2 * Copyright (C) 2001-2004 by David Brownell
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 /* this file is part of ehci-hcd.c */
21 /*-------------------------------------------------------------------------*/
24 * EHCI hardware queue manipulation ... the core. QH/QTD manipulation.
26 * Control, bulk, and interrupt traffic all use "qh" lists. They list "qtd"
27 * entries describing USB transactions, max 16-20kB/entry (with 4kB-aligned
28 * buffers needed for the larger number). We use one QH per endpoint, queue
29 * multiple urbs (all three types) per endpoint. URBs may need several qtds.
31 * ISO traffic uses "ISO TD" (itd, and sitd) records, and (along with
32 * interrupts) needs careful scheduling. Performance improvements can be
33 * an ongoing challenge. That's in "ehci-sched.c".
35 * USB 1.1 devices are handled (a) by "companion" OHCI or UHCI root hubs,
36 * or otherwise through transaction translators (TTs) in USB 2.0 hubs using
37 * (b) special fields in qh entries or (c) split iso entries. TTs will
38 * buffer low/full speed data so the host collects it at high speed.
41 /*-------------------------------------------------------------------------*/
43 /* fill a qtd, returning how much of the buffer we were able to queue up */
46 qtd_fill(struct ehci_hcd *ehci, struct ehci_qtd *qtd, dma_addr_t buf,
47 size_t len, int token, int maxpacket)
52 /* one buffer entry per 4K ... first might be short or unaligned */
53 qtd->hw_buf[0] = cpu_to_hc32(ehci, (u32)addr);
54 qtd->hw_buf_hi[0] = cpu_to_hc32(ehci, (u32)(addr >> 32));
55 count = 0x1000 - (buf & 0x0fff); /* rest of that page */
56 if (likely (len < count)) /* ... iff needed */
62 /* per-qtd limit: from 16K to 20K (best alignment) */
63 for (i = 1; count < len && i < 5; i++) {
65 qtd->hw_buf[i] = cpu_to_hc32(ehci, (u32)addr);
66 qtd->hw_buf_hi[i] = cpu_to_hc32(ehci,
69 if ((count + 0x1000) < len)
75 /* short packets may only terminate transfers */
77 count -= (count % maxpacket);
79 qtd->hw_token = cpu_to_hc32(ehci, (count << 16) | token);
85 /*-------------------------------------------------------------------------*/
88 qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd)
90 struct ehci_qh_hw *hw = qh->hw;
92 /* writes to an active overlay are unsafe */
93 BUG_ON(qh->qh_state != QH_STATE_IDLE);
95 hw->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma);
96 hw->hw_alt_next = EHCI_LIST_END(ehci);
98 /* Except for control endpoints, we make hardware maintain data
99 * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
100 * and set the pseudo-toggle in udev. Only usb_clear_halt() will
103 if (!(hw->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
104 unsigned is_out, epnum;
107 epnum = (hc32_to_cpup(ehci, &hw->hw_info1) >> 8) & 0x0f;
108 if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
109 hw->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
110 usb_settoggle (qh->dev, epnum, is_out, 1);
114 hw->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
117 /* if it weren't for a common silicon quirk (writing the dummy into the qh
118 * overlay, so qh->hw_token wrongly becomes inactive/halted), only fault
119 * recovery (including urb dequeue) would need software changes to a QH...
122 qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
124 struct ehci_qtd *qtd;
126 if (list_empty (&qh->qtd_list))
129 qtd = list_entry (qh->qtd_list.next,
130 struct ehci_qtd, qtd_list);
132 * first qtd may already be partially processed.
133 * If we come here during unlink, the QH overlay region
134 * might have reference to the just unlinked qtd. The
135 * qtd is updated in qh_completions(). Update the QH
138 if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) {
139 qh->hw->hw_qtd_next = qtd->hw_next;
145 qh_update (ehci, qh, qtd);
148 /*-------------------------------------------------------------------------*/
150 static void qh_link_async(struct ehci_hcd *ehci, struct ehci_qh *qh);
152 static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd,
153 struct usb_host_endpoint *ep)
155 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
156 struct ehci_qh *qh = ep->hcpriv;
159 spin_lock_irqsave(&ehci->lock, flags);
161 if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list)
162 && ehci->rh_state == EHCI_RH_RUNNING)
163 qh_link_async(ehci, qh);
164 spin_unlock_irqrestore(&ehci->lock, flags);
167 static void ehci_clear_tt_buffer(struct ehci_hcd *ehci, struct ehci_qh *qh,
168 struct urb *urb, u32 token)
171 /* If an async split transaction gets an error or is unlinked,
172 * the TT buffer may be left in an indeterminate state. We
173 * have to clear the TT buffer.
175 * Note: this routine is never called for Isochronous transfers.
