Remove deadlock potential in md_open
[pandora-kernel.git] / drivers / thermal / thermal_sys.c
1 /*
2  *  thermal.c - Generic Thermal Management Sysfs support.
3  *
4  *  Copyright (C) 2008 Intel Corp
5  *  Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
6  *  Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
7  *
8  *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
9  *
10  *  This program is free software; you can redistribute it and/or modify
11  *  it under the terms of the GNU General Public License as published by
12  *  the Free Software Foundation; version 2 of the License.
13  *
14  *  This program is distributed in the hope that it will be useful, but
15  *  WITHOUT ANY WARRANTY; without even the implied warranty of
16  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17  *  General Public License for more details.
18  *
19  *  You should have received a copy of the GNU General Public License along
20  *  with this program; if not, write to the Free Software Foundation, Inc.,
21  *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
22  *
23  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
24  */
25
26 #include <linux/module.h>
27 #include <linux/device.h>
28 #include <linux/err.h>
29 #include <linux/kdev_t.h>
30 #include <linux/idr.h>
31 #include <linux/thermal.h>
32 #include <linux/spinlock.h>
33 #include <linux/reboot.h>
34
35 MODULE_AUTHOR("Zhang Rui");
36 MODULE_DESCRIPTION("Generic thermal management sysfs support");
37 MODULE_LICENSE("GPL");
38
39 #define PREFIX "Thermal: "
40
41 struct thermal_cooling_device_instance {
42         int id;
43         char name[THERMAL_NAME_LENGTH];
44         struct thermal_zone_device *tz;
45         struct thermal_cooling_device *cdev;
46         int trip;
47         char attr_name[THERMAL_NAME_LENGTH];
48         struct device_attribute attr;
49         struct list_head node;
50 };
51
52 static DEFINE_IDR(thermal_tz_idr);
53 static DEFINE_IDR(thermal_cdev_idr);
54 static DEFINE_MUTEX(thermal_idr_lock);
55
56 static LIST_HEAD(thermal_tz_list);
57 static LIST_HEAD(thermal_cdev_list);
58 static DEFINE_MUTEX(thermal_list_lock);
59
60 static int get_idr(struct idr *idr, struct mutex *lock, int *id)
61 {
62         int err;
63
64       again:
65         if (unlikely(idr_pre_get(idr, GFP_KERNEL) == 0))
66                 return -ENOMEM;
67
68         if (lock)
69                 mutex_lock(lock);
70         err = idr_get_new(idr, NULL, id);
71         if (lock)
72                 mutex_unlock(lock);
73         if (unlikely(err == -EAGAIN))
74                 goto again;
75         else if (unlikely(err))
76                 return err;
77
78         *id = *id & MAX_ID_MASK;
79         return 0;
80 }
81
82 static void release_idr(struct idr *idr, struct mutex *lock, int id)
83 {
84         if (lock)
85                 mutex_lock(lock);
86         idr_remove(idr, id);
87         if (lock)
88                 mutex_unlock(lock);
89 }
90
91 /* sys I/F for thermal zone */
92
93 #define to_thermal_zone(_dev) \
94         container_of(_dev, struct thermal_zone_device, device)
95
96 static ssize_t
97 type_show(struct device *dev, struct device_attribute *attr, char *buf)
98 {
99         struct thermal_zone_device *tz = to_thermal_zone(dev);
100
101         return sprintf(buf, "%s\n", tz->type);
102 }
103
104 static ssize_t
105 temp_show(struct device *dev, struct device_attribute *attr, char *buf)
106 {
107         struct thermal_zone_device *tz = to_thermal_zone(dev);
108         long temperature;
109         int ret;
110
111         if (!tz->ops->get_temp)
112                 return -EPERM;
113
114         ret = tz->ops->get_temp(tz, &temperature);
115
116         if (ret)
117                 return ret;
118
119         return sprintf(buf, "%ld\n", temperature);
120 }
121
122 static ssize_t
123 mode_show(struct device *dev, struct device_attribute *attr, char *buf)
124 {
125         struct thermal_zone_device *tz = to_thermal_zone(dev);
126         enum thermal_device_mode mode;
127         int result;
128
129         if (!tz->ops->get_mode)
130                 return -EPERM;
131
132         result = tz->ops->get_mode(tz, &mode);
133         if (result)
134                 return result;
135
136         return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled"
137                        : "disabled");
138 }
139
140 static ssize_t
141 mode_store(struct device *dev, struct device_attribute *attr,
142            const char *buf, size_t count)
143 {
144         struct thermal_zone_device *tz = to_thermal_zone(dev);
145         int result;
146
147         if (!tz->ops->set_mode)
148                 return -EPERM;
149
150         if (!strncmp(buf, "enabled", sizeof("enabled")))
151                 result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED);
152         else if (!strncmp(buf, "disabled", sizeof("disabled")))
153                 result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED);
154         else
155                 result = -EINVAL;
156
157         if (result)
158                 return result;
159
160         return count;
161 }
162
163 static ssize_t
164 trip_point_type_show(struct device *dev, struct device_attribute *attr,
165                      char *buf)
166 {
167         struct thermal_zone_device *tz = to_thermal_zone(dev);
168         enum thermal_trip_type type;
169         int trip, result;
170
171         if (!tz->ops->get_trip_type)
172                 return -EPERM;
173
