_ERR "pxafb_setup_gpio: unable to determine bits per pixel\n");
698                 return;
699         }
700
701         for (gpio = 58; ldd_bits; gpio++, ldd_bits--)
702                 pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT);
703         pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
704         pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
705         pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
706         pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
707 }
708
709 static void pxafb_enable_controller(struct pxafb_info *fbi)
710 {
711         DPRINTK("Enabling LCD controller\n");
712         DPRINTK("fdadr0 0x%08x\n", (unsigned int) fbi->fdadr0);
713         DPRINTK("fdadr1 0x%08x\n", (unsigned int) fbi->fdadr1);
714         DPRINTK("reg_lccr0 0x%08x\n", (unsigned int) fbi->reg_lccr0);
715         DPRINTK("reg_lccr1 0x%08x\n", (unsigned int) fbi->reg_lccr1);
716         DPRINTK("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2);
717         DPRINTK("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
718
719         /* Sequence from 11.7.10 */
720         LCCR3 = fbi->reg_lccr3;
721         LCCR2 = fbi->reg_lccr2;
722         LCCR1 = fbi->reg_lccr1;
723         LCCR0 = fbi->reg_lccr0 & ~LCCR0_ENB;
724
725         FDADR0 = fbi->fdadr0;
726         FDADR1 = fbi->fdadr1;
727         LCCR0 |= LCCR0_ENB;
728
729         DPRINTK("FDADR0 0x%08x\n", (unsigned int) FDADR0);
730         DPRINTK("FDADR1 0x%08x\n", (unsigned int) FDADR1);
731         DPRINTK("LCCR0 0x%08x\n", (unsigned int) LCCR0);
732         DPRINTK("LCCR1 0x%08x\n", (unsigned int) LCCR1);
733         DPRINTK("LCCR2 0x%08x\n", (unsigned int) LCCR2);
734         DPRINTK("LCCR3 0x%08x\n", (unsigned int) LCCR3);
735 }
736
737 static void pxafb_disable_controller(struct pxafb_info *fbi)
738 {
739         DECLARE_WAITQUEUE(wait, current);
740
741         DPRINTK("Disabling LCD controller\n");
742
743         set_current_state(TASK_UNINTERRUPTIBLE);
744         add_wait_queue(&fbi->ctrlr_wait, &wait);
745
746         LCSR = 0xffffffff;      /* Clear LCD Status Register */
747         LCCR0 &= ~LCCR0_LDM;    /* Enable LCD Disable Done Interrupt */
748         LCCR0 |= LCCR0_DIS;     /* Disable LCD Controller */
749
750         schedule_timeout(20 * HZ / 1000);
751         remove_wait_queue(&fbi->ctrlr_wait, &wait);
752 }
753
754 /*
755  *  pxafb_handle_irq: Handle 'LCD DONE' interrupts.
756  */
757 static irqreturn_t pxafb_handle_irq(int irq, void *dev_id, struct pt_regs *regs)
758 {
759         struct pxafb_info *fbi = dev_id;
760         unsigned int lcsr = LCSR;
761
762         if (lcsr & LCSR_LDD) {
763                 LCCR0 |= LCCR0_LDM;
764                 wake_up(&fbi->ctrlr_wait);
765         }
766
767         LCSR = lcsr;
768         return IRQ_HANDLED;
769 }
770
771 /*
772  * This function must be called from task context only, since it will
773  * sleep when disabling the LCD controller, or if we get two contending
774  * processes trying to alter state.
775  */
776 static void set_ctrlr_state(struct pxafb_info *fbi, u_int state)
777 {
778         u_int old_state;
779
780         down(&fbi->ctrlr_sem);
781
782         old_state = fbi->state;
783
784         /*
785          * Hack around fbcon initialisation.
786          */
787         if (old_state == C_STARTUP && state == C_REENABLE)
788                 state = C_ENABLE;
789
790         switch (state) {
791         case C_DISABLE_CLKCHANGE:
792                 /*
793                  * Disable controller for clock change.  If the
794                  * controller is already disabled, then do nothing.