177 if (urb->dev->tt && !usb_pipeint(urb->pipe) && !qh->clearing_tt) {
179 struct usb_device *tt = urb->dev->tt->hub;
181 "clear tt buffer port %d, a%d ep%d t%08x\n",
182 urb->dev->ttport, urb->dev->devnum,
183 usb_pipeendpoint(urb->pipe), token);
185 if (!ehci_is_TDI(ehci)
186 || urb->dev->tt->hub !=
187 ehci_to_hcd(ehci)->self.root_hub) {
188 if (usb_hub_clear_tt_buffer(urb) == 0)
192 /* REVISIT ARC-derived cores don't clear the root
193 * hub TT buffer in this way...
199 static int qtd_copy_status (
200 struct ehci_hcd *ehci,
206 int status = -EINPROGRESS;
208 /* count IN/OUT bytes, not SETUP (even short packets) */
209 if (likely (QTD_PID (token) != 2))
210 urb->actual_length += length - QTD_LENGTH (token);
212 /* don't modify error codes */
213 if (unlikely(urb->unlinked))
216 /* force cleanup after short read; not always an error */
217 if (unlikely (IS_SHORT_READ (token)))
220 /* serious "can't proceed" faults reported by the hardware */
221 if (token & QTD_STS_HALT) {
222 if (token & QTD_STS_BABBLE) {
223 /* FIXME "must" disable babbling device's port too */
225 /* CERR nonzero + halt --> stall */
226 } else if (QTD_CERR(token)) {
229 /* In theory, more than one of the following bits can be set
230 * since they are sticky and the transaction is retried.
231 * Which to test first is rather arbitrary.
233 } else if (token & QTD_STS_MMF) {
234 /* fs/ls interrupt xfer missed the complete-split */
236 } else if (token & QTD_STS_DBE) {
237 status = (QTD_PID (token) == 1) /* IN ? */
238 ? -ENOSR /* hc couldn't read data */
239 : -ECOMM; /* hc couldn't write data */
240 } else if (token & QTD_STS_XACT) {
241 /* timeout, bad CRC, wrong PID, etc */
242 ehci_dbg(ehci, "devpath %s ep%d%s 3strikes\n",
244 usb_pipeendpoint(urb->pipe),
245 usb_pipein(urb->pipe) ? "in" : "out");
247 } else { /* unknown */
252 "dev%d ep%d%s qtd token %08x --> status %d\n",
253 usb_pipedevice (urb->pipe),
254 usb_pipeendpoint (urb->pipe),
255 usb_pipein (urb->pipe) ? "in" : "out",
263 ehci_urb_done(struct ehci_hcd *ehci, struct urb *urb, int status)
264 __releases(ehci->lock)
265 __acquires(ehci->lock)
267 if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
268 /* ... update hc-wide periodic stats */
269 ehci_to_hcd(ehci)->self.bandwidth_int_reqs--;
272 if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS)
273 qh_put((struct ehci_qh *) urb->hcpriv);
275 if (unlikely(urb->unlinked)) {
276 COUNT(ehci->stats.unlink);
278 /* report non-error and short read status as zero */
279 if (status == -EINPROGRESS || status == -EREMOTEIO)
281 COUNT(ehci->stats.complete);
284 #ifdef EHCI_URB_TRACE
286 "%s %s urb %p ep%d%s status %d len %d/%d\n",
287 __func__, urb->dev->devpath, urb,
288 usb_pipeendpoint (urb->pipe),
289 usb_pipein (urb->pipe) ? "in" : "out",
291 urb->actual_length, urb->transfer_buffer_length);
294 /* complete() can reenter this HCD */
295 usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
296 spin_unlock (&ehci->lock);
297 usb_hcd_giveback_urb(ehci_to_hcd(ehci), urb, status);
298 spin_lock (&ehci->lock);
301 static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh);
302 static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh);
304 static int qh_schedule (struct ehci_hcd *ehci, struct ehci_qh *qh);
307 * Process and free completed qtds for a qh, returning URBs to drivers.
308 * Chases up to qh->hw_current. Returns number of completions called,
309 * indicating how much "real" work we did.
312 qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
314 struct ehci_qtd *last, *end = qh->dummy;
315 struct list_head *entry, *tmp;
320 struct ehci_qh_hw *hw = qh->hw;
322 if (unlikely (list_empty (&qh->qtd_list)))
325 /* completions (or tasks on other cpus) must never clobber HALT
326 * till we've gone through and cleaned everything up, even when
327 * they add urbs to this qh's queue or mark them for unlinking.
329 * NOTE: unlinking expects to be done in queue order.
331 * It's a bug for qh->qh_state to be anything other than
332 * QH_STATE_IDLE, unless our caller is scan_async() or
335 state = qh->qh_state;
336 qh->qh_state = QH_STATE_COMPLETING;
337 stopped = (state == QH_STATE_IDLE);
341 last_status = -EINPROGRESS;
342 qh->needs_rescan = 0;
344 /* remove de-activated QTDs from front of queue.