174         if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip))
175                 return -EINVAL;
176
177         result = tz->ops->get_trip_type(tz, trip, &type);
178         if (result)
179                 return result;
180
181         switch (type) {
182         case THERMAL_TRIP_CRITICAL:
183                 return sprintf(buf, "critical");
184         case THERMAL_TRIP_HOT:
185                 return sprintf(buf, "hot");
186         case THERMAL_TRIP_PASSIVE:
187                 return sprintf(buf, "passive");
188         case THERMAL_TRIP_ACTIVE:
189                 return sprintf(buf, "active");
190         default:
191                 return sprintf(buf, "unknown");
192         }
193 }
194
195 static ssize_t
196 trip_point_temp_show(struct device *dev, struct device_attribute *attr,
197                      char *buf)
198 {
199         struct thermal_zone_device *tz = to_thermal_zone(dev);
200         int trip, ret;
201         long temperature;
202
203         if (!tz->ops->get_trip_temp)
204                 return -EPERM;
205
206         if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))
207                 return -EINVAL;
208
209         ret = tz->ops->get_trip_temp(tz, trip, &temperature);
210
211         if (ret)
212                 return ret;
213
214         return sprintf(buf, "%ld\n", temperature);
215 }
216
217 static ssize_t
218 passive_store(struct device *dev, struct device_attribute *attr,
219                     const char *buf, size_t count)
220 {
221         struct thermal_zone_device *tz = to_thermal_zone(dev);
222         struct thermal_cooling_device *cdev = NULL;
223         int state;
224
225         if (!sscanf(buf, "%d\n", &state))
226                 return -EINVAL;
227
228         if (state && !tz->forced_passive) {
229                 mutex_lock(&thermal_list_lock);
230                 list_for_each_entry(cdev, &thermal_cdev_list, node) {
231                         if (!strncmp("Processor", cdev->type,
232                                      sizeof("Processor")))
233                                 thermal_zone_bind_cooling_device(tz,
234                                                                  THERMAL_TRIPS_NONE,
235                                                                  cdev);
236                 }
237                 mutex_unlock(&thermal_list_lock);
238         } else if (!state && tz->forced_passive) {
239                 mutex_lock(&thermal_list_lock);
240                 list_for_each_entry(cdev, &thermal_cdev_list, node) {
241                         if (!strncmp("Processor", cdev->type,
242                                      sizeof("Processor")))
243                                 thermal_zone_unbind_cooling_device(tz,
244                                                                    THERMAL_TRIPS_NONE,
245                                                                    cdev);
246                 }
247                 mutex_unlock(&thermal_list_lock);
248         }
249
250         tz->tc1 = 1;
251         tz->tc2 = 1;
252
253         if (!tz->passive_delay)
254                 tz->passive_delay = 1000;
255
256         if (!tz->polling_delay)
257                 tz->polling_delay = 10000;
258
259         tz->forced_passive = state;
260
261         thermal_zone_device_update(tz);
262
263         return count;
264 }
265
266 static ssize_t
267 passive_show(struct device *dev, struct device_attribute *attr,
268                    char *buf)
269 {
270         struct thermal_zone_device *tz = to_thermal_zone(dev);
271
272         return sprintf(buf, "%d\n", tz->forced_passive);
273 }
274
275 static DEVICE_ATTR(type, 0444, type_show, NULL);
276 static DEVICE_ATTR(temp, 0444, temp_show, NULL);
277 static DEVICE_ATTR(mode, 0644, mode_show, mode_store);
278 static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, \
279                    passive_store);
280
281 static struct device_attribute trip_point_attrs[] = {
282         __ATTR(trip_point_0_type, 0444, trip_point_type_show, NULL),
283         __ATTR(trip_point_0_temp, 0444, trip_point_temp_show, NULL),
284         __ATTR(trip_point_1_type, 0444, trip_point_type_show, NULL),
285         __ATTR(trip_point_1_temp, 0444, trip_point_temp_show, NULL),
286         __ATTR(trip_point_2_type, 0444, trip_point_type_show, NULL),
287         __ATTR(trip_point_2_temp, 0444, trip_point_temp_show, NULL),
288         __ATTR(trip_point_3_type, 0444, trip_point_type_show, NULL),
289         __ATTR(trip_point_3_temp, 0444, trip_point_temp_show, NULL),
290         __ATTR(trip_point_4_type, 0444, trip_point_type_show, NULL),
291         __ATTR(trip_point_4_temp, 0444, trip_point_temp_show, NULL),
292         __ATTR(trip_point_5_type, 0444, trip_point_type_show, NULL),
293         __ATTR(trip_point_5_temp, 0444, trip_point_temp_show, NULL),
294         __ATTR(trip_point_6_type, 0444, trip_point_type_show, NULL),
295         __ATTR(trip_point_6_temp, 0444, trip_point_temp_show, NULL),
296         __ATTR(trip_point_7_type, 0444, trip_point_type_show, NULL),
297         __ATTR(trip_point_7_temp, 0444, trip_point_temp_show, NULL),
298         __ATTR(trip_point_8_type, 0444, trip_point_type_show, NULL),
299         __ATTR(trip_point_8_temp, 0444, trip_point_temp_show, NULL),
300         __ATTR(trip_point_9_type, 0444, trip_point_type_show, NULL),
301         __ATTR(trip_point_9_temp, 0444, trip_point_temp_show, NULL),
302         __ATTR(trip_point_10_type, 0444, trip_point_type_show, NULL),
