3 * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs
5 * Copyright © 2005 Agere Systems Inc.
9 * Copyright (c) 2011 Mark Einon <mark.einon@gmail.com>
11 *------------------------------------------------------------------------------
15 * This software is provided subject to the following terms and conditions,
16 * which you should read carefully before using the software. Using this
17 * software indicates your acceptance of these terms and conditions. If you do
18 * not agree with these terms and conditions, do not use the software.
20 * Copyright © 2005 Agere Systems Inc.
21 * All rights reserved.
23 * Redistribution and use in source or binary forms, with or without
24 * modifications, are permitted provided that the following conditions are met:
26 * . Redistributions of source code must retain the above copyright notice, this
27 * list of conditions and the following Disclaimer as comments in the code as
28 * well as in the documentation and/or other materials provided with the
31 * . Redistributions in binary form must reproduce the above copyright notice,
32 * this list of conditions and the following Disclaimer in the documentation
33 * and/or other materials provided with the distribution.
35 * . Neither the name of Agere Systems Inc. nor the names of the contributors
36 * may be used to endorse or promote products derived from this software
37 * without specific prior written permission.
41 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
42 * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
43 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
44 * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
45 * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
46 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
47 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
48 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
49 * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
50 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
51 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
56 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
58 #include <linux/pci.h>
59 #include <linux/init.h>
60 #include <linux/module.h>
61 #include <linux/types.h>
62 #include <linux/kernel.h>
64 #include <linux/sched.h>
65 #include <linux/ptrace.h>
66 #include <linux/slab.h>
67 #include <linux/ctype.h>
68 #include <linux/string.h>
69 #include <linux/timer.h>
70 #include <linux/interrupt.h>
72 #include <linux/delay.h>
73 #include <linux/bitops.h>
76 #include <linux/netdevice.h>
77 #include <linux/etherdevice.h>
78 #include <linux/skbuff.h>
79 #include <linux/if_arp.h>
80 #include <linux/ioport.h>
81 #include <linux/crc32.h>
82 #include <linux/random.h>
83 #include <linux/phy.h>
87 MODULE_AUTHOR("Victor Soriano <vjsoriano@agere.com>");
88 MODULE_AUTHOR("Mark Einon <mark.einon@gmail.com>");
89 MODULE_LICENSE("Dual BSD/GPL");
90 MODULE_DESCRIPTION("10/100/1000 Base-T Ethernet Driver for the ET1310 by Agere Systems");
93 #define MAX_NUM_REGISTER_POLLS 1000
94 #define MAX_NUM_WRITE_RETRIES 2
97 #define COUNTER_WRAP_16_BIT 0x10000
98 #define COUNTER_WRAP_12_BIT 0x1000
101 #define INTERNAL_MEM_SIZE 0x400 /* 1024 of internal memory */
102 #define INTERNAL_MEM_RX_OFFSET 0x1FF /* 50% Tx, 50% Rx */
106 * For interrupts, normal running is:
107 * rxdma_xfr_done, phy_interrupt, mac_stat_interrupt,
108 * watchdog_interrupt & txdma_xfer_done
110 * In both cases, when flow control is enabled for either Tx or bi-direction,
111 * we additional enable rx_fbr0_low and rx_fbr1_low, so we know when the
112 * buffer rings are running low.
114 #define INT_MASK_DISABLE 0xffffffff
116 /* NOTE: Masking out MAC_STAT Interrupt for now...
117 * #define INT_MASK_ENABLE 0xfff6bf17
118 * #define INT_MASK_ENABLE_NO_FLOW 0xfff6bfd7
120 #define INT_MASK_ENABLE 0xfffebf17
121 #define INT_MASK_ENABLE_NO_FLOW 0xfffebfd7
123 /* General defines */
124 /* Packet and header sizes */
125 #define NIC_MIN_PACKET_SIZE 60
127 /* Multicast list size */
128 #define NIC_MAX_MCAST_LIST 128
130 /* Supported Filters */
131 #define ET131X_PACKET_TYPE_DIRECTED 0x0001
132 #define ET131X_PACKET_TYPE_MULTICAST 0x0002
133 #define ET131X_PACKET_TYPE_BROADCAST 0x0004
134 #define ET131X_PACKET_TYPE_PROMISCUOUS 0x0008
135 #define ET131X_PACKET_TYPE_ALL_MULTICAST 0x0010
138 #define ET131X_TX_TIMEOUT (1 * HZ)
139 #define NIC_SEND_HANG_THRESHOLD 0
142 #define fMP_DEST_MULTI 0x00000001
143 #define fMP_DEST_BROAD 0x00000002
145 /* MP_ADAPTER flags */
146 #define fMP_ADAPTER_RECV_LOOKASIDE 0x00000004
147 #define fMP_ADAPTER_INTERRUPT_IN_USE 0x00000008
149 /* MP_SHARED flags */
150 #define fMP_ADAPTER_LOWER_POWER 0x00200000
152 #define fMP_ADAPTER_NON_RECOVER_ERROR 0x00800000
153 #define fMP_ADAPTER_HARDWARE_ERROR 0x04000000
155 #define fMP_ADAPTER_FAIL_SEND_MASK 0x3ff00000
157 /* Some offsets in PCI config space that are actually used. */
158 #define ET1310_PCI_MAC_ADDRESS 0xA4
159 #define ET1310_PCI_EEPROM_STATUS 0xB2
160 #define ET1310_PCI_ACK_NACK 0xC0
161 #define ET1310_PCI_REPLAY 0xC2
162 #define ET1310_PCI_L0L1LATENCY 0xCF
164 /* PCI Product IDs */
165 #define ET131X_PCI_DEVICE_ID_GIG 0xED00 /* ET1310 1000 Base-T 8 */
166 #define ET131X_PCI_DEVICE_ID_FAST 0xED01 /* ET1310 100 Base-T */
168 /* Define order of magnitude converter */
169 #define NANO_IN_A_MICRO 1000
171 #define PARM_RX_NUM_BUFS_DEF 4
172 #define PARM_RX_TIME_INT_DEF 10
173 #define PARM_RX_MEM_END_DEF 0x2bc
174 #define PARM_TX_TIME_INT_DEF 40
175 #define PARM_TX_NUM_BUFS_DEF 4
176 #define PARM_DMA_CACHE_DEF 0
180 #define FBR_CHUNKS 32
181 #define MAX_DESC_PER_RING_RX 1024
183 /* number of RFDs - default and min */
185 #define RFD_LOW_WATER_MARK 40
186 #define NIC_DEFAULT_NUM_RFD 1024
189 #define RFD_LOW_WATER_MARK 20
190 #define NIC_DEFAULT_NUM_RFD 256
194 #define NIC_MIN_NUM_RFD 64
195 #define NUM_PACKETS_HANDLED 256
197 #define ALCATEL_MULTICAST_PKT 0x01000000
198 #define ALCATEL_BROADCAST_PKT 0x02000000
200 /* typedefs for Free Buffer Descriptors */
204 u32 word2; /* Bits 10-31 reserved, 0-9 descriptor */
207 /* Packet Status Ring Descriptors
211 * top 16 bits are from the Alcatel Status Word as enumerated in
212 * PE-MCXMAC Data Sheet IPD DS54 0210-1 (also IPD-DS80 0205-2)
215 * 1: ipa IP checksum assist
216 * 2: ipp IP checksum pass
217 * 3: tcpa TCP checksum assist
218 * 4: tcpp TCP checksum pass
220 * 6: rxmac_error RXMAC Error Indicator
221 * 7: drop Drop packet
222 * 8: ft Frame Truncated
226 * 16: asw_prev_pkt_dropped e.g. IFG too small on previous
227 * 17: asw_RX_DV_event short receive event detected
228 * 18: asw_false_carrier_event bad carrier since last good packet
229 * 19: asw_code_err one or more nibbles signalled as errors
230 * 20: asw_CRC_err CRC error
231 * 21: asw_len_chk_err frame length field incorrect
232 * 22: asw_too_long frame length > 1518 bytes
233 * 23: asw_OK valid CRC + no code error
234 * 24: asw_multicast has a multicast address
235 * 25: asw_broadcast has a broadcast address
236 * 26: asw_dribble_nibble spurious bits after EOP
237 * 27: asw_control_frame is a control frame
238 * 28: asw_pause_frame is a pause frame
239 * 29: asw_unsupported_op unsupported OP code
240 * 30: asw_VLAN_tag VLAN tag detected
241 * 31: asw_long_evt Rx long event
244 * 0-15: length length in bytes
245 * 16-25: bi Buffer Index
246 * 26-27: ri Ring Index
250 struct pkt_stat_desc {
255 /* Typedefs for the RX DMA status word */
258 * rx status word 0 holds part of the status bits of the Rx DMA engine
259 * that get copied out to memory by the ET-1310. Word 0 is a 32 bit word
260 * which contains the Free Buffer ring 0 and 1 available offset.
262 * bit 0-9 FBR1 offset
263 * bit 10 Wrap flag for FBR1
264 * bit 16-25 FBR0 offset
265 * bit 26 Wrap flag for FBR0
269 * RXSTAT_WORD1_t structure holds part of the status bits of the Rx DMA engine
270 * that get copied out to memory by the ET-1310. Word 3 is a 32 bit word
271 * which contains the Packet Status Ring available offset.
274 * bit 16-27 PSRoffset
280 * struct rx_status_block is a structure representing the status of the Rx
281 * DMA engine it sits in free memory, and is pointed to by 0x101c / 0x1020
283 struct rx_status_block {
289 * Structure for look-up table holding free buffer ring pointers, addresses
293 void *virt[MAX_DESC_PER_RING_RX];
294 void *buffer1[MAX_DESC_PER_RING_RX];
295 void *buffer2[MAX_DESC_PER_RING_RX];
296 u32 bus_high[MAX_DESC_PER_RING_RX];
297 u32 bus_low[MAX_DESC_PER_RING_RX];
299 dma_addr_t ring_physaddr;
300 void *mem_virtaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS];
301 dma_addr_t mem_physaddrs[MAX_DESC_PER_RING_RX / FBR_CHUNKS];
310 * struct rx_ring is the sructure representing the adaptor's local
311 * reference(s) to the rings
313 ******************************************************************************
314 * IMPORTANT NOTE :- fbr_lookup *fbr[NUM_FBRS] uses index 0 to refer to FBR1
315 * and index 1 to refer to FRB0
316 ******************************************************************************
319 struct fbr_lookup *fbr[NUM_FBRS];
320 void *ps_ring_virtaddr;
321 dma_addr_t ps_ring_physaddr;
325 struct rx_status_block *rx_status_block;
326 dma_addr_t rx_status_bus;
329 struct list_head recv_list;
334 bool unfinished_receives;
336 /* lookaside lists */
337 struct kmem_cache *recv_lookaside;
342 * word 2 of the control bits in the Tx Descriptor ring for the ET-1310
344 * 0-15: length of packet
347 * 29-31: VLAN priority
349 * word 3 of the control bits in the Tx Descriptor ring for the ET-1310
351 * 0: last packet in the sequence
352 * 1: first packet in the sequence
353 * 2: interrupt the processor when this pkt sent
354 * 3: Control word - no packet data
355 * 4: Issue half-duplex backpressure : XON/XOFF
356 * 5: send pause frame
357 * 6: Tx frame has error
361 * 10: Packet is a Huge packet
362 * 11: append VLAN tag
363 * 12: IP checksum assist
364 * 13: TCP checksum assist
365 * 14: UDP checksum assist
368 /* struct tx_desc represents each descriptor on the ring */
372 u32 len_vlan; /* control words how to xmit the */
373 u32 flags; /* data (detailed above) */
377 * The status of the Tx DMA engine it sits in free memory, and is pointed to
378 * by 0x101c / 0x1020. This is a DMA10 type
381 /* TCB (Transmit Control Block: Host Side) */
383 struct tcb *next; /* Next entry in ring */
384 u32 flags; /* Our flags for the packet */
385 u32 count; /* Used to spot stuck/lost packets */
386 u32 stale; /* Used to spot stuck/lost packets */
387 struct sk_buff *skb; /* Network skb we are tied to */
388 u32 index; /* Ring indexes */
392 /* Structure representing our local reference(s) to the ring */
394 /* TCB (Transmit Control Block) memory and lists */
395 struct tcb *tcb_ring;
397 /* List of TCBs that are ready to be used */
398 struct tcb *tcb_qhead;
399 struct tcb *tcb_qtail;
401 /* list of TCBs that are currently being sent. NOTE that access to all
402 * three of these (including used) are controlled via the
403 * TCBSendQLock. This lock should be secured prior to incementing /
404 * decrementing used, or any queue manipulation on send_head /
407 struct tcb *send_head;
408 struct tcb *send_tail;
411 /* The actual descriptor ring */
412 struct tx_desc *tx_desc_ring;
413 dma_addr_t tx_desc_ring_pa;
415 /* send_idx indicates where we last wrote to in the descriptor ring. */
418 /* The location of the write-back status block */
420 dma_addr_t tx_status_pa;
422 /* Packets since the last IRQ: used for interrupt coalescing */
427 * Do not change these values: if changed, then change also in respective
428 * TXdma and Rxdma engines
430 #define NUM_DESC_PER_RING_TX 512 /* TX Do not change these values */
434 * These values are all superseded by registry entries to facilitate tuning.
