3 * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
5 * Copyright © 2005 Agere Systems Inc.
9 *------------------------------------------------------------------------------
11 * et131x_netdev.c - Routines and data required by all Linux network devices.
13 *------------------------------------------------------------------------------
17 * This software is provided subject to the following terms and conditions,
18 * which you should read carefully before using the software. Using this
19 * software indicates your acceptance of these terms and conditions. If you do
20 * not agree with these terms and conditions, do not use the software.
22 * Copyright © 2005 Agere Systems Inc.
23 * All rights reserved.
25 * Redistribution and use in source or binary forms, with or without
26 * modifications, are permitted provided that the following conditions are met:
28 * . Redistributions of source code must retain the above copyright notice, this
29 * list of conditions and the following Disclaimer as comments in the code as
30 * well as in the documentation and/or other materials provided with the
33 * . Redistributions in binary form must reproduce the above copyright notice,
34 * this list of conditions and the following Disclaimer in the documentation
35 * and/or other materials provided with the distribution.
37 * . Neither the name of Agere Systems Inc. nor the names of the contributors
38 * may be used to endorse or promote products derived from this software
39 * without specific prior written permission.
43 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
44 * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
45 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
46 * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
47 * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
48 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
49 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
50 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
51 * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
52 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
53 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
58 #include "et131x_version.h"
59 #include "et131x_defs.h"
61 #include <linux/init.h>
62 #include <linux/module.h>
63 #include <linux/types.h>
64 #include <linux/kernel.h>
66 #include <linux/sched.h>
67 #include <linux/ptrace.h>
68 #include <linux/ctype.h>
69 #include <linux/string.h>
70 #include <linux/timer.h>
71 #include <linux/interrupt.h>
73 #include <linux/delay.h>
75 #include <linux/bitops.h>
76 #include <linux/pci.h>
77 #include <asm/system.h>
79 #include <linux/mii.h>
80 #include <linux/netdevice.h>
81 #include <linux/etherdevice.h>
82 #include <linux/skbuff.h>
83 #include <linux/if_arp.h>
84 #include <linux/ioport.h>
86 #include "et1310_phy.h"
87 #include "et1310_tx.h"
88 #include "et131x_adapter.h"
91 struct net_device_stats *et131x_stats(struct net_device *netdev);
92 int et131x_open(struct net_device *netdev);
93 int et131x_close(struct net_device *netdev);
94 int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, int cmd);
95 void et131x_multicast(struct net_device *netdev);
96 int et131x_tx(struct sk_buff *skb, struct net_device *netdev);
97 void et131x_tx_timeout(struct net_device *netdev);
98 int et131x_change_mtu(struct net_device *netdev, int new_mtu);
99 int et131x_set_mac_addr(struct net_device *netdev, void *new_mac);
100 void et131x_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
101 void et131x_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
103 static const struct net_device_ops et131x_netdev_ops = {
104 .ndo_open = et131x_open,
105 .ndo_stop = et131x_close,
106 .ndo_start_xmit = et131x_tx,
107 .ndo_set_multicast_list = et131x_multicast,
108 .ndo_tx_timeout = et131x_tx_timeout,
109 .ndo_change_mtu = et131x_change_mtu,
110 .ndo_set_mac_address = et131x_set_mac_addr,
111 .ndo_validate_addr = eth_validate_addr,
112 .ndo_get_stats = et131x_stats,
113 .ndo_do_ioctl = et131x_ioctl,
117 * et131x_device_alloc
119 * Returns pointer to the allocated and initialized net_device struct for
122 * Create instances of net_device and wl_private for the new adapter and
123 * register the device's entry points in the net_device structure.
125 struct net_device *et131x_device_alloc(void)
127 struct net_device *netdev;
129 /* Alloc net_device and adapter structs */
130 netdev = alloc_etherdev(sizeof(struct et131x_adapter));
132 if (netdev == NULL) {
133 printk(KERN_ERR "et131x: Alloc of net_device struct failed\n");
137 /* Setup the function registration table (and other data) for a
140 /* netdev->init = &et131x_init; */
141 /* netdev->set_config = &et131x_config; */
142 netdev->watchdog_timeo = ET131X_TX_TIMEOUT;
143 netdev->netdev_ops = &et131x_netdev_ops;
145 /* netdev->ethtool_ops = &et131x_ethtool_ops; */
148 /* netdev->poll = &et131x_poll; */
149 /* netdev->poll_controller = &et131x_poll_controller; */
154 * et131x_stats - Return the current device statistics.
