drivers/staging/tm6000/tm6000-cards.c

   1 /*
   2    tm6000-cards.c - driver for TM5600/TM6000 USB video capture devices
   3
   4    Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
   5
   6    This program is free software; you can redistribute it and/or modify
   7    it under the terms of the GNU General Public License as published by
   8    the Free Software Foundation version 2
   9
  10    This program is distributed in the hope that it will be useful,
  11    but WITHOUT ANY WARRANTY; without even the implied warranty of
  12    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13    GNU General Public License for more details.
  14
  15    You should have received a copy of the GNU General Public License
  16    along with this program; if not, write to the Free Software
  17    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  18  */
  19
  20 #include <linux/init.h>
  21 #include <linux/module.h>
  22 #include <linux/pci.h>
  23 #include <linux/delay.h>
  24 #include <linux/i2c.h>
  25 #include <linux/usb.h>
  26 #include <linux/version.h>
  27 #include <media/v4l2-common.h>
  28 #include <media/tuner.h>
  29 #include <media/tvaudio.h>
  30 #include <media/i2c-addr.h>
  31
  32 #include "tm6000.h"
  33 #include "tm6000-regs.h"
  34 #include "tuner-xc2028.h"
  35 #include "tuner-xc5000.h"
  36
  37 #define TM6000_BOARD_UNKNOWN                    0
  38 #define TM5600_BOARD_GENERIC                    1
  39 #define TM6000_BOARD_GENERIC                    2
  40 #define TM6010_BOARD_GENERIC                    3
  41 #define TM5600_BOARD_10MOONS_UT821              4
  42 #define TM5600_BOARD_10MOONS_UT330              5
  43 #define TM6000_BOARD_ADSTECH_DUAL_TV            6
  44 #define TM6000_BOARD_FREECOM_AND_SIMILAR        7
  45 #define TM6000_BOARD_ADSTECH_MINI_DUAL_TV       8
  46 #define TM6010_BOARD_HAUPPAUGE_900H             9
  47
  48 #define TM6000_MAXBOARDS        16
  49 static unsigned int card[]     = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
  50
  51 module_param_array(card,  int, NULL, 0444);
  52
  53 static unsigned long tm6000_devused;
  54
  55
  56 struct tm6000_board {
  57         char            *name;
  58
  59         struct tm6000_capabilities caps;
  60
  61         enum            tm6000_devtype type;    /* variant of the chipset */
  62         int             tuner_type;     /* type of the tuner */
  63         int             tuner_addr;     /* tuner address */
  64         int             demod_addr;     /* demodulator address */
  65         int             gpio_addr_tun_reset;    /* GPIO used for tuner reset */
  66 };
  67
  68 struct tm6000_board tm6000_boards[] = {
  69         [TM6000_BOARD_UNKNOWN] = {
  70                 .name         = "Unknown tm6000 video grabber",
  71                 .caps = {
  72                         .has_tuner    = 1,
  73                 },
  74                 .gpio_addr_tun_reset = TM6000_GPIO_1,
  75         },
  76         [TM5600_BOARD_GENERIC] = {
  77                 .name         = "Generic tm5600 board",
  78                 .type         = TM5600,
  79                 .tuner_type   = TUNER_XC2028,
  80                 .tuner_addr   = 0xc2 >> 1,
  81                 .caps = {
  82                         .has_tuner      = 1,
  83                 },
  84                 .gpio_addr_tun_reset = TM6000_GPIO_1,
  85         },
  86         [TM6000_BOARD_GENERIC] = {
  87                 .name         = "Generic tm6000 board",
  88                 .tuner_type   = TUNER_XC2028,
  89                 .tuner_addr   = 0xc2 >> 1,
  90                 .caps = {
  91                         .has_tuner      = 1,
  92                         .has_dvb        = 1,
  93                 },
  94                 .gpio_addr_tun_reset = TM6000_GPIO_1,
  95         },
  96         [TM6010_BOARD_GENERIC] = {
  97                 .name         = "Generic tm6010 board",
  98                 .type         = TM6010,
  99                 .tuner_type   = TUNER_XC2028,
 100                 .tuner_addr   = 0xc2 >> 1,
 101                 .caps = {
 102                         .has_tuner      = 1,
 103                         .has_dvb        = 1,
 104                 },
 105                 .gpio_addr_tun_reset = TM6010_GPIO_4,
 106         },
 107         [TM5600_BOARD_10MOONS_UT821] = {
