drivers/video/fbdev/gbefb.c

   1 /*
   2  *  SGI GBE frame buffer driver
   3  *
   4  *  Copyright (C) 1999 Silicon Graphics, Inc. - Jeffrey Newquist
   5  *  Copyright (C) 2002 Vivien Chappelier <vivien.chappelier@linux-mips.org>
   6  *
   7  *  This file is subject to the terms and conditions of the GNU General Public
   8  *  License. See the file COPYING in the main directory of this archive for
   9  *  more details.
  10  */
  11
  12 #include <linux/delay.h>
  13 #include <linux/platform_device.h>
  14 #include <linux/dma-mapping.h>
  15 #include <linux/errno.h>
  16 #include <linux/gfp.h>
  17 #include <linux/fb.h>
  18 #include <linux/init.h>
  19 #include <linux/interrupt.h>
  20 #include <linux/kernel.h>
  21 #include <linux/mm.h>
  22 #include <linux/module.h>
  23 #include <linux/io.h>
  24
  25 #ifdef CONFIG_X86
  26 #include <asm/mtrr.h>
  27 #endif
  28 #ifdef CONFIG_MIPS
  29 #include <asm/addrspace.h>
  30 #endif
  31 #include <asm/byteorder.h>
  32 #include <asm/tlbflush.h>
  33
  34 #include <video/gbe.h>
  35
  36 static struct sgi_gbe *gbe;
  37
  38 struct gbefb_par {
  39         struct fb_var_screeninfo var;
  40         struct gbe_timing_info timing;
  41         int valid;
  42 };
  43
  44 #ifdef CONFIG_SGI_IP32
  45 #define GBE_BASE        0x16000000 /* SGI O2 */
  46 #endif
  47
  48 /* macro for fastest write-though access to the framebuffer */
  49 #ifdef CONFIG_MIPS
  50 #ifdef CONFIG_CPU_R10000
  51 #define pgprot_fb(_prot) (((_prot) & (~_CACHE_MASK)) | _CACHE_UNCACHED_ACCELERATED)
  52 #else
  53 #define pgprot_fb(_prot) (((_prot) & (~_CACHE_MASK)) | _CACHE_CACHABLE_NO_WA)
  54 #endif
  55 #endif
  56 #ifdef CONFIG_X86
  57 #define pgprot_fb(_prot) ((_prot) | _PAGE_PCD)
  58 #endif
  59
  60 /*
  61  *  RAM we reserve for the frame buffer. This defines the maximum screen
  62  *  size
  63  */
  64 #if CONFIG_FB_GBE_MEM > 8
  65 #error GBE Framebuffer cannot use more than 8MB of memory
  66 #endif
  67
  68 #define TILE_SHIFT 16
  69 #define TILE_SIZE (1 << TILE_SHIFT)
  70 #define TILE_MASK (TILE_SIZE - 1)
  71
  72 static unsigned int gbe_mem_size = CONFIG_FB_GBE_MEM * 1024*1024;
  73 static void *gbe_mem;
  74 static dma_addr_t gbe_dma_addr;
  75 static unsigned long gbe_mem_phys;
  76
  77 static struct {
  78         uint16_t *cpu;
  79         dma_addr_t dma;
  80 } gbe_tiles;
  81
  82 static int gbe_revision;
  83
  84 static int ypan, ywrap;
  85
  86 static uint32_t pseudo_palette[16];
  87 static uint32_t gbe_cmap[256];
  88 static int gbe_turned_on; /* 0 turned off, 1 turned on */
  89
  90 static char *mode_option = NULL;
  91
  92 /* default CRT mode */
  93 static struct fb_var_screeninfo default_var_CRT = {
  94         /* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
  95         .xres           = 640,
  96         .yres           = 480,
  97         .xres_virtual   = 640,
  98         .yres_virtual   = 480,
  99         .xoffset        = 0,
 100         .yoffset        = 0,
 101         .bits_per_pixel = 8,
 102         .grayscale      = 0,
 103         .red            = { 0, 8, 0 },
 104         .green          = { 0, 8, 0 },
 105         .blue           = { 0, 8, 0 },
 106         .transp         = { 0, 0, 0 },
 107         .nonstd         = 0,
 108         .activate       = 0,
 109         .height         = -1,
 110         .width          = -1,
 111         .accel_flags    = 0,
 112         .pixclock       = 39722,        /* picoseconds */
 113         .left_margin    = 48,
 114         .right_margin   = 16,
 115         .upper_margin   = 33,
 116         .lower_margin   = 10,
 117         .hsync_len      = 96,
 118         .vsync_len      = 2,
 119         .sync           = 0,
 120         .vmode          = FB_VMODE_NONINTERLACED,
 121 };
 122
 123 /* default LCD mode */
 124 static struct fb_var_screeninfo default_var_LCD = {
 125         /* 1600x1024, 8 bpp */
 126         .xres           = 1600,
 127         .yres           = 1024,
 128         .xres_virtual   = 1600,
 129         .yres_virtual   = 1024,
 130         .xoffset        = 0,
 131         .yoffset        = 0,
 132         .bits_per_pixel = 8,
 133         .grayscale      = 0,
 134         .red            = { 0, 8, 0 },
 135         .green          = { 0, 8, 0 },
 136         .blue           = { 0, 8, 0 },
 137         .transp         = { 0, 0, 0 },
 138         .nonstd         = 0,
 139         .activate       = 0,
 140         .height         = -1,
 141         .width          = -1,
 142         .accel_flags    = 0,
 143         .pixclock       = 9353,
 144         .left_margin    = 20,
 145         .right_margin   = 30,
 146         .upper_margin   = 37,
 147         .lower_margin   = 3,
 148         .hsync_len      = 20,
 149         .vsync_len      = 3,
 150         .sync           = 0,
 151         .vmode          = FB_VMODE_NONINTERLACED
 152 };
 153
 154 /* default modedb mode */
 155 /* 640x480, 60 Hz, Non-Interlaced (25.172 MHz dotclock) */
 156 static struct fb_videomode default_mode_CRT = {
 157         .refresh        = 60,
 158         .xres           = 640,
 159         .yres           = 480,
 160         .pixclock       = 39722,
 161         .left_margin    = 48,
 162         .right_margin   = 16,
 163         .upper_margin   = 33,
 164         .lower_margin   = 10,
 165         .hsync_len      = 96,
 166         .vsync_len      = 2,
 167         .sync           = 0,
 168         .vmode          = FB_VMODE_NONINTERLACED,
 169 };
 170 /* 1600x1024 SGI flatpanel 1600sw */
 171 static struct fb_videomode default_mode_LCD = {
 172         /* 1600x1024, 8 bpp */
 173         .xres           = 1600,
 174         .yres           = 1024,
 175         .pixclock       = 9353,
 176         .left_margin    = 20,
 177         .right_margin   = 30,
 178         .upper_margin   = 37,
 179         .lower_margin   = 3,
 180         .hsync_len      = 20,
 181         .vsync_len      = 3,
 182         .vmode          = FB_VMODE_NONINTERLACED,
 183 };
 184
 185 static struct fb_videomode *default_mode = &default_mode_CRT;
 186 static struct fb_var_screeninfo *default_var = &default_var_CRT;
 187
 188 static int flat_panel_enabled = 0;
 189
 190 static void gbe_reset(void)
 191 {
 192         /* Turn on dotclock PLL */
 193         gbe->ctrlstat = 0x300aa000;
 194 }
 195
 196
 197 /*
 198  * Function:    gbe_turn_off
 199  * Parameters:  (None)
 200  * Description: This should turn off the monitor and gbe.  This is used
 201  *              when switching between the serial console and the graphics
 202  *              console.
