ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
[pandora-kernel.git] / drivers / usb / serial / usb_wwan.c
1 /*
2   USB Driver layer for GSM modems
3
4   Copyright (C) 2005  Matthias Urlichs <smurf@smurf.noris.de>
5
6   This driver is free software; you can redistribute it and/or modify
7   it under the terms of Version 2 of the GNU General Public License as
8   published by the Free Software Foundation.
9
10   Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
11
12   History: see the git log.
13
14   Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
15
16   This driver exists because the "normal" serial driver doesn't work too well
17   with GSM modems. Issues:
18   - data loss -- one single Receive URB is not nearly enough
19   - controlling the baud rate doesn't make sense
20 */
21
22 #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
23 #define DRIVER_DESC "USB Driver for GSM modems"
24
25 #include <linux/kernel.h>
26 #include <linux/jiffies.h>
27 #include <linux/errno.h>
28 #include <linux/slab.h>
29 #include <linux/tty.h>
30 #include <linux/tty_flip.h>
31 #include <linux/module.h>
32 #include <linux/bitops.h>
33 #include <linux/uaccess.h>
34 #include <linux/usb.h>
35 #include <linux/usb/serial.h>
36 #include <linux/serial.h>
37 #include "usb-wwan.h"
38
39 void usb_wwan_dtr_rts(struct usb_serial_port *port, int on)
40 {
41         struct usb_wwan_port_private *portdata;
42         struct usb_wwan_intf_private *intfdata;
43
44         intfdata = port->serial->private;
45
46         if (!intfdata->send_setup)
47                 return;
48
49         portdata = usb_get_serial_port_data(port);
50         /* FIXME: locking */
51         portdata->rts_state = on;
52         portdata->dtr_state = on;
53
54         intfdata->send_setup(port);
55 }
56 EXPORT_SYMBOL(usb_wwan_dtr_rts);
57
58 void usb_wwan_set_termios(struct tty_struct *tty,
59                           struct usb_serial_port *port,
60                           struct ktermios *old_termios)
61 {
62         struct usb_wwan_intf_private *intfdata = port->serial->private;
63
64         /* Doesn't support option setting */
65         tty_termios_copy_hw(&tty->termios, old_termios);
66
67         if (intfdata->send_setup)
68                 intfdata->send_setup(port);
69 }
70 EXPORT_SYMBOL(usb_wwan_set_termios);
71
72 int usb_wwan_tiocmget(struct tty_struct *tty)
73 {
74         struct usb_serial_port *port = tty->driver_data;
75         unsigned int value;
76         struct usb_wwan_port_private *portdata;
77
78         portdata = usb_get_serial_port_data(port);
79
80         value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
81             ((portdata->dtr_state) ? TIOCM_DTR : 0) |
82             ((portdata->cts_state) ? TIOCM_CTS : 0) |
83             ((portdata->dsr_state) ? TIOCM_DSR : 0) |
84             ((portdata->dcd_state) ? TIOCM_CAR : 0) |
85             ((portdata->ri_state) ? TIOCM_RNG : 0);
86
87         return value;
88 }
89 EXPORT_SYMBOL(usb_wwan_tiocmget);
90
91 int usb_wwan_tiocmset(struct tty_struct *tty,
92                       unsigned int set, unsigned int clear)
93 {
94         struct usb_serial_port *port = tty->driver_data;
95         struct usb_wwan_port_private *portdata;
96         struct usb_wwan_intf_private *intfdata;
97
98         portdata = usb_get_serial_port_data(port);
99         intfdata = port->serial->private;
100
101         if (!intfdata->send_setup)
102                 return -EINVAL;
103
104         /* FIXME: what locks portdata fields ? */
105         if (set & TIOCM_RTS)
106                 portdata->rts_state = 1;
107         if (set & TIOCM_DTR)
108                 portdata->dtr_state = 1;
109
110         if (clear & TIOCM_RTS)
111                 portdata->rts_state = 0;
112         if (clear & TIOCM_DTR)
113                 portdata->dtr_state = 0;
114         return intfdata->send_setup(port);
115 }
116 EXPORT_SYMBOL(usb_wwan_tiocmset);
117
118 static int get_serial_info(struct usb_serial_port *port,
119                            struct serial_struct __user *retinfo)
120 {
121         struct serial_struct tmp;
122
123         if (!retinfo)
124                 return -EFAULT;
125
126         memset(&tmp, 0, sizeof(tmp));
127         tmp.line            = port->minor;
128         tmp.port            = port->port_number;
129         tmp.baud_base       = tty_get_baud_rate(port->port.tty);