795                  */
796                 if (old_state != C_DISABLE && old_state != C_DISABLE_PM) {
797                         fbi->state = state;
798                         //TODO __pxafb_lcd_power(fbi, 0);
799                         pxafb_disable_controller(fbi);
800                 }
801                 break;
802
803         case C_DISABLE_PM:
804         case C_DISABLE:
805                 /*
806                  * Disable controller
807                  */
808                 if (old_state != C_DISABLE) {
809                         fbi->state = state;
810                         __pxafb_backlight_power(fbi, 0);
811                         __pxafb_lcd_power(fbi, 0);
812                         if (old_state != C_DISABLE_CLKCHANGE)
813                                 pxafb_disable_controller(fbi);
814                 }
815                 break;
816
817         case C_ENABLE_CLKCHANGE:
818                 /*
819                  * Enable the controller after clock change.  Only
820                  * do this if we were disabled for the clock change.
821                  */
822                 if (old_state == C_DISABLE_CLKCHANGE) {
823                         fbi->state = C_ENABLE;
824                         pxafb_enable_controller(fbi);
825                         //TODO __pxafb_lcd_power(fbi, 1);
826                 }
827                 break;
828
829         case C_REENABLE:
830                 /*
831                  * Re-enable the controller only if it was already
832                  * enabled.  This is so we reprogram the control
833                  * registers.
834                  */
835                 if (old_state == C_ENABLE) {
836                         pxafb_disable_controller(fbi);
837                         pxafb_setup_gpio(fbi);
838                         pxafb_enable_controller(fbi);
839                 }
840                 break;
841
842         case C_ENABLE_PM:
843                 /*
844                  * Re-enable the controller after PM.  This is not
845                  * perfect - think about the case where we were doing
846                  * a clock change, and we suspended half-way through.
847                  */
848                 if (old_state != C_DISABLE_PM)
849                         break;
850                 /* fall through */
851
852         case C_ENABLE:
853                 /*
854                  * Power up the LCD screen, enable controller, and
855                  * turn on the backlight.
856                  */
857                 if (old_state != C_ENABLE) {
858                         fbi->state = C_ENABLE;
859                         pxafb_setup_gpio(fbi);
860                         pxafb_enable_controller(fbi);
861                         __pxafb_lcd_power(fbi, 1);
862                         __pxafb_backlight_power(fbi, 1);
863                 }
864                 break;
865         }
866         up(&fbi->ctrlr_sem);
867 }
868
869 /*
870  * Our LCD controller task (which is called when we blank or unblank)
871  * via keventd.
872  */
873 static void pxafb_task(void *dummy)
874 {
875         struct pxafb_info *fbi = dummy;
876         u_int state = xchg(&fbi->task_state, -1);
877
878         set_ctrlr_state(fbi, state);
879 }
880
881 #ifdef CONFIG_CPU_FREQ
882 /*
883  * CPU clock speed change handler.  We need to adjust the LCD timing
884  * parameters when the CPU clock is adjusted by the power management
885  * subsystem.
886  *
887  * TODO: Determine why f->new != 10*get_lclk_frequency_10khz()
888  */
889 static int
890 pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data)
891 {
892         struct pxafb_info *fbi = TO_INF(nb, freq_transition);
893         //TODO struct cpufreq_freqs *f = data;
894         u_int pcd;
895
896         switch (val) {
897         case CPUFREQ_PRECHANGE:
898                 set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
899                 break;
900
901         case CPUFREQ_POSTCHANGE:
902                 pcd = get_pcd(fbi->fb.var.pixclock);
903                 fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd);
904                 set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE);
905                 break;
906         }
907         return 0;
908 }
909
910 static int
911 pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data)
912 {
913         struct pxafb_info *fbi = TO_INF(nb, freq_policy);
914         struct fb_var_screeninfo *var = &fbi->fb.var;
915         struct cpufreq_policy *policy = data;
916
917         switch (val) {
918         case CPUFREQ_ADJUST:
919         case CPUFREQ_INCOMPATIBLE:
920                 printk(KERN_DEBUG "min dma period: %d ps, "
921                         "new clock %d kHz\n", pxafb_display_dma_period(var),
922                         policy->max);
923                 // TODO: fill in min/max values
924                 break;
925 #if 0
926         case CPUFREQ_NOTIFY:
927                 printk(KERN_ERR "%s: got CPUFREQ_NOTIFY\n", __FUNCTION__);
928                 do {} while(0);
929                 /* todo: panic if min/max values aren't fulfilled
930                  * [can't really happen unless there's a bug in the
931                  * CPU policy verification process *
932                  */
933                 break;
934 #endif
935         }
936         return 0;
937 }
938 #endif
939
940 #ifdef CONFIG_PM
941 /*
942  * Power management hooks.  Note that we won't be called from IRQ context,
943  * unlike the blank functions above, so we may sleep.