435 * Once the desired performance has been achieved, the optimal registry values
436 * should be re-populated to these #defines:
438 #define TX_ERROR_PERIOD 1000
440 #define LO_MARK_PERCENT_FOR_PSR 15
441 #define LO_MARK_PERCENT_FOR_RX 15
443 /* RFD (Receive Frame Descriptor) */
445 struct list_head list_node;
447 u32 len; /* total size of receive frame */
454 #define FLOW_TXONLY 1
455 #define FLOW_RXONLY 2
458 /* Struct to define some device statistics */
462 * NOTE: atomic_t types are only guaranteed to store 24-bits; if we
463 * MUST have 32, then we'll need another way to perform atomic
466 u32 unicast_pkts_rcvd;
467 atomic_t unicast_pkts_xmtd;
468 u32 multicast_pkts_rcvd;
469 atomic_t multicast_pkts_xmtd;
470 u32 broadcast_pkts_rcvd;
471 atomic_t broadcast_pkts_xmtd;
472 u32 rcvd_pkts_dropped;
478 u32 tx_excessive_collisions;
479 u32 tx_first_collisions;
480 u32 tx_late_collisions;
490 u32 rx_code_violations;
493 u32 synchronous_iterations;
494 u32 interrupt_status;
497 /* The private adapter structure */
498 struct et131x_adapter {
499 struct net_device *netdev;
500 struct pci_dev *pdev;
501 struct mii_bus *mii_bus;
502 struct phy_device *phydev;
503 struct work_struct task;
505 /* Flags that indicate current state of the adapter */
508 /* local link state, to determine if a state change has occurred */
512 u8 rom_addr[ETH_ALEN];
520 spinlock_t tcb_send_qlock;
521 spinlock_t tcb_ready_qlock;
522 spinlock_t send_hw_lock;
525 spinlock_t rcv_pend_lock;
530 /* Packet Filter and look ahead size */
534 u32 multicast_addr_count;
535 u8 multicast_list[NIC_MAX_MCAST_LIST][ETH_ALEN];
537 /* Pointer to the device's PCI register space */
538 struct address_map __iomem *regs;
540 /* Registry parameters */
541 u8 wanted_flow; /* Flow we want for 802.3x flow control */
542 u32 registry_jumbo_packet; /* Max supported ethernet packet size */
544 /* Derived from the registry: */
545 u8 flowcontrol; /* flow control validated by the far-end */
547 /* Minimize init-time */
548 struct timer_list error_timer;
550 /* variable putting the phy into coma mode when boot up with no cable
551 * plugged in after 5 seconds
555 /* Next two used to save power information at power down. This
556 * information will be used during power up to set up parts of Power
557 * Management in JAGCore
562 /* Tx Memory Variables */
563 struct tx_ring tx_ring;
565 /* Rx Memory Variables */
566 struct rx_ring rx_ring;
569 struct ce_stats stats;
571 struct net_device_stats net_stats;
574 static int eeprom_wait_ready(struct pci_dev *pdev, u32 *status)
580 * 1. Check LBCIF Status Register for bits 6 & 3:2 all equal to 0 and
581 * bits 7,1:0 both equal to 1, at least once after reset.
582 * Subsequent operations need only to check that bits 1:0 are equal
583 * to 1 prior to starting a single byte read/write
586 for (i = 0; i < MAX_NUM_REGISTER_POLLS; i++) {
587 /* Read registers grouped in DWORD1 */
588 if (pci_read_config_dword(pdev, LBCIF_DWORD1_GROUP, ®))
591 /* I2C idle and Phy Queue Avail both true */
592 if ((reg & 0x3000) == 0x3000) {
603 * eeprom_write - Write a byte to the ET1310's EEPROM
604 * @adapter: pointer to our private adapter structure
605 * @addr: the address to write
606 * @data: the value to write
608 * Returns 1 for a successful write.
610 static int eeprom_write(struct et131x_adapter *adapter, u32 addr, u8 data)
612 struct pci_dev *pdev = adapter->pdev;
622 * For an EEPROM, an I2C single byte write is defined as a START
623 * condition followed by the device address, EEPROM address, one byte
624 * of data and a STOP condition. The STOP condition will trigger the
625 * EEPROM's internally timed write cycle to the nonvolatile memory.
626 * All inputs are disabled during this write cycle and the EEPROM will
627 * not respond to any access until the internal write is complete.
630 err = eeprom_wait_ready(pdev, NULL);
635 * 2. Write to the LBCIF Control Register: bit 7=1, bit 6=1, bit 3=0,
636 * and bits 1:0 both =0. Bit 5 should be set according to the
637 * type of EEPROM being accessed (1=two byte addressing, 0=one
640 if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER,
641 LBCIF_CONTROL_LBCIF_ENABLE | LBCIF_CONTROL_I2C_WRITE))
646 /* Prepare EEPROM address for Step 3 */
648 for (retries = 0; retries < MAX_NUM_WRITE_RETRIES; retries++) {
649 /* Write the address to the LBCIF Address Register */
650 if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER, addr))
653 * Write the data to the LBCIF Data Register (the I2C write
656 if (pci_write_config_byte(pdev, LBCIF_DATA_REGISTER, data))
659 * Monitor bit 1:0 of the LBCIF Status Register. When bits
660 * 1:0 are both equal to 1, the I2C write has completed and the
661 * internal write cycle of the EEPROM is about to start.
662 * (bits 1:0 = 01 is a legal state while waiting from both
663 * equal to 1, but bits 1:0 = 10 is invalid and implies that
664 * something is broken).
666 err = eeprom_wait_ready(pdev, &status);
671 * Check bit 3 of the LBCIF Status Register. If equal to 1,
672 * an error has occurred.Don't break here if we are revision
673 * 1, this is so we do a blind write for load bug.
675 if ((status & LBCIF_STATUS_GENERAL_ERROR)
676 && adapter->pdev->revision == 0)
680 * Check bit 2 of the LBCIF Status Register. If equal to 1 an
681 * ACK error has occurred on the address phase of the write.
682 * This could be due to an actual hardware failure or the
683 * EEPROM may still be in its internal write cycle from a
684 * previous write. This write operation was ignored and must be
687 if (status & LBCIF_STATUS_ACK_ERROR) {
689 * This could be due to an actual hardware failure
690 * or the EEPROM may still be in its internal write
691 * cycle from a previous write. This write operation
692 * was ignored and must be repeated later.
703 * Set bit 6 of the LBCIF Control Register = 0.
708 if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER,
709 LBCIF_CONTROL_LBCIF_ENABLE))
712 /* Do read until internal ACK_ERROR goes away meaning write
716 pci_write_config_dword(pdev,
717 LBCIF_ADDRESS_REGISTER,
720 pci_read_config_dword(pdev,
721 LBCIF_DATA_REGISTER, &val);
722 } while ((val & 0x00010000) == 0);
723 } while (val & 0x00040000);
725 if ((val & 0xFF00) != 0xC000 || index == 10000)
729 return writeok ? 0 : -EIO;
733 * eeprom_read - Read a byte from the ET1310's EEPROM
734 * @adapter: pointer to our private adapter structure
735 * @addr: the address from which to read
736 * @pdata: a pointer to a byte in which to store the value of the read
737 * @eeprom_id: the ID of the EEPROM
738 * @addrmode: how the EEPROM is to be accessed
740 * Returns 1 for a successful read
742 static int eeprom_read(struct et131x_adapter *adapter, u32 addr, u8 *pdata)
744 struct pci_dev *pdev = adapter->pdev;
749 * A single byte read is similar to the single byte write, with the
750 * exception of the data flow:
753 err = eeprom_wait_ready(pdev, NULL);
757 * Write to the LBCIF Control Register: bit 7=1, bit 6=0, bit 3=0,
758 * and bits 1:0 both =0. Bit 5 should be set according to the type
759 * of EEPROM being accessed (1=two byte addressing, 0=one byte
762 if (pci_write_config_byte(pdev, LBCIF_CONTROL_REGISTER,
763 LBCIF_CONTROL_LBCIF_ENABLE))
766 * Write the address to the LBCIF Address Register (I2C read will
769 if (pci_write_config_dword(pdev, LBCIF_ADDRESS_REGISTER, addr))
772 * Monitor bit 0 of the LBCIF Status Register. When = 1, I2C read
773 * is complete. (if bit 1 =1 and bit 0 stays = 0, a hardware failure
776 err = eeprom_wait_ready(pdev, &status);
780 * Regardless of error status, read data byte from LBCIF Data
785 * Check bit 2 of the LBCIF Status Register. If = 1,
786 * then an error has occurred.
788 return (status & LBCIF_STATUS_ACK_ERROR) ? -EIO : 0;
791 static int et131x_init_eeprom(struct et131x_adapter *adapter)
793 struct pci_dev *pdev = adapter->pdev;
796 /* We first need to check the EEPROM Status code located at offset
797 * 0xB2 of config space
799 pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS,
802 /* THIS IS A WORKAROUND:
803 * I need to call this function twice to get my card in a
804 * LG M1 Express Dual running. I tried also a msleep before this
805 * function, because I thought there could be some time condidions
806 * but it didn't work. Call the whole function twice also work.
808 if (pci_read_config_byte(pdev, ET1310_PCI_EEPROM_STATUS, &eestatus)) {
810 "Could not read PCI config space for EEPROM Status\n");
814 /* Determine if the error(s) we care about are present. If they are
815 * present we need to fail.
817 if (eestatus & 0x4C) {
818 int write_failed = 0;
819 if (pdev->revision == 0x01) {
821 static const u8 eedata[4] = { 0xFE, 0x13, 0x10, 0xFF };
823 /* Re-write the first 4 bytes if we have an eeprom
824 * present and the revision id is 1, this fixes the
825 * corruption seen with 1310 B Silicon
827 for (i = 0; i < 3; i++)
828 if (eeprom_write(adapter, i, eedata[i]) < 0)
831 if (pdev->revision != 0x01 || write_failed) {
833 "Fatal EEPROM Status Error - 0x%04x\n", eestatus);
835 /* This error could mean that there was an error
836 * reading the eeprom or that the eeprom doesn't exist.
837 * We will treat each case the same and not try to
838 * gather additional information that normally would
839 * come from the eeprom, like MAC Address
841 adapter->has_eeprom = 0;
845 adapter->has_eeprom = 1;
847 /* Read the EEPROM for information regarding LED behavior. Refer to
848 * ET1310_phy.c, et131x_xcvr_init(), for its use.
850 eeprom_read(adapter, 0x70, &adapter->eeprom_data[0]);
851 eeprom_read(adapter, 0x71, &adapter->eeprom_data[1]);
853 if (adapter->eeprom_data[0] != 0xcd)
854 /* Disable all optional features */
855 adapter->eeprom_data[1] = 0x00;
861 * et131x_rx_dma_enable - re-start of Rx_DMA on the ET1310.
862 * @adapter: pointer to our adapter structure
864 static void et131x_rx_dma_enable(struct et131x_adapter *adapter)
866 /* Setup the receive dma configuration register for normal operation */
867 u32 csr = 0x2000; /* FBR1 enable */
869 if (adapter->rx_ring.fbr[0]->buffsize == 4096)
871 else if (adapter->rx_ring.fbr[0]->buffsize == 8192)
873 else if (adapter->rx_ring.fbr[0]->buffsize == 16384)
876 csr |= 0x0400; /* FBR0 enable */
877 if (adapter->rx_ring.fbr[1]->buffsize == 256)
879 else if (adapter->rx_ring.fbr[1]->buffsize == 512)
881 else if (adapter->rx_ring.fbr[1]->buffsize == 1024)
884 writel(csr, &adapter->regs->rxdma.csr);
886 csr = readl(&adapter->regs->rxdma.csr);
887 if ((csr & 0x00020000) != 0) {
889 csr = readl(&adapter->regs->rxdma.csr);
890 if ((csr & 0x00020000) != 0) {
891 dev_err(&adapter->pdev->dev,
892 "RX Dma failed to exit halt state. CSR 0x%08x\n",
899 * et131x_rx_dma_disable - Stop of Rx_DMA on the ET1310
900 * @adapter: pointer to our adapter structure
902 static void et131x_rx_dma_disable(struct et131x_adapter *adapter)
905 /* Setup the receive dma configuration register */
906 writel(0x00002001, &adapter->regs->rxdma.csr);
907 csr = readl(&adapter->regs->rxdma.csr);
908 if ((csr & 0x00020000) == 0) { /* Check halt status (bit 17) */
910 csr = readl(&adapter->regs->rxdma.csr);
911 if ((csr & 0x00020000) == 0)
912 dev_err(&adapter->pdev->dev,
913 "RX Dma failed to enter halt state. CSR 0x%08x\n",
919 * et131x_tx_dma_enable - re-start of Tx_DMA on the ET1310.