303         __ATTR(trip_point_10_temp, 0444, trip_point_temp_show, NULL),
304         __ATTR(trip_point_11_type, 0444, trip_point_type_show, NULL),
305         __ATTR(trip_point_11_temp, 0444, trip_point_temp_show, NULL),
306 };
307
308 #define TRIP_POINT_ATTR_ADD(_dev, _index, result)     \
309 do {    \
310         result = device_create_file(_dev,       \
311                                 &trip_point_attrs[_index * 2]); \
312         if (result)     \
313                 break;  \
314         result = device_create_file(_dev,       \
315                         &trip_point_attrs[_index * 2 + 1]);     \
316 } while (0)
317
318 #define TRIP_POINT_ATTR_REMOVE(_dev, _index)    \
319 do {    \
320         device_remove_file(_dev, &trip_point_attrs[_index * 2]);        \
321         device_remove_file(_dev, &trip_point_attrs[_index * 2 + 1]);    \
322 } while (0)
323
324 /* sys I/F for cooling device */
325 #define to_cooling_device(_dev) \
326         container_of(_dev, struct thermal_cooling_device, device)
327
328 static ssize_t
329 thermal_cooling_device_type_show(struct device *dev,
330                                  struct device_attribute *attr, char *buf)
331 {
332         struct thermal_cooling_device *cdev = to_cooling_device(dev);
333
334         return sprintf(buf, "%s\n", cdev->type);
335 }
336
337 static ssize_t
338 thermal_cooling_device_max_state_show(struct device *dev,
339                                       struct device_attribute *attr, char *buf)
340 {
341         struct thermal_cooling_device *cdev = to_cooling_device(dev);
342         unsigned long state;
343         int ret;
344
345         ret = cdev->ops->get_max_state(cdev, &state);
346         if (ret)
347                 return ret;
348         return sprintf(buf, "%ld\n", state);
349 }
350
351 static ssize_t
352 thermal_cooling_device_cur_state_show(struct device *dev,
353                                       struct device_attribute *attr, char *buf)
354 {
355         struct thermal_cooling_device *cdev = to_cooling_device(dev);
356         unsigned long state;
357         int ret;
358
359         ret = cdev->ops->get_cur_state(cdev, &state);
360         if (ret)
361                 return ret;
362         return sprintf(buf, "%ld\n", state);
363 }
364
365 static ssize_t
366 thermal_cooling_device_cur_state_store(struct device *dev,
367                                        struct device_attribute *attr,
368                                        const char *buf, size_t count)
369 {
370         struct thermal_cooling_device *cdev = to_cooling_device(dev);
371         unsigned long state;
372         int result;
373
374         if (!sscanf(buf, "%ld\n", &state))
375                 return -EINVAL;
376
377         if (state < 0)
378                 return -EINVAL;
379
380         result = cdev->ops->set_cur_state(cdev, state);
381         if (result)
382                 return result;
383         return count;
384 }
385
386 static struct device_attribute dev_attr_cdev_type =
387 __ATTR(type, 0444, thermal_cooling_device_type_show, NULL);
388 static DEVICE_ATTR(max_state, 0444,
389                    thermal_cooling_device_max_state_show, NULL);
390 static DEVICE_ATTR(cur_state, 0644,
391                    thermal_cooling_device_cur_state_show,
392                    thermal_cooling_device_cur_state_store);
393
394 static ssize_t
395 thermal_cooling_device_trip_point_show(struct device *dev,
396                                        struct device_attribute *attr, char *buf)
397 {
398         struct thermal_cooling_device_instance *instance;
399
400         instance =
401             container_of(attr, struct thermal_cooling_device_instance, attr);
402
403         if (instance->trip == THERMAL_TRIPS_NONE)
404                 return sprintf(buf, "-1\n");
405         else
406                 return sprintf(buf, "%d\n", instance->trip);
407 }
408
409 /* Device management */
410
411 #if defined(CONFIG_THERMAL_HWMON)
412
413 /* hwmon sys I/F */
414 #include <linux/hwmon.h>
415 static LIST_HEAD(thermal_hwmon_list);
416
417 static ssize_t
418 name_show(struct device *dev, struct device_attribute *attr, char *buf)
419 {
420         struct thermal_hwmon_device *hwmon = dev_get_drvdata(dev);
421         return sprintf(buf, "%s\n", hwmon->type);
422 }
423 static DEVICE_ATTR(name, 0444, name_show, NULL);
424
425 static ssize_t
426 temp_input_show(struct device *dev, struct device_attribute *attr, char *buf)
427 {
428         long temperature;
429         int ret;
430         struct thermal_hwmon_attr *hwmon_attr
431                         = container_of(attr, struct thermal_hwmon_attr, attr);
432         struct thermal_zone_device *tz
433                         = container_of(hwmon_attr, struct thermal_zone_device,
434                                        temp_input);
435
436         ret = tz->ops->get_temp(tz, &temperature);
437
438         if (ret)
439                 return ret;
440
441         return sprintf(buf, "%ld\n", temperature);
442 }
443
444 static ssize_t
445 temp_crit_show(struct device *dev, struct device_attribute *attr,
446                 char *buf)
447 {
448         struct thermal_hwmon_attr *hwmon_attr
449                         = container_of(attr, struct thermal_hwmon_attr, attr);
450         struct thermal_zone_device *tz
451                         = container_of(hwmon_attr, struct thermal_zone_device,
452                                        temp_crit);
453         long temperature;
454         int ret;
455