155 * @netdev: device whose stats are being queried
157 * Returns 0 on success, errno on failure (as defined in errno.h)
159 struct net_device_stats *et131x_stats(struct net_device *netdev)
161 struct et131x_adapter *adapter = netdev_priv(netdev);
162 struct net_device_stats *stats = &adapter->net_stats;
163 CE_STATS_t *devstat = &adapter->Stats;
165 stats->rx_packets = devstat->ipackets;
166 stats->tx_packets = devstat->opackets;
167 stats->rx_errors = devstat->length_err + devstat->alignment_err +
168 devstat->crc_err + devstat->code_violations + devstat->other_errors;
169 stats->tx_errors = devstat->max_pkt_error;
170 stats->multicast = devstat->multircv;
171 stats->collisions = devstat->collisions;
173 stats->rx_length_errors = devstat->length_err;
174 stats->rx_over_errors = devstat->rx_ov_flow;
175 stats->rx_crc_errors = devstat->crc_err;
177 /* NOTE: These stats don't have corresponding values in CE_STATS,
178 * so we're going to have to update these directly from within the
181 /* stats->rx_bytes = 20; devstat->; */
182 /* stats->tx_bytes = 20; devstat->; */
183 /* stats->rx_dropped = devstat->; */
184 /* stats->tx_dropped = devstat->; */
186 /* NOTE: Not used, can't find analogous statistics */
187 /* stats->rx_frame_errors = devstat->; */
188 /* stats->rx_fifo_errors = devstat->; */
189 /* stats->rx_missed_errors = devstat->; */
191 /* stats->tx_aborted_errors = devstat->; */
192 /* stats->tx_carrier_errors = devstat->; */
193 /* stats->tx_fifo_errors = devstat->; */
194 /* stats->tx_heartbeat_errors = devstat->; */
195 /* stats->tx_window_errors = devstat->; */
200 * et131x_open - Open the device for use.
201 * @netdev: device to be opened
203 * Returns 0 on success, errno on failure (as defined in errno.h)
205 int et131x_open(struct net_device *netdev)
208 struct et131x_adapter *adapter = netdev_priv(netdev);
210 /* Start the timer to track NIC errors */
211 add_timer(&adapter->ErrorTimer);
213 /* Register our IRQ */
214 result = request_irq(netdev->irq, et131x_isr, IRQF_SHARED,
215 netdev->name, netdev);
217 dev_err(&adapter->pdev->dev, "c ould not register IRQ %d\n",
222 /* Enable the Tx and Rx DMA engines (if not already enabled) */
223 et131x_rx_dma_enable(adapter);
224 et131x_tx_dma_enable(adapter);
226 /* Enable device interrupts */
227 et131x_enable_interrupts(adapter);
229 adapter->Flags |= fMP_ADAPTER_INTERRUPT_IN_USE;
231 /* We're ready to move some data, so start the queue */
232 netif_start_queue(netdev);
237 * et131x_close - Close the device
238 * @netdev: device to be closed
240 * Returns 0 on success, errno on failure (as defined in errno.h)
242 int et131x_close(struct net_device *netdev)
244 struct et131x_adapter *adapter = netdev_priv(netdev);
246 /* First thing is to stop the queue */
247 netif_stop_queue(netdev);
249 /* Stop the Tx and Rx DMA engines */
250 et131x_rx_dma_disable(adapter);
251 et131x_tx_dma_disable(adapter);
253 /* Disable device interrupts */
254 et131x_disable_interrupts(adapter);
256 /* Deregistering ISR */
257 adapter->Flags &= ~fMP_ADAPTER_INTERRUPT_IN_USE;
258 free_irq(netdev->irq, netdev);
260 /* Stop the error timer */
261 del_timer_sync(&adapter->ErrorTimer);
266 * et131x_ioctl_mii - The function which handles MII IOCTLs
267 * @netdev: device on which the query is being made
268 * @reqbuf: the request-specific data buffer
269 * @cmd: the command request code