920 * @adapter: pointer to our adapter structure
922 * Mainly used after a return to the D0 (full-power) state from a lower state.
924 static void et131x_tx_dma_enable(struct et131x_adapter *adapter)
926 /* Setup the transmit dma configuration register for normal
929 writel(ET_TXDMA_SNGL_EPKT|(PARM_DMA_CACHE_DEF << ET_TXDMA_CACHE_SHIFT),
930 &adapter->regs->txdma.csr);
933 static inline void add_10bit(u32 *v, int n)
935 *v = INDEX10(*v + n) | (*v & ET_DMA10_WRAP);
938 static inline void add_12bit(u32 *v, int n)
940 *v = INDEX12(*v + n) | (*v & ET_DMA12_WRAP);
944 * et1310_config_mac_regs1 - Initialize the first part of MAC regs
945 * @adapter: pointer to our adapter structure
947 static void et1310_config_mac_regs1(struct et131x_adapter *adapter)
949 struct mac_regs __iomem *macregs = &adapter->regs->mac;
954 /* First we need to reset everything. Write to MAC configuration
955 * register 1 to perform reset.
957 writel(0xC00F0000, ¯egs->cfg1);
959 /* Next lets configure the MAC Inter-packet gap register */
960 ipg = 0x38005860; /* IPG1 0x38 IPG2 0x58 B2B 0x60 */
961 ipg |= 0x50 << 8; /* ifg enforce 0x50 */
962 writel(ipg, ¯egs->ipg);
964 /* Next lets configure the MAC Half Duplex register */
965 /* BEB trunc 0xA, Ex Defer, Rexmit 0xF Coll 0x37 */
966 writel(0x00A1F037, ¯egs->hfdp);
968 /* Next lets configure the MAC Interface Control register */
969 writel(0, ¯egs->if_ctrl);
971 /* Let's move on to setting up the mii management configuration */
972 writel(0x07, ¯egs->mii_mgmt_cfg); /* Clock reset 0x7 */
974 /* Next lets configure the MAC Station Address register. These
975 * values are read from the EEPROM during initialization and stored
976 * in the adapter structure. We write what is stored in the adapter
977 * structure to the MAC Station Address registers high and low. This
978 * station address is used for generating and checking pause control
981 station2 = (adapter->addr[1] << ET_MAC_STATION_ADDR2_OC2_SHIFT) |
982 (adapter->addr[0] << ET_MAC_STATION_ADDR2_OC1_SHIFT);
983 station1 = (adapter->addr[5] << ET_MAC_STATION_ADDR1_OC6_SHIFT) |
984 (adapter->addr[4] << ET_MAC_STATION_ADDR1_OC5_SHIFT) |
985 (adapter->addr[3] << ET_MAC_STATION_ADDR1_OC4_SHIFT) |
987 writel(station1, ¯egs->station_addr_1);
988 writel(station2, ¯egs->station_addr_2);
990 /* Max ethernet packet in bytes that will be passed by the mac without
991 * being truncated. Allow the MAC to pass 4 more than our max packet
992 * size. This is 4 for the Ethernet CRC.
994 * Packets larger than (registry_jumbo_packet) that do not contain a
995 * VLAN ID will be dropped by the Rx function.
997 writel(adapter->registry_jumbo_packet + 4, ¯egs->max_fm_len);
999 /* clear out MAC config reset */
1000 writel(0, ¯egs->cfg1);
1004 * et1310_config_mac_regs2 - Initialize the second part of MAC regs
1005 * @adapter: pointer to our adapter structure
1007 static void et1310_config_mac_regs2(struct et131x_adapter *adapter)
1010 struct mac_regs __iomem *mac = &adapter->regs->mac;
1011 struct phy_device *phydev = adapter->phydev;
1017 ctl = readl(&adapter->regs->txmac.ctl);
1018 cfg1 = readl(&mac->cfg1);
1019 cfg2 = readl(&mac->cfg2);
1020 ifctrl = readl(&mac->if_ctrl);
1022 /* Set up the if mode bits */
1024 if (phydev && phydev->speed == SPEED_1000) {
1027 ifctrl &= ~(1 << 24);
1030 ifctrl |= (1 << 24);
1033 /* We need to enable Rx/Tx */
1034 cfg1 |= CFG1_RX_ENABLE | CFG1_TX_ENABLE | CFG1_TX_FLOW;
1035 /* Initialize loop back to off */
1036 cfg1 &= ~(CFG1_LOOPBACK | CFG1_RX_FLOW);
1037 if (adapter->flowcontrol == FLOW_RXONLY ||
1038 adapter->flowcontrol == FLOW_BOTH)
1039 cfg1 |= CFG1_RX_FLOW;
1040 writel(cfg1, &mac->cfg1);
1042 /* Now we need to initialize the MAC Configuration 2 register */
1043 /* preamble 7, check length, huge frame off, pad crc, crc enable
1048 /* Turn on duplex if needed */
1049 if (phydev && phydev->duplex == DUPLEX_FULL)
1052 ifctrl &= ~(1 << 26);
1053 if (phydev && phydev->duplex == DUPLEX_HALF)
1054 ifctrl |= (1<<26); /* Enable ghd */
1056 writel(ifctrl, &mac->if_ctrl);
1057 writel(cfg2, &mac->cfg2);
1062 cfg1 = readl(&mac->cfg1);
1063 } while ((cfg1 & CFG1_WAIT) != CFG1_WAIT && delay < 100);
1066 dev_warn(&adapter->pdev->dev,
1067 "Syncd bits did not respond correctly cfg1 word 0x%08x\n",
1072 ctl |= 0x09; /* TX mac enable, FC disable */
1073 writel(ctl, &adapter->regs->txmac.ctl);
1075 /* Ready to start the RXDMA/TXDMA engine */
1076 if (adapter->flags & fMP_ADAPTER_LOWER_POWER) {
1077 et131x_rx_dma_enable(adapter);
1078 et131x_tx_dma_enable(adapter);
1083 * et1310_in_phy_coma - check if the device is in phy coma
1084 * @adapter: pointer to our adapter structure
1086 * Returns 0 if the device is not in phy coma, 1 if it is in phy coma
1088 static int et1310_in_phy_coma(struct et131x_adapter *adapter)
1092 pmcsr = readl(&adapter->regs->global.pm_csr);
1094 return ET_PM_PHY_SW_COMA & pmcsr ? 1 : 0;
1097 static void et1310_setup_device_for_multicast(struct et131x_adapter *adapter)
1099 struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac;
1106 /* If ET131X_PACKET_TYPE_MULTICAST is specified, then we provision
1107 * the multi-cast LIST. If it is NOT specified, (and "ALL" is not
1108 * specified) then we should pass NO multi-cast addresses to the
1111 if (adapter->packet_filter & ET131X_PACKET_TYPE_MULTICAST) {
1114 /* Loop through our multicast array and set up the device */
1115 for (i = 0; i < adapter->multicast_addr_count; i++) {
1118 result = ether_crc(6, adapter->multicast_list[i]);
1120 result = (result & 0x3F800000) >> 23;
1123 hash1 |= (1 << result);
1124 } else if ((31 < result) && (result < 64)) {
1126 hash2 |= (1 << result);
1127 } else if ((63 < result) && (result < 96)) {
1129 hash3 |= (1 << result);
1132 hash4 |= (1 << result);
1137 /* Write out the new hash to the device */
1138 pm_csr = readl(&adapter->regs->global.pm_csr);
1139 if (!et1310_in_phy_coma(adapter)) {
1140 writel(hash1, &rxmac->multi_hash1);
1141 writel(hash2, &rxmac->multi_hash2);
1142 writel(hash3, &rxmac->multi_hash3);
1143 writel(hash4, &rxmac->multi_hash4);
1147 static void et1310_setup_device_for_unicast(struct et131x_adapter *adapter)
1149 struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac;
1155 /* Set up unicast packet filter reg 3 to be the first two octets of
1156 * the MAC address for both address
1158 * Set up unicast packet filter reg 2 to be the octets 2 - 5 of the
1159 * MAC address for second address
1161 * Set up unicast packet filter reg 3 to be the octets 2 - 5 of the
1162 * MAC address for first address
1164 uni_pf3 = (adapter->addr[0] << ET_UNI_PF_ADDR2_1_SHIFT) |
1165 (adapter->addr[1] << ET_UNI_PF_ADDR2_2_SHIFT) |
1166 (adapter->addr[0] << ET_UNI_PF_ADDR1_1_SHIFT) |
1169 uni_pf2 = (adapter->addr[2] << ET_UNI_PF_ADDR2_3_SHIFT) |
1170 (adapter->addr[3] << ET_UNI_PF_ADDR2_4_SHIFT) |
1171 (adapter->addr[4] << ET_UNI_PF_ADDR2_5_SHIFT) |
1174 uni_pf1 = (adapter->addr[2] << ET_UNI_PF_ADDR1_3_SHIFT) |
1175 (adapter->addr[3] << ET_UNI_PF_ADDR1_4_SHIFT) |
1176 (adapter->addr[4] << ET_UNI_PF_ADDR1_5_SHIFT) |
1179 pm_csr = readl(&adapter->regs->global.pm_csr);
1180 if (!et1310_in_phy_coma(adapter)) {
1181 writel(uni_pf1, &rxmac->uni_pf_addr1);
1182 writel(uni_pf2, &rxmac->uni_pf_addr2);
1183 writel(uni_pf3, &rxmac->uni_pf_addr3);
1187 static void et1310_config_rxmac_regs(struct et131x_adapter *adapter)
1189 struct rxmac_regs __iomem *rxmac = &adapter->regs->rxmac;
1190 struct phy_device *phydev = adapter->phydev;
1195 /* Disable the MAC while it is being configured (also disable WOL) */
1196 writel(0x8, &rxmac->ctrl);
1198 /* Initialize WOL to disabled. */
1199 writel(0, &rxmac->crc0);
1200 writel(0, &rxmac->crc12);
1201 writel(0, &rxmac->crc34);
1203 /* We need to set the WOL mask0 - mask4 next. We initialize it to
1204 * its default Values of 0x00000000 because there are not WOL masks
1207 writel(0, &rxmac->mask0_word0);
1208 writel(0, &rxmac->mask0_word1);
1209 writel(0, &rxmac->mask0_word2);
1210 writel(0, &rxmac->mask0_word3);
1212 writel(0, &rxmac->mask1_word0);
1213 writel(0, &rxmac->mask1_word1);
1214 writel(0, &rxmac->mask1_word2);
1215 writel(0, &rxmac->mask1_word3);
1217 writel(0, &rxmac->mask2_word0);
1218 writel(0, &rxmac->mask2_word1);
1219 writel(0, &rxmac->mask2_word2);
1220 writel(0, &rxmac->mask2_word3);
1222 writel(0, &rxmac->mask3_word0);
1223 writel(0, &rxmac->mask3_word1);
1224 writel(0, &rxmac->mask3_word2);
1225 writel(0, &rxmac->mask3_word3);
1227 writel(0, &rxmac->mask4_word0);
1228 writel(0, &rxmac->mask4_word1);
1229 writel(0, &rxmac->mask4_word2);
1230 writel(0, &rxmac->mask4_word3);
1232 /* Lets setup the WOL Source Address */
1233 sa_lo = (adapter->addr[2] << ET_WOL_LO_SA3_SHIFT) |
1234 (adapter->addr[3] << ET_WOL_LO_SA4_SHIFT) |
1235 (adapter->addr[4] << ET_WOL_LO_SA5_SHIFT) |
1237 writel(sa_lo, &rxmac->sa_lo);
1239 sa_hi = (u32) (adapter->addr[0] << ET_WOL_HI_SA1_SHIFT) |
1241 writel(sa_hi, &rxmac->sa_hi);
1243 /* Disable all Packet Filtering */
1244 writel(0, &rxmac->pf_ctrl);
1246 /* Let's initialize the Unicast Packet filtering address */
1247 if (adapter->packet_filter & ET131X_PACKET_TYPE_DIRECTED) {
1248 et1310_setup_device_for_unicast(adapter);
1249 pf_ctrl |= 4; /* Unicast filter */
1251 writel(0, &rxmac->uni_pf_addr1);
1252 writel(0, &rxmac->uni_pf_addr2);
1253 writel(0, &rxmac->uni_pf_addr3);
1256 /* Let's initialize the Multicast hash */
1257 if (!(adapter->packet_filter & ET131X_PACKET_TYPE_ALL_MULTICAST)) {
1258 pf_ctrl |= 2; /* Multicast filter */
1259 et1310_setup_device_for_multicast(adapter);
1262 /* Runt packet filtering. Didn't work in version A silicon. */
1263 pf_ctrl |= (NIC_MIN_PACKET_SIZE + 4) << 16;
1264 pf_ctrl |= 8; /* Fragment filter */
1266 if (adapter->registry_jumbo_packet > 8192)
1267 /* In order to transmit jumbo packets greater than 8k, the
1268 * FIFO between RxMAC and RxDMA needs to be reduced in size
1269 * to (16k - Jumbo packet size). In order to implement this,
1270 * we must use "cut through" mode in the RxMAC, which chops
1271 * packets down into segments which are (max_size * 16). In
1272 * this case we selected 256 bytes, since this is the size of
1273 * the PCI-Express TLP's that the 1310 uses.