 108                 .name         = "10Moons UT 821",
 109                 .tuner_type   = TUNER_XC2028,
 110                 .type         = TM5600,
 111                 .tuner_addr   = 0xc2 >> 1,
 112                 .caps = {
 113                         .has_tuner    = 1,
 114                         .has_eeprom   = 1,
 115                 },
 116                 .gpio_addr_tun_reset = TM6000_GPIO_1,
 117         },
 118         [TM5600_BOARD_10MOONS_UT330] = {
 119                 .name         = "10Moons UT 330",
 120                 .tuner_type   = TUNER_PHILIPS_FQ1216AME_MK4,
 121                 .tuner_addr   = 0xc8 >> 1,
 122                 .caps = {
 123                         .has_tuner    = 1,
 124                         .has_dvb      = 0,
 125                         .has_zl10353  = 0,
 126                         .has_eeprom   = 1,
 127                 },
 128         },
 129         [TM6000_BOARD_ADSTECH_DUAL_TV] = {
 130                 .name         = "ADSTECH Dual TV USB",
 131                 .tuner_type   = TUNER_XC2028,
 132                 .tuner_addr   = 0xc8 >> 1,
 133                 .caps = {
 134                         .has_tuner    = 1,
 135                         .has_tda9874  = 1,
 136                         .has_dvb      = 1,
 137                         .has_zl10353  = 1,
 138                         .has_eeprom   = 1,
 139                 },
 140         },
 141         [TM6000_BOARD_FREECOM_AND_SIMILAR] = {
 142                 .name         = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual",
 143                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 144                 .tuner_addr   = 0xc2 >> 1,
 145                 .demod_addr   = 0x1e >> 1,
 146                 .caps = {
 147                         .has_tuner    = 1,
 148                         .has_dvb      = 1,
 149                         .has_zl10353  = 1,
 150                         .has_eeprom   = 0,
 151                         .has_remote   = 1,
 152                 },
 153                 .gpio_addr_tun_reset = TM6000_GPIO_4,
 154         },
 155         [TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = {
 156                 .name         = "ADSTECH Mini Dual TV USB",
 157                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 158                 .tuner_addr   = 0xc8 >> 1,
 159                 .demod_addr   = 0x1e >> 1,
 160                 .caps = {
 161                         .has_tuner    = 1,
 162                         .has_dvb      = 1,
 163                         .has_zl10353  = 1,
 164                         .has_eeprom   = 0,
 165                 },
 166                 .gpio_addr_tun_reset = TM6000_GPIO_4,
 167         },
 168         [TM6010_BOARD_HAUPPAUGE_900H] = {
 169                 .name         = "Hauppauge HVR-900H",
 170                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 171                 .tuner_addr   = 0xc2 >> 1,
 172                 .demod_addr   = 0x1e >> 1,
 173                 .type         = TM6010,
 174                 .caps = {
 175                         .has_tuner    = 1,
 176                         .has_dvb      = 1,
 177                         .has_zl10353  = 1,
 178                         .has_eeprom   = 1,
 179                 },
 180                 .gpio_addr_tun_reset = TM6000_GPIO_2,
 181         },
 182         [TM6010_BOARD_BEHOLD_WANDER] = {
 183                 .name         = "Beholder Wander DVB-T/TV/FM USB2.0",
 184                 .tuner_type   = TUNER_XC5000,
 185                 .tuner_addr   = 0xc2 >> 1,
 186                 .demod_addr   = 0x1e >> 1,
 187                 .type         = TM6010,
 188                 .caps = {
 189                         .has_tuner    = 1,
 190                         .has_dvb      = 1,
 191                         .has_zl10353  = 1,
 192                         .has_eeprom   = 1,
 193                         .has_remote   = 1,
 194                 },
 195                 .gpio_addr_tun_reset = TM6000_GPIO_2,
 196         },
 197         [TM6010_BOARD_BEHOLD_VOYAGER] = {
 198                 .name         = "Beholder Voyager TV/FM USB2.0",
 199                 .tuner_type   = TUNER_XC5000,
 200                 .tuner_addr   = 0xc2 >> 1,
 201                 .type         = TM6010,
 202                 .caps = {
 203                         .has_tuner    = 1,