944  */
945 static int pxafb_suspend(struct device *dev, u32 state, u32 level)
946 {
947         struct pxafb_info *fbi = dev_get_drvdata(dev);
948
949         if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN)
950                 set_ctrlr_state(fbi, C_DISABLE_PM);
951         return 0;
952 }
953
954 static int pxafb_resume(struct device *dev, u32 level)
955 {
956         struct pxafb_info *fbi = dev_get_drvdata(dev);
957
958         if (level == RESUME_ENABLE)
959                 set_ctrlr_state(fbi, C_ENABLE_PM);
960         return 0;
961 }
962 #else
963 #define pxafb_suspend   NULL
964 #define pxafb_resume    NULL
965 #endif
966
967 /*
968  * pxafb_map_video_memory():
969  *      Allocates the DRAM memory for the frame buffer.  This buffer is
970  *      remapped into a non-cached, non-buffered, memory region to
971  *      allow palette and pixel writes to occur without flushing the
972  *      cache.  Once this area is remapped, all virtual memory
973  *      access to the video memory should occur at the new region.
974  */
975 static int __init pxafb_map_video_memory(struct pxafb_info *fbi)
976 {
977         u_long palette_mem_size;
978
979         /*
980          * We reserve one page for the palette, plus the size
981          * of the framebuffer.
982          */
983         fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE);
984         fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size,
985                                               &fbi->map_dma, GFP_KERNEL);
986
987         if (fbi->map_cpu) {
988                 /* prevent initial garbage on screen */
989                 memset(fbi->map_cpu, 0, fbi->map_size);
990                 fbi->fb.screen_base = fbi->map_cpu + PAGE_SIZE;
991                 fbi->screen_dma = fbi->map_dma + PAGE_SIZE;
992                 /*
993                  * FIXME: this is actually the wrong thing to place in
994                  * smem_start.  But fbdev suffers from the problem that
995                  * it needs an API which doesn't exist (in this case,
996                  * dma_writecombine_mmap)
997                  */
998                 fbi->fb.fix.smem_start = fbi->screen_dma;
999
1000                 fbi->palette_size = fbi->fb.var.bits_per_pixel == 8 ? 256 : 16;
1001
1002                 palette_mem_size = fbi->palette_size * sizeof(u16);
1003                 DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
1004
1005                 fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
1006                 fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
1007         }
1008
1009         return fbi->map_cpu ? 0 : -ENOMEM;
1010 }
1011
1012 static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev)
1013 {
1014         struct pxafb_info *fbi;
1015         void *addr;
1016         struct pxafb_mach_info *inf = dev->platform_data;
1017
1018         /* Alloc the pxafb_info and pseudo_palette in one step */
1019         fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL);
1020         if (!fbi)
1021                 return NULL;
1022
1023         memset(fbi, 0, sizeof(struct pxafb_info));
1024         fbi->dev = dev;
1025
1026         strcpy(fbi->fb.fix.id, PXA_NAME);
1027
1028         fbi->fb.fix.type        = FB_TYPE_PACKED_PIXELS;
1029         fbi->fb.fix.type_aux    = 0;
1030         fbi->fb.fix.xpanstep    = 0;
1031         fbi->fb.fix.ypanstep    = 0;
1032         fbi->fb.fix.ywrapstep   = 0;
1033         fbi->fb.fix.accel       = FB_ACCEL_NONE;
1034
1035         fbi->fb.var.nonstd      = 0;
1036         fbi->fb.var.activate    = FB_ACTIVATE_NOW;
1037         fbi->fb.var.height      = -1;
1038         fbi->fb.var.width       = -1;
1039         fbi->fb.var.accel_flags = 0;
1040         fbi->fb.var.vmode       = FB_VMODE_NONINTERLACED;
1041
1042         fbi->fb.fbops           = &pxafb_ops;
1043         fbi->fb.flags           = FBINFO_DEFAULT;
1044         fbi->fb.node            = -1;
1045
1046         addr = fbi;
1047         addr = addr + sizeof(struct pxafb_info);
1048         fbi->fb.pseudo_palette  = addr;
1049
1050         fbi->max_xres                   = inf->xres;
1051         fbi->fb.var.xres                = inf->xres;