 203  */
 204
 205 static void gbe_turn_off(void)
 206 {
 207         int i;
 208         unsigned int val, x, y, vpixen_off;
 209
 210         gbe_turned_on = 0;
 211
 212         /* check if pixel counter is on */
 213         val = gbe->vt_xy;
 214         if (GET_GBE_FIELD(VT_XY, FREEZE, val) == 1)
 215                 return;
 216
 217         /* turn off DMA */
 218         val = gbe->ovr_control;
 219         SET_GBE_FIELD(OVR_CONTROL, OVR_DMA_ENABLE, val, 0);
 220         gbe->ovr_control = val;
 221         udelay(1000);
 222         val = gbe->frm_control;
 223         SET_GBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, val, 0);
 224         gbe->frm_control = val;
 225         udelay(1000);
 226         val = gbe->did_control;
 227         SET_GBE_FIELD(DID_CONTROL, DID_DMA_ENABLE, val, 0);
 228         gbe->did_control = val;
 229         udelay(1000);
 230
 231         /* We have to wait through two vertical retrace periods before
 232          * the pixel DMA is turned off for sure. */
 233         for (i = 0; i < 10000; i++) {
 234                 val = gbe->frm_inhwctrl;
 235                 if (GET_GBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, val)) {
 236                         udelay(10);
 237                 } else {
 238                         val = gbe->ovr_inhwctrl;
 239                         if (GET_GBE_FIELD(OVR_INHWCTRL, OVR_DMA_ENABLE, val)) {
 240                                 udelay(10);
 241                         } else {
 242                                 val = gbe->did_inhwctrl;
 243                                 if (GET_GBE_FIELD(DID_INHWCTRL, DID_DMA_ENABLE, val)) {
 244                                         udelay(10);
 245                                 } else
 246                                         break;
 247                         }
 248                 }
 249         }
 250         if (i == 10000)
 251                 printk(KERN_ERR "gbefb: turn off DMA timed out\n");
 252
 253         /* wait for vpixen_off */
 254         val = gbe->vt_vpixen;
 255         vpixen_off = GET_GBE_FIELD(VT_VPIXEN, VPIXEN_OFF, val);
 256
 257         for (i = 0; i < 100000; i++) {
 258                 val = gbe->vt_xy;
 259                 x = GET_GBE_FIELD(VT_XY, X, val);
 260                 y = GET_GBE_FIELD(VT_XY, Y, val);
 261                 if (y < vpixen_off)
 262                         break;
 263                 udelay(1);
 264         }
 265         if (i == 100000)
 266                 printk(KERN_ERR
 267                        "gbefb: wait for vpixen_off timed out\n");
 268         for (i = 0; i < 10000; i++) {
 269                 val = gbe->vt_xy;
 270                 x = GET_GBE_FIELD(VT_XY, X, val);
 271                 y = GET_GBE_FIELD(VT_XY, Y, val);
 272                 if (y > vpixen_off)
 273                         break;
 274                 udelay(1);
 275         }
 276         if (i == 10000)
 277                 printk(KERN_ERR "gbefb: wait for vpixen_off timed out\n");
 278
 279         /* turn off pixel counter */
 280         val = 0;
 281         SET_GBE_FIELD(VT_XY, FREEZE, val, 1);
 282         gbe->vt_xy = val;
 283         udelay(10000);
 284         for (i = 0; i < 10000; i++) {
 285                 val = gbe->vt_xy;
 286                 if (GET_GBE_FIELD(VT_XY, FREEZE, val) != 1)
 287                         udelay(10);
 288                 else
 289                         break;
 290         }
 291         if (i == 10000)
 292                 printk(KERN_ERR "gbefb: turn off pixel clock timed out\n");
 293
 294         /* turn off dot clock */
 295         val = gbe->dotclock;
 296         SET_GBE_FIELD(DOTCLK, RUN, val, 0);
 297         gbe->dotclock = val;
 298         udelay(10000);
 299         for (i = 0; i < 10000; i++) {
 300                 val = gbe->dotclock;
 301                 if (GET_GBE_FIELD(DOTCLK, RUN, val))
 302                         udelay(10);
 303                 else
 304                         break;
 305         }
 306         if (i == 10000)
 307                 printk(KERN_ERR "gbefb: turn off dotclock timed out\n");
 308
 309         /* reset the frame DMA FIFO */
 310         val = gbe->frm_size_tile;
 311         SET_GBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, val, 1);
 312         gbe->frm_size_tile = val;
 313         SET_GBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, val, 0);
 314         gbe->frm_size_tile = val;
 315 }
 316
 317 static void gbe_turn_on(void)
 318 {
 319         unsigned int val, i;
 320
 321         /*
 322          * Check if pixel counter is off, for unknown reason this
 323          * code hangs Visual Workstations
 324          */
 325         if (gbe_revision < 2) {
 326                 val = gbe->vt_xy;
 327                 if (GET_GBE_FIELD(VT_XY, FREEZE, val) == 0)
 328                         return;
 329         }
 330
 331         /* turn on dot clock */
 332         val = gbe->dotclock;
 333         SET_GBE_FIELD(DOTCLK, RUN, val, 1);
 334         gbe->dotclock = val;
 335         udelay(10000);
 336         for (i = 0; i < 10000; i++) {
 337                 val = gbe->dotclock;
 338                 if (GET_GBE_FIELD(DOTCLK, RUN, val) != 1)
 339                         udelay(10);
 340                 else
 341                         break;
 342         }
 343         if (i == 10000)
 344                 printk(KERN_ERR "gbefb: turn on dotclock timed out\n");
 345
 346         /* turn on pixel counter */
 347         val = 0;
 348         SET_GBE_FIELD(VT_XY, FREEZE, val, 0);
 349         gbe->vt_xy = val;
 350         udelay(10000);
 351         for (i = 0; i < 10000; i++) {
 352                 val = gbe->vt_xy;
 353                 if (GET_GBE_FIELD(VT_XY, FREEZE, val))
 354                         udelay(10);
 355                 else
 356                         break;
 357         }
 358         if (i == 10000)
 359                 printk(KERN_ERR "gbefb: turn on pixel clock timed out\n");
 360
 361         /* turn on DMA */
 362         val = gbe->frm_control;
 363         SET_GBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, val, 1);
 364         gbe->frm_control = val;
 365         udelay(1000);
 366         for (i = 0; i < 10000; i++) {
 367                 val = gbe->frm_inhwctrl;
 368                 if (GET_GBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, val) != 1)
 369                         udelay(10);
 370                 else
 371                         break;
 372         }
 373         if (i == 10000)
 374                 printk(KERN_ERR "gbefb: turn on DMA timed out\n");
 375
 376         gbe_turned_on = 1;
 377 }
 378
 379 static void gbe_loadcmap(void)
 380 {
 381         int i, j;
 382
 383         for (i = 0; i < 256; i++) {
 384                 for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++)
 385                         udelay(10);
 386                 if (j == 1000)
 387                         printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
 388
 389                 gbe->cmap[i] = gbe_cmap[i];
 390         }
 391 }
 392
 393 /*
 394  *  Blank the display.
