drivers/usb/host/xhci-hub.c

   1 /*
   2  * xHCI host controller driver
   3  *
   4  * Copyright (C) 2008 Intel Corp.
   5  *
   6  * Author: Sarah Sharp
   7  * Some code borrowed from the Linux EHCI driver.
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful, but
  14  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  15  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  16  * for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software Foundation,
  20  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  21  */
  22
  23 #include <linux/gfp.h>
  24 #include <asm/unaligned.h>
  25
  26 #include "xhci.h"
  27
  28 #define PORT_WAKE_BITS  (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
  29 #define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
  30                          PORT_RC | PORT_PLC | PORT_PE)
  31
  32 /* usb 1.1 root hub device descriptor */
  33 static u8 usb_bos_descriptor [] = {
  34         USB_DT_BOS_SIZE,                /*  __u8 bLength, 5 bytes */
  35         USB_DT_BOS,                     /*  __u8 bDescriptorType */
  36         0x0F, 0x00,                     /*  __le16 wTotalLength, 15 bytes */
  37         0x1,                            /*  __u8 bNumDeviceCaps */
  38         /* First device capability */
  39         USB_DT_USB_SS_CAP_SIZE,         /*  __u8 bLength, 10 bytes */
  40         USB_DT_DEVICE_CAPABILITY,       /* Device Capability */
  41         USB_SS_CAP_TYPE,                /* bDevCapabilityType, SUPERSPEED_USB */
  42         0x00,                           /* bmAttributes, LTM off by default */
  43         USB_5GBPS_OPERATION, 0x00,      /* wSpeedsSupported, 5Gbps only */
  44         0x03,                           /* bFunctionalitySupport,
  45                                            USB 3.0 speed only */
  46         0x00,                           /* bU1DevExitLat, set later. */
  47         0x00, 0x00                      /* __le16 bU2DevExitLat, set later. */
  48 };
  49
  50
  51 static void xhci_common_hub_descriptor(struct xhci_hcd *xhci,
  52                 struct usb_hub_descriptor *desc, int ports)
  53 {
  54         u16 temp;
  55
  56         desc->bPwrOn2PwrGood = 10;      /* xhci section 5.4.9 says 20ms max */
  57         desc->bHubContrCurrent = 0;
  58
  59         desc->bNbrPorts = ports;
  60         /* Ugh, these should be #defines, FIXME */
  61         /* Using table 11-13 in USB 2.0 spec. */
  62         temp = 0;
  63         /* Bits 1:0 - support port power switching, or power always on */
  64         if (HCC_PPC(xhci->hcc_params))
  65                 temp |= 0x0001;
  66         else
  67                 temp |= 0x0002;
  68         /* Bit  2 - root hubs are not part of a compound device */
  69         /* Bits 4:3 - individual port over current protection */
  70         temp |= 0x0008;
  71         /* Bits 6:5 - no TTs in root ports */
  72         /* Bit  7 - no port indicators */
  73         desc->wHubCharacteristics = cpu_to_le16(temp);
  74 }
  75
  76 /* Fill in the USB 2.0 roothub descriptor */
  77 static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
  78                 struct usb_hub_descriptor *desc)
  79 {
  80         int ports;
  81         u16 temp;
  82         __u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8];
  83         u32 portsc;
  84         unsigned int i;
  85
  86         ports = xhci->num_usb2_ports;
  87
  88         xhci_common_hub_descriptor(xhci, desc, ports);
  89         desc->bDescriptorType = 0x29;
  90         temp = 1 + (ports / 8);
  91         desc->bDescLength = 7 + 2 * temp;
  92
  93         /* The Device Removable bits are reported on a byte granularity.
  94          * If the port doesn't exist within that byte, the bit is set to 0.
  95          */
  96         memset(port_removable, 0, sizeof(port_removable));
  97         for (i = 0; i < ports; i++) {
  98                 portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
  99                 /* If a device is removable, PORTSC reports a 0, same as in the
 100                  * hub descriptor DeviceRemovable bits.
 101                  */
 102                 if (portsc & PORT_DEV_REMOVE)
 103                         /* This math is hairy because bit 0 of DeviceRemovable
 104                          * is reserved, and bit 1 is for port 1, etc.
 105                          */
 106                         port_removable[(i + 1) / 8] |= 1 << ((i + 1) % 8);
 107         }
 108
 109         /* ch11.h defines a hub descriptor that has room for USB_MAXCHILDREN
 110          * ports on it.  The USB 2.0 specification says that there are two
 111          * variable length fields at the end of the hub descriptor:
 112          * DeviceRemovable and PortPwrCtrlMask.  But since we can have less than
 113          * USB_MAXCHILDREN ports, we may need to use the DeviceRemovable array
 114          * to set PortPwrCtrlMask bits.  PortPwrCtrlMask must always be set to
 115          * 0xFF, so we initialize the both arrays (DeviceRemovable and
 116          * PortPwrCtrlMask) to 0xFF.  Then we set the DeviceRemovable for each
 117          * set of ports that actually exist.