345 * after faults (including short reads), cleanup this urb
346 * then let the queue advance.
347 * if queue is stopped, handles unlinks.
349 list_for_each_safe (entry, tmp, &qh->qtd_list) {
350 struct ehci_qtd *qtd;
354 qtd = list_entry (entry, struct ehci_qtd, qtd_list);
357 /* clean up any state from previous QTD ...*/
359 if (likely (last->urb != urb)) {
360 ehci_urb_done(ehci, last->urb, last_status);
362 last_status = -EINPROGRESS;
364 ehci_qtd_free (ehci, last);
368 /* ignore urbs submitted during completions we reported */
372 /* hardware copies qtd out of qh overlay */
374 token = hc32_to_cpu(ehci, qtd->hw_token);
376 /* always clean up qtds the hc de-activated */
378 if ((token & QTD_STS_ACTIVE) == 0) {
380 /* on STALL, error, and short reads this urb must
381 * complete and all its qtds must be recycled.
383 if ((token & QTD_STS_HALT) != 0) {
385 /* retry transaction errors until we
386 * reach the software xacterr limit
388 if ((token & QTD_STS_XACT) &&
389 QTD_CERR(token) == 0 &&
390 ++qh->xacterrs < QH_XACTERR_MAX &&
393 "detected XactErr len %zu/%zu retry %d\n",
394 qtd->length - QTD_LENGTH(token), qtd->length, qh->xacterrs);
396 /* reset the token in the qtd and the
397 * qh overlay (which still contains
398 * the qtd) so that we pick up from
401 token &= ~QTD_STS_HALT;
402 token |= QTD_STS_ACTIVE |
403 (EHCI_TUNE_CERR << 10);
404 qtd->hw_token = cpu_to_hc32(ehci,
407 hw->hw_token = cpu_to_hc32(ehci,
413 /* magic dummy for some short reads; qh won't advance.
414 * that silicon quirk can kick in with this dummy too.
416 * other short reads won't stop the queue, including
417 * control transfers (status stage handles that) or
418 * most other single-qtd reads ... the queue stops if
419 * URB_SHORT_NOT_OK was set so the driver submitting
420 * the urbs could clean it up.
422 } else if (IS_SHORT_READ (token)
423 && !(qtd->hw_alt_next
424 & EHCI_LIST_END(ehci))) {
428 /* stop scanning when we reach qtds the hc is using */
429 } else if (likely (!stopped
430 && ehci->rh_state == EHCI_RH_RUNNING)) {
433 /* scan the whole queue for unlinks whenever it stops */
437 /* cancel everything if we halt, suspend, etc */
438 if (ehci->rh_state != EHCI_RH_RUNNING)
439 last_status = -ESHUTDOWN;
441 /* this qtd is active; skip it unless a previous qtd
442 * for its urb faulted, or its urb was canceled.
444 else if (last_status == -EINPROGRESS && !urb->unlinked)
447 /* qh unlinked; token in overlay may be most current */
448 if (state == QH_STATE_IDLE
449 && cpu_to_hc32(ehci, qtd->qtd_dma)
451 token = hc32_to_cpu(ehci, hw->hw_token);
453 /* An unlink may leave an incomplete
454 * async transaction in the TT buffer.
455 * We have to clear it.
457 ehci_clear_tt_buffer(ehci, qh, urb, token);
461 /* unless we already know the urb's status, collect qtd status
462 * and update count of bytes transferred. in common short read
463 * cases with only one data qtd (including control transfers),
464 * queue processing won't halt. but with two or more qtds (for
465 * example, with a 32 KB transfer), when the first qtd gets a
466 * short read the second must be removed by hand.
468 if (last_status == -EINPROGRESS) {
469 last_status = qtd_copy_status(ehci, urb,
471 if (last_status == -EREMOTEIO
473 & EHCI_LIST_END(ehci)))
474 last_status = -EINPROGRESS;
476 /* As part of low/full-speed endpoint-halt processing
477 * we must clear the TT buffer (11.17.5).
479 if (unlikely(last_status != -EINPROGRESS &&
480 last_status != -EREMOTEIO)) {
481 /* The TT's in some hubs malfunction when they
482 * receive this request following a STALL (they
483 * stop sending isochronous packets). Since a
484 * STALL can't leave the TT buffer in a busy
485 * state (if you believe Figures 11-48 - 11-51
486 * in the USB 2.0 spec), we won't clear the TT
487 * buffer in this case. Strictly speaking this
488 * is a violation of the spec.
490 if (last_status != -EPIPE)
491 ehci_clear_tt_buffer(ehci, qh, urb,
496 /* if we're removing something not at the queue head,
497 * patch the hardware queue pointer.