1052         fbi->fb.var.xres_virtual        = inf->xres;
1053         fbi->max_yres                   = inf->yres;
1054         fbi->fb.var.yres                = inf->yres;
1055         fbi->fb.var.yres_virtual        = inf->yres;
1056         fbi->max_bpp                    = inf->bpp;
1057         fbi->fb.var.bits_per_pixel      = inf->bpp;
1058         fbi->fb.var.pixclock            = inf->pixclock;
1059         fbi->fb.var.hsync_len           = inf->hsync_len;
1060         fbi->fb.var.left_margin         = inf->left_margin;
1061         fbi->fb.var.right_margin        = inf->right_margin;
1062         fbi->fb.var.vsync_len           = inf->vsync_len;
1063         fbi->fb.var.upper_margin        = inf->upper_margin;
1064         fbi->fb.var.lower_margin        = inf->lower_margin;
1065         fbi->fb.var.sync                = inf->sync;
1066         fbi->fb.var.grayscale           = inf->cmap_greyscale;
1067         fbi->cmap_inverse               = inf->cmap_inverse;
1068         fbi->cmap_static                = inf->cmap_static;
1069         fbi->lccr0                      = inf->lccr0;
1070         fbi->lccr3                      = inf->lccr3;
1071         fbi->state                      = C_STARTUP;
1072         fbi->task_state                 = (u_char)-1;
1073         fbi->fb.fix.smem_len            = fbi->max_xres * fbi->max_yres *
1074                                           fbi->max_bpp / 8;
1075
1076         init_waitqueue_head(&fbi->ctrlr_wait);
1077         INIT_WORK(&fbi->task, pxafb_task, fbi);
1078         init_MUTEX(&fbi->ctrlr_sem);
1079
1080         return fbi;
1081 }
1082
1083 #ifdef CONFIG_FB_PXA_PARAMETERS
1084 static int __init pxafb_parse_options(struct device *dev, char *options)
1085 {
1086         struct pxafb_mach_info *inf = dev->platform_data;
1087         char *this_opt;
1088
1089         if (!options || !*options)
1090                 return 0;
1091
1092         dev_dbg(dev, "options are \"%s\"\n", options ? options : "null");
1093
1094         /* could be made table driven or similar?... */
1095         while ((this_opt = strsep(&options, ",")) != NULL) {
1096                 if (!strncmp(this_opt, "mode:", 5)) {
1097                         const char *name = this_opt+5;
1098                         unsigned int namelen = strlen(name);
1099                         int res_specified = 0, bpp_specified = 0;
1100                         unsigned int xres = 0, yres = 0, bpp = 0;
1101                         int yres_specified = 0;
1102                         int i;
1103                         for (i = namelen-1; i >= 0; i--) {
1104                                 switch (name[i]) {
1105                                 case '-':
1106                                         namelen = i;
1107                                         if (!bpp_specified && !yres_specified) {
1108                                                 bpp = simple_strtoul(&name[i+1], NULL, 0);
1109                                                 bpp_specified = 1;
1110                                         } else
1111                                                 goto done;
1112                                         break;
1113                                 case 'x':
1114                                         if (!yres_specified) {
1115                                                 yres = simple_strtoul(&name[i+1], NULL, 0);
1116                                                 yres_specified = 1;
1117                                         } else
1118                                                 goto done;
1119                                         break;
1120                                 case '0'...'9':
1121                                         break;
1122                                 default:
1123                                         goto done;
1124                                 }
1125                         }
1126                         if (i < 0 && yres_specified) {
1127                                 xres = simple_strtoul(name, NULL, 0);
1128                                 res_specified = 1;
1129                         }
1130                 done:
1131                         if (res_specified) {