1275 * seg_en on, fc_en off, size 0x10
1277 writel(0x41, &rxmac->mcif_ctrl_max_seg);
1279 writel(0, &rxmac->mcif_ctrl_max_seg);
1281 /* Initialize the MCIF water marks */
1282 writel(0, &rxmac->mcif_water_mark);
1284 /* Initialize the MIF control */
1285 writel(0, &rxmac->mif_ctrl);
1287 /* Initialize the Space Available Register */
1288 writel(0, &rxmac->space_avail);
1290 /* Initialize the the mif_ctrl register
1291 * bit 3: Receive code error. One or more nibbles were signaled as
1292 * errors during the reception of the packet. Clear this
1293 * bit in Gigabit, set it in 100Mbit. This was derived
1294 * experimentally at UNH.
1295 * bit 4: Receive CRC error. The packet's CRC did not match the
1296 * internally generated CRC.
1297 * bit 5: Receive length check error. Indicates that frame length
1298 * field value in the packet does not match the actual data
1299 * byte length and is not a type field.
1300 * bit 16: Receive frame truncated.
1301 * bit 17: Drop packet enable
1303 if (phydev && phydev->speed == SPEED_100)
1304 writel(0x30038, &rxmac->mif_ctrl);
1306 writel(0x30030, &rxmac->mif_ctrl);
1308 /* Finally we initialize RxMac to be enabled & WOL disabled. Packet
1309 * filter is always enabled since it is where the runt packets are
1310 * supposed to be dropped. For version A silicon, runt packet
1311 * dropping doesn't work, so it is disabled in the pf_ctrl register,
1312 * but we still leave the packet filter on.
1314 writel(pf_ctrl, &rxmac->pf_ctrl);
1315 writel(0x9, &rxmac->ctrl);
1318 static void et1310_config_txmac_regs(struct et131x_adapter *adapter)
1320 struct txmac_regs __iomem *txmac = &adapter->regs->txmac;
1322 /* We need to update the Control Frame Parameters
1323 * cfpt - control frame pause timer set to 64 (0x40)
1324 * cfep - control frame extended pause timer set to 0x0
1326 if (adapter->flowcontrol == FLOW_NONE)
1327 writel(0, &txmac->cf_param);
1329 writel(0x40, &txmac->cf_param);
1332 static void et1310_config_macstat_regs(struct et131x_adapter *adapter)
1334 struct macstat_regs __iomem *macstat =
1335 &adapter->regs->macstat;
1337 /* Next we need to initialize all the macstat registers to zero on
1340 writel(0, &macstat->txrx_0_64_byte_frames);
1341 writel(0, &macstat->txrx_65_127_byte_frames);
1342 writel(0, &macstat->txrx_128_255_byte_frames);
1343 writel(0, &macstat->txrx_256_511_byte_frames);
1344 writel(0, &macstat->txrx_512_1023_byte_frames);
1345 writel(0, &macstat->txrx_1024_1518_byte_frames);
1346 writel(0, &macstat->txrx_1519_1522_gvln_frames);
1348 writel(0, &macstat->rx_bytes);
1349 writel(0, &macstat->rx_packets);
1350 writel(0, &macstat->rx_fcs_errs);
1351 writel(0, &macstat->rx_multicast_packets);
1352 writel(0, &macstat->rx_broadcast_packets);
1353 writel(0, &macstat->rx_control_frames);
1354 writel(0, &macstat->rx_pause_frames);
1355 writel(0, &macstat->rx_unknown_opcodes);
1356 writel(0, &macstat->rx_align_errs);
1357 writel(0, &macstat->rx_frame_len_errs);
1358 writel(0, &macstat->rx_code_errs);
1359 writel(0, &macstat->rx_carrier_sense_errs);
1360 writel(0, &macstat->rx_undersize_packets);
1361 writel(0, &macstat->rx_oversize_packets);
1362 writel(0, &macstat->rx_fragment_packets);
1363 writel(0, &macstat->rx_jabbers);
1364 writel(0, &macstat->rx_drops);
1366 writel(0, &macstat->tx_bytes);
1367 writel(0, &macstat->tx_packets);
1368 writel(0, &macstat->tx_multicast_packets);
1369 writel(0, &macstat->tx_broadcast_packets);
1370 writel(0, &macstat->tx_pause_frames);
1371 writel(0, &macstat->tx_deferred);
1372 writel(0, &macstat->tx_excessive_deferred);
1373 writel(0, &macstat->tx_single_collisions);
1374 writel(0, &macstat->tx_multiple_collisions);
1375 writel(0, &macstat->tx_late_collisions);
1376 writel(0, &macstat->tx_excessive_collisions);
1377 writel(0, &macstat->tx_total_collisions);
1378 writel(0, &macstat->tx_pause_honored_frames);
1379 writel(0, &macstat->tx_drops);
1380 writel(0, &macstat->tx_jabbers);
1381 writel(0, &macstat->tx_fcs_errs);
1382 writel(0, &macstat->tx_control_frames);
1383 writel(0, &macstat->tx_oversize_frames);
1384 writel(0, &macstat->tx_undersize_frames);
1385 writel(0, &macstat->tx_fragments);
1386 writel(0, &macstat->carry_reg1);
1387 writel(0, &macstat->carry_reg2);
1389 /* Unmask any counters that we want to track the overflow of.
1390 * Initially this will be all counters. It may become clear later
1391 * that we do not need to track all counters.
1393 writel(0xFFFFBE32, &macstat->carry_reg1_mask);
1394 writel(0xFFFE7E8B, &macstat->carry_reg2_mask);
1398 * et131x_phy_mii_read - Read from the PHY through the MII Interface on the MAC
1399 * @adapter: pointer to our private adapter structure
1400 * @addr: the address of the transceiver
1401 * @reg: the register to read
1402 * @value: pointer to a 16-bit value in which the value will be stored
1404 * Returns 0 on success, errno on failure (as defined in errno.h)
1406 static int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr,
1409 struct mac_regs __iomem *mac = &adapter->regs->mac;
1416 /* Save a local copy of the registers we are dealing with so we can
1419 mii_addr = readl(&mac->mii_mgmt_addr);
1420 mii_cmd = readl(&mac->mii_mgmt_cmd);
1422 /* Stop the current operation */
1423 writel(0, &mac->mii_mgmt_cmd);
1425 /* Set up the register we need to read from on the correct PHY */
1426 writel(MII_ADDR(addr, reg), &mac->mii_mgmt_addr);
1428 writel(0x1, &mac->mii_mgmt_cmd);
1433 mii_indicator = readl(&mac->mii_mgmt_indicator);
1434 } while ((mii_indicator & MGMT_WAIT) && delay < 50);
1436 /* If we hit the max delay, we could not read the register */
1438 dev_warn(&adapter->pdev->dev,
1439 "reg 0x%08x could not be read\n", reg);
1440 dev_warn(&adapter->pdev->dev, "status is 0x%08x\n",
1446 /* If we hit here we were able to read the register and we need to
1447 * return the value to the caller */
1448 *value = readl(&mac->mii_mgmt_stat) & 0xFFFF;
1450 /* Stop the read operation */
1451 writel(0, &mac->mii_mgmt_cmd);
1453 /* set the registers we touched back to the state at which we entered
1456 writel(mii_addr, &mac->mii_mgmt_addr);
1457 writel(mii_cmd, &mac->mii_mgmt_cmd);
1462 static int et131x_mii_read(struct et131x_adapter *adapter, u8 reg, u16 *value)
1464 struct phy_device *phydev = adapter->phydev;
1469 return et131x_phy_mii_read(adapter, phydev->addr, reg, value);
1473 * et131x_mii_write - Write to a PHY register through the MII interface of the MAC
1474 * @adapter: pointer to our private adapter structure
1475 * @reg: the register to read
1476 * @value: 16-bit value to write
1478 * FIXME: one caller in netdev still
1480 * Return 0 on success, errno on failure (as defined in errno.h)
1482 static int et131x_mii_write(struct et131x_adapter *adapter, u8 reg, u16 value)
1484 struct mac_regs __iomem *mac = &adapter->regs->mac;
1485 struct phy_device *phydev = adapter->phydev;
1496 addr = phydev->addr;
1498 /* Save a local copy of the registers we are dealing with so we can
1501 mii_addr = readl(&mac->mii_mgmt_addr);
1502 mii_cmd = readl(&mac->mii_mgmt_cmd);
1504 /* Stop the current operation */
1505 writel(0, &mac->mii_mgmt_cmd);
1507 /* Set up the register we need to write to on the correct PHY */
1508 writel(MII_ADDR(addr, reg), &mac->mii_mgmt_addr);
1510 /* Add the value to write to the registers to the mac */
1511 writel(value, &mac->mii_mgmt_ctrl);
1516 mii_indicator = readl(&mac->mii_mgmt_indicator);
1517 } while ((mii_indicator & MGMT_BUSY) && delay < 100);
1519 /* If we hit the max delay, we could not write the register */
1523 dev_warn(&adapter->pdev->dev,
1524 "reg 0x%08x could not be written", reg);
1525 dev_warn(&adapter->pdev->dev, "status is 0x%08x\n",
1527 dev_warn(&adapter->pdev->dev, "command is 0x%08x\n",
1528 readl(&mac->mii_mgmt_cmd));
1530 et131x_mii_read(adapter, reg, &tmp);
1534 /* Stop the write operation */
1535 writel(0, &mac->mii_mgmt_cmd);
1538 * set the registers we touched back to the state at which we entered
1541 writel(mii_addr, &mac->mii_mgmt_addr);
1542 writel(mii_cmd, &mac->mii_mgmt_cmd);
1547 /* Still used from _mac for BIT_READ */
1548 static void et1310_phy_access_mii_bit(struct et131x_adapter *adapter,
1549 u16 action, u16 regnum, u16 bitnum,
1553 u16 mask = 0x0001 << bitnum;
1555 /* Read the requested register */
1556 et131x_mii_read(adapter, regnum, ®);
1559 case TRUEPHY_BIT_READ:
1560 *value = (reg & mask) >> bitnum;
1563 case TRUEPHY_BIT_SET:
1564 et131x_mii_write(adapter, regnum, reg | mask);
1567 case TRUEPHY_BIT_CLEAR:
1568 et131x_mii_write(adapter, regnum, reg & ~mask);
1576 static void et1310_config_flow_control(struct et131x_adapter *adapter)
1578 struct phy_device *phydev = adapter->phydev;
1580 if (phydev->duplex == DUPLEX_HALF) {
1581 adapter->flowcontrol = FLOW_NONE;
1583 char remote_pause, remote_async_pause;
1585 et1310_phy_access_mii_bit(adapter,
1586 TRUEPHY_BIT_READ, 5, 10, &remote_pause);
1587 et1310_phy_access_mii_bit(adapter,
1588 TRUEPHY_BIT_READ, 5, 11,
1589 &remote_async_pause);
1591 if ((remote_pause == TRUEPHY_BIT_SET) &&
1592 (remote_async_pause == TRUEPHY_BIT_SET)) {
1593 adapter->flowcontrol = adapter->wanted_flow;
1594 } else if ((remote_pause == TRUEPHY_BIT_SET) &&
1595 (remote_async_pause == TRUEPHY_BIT_CLEAR)) {
1596 if (adapter->wanted_flow == FLOW_BOTH)
1597 adapter->flowcontrol = FLOW_BOTH;
1599 adapter->flowcontrol = FLOW_NONE;
1600 } else if ((remote_pause == TRUEPHY_BIT_CLEAR) &&
1601 (remote_async_pause == TRUEPHY_BIT_CLEAR)) {
1602 adapter->flowcontrol = FLOW_NONE;
1603 } else {/* if (remote_pause == TRUEPHY_CLEAR_BIT &&
1604 remote_async_pause == TRUEPHY_SET_BIT) */
1605 if (adapter->wanted_flow == FLOW_BOTH)
1606 adapter->flowcontrol = FLOW_RXONLY;
1608 adapter->flowcontrol = FLOW_NONE;
1614 * et1310_update_macstat_host_counters - Update the local copy of the statistics
1615 * @adapter: pointer to the adapter structure
1617 static void et1310_update_macstat_host_counters(struct et131x_adapter *adapter)
1619 struct ce_stats *stats = &adapter->stats;
1620 struct macstat_regs __iomem *macstat =
1621 &adapter->regs->macstat;
1623 stats->tx_collisions += readl(&macstat->tx_total_collisions);
1624 stats->tx_first_collisions += readl(&macstat->tx_single_collisions);
1625 stats->tx_deferred += readl(&macstat->tx_deferred);
1626 stats->tx_excessive_collisions +=
1627 readl(&macstat->tx_multiple_collisions);
1628 stats->tx_late_collisions += readl(&macstat->tx_late_collisions);
1629 stats->tx_underflows += readl(&macstat->tx_undersize_frames);
1630 stats->tx_max_pkt_errs += readl(&macstat->tx_oversize_frames);
1632 stats->rx_align_errs += readl(&macstat->rx_align_errs);
1633 stats->rx_crc_errs += readl(&macstat->rx_code_errs);
1634 stats->rcvd_pkts_dropped += readl(&macstat->rx_drops);
1635 stats->rx_overflows += readl(&macstat->rx_oversize_packets);
1636 stats->rx_code_violations += readl(&macstat->rx_fcs_errs);
1637 stats->rx_length_errs += readl(&macstat->rx_frame_len_errs);
1638 stats->rx_other_errs += readl(&macstat->rx_fragment_packets);
1642 * et1310_handle_macstat_interrupt
1643 * @adapter: pointer to the adapter structure
1645 * One of the MACSTAT counters has wrapped. Update the local copy of
1646 * the statistics held in the adapter structure, checking the "wrap"
1647 * bit for each counter.