 204                         .has_dvb      = 0,
 205                         .has_zl10353  = 0,
 206                         .has_eeprom   = 1,
 207                         .has_remote   = 1,
 208                 },
 209                 .gpio_addr_tun_reset = TM6000_GPIO_2,
 210         },
 211
 212 };
 213
 214 /* table of devices that work with this driver */
 215 struct usb_device_id tm6000_id_table [] = {
 216         { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_10MOONS_UT821 },
 217         { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC },
 218         { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV },
 219         { USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR },
 220         { USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV },
 221         { USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
 222         { USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER },
 223         { USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER },
 224         { },
 225 };
 226
 227 /* Tuner callback to provide the proper gpio changes needed for xc2028 */
 228
 229 static int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
 230 {
 231         int rc=0;
 232         struct tm6000_core *dev = ptr;
 233
 234         if (dev->tuner_type!=TUNER_XC2028)
 235                 return 0;
 236
 237         switch (command) {
 238         case XC2028_RESET_CLK:
 239                 tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT,
 240                                         0x02, arg);
 241                 msleep(10);
 242                 rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
 243                                         TM6000_GPIO_CLK, 0);
 244                 if (rc<0)
 245                         return rc;
 246                 msleep(10);
 247                 rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
 248                                         TM6000_GPIO_CLK, 1);
 249                 break;
 250         case XC2028_TUNER_RESET:
 251                 /* Reset codes during load firmware */
 252                 switch (arg) {
 253                 case 0:
 254                         tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
 255                                         dev->tuner_reset_gpio, 0x00);
 256                         msleep(130);
 257                         tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
 258                                         dev->tuner_reset_gpio, 0x01);
 259                         msleep(130);
 260                         break;
 261                 case 1:
 262                         tm6000_set_reg (dev, REQ_04_EN_DISABLE_MCU_INT,
 263                                                 0x02, 0x01);
 264                         msleep(10);
 265                         break;
 266
 267                 case 2:
 268                         rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
 269                                                 TM6000_GPIO_CLK, 0);
 270                         if (rc<0)
 271                                 return rc;
 272                         msleep(100);
 273                         rc=tm6000_set_reg (dev, REQ_03_SET_GET_MCU_PIN,
 274                                                 TM6000_GPIO_CLK, 1);
 275                         msleep(100);
 276                         break;
 277                 }
 278         }
 279         return (rc);
 280 }
 281
 282 static void tm6000_config_tuner (struct tm6000_core *dev)
 283 {
 284         struct tuner_setup           tun_setup;
 285
 286         /* Load tuner module */
 287         v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 288                 "tuner", "tuner",dev->tuner_addr, NULL);
 289
 290         memset(&tun_setup, 0, sizeof(tun_setup));
 291         tun_setup.type   = dev->tuner_type;
 292         tun_setup.addr   = dev->tuner_addr;
 293         tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
 294         tun_setup.tuner_callback = tm6000_tuner_callback;
 295
 296         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
 297
 298         if (dev->tuner_type == TUNER_XC2028) {
 299                 struct v4l2_priv_tun_config  xc2028_cfg;
 300                 struct xc2028_ctrl           ctl;
 301