 395  */
 396 static int gbefb_blank(int blank, struct fb_info *info)
 397 {
 398         /* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */
 399         switch (blank) {
 400         case FB_BLANK_UNBLANK:          /* unblank */
 401                 gbe_turn_on();
 402                 gbe_loadcmap();
 403                 break;
 404
 405         case FB_BLANK_NORMAL:           /* blank */
 406                 gbe_turn_off();
 407                 break;
 408
 409         default:
 410                 /* Nothing */
 411                 break;
 412         }
 413         return 0;
 414 }
 415
 416 /*
 417  *  Setup flatpanel related registers.
 418  */
 419 static void gbefb_setup_flatpanel(struct gbe_timing_info *timing)
 420 {
 421         int fp_wid, fp_hgt, fp_vbs, fp_vbe;
 422         u32 outputVal = 0;
 423
 424         SET_GBE_FIELD(VT_FLAGS, HDRV_INVERT, outputVal,
 425                 (timing->flags & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1);
 426         SET_GBE_FIELD(VT_FLAGS, VDRV_INVERT, outputVal,
 427                 (timing->flags & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1);
 428         gbe->vt_flags = outputVal;
 429
 430         /* Turn on the flat panel */
 431         fp_wid = 1600;
 432         fp_hgt = 1024;
 433         fp_vbs = 0;
 434         fp_vbe = 1600;
 435         timing->pll_m = 4;
 436         timing->pll_n = 1;
 437         timing->pll_p = 0;
 438
 439         outputVal = 0;
 440         SET_GBE_FIELD(FP_DE, ON, outputVal, fp_vbs);
 441         SET_GBE_FIELD(FP_DE, OFF, outputVal, fp_vbe);
 442         gbe->fp_de = outputVal;
 443         outputVal = 0;
 444         SET_GBE_FIELD(FP_HDRV, OFF, outputVal, fp_wid);
 445         gbe->fp_hdrv = outputVal;
 446         outputVal = 0;
 447         SET_GBE_FIELD(FP_VDRV, ON, outputVal, 1);
 448         SET_GBE_FIELD(FP_VDRV, OFF, outputVal, fp_hgt + 1);
 449         gbe->fp_vdrv = outputVal;
 450 }
 451
 452 struct gbe_pll_info {
 453         int clock_rate;
 454         int fvco_min;
 455         int fvco_max;
 456 };
 457
 458 static struct gbe_pll_info gbe_pll_table[2] = {
 459         { 20, 80, 220 },
 460         { 27, 80, 220 },
 461 };
 462
 463 static int compute_gbe_timing(struct fb_var_screeninfo *var,
 464                               struct gbe_timing_info *timing)
 465 {
 466         int pll_m, pll_n, pll_p, error, best_m, best_n, best_p, best_error;
 467         int pixclock;
 468         struct gbe_pll_info *gbe_pll;
 469
 470         if (gbe_revision < 2)
 471                 gbe_pll = &gbe_pll_table[0];
 472         else
 473                 gbe_pll = &gbe_pll_table[1];
 474
 475         /* Determine valid resolution and timing
 476          * GBE crystal runs at 20Mhz or 27Mhz
 477          * pll_m, pll_n, pll_p define the following frequencies
 478          * fvco = pll_m * 20Mhz / pll_n
 479          * fout = fvco / (2**pll_p) */
 480         best_error = 1000000000;
 481         best_n = best_m = best_p = 0;
 482         for (pll_p = 0; pll_p < 4; pll_p++)
 483                 for (pll_m = 1; pll_m < 256; pll_m++)
 484                         for (pll_n = 1; pll_n < 64; pll_n++) {
 485                                 pixclock = (1000000 / gbe_pll->clock_rate) *
 486                                                 (pll_n << pll_p) / pll_m;
 487
 488                                 error = var->pixclock - pixclock;
 489
 490                                 if (error < 0)
 491                                         error = -error;
 492
 493                                 if (error < best_error &&
 494                                     pll_m / pll_n >
 495                                     gbe_pll->fvco_min / gbe_pll->clock_rate &&
 496                                     pll_m / pll_n <
 497                                     gbe_pll->fvco_max / gbe_pll->clock_rate) {
 498                                         best_error = error;
 499                                         best_m = pll_m;
 500                                         best_n = pll_n;
 501                                         best_p = pll_p;
 502                                 }
 503                         }
 504
 505         if (!best_n || !best_m)
 506                 return -EINVAL; /* Resolution to high */
 507
 508         pixclock = (1000000 / gbe_pll->clock_rate) *
 509                 (best_n << best_p) / best_m;
 510
 511         /* set video timing information */
 512         if (timing) {
 513                 timing->width = var->xres;
 514                 timing->height = var->yres;
 515                 timing->pll_m = best_m;
 516                 timing->pll_n = best_n;
 517                 timing->pll_p = best_p;
 518                 timing->cfreq = gbe_pll->clock_rate * 1000 * timing->pll_m /
 519                         (timing->pll_n << timing->pll_p);
 520                 timing->htotal = var->left_margin + var->xres +
 521                                 var->right_margin + var->hsync_len;
 522                 timing->vtotal = var->upper_margin + var->yres +
 523                                 var->lower_margin + var->vsync_len;
 524                 timing->fields_sec = 1000 * timing->cfreq / timing->htotal *