456         ret = tz->ops->get_trip_temp(tz, 0, &temperature);
457         if (ret)
458                 return ret;
459
460         return sprintf(buf, "%ld\n", temperature);
461 }
462
463
464 static int
465 thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
466 {
467         struct thermal_hwmon_device *hwmon;
468         int new_hwmon_device = 1;
469         int result;
470
471         mutex_lock(&thermal_list_lock);
472         list_for_each_entry(hwmon, &thermal_hwmon_list, node)
473                 if (!strcmp(hwmon->type, tz->type)) {
474                         new_hwmon_device = 0;
475                         mutex_unlock(&thermal_list_lock);
476                         goto register_sys_interface;
477                 }
478         mutex_unlock(&thermal_list_lock);
479
480         hwmon = kzalloc(sizeof(struct thermal_hwmon_device), GFP_KERNEL);
481         if (!hwmon)
482                 return -ENOMEM;
483
484         INIT_LIST_HEAD(&hwmon->tz_list);
485         strlcpy(hwmon->type, tz->type, THERMAL_NAME_LENGTH);
486         hwmon->device = hwmon_device_register(NULL);
487         if (IS_ERR(hwmon->device)) {
488                 result = PTR_ERR(hwmon->device);
489                 goto free_mem;
490         }
491         dev_set_drvdata(hwmon->device, hwmon);
492         result = device_create_file(hwmon->device, &dev_attr_name);
493         if (result)
494                 goto unregister_hwmon_device;
495
496  register_sys_interface:
497         tz->hwmon = hwmon;
498         hwmon->count++;
499
500         snprintf(tz->temp_input.name, THERMAL_NAME_LENGTH,
501                  "temp%d_input", hwmon->count);
502         tz->temp_input.attr.attr.name = tz->temp_input.name;
503         tz->temp_input.attr.attr.mode = 0444;
504         tz->temp_input.attr.show = temp_input_show;
505         result = device_create_file(hwmon->device, &tz->temp_input.attr);
506         if (result)
507                 goto unregister_hwmon_device;
508
509         if (tz->ops->get_crit_temp) {
510                 unsigned long temperature;
511                 if (!tz->ops->get_crit_temp(tz, &temperature)) {
512                         snprintf(tz->temp_crit.name, THERMAL_NAME_LENGTH,
513                                 "temp%d_crit", hwmon->count);
514                         tz->temp_crit.attr.attr.name = tz->temp_crit.name;
515                         tz->temp_crit.attr.attr.mode = 0444;
516                         tz->temp_crit.attr.show = temp_crit_show;
517                         result = device_create_file(hwmon->device,
518                                                     &tz->temp_crit.attr);
519                         if (result)
520                                 goto unregister_hwmon_device;
521                 }
522         }
523
524         mutex_lock(&thermal_list_lock);
525         if (new_hwmon_device)
526                 list_add_tail(&hwmon->node, &thermal_hwmon_list);
527         list_add_tail(&tz->hwmon_node, &hwmon->tz_list);
528         mutex_unlock(&thermal_list_lock);
529
530         return 0;
531
532  unregister_hwmon_device:
533         device_remove_file(hwmon->device, &tz->temp_crit.attr);
534         device_remove_file(hwmon->device, &tz->temp_input.attr);
535         if (new_hwmon_device) {
536                 device_remove_file(hwmon->device, &dev_attr_name);
537                 hwmon_device_unregister(hwmon->device);
538         }
539  free_mem:
540         if (new_hwmon_device)
541                 kfree(hwmon);
542
543         return result;
544 }
545
546 static void
547 thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
548 {
549         struct thermal_hwmon_device *hwmon = tz->hwmon;
550
551         tz->hwmon = NULL;
552         device_remove_file(hwmon->device, &tz->temp_input.attr);
553         device_remove_file(hwmon->device, &tz->temp_crit.attr);
554
555         mutex_lock(&thermal_list_lock);
556         list_del(&tz->hwmon_node);
557         if (!list_empty(&hwmon->tz_list)) {
558                 mutex_unlock(&thermal_list_lock);
559                 return;
560         }
561         list_del(&hwmon->node);
562         mutex_unlock(&thermal_list_lock);
563
564         device_remove_file(hwmon->device, &dev_attr_name);
565         hwmon_device_unregister(hwmon->device);
566         kfree(hwmon);
567 }
568 #else
569 static int
570 thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
571 {
572         return 0;
573 }
574
575 static void
576 thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
577 {
578 }
579 #endif
580
581 static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
582                                             int delay)
583 {
584         cancel_delayed_work(&(tz->poll_queue));
585
586         if (!delay)
587                 return;
588
589         if (delay > 1000)
590                 schedule_delayed_work(&(tz->poll_queue),
591                                       round_jiffies(msecs_to_jiffies(delay)));
592         else
593                 schedule_delayed_work(&(tz->poll_queue),
594                                       msecs_to_jiffies(delay));
595 }
596
597 static void thermal_zone_device_passive(struct thermal_zone_device *tz,
598                                         int temp, int trip_temp, int trip)
599 {
600         int trend = 0;
601         struct thermal_cooling_device_instance *instance;
602         struct thermal_cooling_device *cdev;
603         long state, max_state;
604
605         /*
606          * Above Trip?