 302                 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
 303                 memset (&ctl,0,sizeof(ctl));
 304
 305                 ctl.mts   = 1;
 306                 ctl.read_not_reliable = 1;
 307                 ctl.msleep = 10;
 308
 309                 xc2028_cfg.tuner = TUNER_XC2028;
 310                 xc2028_cfg.priv  = &ctl;
 311
 312                 switch(dev->model) {
 313                 case TM6010_BOARD_HAUPPAUGE_900H:
 314                         ctl.fname = "xc3028L-v36.fw";
 315                         break;
 316                 default:
 317                         if (dev->dev_type == TM6010)
 318                                 ctl.fname = "xc3028-v27.fw";
 319                         else
 320                                 ctl.fname = "tm6000-xc3028.fw";
 321                 }
 322
 323                 printk(KERN_INFO "Setting firmware parameters for xc2028\n");
 324
 325                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
 326                                      &xc2028_cfg);
 327         }
 328 }
 329
 330 static int tm6000_init_dev(struct tm6000_core *dev)
 331 {
 332         struct v4l2_frequency f;
 333         int rc = 0;
 334
 335         mutex_init(&dev->lock);
 336
 337         mutex_lock(&dev->lock);
 338
 339         /* Initializa board-specific data */
 340         dev->dev_type   = tm6000_boards[dev->model].type;
 341         dev->tuner_type = tm6000_boards[dev->model].tuner_type;
 342         dev->tuner_addr = tm6000_boards[dev->model].tuner_addr;
 343         dev->tuner_reset_gpio = tm6000_boards[dev->model].gpio_addr_tun_reset;
 344
 345         dev->demod_addr = tm6000_boards[dev->model].demod_addr;
 346
 347         dev->caps = tm6000_boards[dev->model].caps;
 348
 349         /* initialize hardware */
 350         rc=tm6000_init (dev);
 351         if (rc<0)
 352                 goto err;
 353
 354         rc = v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev);
 355         if (rc < 0)
 356                 goto err;
 357
 358         /* register i2c bus */
 359         rc=tm6000_i2c_register(dev);
 360         if (rc<0)
 361                 goto err;
 362
 363         /* register and initialize V4L2 */
 364         rc=tm6000_v4l2_register(dev);
 365         if (rc<0)
 366                 goto err;
 367
 368         /* Default values for STD and resolutions */
 369         dev->width = 720;
 370         dev->height = 480;
 371         dev->norm = V4L2_STD_PAL_M;
 372
 373         /* Configure tuner */
 374         tm6000_config_tuner (dev);
 375
 376         /* Set video standard */
 377         v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
 378
 379         /* Set tuner frequency - also loads firmware on xc2028/xc3028 */
 380         f.tuner = 0;
 381         f.type = V4L2_TUNER_ANALOG_TV;
 382         f.frequency = 3092;     /* 193.25 MHz */
 383         dev->freq = f.frequency;
 384         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
 385
 386         if (dev->caps.has_tda9874)
 387                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 388                         "tvaudio", "tvaudio", I2C_ADDR_TDA9874, NULL);
 389
 390         if(dev->caps.has_dvb) {
 391                 dev->dvb = kzalloc(sizeof(*(dev->dvb)), GFP_KERNEL);
 392                 if(!dev->dvb) {
 393                         rc = -ENOMEM;
 394                         goto err2;
 395                 }
 396 #ifdef CONFIG_VIDEO_TM6000_DVB
 397                 rc = tm6000_dvb_register(dev);
 398                 if(rc < 0) {
 399                         kfree(dev->dvb);
 400                         dev->dvb = NULL;
 401                         goto err2;
 402                 }
 403 #endif
 404         }
 405
 406 err2:
 407         v4l2_device_unregister(&dev->v4l2_dev);
 408
 409 err:
 410         mutex_unlock(&dev->lock);
 411         return rc;
 412 }
 413
 414 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
 415 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
 416
 417 static void get_max_endpoint (  struct usb_device *usbdev,
 418                                 char *msgtype,
 419                                 struct usb_host_endpoint *curr_e,
 420                                 unsigned int *maxsize,
 421                                 struct usb_host_endpoint **ep  )
 422 {
 423         u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize);