 525                                 1000 / timing->vtotal;
 526                 timing->hblank_start = var->xres;
 527                 timing->vblank_start = var->yres;
 528                 timing->hblank_end = timing->htotal;
 529                 timing->hsync_start = var->xres + var->right_margin + 1;
 530                 timing->hsync_end = timing->hsync_start + var->hsync_len;
 531                 timing->vblank_end = timing->vtotal;
 532                 timing->vsync_start = var->yres + var->lower_margin + 1;
 533                 timing->vsync_end = timing->vsync_start + var->vsync_len;
 534         }
 535
 536         return pixclock;
 537 }
 538
 539 static void gbe_set_timing_info(struct gbe_timing_info *timing)
 540 {
 541         int temp;
 542         unsigned int val;
 543
 544         /* setup dot clock PLL */
 545         val = 0;
 546         SET_GBE_FIELD(DOTCLK, M, val, timing->pll_m - 1);
 547         SET_GBE_FIELD(DOTCLK, N, val, timing->pll_n - 1);
 548         SET_GBE_FIELD(DOTCLK, P, val, timing->pll_p);
 549         SET_GBE_FIELD(DOTCLK, RUN, val, 0);     /* do not start yet */
 550         gbe->dotclock = val;
 551         udelay(10000);
 552
 553         /* setup pixel counter */
 554         val = 0;
 555         SET_GBE_FIELD(VT_XYMAX, MAXX, val, timing->htotal);
 556         SET_GBE_FIELD(VT_XYMAX, MAXY, val, timing->vtotal);
 557         gbe->vt_xymax = val;
 558
 559         /* setup video timing signals */
 560         val = 0;
 561         SET_GBE_FIELD(VT_VSYNC, VSYNC_ON, val, timing->vsync_start);
 562         SET_GBE_FIELD(VT_VSYNC, VSYNC_OFF, val, timing->vsync_end);
 563         gbe->vt_vsync = val;
 564         val = 0;
 565         SET_GBE_FIELD(VT_HSYNC, HSYNC_ON, val, timing->hsync_start);
 566         SET_GBE_FIELD(VT_HSYNC, HSYNC_OFF, val, timing->hsync_end);
 567         gbe->vt_hsync = val;
 568         val = 0;
 569         SET_GBE_FIELD(VT_VBLANK, VBLANK_ON, val, timing->vblank_start);
 570         SET_GBE_FIELD(VT_VBLANK, VBLANK_OFF, val, timing->vblank_end);
 571         gbe->vt_vblank = val;
 572         val = 0;
 573         SET_GBE_FIELD(VT_HBLANK, HBLANK_ON, val,
 574                       timing->hblank_start - 5);
 575         SET_GBE_FIELD(VT_HBLANK, HBLANK_OFF, val,
 576                       timing->hblank_end - 3);
 577         gbe->vt_hblank = val;
 578
 579         /* setup internal timing signals */
 580         val = 0;
 581         SET_GBE_FIELD(VT_VCMAP, VCMAP_ON, val, timing->vblank_start);
 582         SET_GBE_FIELD(VT_VCMAP, VCMAP_OFF, val, timing->vblank_end);
 583         gbe->vt_vcmap = val;
 584         val = 0;
 585         SET_GBE_FIELD(VT_HCMAP, HCMAP_ON, val, timing->hblank_start);
 586         SET_GBE_FIELD(VT_HCMAP, HCMAP_OFF, val, timing->hblank_end);
 587         gbe->vt_hcmap = val;
 588
 589         val = 0;
 590         temp = timing->vblank_start - timing->vblank_end - 1;
 591         if (temp > 0)
 592                 temp = -temp;
 593
 594         if (flat_panel_enabled)
 595                 gbefb_setup_flatpanel(timing);
 596
 597         SET_GBE_FIELD(DID_START_XY, DID_STARTY, val, (u32) temp);
 598         if (timing->hblank_end >= 20)
 599                 SET_GBE_FIELD(DID_START_XY, DID_STARTX, val,
 600                               timing->hblank_end - 20);
 601         else
 602                 SET_GBE_FIELD(DID_START_XY, DID_STARTX, val,
 603                               timing->htotal - (20 - timing->hblank_end));
 604         gbe->did_start_xy = val;
 605
 606         val = 0;
 607         SET_GBE_FIELD(CRS_START_XY, CRS_STARTY, val, (u32) (temp + 1));
 608         if (timing->hblank_end >= GBE_CRS_MAGIC)
 609                 SET_GBE_FIELD(CRS_START_XY, CRS_STARTX, val,
 610                               timing->hblank_end - GBE_CRS_MAGIC);
 611         else
 612                 SET_GBE_FIELD(CRS_START_XY, CRS_STARTX, val,
 613                               timing->htotal - (GBE_CRS_MAGIC -
 614                                                 timing->hblank_end));
 615         gbe->crs_start_xy = val;
 616
 617         val = 0;
 618         SET_GBE_FIELD(VC_START_XY, VC_STARTY, val, (u32) temp);
 619         SET_GBE_FIELD(VC_START_XY, VC_STARTX, val, timing->hblank_end - 4);
 620         gbe->vc_start_xy = val;
 621
 622         val = 0;
 623         temp = timing->hblank_end - GBE_PIXEN_MAGIC_ON;
 624         if (temp < 0)
 625                 temp += timing->htotal; /* allow blank to wrap around */
 626
 627         SET_GBE_FIELD(VT_HPIXEN, HPIXEN_ON, val, temp);
 628         SET_GBE_FIELD(VT_HPIXEN, HPIXEN_OFF, val,
 629                       ((temp + timing->width -
 630                         GBE_PIXEN_MAGIC_OFF) % timing->htotal));
 631         gbe->vt_hpixen = val;
 632
 633         val = 0;
 634         SET_GBE_FIELD(VT_VPIXEN, VPIXEN_ON, val, timing->vblank_end);
 635         SET_GBE_FIELD(VT_VPIXEN, VPIXEN_OFF, val, timing->vblank_start);
 636         gbe->vt_vpixen = val;
 637
 638         /* turn off sync on green */
 639         val = 0;
 640         SET_GBE_FIELD(VT_FLAGS, SYNC_LOW, val, 1);
 641         gbe->vt_flags = val;
 642 }
 643
 644 /*
 645  *  Set the hardware according to 'par'.