 118          */
 119         memset(desc->u.hs.DeviceRemovable, 0xff,
 120                         sizeof(desc->u.hs.DeviceRemovable));
 121         memset(desc->u.hs.PortPwrCtrlMask, 0xff,
 122                         sizeof(desc->u.hs.PortPwrCtrlMask));
 123
 124         for (i = 0; i < (ports + 1 + 7) / 8; i++)
 125                 memset(&desc->u.hs.DeviceRemovable[i], port_removable[i],
 126                                 sizeof(__u8));
 127 }
 128
 129 /* Fill in the USB 3.0 roothub descriptor */
 130 static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 131                 struct usb_hub_descriptor *desc)
 132 {
 133         int ports;
 134         u16 port_removable;
 135         u32 portsc;
 136         unsigned int i;
 137
 138         ports = xhci->num_usb3_ports;
 139         xhci_common_hub_descriptor(xhci, desc, ports);
 140         desc->bDescriptorType = 0x2a;
 141         desc->bDescLength = 12;
 142
 143         /* header decode latency should be zero for roothubs,
 144          * see section 4.23.5.2.
 145          */
 146         desc->u.ss.bHubHdrDecLat = 0;
 147         desc->u.ss.wHubDelay = 0;
 148
 149         port_removable = 0;
 150         /* bit 0 is reserved, bit 1 is for port 1, etc. */
 151         for (i = 0; i < ports; i++) {
 152                 portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
 153                 if (portsc & PORT_DEV_REMOVE)
 154                         port_removable |= 1 << (i + 1);
 155         }
 156         memset(&desc->u.ss.DeviceRemovable,
 157                         (__force __u16) cpu_to_le16(port_removable),
 158                         sizeof(__u16));
 159 }
 160
 161 static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 162                 struct usb_hub_descriptor *desc)
 163 {
 164
 165         if (hcd->speed == HCD_USB3)
 166                 xhci_usb3_hub_descriptor(hcd, xhci, desc);
 167         else
 168                 xhci_usb2_hub_descriptor(hcd, xhci, desc);
 169
 170 }
 171
 172 static unsigned int xhci_port_speed(unsigned int port_status)
 173 {
 174         if (DEV_LOWSPEED(port_status))
 175                 return USB_PORT_STAT_LOW_SPEED;
 176         if (DEV_HIGHSPEED(port_status))
 177                 return USB_PORT_STAT_HIGH_SPEED;
 178         /*
 179          * FIXME: Yes, we should check for full speed, but the core uses that as
 180          * a default in portspeed() in usb/core/hub.c (which is the only place
 181          * USB_PORT_STAT_*_SPEED is used).
 182          */
 183         return 0;
 184 }
 185
 186 /*
 187  * These bits are Read Only (RO) and should be saved and written to the
 188  * registers: 0, 3, 10:13, 30
 189  * connect status, over-current status, port speed, and device removable.
 190  * connect status and port speed are also sticky - meaning they're in
 191  * the AUX well and they aren't changed by a hot, warm, or cold reset.
 192  */
 193 #define XHCI_PORT_RO    ((1<<0) | (1<<3) | (0xf<<10) | (1<<30))
 194 /*
 195  * These bits are RW; writing a 0 clears the bit, writing a 1 sets the bit:
 196  * bits 5:8, 9, 14:15, 25:27
 197  * link state, port power, port indicator state, "wake on" enable state
 198  */
 199 #define XHCI_PORT_RWS   ((0xf<<5) | (1<<9) | (0x3<<14) | (0x7<<25))
 200 /*
 201  * These bits are RW; writing a 1 sets the bit, writing a 0 has no effect:
 202  * bit 4 (port reset)
 203  */
 204 #define XHCI_PORT_RW1S  ((1<<4))
 205 /*
 206  * These bits are RW; writing a 1 clears the bit, writing a 0 has no effect:
 207  * bits 1, 17, 18, 19, 20, 21, 22, 23
 208  * port enable/disable, and
 209  * change bits: connect, PED, warm port reset changed (reserved zero for USB 2.0 ports),
 210  * over-current, reset, link state, and L1 change
 211  */
 212 #define XHCI_PORT_RW1CS ((1<<1) | (0x7f<<17))
 213 /*
 214  * Bit 16 is RW, and writing a '1' to it causes the link state control to be
 215  * latched in
 216  */
 217 #define XHCI_PORT_RW    ((1<<16))
 218 /*
 219  * These bits are Reserved Zero (RsvdZ) and zero should be written to them:
 220  * bits 2, 24, 28:31
 221  */
 222 #define XHCI_PORT_RZ    ((1<<2) | (1<<24) | (0xf<<28))
 223
 224 /*
 225  * Given a port state, this function returns a value that would result in the
 226  * port being in the same state, if the value was written to the port status
 227  * control register.
 228  * Save Read Only (RO) bits and save read/write bits where
 229  * writing a 0 clears the bit and writing a 1 sets the bit (RWS).
 230  * For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
 231  */
 232 u32 xhci_port_state_to_neutral(u32 state)
 233 {
 234         /* Save read-only status and port state */
 235         return (state & XHCI_PORT_RO) | (state & XHCI_PORT_RWS);
 236 }
 237
 238 /*
 239  * find slot id based on port number.
 240  * @port: The one-based port number from one of the two split roothubs.
 241  */
 242 int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 243                 u16 port)
 244 {
 245         int slot_id;
 246         int i;
 247         enum usb_device_speed speed;
 248
 249         slot_id = 0;
 250         for (i = 0; i < MAX_HC_SLOTS; i++) {
 251                 if (!xhci->devs[i])
 252                         continue;
 253                 speed = xhci->devs[i]->udev->speed;
 254                 if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3))
 255                                 && xhci->devs[i]->fake_port == port) {
 256                         slot_id = i;
 257                         break;
 258                 }
 259         }
 260
 261         return slot_id;
 262 }
 263
 264 /*
 265  * Stop device
 266  * It issues stop endpoint command for EP 0 to 30. And wait the last command
 267  * to complete.