607          * -----------
608          * Calculate the thermal trend (using the passive cooling equation)
609          * and modify the performance limit for all passive cooling devices
610          * accordingly.  Note that we assume symmetry.
611          */
612         if (temp >= trip_temp) {
613                 tz->passive = true;
614
615                 trend = (tz->tc1 * (temp - tz->last_temperature)) +
616                         (tz->tc2 * (temp - trip_temp));
617
618                 /* Heating up? */
619                 if (trend > 0) {
620                         list_for_each_entry(instance, &tz->cooling_devices,
621                                             node) {
622                                 if (instance->trip != trip)
623                                         continue;
624                                 cdev = instance->cdev;
625                                 cdev->ops->get_cur_state(cdev, &state);
626                                 cdev->ops->get_max_state(cdev, &max_state);
627                                 if (state++ < max_state)
628                                         cdev->ops->set_cur_state(cdev, state);
629                         }
630                 } else if (trend < 0) { /* Cooling off? */
631                         list_for_each_entry(instance, &tz->cooling_devices,
632                                             node) {
633                                 if (instance->trip != trip)
634                                         continue;
635                                 cdev = instance->cdev;
636                                 cdev->ops->get_cur_state(cdev, &state);
637                                 cdev->ops->get_max_state(cdev, &max_state);
638                                 if (state > 0)
639                                         cdev->ops->set_cur_state(cdev, --state);
640                         }
641                 }
642                 return;
643         }
644
645         /*
646          * Below Trip?
647          * -----------
648          * Implement passive cooling hysteresis to slowly increase performance
649          * and avoid thrashing around the passive trip point.  Note that we
650          * assume symmetry.
651          */
652         list_for_each_entry(instance, &tz->cooling_devices, node) {
653                 if (instance->trip != trip)
654                         continue;
655                 cdev = instance->cdev;
656                 cdev->ops->get_cur_state(cdev, &state);
657                 cdev->ops->get_max_state(cdev, &max_state);
658                 if (state > 0)
659                         cdev->ops->set_cur_state(cdev, --state);
660                 if (state == 0)
661                         tz->passive = false;
662         }
663 }
664
665 static void thermal_zone_device_check(struct work_struct *work)
666 {
667         struct thermal_zone_device *tz = container_of(work, struct
668                                                       thermal_zone_device,
669                                                       poll_queue.work);
670         thermal_zone_device_update(tz);
671 }
672
673 /**
674  * thermal_zone_bind_cooling_device - bind a cooling device to a thermal zone
675  * @tz:         thermal zone device
676  * @trip:       indicates which trip point the cooling devices is
677  *              associated with in this thermal zone.
678  * @cdev:       thermal cooling device
679  *
680  * This function is usually called in the thermal zone device .bind callback.
681  */
682 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
683                                      int trip,
684                                      struct thermal_cooling_device *cdev)
685 {
686         struct thermal_cooling_device_instance *dev;
687         struct thermal_cooling_device_instance *pos;
688         struct thermal_zone_device *pos1;
689         struct thermal_cooling_device *pos2;
690         int result;
691
692         if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE))
693                 return -EINVAL;
694
695         list_for_each_entry(pos1, &thermal_tz_list, node) {
696                 if (pos1 == tz)
697                         break;
698         }
699         list_for_each_entry(pos2, &thermal_cdev_list, node) {
700                 if (pos2 == cdev)
701                         break;
702         }
703
704         if (tz != pos1 || cdev != pos2)
705                 return -EINVAL;
706
707         dev =
708             kzalloc(sizeof(struct thermal_cooling_device_instance), GFP_KERNEL);
709         if (!dev)
710                 return -ENOMEM;
711         dev->tz = tz;
712         dev->cdev = cdev;
713         dev->trip = trip;
714         result = get_idr(&tz->idr, &tz->lock, &dev->id);
715         if (result)
716                 goto free_mem;
717
718         sprintf(dev->name, "cdev%d", dev->id);
719         result =
720             sysfs_create_link(&tz->device.kobj, &cdev->device.kobj, dev->name);
721         if (result)
722                 goto release_idr;
723
724         sprintf(dev->attr_name, "cdev%d_trip_point", dev->id);
725         dev->attr.attr.name = dev->attr_name;
726         dev->attr.attr.mode = 0444;
727         dev->attr.show = thermal_cooling_device_trip_point_show;
728         result = device_create_file(&tz->device, &dev->attr);
729         if (result)
730                 goto remove_symbol_link;
731
732         mutex_lock(&tz->lock);
733         list_for_each_entry(pos, &tz->cooling_devices, node)
734             if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
735                 result = -EEXIST;
736                 break;
737         }
738         if (!result)
739                 list_add_tail(&dev->node, &tz->cooling_devices);
740         mutex_unlock(&tz->lock);
741
742         if (!result)
743                 return 0;
744
745         device_remove_file(&tz->device, &dev->attr);
746       remove_symbol_link:
747         sysfs_remove_link(&tz->device.kobj, dev->name);
748       release_idr:
749         release_idr(&tz->idr, &tz->lock, dev->id);
750       free_mem:
751         kfree(dev);
752         return result;
753 }
754
755 EXPORT_SYMBOL(thermal_zone_bind_cooling_device);
756
757 /**
758  * thermal_zone_unbind_cooling_device - unbind a cooling device from a thermal zone
759  * @tz:         thermal zone device
760  * @trip:       indicates which trip point the cooling devices is
761  *              associated with in this thermal zone.