 646  */
 647
 648 static int gbefb_set_par(struct fb_info *info)
 649 {
 650         int i;
 651         unsigned int val;
 652         int wholeTilesX, partTilesX, maxPixelsPerTileX;
 653         int height_pix;
 654         int xpmax, ypmax;       /* Monitor resolution */
 655         int bytesPerPixel;      /* Bytes per pixel */
 656         struct gbefb_par *par = (struct gbefb_par *) info->par;
 657
 658         compute_gbe_timing(&info->var, &par->timing);
 659
 660         bytesPerPixel = info->var.bits_per_pixel / 8;
 661         info->fix.line_length = info->var.xres_virtual * bytesPerPixel;
 662         xpmax = par->timing.width;
 663         ypmax = par->timing.height;
 664
 665         /* turn off GBE */
 666         gbe_turn_off();
 667
 668         /* set timing info */
 669         gbe_set_timing_info(&par->timing);
 670
 671         /* initialize DIDs */
 672         val = 0;
 673         switch (bytesPerPixel) {
 674         case 1:
 675                 SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_I8);
 676                 info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
 677                 break;
 678         case 2:
 679                 SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_ARGB5);
 680                 info->fix.visual = FB_VISUAL_TRUECOLOR;
 681                 break;
 682         case 4:
 683                 SET_GBE_FIELD(WID, TYP, val, GBE_CMODE_RGB8);
 684                 info->fix.visual = FB_VISUAL_TRUECOLOR;
 685                 break;
 686         }
 687         SET_GBE_FIELD(WID, BUF, val, GBE_BMODE_BOTH);
 688
 689         for (i = 0; i < 32; i++)
 690                 gbe->mode_regs[i] = val;
 691
 692         /* Initialize interrupts */
 693         gbe->vt_intr01 = 0xffffffff;
 694         gbe->vt_intr23 = 0xffffffff;
 695
 696         /* HACK:
 697            The GBE hardware uses a tiled memory to screen mapping. Tiles are
 698            blocks of 512x128, 256x128 or 128x128 pixels, respectively for 8bit,
 699            16bit and 32 bit modes (64 kB). They cover the screen with partial
 700            tiles on the right and/or bottom of the screen if needed.
 701            For example in 640x480 8 bit mode the mapping is:
 702
 703            <-------- 640 ----->
 704            <---- 512 ----><128|384 offscreen>
 705            ^  ^
 706            | 128    [tile 0]        [tile 1]
 707            |  v
 708            ^
 709            4 128    [tile 2]        [tile 3]
 710            8  v
 711            0  ^
 712            128    [tile 4]        [tile 5]
 713            |  v
 714            |  ^
 715            v  96    [tile 6]        [tile 7]
 716            32 offscreen
 717
 718            Tiles have the advantage that they can be allocated individually in
 719            memory. However, this mapping is not linear at all, which is not
 720            really convenient. In order to support linear addressing, the GBE
 721            DMA hardware is fooled into thinking the screen is only one tile
 722            large and but has a greater height, so that the DMA transfer covers
 723            the same region.
 724            Tiles are still allocated as independent chunks of 64KB of
 725            continuous physical memory and remapped so that the kernel sees the
 726            framebuffer as a continuous virtual memory. The GBE tile table is
 727            set up so that each tile references one of these 64k blocks:
 728
 729            GBE -> tile list    framebuffer           TLB   <------------ CPU
 730                   [ tile 0 ] -> [ 64KB ]  <- [ 16x 4KB page entries ]     ^
 731                      ...           ...              ...       linear virtual FB
 732                   [ tile n ] -> [ 64KB ]  <- [ 16x 4KB page entries ]     v
 733
 734
 735            The GBE hardware is then told that the buffer is 512*tweaked_height,
 736            with tweaked_height = real_width*real_height/pixels_per_tile.
 737            Thus the GBE hardware will scan the first tile, filing the first 64k
 738            covered region of the screen, and then will proceed to the next
 739            tile, until the whole screen is covered.
 740
 741            Here is what would happen at 640x480 8bit:
 742
 743            normal tiling               linear
 744            ^   11111111111111112222    11111111111111111111  ^
 745            128 11111111111111112222    11111111111111111111 102 lines
 746                11111111111111112222    11111111111111111111  v
 747            V   11111111111111112222    11111111222222222222
 748                33333333333333334444    22222222222222222222
 749                33333333333333334444    22222222222222222222
 750                <      512     >        <  256 >               102*640+256 = 64k
 751
 752            NOTE: The only mode for which this is not working is 800x600 8bit,
 753            as 800*600/512 = 937.5 which is not integer and thus causes
 754            flickering.
 755            I guess this is not so important as one can use 640x480 8bit or
 756            800x600 16bit anyway.