 268  * suspend will set to 1, if suspend bit need to set in command.
 269  */
 270 static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
 271 {
 272         struct xhci_virt_device *virt_dev;
 273         struct xhci_command *cmd;
 274         unsigned long flags;
 275         int timeleft;
 276         int ret;
 277         int i;
 278
 279         ret = 0;
 280         virt_dev = xhci->devs[slot_id];
 281         cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO);
 282         if (!cmd) {
 283                 xhci_dbg(xhci, "Couldn't allocate command structure.\n");
 284                 return -ENOMEM;
 285         }
 286
 287         spin_lock_irqsave(&xhci->lock, flags);
 288         for (i = LAST_EP_INDEX; i > 0; i--) {
 289                 if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue)
 290                         xhci_queue_stop_endpoint(xhci, slot_id, i, suspend);
 291         }
 292         cmd->command_trb = xhci->cmd_ring->enqueue;
 293         list_add_tail(&cmd->cmd_list, &virt_dev->cmd_list);
 294         xhci_queue_stop_endpoint(xhci, slot_id, 0, suspend);
 295         xhci_ring_cmd_db(xhci);
 296         spin_unlock_irqrestore(&xhci->lock, flags);
 297
 298         /* Wait for last stop endpoint command to finish */
 299         timeleft = wait_for_completion_interruptible_timeout(
 300                         cmd->completion,
 301                         USB_CTRL_SET_TIMEOUT);
 302         if (timeleft <= 0) {
 303                 xhci_warn(xhci, "%s while waiting for stop endpoint command\n",
 304                                 timeleft == 0 ? "Timeout" : "Signal");
 305                 spin_lock_irqsave(&xhci->lock, flags);
 306                 /* The timeout might have raced with the event ring handler, so
 307                  * only delete from the list if the item isn't poisoned.
 308                  */
 309                 if (cmd->cmd_list.next != LIST_POISON1)
 310                         list_del(&cmd->cmd_list);
 311                 spin_unlock_irqrestore(&xhci->lock, flags);
 312                 ret = -ETIME;
 313                 goto command_cleanup;
 314         }
 315
 316 command_cleanup:
 317         xhci_free_command(xhci, cmd);
 318         return ret;
 319 }
 320
 321 /*
 322  * Ring device, it rings the all doorbells unconditionally.
 323  */
 324 void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
 325 {
 326         int i;
 327
 328         for (i = 0; i < LAST_EP_INDEX + 1; i++)
 329                 if (xhci->devs[slot_id]->eps[i].ring &&
 330                     xhci->devs[slot_id]->eps[i].ring->dequeue)
 331                         xhci_ring_ep_doorbell(xhci, slot_id, i, 0);
 332
 333         return;
 334 }
 335
 336 static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 337                 u16 wIndex, __le32 __iomem *addr, u32 port_status)
 338 {
 339         /* Don't allow the USB core to disable SuperSpeed ports. */
 340         if (hcd->speed == HCD_USB3) {
 341                 xhci_dbg(xhci, "Ignoring request to disable "
 342                                 "SuperSpeed port.\n");
 343                 return;
 344         }
 345
 346         /* Write 1 to disable the port */
 347         xhci_writel(xhci, port_status | PORT_PE, addr);
 348         port_status = xhci_readl(xhci, addr);
 349         xhci_dbg(xhci, "disable port, actual port %d status  = 0x%x\n",
 350                         wIndex, port_status);
 351 }
 352
 353 static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue,
 354                 u16 wIndex, __le32 __iomem *addr, u32 port_status)
 355 {
 356         char *port_change_bit;
 357         u32 status;
 358
 359         switch (wValue) {
 360         case USB_PORT_FEAT_C_RESET:
 361                 status = PORT_RC;
 362                 port_change_bit = "reset";
 363                 break;
 364         case USB_PORT_FEAT_C_BH_PORT_RESET:
 365                 status = PORT_WRC;
 366                 port_change_bit = "warm(BH) reset";
 367                 break;
 368         case USB_PORT_FEAT_C_CONNECTION:
 369                 status = PORT_CSC;
 370                 port_change_bit = "connect";
 371                 break;
 372         case USB_PORT_FEAT_C_OVER_CURRENT:
 373                 status = PORT_OCC;
 374                 port_change_bit = "over-current";
 375                 break;
 376         case USB_PORT_FEAT_C_ENABLE:
 377                 status = PORT_PEC;
 378                 port_change_bit = "enable/disable";
 379                 break;
 380         case USB_PORT_FEAT_C_SUSPEND:
 381                 status = PORT_PLC;
 382                 port_change_bit = "suspend/resume";
 383                 break;
 384         case USB_PORT_FEAT_C_PORT_LINK_STATE:
 385                 status = PORT_PLC;
 386                 port_change_bit = "link state";
 387                 break;
 388         default:
 389                 /* Should never happen */
 390                 return;
 391         }
 392         /* Change bits are all write 1 to clear */
 393         xhci_writel(xhci, port_status | status, addr);
 394         port_status = xhci_readl(xhci, addr);
 395         xhci_dbg(xhci, "clear port %s change, actual port %d status  = 0x%x\n",
 396                         port_change_bit, wIndex, port_status);
 397 }
 398
 399 static int xhci_get_ports(struct usb_hcd *hcd, __le32 __iomem ***port_array)
 400 {
 401         int max_ports;
 402         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 403
 404         if (hcd->speed == HCD_USB3) {
 405                 max_ports = xhci->num_usb3_ports;
 406                 *port_array = xhci->usb3_ports;
 407         } else {
 408                 max_ports = xhci->num_usb2_ports;
 409                 *port_array = xhci->usb2_ports;
 410         }
 411
 412         return max_ports;
 413 }
 414
 415 void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
 416                                 int port_id, u32 link_state)
 417 {
 418         u32 temp;
 419
 420         temp = xhci_readl(xhci, port_array[port_id]);
 421         temp = xhci_port_state_to_neutral(temp);
 422         temp &= ~PORT_PLS_MASK;
 423         temp |= PORT_LINK_STROBE | link_state;
 424         xhci_writel(xhci, temp, port_array[port_id]);
 425 }
 426
 427 /* Test and clear port RWC bit */
 428 void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
 429                                 int port_id, u32 port_bit)
 430 {
 431         u32 temp;
 432
 433         temp = xhci_readl(xhci, port_array[port_id]);
 434         if (temp & port_bit) {
 435                 temp = xhci_port_state_to_neutral(temp);
 436                 temp |= port_bit;
 437                 xhci_writel(xhci, temp, port_array[port_id]);
 438         }
 439 }
 440
 441 /* Updates Link Status for super Speed port */
 442 static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
 443 {
 444         u32 pls = status_reg & PORT_PLS_MASK;
 445
 446         /* resume state is a xHCI internal state.