499 if (stopped && qtd->qtd_list.prev != &qh->qtd_list) {
500 last = list_entry (qtd->qtd_list.prev,
501 struct ehci_qtd, qtd_list);
502 last->hw_next = qtd->hw_next;
505 /* remove qtd; it's recycled after possible urb completion */
506 list_del (&qtd->qtd_list);
509 /* reinit the xacterr counter for the next qtd */
513 /* last urb's completion might still need calling */
514 if (likely (last != NULL)) {
515 ehci_urb_done(ehci, last->urb, last_status);
517 ehci_qtd_free (ehci, last);
520 /* Do we need to rescan for URBs dequeued during a giveback? */
521 if (unlikely(qh->needs_rescan)) {
522 /* If the QH is already unlinked, do the rescan now. */
523 if (state == QH_STATE_IDLE)
526 /* Otherwise we have to wait until the QH is fully unlinked.
527 * Our caller will start an unlink if qh->needs_rescan is
528 * set. But if an unlink has already started, nothing needs
531 if (state != QH_STATE_LINKED)
532 qh->needs_rescan = 0;
535 /* restore original state; caller must unlink or relink */
536 qh->qh_state = state;
538 /* be sure the hardware's done with the qh before refreshing
539 * it after fault cleanup, or recovering from silicon wrongly
540 * overlaying the dummy qtd (which reduces DMA chatter).
542 if (stopped != 0 || hw->hw_qtd_next == EHCI_LIST_END(ehci)) {
545 qh_refresh(ehci, qh);
547 case QH_STATE_LINKED:
548 /* We won't refresh a QH that's linked (after the HC
549 * stopped the queue). That avoids a race:
550 * - HC reads first part of QH;
551 * - CPU updates that first part and the token;
552 * - HC reads rest of that QH, including token
553 * Result: HC gets an inconsistent image, and then
554 * DMAs to/from the wrong memory (corrupting it).
556 * That should be rare for interrupt transfers,
557 * except maybe high bandwidth ...
560 /* Tell the caller to start an unlink */
561 qh->needs_rescan = 1;
563 /* otherwise, unlink already started */
570 /*-------------------------------------------------------------------------*/
572 // high bandwidth multiplier, as encoded in highspeed endpoint descriptors
573 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
574 // ... and packet size, for any kind of endpoint descriptor
575 #define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
578 * reverse of qh_urb_transaction: free a list of TDs.
579 * used for cleanup after errors, before HC sees an URB's TDs.
581 static void qtd_list_free (
582 struct ehci_hcd *ehci,
584 struct list_head *qtd_list
586 struct list_head *entry, *temp;
588 list_for_each_safe (entry, temp, qtd_list) {
589 struct ehci_qtd *qtd;
591 qtd = list_entry (entry, struct ehci_qtd, qtd_list);
592 list_del (&qtd->qtd_list);
593 ehci_qtd_free (ehci, qtd);
598 * create a list of filled qtds for this URB; won't link into qh.
600 static struct list_head *
602 struct ehci_hcd *ehci,
604 struct list_head *head,
607 struct ehci_qtd *qtd, *qtd_prev;
609 int len, this_sg_len, maxpacket;
613 struct scatterlist *sg;
616 * URBs map to sequences of QTDs: one logical transaction
618 qtd = ehci_qtd_alloc (ehci, flags);
621 list_add_tail (&qtd->qtd_list, head);
624 token = QTD_STS_ACTIVE;
625 token |= (EHCI_TUNE_CERR << 10);
626 /* for split transactions, SplitXState initialized to zero */
628 len = urb->transfer_buffer_length;
629 is_input = usb_pipein (urb->pipe);
630 if (usb_pipecontrol (urb->pipe)) {
632 qtd_fill(ehci, qtd, urb->setup_dma,
633 sizeof (struct usb_ctrlrequest),
634 token | (2 /* "setup" */ << 8), 8);
636 /* ... and always at least one more pid */
639 qtd = ehci_qtd_alloc (ehci, flags);
643 qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma);
644 list_add_tail (&qtd->qtd_list, head);
646 /* for zero length DATA stages, STATUS is always IN */
648 token |= (1 /* "in" */ << 8);
652 * data transfer stage: buffer setup
654 i = urb->num_mapped_sgs;
655 if (len > 0 && i > 0) {
657 buf = sg_dma_address(sg);
659 /* urb->transfer_buffer_length may be smaller than the
660 * size of the scatterlist (or vice versa)
662 this_sg_len = min_t(int, sg_dma_len(sg), len);
665 buf = urb->transfer_dma;
670 token |= (1 /* "in" */ << 8);
671 /* else it's already initted to "out" pid (0 << 8) */
673 maxpacket = max_packet(usb_maxpacket(urb->dev, urb->pipe, !is_input));
676 * buffer gets wrapped in one or more qtds;
677 * last one may be "short" (including zero len)
678 * and may serve as a control status ack
683 this_qtd_len = qtd_fill(ehci, qtd, buf, this_sg_len, token,
685 this_sg_len -= this_qtd_len;
690 * short reads advance to a "magic" dummy instead of the next
691 * qtd ... that forces the queue to stop, for manual cleanup.