 757          */
 758
 759         /* Tell gbe about the tiles table location */
 760         /* tile_ptr -> [ tile 1 ] -> FB mem */
 761         /*             [ tile 2 ] -> FB mem */
 762         /*               ...                */
 763         val = 0;
 764         SET_GBE_FIELD(FRM_CONTROL, FRM_TILE_PTR, val, gbe_tiles.dma >> 9);
 765         SET_GBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, val, 0); /* do not start */
 766         SET_GBE_FIELD(FRM_CONTROL, FRM_LINEAR, val, 0);
 767         gbe->frm_control = val;
 768
 769         maxPixelsPerTileX = 512 / bytesPerPixel;
 770         wholeTilesX = 1;
 771         partTilesX = 0;
 772
 773         /* Initialize the framebuffer */
 774         val = 0;
 775         SET_GBE_FIELD(FRM_SIZE_TILE, FRM_WIDTH_TILE, val, wholeTilesX);
 776         SET_GBE_FIELD(FRM_SIZE_TILE, FRM_RHS, val, partTilesX);
 777
 778         switch (bytesPerPixel) {
 779         case 1:
 780                 SET_GBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, val,
 781                               GBE_FRM_DEPTH_8);
 782                 break;
 783         case 2:
 784                 SET_GBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, val,
 785                               GBE_FRM_DEPTH_16);
 786                 break;
 787         case 4:
 788                 SET_GBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, val,
 789                               GBE_FRM_DEPTH_32);
 790                 break;
 791         }
 792         gbe->frm_size_tile = val;
 793
 794         /* compute tweaked height */
 795         height_pix = xpmax * ypmax / maxPixelsPerTileX;
 796
 797         val = 0;
 798         SET_GBE_FIELD(FRM_SIZE_PIXEL, FB_HEIGHT_PIX, val, height_pix);
 799         gbe->frm_size_pixel = val;
 800
 801         /* turn off DID and overlay DMA */
 802         gbe->did_control = 0;
 803         gbe->ovr_width_tile = 0;
 804
 805         /* Turn off mouse cursor */
 806         gbe->crs_ctl = 0;
 807
 808         /* Turn on GBE */
 809         gbe_turn_on();
 810
 811         /* Initialize the gamma map */
 812         udelay(10);
 813         for (i = 0; i < 256; i++)
 814                 gbe->gmap[i] = (i << 24) | (i << 16) | (i << 8);
 815
 816         /* Initialize the color map */
 817         for (i = 0; i < 256; i++)
 818                 gbe_cmap[i] = (i << 8) | (i << 16) | (i << 24);
 819
 820         gbe_loadcmap();
 821
 822         return 0;
 823 }
 824
 825 static void gbefb_encode_fix(struct fb_fix_screeninfo *fix,
 826                              struct fb_var_screeninfo *var)
 827 {
 828         memset(fix, 0, sizeof(struct fb_fix_screeninfo));
 829         strcpy(fix->id, "SGI GBE");
 830         fix->smem_start = (unsigned long) gbe_mem;
 831         fix->smem_len = gbe_mem_size;
 832         fix->type = FB_TYPE_PACKED_PIXELS;
 833         fix->type_aux = 0;
 834         fix->accel = FB_ACCEL_NONE;
 835         switch (var->bits_per_pixel) {
 836         case 8:
 837                 fix->visual = FB_VISUAL_PSEUDOCOLOR;
 838                 break;
 839         default:
 840                 fix->visual = FB_VISUAL_TRUECOLOR;
 841                 break;
 842         }
 843         fix->ywrapstep = 0;
 844         fix->xpanstep = 0;
 845         fix->ypanstep = 0;
 846         fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
 847         fix->mmio_start = GBE_BASE;
 848         fix->mmio_len = sizeof(struct sgi_gbe);
 849 }
 850
 851 /*
 852  *  Set a single color register. The values supplied are already
 853  *  rounded down to the hardware's capabilities (according to the
 854  *  entries in the var structure). Return != 0 for invalid regno.
 855  */
 856
 857 static int gbefb_setcolreg(unsigned regno, unsigned red, unsigned green,
 858                              unsigned blue, unsigned transp,
 859                              struct fb_info *info)
 860 {
 861         int i;
 862
 863         if (regno > 255)
 864                 return 1;
 865         red >>= 8;
 866         green >>= 8;
 867         blue >>= 8;
 868
 869         if (info->var.bits_per_pixel <= 8) {
 870                 gbe_cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
 871                 if (gbe_turned_on) {
 872                         /* wait for the color map FIFO to have a free entry */
 873                         for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++)
 874                                 udelay(10);
 875                         if (i == 1000) {
 876                                 printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
 877                                 return 1;
 878                         }
 879                         gbe->cmap[regno] = gbe_cmap[regno];
 880                 }
 881         } else if (regno < 16) {
 882                 switch (info->var.bits_per_pixel) {
 883                 case 15:
 884                 case 16:
 885                         red >>= 3;
 886                         green >>= 3;
 887                         blue >>= 3;
 888                         pseudo_palette[regno] =
 889                                 (red << info->var.red.offset) |
 890                                 (green << info->var.green.offset) |
 891                                 (blue << info->var.blue.offset);
 892                         break;
 893                 case 32:
 894                         pseudo_palette[regno] =
 895                                 (red << info->var.red.offset) |
 896                                 (green << info->var.green.offset) |
 897                                 (blue << info->var.blue.offset);
 898                         break;
 899                 }
 900         }
 901
 902         return 0;
 903 }
 904
 905 /*
 906  *  Check video mode validity, eventually modify var to best match.
 907  */
 908 static int gbefb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 909 {
 910         unsigned int line_length;
 911         struct gbe_timing_info timing;
 912         int ret;
 913
 914         /* Limit bpp to 8, 16, and 32 */
 915         if (var->bits_per_pixel <= 8)
 916                 var->bits_per_pixel = 8;
 917         else if (var->bits_per_pixel <= 16)
 918                 var->bits_per_pixel = 16;
 919         else if (var->bits_per_pixel <= 32)
 920                 var->bits_per_pixel = 32;
 921         else
 922                 return -EINVAL;
 923
 924         /* Check the mode can be mapped linearly with the tile table trick. */
 925         /* This requires width x height x bytes/pixel be a multiple of 512 */
 926         if ((var->xres * var->yres * var->bits_per_pixel) & 4095)
 927                 return -EINVAL;
 928
 929         var->grayscale = 0;     /* No grayscale for now */
 930
 931         ret = compute_gbe_timing(var, &timing);
 932         var->pixclock = ret;
 933         if (ret < 0)
 934                 return -EINVAL;
 935
 936         /* Adjust virtual resolution, if necessary */
 937         if (var->xres > var->xres_virtual || (!ywrap && !ypan))
 938                 var->xres_virtual = var->xres;