271 * Returns 0 on success, errno on failure (as defined in errno.h)
273 int et131x_ioctl_mii(struct net_device *netdev, struct ifreq *reqbuf, int cmd)
276 struct et131x_adapter *etdev = netdev_priv(netdev);
277 struct mii_ioctl_data *data = if_mii(reqbuf);
281 data->phy_id = etdev->Stats.xcvr_addr;
285 if (!capable(CAP_NET_ADMIN))
288 status = MiRead(etdev,
289 data->reg_num, &data->val_out);
293 if (!capable(CAP_NET_ADMIN))
296 status = MiWrite(etdev, data->reg_num,
301 status = -EOPNOTSUPP;
307 * et131x_ioctl - The I/O Control handler for the driver
308 * @netdev: device on which the control request is being made
309 * @reqbuf: a pointer to the IOCTL request buffer
310 * @cmd: the IOCTL command code
312 * Returns 0 on success, errno on failure (as defined in errno.h)
314 int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf, int cmd)
322 status = et131x_ioctl_mii(netdev, reqbuf, cmd);
326 status = -EOPNOTSUPP;
332 * et131x_set_packet_filter - Configures the Rx Packet filtering on the device
333 * @adapter: pointer to our private adapter structure
335 * FIXME: lot of dups with MAC code
337 * Returns 0 on success, errno on failure
339 int et131x_set_packet_filter(struct et131x_adapter *adapter)
342 uint32_t filter = adapter->PacketFilter;
346 ctrl = readl(&adapter->regs->rxmac.ctrl);
347 pf_ctrl = readl(&adapter->regs->rxmac.pf_ctrl);
349 /* Default to disabled packet filtering. Enable it in the individual
350 * case statements that require the device to filter something
354 /* Set us to be in promiscuous mode so we receive everything, this
355 * is also true when we get a packet filter of 0
357 if ((filter & ET131X_PACKET_TYPE_PROMISCUOUS) || filter == 0)
358 pf_ctrl &= ~7; /* Clear filter bits */
361 * Set us up with Multicast packet filtering. Three cases are
362 * possible - (1) we have a multi-cast list, (2) we receive ALL
363 * multicast entries or (3) we receive none.
365 if (filter & ET131X_PACKET_TYPE_ALL_MULTICAST)
366 pf_ctrl &= ~2; /* Multicast filter bit */
368 SetupDeviceForMulticast(adapter);
373 /* Set us up with Unicast packet filtering */
374 if (filter & ET131X_PACKET_TYPE_DIRECTED) {
375 SetupDeviceForUnicast(adapter);
380 /* Set us up with Broadcast packet filtering */
381 if (filter & ET131X_PACKET_TYPE_BROADCAST) {
382 pf_ctrl |= 1; /* Broadcast filter bit */
387 /* Setup the receive mac configuration registers - Packet
388 * Filter control + the enable / disable for packet filter
389 * in the control reg.
391 writel(pf_ctrl, &adapter->regs->rxmac.pf_ctrl);
392 writel(ctrl, &adapter->regs->rxmac.ctrl);
398 * et131x_multicast - The handler to configure multicasting on the interface
399 * @netdev: a pointer to a net_device struct representing the device
401 void et131x_multicast(struct net_device *netdev)
403 struct et131x_adapter *adapter = netdev_priv(netdev);
404 uint32_t PacketFilter = 0;
406 struct netdev_hw_addr *ha;
409 spin_lock_irqsave(&adapter->Lock, flags);
411 /* Before we modify the platform-independent filter flags, store them
412 * locally. This allows us to determine if anything's changed and if
413 * we even need to bother the hardware
415 PacketFilter = adapter->PacketFilter;
417 /* Clear the 'multicast' flag locally; because we only have a single
418 * flag to check multicast, and multiple multicast addresses can be
419 * set, this is the easiest way to determine if more than one
420 * multicast address is being set.