692 * (this will usually be overridden later.)
695 qtd->hw_alt_next = ehci->async->hw->hw_alt_next;
697 /* qh makes control packets use qtd toggle; maybe switch it */
698 if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0)
701 if (likely(this_sg_len <= 0)) {
702 if (--i <= 0 || len <= 0)
705 buf = sg_dma_address(sg);
706 this_sg_len = min_t(int, sg_dma_len(sg), len);
710 qtd = ehci_qtd_alloc (ehci, flags);
714 qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma);
715 list_add_tail (&qtd->qtd_list, head);
719 * unless the caller requires manual cleanup after short reads,
720 * have the alt_next mechanism keep the queue running after the
721 * last data qtd (the only one, for control and most other cases).
723 if (likely ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0
724 || usb_pipecontrol (urb->pipe)))
725 qtd->hw_alt_next = EHCI_LIST_END(ehci);
728 * control requests may need a terminating data "status" ack;
729 * other OUT ones may need a terminating short packet
732 if (likely (urb->transfer_buffer_length != 0)) {
735 if (usb_pipecontrol (urb->pipe)) {
737 token ^= 0x0100; /* "in" <--> "out" */
738 token |= QTD_TOGGLE; /* force DATA1 */
739 } else if (usb_pipeout(urb->pipe)
740 && (urb->transfer_flags & URB_ZERO_PACKET)
741 && !(urb->transfer_buffer_length % maxpacket)) {
746 qtd = ehci_qtd_alloc (ehci, flags);
750 qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma);
751 list_add_tail (&qtd->qtd_list, head);
753 /* never any data in such packets */
754 qtd_fill(ehci, qtd, 0, 0, token, 0);
758 /* by default, enable interrupt on urb completion */
759 if (likely (!(urb->transfer_flags & URB_NO_INTERRUPT)))
760 qtd->hw_token |= cpu_to_hc32(ehci, QTD_IOC);
764 qtd_list_free (ehci, urb, head);
768 /*-------------------------------------------------------------------------*/
770 // Would be best to create all qh's from config descriptors,
771 // when each interface/altsetting is established. Unlink
772 // any previous qh and cancel its urbs first; endpoints are
773 // implicitly reset then (data toggle too).
774 // That'd mean updating how usbcore talks to HCDs. (2.7?)
778 * Each QH holds a qtd list; a QH is used for everything except iso.
780 * For interrupt urbs, the scheduler must set the microframe scheduling
781 * mask(s) each time the QH gets scheduled. For highspeed, that's
782 * just one microframe in the s-mask. For split interrupt transactions
783 * there are additional complications: c-mask, maybe FSTNs.
785 static struct ehci_qh *
787 struct ehci_hcd *ehci,
791 struct ehci_qh *qh = ehci_qh_alloc (ehci, flags);
792 u32 info1 = 0, info2 = 0;
795 struct usb_tt *tt = urb->dev->tt;
796 struct ehci_qh_hw *hw;
802 * init endpoint/device data for this QH
804 info1 |= usb_pipeendpoint (urb->pipe) << 8;
805 info1 |= usb_pipedevice (urb->pipe) << 0;
807 is_input = usb_pipein (urb->pipe);
808 type = usb_pipetype (urb->pipe);
809 maxp = usb_maxpacket (urb->dev, urb->pipe, !is_input);
811 /* 1024 byte maxpacket is a hardware ceiling. High bandwidth
812 * acts like up to 3KB, but is built from smaller packets.
814 if (max_packet(maxp) > 1024) {
815 ehci_dbg(ehci, "bogus qh maxpacket %d\n", max_packet(maxp));
819 /* Compute interrupt scheduling parameters just once, and save.
820 * - allowing for high bandwidth, how many nsec/uframe are used?
821 * - split transactions need a second CSPLIT uframe; same question
822 * - splits also need a schedule gap (for full/low speed I/O)
823 * - qh has a polling interval
825 * For control/bulk requests, the HC or TT handles these.
827 if (type == PIPE_INTERRUPT) {
828 qh->usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH,
830 hb_mult(maxp) * max_packet(maxp)));
831 qh->start = NO_FRAME;
832 qh->stamp = ehci->periodic_stamp;
834 if (urb->dev->speed == USB_SPEED_HIGH) {
838 qh->period = urb->interval >> 3;
839 if (qh->period == 0 && urb->interval != 1) {
840 /* NOTE interval 2 or 4 uframes could work.
841 * But interval 1 scheduling is simpler, and
842 * includes high bandwidth.