1649 static void et1310_handle_macstat_interrupt(struct et131x_adapter *adapter)
1654 /* Read the interrupt bits from the register(s). These are Clear On
1657 carry_reg1 = readl(&adapter->regs->macstat.carry_reg1);
1658 carry_reg2 = readl(&adapter->regs->macstat.carry_reg2);
1660 writel(carry_reg1, &adapter->regs->macstat.carry_reg1);
1661 writel(carry_reg2, &adapter->regs->macstat.carry_reg2);
1663 /* We need to do update the host copy of all the MAC_STAT counters.
1664 * For each counter, check it's overflow bit. If the overflow bit is
1665 * set, then increment the host version of the count by one complete
1666 * revolution of the counter. This routine is called when the counter
1667 * block indicates that one of the counters has wrapped.
1669 if (carry_reg1 & (1 << 14))
1670 adapter->stats.rx_code_violations += COUNTER_WRAP_16_BIT;
1671 if (carry_reg1 & (1 << 8))
1672 adapter->stats.rx_align_errs += COUNTER_WRAP_12_BIT;
1673 if (carry_reg1 & (1 << 7))
1674 adapter->stats.rx_length_errs += COUNTER_WRAP_16_BIT;
1675 if (carry_reg1 & (1 << 2))
1676 adapter->stats.rx_other_errs += COUNTER_WRAP_16_BIT;
1677 if (carry_reg1 & (1 << 6))
1678 adapter->stats.rx_crc_errs += COUNTER_WRAP_16_BIT;
1679 if (carry_reg1 & (1 << 3))
1680 adapter->stats.rx_overflows += COUNTER_WRAP_16_BIT;
1681 if (carry_reg1 & (1 << 0))
1682 adapter->stats.rcvd_pkts_dropped += COUNTER_WRAP_16_BIT;
1683 if (carry_reg2 & (1 << 16))
1684 adapter->stats.tx_max_pkt_errs += COUNTER_WRAP_12_BIT;
1685 if (carry_reg2 & (1 << 15))
1686 adapter->stats.tx_underflows += COUNTER_WRAP_12_BIT;
1687 if (carry_reg2 & (1 << 6))
1688 adapter->stats.tx_first_collisions += COUNTER_WRAP_12_BIT;
1689 if (carry_reg2 & (1 << 8))
1690 adapter->stats.tx_deferred += COUNTER_WRAP_12_BIT;
1691 if (carry_reg2 & (1 << 5))
1692 adapter->stats.tx_excessive_collisions += COUNTER_WRAP_12_BIT;
1693 if (carry_reg2 & (1 << 4))
1694 adapter->stats.tx_late_collisions += COUNTER_WRAP_12_BIT;
1695 if (carry_reg2 & (1 << 2))
1696 adapter->stats.tx_collisions += COUNTER_WRAP_12_BIT;
1699 static int et131x_mdio_read(struct mii_bus *bus, int phy_addr, int reg)
1701 struct net_device *netdev = bus->priv;
1702 struct et131x_adapter *adapter = netdev_priv(netdev);
1706 ret = et131x_phy_mii_read(adapter, phy_addr, reg, &value);
1714 static int et131x_mdio_write(struct mii_bus *bus, int phy_addr,
1717 struct net_device *netdev = bus->priv;
1718 struct et131x_adapter *adapter = netdev_priv(netdev);
1720 return et131x_mii_write(adapter, reg, value);
1723 static int et131x_mdio_reset(struct mii_bus *bus)
1725 struct net_device *netdev = bus->priv;
1726 struct et131x_adapter *adapter = netdev_priv(netdev);
1728 et131x_mii_write(adapter, MII_BMCR, BMCR_RESET);
1734 * et1310_phy_power_down - PHY power control
1735 * @adapter: device to control
1736 * @down: true for off/false for back on
1738 * one hundred, ten, one thousand megs
1739 * How would you like to have your LAN accessed
1740 * Can't you see that this code processed
1741 * Phy power, phy power..
1743 static void et1310_phy_power_down(struct et131x_adapter *adapter, bool down)
1747 et131x_mii_read(adapter, MII_BMCR, &data);
1748 data &= ~BMCR_PDOWN;
1751 et131x_mii_write(adapter, MII_BMCR, data);
1755 * et131x_xcvr_init - Init the phy if we are setting it into force mode
1756 * @adapter: pointer to our private adapter structure
1759 static void et131x_xcvr_init(struct et131x_adapter *adapter)
1765 et131x_mii_read(adapter, PHY_INTERRUPT_STATUS, &isr);
1766 et131x_mii_read(adapter, PHY_INTERRUPT_MASK, &imr);
1768 /* Set the link status interrupt only. Bad behavior when link status
1769 * and auto neg are set, we run into a nested interrupt problem
1771 imr |= (ET_PHY_INT_MASK_AUTONEGSTAT |
1772 ET_PHY_INT_MASK_LINKSTAT |
1773 ET_PHY_INT_MASK_ENABLE);
1775 et131x_mii_write(adapter, PHY_INTERRUPT_MASK, imr);
1777 /* Set the LED behavior such that LED 1 indicates speed (off =
1778 * 10Mbits, blink = 100Mbits, on = 1000Mbits) and LED 2 indicates
1779 * link and activity (on for link, blink off for activity).
1781 * NOTE: Some customizations have been added here for specific
1782 * vendors; The LED behavior is now determined by vendor data in the
1783 * EEPROM. However, the above description is the default.
1785 if ((adapter->eeprom_data[1] & 0x4) == 0) {
1786 et131x_mii_read(adapter, PHY_LED_2, &lcr2);
1788 lcr2 &= (ET_LED2_LED_100TX | ET_LED2_LED_1000T);
1789 lcr2 |= (LED_VAL_LINKON_ACTIVE << LED_LINK_SHIFT);
1791 if ((adapter->eeprom_data[1] & 0x8) == 0)
1792 lcr2 |= (LED_VAL_1000BT_100BTX << LED_TXRX_SHIFT);
1794 lcr2 |= (LED_VAL_LINKON << LED_TXRX_SHIFT);
1796 et131x_mii_write(adapter, PHY_LED_2, lcr2);
1801 * et131x_configure_global_regs - configure JAGCore global regs
1802 * @adapter: pointer to our adapter structure
1804 * Used to configure the global registers on the JAGCore
1806 static void et131x_configure_global_regs(struct et131x_adapter *adapter)
1808 struct global_regs __iomem *regs = &adapter->regs->global;
1810 writel(0, ®s->rxq_start_addr);
1811 writel(INTERNAL_MEM_SIZE - 1, ®s->txq_end_addr);
1813 if (adapter->registry_jumbo_packet < 2048) {
1814 /* Tx / RxDMA and Tx/Rx MAC interfaces have a 1k word
1815 * block of RAM that the driver can split between Tx
1816 * and Rx as it desires. Our default is to split it
1819 writel(PARM_RX_MEM_END_DEF, ®s->rxq_end_addr);
1820 writel(PARM_RX_MEM_END_DEF + 1, ®s->txq_start_addr);
1821 } else if (adapter->registry_jumbo_packet < 8192) {
1822 /* For jumbo packets > 2k but < 8k, split 50-50. */
1823 writel(INTERNAL_MEM_RX_OFFSET, ®s->rxq_end_addr);
1824 writel(INTERNAL_MEM_RX_OFFSET + 1, ®s->txq_start_addr);
1826 /* 9216 is the only packet size greater than 8k that
1827 * is available. The Tx buffer has to be big enough
1828 * for one whole packet on the Tx side. We'll make
1829 * the Tx 9408, and give the rest to Rx
1831 writel(0x01b3, ®s->rxq_end_addr);
1832 writel(0x01b4, ®s->txq_start_addr);
1835 /* Initialize the loopback register. Disable all loopbacks. */
1836 writel(0, ®s->loopback);
1839 writel(0, ®s->msi_config);
1841 /* By default, disable the watchdog timer. It will be enabled when
1842 * a packet is queued.
1844 writel(0, ®s->watchdog_timer);
1848 * et131x_config_rx_dma_regs - Start of Rx_DMA init sequence
1849 * @adapter: pointer to our adapter structure
1851 static void et131x_config_rx_dma_regs(struct et131x_adapter *adapter)
1853 struct rxdma_regs __iomem *rx_dma = &adapter->regs->rxdma;
1854 struct rx_ring *rx_local = &adapter->rx_ring;
1855 struct fbr_desc *fbr_entry;
1858 unsigned long flags;
1860 /* Halt RXDMA to perform the reconfigure. */
1861 et131x_rx_dma_disable(adapter);
1863 /* Load the completion writeback physical address
1865 * NOTE : dma_alloc_coherent(), used above to alloc DMA regions,
1866 * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
1867 * are ever returned, make sure the high part is retrieved here
1868 * before storing the adjusted address.