130         tmp.close_delay     = port->port.close_delay / 10;
131         tmp.closing_wait    = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
132                                  ASYNC_CLOSING_WAIT_NONE :
133                                  port->port.closing_wait / 10;
134
135         if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
136                 return -EFAULT;
137         return 0;
138 }
139
140 static int set_serial_info(struct usb_serial_port *port,
141                            struct serial_struct __user *newinfo)
142 {
143         struct serial_struct new_serial;
144         unsigned int closing_wait, close_delay;
145         int retval = 0;
146
147         if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
148                 return -EFAULT;
149
150         close_delay = new_serial.close_delay * 10;
151         closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
152                         ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
153
154         mutex_lock(&port->port.mutex);
155
156         if (!capable(CAP_SYS_ADMIN)) {
157                 if ((close_delay != port->port.close_delay) ||
158                     (closing_wait != port->port.closing_wait))
159                         retval = -EPERM;
160                 else
161                         retval = -EOPNOTSUPP;
162         } else {
163                 port->port.close_delay  = close_delay;
164                 port->port.closing_wait = closing_wait;
165         }
166
167         mutex_unlock(&port->port.mutex);
168         return retval;
169 }
170
171 int usb_wwan_ioctl(struct tty_struct *tty,
172                    unsigned int cmd, unsigned long arg)
173 {
174         struct usb_serial_port *port = tty->driver_data;
175
176         dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd);
177
178         switch (cmd) {
179         case TIOCGSERIAL:
180                 return get_serial_info(port,
181                                        (struct serial_struct __user *) arg);
182         case TIOCSSERIAL:
183                 return set_serial_info(port,
184                                        (struct serial_struct __user *) arg);
185         default:
186                 break;
187         }
188
189         dev_dbg(&port->dev, "%s arg not supported\n", __func__);
190
191         return -ENOIOCTLCMD;
192 }
193 EXPORT_SYMBOL(usb_wwan_ioctl);
194
195 /* Write */
196 int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
197                    const unsigned char *buf, int count)
198 {
199         struct usb_wwan_port_private *portdata;
200         struct usb_wwan_intf_private *intfdata;
201         int i;
202         int left, todo;
203         struct urb *this_urb = NULL;    /* spurious */
204         int err;
205         unsigned long flags;
206
207         portdata = usb_get_serial_port_data(port);
208         intfdata = port->serial->private;
209
210         dev_dbg(&port->dev, "%s: write (%d chars)\n", __func__, count);
211
212         i = 0;
213         left = count;
214         for (i = 0; left > 0 && i < N_OUT_URB; i++) {
215                 todo = left;
216                 if (todo > OUT_BUFLEN)
217                         todo = OUT_BUFLEN;
218
219                 this_urb = portdata->out_urbs[i];
220                 if (test_and_set_bit(i, &portdata->out_busy)) {
221                         if (time_before(jiffies,
222                                         portdata->tx_start_time[i] + 10 * HZ))
223                                 continue;
224                         usb_unlink_urb(this_urb);
225                         continue;
226                 }
227                 dev_dbg(&port->dev, "%s: endpoint %d buf %d\n", __func__,
228                         usb_pipeendpoint(this_urb->pipe), i);
229
230                 err = usb_autopm_get_interface_async(port->serial->interface);
231                 if (err < 0)
232                         break;
233
234                 /* send the data */
235                 memcpy(this_urb->transfer_buffer, buf, todo);
236                 this_urb->transfer_buffer_length = todo;
237
238                 spin_lock_irqsave(&intfdata->susp_lock, flags);
239                 if (intfdata->suspended) {
240                         usb_anchor_urb(this_urb, &portdata->delayed);
241                         spin_unlock_irqrestore(&intfdata->susp_lock, flags);