845 } else if (qh->period > ehci->periodic_size) {
846 qh->period = ehci->periodic_size;
847 urb->interval = qh->period << 3;
852 /* gap is f(FS/LS transfer times) */
853 qh->gap_uf = 1 + usb_calc_bus_time (urb->dev->speed,
854 is_input, 0, maxp) / (125 * 1000);
856 /* FIXME this just approximates SPLIT/CSPLIT times */
857 if (is_input) { // SPLIT, gap, CSPLIT+DATA
858 qh->c_usecs = qh->usecs + HS_USECS (0);
859 qh->usecs = HS_USECS (1);
860 } else { // SPLIT+DATA, gap, CSPLIT
861 qh->usecs += HS_USECS (1);
862 qh->c_usecs = HS_USECS (0);
865 think_time = tt ? tt->think_time : 0;
866 qh->tt_usecs = NS_TO_US (think_time +
867 usb_calc_bus_time (urb->dev->speed,
868 is_input, 0, max_packet (maxp)));
869 qh->period = urb->interval;
870 if (qh->period > ehci->periodic_size) {
871 qh->period = ehci->periodic_size;
872 urb->interval = qh->period;
877 /* support for tt scheduling, and access to toggles */
881 switch (urb->dev->speed) {
883 info1 |= (1 << 12); /* EPS "low" */
887 /* EPS 0 means "full" */
888 if (type != PIPE_INTERRUPT)
889 info1 |= (EHCI_TUNE_RL_TT << 28);
890 if (type == PIPE_CONTROL) {
891 info1 |= (1 << 27); /* for TT */
892 info1 |= 1 << 14; /* toggle from qtd */
896 info2 |= (EHCI_TUNE_MULT_TT << 30);
898 /* Some Freescale processors have an erratum in which the
899 * port number in the queue head was 0..N-1 instead of 1..N.
901 if (ehci_has_fsl_portno_bug(ehci))
902 info2 |= (urb->dev->ttport-1) << 23;
904 info2 |= urb->dev->ttport << 23;
906 /* set the address of the TT; for TDI's integrated
907 * root hub tt, leave it zeroed.
909 if (tt && tt->hub != ehci_to_hcd(ehci)->self.root_hub)
910 info2 |= tt->hub->devnum << 16;
912 /* NOTE: if (PIPE_INTERRUPT) { scheduler sets c-mask } */
916 case USB_SPEED_HIGH: /* no TT involved */
917 info1 |= (2 << 12); /* EPS "high" */
918 if (type == PIPE_CONTROL) {
919 info1 |= (EHCI_TUNE_RL_HS << 28);
920 info1 |= 64 << 16; /* usb2 fixed maxpacket */
921 info1 |= 1 << 14; /* toggle from qtd */
922 info2 |= (EHCI_TUNE_MULT_HS << 30);
923 } else if (type == PIPE_BULK) {
924 info1 |= (EHCI_TUNE_RL_HS << 28);
925 /* The USB spec says that high speed bulk endpoints
926 * always use 512 byte maxpacket. But some device
927 * vendors decided to ignore that, and MSFT is happy
928 * to help them do so. So now people expect to use
929 * such nonconformant devices with Linux too; sigh.
931 info1 |= max_packet(maxp) << 16;
932 info2 |= (EHCI_TUNE_MULT_HS << 30);
933 } else { /* PIPE_INTERRUPT */
934 info1 |= max_packet (maxp) << 16;
935 info2 |= hb_mult (maxp) << 30;
939 dbg ("bogus dev %p speed %d", urb->dev, urb->dev->speed);
945 /* NOTE: if (PIPE_INTERRUPT) { scheduler sets s-mask } */
947 /* init as live, toggle clear, advance to dummy */
948 qh->qh_state = QH_STATE_IDLE;
950 hw->hw_info1 = cpu_to_hc32(ehci, info1);
951 hw->hw_info2 = cpu_to_hc32(ehci, info2);
952 qh->is_out = !is_input;
953 usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
954 qh_refresh (ehci, qh);
958 /*-------------------------------------------------------------------------*/
960 /* move qh (and its qtds) onto async queue; maybe enable queue. */
962 static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
964 __hc32 dma = QH_NEXT(ehci, qh->qh_dma);
965 struct ehci_qh *head;
967 /* Don't link a QH if there's a Clear-TT-Buffer pending */
968 if (unlikely(qh->clearing_tt))
971 WARN_ON(qh->qh_state != QH_STATE_IDLE);
973 /* (re)start the async schedule? */
975 timer_action_done (ehci, TIMER_ASYNC_OFF);
976 if (!head->qh_next.qh) {
977 u32 cmd = ehci_readl(ehci, &ehci->regs->command);
979 if (!(cmd & CMD_ASE)) {
980 /* in case a clear of CMD_ASE didn't take yet */
981 (void)handshake(ehci, &ehci->regs->status,
984 ehci_writel(ehci, cmd, &ehci->regs->command);
985 /* posted write need not be known to HC yet ... */
989 /* clear halt and/or toggle; and maybe recover from silicon quirk */
990 qh_refresh(ehci, qh);
992 /* splice right after start */
993 qh->qh_next = head->qh_next;
994 qh->hw->hw_next = head->hw->hw_next;
997 head->qh_next.qh = qh;
998 head->hw->hw_next = dma;
1002 qh->qh_state = QH_STATE_LINKED;
1003 /* qtd completions reported later by interrupt */
1006 /*-------------------------------------------------------------------------*/
1009 * For control/bulk/interrupt, return QH with these TDs appended.