762  * @cdev:       thermal cooling device
763  *
764  * This function is usually called in the thermal zone device .unbind callback.
765  */
766 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
767                                        int trip,
768                                        struct thermal_cooling_device *cdev)
769 {
770         struct thermal_cooling_device_instance *pos, *next;
771
772         mutex_lock(&tz->lock);
773         list_for_each_entry_safe(pos, next, &tz->cooling_devices, node) {
774                 if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
775                         list_del(&pos->node);
776                         mutex_unlock(&tz->lock);
777                         goto unbind;
778                 }
779         }
780         mutex_unlock(&tz->lock);
781
782         return -ENODEV;
783
784       unbind:
785         device_remove_file(&tz->device, &pos->attr);
786         sysfs_remove_link(&tz->device.kobj, pos->name);
787         release_idr(&tz->idr, &tz->lock, pos->id);
788         kfree(pos);
789         return 0;
790 }
791
792 EXPORT_SYMBOL(thermal_zone_unbind_cooling_device);
793
794 static void thermal_release(struct device *dev)
795 {
796         struct thermal_zone_device *tz;
797         struct thermal_cooling_device *cdev;
798
799         if (!strncmp(dev_name(dev), "thermal_zone", sizeof "thermal_zone" - 1)) {
800                 tz = to_thermal_zone(dev);
801                 kfree(tz);
802         } else {
803                 cdev = to_cooling_device(dev);
804                 kfree(cdev);
805         }
806 }
807
808 static struct class thermal_class = {
809         .name = "thermal",
810         .dev_release = thermal_release,
811 };
812
813 /**
814  * thermal_cooling_device_register - register a new thermal cooling device
815  * @type:       the thermal cooling device type.
816  * @devdata:    device private data.
817  * @ops:                standard thermal cooling devices callbacks.
818  */
819 struct thermal_cooling_device *thermal_cooling_device_register(char *type,
820                                                                void *devdata,
821                                                                struct
822                                                                thermal_cooling_device_ops
823                                                                *ops)
824 {
825         struct thermal_cooling_device *cdev;
826         struct thermal_zone_device *pos;
827         int result;
828
829         if (strlen(type) >= THERMAL_NAME_LENGTH)
830                 return ERR_PTR(-EINVAL);
831
832         if (!ops || !ops->get_max_state || !ops->get_cur_state ||
833             !ops->set_cur_state)
834                 return ERR_PTR(-EINVAL);
835
836         cdev = kzalloc(sizeof(struct thermal_cooling_device), GFP_KERNEL);
837         if (!cdev)
838                 return ERR_PTR(-ENOMEM);
839
840         result = get_idr(&thermal_cdev_idr, &thermal_idr_lock, &cdev->id);
841         if (result) {
842                 kfree(cdev);
843                 return ERR_PTR(result);
844         }
845
846         strcpy(cdev->type, type);
847         cdev->ops = ops;
848         cdev->device.class = &thermal_class;
849         cdev->devdata = devdata;
850         dev_set_name(&cdev->device, "cooling_device%d", cdev->id);
851         result = device_register(&cdev->device);
852         if (result) {
853                 release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id);
854                 kfree(cdev);
855                 return ERR_PTR(result);
856         }
857
858         /* sys I/F */
859         if (type) {
860                 result = device_create_file(&cdev->device, &dev_attr_cdev_type);
861                 if (result)
862                         goto unregister;
863         }
864
865         result = device_create_file(&cdev->device, &dev_attr_max_state);
866         if (result)
867                 goto unregister;
868
869         result = device_create_file(&cdev->device, &dev_attr_cur_state);
870         if (result)
871                 goto unregister;
872
873         mutex_lock(&thermal_list_lock);
874         list_add(&cdev->node, &thermal_cdev_list);
875         list_for_each_entry(pos, &thermal_tz_list, node) {
876                 if (!pos->ops->bind)
877                         continue;
878                 result = pos->ops->bind(pos, cdev);
879                 if (result)
880                         break;
881
882         }
883         mutex_unlock(&thermal_list_lock);
884
885         if (!result)
886                 return cdev;
887
888       unregister:
889         release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id);
890         device_unregister(&cdev->device);
891         return ERR_PTR(result);
892 }
893
894 EXPORT_SYMBOL(thermal_cooling_device_register);
895
896 /**
897  * thermal_cooling_device_unregister - removes the registered thermal cooling device
898  * @cdev:       the thermal cooling device to remove.
899  *
900  * thermal_cooling_device_unregister() must be called when the device is no
901  * longer needed.