 447          * Do not report it to usb core.
 448          */
 449         if (pls == XDEV_RESUME)
 450                 return;
 451
 452         /* When the CAS bit is set then warm reset
 453          * should be performed on port
 454          */
 455         if (status_reg & PORT_CAS) {
 456                 /* The CAS bit can be set while the port is
 457                  * in any link state.
 458                  * Only roothubs have CAS bit, so we
 459                  * pretend to be in compliance mode
 460                  * unless we're already in compliance
 461                  * or the inactive state.
 462                  */
 463                 if (pls != USB_SS_PORT_LS_COMP_MOD &&
 464                     pls != USB_SS_PORT_LS_SS_INACTIVE) {
 465                         pls = USB_SS_PORT_LS_COMP_MOD;
 466                 }
 467                 /* Return also connection bit -
 468                  * hub state machine resets port
 469                  * when this bit is set.
 470                  */
 471                 pls |= USB_PORT_STAT_CONNECTION;
 472         }
 473         /* update status field */
 474         *status |= pls;
 475 }
 476
 477 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 478                 u16 wIndex, char *buf, u16 wLength)
 479 {
 480         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 481         int max_ports;
 482         unsigned long flags;
 483         u32 temp, status;
 484         int retval = 0;
 485         __le32 __iomem **port_array;
 486         int slot_id;
 487         struct xhci_bus_state *bus_state;
 488         u16 link_state = 0;
 489
 490         max_ports = xhci_get_ports(hcd, &port_array);
 491         bus_state = &xhci->bus_state[hcd_index(hcd)];
 492
 493         spin_lock_irqsave(&xhci->lock, flags);
 494         switch (typeReq) {
 495         case GetHubStatus:
 496                 /* No power source, over-current reported per port */
 497                 memset(buf, 0, 4);
 498                 break;
 499         case GetHubDescriptor:
 500                 /* Check to make sure userspace is asking for the USB 3.0 hub
 501                  * descriptor for the USB 3.0 roothub.  If not, we stall the
 502                  * endpoint, like external hubs do.
 503                  */
 504                 if (hcd->speed == HCD_USB3 &&
 505                                 (wLength < USB_DT_SS_HUB_SIZE ||
 506                                  wValue != (USB_DT_SS_HUB << 8))) {
 507                         xhci_dbg(xhci, "Wrong hub descriptor type for "
 508                                         "USB 3.0 roothub.\n");
 509                         goto error;
 510                 }
 511                 xhci_hub_descriptor(hcd, xhci,
 512                                 (struct usb_hub_descriptor *) buf);
 513                 break;
 514         case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
 515                 if ((wValue & 0xff00) != (USB_DT_BOS << 8))
 516                         goto error;
 517
 518                 if (hcd->speed != HCD_USB3)
 519                         goto error;
 520
 521                 memcpy(buf, &usb_bos_descriptor,
 522                                 USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE);
 523                 temp = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
 524                 buf[12] = HCS_U1_LATENCY(temp);
 525                 put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]);
 526
 527                 spin_unlock_irqrestore(&xhci->lock, flags);
 528                 return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE;
 529         case GetPortStatus:
 530                 if (!wIndex || wIndex > max_ports)
 531                         goto error;
 532                 wIndex--;
 533                 status = 0;
 534                 temp = xhci_readl(xhci, port_array[wIndex]);
 535                 if (temp == 0xffffffff) {
 536                         retval = -ENODEV;
 537                         break;
 538                 }
 539                 xhci_dbg(xhci, "get port status, actual port %d status  = 0x%x\n", wIndex, temp);
 540
 541                 /* wPortChange bits */
 542                 if (temp & PORT_CSC)
 543                         status |= USB_PORT_STAT_C_CONNECTION << 16;
 544                 if (temp & PORT_PEC)
 545                         status |= USB_PORT_STAT_C_ENABLE << 16;
 546                 if ((temp & PORT_OCC))
 547                         status |= USB_PORT_STAT_C_OVERCURRENT << 16;
 548                 if ((temp & PORT_RC))
 549                         status |= USB_PORT_STAT_C_RESET << 16;
 550                 /* USB3.0 only */
 551                 if (hcd->speed == HCD_USB3) {
 552                         if ((temp & PORT_PLC))
 553                                 status |= USB_PORT_STAT_C_LINK_STATE << 16;
 554                         if ((temp & PORT_WRC))
 555                                 status |= USB_PORT_STAT_C_BH_RESET << 16;
 556                 }
 557
 558                 if (hcd->speed != HCD_USB3) {
 559                         if ((temp & PORT_PLS_MASK) == XDEV_U3
 560                                         && (temp & PORT_POWER))
 561                                 status |= USB_PORT_STAT_SUSPEND;
 562                 }
 563                 if ((temp & PORT_PLS_MASK) == XDEV_RESUME &&