1870 writel((u32) ((u64)rx_local->rx_status_bus >> 32),
1871 &rx_dma->dma_wb_base_hi);
1872 writel((u32) rx_local->rx_status_bus, &rx_dma->dma_wb_base_lo);
1874 memset(rx_local->rx_status_block, 0, sizeof(struct rx_status_block));
1876 /* Set the address and parameters of the packet status ring into the
1879 writel((u32) ((u64)rx_local->ps_ring_physaddr >> 32),
1880 &rx_dma->psr_base_hi);
1881 writel((u32) rx_local->ps_ring_physaddr, &rx_dma->psr_base_lo);
1882 writel(rx_local->psr_num_entries - 1, &rx_dma->psr_num_des);
1883 writel(0, &rx_dma->psr_full_offset);
1885 psr_num_des = readl(&rx_dma->psr_num_des) & 0xFFF;
1886 writel((psr_num_des * LO_MARK_PERCENT_FOR_PSR) / 100,
1887 &rx_dma->psr_min_des);
1889 spin_lock_irqsave(&adapter->rcv_lock, flags);
1891 /* These local variables track the PSR in the adapter structure */
1892 rx_local->local_psr_full = 0;
1894 /* Now's the best time to initialize FBR1 contents */
1895 fbr_entry = (struct fbr_desc *) rx_local->fbr[0]->ring_virtaddr;
1896 for (entry = 0; entry < rx_local->fbr[0]->num_entries; entry++) {
1897 fbr_entry->addr_hi = rx_local->fbr[0]->bus_high[entry];
1898 fbr_entry->addr_lo = rx_local->fbr[0]->bus_low[entry];
1899 fbr_entry->word2 = entry;
1903 /* Set the address and parameters of Free buffer ring 1 (and 0 if
1904 * required) into the 1310's registers
1906 writel((u32) (rx_local->fbr[0]->real_physaddr >> 32),
1907 &rx_dma->fbr1_base_hi);
1908 writel((u32) rx_local->fbr[0]->real_physaddr, &rx_dma->fbr1_base_lo);
1909 writel(rx_local->fbr[0]->num_entries - 1, &rx_dma->fbr1_num_des);
1910 writel(ET_DMA10_WRAP, &rx_dma->fbr1_full_offset);
1912 /* This variable tracks the free buffer ring 1 full position, so it
1913 * has to match the above.
1915 rx_local->fbr[0]->local_full = ET_DMA10_WRAP;
1917 ((rx_local->fbr[0]->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
1918 &rx_dma->fbr1_min_des);
1921 /* Now's the best time to initialize FBR0 contents */
1922 fbr_entry = (struct fbr_desc *) rx_local->fbr[1]->ring_virtaddr;
1923 for (entry = 0; entry < rx_local->fbr[1]->num_entries; entry++) {
1924 fbr_entry->addr_hi = rx_local->fbr[1]->bus_high[entry];
1925 fbr_entry->addr_lo = rx_local->fbr[1]->bus_low[entry];
1926 fbr_entry->word2 = entry;
1930 writel((u32) (rx_local->fbr[1]->real_physaddr >> 32),
1931 &rx_dma->fbr0_base_hi);
1932 writel((u32) rx_local->fbr[1]->real_physaddr, &rx_dma->fbr0_base_lo);
1933 writel(rx_local->fbr[1]->num_entries - 1, &rx_dma->fbr0_num_des);
1934 writel(ET_DMA10_WRAP, &rx_dma->fbr0_full_offset);
1936 /* This variable tracks the free buffer ring 0 full position, so it
1937 * has to match the above.
1939 rx_local->fbr[1]->local_full = ET_DMA10_WRAP;
1941 ((rx_local->fbr[1]->num_entries * LO_MARK_PERCENT_FOR_RX) / 100) - 1,
1942 &rx_dma->fbr0_min_des);
1945 /* Program the number of packets we will receive before generating an
1947 * For version B silicon, this value gets updated once autoneg is
1950 writel(PARM_RX_NUM_BUFS_DEF, &rx_dma->num_pkt_done);
1952 /* The "time_done" is not working correctly to coalesce interrupts
1953 * after a given time period, but rather is giving us an interrupt
1954 * regardless of whether we have received packets.
1955 * This value gets updated once autoneg is complete.
1957 writel(PARM_RX_TIME_INT_DEF, &rx_dma->max_pkt_time);
1959 spin_unlock_irqrestore(&adapter->rcv_lock, flags);
1963 * et131x_config_tx_dma_regs - Set up the tx dma section of the JAGCore.
1964 * @adapter: pointer to our private adapter structure
1966 * Configure the transmit engine with the ring buffers we have created
1967 * and prepare it for use.
1969 static void et131x_config_tx_dma_regs(struct et131x_adapter *adapter)
1971 struct txdma_regs __iomem *txdma = &adapter->regs->txdma;
1973 /* Load the hardware with the start of the transmit descriptor ring. */
1974 writel((u32) ((u64)adapter->tx_ring.tx_desc_ring_pa >> 32),
1975 &txdma->pr_base_hi);
1976 writel((u32) adapter->tx_ring.tx_desc_ring_pa,
1977 &txdma->pr_base_lo);
1979 /* Initialise the transmit DMA engine */
1980 writel(NUM_DESC_PER_RING_TX - 1, &txdma->pr_num_des);
1982 /* Load the completion writeback physical address */
1983 writel((u32)((u64)adapter->tx_ring.tx_status_pa >> 32),
1984 &txdma->dma_wb_base_hi);
1985 writel((u32)adapter->tx_ring.tx_status_pa, &txdma->dma_wb_base_lo);
1987 *adapter->tx_ring.tx_status = 0;
1989 writel(0, &txdma->service_request);
1990 adapter->tx_ring.send_idx = 0;
1994 * et131x_adapter_setup - Set the adapter up as per cassini+ documentation
1995 * @adapter: pointer to our private adapter structure
1997 * Returns 0 on success, errno on failure (as defined in errno.h)
1999 static void et131x_adapter_setup(struct et131x_adapter *adapter)
2001 /* Configure the JAGCore */
2002 et131x_configure_global_regs(adapter);
2004 et1310_config_mac_regs1(adapter);
2006 /* Configure the MMC registers */
2007 /* All we need to do is initialize the Memory Control Register */
2008 writel(ET_MMC_ENABLE, &adapter->regs->mmc.mmc_ctrl);
2010 et1310_config_rxmac_regs(adapter);
2011 et1310_config_txmac_regs(adapter);
2013 et131x_config_rx_dma_regs(adapter);
2014 et131x_config_tx_dma_regs(adapter);
2016 et1310_config_macstat_regs(adapter);
2018 et1310_phy_power_down(adapter, 0);
2019 et131x_xcvr_init(adapter);
2023 * et131x_soft_reset - Issue a soft reset to the hardware, complete for ET1310
2024 * @adapter: pointer to our private adapter structure
2026 static void et131x_soft_reset(struct et131x_adapter *adapter)
2028 /* Disable MAC Core */
2029 writel(0xc00f0000, &adapter->regs->mac.cfg1);
2031 /* Set everything to a reset value */
2032 writel(0x7F, &adapter->regs->global.sw_reset);
2033 writel(0x000f0000, &adapter->regs->mac.cfg1);
2034 writel(0x00000000, &adapter->regs->mac.cfg1);
2038 * et131x_enable_interrupts - enable interrupt
2039 * @adapter: et131x device
2041 * Enable the appropriate interrupts on the ET131x according to our
2044 static void et131x_enable_interrupts(struct et131x_adapter *adapter)
2048 /* Enable all global interrupts */
2049 if (adapter->flowcontrol == FLOW_TXONLY ||
2050 adapter->flowcontrol == FLOW_BOTH)
2051 mask = INT_MASK_ENABLE;
2053 mask = INT_MASK_ENABLE_NO_FLOW;
2055 writel(mask, &adapter->regs->global.int_mask);
2059 * et131x_disable_interrupts - interrupt disable
2060 * @adapter: et131x device
2062 * Block all interrupts from the et131x device at the device itself
2064 static void et131x_disable_interrupts(struct et131x_adapter *adapter)
2066 /* Disable all global interrupts */
2067 writel(INT_MASK_DISABLE, &adapter->regs->global.int_mask);
2071 * et131x_tx_dma_disable - Stop of Tx_DMA on the ET1310
2072 * @adapter: pointer to our adapter structure
2074 static void et131x_tx_dma_disable(struct et131x_adapter *adapter)
2076 /* Setup the tramsmit dma configuration register */
2077 writel(ET_TXDMA_CSR_HALT|ET_TXDMA_SNGL_EPKT,
2078 &adapter->regs->txdma.csr);
2082 * et131x_enable_txrx - Enable tx/rx queues
2083 * @netdev: device to be enabled
2085 static void et131x_enable_txrx(struct net_device *netdev)
2087 struct et131x_adapter *adapter = netdev_priv(netdev);
2089 /* Enable the Tx and Rx DMA engines (if not already enabled) */
2090 et131x_rx_dma_enable(adapter);
2091 et131x_tx_dma_enable(adapter);
2093 /* Enable device interrupts */
2094 if (adapter->flags & fMP_ADAPTER_INTERRUPT_IN_USE)
2095 et131x_enable_interrupts(adapter);
2097 /* We're ready to move some data, so start the queue */
2098 netif_start_queue(netdev);
2102 * et131x_disable_txrx - Disable tx/rx queues
2103 * @netdev: device to be disabled
2105 static void et131x_disable_txrx(struct net_device *netdev)
2107 struct et131x_adapter *adapter = netdev_priv(netdev);
2109 /* First thing is to stop the queue */
2110 netif_stop_queue(netdev);
2112 /* Stop the Tx and Rx DMA engines */
2113 et131x_rx_dma_disable(adapter);
2114 et131x_tx_dma_disable(adapter);
2116 /* Disable device interrupts */
2117 et131x_disable_interrupts(adapter);
2121 * et131x_init_send - Initialize send data structures
2122 * @adapter: pointer to our private adapter structure
2124 static void et131x_init_send(struct et131x_adapter *adapter)
2128 struct tx_ring *tx_ring;
2130 /* Setup some convenience pointers */
2131 tx_ring = &adapter->tx_ring;
2132 tcb = adapter->tx_ring.tcb_ring;
2134 tx_ring->tcb_qhead = tcb;
2136 memset(tcb, 0, sizeof(struct tcb) * NUM_TCB);
2138 /* Go through and set up each TCB */
2139 for (ct = 0; ct++ < NUM_TCB; tcb++)
2140 /* Set the link pointer in HW TCB to the next TCB in the
2143 tcb->next = tcb + 1;
2145 /* Set the tail pointer */
2147 tx_ring->tcb_qtail = tcb;
2149 /* Curr send queue should now be empty */
2150 tx_ring->send_head = NULL;
2151 tx_ring->send_tail = NULL;
2155 * et1310_enable_phy_coma - called when network cable is unplugged
2156 * @adapter: pointer to our adapter structure
2158 * driver receive an phy status change interrupt while in D0 and check that
2159 * phy_status is down.
2161 * -- gate off JAGCore;
2162 * -- set gigE PHY in Coma mode
2163 * -- wake on phy_interrupt; Perform software reset JAGCore,
2164 * re-initialize jagcore and gigE PHY
2166 * Add D0-ASPM-PhyLinkDown Support:
2167 * -- while in D0, when there is a phy_interrupt indicating phy link
2168 * down status, call the MPSetPhyComa routine to enter this active
2169 * state power saving mode
2170 * -- while in D0-ASPM-PhyLinkDown mode, when there is a phy_interrupt
2171 * indicating linkup status, call the MPDisablePhyComa routine to
2172 * restore JAGCore and gigE PHY
2174 static void et1310_enable_phy_coma(struct et131x_adapter *adapter)
2176 unsigned long flags;
2179 pmcsr = readl(&adapter->regs->global.pm_csr);
2181 /* Save the GbE PHY speed and duplex modes. Need to restore this
2182 * when cable is plugged back in
2185 * TODO - when PM is re-enabled, check if we need to
2186 * perform a similar task as this -
2187 * adapter->pdown_speed = adapter->ai_force_speed;
2188 * adapter->pdown_duplex = adapter->ai_force_duplex;
2191 /* Stop sending packets. */
2192 spin_lock_irqsave(&adapter->send_hw_lock, flags);
2193 adapter->flags |= fMP_ADAPTER_LOWER_POWER;
2194 spin_unlock_irqrestore(&adapter->send_hw_lock, flags);
2196 /* Wait for outstanding Receive packets */
2198 et131x_disable_txrx(adapter->netdev);
2200 /* Gate off JAGCore 3 clock domains */
2201 pmcsr &= ~ET_PMCSR_INIT;
2202 writel(pmcsr, &adapter->regs->global.pm_csr);
2204 /* Program gigE PHY in to Coma mode */
2205 pmcsr |= ET_PM_PHY_SW_COMA;
2206 writel(pmcsr, &adapter->regs->global.pm_csr);
2210 * et1310_disable_phy_coma - Disable the Phy Coma Mode
2211 * @adapter: pointer to our adapter structure
2213 static void et1310_disable_phy_coma(struct et131x_adapter *adapter)
2217 pmcsr = readl(&adapter->regs->global.pm_csr);
2219 /* Disable phy_sw_coma register and re-enable JAGCore clocks */
2220 pmcsr |= ET_PMCSR_INIT;
2221 pmcsr &= ~ET_PM_PHY_SW_COMA;
2222 writel(pmcsr, &adapter->regs->global.pm_csr);
2224 /* Restore the GbE PHY speed and duplex modes;
2225 * Reset JAGCore; re-configure and initialize JAGCore and gigE PHY
2227 /* TODO - when PM is re-enabled, check if we need to
2228 * perform a similar task as this -
2229 * adapter->ai_force_speed = adapter->pdown_speed;
2230 * adapter->ai_force_duplex = adapter->pdown_duplex;
2233 /* Re-initialize the send structures */
2234 et131x_init_send(adapter);
2236 /* Bring the device back to the state it was during init prior to
2237 * autonegotiation being complete. This way, when we get the auto-neg
2238 * complete interrupt, we can complete init by calling ConfigMacREGS2.