1132                                 dev_info(dev, "overriding resolution: %dx%d\n", xres, yres);
1133                                 inf->xres = xres; inf->yres = yres;
1134                         }
1135                         if (bpp_specified)
1136                                 switch (bpp) {
1137                                 case 1:
1138                                 case 2:
1139                                 case 4:
1140                                 case 8:
1141                                 case 16:
1142                                         inf->bpp = bpp;
1143                                         dev_info(dev, "overriding bit depth: %d\n", bpp);
1144                                         break;
1145                                 default:
1146                                         dev_err(dev, "Depth %d is not valid\n", bpp);
1147                                 }
1148                 } else if (!strncmp(this_opt, "pixclock:", 9)) {
1149                         inf->pixclock = simple_strtoul(this_opt+9, NULL, 0);
1150                         dev_info(dev, "override pixclock: %ld\n", inf->pixclock);
1151                 } else if (!strncmp(this_opt, "left:", 5)) {
1152                         inf->left_margin = simple_strtoul(this_opt+5, NULL, 0);
1153                         dev_info(dev, "override left: %u\n", inf->left_margin);
1154                 } else if (!strncmp(this_opt, "right:", 6)) {
1155                         inf->right_margin = simple_strtoul(this_opt+6, NULL, 0);
1156                         dev_info(dev, "override right: %u\n", inf->right_margin);
1157                 } else if (!strncmp(this_opt, "upper:", 6)) {
1158                         inf->upper_margin = simple_strtoul(this_opt+6, NULL, 0);
1159                         dev_info(dev, "override upper: %u\n", inf->upper_margin);
1160                 } else if (!strncmp(this_opt, "lower:", 6)) {
1161                         inf->lower_margin = simple_strtoul(this_opt+6, NULL, 0);
1162                         dev_info(dev, "override lower: %u\n", inf->lower_margin);
1163                 } else if (!strncmp(this_opt, "hsynclen:", 9)) {
1164                         inf->hsync_len = simple_strtoul(this_opt+9, NULL, 0);
1165                         dev_info(dev, "override hsynclen: %u\n", inf->hsync_len);
1166                 } else if (!strncmp(this_opt, "vsynclen:", 9)) {
1167                         inf->vsync_len = simple_strtoul(this_opt+9, NULL, 0);
1168                         dev_info(dev, "override vsynclen: %u\n", inf->vsync_len);
1169                 } else if (!strncmp(this_opt, "hsync:", 6)) {
1170                         if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
1171                                 dev_info(dev, "override hsync: Active Low\n");
1172                                 inf->sync &= ~FB_SYNC_HOR_HIGH_ACT;
1173                         } else {
1174                                 dev_info(dev, "override hsync: Active High\n");
1175                                 inf->sync |= FB_SYNC_HOR_HIGH_ACT;
1176                         }
1177                 } else if (!strncmp(this_opt, "vsync:", 6)) {
1178                         if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
1179                                 dev_info(dev, "override vsync: Active Low\n");
1180                                 inf->sync &= ~FB_SYNC_VERT_HIGH_ACT;
1181                         } else {
1182                                 dev_info(dev, "override vsync: Active High\n");
1183                                 inf->sync |= FB_SYNC_VERT_HIGH_ACT;
1184                         }
1185                 } else if (!strncmp(this_opt, "dpc:", 4)) {
1186                         if (simple_strtoul(this_opt+4, NULL, 0) == 0) {
1187                                 dev_info(dev, "override double pixel clock: false\n");
1188                                 inf->lccr3 &= ~LCCR3_DPC;
1189                         } else {
1190                                 dev_info(dev, "override double pixel clock: true\n");
1191                                 inf->lccr3 |= LCCR3_DPC;
1192                         }
1193                 } else if (!strncmp(this_opt, "outputen:", 9)) {