242                 } else {
243                         intfdata->in_flight++;
244                         spin_unlock_irqrestore(&intfdata->susp_lock, flags);
245                         err = usb_submit_urb(this_urb, GFP_ATOMIC);
246                         if (err) {
247                                 dev_dbg(&port->dev,
248                                         "usb_submit_urb %p (write bulk) failed (%d)\n",
249                                         this_urb, err);
250                                 clear_bit(i, &portdata->out_busy);
251                                 spin_lock_irqsave(&intfdata->susp_lock, flags);
252                                 intfdata->in_flight--;
253                                 spin_unlock_irqrestore(&intfdata->susp_lock,
254                                                        flags);
255                                 usb_autopm_put_interface_async(port->serial->interface);
256                                 break;
257                         }
258                 }
259
260                 portdata->tx_start_time[i] = jiffies;
261                 buf += todo;
262                 left -= todo;
263         }
264
265         count -= left;
266         dev_dbg(&port->dev, "%s: wrote (did %d)\n", __func__, count);
267         return count;
268 }
269 EXPORT_SYMBOL(usb_wwan_write);
270
271 static void usb_wwan_indat_callback(struct urb *urb)
272 {
273         int err;
274         int endpoint;
275         struct usb_serial_port *port;
276         struct device *dev;
277         unsigned char *data = urb->transfer_buffer;
278         int status = urb->status;
279
280         endpoint = usb_pipeendpoint(urb->pipe);
281         port = urb->context;
282         dev = &port->dev;
283
284         if (status) {
285                 dev_dbg(dev, "%s: nonzero status: %d on endpoint %02x.\n",
286                         __func__, status, endpoint);
287         } else {
288                 if (urb->actual_length) {
289                         tty_insert_flip_string(&port->port, data,
290                                         urb->actual_length);
291                         tty_flip_buffer_push(&port->port);
292                 } else
293                         dev_dbg(dev, "%s: empty read urb received\n", __func__);
294         }
295         /* Resubmit urb so we continue receiving */
296         err = usb_submit_urb(urb, GFP_ATOMIC);
297         if (err) {
298                 if (err != -EPERM) {
299                         dev_err(dev, "%s: resubmit read urb failed. (%d)\n",
300                                 __func__, err);
301                         /* busy also in error unless we are killed */
302                         usb_mark_last_busy(port->serial->dev);
303                 }
304         } else {
305                 usb_mark_last_busy(port->serial->dev);
306         }
307 }
308
309 static void usb_wwan_outdat_callback(struct urb *urb)
310 {
311         struct usb_serial_port *port;
312         struct usb_wwan_port_private *portdata;
313         struct usb_wwan_intf_private *intfdata;
314         int i;
315
316         port = urb->context;
317         intfdata = port->serial->private;
318
319         usb_serial_port_softint(port);
320         usb_autopm_put_interface_async(port->serial->interface);
321         portdata = usb_get_serial_port_data(port);
322         spin_lock(&intfdata->susp_lock);
323         intfdata->in_flight--;
324         spin_unlock(&intfdata->susp_lock);
325
326         for (i = 0; i < N_OUT_URB; ++i) {
327                 if (portdata->out_urbs[i] == urb) {
328                         smp_mb__before_clear_bit();
329                         clear_bit(i, &portdata->out_busy);
330                         break;
331                 }
332         }
333 }
334
335 int usb_wwan_write_room(struct tty_struct *tty)
336 {
337         struct usb_serial_port *port = tty->driver_data;
338         struct usb_wwan_port_private *portdata;
339         int i;
340         int data_len = 0;
341         struct urb *this_urb;
342
343         portdata = usb_get_serial_port_data(port);
344
345         for (i = 0; i < N_OUT_URB; i++) {
346                 this_urb = portdata->out_urbs[i];
347                 if (this_urb && !test_bit(i, &portdata->out_busy))
348                         data_len += OUT_BUFLEN;
349         }
350