422 PacketFilter &= ~ET131X_PACKET_TYPE_MULTICAST;
424 /* Check the net_device flags and set the device independent flags
428 if (netdev->flags & IFF_PROMISC)
429 adapter->PacketFilter |= ET131X_PACKET_TYPE_PROMISCUOUS;
431 adapter->PacketFilter &= ~ET131X_PACKET_TYPE_PROMISCUOUS;
433 if (netdev->flags & IFF_ALLMULTI)
434 adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST;
436 if (netdev_mc_count(netdev) > NIC_MAX_MCAST_LIST)
437 adapter->PacketFilter |= ET131X_PACKET_TYPE_ALL_MULTICAST;
439 if (netdev_mc_count(netdev) < 1) {
440 adapter->PacketFilter &= ~ET131X_PACKET_TYPE_ALL_MULTICAST;
441 adapter->PacketFilter &= ~ET131X_PACKET_TYPE_MULTICAST;
443 adapter->PacketFilter |= ET131X_PACKET_TYPE_MULTICAST;
445 /* Set values in the private adapter struct */
447 netdev_for_each_mc_addr(ha, netdev) {
448 if (i == NIC_MAX_MCAST_LIST)
450 memcpy(adapter->MCList[i++], ha->addr, ETH_ALEN);
452 adapter->MCAddressCount = i;
454 /* Are the new flags different from the previous ones? If not, then no
457 * NOTE - This block will always update the MCList with the hardware,
458 * even if the addresses aren't the same.
460 if (PacketFilter != adapter->PacketFilter) {
461 /* Call the device's filter function */
462 et131x_set_packet_filter(adapter);
464 spin_unlock_irqrestore(&adapter->Lock, flags);
468 * et131x_tx - The handler to tx a packet on the device
469 * @skb: data to be Tx'd
470 * @netdev: device on which data is to be Tx'd
472 * Returns 0 on success, errno on failure (as defined in errno.h)
474 int et131x_tx(struct sk_buff *skb, struct net_device *netdev)
478 /* Save the timestamp for the TX timeout watchdog */
479 netdev->trans_start = jiffies;
481 /* Call the device-specific data Tx routine */
482 status = et131x_send_packets(skb, netdev);
484 /* Check status and manage the netif queue if necessary */
486 if (status == -ENOMEM) {
487 /* Put the queue to sleep until resources are
490 netif_stop_queue(netdev);
491 status = NETDEV_TX_BUSY;
493 status = NETDEV_TX_OK;
500 * et131x_tx_timeout - Timeout handler
501 * @netdev: a pointer to a net_device struct representing the device
503 * The handler called when a Tx request times out. The timeout period is
504 * specified by the 'tx_timeo" element in the net_device structure (see
505 * et131x_alloc_device() to see how this value is set).
507 void et131x_tx_timeout(struct net_device *netdev)
509 struct et131x_adapter *etdev = netdev_priv(netdev);
513 /* Just skip this part if the adapter is doing link detection */
514 if (etdev->Flags & fMP_ADAPTER_LINK_DETECTION)
517 /* Any nonrecoverable hardware error?
518 * Checks adapter->flags for any failure in phy reading
520 if (etdev->Flags & fMP_ADAPTER_NON_RECOVER_ERROR)
523 /* Hardware failure? */
524 if (etdev->Flags & fMP_ADAPTER_HARDWARE_ERROR) {
525 dev_err(&etdev->pdev->dev, "hardware error - reset\n");
530 spin_lock_irqsave(&etdev->TCBSendQLock, flags);
532 tcb = etdev->tx_ring.send_head;
537 if (tcb->count > NIC_SEND_HANG_THRESHOLD) {
538 spin_unlock_irqrestore(&etdev->TCBSendQLock,
541 dev_warn(&etdev->pdev->dev,
542 "Send stuck - reset. tcb->WrIndex %x, Flags 0x%08x\n",
546 et131x_close(netdev);
553 spin_unlock_irqrestore(&etdev->TCBSendQLock, flags);
557 * et131x_change_mtu - The handler called to change the MTU for the device
558 * @netdev: device whose MTU is to be changed
559 * @new_mtu: the desired MTU
561 * Returns 0 on success, errno on failure (as defined in errno.h)
563 int et131x_change_mtu(struct net_device *netdev, int new_mtu)