1194                         if (simple_strtoul(this_opt+9, NULL, 0) == 0) {
1195                                 dev_info(dev, "override output enable: active low\n");
1196                                 inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnL;
1197                         } else {
1198                                 dev_info(dev, "override output enable: active high\n");
1199                                 inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnH;
1200                         }
1201                 } else if (!strncmp(this_opt, "pixclockpol:", 12)) {
1202                         if (simple_strtoul(this_opt+12, NULL, 0) == 0) {
1203                                 dev_info(dev, "override pixel clock polarity: falling edge\n");
1204                                 inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixFlEdg;
1205                         } else {
1206                                 dev_info(dev, "override pixel clock polarity: rising edge\n");
1207                                 inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixRsEdg;
1208                         }
1209                 } else if (!strncmp(this_opt, "color", 5)) {
1210                         inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Color;
1211                 } else if (!strncmp(this_opt, "mono", 4)) {
1212                         inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Mono;
1213                 } else if (!strncmp(this_opt, "active", 6)) {
1214                         inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Act;
1215                 } else if (!strncmp(this_opt, "passive", 7)) {
1216                         inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Pas;
1217                 } else if (!strncmp(this_opt, "single", 6)) {
1218                         inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Sngl;
1219                 } else if (!strncmp(this_opt, "dual", 4)) {
1220                         inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Dual;
1221                 } else if (!strncmp(this_opt, "4pix", 4)) {
1222                         inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_4PixMono;
1223                 } else if (!strncmp(this_opt, "8pix", 4)) {
1224                         inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_8PixMono;
1225                 } else {
1226                         dev_err(dev, "unknown option: %s\n", this_opt);
1227                         return -EINVAL;
1228                 }
1229         }
1230         return 0;
1231
1232 }
1233 #endif
1234
1235 int __init pxafb_probe(struct device *dev)
1236 {
1237         struct pxafb_info *fbi;
1238         struct pxafb_mach_info *inf;
1239         int ret;
1240
1241         dev_dbg(dev, "pxafb_probe\n");
1242
1243         inf = dev->platform_data;
1244         ret = -ENOMEM;
1245         fbi = NULL;
1246         if (!inf)
1247                 goto failed;
1248
1249 #ifdef CONFIG_FB_PXA_PARAMETERS
1250         ret = pxafb_parse_options(dev, g_options);
1251         if (ret < 0)
1252                 goto failed;
1253 #endif
1254
1255 #ifdef DEBUG_VAR
1256         /* Check for various illegal bit-combinations. Currently only
1257          * a warning is given. */
1258
1259         if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
1260                 dev_warn(dev, "machine LCCR0 setting contains illegal bits: %08x\n",
1261                         inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
1262         if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
1263                 dev_warn(dev, "machine LCCR3 setting contains illegal bits: %08x\n",
1264                         inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
1265         if (inf->lccr0 & LCCR0_DPD &&
1266             ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
1267              (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
1268              (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
1269                 dev_warn(dev, "Double Pixel Data (DPD) mode is only valid in passive mono"
1270                          " single panel mode\n");