902  */
903 void thermal_cooling_device_unregister(struct
904                                        thermal_cooling_device
905                                        *cdev)
906 {
907         struct thermal_zone_device *tz;
908         struct thermal_cooling_device *pos = NULL;
909
910         if (!cdev)
911                 return;
912
913         mutex_lock(&thermal_list_lock);
914         list_for_each_entry(pos, &thermal_cdev_list, node)
915             if (pos == cdev)
916                 break;
917         if (pos != cdev) {
918                 /* thermal cooling device not found */
919                 mutex_unlock(&thermal_list_lock);
920                 return;
921         }
922         list_del(&cdev->node);
923         list_for_each_entry(tz, &thermal_tz_list, node) {
924                 if (!tz->ops->unbind)
925                         continue;
926                 tz->ops->unbind(tz, cdev);
927         }
928         mutex_unlock(&thermal_list_lock);
929         if (cdev->type[0])
930                 device_remove_file(&cdev->device, &dev_attr_cdev_type);
931         device_remove_file(&cdev->device, &dev_attr_max_state);
932         device_remove_file(&cdev->device, &dev_attr_cur_state);
933
934         release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id);
935         device_unregister(&cdev->device);
936         return;
937 }
938
939 EXPORT_SYMBOL(thermal_cooling_device_unregister);
940
941 /**
942  * thermal_zone_device_update - force an update of a thermal zone's state
943  * @ttz:        the thermal zone to update
944  */
945
946 void thermal_zone_device_update(struct thermal_zone_device *tz)
947 {
948         int count, ret = 0;
949         long temp, trip_temp;
950         enum thermal_trip_type trip_type;
951         struct thermal_cooling_device_instance *instance;
952         struct thermal_cooling_device *cdev;
953
954         mutex_lock(&tz->lock);
955
956         tz->ops->get_temp(tz, &temp);
957
958         for (count = 0; count < tz->trips; count++) {
959                 tz->ops->get_trip_type(tz, count, &trip_type);
960                 tz->ops->get_trip_temp(tz, count, &trip_temp);
961
962                 switch (trip_type) {
963                 case THERMAL_TRIP_CRITICAL:
964                         if (temp >= trip_temp) {
965                                 if (tz->ops->notify)
966                                         ret = tz->ops->notify(tz, count,
967                                                               trip_type);
968                                 if (!ret) {
969                                         printk(KERN_EMERG
970                                                "Critical temperature reached (%ld C), shutting down.\n",
971                                                temp/1000);
972                                         orderly_poweroff(true);
973                                 }
974                         }
975                         break;
976                 case THERMAL_TRIP_HOT:
977                         if (temp >= trip_temp)
978                                 if (tz->ops->notify)
979                                         tz->ops->notify(tz, count, trip_type);
980                         break;
981                 case THERMAL_TRIP_ACTIVE:
982                         list_for_each_entry(instance, &tz->cooling_devices,
983                                             node) {
984                                 if (instance->trip != count)
985                                         continue;
986
987                                 cdev = instance->cdev;
988
989                                 if (temp >= trip_temp)
990                                         cdev->ops->set_cur_state(cdev, 1);
991                                 else
992                                         cdev->ops->set_cur_state(cdev, 0);
993                         }
994                         break;
995                 case THERMAL_TRIP_PASSIVE:
996                         if (temp >= trip_temp || tz->passive)
997                                 thermal_zone_device_passive(tz, temp,
998                                                             trip_temp, count);
999                         break;
1000                 }
1001         }
1002
1003         if (tz->forced_passive)
1004                 thermal_zone_device_passive(tz, temp, tz->forced_passive,
1005                                             THERMAL_TRIPS_NONE);
1006
1007         tz->last_temperature = temp;
1008         if (tz->passive)
1009                 thermal_zone_device_set_polling(tz, tz->passive_delay);
1010         else if (tz->polling_delay)
1011                 thermal_zone_device_set_polling(tz, tz->polling_delay);
1012         mutex_unlock(&tz->lock);
1013 }
1014 EXPORT_SYMBOL(thermal_zone_device_update);
1015
1016 /**
1017  * thermal_zone_device_register - register a new thermal zone device
1018  * @type:       the thermal zone device type
1019  * @trips:      the number of trip points the thermal zone support
1020  * @devdata:    private device data
1021  * @ops:        standard thermal zone device callbacks
1022  * @tc1:        thermal coefficient 1 for passive calculations
1023  * @tc2:        thermal coefficient 2 for passive calculations
1024  * @passive_delay: number of milliseconds to wait between polls when
1025  *                 performing passive cooling
1026  * @polling_delay: number of milliseconds to wait between polls when checking
1027  *                 whether trip points have been crossed (0 for interrupt
1028  *                 driven systems)
1029  *
1030  * thermal_zone_device_unregister() must be called when the device is no
1031  * longer needed. The passive cooling formula uses tc1 and tc2 as described in
1032  * section 11.1.5.1 of the ACPI specification 3.0.