351         dev_dbg(&port->dev, "%s: %d\n", __func__, data_len);
352         return data_len;
353 }
354 EXPORT_SYMBOL(usb_wwan_write_room);
355
356 int usb_wwan_chars_in_buffer(struct tty_struct *tty)
357 {
358         struct usb_serial_port *port = tty->driver_data;
359         struct usb_wwan_port_private *portdata;
360         int i;
361         int data_len = 0;
362         struct urb *this_urb;
363
364         portdata = usb_get_serial_port_data(port);
365
366         for (i = 0; i < N_OUT_URB; i++) {
367                 this_urb = portdata->out_urbs[i];
368                 /* FIXME: This locking is insufficient as this_urb may
369                    go unused during the test */
370                 if (this_urb && test_bit(i, &portdata->out_busy))
371                         data_len += this_urb->transfer_buffer_length;
372         }
373         dev_dbg(&port->dev, "%s: %d\n", __func__, data_len);
374         return data_len;
375 }
376 EXPORT_SYMBOL(usb_wwan_chars_in_buffer);
377
378 int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port)
379 {
380         struct usb_wwan_port_private *portdata;
381         struct usb_wwan_intf_private *intfdata;
382         struct usb_serial *serial = port->serial;
383         int i, err;
384         struct urb *urb;
385
386         portdata = usb_get_serial_port_data(port);
387         intfdata = serial->private;
388
389         /* Start reading from the IN endpoint */
390         for (i = 0; i < N_IN_URB; i++) {
391                 urb = portdata->in_urbs[i];
392                 if (!urb)
393                         continue;
394                 err = usb_submit_urb(urb, GFP_KERNEL);
395                 if (err) {
396                         dev_dbg(&port->dev, "%s: submit urb %d failed (%d) %d\n",
397                                 __func__, i, err, urb->transfer_buffer_length);
398                 }
399         }
400
401         if (intfdata->send_setup)
402                 intfdata->send_setup(port);
403
404         serial->interface->needs_remote_wakeup = 1;
405         spin_lock_irq(&intfdata->susp_lock);
406         portdata->opened = 1;
407         spin_unlock_irq(&intfdata->susp_lock);
408         /* this balances a get in the generic USB serial code */
409         usb_autopm_put_interface(serial->interface);
410
411         return 0;
412 }
413 EXPORT_SYMBOL(usb_wwan_open);
414
415 void usb_wwan_close(struct usb_serial_port *port)
416 {
417         int i;
418         struct usb_serial *serial = port->serial;
419         struct usb_wwan_port_private *portdata;
420         struct usb_wwan_intf_private *intfdata = port->serial->private;
421
422         portdata = usb_get_serial_port_data(port);
423
424         /* Stop reading/writing urbs */
425         spin_lock_irq(&intfdata->susp_lock);
426         portdata->opened = 0;
427         spin_unlock_irq(&intfdata->susp_lock);
428
429         for (i = 0; i < N_IN_URB; i++)
430                 usb_kill_urb(portdata->in_urbs[i]);
431         for (i = 0; i < N_OUT_URB; i++)
432                 usb_kill_urb(portdata->out_urbs[i]);
433
434         /* balancing - important as an error cannot be handled*/
435         usb_autopm_get_interface_no_resume(serial->interface);
436         serial->interface->needs_remote_wakeup = 0;
437 }
438 EXPORT_SYMBOL(usb_wwan_close);
439
440 /* Helper functions used by usb_wwan_setup_urbs */
441 static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
442                                       int endpoint,
443                                       int dir, void *ctx, char *buf, int len,
444                                       void (*callback) (struct urb *))
445 {
446         struct usb_serial *serial = port->serial;
447         struct urb *urb;
448
449         urb = usb_alloc_urb(0, GFP_KERNEL);     /* No ISO */
450         if (!urb)
451                 return NULL;
452
453         /* Fill URB using supplied data. */
454         usb_fill_bulk_urb(urb, serial->dev,
455                           usb_sndbulkpipe(serial->dev, endpoint) | dir,
456                           buf, len, callback, ctx);
457
458         return urb;
459 }
460
461 int usb_wwan_port_probe(struct usb_serial_port *port)
462 {
463         struct usb_wwan_port_private *portdata;
464         struct urb *urb;
465         u8 *buffer;
466         int err;
467         int i;
468
469         portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