1010 * Allocates and initializes the QH if necessary.
1011 * Returns null if it can't allocate a QH it needs to.
1012 * If the QH has TDs (urbs) already, that's great.
1014 static struct ehci_qh *qh_append_tds (
1015 struct ehci_hcd *ehci,
1017 struct list_head *qtd_list,
1022 struct ehci_qh *qh = NULL;
1023 __hc32 qh_addr_mask = cpu_to_hc32(ehci, 0x7f);
1025 qh = (struct ehci_qh *) *ptr;
1026 if (unlikely (qh == NULL)) {
1027 /* can't sleep here, we have ehci->lock... */
1028 qh = qh_make (ehci, urb, GFP_ATOMIC);
1031 if (likely (qh != NULL)) {
1032 struct ehci_qtd *qtd;
1034 if (unlikely (list_empty (qtd_list)))
1037 qtd = list_entry (qtd_list->next, struct ehci_qtd,
1040 /* control qh may need patching ... */
1041 if (unlikely (epnum == 0)) {
1043 /* usb_reset_device() briefly reverts to address 0 */
1044 if (usb_pipedevice (urb->pipe) == 0)
1045 qh->hw->hw_info1 &= ~qh_addr_mask;
1048 /* just one way to queue requests: swap with the dummy qtd.
1049 * only hc or qh_refresh() ever modify the overlay.
1051 if (likely (qtd != NULL)) {
1052 struct ehci_qtd *dummy;
1056 /* to avoid racing the HC, use the dummy td instead of
1057 * the first td of our list (becomes new dummy). both
1058 * tds stay deactivated until we're done, when the
1059 * HC is allowed to fetch the old dummy (4.10.2).
1061 token = qtd->hw_token;
1062 qtd->hw_token = HALT_BIT(ehci);
1066 dma = dummy->qtd_dma;
1068 dummy->qtd_dma = dma;
1070 list_del (&qtd->qtd_list);
1071 list_add (&dummy->qtd_list, qtd_list);
1072 list_splice_tail(qtd_list, &qh->qtd_list);
1074 ehci_qtd_init(ehci, qtd, qtd->qtd_dma);
1077 /* hc must see the new dummy at list end */
1079 qtd = list_entry (qh->qtd_list.prev,
1080 struct ehci_qtd, qtd_list);
1081 qtd->hw_next = QTD_NEXT(ehci, dma);
1083 /* let the hc process these next qtds */
1085 dummy->hw_token = token;
1087 urb->hcpriv = qh_get (qh);
1093 /*-------------------------------------------------------------------------*/
1097 struct ehci_hcd *ehci,
1099 struct list_head *qtd_list,
1103 unsigned long flags;
1104 struct ehci_qh *qh = NULL;
1107 epnum = urb->ep->desc.bEndpointAddress;
1109 #ifdef EHCI_URB_TRACE
1111 struct ehci_qtd *qtd;
1112 qtd = list_entry(qtd_list->next, struct ehci_qtd, qtd_list);
1114 "%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n",
1115 __func__, urb->dev->devpath, urb,
1116 epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out",
1117 urb->transfer_buffer_length,
1118 qtd, urb->ep->hcpriv);
1122 spin_lock_irqsave (&ehci->lock, flags);
1123 if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) {
1127 rc = usb_hcd_link_urb_to_ep(ehci_to_hcd(ehci), urb);
1131 qh = qh_append_tds(ehci, urb, qtd_list, epnum, &urb->ep->hcpriv);
1132 if (unlikely(qh == NULL)) {
1133 usb_hcd_unlink_urb_from_ep(ehci_to_hcd(ehci), urb);
1138 /* Control/bulk operations through TTs don't need scheduling,
1139 * the HC and TT handle it when the TT has a buffer ready.
1141 if (likely (qh->qh_state == QH_STATE_IDLE))
1142 qh_link_async(ehci, qh);
1144 spin_unlock_irqrestore (&ehci->lock, flags);
1145 if (unlikely (qh == NULL))
1146 qtd_list_free (ehci, urb, qtd_list);
1150 /*-------------------------------------------------------------------------*/
1152 /* the async qh for the qtds being reclaimed are now unlinked from the HC */
1154 static void end_unlink_async (struct ehci_hcd *ehci)
1156 struct ehci_qh *qh = ehci->reclaim;
1157 struct ehci_qh *next;
1159 iaa_watchdog_done(ehci);
1161 // qh->hw_next = cpu_to_hc32(qh->qh_dma);
1162 qh->qh_state = QH_STATE_IDLE;
1163 qh->qh_next.qh = NULL;
1164 qh_put (qh); // refcount from reclaim
1166 /* other unlink(s) may be pending (in QH_STATE_UNLINK_WAIT) */
1168 ehci->reclaim = next;
1171 qh_completions (ehci, qh);
1173 if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) {
1174 qh_link_async (ehci, qh);
1176 /* it's not free to turn the async schedule on/off; leave it
1177 * active but idle for a while once it empties.