 939         if (var->yres > var->yres_virtual || (!ywrap && !ypan))
 940                 var->yres_virtual = var->yres;
 941
 942         if (var->vmode & FB_VMODE_CONUPDATE) {
 943                 var->vmode |= FB_VMODE_YWRAP;
 944                 var->xoffset = info->var.xoffset;
 945                 var->yoffset = info->var.yoffset;
 946         }
 947
 948         /* No grayscale for now */
 949         var->grayscale = 0;
 950
 951         /* Memory limit */
 952         line_length = var->xres_virtual * var->bits_per_pixel / 8;
 953         if (line_length * var->yres_virtual > gbe_mem_size)
 954                 return -ENOMEM; /* Virtual resolution too high */
 955
 956         switch (var->bits_per_pixel) {
 957         case 8:
 958                 var->red.offset = 0;
 959                 var->red.length = 8;
 960                 var->green.offset = 0;
 961                 var->green.length = 8;
 962                 var->blue.offset = 0;
 963                 var->blue.length = 8;
 964                 var->transp.offset = 0;
 965                 var->transp.length = 0;
 966                 break;
 967         case 16:                /* RGB 1555 */
 968                 var->red.offset = 10;
 969                 var->red.length = 5;
 970                 var->green.offset = 5;
 971                 var->green.length = 5;
 972                 var->blue.offset = 0;
 973                 var->blue.length = 5;
 974                 var->transp.offset = 0;
 975                 var->transp.length = 0;
 976                 break;
 977         case 32:                /* RGB 8888 */
 978                 var->red.offset = 24;
 979                 var->red.length = 8;
 980                 var->green.offset = 16;
 981                 var->green.length = 8;
 982                 var->blue.offset = 8;
 983                 var->blue.length = 8;
 984                 var->transp.offset = 0;
 985                 var->transp.length = 8;
 986                 break;
 987         }
 988         var->red.msb_right = 0;
 989         var->green.msb_right = 0;
 990         var->blue.msb_right = 0;
 991         var->transp.msb_right = 0;
 992
 993         var->left_margin = timing.htotal - timing.hsync_end;
 994         var->right_margin = timing.hsync_start - timing.width;
 995         var->upper_margin = timing.vtotal - timing.vsync_end;
 996         var->lower_margin = timing.vsync_start - timing.height;
 997         var->hsync_len = timing.hsync_end - timing.hsync_start;
 998         var->vsync_len = timing.vsync_end - timing.vsync_start;
 999
1000         return 0;
1001 }
1002
1003 static int gbefb_mmap(struct fb_info *info,
1004                         struct vm_area_struct *vma)
1005 {
1006         unsigned long size = vma->vm_end - vma->vm_start;
1007         unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
1008         unsigned long addr;
1009         unsigned long phys_addr, phys_size;
1010         u16 *tile;
1011
1012         /* check range */
1013         if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
1014                 return -EINVAL;
1015         if (size > gbe_mem_size)
1016                 return -EINVAL;
1017         if (offset > gbe_mem_size - size)
1018                 return -EINVAL;
1019
1020         /* remap using the fastest write-through mode on architecture */
1021         /* try not polluting the cache when possible */
1022         pgprot_val(vma->vm_page_prot) =
1023                 pgprot_fb(pgprot_val(vma->vm_page_prot));
1024
1025         /* VM_IO | VM_DONTEXPAND | VM_DONTDUMP are set by remap_pfn_range() */
1026
1027         /* look for the starting tile */
1028         tile = &gbe_tiles.cpu[offset >> TILE_SHIFT];
1029         addr = vma->vm_start;
1030         offset &= TILE_MASK;
1031
1032         /* remap each tile separately */
1033         do {
1034                 phys_addr = (((unsigned long) (*tile)) << TILE_SHIFT) + offset;
1035                 if ((offset + size) < TILE_SIZE)
1036                         phys_size = size;
1037                 else
1038                         phys_size = TILE_SIZE - offset;
1039
1040                 if (remap_pfn_range(vma, addr, phys_addr >> PAGE_SHIFT,
1041                                                 phys_size, vma->vm_page_prot))
1042                         return -EAGAIN;
1043
1044                 offset = 0;
1045                 size -= phys_size;
1046                 addr += phys_size;
1047                 tile++;
1048         } while (size);
1049
1050         return 0;
1051 }
1052
1053 static struct fb_ops gbefb_ops = {
1054         .owner          = THIS_MODULE,
1055         .fb_check_var   = gbefb_check_var,
1056         .fb_set_par     = gbefb_set_par,
1057         .fb_setcolreg   = gbefb_setcolreg,
1058         .fb_mmap        = gbefb_mmap,
1059         .fb_blank       = gbefb_blank,
1060         .fb_fillrect    = cfb_fillrect,
1061         .fb_copyarea    = cfb_copyarea,
1062         .fb_imageblit   = cfb_imageblit,
1063 };
1064
1065 /*
1066  * sysfs
1067  */
1068
1069 static ssize_t gbefb_show_memsize(struct device *dev, struct device_attribute *attr, char *buf)
1070 {
1071         return snprintf(buf, PAGE_SIZE, "%d\n", gbe_mem_size);
1072 }
1073
1074 static DEVICE_ATTR(size, S_IRUGO, gbefb_show_memsize, NULL);
1075
1076 static ssize_t gbefb_show_rev(struct device *device, struct device_attribute *attr, char *buf)
1077 {
1078         return snprintf(buf, PAGE_SIZE, "%d\n", gbe_revision);
1079 }
1080
1081 static DEVICE_ATTR(revision, S_IRUGO, gbefb_show_rev, NULL);
1082
1083 static void gbefb_remove_sysfs(struct device *dev)
1084 {
1085         device_remove_file(dev, &dev_attr_size);
1086         device_remove_file(dev, &dev_attr_revision);
1087 }
1088
1089 static void gbefb_create_sysfs(struct device *dev)
1090 {
1091         device_create_file(dev, &dev_attr_size);
1092         device_create_file(dev, &dev_attr_revision);
1093 }
1094
1095 /*
1096  * Initialization
1097  */
1098
1099 static int gbefb_setup(char *options)
1100 {
1101         char *this_opt;
1102
1103         if (!options || !*options)
1104                 return 0;
1105
1106         while ((this_opt = strsep(&options, ",")) != NULL) {
1107                 if (!strncmp(this_opt, "monitor:", 8)) {
1108                         if (!strncmp(this_opt + 8, "crt", 3)) {
1109                                 flat_panel_enabled = 0;
1110                                 default_var = &default_var_CRT;
1111                                 default_mode = &default_mode_CRT;
1112                         } else if (!strncmp(this_opt + 8, "1600sw", 6) ||
1113                                    !strncmp(this_opt + 8, "lcd", 3)) {
1114                                 flat_panel_enabled = 1;
1115                                 default_var = &default_var_LCD;
1116                                 default_mode = &default_mode_LCD;
1117                         }
1118                 } else if (!strncmp(this_opt, "mem:", 4)) {
1119                         gbe_mem_size = memparse(this_opt + 4, &this_opt);
1120                         if (gbe_mem_size > CONFIG_FB_GBE_MEM * 1024 * 1024)