470         if (!portdata)
471                 return -ENOMEM;
472
473         init_usb_anchor(&portdata->delayed);
474
475         for (i = 0; i < N_IN_URB; i++) {
476                 if (!port->bulk_in_size)
477                         break;
478
479                 buffer = (u8 *)__get_free_page(GFP_KERNEL);
480                 if (!buffer)
481                         goto bail_out_error;
482                 portdata->in_buffer[i] = buffer;
483
484                 urb = usb_wwan_setup_urb(port, port->bulk_in_endpointAddress,
485                                                 USB_DIR_IN, port,
486                                                 buffer, IN_BUFLEN,
487                                                 usb_wwan_indat_callback);
488                 portdata->in_urbs[i] = urb;
489         }
490
491         for (i = 0; i < N_OUT_URB; i++) {
492                 if (!port->bulk_out_size)
493                         break;
494
495                 buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
496                 if (!buffer)
497                         goto bail_out_error2;
498                 portdata->out_buffer[i] = buffer;
499
500                 urb = usb_wwan_setup_urb(port, port->bulk_out_endpointAddress,
501                                                 USB_DIR_OUT, port,
502                                                 buffer, OUT_BUFLEN,
503                                                 usb_wwan_outdat_callback);
504                 portdata->out_urbs[i] = urb;
505         }
506
507         usb_set_serial_port_data(port, portdata);
508
509         if (port->interrupt_in_urb) {
510                 err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
511                 if (err)
512                         dev_dbg(&port->dev, "%s: submit irq_in urb failed %d\n",
513                                 __func__, err);
514         }
515
516         return 0;
517
518 bail_out_error2:
519         for (i = 0; i < N_OUT_URB; i++) {
520                 usb_free_urb(portdata->out_urbs[i]);
521                 kfree(portdata->out_buffer[i]);
522         }
523 bail_out_error:
524         for (i = 0; i < N_IN_URB; i++) {
525                 usb_free_urb(portdata->in_urbs[i]);
526                 free_page((unsigned long)portdata->in_buffer[i]);
527         }
528         kfree(portdata);
529
530         return -ENOMEM;
531 }
532 EXPORT_SYMBOL_GPL(usb_wwan_port_probe);
533
534 int usb_wwan_port_remove(struct usb_serial_port *port)
535 {
536         int i;
537         struct usb_wwan_port_private *portdata;
538
539         portdata = usb_get_serial_port_data(port);
540         usb_set_serial_port_data(port, NULL);
541
542         /* Stop reading/writing urbs and free them */
543         for (i = 0; i < N_IN_URB; i++) {
544                 usb_kill_urb(portdata->in_urbs[i]);
545                 usb_free_urb(portdata->in_urbs[i]);
546                 free_page((unsigned long)portdata->in_buffer[i]);
547         }
548         for (i = 0; i < N_OUT_URB; i++) {
549                 usb_kill_urb(portdata->out_urbs[i]);
550                 usb_free_urb(portdata->out_urbs[i]);
551                 kfree(portdata->out_buffer[i]);
552         }
553
554         /* Now free port private data */
555         kfree(portdata);
556         return 0;
557 }
558 EXPORT_SYMBOL(usb_wwan_port_remove);
559
560 #ifdef CONFIG_PM
561 static void stop_read_write_urbs(struct usb_serial *serial)
562 {
563         int i, j;
564         struct usb_serial_port *port;
565         struct usb_wwan_port_private *portdata;
566
567         /* Stop reading/writing urbs */
568         for (i = 0; i < serial->num_ports; ++i) {
569                 port = serial->port[i];
570                 portdata = usb_get_serial_port_data(port);
571                 if (!portdata)
572                         continue;
573                 for (j = 0; j < N_IN_URB; j++)
574                         usb_kill_urb(portdata->in_urbs[j]);
575                 for (j = 0; j < N_OUT_URB; j++)
576                         usb_kill_urb(portdata->out_urbs[j]);
577         }
578 }
579
580 int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message)
581 {
582         struct usb_wwan_intf_private *intfdata = serial->private;
583         int b;
584
585         if (PMSG_IS_AUTO(message)) {
586                 spin_lock_irq(&intfdata->susp_lock);