566 struct et131x_adapter *adapter = netdev_priv(netdev);
568 /* Make sure the requested MTU is valid */
569 if (new_mtu < 64 || new_mtu > 9216)
572 /* Stop the netif queue */
573 netif_stop_queue(netdev);
575 /* Stop the Tx and Rx DMA engines */
576 et131x_rx_dma_disable(adapter);
577 et131x_tx_dma_disable(adapter);
579 /* Disable device interrupts */
580 et131x_disable_interrupts(adapter);
581 et131x_handle_send_interrupt(adapter);
582 et131x_handle_recv_interrupt(adapter);
584 /* Set the new MTU */
585 netdev->mtu = new_mtu;
587 /* Free Rx DMA memory */
588 et131x_adapter_memory_free(adapter);
590 /* Set the config parameter for Jumbo Packet support */
591 adapter->RegistryJumboPacket = new_mtu + 14;
592 et131x_soft_reset(adapter);
594 /* Alloc and init Rx DMA memory */
595 result = et131x_adapter_memory_alloc(adapter);
597 dev_warn(&adapter->pdev->dev,
598 "Change MTU failed; couldn't re-alloc DMA memory\n");
602 et131x_init_send(adapter);
604 et131x_hwaddr_init(adapter);
605 memcpy(netdev->dev_addr, adapter->addr, ETH_ALEN);
607 /* Init the device with the new settings */
608 et131x_adapter_setup(adapter);
610 /* Enable interrupts */
611 if (adapter->Flags & fMP_ADAPTER_INTERRUPT_IN_USE)
612 et131x_enable_interrupts(adapter);
614 /* Restart the Tx and Rx DMA engines */
615 et131x_rx_dma_enable(adapter);
616 et131x_tx_dma_enable(adapter);
618 /* Restart the netif queue */
619 netif_wake_queue(netdev);
624 * et131x_set_mac_addr - handler to change the MAC address for the device
625 * @netdev: device whose MAC is to be changed
626 * @new_mac: the desired MAC address
628 * Returns 0 on success, errno on failure (as defined in errno.h)
630 * IMPLEMENTED BY : blux http://berndlux.de 22.01.2007 21:14
632 int et131x_set_mac_addr(struct net_device *netdev, void *new_mac)
635 struct et131x_adapter *adapter = netdev_priv(netdev);
636 struct sockaddr *address = new_mac;
643 /* Make sure the requested MAC is valid */
644 if (!is_valid_ether_addr(address->sa_data))
647 /* Stop the netif queue */
648 netif_stop_queue(netdev);
650 /* Stop the Tx and Rx DMA engines */
651 et131x_rx_dma_disable(adapter);
652 et131x_tx_dma_disable(adapter);
654 /* Disable device interrupts */
655 et131x_disable_interrupts(adapter);
656 et131x_handle_send_interrupt(adapter);
657 et131x_handle_recv_interrupt(adapter);
659 /* Set the new MAC */
660 /* netdev->set_mac_address = &new_mac; */
661 /* netdev->mtu = new_mtu; */
663 memcpy(netdev->dev_addr, address->sa_data, netdev->addr_len);
665 printk(KERN_INFO "%s: Setting MAC address to %pM\n",
666 netdev->name, netdev->dev_addr);
668 /* Free Rx DMA memory */
669 et131x_adapter_memory_free(adapter);
671 /* Set the config parameter for Jumbo Packet support */
672 /* adapter->RegistryJumboPacket = new_mtu + 14; */
673 /* blux: not needet here, we'll change the MAC */
675 et131x_soft_reset(adapter);
677 /* Alloc and init Rx DMA memory */
678 result = et131x_adapter_memory_alloc(adapter);
680 dev_err(&adapter->pdev->dev,
681 "Change MAC failed; couldn't re-alloc DMA memory\n");
685 et131x_init_send(adapter);
687 et131x_hwaddr_init(adapter);
689 /* Init the device with the new settings */
690 et131x_adapter_setup(adapter);
692 /* Enable interrupts */
693 if (adapter->Flags & fMP_ADAPTER_INTERRUPT_IN_USE)
694 et131x_enable_interrupts(adapter);
696 /* Restart the Tx and Rx DMA engines */
697 et131x_rx_dma_enable(adapter);
698 et131x_tx_dma_enable(adapter);
700 /* Restart the netif queue */
701 netif_wake_queue(netdev);