2240 et131x_soft_reset(adapter);
2242 /* setup et1310 as per the documentation ?? */
2243 et131x_adapter_setup(adapter);
2245 /* Allow Tx to restart */
2246 adapter->flags &= ~fMP_ADAPTER_LOWER_POWER;
2248 et131x_enable_txrx(adapter->netdev);
2251 static inline u32 bump_free_buff_ring(u32 *free_buff_ring, u32 limit)
2253 u32 tmp_free_buff_ring = *free_buff_ring;
2254 tmp_free_buff_ring++;
2255 /* This works for all cases where limit < 1024. The 1023 case
2256 works because 1023++ is 1024 which means the if condition is not
2257 taken but the carry of the bit into the wrap bit toggles the wrap
2259 if ((tmp_free_buff_ring & ET_DMA10_MASK) > limit) {
2260 tmp_free_buff_ring &= ~ET_DMA10_MASK;
2261 tmp_free_buff_ring ^= ET_DMA10_WRAP;
2263 /* For the 1023 case */
2264 tmp_free_buff_ring &= (ET_DMA10_MASK|ET_DMA10_WRAP);
2265 *free_buff_ring = tmp_free_buff_ring;
2266 return tmp_free_buff_ring;
2270 * et131x_align_allocated_memory - Align allocated memory on a given boundary
2271 * @adapter: pointer to our adapter structure
2272 * @phys_addr: pointer to Physical address
2273 * @offset: pointer to the offset variable
2274 * @mask: correct mask
2276 static void et131x_align_allocated_memory(struct et131x_adapter *adapter,
2277 u64 *phys_addr, u64 *offset,
2280 u64 new_addr = *phys_addr & ~mask;
2284 if (new_addr != *phys_addr) {
2285 /* Move to next aligned block */
2286 new_addr += mask + 1;
2287 /* Return offset for adjusting virt addr */
2288 *offset = new_addr - *phys_addr;
2289 /* Return new physical address */
2290 *phys_addr = new_addr;
2295 * et131x_rx_dma_memory_alloc
2296 * @adapter: pointer to our private adapter structure
2298 * Returns 0 on success and errno on failure (as defined in errno.h)
2300 * Allocates Free buffer ring 1 for sure, free buffer ring 0 if required,
2301 * and the Packet Status Ring.
2303 static int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
2307 u32 pktstat_ringsize, fbr_chunksize;
2308 struct rx_ring *rx_ring;
2310 /* Setup some convenience pointers */
2311 rx_ring = &adapter->rx_ring;
2313 /* Alloc memory for the lookup table */
2315 rx_ring->fbr[1] = kmalloc(sizeof(struct fbr_lookup), GFP_KERNEL);
2317 rx_ring->fbr[0] = kmalloc(sizeof(struct fbr_lookup), GFP_KERNEL);
2319 /* The first thing we will do is configure the sizes of the buffer
2320 * rings. These will change based on jumbo packet support. Larger
2321 * jumbo packets increases the size of each entry in FBR0, and the
2322 * number of entries in FBR0, while at the same time decreasing the
2323 * number of entries in FBR1.
2325 * FBR1 holds "large" frames, FBR0 holds "small" frames. If FBR1
2326 * entries are huge in order to accommodate a "jumbo" frame, then it
2327 * will have less entries. Conversely, FBR1 will now be relied upon
2328 * to carry more "normal" frames, thus it's entry size also increases
2329 * and the number of entries goes up too (since it now carries
2330 * "small" + "regular" packets.
2332 * In this scheme, we try to maintain 512 entries between the two
2333 * rings. Also, FBR1 remains a constant size - when it's size doubles
2334 * the number of entries halves. FBR0 increases in size, however.
2337 if (adapter->registry_jumbo_packet < 2048) {
2339 rx_ring->fbr[1]->buffsize = 256;
2340 rx_ring->fbr[1]->num_entries = 512;
2342 rx_ring->fbr[0]->buffsize = 2048;
2343 rx_ring->fbr[0]->num_entries = 512;
2344 } else if (adapter->registry_jumbo_packet < 4096) {
2346 rx_ring->fbr[1]->buffsize = 512;
2347 rx_ring->fbr[1]->num_entries = 1024;
2349 rx_ring->fbr[0]->buffsize = 4096;
2350 rx_ring->fbr[0]->num_entries = 512;
2353 rx_ring->fbr[1]->buffsize = 1024;
2354 rx_ring->fbr[1]->num_entries = 768;
2356 rx_ring->fbr[0]->buffsize = 16384;
2357 rx_ring->fbr[0]->num_entries = 128;
2361 adapter->rx_ring.psr_num_entries =
2362 adapter->rx_ring.fbr[1]->num_entries +
2363 adapter->rx_ring.fbr[0]->num_entries;
2365 adapter->rx_ring.psr_num_entries = adapter->rx_ring.fbr[0]->num_entries;
2368 /* Allocate an area of memory for Free Buffer Ring 1 */
2369 bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr[0]->num_entries) +
2371 rx_ring->fbr[0]->ring_virtaddr = dma_alloc_coherent(&adapter->pdev->dev,
2373 &rx_ring->fbr[0]->ring_physaddr,
2375 if (!rx_ring->fbr[0]->ring_virtaddr) {
2376 dev_err(&adapter->pdev->dev,
2377 "Cannot alloc memory for Free Buffer Ring 1\n");
2381 /* Save physical address
2383 * NOTE: dma_alloc_coherent(), used above to alloc DMA regions,
2384 * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
2385 * are ever returned, make sure the high part is retrieved here
2386 * before storing the adjusted address.
2388 rx_ring->fbr[0]->real_physaddr = rx_ring->fbr[0]->ring_physaddr;
2390 /* Align Free Buffer Ring 1 on a 4K boundary */
2391 et131x_align_allocated_memory(adapter,
2392 &rx_ring->fbr[0]->real_physaddr,
2393 &rx_ring->fbr[0]->offset, 0x0FFF);
2395 rx_ring->fbr[0]->ring_virtaddr =
2396 (void *)((u8 *) rx_ring->fbr[0]->ring_virtaddr +
2397 rx_ring->fbr[0]->offset);
2400 /* Allocate an area of memory for Free Buffer Ring 0 */
2401 bufsize = (sizeof(struct fbr_desc) * rx_ring->fbr[1]->num_entries) +
2403 rx_ring->fbr[1]->ring_virtaddr = dma_alloc_coherent(&adapter->pdev->dev,
2405 &rx_ring->fbr[1]->ring_physaddr,
2407 if (!rx_ring->fbr[1]->ring_virtaddr) {
2408 dev_err(&adapter->pdev->dev,
2409 "Cannot alloc memory for Free Buffer Ring 0\n");
2413 /* Save physical address
2415 * NOTE: dma_alloc_coherent(), used above to alloc DMA regions,
2416 * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
2417 * are ever returned, make sure the high part is retrieved here before
2418 * storing the adjusted address.
2420 rx_ring->fbr[1]->real_physaddr = rx_ring->fbr[1]->ring_physaddr;
2422 /* Align Free Buffer Ring 0 on a 4K boundary */
2423 et131x_align_allocated_memory(adapter,
2424 &rx_ring->fbr[1]->real_physaddr,
2425 &rx_ring->fbr[1]->offset, 0x0FFF);
2427 rx_ring->fbr[1]->ring_virtaddr =
2428 (void *)((u8 *) rx_ring->fbr[1]->ring_virtaddr +
2429 rx_ring->fbr[1]->offset);
2431 for (i = 0; i < (rx_ring->fbr[0]->num_entries / FBR_CHUNKS); i++) {
2432 u64 fbr1_tmp_physaddr;
2436 /* This code allocates an area of memory big enough for N
2437 * free buffers + (buffer_size - 1) so that the buffers can
2438 * be aligned on 4k boundaries. If each buffer were aligned
2439 * to a buffer_size boundary, the effect would be to double
2440 * the size of FBR0. By allocating N buffers at once, we
2441 * reduce this overhead.
2443 if (rx_ring->fbr[0]->buffsize > 4096)
2446 fbr1_align = rx_ring->fbr[0]->buffsize;
2449 (FBR_CHUNKS * rx_ring->fbr[0]->buffsize) + fbr1_align - 1;
2450 rx_ring->fbr[0]->mem_virtaddrs[i] =
2451 dma_alloc_coherent(&adapter->pdev->dev, fbr_chunksize,
2452 &rx_ring->fbr[0]->mem_physaddrs[i],
2455 if (!rx_ring->fbr[0]->mem_virtaddrs[i]) {
2456 dev_err(&adapter->pdev->dev,
2457 "Could not alloc memory\n");
2461 /* See NOTE in "Save Physical Address" comment above */
2462 fbr1_tmp_physaddr = rx_ring->fbr[0]->mem_physaddrs[i];
2464 et131x_align_allocated_memory(adapter,
2466 &fbr1_offset, (fbr1_align - 1));
2468 for (j = 0; j < FBR_CHUNKS; j++) {
2469 u32 index = (i * FBR_CHUNKS) + j;
2471 /* Save the Virtual address of this index for quick
2474 rx_ring->fbr[0]->virt[index] =
2475 (u8 *) rx_ring->fbr[0]->mem_virtaddrs[i] +
2476 (j * rx_ring->fbr[0]->buffsize) + fbr1_offset;
2478 /* now store the physical address in the descriptor
2479 * so the device can access it
2481 rx_ring->fbr[0]->bus_high[index] =
2482 (u32) (fbr1_tmp_physaddr >> 32);
2483 rx_ring->fbr[0]->bus_low[index] =
2484 (u32) fbr1_tmp_physaddr;
2486 fbr1_tmp_physaddr += rx_ring->fbr[0]->buffsize;
2488 rx_ring->fbr[0]->buffer1[index] =
2489 rx_ring->fbr[0]->virt[index];
2490 rx_ring->fbr[0]->buffer2[index] =
2491 rx_ring->fbr[0]->virt[index] - 4;
2496 /* Same for FBR0 (if in use) */
2497 for (i = 0; i < (rx_ring->fbr[1]->num_entries / FBR_CHUNKS); i++) {
2498 u64 fbr0_tmp_physaddr;
2502 ((FBR_CHUNKS + 1) * rx_ring->fbr[1]->buffsize) - 1;
2503 rx_ring->fbr[1]->mem_virtaddrs[i] =
2504 dma_alloc_coherent(&adapter->pdev->dev, fbr_chunksize,
2505 &rx_ring->fbr[1]->mem_physaddrs[i],
2508 if (!rx_ring->fbr[1]->mem_virtaddrs[i]) {
2509 dev_err(&adapter->pdev->dev,
2510 "Could not alloc memory\n");
2514 /* See NOTE in "Save Physical Address" comment above */
2515 fbr0_tmp_physaddr = rx_ring->fbr[1]->mem_physaddrs[i];
2517 et131x_align_allocated_memory(adapter,
2520 rx_ring->fbr[1]->buffsize - 1);
2522 for (j = 0; j < FBR_CHUNKS; j++) {
2523 u32 index = (i * FBR_CHUNKS) + j;
2525 rx_ring->fbr[1]->virt[index] =
2526 (u8 *) rx_ring->fbr[1]->mem_virtaddrs[i] +
2527 (j * rx_ring->fbr[1]->buffsize) + fbr0_offset;
2529 rx_ring->fbr[1]->bus_high[index] =
2530 (u32) (fbr0_tmp_physaddr >> 32);
2531 rx_ring->fbr[1]->bus_low[index] =
2532 (u32) fbr0_tmp_physaddr;
2534 fbr0_tmp_physaddr += rx_ring->fbr[1]->buffsize;
2536 rx_ring->fbr[1]->buffer1[index] =
2537 rx_ring->fbr[1]->virt[index];
2538 rx_ring->fbr[1]->buffer2[index] =
2539 rx_ring->fbr[1]->virt[index] - 4;
2544 /* Allocate an area of memory for FIFO of Packet Status ring entries */
2546 sizeof(struct pkt_stat_desc) * adapter->rx_ring.psr_num_entries;
2548 rx_ring->ps_ring_virtaddr = dma_alloc_coherent(&adapter->pdev->dev,
2550 &rx_ring->ps_ring_physaddr,
2553 if (!rx_ring->ps_ring_virtaddr) {
2554 dev_err(&adapter->pdev->dev,
2555 "Cannot alloc memory for Packet Status Ring\n");
2558 pr_info("Packet Status Ring %llx\n",
2559 (unsigned long long) rx_ring->ps_ring_physaddr);
2562 * NOTE : dma_alloc_coherent(), used above to alloc DMA regions,
2563 * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
2564 * are ever returned, make sure the high part is retrieved here before
2565 * storing the adjusted address.