1033  */
1034 struct thermal_zone_device *thermal_zone_device_register(char *type,
1035                                                          int trips,
1036                                                          void *devdata, struct
1037                                                          thermal_zone_device_ops
1038                                                          *ops, int tc1, int
1039                                                          tc2,
1040                                                          int passive_delay,
1041                                                          int polling_delay)
1042 {
1043         struct thermal_zone_device *tz;
1044         struct thermal_cooling_device *pos;
1045         enum thermal_trip_type trip_type;
1046         int result;
1047         int count;
1048         int passive = 0;
1049
1050         if (strlen(type) >= THERMAL_NAME_LENGTH)
1051                 return ERR_PTR(-EINVAL);
1052
1053         if (trips > THERMAL_MAX_TRIPS || trips < 0)
1054                 return ERR_PTR(-EINVAL);
1055
1056         if (!ops || !ops->get_temp)
1057                 return ERR_PTR(-EINVAL);
1058
1059         tz = kzalloc(sizeof(struct thermal_zone_device), GFP_KERNEL);
1060         if (!tz)
1061                 return ERR_PTR(-ENOMEM);
1062
1063         INIT_LIST_HEAD(&tz->cooling_devices);
1064         idr_init(&tz->idr);
1065         mutex_init(&tz->lock);
1066         result = get_idr(&thermal_tz_idr, &thermal_idr_lock, &tz->id);
1067         if (result) {
1068                 kfree(tz);
1069                 return ERR_PTR(result);
1070         }
1071
1072         strcpy(tz->type, type);
1073         tz->ops = ops;
1074         tz->device.class = &thermal_class;
1075         tz->devdata = devdata;
1076         tz->trips = trips;
1077         tz->tc1 = tc1;
1078         tz->tc2 = tc2;
1079         tz->passive_delay = passive_delay;
1080         tz->polling_delay = polling_delay;
1081
1082         dev_set_name(&tz->device, "thermal_zone%d", tz->id);
1083         result = device_register(&tz->device);
1084         if (result) {
1085                 release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
1086                 kfree(tz);
1087                 return ERR_PTR(result);
1088         }
1089
1090         /* sys I/F */
1091         if (type) {
1092                 result = device_create_file(&tz->device, &dev_attr_type);
1093                 if (result)
1094                         goto unregister;
1095         }
1096
1097         result = device_create_file(&tz->device, &dev_attr_temp);
1098         if (result)
1099                 goto unregister;
1100
1101         if (ops->get_mode) {
1102                 result = device_create_file(&tz->device, &dev_attr_mode);
1103                 if (result)
1104                         goto unregister;
1105         }
1106
1107         for (count = 0; count < trips; count++) {
1108                 TRIP_POINT_ATTR_ADD(&tz->device, count, result);
1109                 if (result)
1110                         goto unregister;
1111                 tz->ops->get_trip_type(tz, count, &trip_type);
1112                 if (trip_type == THERMAL_TRIP_PASSIVE)
1113                         passive = 1;
1114         }
1115
1116         if (!passive)
1117                 result = device_create_file(&tz->device,
1118                                             &dev_attr_passive);
1119
1120         if (result)
1121                 goto unregister;
1122
1123         result = thermal_add_hwmon_sysfs(tz);
1124         if (result)
1125                 goto unregister;
1126
1127         mutex_lock(&thermal_list_lock);
1128         list_add_tail(&tz->node, &thermal_tz_list);
1129         if (ops->bind)
1130                 list_for_each_entry(pos, &thermal_cdev_list, node) {
1131                 result = ops->bind(tz, pos);
1132                 if (result)
1133                         break;
1134                 }
1135         mutex_unlock(&thermal_list_lock);
1136
1137         INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check);
1138
1139         thermal_zone_device_update(tz);
1140
1141         if (!result)
1142                 return tz;
1143
1144       unregister:
1145         release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
1146         device_unregister(&tz->device);
1147         return ERR_PTR(result);
1148 }
1149
1150 EXPORT_SYMBOL(thermal_zone_device_register);
1151
1152 /**
1153  * thermal_device_unregister - removes the registered thermal zone device
1154  * @tz: the thermal zone device to remove
1155  */
1156 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
1157 {
1158         struct thermal_cooling_device *cdev;
1159         struct thermal_zone_device *pos = NULL;
1160         int count;
1161
1162         if (!tz)
1163                 return;
1164
1165         mutex_lock(&thermal_list_lock);
1166         list_for_each_entry(pos, &thermal_tz_list, node)
1167             if (pos == tz)
1168                 break;
1169         if (pos != tz) {
1170                 /* thermal zone device not found */
1171                 mutex_unlock(&thermal_list_lock);
1172                 return;
1173         }
1174         list_del(&tz->node);
1175         if (tz->ops->unbind)
1176                 list_for_each_entry(cdev, &thermal_cdev_list, node)
1177                     tz->ops->unbind(tz, cdev);
1178         mutex_unlock(&thermal_list_lock);
1179
1180         thermal_zone_device_set_polling(tz, 0);
1181
1182         if (tz->type[0])
1183                 device_remove_file(&tz->device, &dev_attr_type);
1184         device_remove_file(&tz->device, &dev_attr_temp);
1185         if (tz->ops->get_mode)
1186                 device_remove_file(&tz->device, &dev_attr_mode);
1187
1188         for (count = 0; count < tz->trips; count++)
1189                 TRIP_POINT_ATTR_REMOVE(&tz->device, count);
1190
1191         thermal_remove_hwmon_sysfs(tz);
1192         release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
1193         idr_destroy(&tz->idr);
1194         mutex_destroy(&tz->lock);
1195         device_unregister(&tz->device);
1196         return;
1197 }
1198
1199 EXPORT_SYMBOL(thermal_zone_device_unregister);
1200
1201 static int __init thermal_init(void)
1202 {
1203         int result = 0;
1204
1205         result = class_register(&thermal_class);
1206         if (result) {
1207                 idr_destroy(&thermal_tz_idr);
1208                 idr_destroy(&thermal_cdev_idr);
1209                 mutex_destroy(&thermal_idr_lock);
1210                 mutex_destroy(&thermal_list_lock);
1211         }
1212         return result;
1213 }
1214
1215 static void __exit thermal_exit(void)
1216 {
1217         class_unregister(&thermal_class);
1218         idr_destroy(&thermal_tz_idr);
1219         idr_destroy(&thermal_cdev_idr);
1220         mutex_destroy(&thermal_idr_lock);
1221         mutex_destroy(&thermal_list_lock);
1222 }
1223
1224 subsys_initcall(thermal_init);
1225 module_exit(thermal_exit);