 424         unsigned int size = tmp & 0x7ff;
 425
 426         if (usbdev->speed == USB_SPEED_HIGH)
 427                 size = size * hb_mult (tmp);
 428
 429         if (size>*maxsize) {
 430                 *ep = curr_e;
 431                 *maxsize = size;
 432                 printk("tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n",
 433                                         msgtype, curr_e->desc.bEndpointAddress,
 434                                         size);
 435         }
 436 }
 437
 438 /*
 439  * tm6000_usb_probe()
 440  * checks for supported devices
 441  */
 442 static int tm6000_usb_probe(struct usb_interface *interface,
 443                             const struct usb_device_id *id)
 444 {
 445         struct usb_device *usbdev;
 446         struct tm6000_core *dev = NULL;
 447         int i,rc=0;
 448         int nr=0;
 449         char *speed;
 450
 451
 452         usbdev=usb_get_dev(interface_to_usbdev(interface));
 453
 454         /* Selects the proper interface */
 455         rc=usb_set_interface(usbdev,0,1);
 456         if (rc<0)
 457                 goto err;
 458
 459         /* Check to see next free device and mark as used */
 460         nr=find_first_zero_bit(&tm6000_devused,TM6000_MAXBOARDS);
 461         if (nr >= TM6000_MAXBOARDS) {
 462                 printk ("tm6000: Supports only %i em28xx boards.\n",TM6000_MAXBOARDS);
 463                 usb_put_dev(usbdev);
 464                 return -ENOMEM;
 465         }
 466
 467         /* Create and initialize dev struct */
 468         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 469         if (dev == NULL) {
 470                 printk ("tm6000" ": out of memory!\n");
 471                 usb_put_dev(usbdev);
 472                 return -ENOMEM;
 473         }
 474         spin_lock_init(&dev->slock);
 475
 476         /* Increment usage count */
 477         tm6000_devused|=1<<nr;
 478         snprintf(dev->name, 29, "tm6000 #%d", nr);
 479
 480         dev->model=id->driver_info;
 481         if ((card[nr]>=0) && (card[nr]<ARRAY_SIZE(tm6000_boards))) {
 482                 dev->model=card[nr];
 483         }
 484
 485         INIT_LIST_HEAD(&dev->tm6000_corelist);
 486         dev->udev= usbdev;
 487         dev->devno=nr;
 488
 489         switch (usbdev->speed) {
 490         case USB_SPEED_LOW:
 491                 speed = "1.5";
 492                 break;
 493         case USB_SPEED_UNKNOWN:
 494         case USB_SPEED_FULL:
 495                 speed = "12";
 496                 break;
 497         case USB_SPEED_HIGH:
 498                 speed = "480";
 499                 break;
 500         default:
 501                 speed = "unknown";
 502         }
 503
 504
 505
 506         /* Get endpoints */
 507         for (i = 0; i < interface->num_altsetting; i++) {
 508                 int ep;
 509
 510                 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
 511                         struct usb_host_endpoint        *e;
 512                         int dir_out;
 513
 514                         e = &interface->altsetting[i].endpoint[ep];
 515
 516                         dir_out = ((e->desc.bEndpointAddress &
 517                                         USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
 518
 519                         printk("tm6000: alt %d, interface %i, class %i\n",
 520                                i,
 521                                interface->altsetting[i].desc.bInterfaceNumber,
 522                                interface->altsetting[i].desc.bInterfaceClass);
 523
 524                         switch (e->desc.bmAttributes) {
 525                         case USB_ENDPOINT_XFER_BULK:
 526                                 if (!dir_out) {
 527                                         get_max_endpoint (usbdev, "Bulk IN", e,
 528                                                         &dev->max_bulk_in,
 529                                                         &dev->bulk_in);
 530                                 } else {
 531                                         get_max_endpoint (usbdev, "Bulk OUT", e,
 532                                                         &dev->max_bulk_out,
 533                                                         &dev->bulk_out);
 534                                 }