 564                                 !DEV_SUPERSPEED(temp)) {
 565                         if ((temp & PORT_RESET) || !(temp & PORT_PE))
 566                                 goto error;
 567                         if (time_after_eq(jiffies,
 568                                         bus_state->resume_done[wIndex])) {
 569                                 xhci_dbg(xhci, "Resume USB2 port %d\n",
 570                                         wIndex + 1);
 571                                 bus_state->resume_done[wIndex] = 0;
 572                                 xhci_set_link_state(xhci, port_array, wIndex,
 573                                                         XDEV_U0);
 574                                 xhci_dbg(xhci, "set port %d resume\n",
 575                                         wIndex + 1);
 576                                 slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 577                                                                  wIndex + 1);
 578                                 if (!slot_id) {
 579                                         xhci_dbg(xhci, "slot_id is zero\n");
 580                                         goto error;
 581                                 }
 582                                 xhci_ring_device(xhci, slot_id);
 583                                 bus_state->port_c_suspend |= 1 << wIndex;
 584                                 bus_state->suspended_ports &= ~(1 << wIndex);
 585                         } else {
 586                                 /*
 587                                  * The resume has been signaling for less than
 588                                  * 20ms. Report the port status as SUSPEND,
 589                                  * let the usbcore check port status again
 590                                  * and clear resume signaling later.
 591                                  */
 592                                 status |= USB_PORT_STAT_SUSPEND;
 593                         }
 594                 }
 595                 if ((temp & PORT_PLS_MASK) == XDEV_U0
 596                         && (temp & PORT_POWER)
 597                         && (bus_state->suspended_ports & (1 << wIndex))) {
 598                         bus_state->suspended_ports &= ~(1 << wIndex);
 599                         if (hcd->speed != HCD_USB3)
 600                                 bus_state->port_c_suspend |= 1 << wIndex;
 601                 }
 602                 if (temp & PORT_CONNECT) {
 603                         status |= USB_PORT_STAT_CONNECTION;
 604                         status |= xhci_port_speed(temp);
 605                 }
 606                 if (temp & PORT_PE)
 607                         status |= USB_PORT_STAT_ENABLE;
 608                 if (temp & PORT_OC)
 609                         status |= USB_PORT_STAT_OVERCURRENT;
 610                 if (temp & PORT_RESET)
 611                         status |= USB_PORT_STAT_RESET;
 612                 if (temp & PORT_POWER) {
 613                         if (hcd->speed == HCD_USB3)
 614                                 status |= USB_SS_PORT_STAT_POWER;
 615                         else
 616                                 status |= USB_PORT_STAT_POWER;
 617                 }
 618                 /* Update Port Link State for super speed ports*/
 619                 if (hcd->speed == HCD_USB3) {
 620                         xhci_hub_report_link_state(&status, temp);
 621                 }
 622                 if (bus_state->port_c_suspend & (1 << wIndex))
 623                         status |= 1 << USB_PORT_FEAT_C_SUSPEND;
 624                 xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
 625                 put_unaligned(cpu_to_le32(status), (__le32 *) buf);
 626                 break;
 627         case SetPortFeature:
 628                 if (wValue == USB_PORT_FEAT_LINK_STATE)
 629                         link_state = (wIndex & 0xff00) >> 3;
 630                 wIndex &= 0xff;
 631                 if (!wIndex || wIndex > max_ports)
 632                         goto error;
 633                 wIndex--;
 634                 temp = xhci_readl(xhci, port_array[wIndex]);
 635                 if (temp == 0xffffffff) {
 636                         retval = -ENODEV;
 637                         break;
 638                 }
 639                 temp = xhci_port_state_to_neutral(temp);
 640                 /* FIXME: What new port features do we need to support? */
 641                 switch (wValue) {
 642                 case USB_PORT_FEAT_SUSPEND:
 643                         temp = xhci_readl(xhci, port_array[wIndex]);
 644                         if ((temp & PORT_PLS_MASK) != XDEV_U0) {
 645                                 /* Resume the port to U0 first */
 646                                 xhci_set_link_state(xhci, port_array, wIndex,
 647                                                         XDEV_U0);
 648                                 spin_unlock_irqrestore(&xhci->lock, flags);
 649                                 msleep(10);
 650                                 spin_lock_irqsave(&xhci->lock, flags);
 651                         }
 652                         /* In spec software should not attempt to suspend
 653                          * a port unless the port reports that it is in the
 654                          * enabled (PED = ‘1’,PLS < ‘3’) state.