1179 if (ehci->rh_state == EHCI_RH_RUNNING
1180 && ehci->async->qh_next.qh == NULL)
1181 timer_action (ehci, TIMER_ASYNC_OFF);
1183 qh_put(qh); /* refcount from async list */
1186 ehci->reclaim = NULL;
1187 start_unlink_async (ehci, next);
1190 if (ehci->has_synopsys_hc_bug)
1191 ehci_writel(ehci, (u32) ehci->async->qh_dma,
1192 &ehci->regs->async_next);
1195 /* makes sure the async qh will become idle */
1196 /* caller must own ehci->lock */
1198 static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
1200 int cmd = ehci_readl(ehci, &ehci->regs->command);
1201 struct ehci_qh *prev;
1204 assert_spin_locked(&ehci->lock);
1206 || (qh->qh_state != QH_STATE_LINKED
1207 && qh->qh_state != QH_STATE_UNLINK_WAIT)
1212 /* stop async schedule right now? */
1213 if (unlikely (qh == ehci->async)) {
1214 /* can't get here without STS_ASS set */
1215 if (ehci->rh_state != EHCI_RH_HALTED
1216 && !ehci->reclaim) {
1217 /* ... and CMD_IAAD clear */
1218 ehci_writel(ehci, cmd & ~CMD_ASE,
1219 &ehci->regs->command);
1221 // handshake later, if we need to
1222 timer_action_done (ehci, TIMER_ASYNC_OFF);
1227 qh->qh_state = QH_STATE_UNLINK;
1228 ehci->reclaim = qh = qh_get (qh);
1231 while (prev->qh_next.qh != qh)
1232 prev = prev->qh_next.qh;
1234 prev->hw->hw_next = qh->hw->hw_next;
1235 prev->qh_next = qh->qh_next;
1236 if (ehci->qh_scan_next == qh)
1237 ehci->qh_scan_next = qh->qh_next.qh;
1240 /* If the controller isn't running, we don't have to wait for it */
1241 if (unlikely(ehci->rh_state != EHCI_RH_RUNNING)) {
1242 /* if (unlikely (qh->reclaim != 0))
1243 * this will recurse, probably not much
1245 end_unlink_async (ehci);
1250 ehci_writel(ehci, cmd, &ehci->regs->command);
1251 (void)ehci_readl(ehci, &ehci->regs->command);
1252 iaa_watchdog_start(ehci);
1255 /*-------------------------------------------------------------------------*/
1257 static void scan_async (struct ehci_hcd *ehci)
1261 enum ehci_timer_action action = TIMER_IO_WATCHDOG;
1263 timer_action_done (ehci, TIMER_ASYNC_SHRINK);
1264 stopped = (ehci->rh_state != EHCI_RH_RUNNING);
1266 ehci->qh_scan_next = ehci->async->qh_next.qh;
1267 while (ehci->qh_scan_next) {
1268 qh = ehci->qh_scan_next;
1269 ehci->qh_scan_next = qh->qh_next.qh;
1271 /* clean any finished work for this qh */
1272 if (!list_empty(&qh->qtd_list)) {
1276 * Unlinks could happen here; completion reporting
1277 * drops the lock. That's why ehci->qh_scan_next
1278 * always holds the next qh to scan; if the next qh
1279 * gets unlinked then ehci->qh_scan_next is adjusted
1280 * in start_unlink_async().
1283 temp = qh_completions(ehci, qh);
1284 if (qh->needs_rescan)
1285 unlink_async(ehci, qh);
1286 qh->unlink_time = jiffies + EHCI_SHRINK_JIFFIES;
1292 /* unlink idle entries, reducing DMA usage as well
1293 * as HCD schedule-scanning costs. delay for any qh
1294 * we just scanned, there's a not-unusual case that it
1295 * doesn't stay idle for long.
1296 * (plus, avoids some kind of re-activation race.)
1298 if (list_empty(&qh->qtd_list)
1299 && qh->qh_state == QH_STATE_LINKED) {
1300 if (!ehci->reclaim && (stopped ||
1301 time_after_eq(jiffies, qh->unlink_time)))
1302 start_unlink_async(ehci, qh);
1304 action = TIMER_ASYNC_SHRINK;
1307 if (action == TIMER_ASYNC_SHRINK)
1308 timer_action (ehci, TIMER_ASYNC_SHRINK);