1271         if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
1272             (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
1273                 dev_warn(dev, "Dual panel only valid in passive mode\n");
1274         if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
1275              (inf->upper_margin || inf->lower_margin))
1276                 dev_warn(dev, "Upper and lower margins must be 0 in passive mode\n");
1277 #endif
1278
1279         dev_dbg(dev, "got a %dx%dx%d LCD\n",inf->xres, inf->yres, inf->bpp);
1280         if (inf->xres == 0 || inf->yres == 0 || inf->bpp == 0) {
1281                 dev_err(dev, "Invalid resolution or bit depth\n");
1282                 ret = -EINVAL;
1283                 goto failed;
1284         }
1285         pxafb_backlight_power = inf->pxafb_backlight_power;
1286         pxafb_lcd_power = inf->pxafb_lcd_power;
1287         fbi = pxafb_init_fbinfo(dev);
1288         if (!fbi) {
1289                 dev_err(dev, "Failed to initialize framebuffer device\n");
1290                 ret = -ENOMEM; // only reason for pxafb_init_fbinfo to fail is kmalloc
1291                 goto failed;
1292         }
1293
1294         /* Initialize video memory */
1295         ret = pxafb_map_video_memory(fbi);
1296         if (ret) {
1297                 dev_err(dev, "Failed to allocate video RAM: %d\n", ret);
1298                 ret = -ENOMEM;
1299                 goto failed;
1300         }
1301         /* enable LCD controller clock */
1302         pxa_set_cken(CKEN16_LCD, 1);
1303
1304         ret = request_irq(IRQ_LCD, pxafb_handle_irq, SA_INTERRUPT, "LCD", fbi);
1305         if (ret) {
1306                 dev_err(dev, "request_irq failed: %d\n", ret);
1307                 ret = -EBUSY;
1308                 goto failed;
1309         }
1310
1311         /*
1312          * This makes sure that our colour bitfield
1313          * descriptors are correctly initialised.
1314          */
1315         pxafb_check_var(&fbi->fb.var, &fbi->fb);
1316         pxafb_set_par(&fbi->fb);
1317
1318         dev_set_drvdata(dev, fbi);
1319
1320         ret = register_framebuffer(&fbi->fb);
1321         if (ret < 0) {
1322                 dev_err(dev, "Failed to register framebuffer device: %d\n", ret);
1323                 goto failed;
1324         }
1325
1326 #ifdef CONFIG_PM
1327         // TODO
1328 #endif
1329
1330 #ifdef CONFIG_CPU_FREQ
1331         fbi->freq_transition.notifier_call = pxafb_freq_transition;
1332         fbi->freq_policy.notifier_call = pxafb_freq_policy;
1333         cpufreq_register_notifier(&fbi->freq_transition, CPUFREQ_TRANSITION_NOTIFIER);
1334         cpufreq_register_notifier(&fbi->freq_policy, CPUFREQ_POLICY_NOTIFIER);
1335 #endif
1336
1337         /*
1338          * Ok, now enable the LCD controller
1339          */
1340         set_ctrlr_state(fbi, C_ENABLE);
1341
1342         return 0;
1343
1344 failed:
1345         dev_set_drvdata(dev, NULL);
1346         kfree(fbi);
1347         return ret;
1348 }
1349
1350 static struct device_driver pxafb_driver = {
1351         .name           = "pxa2xx-fb",
1352         .bus            = &platform_bus_type,
1353         .probe          = pxafb_probe,
1354 #ifdef CONFIG_PM
1355         .suspend        = pxafb_suspend,
1356         .resume         = pxafb_resume,
1357 #endif
1358 };
1359
1360 #ifndef MODULE
1361 int __devinit pxafb_setup(char *options)
1362 {
1363 # ifdef CONFIG_FB_PXA_PARAMETERS
1364         strlcpy(g_options, options, sizeof(g_options));
1365 # endif
1366         return 0;
1367 }
1368 #else
1369 # ifdef CONFIG_FB_PXA_PARAMETERS
1370 module_param_string(options, g_options, sizeof(g_options), 0);
1371 MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
1372 # endif
1373 #endif
1374
1375 int __devinit pxafb_init(void)
1376 {
1377 #ifndef MODULE
1378         char *option = NULL;
1379
1380         if (fb_get_options("pxafb", &option))
1381                 return -ENODEV;
1382         pxafb_setup(option);
1383 #endif
1384         return driver_register(&pxafb_driver);
1385 }
1386
1387 module_init(pxafb_init);
1388
1389 MODULE_DESCRIPTION("loadable framebuffer driver for PXA");
1390 MODULE_LICENSE("GPL");