587                 b = intfdata->in_flight;
588                 spin_unlock_irq(&intfdata->susp_lock);
589
590                 if (b)
591                         return -EBUSY;
592         }
593
594         spin_lock_irq(&intfdata->susp_lock);
595         intfdata->suspended = 1;
596         spin_unlock_irq(&intfdata->susp_lock);
597         stop_read_write_urbs(serial);
598
599         return 0;
600 }
601 EXPORT_SYMBOL(usb_wwan_suspend);
602
603 static void unbusy_queued_urb(struct urb *urb, struct usb_wwan_port_private *portdata)
604 {
605         int i;
606
607         for (i = 0; i < N_OUT_URB; i++) {
608                 if (urb == portdata->out_urbs[i]) {
609                         clear_bit(i, &portdata->out_busy);
610                         break;
611                 }
612         }
613 }
614
615 static void play_delayed(struct usb_serial_port *port)
616 {
617         struct usb_wwan_intf_private *data;
618         struct usb_wwan_port_private *portdata;
619         struct urb *urb;
620         int err;
621
622         portdata = usb_get_serial_port_data(port);
623         data = port->serial->private;
624         while ((urb = usb_get_from_anchor(&portdata->delayed))) {
625                 err = usb_submit_urb(urb, GFP_ATOMIC);
626                 if (!err) {
627                         data->in_flight++;
628                 } else {
629                         /* we have to throw away the rest */
630                         do {
631                                 unbusy_queued_urb(urb, portdata);
632                                 usb_autopm_put_interface_no_suspend(port->serial->interface);
633                         } while ((urb = usb_get_from_anchor(&portdata->delayed)));
634                         break;
635                 }
636         }
637 }
638
639 int usb_wwan_resume(struct usb_serial *serial)
640 {
641         int i, j;
642         struct usb_serial_port *port;
643         struct usb_wwan_intf_private *intfdata = serial->private;
644         struct usb_wwan_port_private *portdata;
645         struct urb *urb;
646         int err = 0;
647
648         /* get the interrupt URBs resubmitted unconditionally */
649         for (i = 0; i < serial->num_ports; i++) {
650                 port = serial->port[i];
651                 if (!port->interrupt_in_urb) {
652                         dev_dbg(&port->dev, "%s: No interrupt URB for port\n", __func__);
653                         continue;
654                 }
655                 err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
656                 dev_dbg(&port->dev, "Submitted interrupt URB for port (result %d)\n", err);
657                 if (err < 0) {
658                         dev_err(&port->dev, "%s: Error %d for interrupt URB\n",
659                                 __func__, err);
660                         goto err_out;
661                 }
662         }
663
664         for (i = 0; i < serial->num_ports; i++) {
665                 /* walk all ports */
666                 port = serial->port[i];
667                 portdata = usb_get_serial_port_data(port);
668
669                 /* skip closed ports */
670                 spin_lock_irq(&intfdata->susp_lock);
671                 if (!portdata || !portdata->opened) {
672                         spin_unlock_irq(&intfdata->susp_lock);
673                         continue;
674                 }
675
676                 for (j = 0; j < N_IN_URB; j++) {
677                         urb = portdata->in_urbs[j];
678                         err = usb_submit_urb(urb, GFP_ATOMIC);
679                         if (err < 0) {
680                                 dev_err(&port->dev, "%s: Error %d for bulk URB %d\n",
681                                         __func__, err, i);
682                                 spin_unlock_irq(&intfdata->susp_lock);
683                                 goto err_out;
684                         }
685                 }
686                 play_delayed(port);
687                 spin_unlock_irq(&intfdata->susp_lock);
688         }
689         spin_lock_irq(&intfdata->susp_lock);
690         intfdata->suspended = 0;
691         spin_unlock_irq(&intfdata->susp_lock);
692 err_out:
693         return err;
694 }
695 EXPORT_SYMBOL(usb_wwan_resume);
696 #endif
697
698 MODULE_AUTHOR(DRIVER_AUTHOR);
699 MODULE_DESCRIPTION(DRIVER_DESC);
700 MODULE_LICENSE("GPL");