 655                          */
 656                         temp = xhci_readl(xhci, port_array[wIndex]);
 657                         if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
 658                                 || (temp & PORT_PLS_MASK) >= XDEV_U3) {
 659                                 xhci_warn(xhci, "USB core suspending device "
 660                                           "not in U0/U1/U2.\n");
 661                                 goto error;
 662                         }
 663
 664                         slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 665                                         wIndex + 1);
 666                         if (!slot_id) {
 667                                 xhci_warn(xhci, "slot_id is zero\n");
 668                                 goto error;
 669                         }
 670                         /* unlock to execute stop endpoint commands */
 671                         spin_unlock_irqrestore(&xhci->lock, flags);
 672                         xhci_stop_device(xhci, slot_id, 1);
 673                         spin_lock_irqsave(&xhci->lock, flags);
 674
 675                         xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3);
 676
 677                         spin_unlock_irqrestore(&xhci->lock, flags);
 678                         msleep(10); /* wait device to enter */
 679                         spin_lock_irqsave(&xhci->lock, flags);
 680
 681                         temp = xhci_readl(xhci, port_array[wIndex]);
 682                         bus_state->suspended_ports |= 1 << wIndex;
 683                         break;
 684                 case USB_PORT_FEAT_LINK_STATE:
 685                         temp = xhci_readl(xhci, port_array[wIndex]);
 686                         /* Software should not attempt to set
 687                          * port link state above '5' (Rx.Detect) and the port
 688                          * must be enabled.
 689                          */
 690                         if ((temp & PORT_PE) == 0 ||
 691                                 (link_state > USB_SS_PORT_LS_RX_DETECT)) {
 692                                 xhci_warn(xhci, "Cannot set link state.\n");
 693                                 goto error;
 694                         }
 695
 696                         if (link_state == USB_SS_PORT_LS_U3) {
 697                                 slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 698                                                 wIndex + 1);
 699                                 if (slot_id) {
 700                                         /* unlock to execute stop endpoint
 701                                          * commands */
 702                                         spin_unlock_irqrestore(&xhci->lock,
 703                                                                 flags);
 704                                         xhci_stop_device(xhci, slot_id, 1);
 705                                         spin_lock_irqsave(&xhci->lock, flags);
 706                                 }
 707                         }
 708
 709                         xhci_set_link_state(xhci, port_array, wIndex,
 710                                                 link_state);
 711
 712                         spin_unlock_irqrestore(&xhci->lock, flags);
 713                         msleep(20); /* wait device to enter */
 714                         spin_lock_irqsave(&xhci->lock, flags);
 715
 716                         temp = xhci_readl(xhci, port_array[wIndex]);
 717                         if (link_state == USB_SS_PORT_LS_U3)
 718                                 bus_state->suspended_ports |= 1 << wIndex;
 719                         break;
 720                 case USB_PORT_FEAT_POWER:
 721                         /*
 722                          * Turn on ports, even if there isn't per-port switching.
 723                          * HC will report connect events even before this is set.
 724                          * However, khubd will ignore the roothub events until
 725                          * the roothub is registered.
 726                          */
 727                         xhci_writel(xhci, temp | PORT_POWER,
 728                                         port_array[wIndex]);
 729
 730                         temp = xhci_readl(xhci, port_array[wIndex]);
 731                         xhci_dbg(xhci, "set port power, actual port %d status  = 0x%x\n", wIndex, temp);
 732                         break;
 733                 case USB_PORT_FEAT_RESET:
 734                         temp = (temp | PORT_RESET);
 735                         xhci_writel(xhci, temp, port_array[wIndex]);
 736
 737                         temp = xhci_readl(xhci, port_array[wIndex]);
 738                         xhci_dbg(xhci, "set port reset, actual port %d status  = 0x%x\n", wIndex, temp);
 739                         break;
 740                 case USB_PORT_FEAT_BH_PORT_RESET:
 741                         temp |= PORT_WR;
 742                         xhci_writel(xhci, temp, port_array[wIndex]);
 743
 744                         temp = xhci_readl(xhci, port_array[wIndex]);
 745                         break;
 746                 default:
 747                         goto error;
 748                 }
 749                 /* unblock any posted writes */
 750                 temp = xhci_readl(xhci, port_array[wIndex]);
 751                 break;
 752         case ClearPortFeature:
 753                 if (!wIndex || wIndex > max_ports)
 754                         goto error;
 755                 wIndex--;
 756                 temp = xhci_readl(xhci, port_array[wIndex]);
 757                 if (temp == 0xffffffff) {
 758                         retval = -ENODEV;
 759                         break;
 760                 }
 761                 /* FIXME: What new port features do we need to support? */
 762                 temp = xhci_port_state_to_neutral(temp);
 763                 switch (wValue) {
 764                 case USB_PORT_FEAT_SUSPEND:
 765                         temp = xhci_readl(xhci, port_array[wIndex]);
 766                         xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
 767                         xhci_dbg(xhci, "PORTSC %04x\n", temp);
 768                         if (temp & PORT_RESET)
 769                                 goto error;
 770                         if ((temp & PORT_PLS_MASK) == XDEV_U3) {
 771                                 if ((temp & PORT_PE) == 0)
 772                                         goto error;
 773
 774                                 xhci_set_link_state(xhci, port_array, wIndex,
 775                                                         XDEV_RESUME);
 776                                 spin_unlock_irqrestore(&xhci->lock, flags);
 777                                 msleep(20);
 778                                 spin_lock_irqsave(&xhci->lock, flags);
 779                                 xhci_set_link_state(xhci, port_array, wIndex,
 780                                                         XDEV_U0);
 781                         }
 782                         bus_state->port_c_suspend |= 1 << wIndex;