1121                                 gbe_mem_size = CONFIG_FB_GBE_MEM * 1024 * 1024;
1122                         if (gbe_mem_size < TILE_SIZE)
1123                                 gbe_mem_size = TILE_SIZE;
1124                 } else
1125                         mode_option = this_opt;
1126         }
1127         return 0;
1128 }
1129
1130 static int gbefb_probe(struct platform_device *p_dev)
1131 {
1132         int i, ret = 0;
1133         struct fb_info *info;
1134         struct gbefb_par *par;
1135 #ifndef MODULE
1136         char *options = NULL;
1137 #endif
1138
1139         info = framebuffer_alloc(sizeof(struct gbefb_par), &p_dev->dev);
1140         if (!info)
1141                 return -ENOMEM;
1142
1143 #ifndef MODULE
1144         if (fb_get_options("gbefb", &options)) {
1145                 ret = -ENODEV;
1146                 goto out_release_framebuffer;
1147         }
1148         gbefb_setup(options);
1149 #endif
1150
1151         if (!request_mem_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) {
1152                 printk(KERN_ERR "gbefb: couldn't reserve mmio region\n");
1153                 ret = -EBUSY;
1154                 goto out_release_framebuffer;
1155         }
1156
1157         gbe = (struct sgi_gbe *) devm_ioremap(&p_dev->dev, GBE_BASE,
1158                                               sizeof(struct sgi_gbe));
1159         if (!gbe) {
1160                 printk(KERN_ERR "gbefb: couldn't map mmio region\n");
1161                 ret = -ENXIO;
1162                 goto out_release_mem_region;
1163         }
1164         gbe_revision = gbe->ctrlstat & 15;
1165
1166         gbe_tiles.cpu =
1167                 dma_alloc_coherent(NULL, GBE_TLB_SIZE * sizeof(uint16_t),
1168                                    &gbe_tiles.dma, GFP_KERNEL);
1169         if (!gbe_tiles.cpu) {
1170                 printk(KERN_ERR "gbefb: couldn't allocate tiles table\n");
1171                 ret = -ENOMEM;
1172                 goto out_release_mem_region;
1173         }
1174
1175         if (gbe_mem_phys) {
1176                 /* memory was allocated at boot time */
1177                 gbe_mem = devm_ioremap_nocache(&p_dev->dev, gbe_mem_phys,
1178                                                gbe_mem_size);
1179                 if (!gbe_mem) {
1180                         printk(KERN_ERR "gbefb: couldn't map framebuffer\n");
1181                         ret = -ENOMEM;
1182                         goto out_tiles_free;
1183                 }
1184
1185                 gbe_dma_addr = 0;
1186         } else {
1187                 /* try to allocate memory with the classical allocator
1188                  * this has high chance to fail on low memory machines */
1189                 gbe_mem = dma_alloc_coherent(NULL, gbe_mem_size, &gbe_dma_addr,
1190                                              GFP_KERNEL);
1191                 if (!gbe_mem) {
1192                         printk(KERN_ERR "gbefb: couldn't allocate framebuffer memory\n");
1193                         ret = -ENOMEM;
1194                         goto out_tiles_free;
1195                 }
1196
1197                 gbe_mem_phys = (unsigned long) gbe_dma_addr;
1198         }
1199
1200 #ifdef CONFIG_X86
1201         mtrr_add(gbe_mem_phys, gbe_mem_size, MTRR_TYPE_WRCOMB, 1);
1202 #endif
1203
1204         /* map framebuffer memory into tiles table */
1205         for (i = 0; i < (gbe_mem_size >> TILE_SHIFT); i++)
1206                 gbe_tiles.cpu[i] = (gbe_mem_phys >> TILE_SHIFT) + i;
1207
1208         info->fbops = &gbefb_ops;
1209         info->pseudo_palette = pseudo_palette;
1210         info->flags = FBINFO_DEFAULT;
1211         info->screen_base = gbe_mem;
1212         fb_alloc_cmap(&info->cmap, 256, 0);
1213
1214         /* reset GBE */
1215         gbe_reset();
1216
1217         par = info->par;
1218         /* turn on default video mode */
1219         if (fb_find_mode(&par->var, info, mode_option, NULL, 0,
1220                          default_mode, 8) == 0)
1221                 par->var = *default_var;
1222         info->var = par->var;
1223         gbefb_check_var(&par->var, info);
1224         gbefb_encode_fix(&info->fix, &info->var);
1225
1226         if (register_framebuffer(info) < 0) {
1227                 printk(KERN_ERR "gbefb: couldn't register framebuffer\n");
1228                 ret = -ENXIO;
1229                 goto out_gbe_unmap;
1230         }
1231
1232         platform_set_drvdata(p_dev, info);
1233         gbefb_create_sysfs(&p_dev->dev);
1234
1235         fb_info(info, "%s rev %d @ 0x%08x using %dkB memory\n",
1236                 info->fix.id, gbe_revision, (unsigned)GBE_BASE,
1237                 gbe_mem_size >> 10);
1238
1239         return 0;
1240
1241 out_gbe_unmap:
1242         if (gbe_dma_addr)
1243                 dma_free_coherent(NULL, gbe_mem_size, gbe_mem, gbe_mem_phys);
1244 out_tiles_free:
1245         dma_free_coherent(NULL, GBE_TLB_SIZE * sizeof(uint16_t),
1246                           (void *)gbe_tiles.cpu, gbe_tiles.dma);
1247 out_release_mem_region:
1248         release_mem_region(GBE_BASE, sizeof(struct sgi_gbe));
1249 out_release_framebuffer:
1250         framebuffer_release(info);
1251
1252         return ret;
1253 }
1254
1255 static int gbefb_remove(struct platform_device* p_dev)
1256 {
1257         struct fb_info *info = platform_get_drvdata(p_dev);
1258
1259         unregister_framebuffer(info);
1260         gbe_turn_off();
1261         if (gbe_dma_addr)
1262                 dma_free_coherent(NULL, gbe_mem_size, gbe_mem, gbe_mem_phys);
1263         dma_free_coherent(NULL, GBE_TLB_SIZE * sizeof(uint16_t),
1264                           (void *)gbe_tiles.cpu, gbe_tiles.dma);
1265         release_mem_region(GBE_BASE, sizeof(struct sgi_gbe));
1266         gbefb_remove_sysfs(&p_dev->dev);
1267         framebuffer_release(info);
1268
1269         return 0;
1270 }
1271
1272 static struct platform_driver gbefb_driver = {
1273         .probe = gbefb_probe,
1274         .remove = gbefb_remove,
1275         .driver = {
1276                 .name = "gbefb",
1277         },
1278 };
1279
1280 static struct platform_device *gbefb_device;
1281
1282 static int __init gbefb_init(void)
1283 {
1284         int ret = platform_driver_register(&gbefb_driver);
1285         if (!ret) {
1286                 gbefb_device = platform_device_alloc("gbefb", 0);
1287                 if (gbefb_device) {
1288                         ret = platform_device_add(gbefb_device);
1289                 } else {
1290                         ret = -ENOMEM;
1291                 }
1292                 if (ret) {
1293                         platform_device_put(gbefb_device);
1294                         platform_driver_unregister(&gbefb_driver);
1295                 }
1296         }
1297         return ret;
1298 }
1299
1300 static void __exit gbefb_exit(void)
1301 {
1302         platform_device_unregister(gbefb_device);
1303         platform_driver_unregister(&gbefb_driver);
1304 }
1305
1306 module_init(gbefb_init);
1307 module_exit(gbefb_exit);
1308
1309 MODULE_LICENSE("GPL");