 535                                 break;
 536                         case USB_ENDPOINT_XFER_ISOC:
 537                                 if (!dir_out) {
 538                                         get_max_endpoint (usbdev, "ISOC IN", e,
 539                                                         &dev->max_isoc_in,
 540                                                         &dev->isoc_in);
 541                                 } else {
 542                                         get_max_endpoint (usbdev, "ISOC OUT", e,
 543                                                         &dev->max_isoc_out,
 544                                                         &dev->isoc_out);
 545                                 }
 546                                 break;
 547                         }
 548                 }
 549         }
 550
 551
 552         printk("tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n",
 553                 speed,
 554                 le16_to_cpu(dev->udev->descriptor.idVendor),
 555                 le16_to_cpu(dev->udev->descriptor.idProduct),
 556                 interface->altsetting->desc.bInterfaceNumber);
 557
 558 /* check if the the device has the iso in endpoint at the correct place */
 559         if (!dev->isoc_in) {
 560                 printk("tm6000: probing error: no IN ISOC endpoint!\n");
 561                 rc= -ENODEV;
 562
 563                 goto err;
 564         }
 565
 566         /* save our data pointer in this interface device */
 567         usb_set_intfdata(interface, dev);
 568
 569         printk("tm6000: Found %s\n", tm6000_boards[dev->model].name);
 570
 571         rc=tm6000_init_dev(dev);
 572
 573         if (rc<0)
 574                 goto err;
 575
 576         return 0;
 577
 578 err:
 579         printk("tm6000: Error %d while registering\n", rc);
 580
 581         tm6000_devused&=~(1<<nr);
 582         usb_put_dev(usbdev);
 583
 584         kfree(dev);
 585         return rc;
 586 }
 587
 588 /*
 589  * tm6000_usb_disconnect()
 590  * called when the device gets diconencted
 591  * video device will be unregistered on v4l2_close in case it is still open
 592  */
 593 static void tm6000_usb_disconnect(struct usb_interface *interface)
 594 {
 595         struct tm6000_core *dev = usb_get_intfdata(interface);
 596         usb_set_intfdata(interface, NULL);
 597
 598         if (!dev)
 599                 return;
 600
 601         printk("tm6000: disconnecting %s\n", dev->name);
 602
 603         mutex_lock(&dev->lock);
 604
 605 #ifdef CONFIG_VIDEO_TM6000_DVB
 606         if(dev->dvb) {
 607                 tm6000_dvb_unregister(dev);
 608                 kfree(dev->dvb);
 609         }
 610 #endif
 611
 612         tm6000_v4l2_unregister(dev);
 613
 614         tm6000_i2c_unregister(dev);
 615
 616         v4l2_device_unregister(&dev->v4l2_dev);
 617
 618 //      wake_up_interruptible_all(&dev->open);
 619
 620         dev->state |= DEV_DISCONNECTED;
 621
 622         usb_put_dev(dev->udev);
 623
 624         mutex_unlock(&dev->lock);
 625         kfree(dev);
 626 }
 627
 628 static struct usb_driver tm6000_usb_driver = {
 629                 .name = "tm6000",
 630                 .probe = tm6000_usb_probe,
 631                 .disconnect = tm6000_usb_disconnect,
 632                 .id_table = tm6000_id_table,
 633 };
 634
 635 static int __init tm6000_module_init(void)
 636 {
 637         int result;
 638
 639         printk(KERN_INFO "tm6000" " v4l2 driver version %d.%d.%d loaded\n",
 640                (TM6000_VERSION  >> 16) & 0xff,
 641                (TM6000_VERSION  >> 8) & 0xff, TM6000_VERSION  & 0xff);
 642
 643         /* register this driver with the USB subsystem */
 644         result = usb_register(&tm6000_usb_driver);
 645         if (result)
 646                 printk("tm6000"
 647                            " usb_register failed. Error number %d.\n", result);
 648
 649         return result;
 650 }
 651
 652 static void __exit tm6000_module_exit(void)
 653 {
 654         /* deregister at USB subsystem */
 655         usb_deregister(&tm6000_usb_driver);
 656 }
 657
 658 module_init(tm6000_module_init);
 659 module_exit(tm6000_module_exit);
 660
 661 MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000 USB2 adapter");
 662 MODULE_AUTHOR("Mauro Carvalho Chehab");
 663 MODULE_LICENSE("GPL");