 783
 784                         slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 785                                         wIndex + 1);
 786                         if (!slot_id) {
 787                                 xhci_dbg(xhci, "slot_id is zero\n");
 788                                 goto error;
 789                         }
 790                         xhci_ring_device(xhci, slot_id);
 791                         break;
 792                 case USB_PORT_FEAT_C_SUSPEND:
 793                         bus_state->port_c_suspend &= ~(1 << wIndex);
 794                 case USB_PORT_FEAT_C_RESET:
 795                 case USB_PORT_FEAT_C_BH_PORT_RESET:
 796                 case USB_PORT_FEAT_C_CONNECTION:
 797                 case USB_PORT_FEAT_C_OVER_CURRENT:
 798                 case USB_PORT_FEAT_C_ENABLE:
 799                 case USB_PORT_FEAT_C_PORT_LINK_STATE:
 800                         xhci_clear_port_change_bit(xhci, wValue, wIndex,
 801                                         port_array[wIndex], temp);
 802                         break;
 803                 case USB_PORT_FEAT_ENABLE:
 804                         xhci_disable_port(hcd, xhci, wIndex,
 805                                         port_array[wIndex], temp);
 806                         break;
 807                 default:
 808                         goto error;
 809                 }
 810                 break;
 811         default:
 812 error:
 813                 /* "stall" on error */
 814                 retval = -EPIPE;
 815         }
 816         spin_unlock_irqrestore(&xhci->lock, flags);
 817         return retval;
 818 }
 819
 820 /*
 821  * Returns 0 if the status hasn't changed, or the number of bytes in buf.
 822  * Ports are 0-indexed from the HCD point of view,
 823  * and 1-indexed from the USB core pointer of view.
 824  *
 825  * Note that the status change bits will be cleared as soon as a port status
 826  * change event is generated, so we use the saved status from that event.
 827  */
 828 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf)
 829 {
 830         unsigned long flags;
 831         u32 temp, status;
 832         u32 mask;
 833         int i, retval;
 834         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 835         int max_ports;
 836         __le32 __iomem **port_array;
 837         struct xhci_bus_state *bus_state;
 838
 839         max_ports = xhci_get_ports(hcd, &port_array);
 840         bus_state = &xhci->bus_state[hcd_index(hcd)];
 841
 842         /* Initial status is no changes */
 843         retval = (max_ports + 8) / 8;
 844         memset(buf, 0, retval);
 845         status = 0;
 846
 847         mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC;
 848
 849         spin_lock_irqsave(&xhci->lock, flags);
 850         /* For each port, did anything change?  If so, set that bit in buf. */
 851         for (i = 0; i < max_ports; i++) {
 852                 temp = xhci_readl(xhci, port_array[i]);
 853                 if (temp == 0xffffffff) {
 854                         retval = -ENODEV;
 855                         break;
 856                 }
 857                 if ((temp & mask) != 0 ||
 858                         (bus_state->port_c_suspend & 1 << i) ||
 859                         (bus_state->resume_done[i] && time_after_eq(
 860                             jiffies, bus_state->resume_done[i]))) {
 861                         buf[(i + 1) / 8] |= 1 << (i + 1) % 8;
 862                         status = 1;
 863                 }
 864         }
 865         spin_unlock_irqrestore(&xhci->lock, flags);
 866         return status ? retval : 0;
 867 }
 868
 869 #ifdef CONFIG_PM
 870
 871 int xhci_bus_suspend(struct usb_hcd *hcd)
 872 {
 873         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 874         int max_ports, port_index;
 875         __le32 __iomem **port_array;
 876         struct xhci_bus_state *bus_state;
 877         unsigned long flags;
 878
 879         max_ports = xhci_get_ports(hcd, &port_array);
 880         bus_state = &xhci->bus_state[hcd_index(hcd)];
 881
 882         spin_lock_irqsave(&xhci->lock, flags);
 883
 884         if (hcd->self.root_hub->do_remote_wakeup) {
 885                 port_index = max_ports;
 886                 while (port_index--) {
 887                         if (bus_state->resume_done[port_index] != 0) {
 888                                 spin_unlock_irqrestore(&xhci->lock, flags);
 889                                 xhci_dbg(xhci, "suspend failed because "
 890                                                 "port %d is resuming\n",
 891                                                 port_index + 1);
 892                                 return -EBUSY;
 893                         }
 894                 }
 895         }
 896
 897         port_index = max_ports;
 898         bus_state->bus_suspended = 0;
 899         while (port_index--) {
 900                 /* suspend the port if the port is not suspended */
 901                 u32 t1, t2;
 902                 int slot_id;
 903
 904                 t1 = xhci_readl(xhci, port_array[port_index]);
 905                 t2 = xhci_port_state_to_neutral(t1);
 906
 907                 if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) {
 908                         xhci_dbg(xhci, "port %d not suspended\n", port_index);
 909                         slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 910                                         port_index + 1);
 911                         if (slot_id) {
 912                                 spin_unlock_irqrestore(&xhci->lock, flags);
 913                                 xhci_stop_device(xhci, slot_id, 1);
 914                                 spin_lock_irqsave(&xhci->lock, flags);
 915                         }
 916                         t2 &= ~PORT_PLS_MASK;
 917                         t2 |= PORT_LINK_STROBE | XDEV_U3;
 918                         set_bit(port_index, &bus_state->bus_suspended);
 919                 }
 920                 if (hcd->self.root_hub->do_remote_wakeup) {
 921                         if (t1 & PORT_CONNECT) {
 922                                 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
 923                                 t2 &= ~PORT_WKCONN_E;
 924                         } else {
 925                                 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
 926                                 t2 &= ~PORT_WKDISC_E;
 927                         }
 928                 } else
 929                         t2 &= ~PORT_WAKE_BITS;
 930
 931                 t1 = xhci_port_state_to_neutral(t1);
 932                 if (t1 != t2)
 933                         xhci_writel(xhci, t2, port_array[port_index]);
 934
 935                 if (hcd->speed != HCD_USB3) {
 936                         /* enable remote wake up for USB 2.0 */
 937                         __le32 __iomem *addr;
 938                         u32 tmp;
 939
 940                         /* Add one to the port status register address to get
 941                          * the port power control register address.
 942                          */
 943                         addr = port_array[port_index] + 1;
 944                         tmp = xhci_readl(xhci, addr);
 945                         tmp |= PORT_RWE;
 946                         xhci_writel(xhci, tmp, addr);
 947                 }
 948         }
 949         hcd->state = HC_STATE_SUSPENDED;
 950         bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
 951         spin_unlock_irqrestore(&xhci->lock, flags);
 952         return 0;
 953 }
 954
 955 int xhci_bus_resume(struct usb_hcd *hcd)
 956 {
 957         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 958         int max_ports, port_index;
 959         __le32 __iomem **port_array;
 960         struct xhci_bus_state *bus_state;
 961         u32 temp;
 962         unsigned long flags;
 963
 964         max_ports = xhci_get_ports(hcd, &port_array);
 965         bus_state = &xhci->bus_state[hcd_index(hcd)];
 966
 967         if (time_before(jiffies, bus_state->next_statechange))
 968                 msleep(5);
 969
 970         spin_lock_irqsave(&xhci->lock, flags);
 971         if (!HCD_HW_ACCESSIBLE(hcd)) {
 972                 spin_unlock_irqrestore(&xhci->lock, flags);
 973                 return -ESHUTDOWN;
 974         }
 975
 976         /* delay the irqs */
 977         temp = xhci_readl(xhci, &xhci->op_regs->command);
 978         temp &= ~CMD_EIE;
 979         xhci_writel(xhci, temp, &xhci->op_regs->command);
 980
 981         port_index = max_ports;
 982         while (port_index--) {
 983                 /* Check whether need resume ports. If needed
 984                    resume port and disable remote wakeup */
 985                 u32 temp;
 986                 int slot_id;
 987
 988                 temp = xhci_readl(xhci, port_array[port_index]);
 989                 if (DEV_SUPERSPEED(temp))
 990                         temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
 991                 else
 992                         temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
 993                 if (test_bit(port_index, &bus_state->bus_suspended) &&
 994                     (temp & PORT_PLS_MASK)) {
 995                         if (DEV_SUPERSPEED(temp)) {
 996                                 xhci_set_link_state(xhci, port_array,
 997                                                         port_index, XDEV_U0);
 998                         } else {
 999                                 xhci_set_link_state(xhci, port_array,
1000                                                 port_index, XDEV_RESUME);
1001
1002                                 spin_unlock_irqrestore(&xhci->lock, flags);
1003                                 msleep(20);
1004                                 spin_lock_irqsave(&xhci->lock, flags);
1005
1006                                 xhci_set_link_state(xhci, port_array,
1007                                                         port_index, XDEV_U0);
1008                         }
1009                         /* wait for the port to enter U0 and report port link
1010                          * state change.
1011                          */
1012                         spin_unlock_irqrestore(&xhci->lock, flags);
1013                         msleep(20);
1014                         spin_lock_irqsave(&xhci->lock, flags);
1015
1016                         /* Clear PLC */
1017                         xhci_test_and_clear_bit(xhci, port_array, port_index,
1018                                                 PORT_PLC);
1019
1020                         slot_id = xhci_find_slot_id_by_port(hcd,
1021                                         xhci, port_index + 1);
1022                         if (slot_id)
1023                                 xhci_ring_device(xhci, slot_id);
1024                 } else
1025                         xhci_writel(xhci, temp, port_array[port_index]);
1026
1027                 if (hcd->speed != HCD_USB3) {
1028                         /* disable remote wake up for USB 2.0 */
1029                         __le32 __iomem *addr;
1030                         u32 tmp;
1031
1032                         /* Add one to the port status register address to get
1033                          * the port power control register address.
1034                          */
1035                         addr = port_array[port_index] + 1;
1036                         tmp = xhci_readl(xhci, addr);
1037                         tmp &= ~PORT_RWE;
1038                         xhci_writel(xhci, tmp, addr);
1039                 }
1040         }
1041
1042         (void) xhci_readl(xhci, &xhci->op_regs->command);
1043
1044         bus_state->next_statechange = jiffies + msecs_to_jiffies(5);
1045         /* re-enable irqs */
1046         temp = xhci_readl(xhci, &xhci->op_regs->command);
1047         temp |= CMD_EIE;
1048         xhci_writel(xhci, temp, &xhci->op_regs->command);
1049         temp = xhci_readl(xhci, &xhci->op_regs->command);
1050
1051         spin_unlock_irqrestore(&xhci->lock, flags);
1052         return 0;
1053 }
1054
1055 #endif  /* CONFIG_PM */