2568 /* Allocate an area of memory for writeback of status information */
2569 rx_ring->rx_status_block = dma_alloc_coherent(&adapter->pdev->dev,
2570 sizeof(struct rx_status_block),
2571 &rx_ring->rx_status_bus,
2573 if (!rx_ring->rx_status_block) {
2574 dev_err(&adapter->pdev->dev,
2575 "Cannot alloc memory for Status Block\n");
2578 rx_ring->num_rfd = NIC_DEFAULT_NUM_RFD;
2579 pr_info("PRS %llx\n", (unsigned long long)rx_ring->rx_status_bus);
2582 * kmem_cache_create initializes a lookaside list. After successful
2583 * creation, nonpaged fixed-size blocks can be allocated from and
2584 * freed to the lookaside list.
2585 * RFDs will be allocated from this pool.
2587 rx_ring->recv_lookaside = kmem_cache_create(adapter->netdev->name,
2594 adapter->flags |= fMP_ADAPTER_RECV_LOOKASIDE;
2596 /* The RFDs are going to be put on lists later on, so initialize the
2599 INIT_LIST_HEAD(&rx_ring->recv_list);
2604 * et131x_rx_dma_memory_free - Free all memory allocated within this module.
2605 * @adapter: pointer to our private adapter structure
2607 static void et131x_rx_dma_memory_free(struct et131x_adapter *adapter)
2611 u32 pktstat_ringsize;
2613 struct rx_ring *rx_ring;
2615 /* Setup some convenience pointers */
2616 rx_ring = &adapter->rx_ring;
2618 /* Free RFDs and associated packet descriptors */
2619 WARN_ON(rx_ring->num_ready_recv != rx_ring->num_rfd);
2621 while (!list_empty(&rx_ring->recv_list)) {
2622 rfd = (struct rfd *) list_entry(rx_ring->recv_list.next,
2623 struct rfd, list_node);
2625 list_del(&rfd->list_node);
2627 kmem_cache_free(adapter->rx_ring.recv_lookaside, rfd);
2630 /* Free Free Buffer Ring 1 */
2631 if (rx_ring->fbr[0]->ring_virtaddr) {
2632 /* First the packet memory */
2633 for (index = 0; index <
2634 (rx_ring->fbr[0]->num_entries / FBR_CHUNKS); index++) {
2635 if (rx_ring->fbr[0]->mem_virtaddrs[index]) {
2638 if (rx_ring->fbr[0]->buffsize > 4096)
2641 fbr1_align = rx_ring->fbr[0]->buffsize;
2644 (rx_ring->fbr[0]->buffsize * FBR_CHUNKS) +
2647 dma_free_coherent(&adapter->pdev->dev,
2649 rx_ring->fbr[0]->mem_virtaddrs[index],
2650 rx_ring->fbr[0]->mem_physaddrs[index]);
2652 rx_ring->fbr[0]->mem_virtaddrs[index] = NULL;
2656 /* Now the FIFO itself */
2657 rx_ring->fbr[0]->ring_virtaddr = (void *)((u8 *)
2658 rx_ring->fbr[0]->ring_virtaddr - rx_ring->fbr[0]->offset);
2661 (sizeof(struct fbr_desc) * rx_ring->fbr[0]->num_entries) +
2664 dma_free_coherent(&adapter->pdev->dev, bufsize,
2665 rx_ring->fbr[0]->ring_virtaddr,
2666 rx_ring->fbr[0]->ring_physaddr);
2668 rx_ring->fbr[0]->ring_virtaddr = NULL;
2672 /* Now the same for Free Buffer Ring 0 */
2673 if (rx_ring->fbr[1]->ring_virtaddr) {
2674 /* First the packet memory */
2675 for (index = 0; index <
2676 (rx_ring->fbr[1]->num_entries / FBR_CHUNKS); index++) {
2677 if (rx_ring->fbr[1]->mem_virtaddrs[index]) {
2679 (rx_ring->fbr[1]->buffsize *
2680 (FBR_CHUNKS + 1)) - 1;
2682 dma_free_coherent(&adapter->pdev->dev,
2684 rx_ring->fbr[1]->mem_virtaddrs[index],
2685 rx_ring->fbr[1]->mem_physaddrs[index]);
2687 rx_ring->fbr[1]->mem_virtaddrs[index] = NULL;
2691 /* Now the FIFO itself */
2692 rx_ring->fbr[1]->ring_virtaddr = (void *)((u8 *)
2693 rx_ring->fbr[1]->ring_virtaddr - rx_ring->fbr[1]->offset);
2696 (sizeof(struct fbr_desc) * rx_ring->fbr[1]->num_entries) +
2699 dma_free_coherent(&adapter->pdev->dev,
2701 rx_ring->fbr[1]->ring_virtaddr,
2702 rx_ring->fbr[1]->ring_physaddr);
2704 rx_ring->fbr[1]->ring_virtaddr = NULL;
2708 /* Free Packet Status Ring */
2709 if (rx_ring->ps_ring_virtaddr) {
2711 sizeof(struct pkt_stat_desc) *
2712 adapter->rx_ring.psr_num_entries;
2714 dma_free_coherent(&adapter->pdev->dev, pktstat_ringsize,
2715 rx_ring->ps_ring_virtaddr,
2716 rx_ring->ps_ring_physaddr);
2718 rx_ring->ps_ring_virtaddr = NULL;
2721 /* Free area of memory for the writeback of status information */
2722 if (rx_ring->rx_status_block) {
2723 dma_free_coherent(&adapter->pdev->dev,
2724 sizeof(struct rx_status_block),
2725 rx_ring->rx_status_block, rx_ring->rx_status_bus);
2726 rx_ring->rx_status_block = NULL;
2729 /* Destroy the lookaside (RFD) pool */
2730 if (adapter->flags & fMP_ADAPTER_RECV_LOOKASIDE) {
2731 kmem_cache_destroy(rx_ring->recv_lookaside);
2732 adapter->flags &= ~fMP_ADAPTER_RECV_LOOKASIDE;
2735 /* Free the FBR Lookup Table */
2737 kfree(rx_ring->fbr[1]);
2740 kfree(rx_ring->fbr[0]);
2742 /* Reset Counters */
2743 rx_ring->num_ready_recv = 0;
2747 * et131x_init_recv - Initialize receive data structures.
2748 * @adapter: pointer to our private adapter structure
2750 * Returns 0 on success and errno on failure (as defined in errno.h)
2752 static int et131x_init_recv(struct et131x_adapter *adapter)
2754 int status = -ENOMEM;
2755 struct rfd *rfd = NULL;
2758 struct rx_ring *rx_ring;
2760 /* Setup some convenience pointers */
2761 rx_ring = &adapter->rx_ring;
2763 /* Setup each RFD */
2764 for (rfdct = 0; rfdct < rx_ring->num_rfd; rfdct++) {
2765 rfd = kmem_cache_alloc(rx_ring->recv_lookaside,
2766 GFP_ATOMIC | GFP_DMA);
2769 dev_err(&adapter->pdev->dev,
2770 "Couldn't alloc RFD out of kmem_cache\n");
2777 /* Add this RFD to the recv_list */
2778 list_add_tail(&rfd->list_node, &rx_ring->recv_list);
2780 /* Increment both the available RFD's, and the total RFD's. */
2781 rx_ring->num_ready_recv++;
2785 if (numrfd > NIC_MIN_NUM_RFD)
2788 rx_ring->num_rfd = numrfd;
2791 kmem_cache_free(rx_ring->recv_lookaside, rfd);
2792 dev_err(&adapter->pdev->dev,
2793 "Allocation problems in et131x_init_recv\n");
2799 * et131x_set_rx_dma_timer - Set the heartbeat timer according to line rate.
2800 * @adapter: pointer to our adapter structure
2802 static void et131x_set_rx_dma_timer(struct et131x_adapter *adapter)
2804 struct phy_device *phydev = adapter->phydev;
2809 /* For version B silicon, we do not use the RxDMA timer for 10 and 100
2810 * Mbits/s line rates. We do not enable and RxDMA interrupt coalescing.
2812 if ((phydev->speed == SPEED_100) || (phydev->speed == SPEED_10)) {
2813 writel(0, &adapter->regs->rxdma.max_pkt_time);
2814 writel(1, &adapter->regs->rxdma.num_pkt_done);
2819 * NICReturnRFD - Recycle a RFD and put it back onto the receive list
2820 * @adapter: pointer to our adapter
2821 * @rfd: pointer to the RFD
2823 static void nic_return_rfd(struct et131x_adapter *adapter, struct rfd *rfd)
2825 struct rx_ring *rx_local = &adapter->rx_ring;
2826 struct rxdma_regs __iomem *rx_dma = &adapter->regs->rxdma;
2827 u16 buff_index = rfd->bufferindex;
2828 u8 ring_index = rfd->ringindex;
2829 unsigned long flags;
2831 /* We don't use any of the OOB data besides status. Otherwise, we
2832 * need to clean up OOB data
2836 (ring_index == 0 && buff_index < rx_local->fbr[1]->num_entries) ||
2838 (ring_index == 1 && buff_index < rx_local->fbr[0]->num_entries)) {
2839 spin_lock_irqsave(&adapter->fbr_lock, flags);
2841 if (ring_index == 1) {
2842 struct fbr_desc *next = (struct fbr_desc *)
2843 (rx_local->fbr[0]->ring_virtaddr) +
2844 INDEX10(rx_local->fbr[0]->local_full);
2846 /* Handle the Free Buffer Ring advancement here. Write
2847 * the PA / Buffer Index for the returned buffer into
2848 * the oldest (next to be freed)FBR entry
2850 next->addr_hi = rx_local->fbr[0]->bus_high[buff_index];
2851 next->addr_lo = rx_local->fbr[0]->bus_low[buff_index];
2852 next->word2 = buff_index;
2854 writel(bump_free_buff_ring(
2855 &rx_local->fbr[0]->local_full,
2856 rx_local->fbr[0]->num_entries - 1),
2857 &rx_dma->fbr1_full_offset);
2861 struct fbr_desc *next = (struct fbr_desc *)
2862 rx_local->fbr[1]->ring_virtaddr +
2863 INDEX10(rx_local->fbr[1]->local_full);
2865 /* Handle the Free Buffer Ring advancement here. Write
2866 * the PA / Buffer Index for the returned buffer into
2867 * the oldest (next to be freed) FBR entry
2869 next->addr_hi = rx_local->fbr[1]->bus_high[buff_index];
2870 next->addr_lo = rx_local->fbr[1]->bus_low[buff_index];
2871 next->word2 = buff_index;
2873 writel(bump_free_buff_ring(
2874 &rx_local->fbr[1]->local_full,
2875 rx_local->fbr[1]->num_entries - 1),
2876 &rx_dma->fbr0_full_offset);
2879 spin_unlock_irqrestore(&adapter->fbr_lock, flags);
2881 dev_err(&adapter->pdev->dev,
2882 "%s illegal Buffer Index returned\n", __func__);
2885 /* The processing on this RFD is done, so put it back on the tail of
2888 spin_lock_irqsave(&adapter->rcv_lock, flags);
2889 list_add_tail(&rfd->list_node, &rx_local->recv_list);
2890 rx_local->num_ready_recv++;
2891 spin_unlock_irqrestore(&adapter->rcv_lock, flags);
2893 WARN_ON(rx_local->num_ready_recv > rx_local->num_rfd);
2897 * nic_rx_pkts - Checks the hardware for available packets
2898 * @adapter: pointer to our adapter
2900 * Returns rfd, a pointer to our MPRFD.
2902 * Checks the hardware for available packets, using completion ring
2903 * If packets are available, it gets an RFD from the recv_list, attaches
2904 * the packet to it, puts the RFD in the RecvPendList, and also returns
2905 * the pointer to the RFD.
2907 static struct rfd *nic_rx_pkts(struct et131x_adapter *adapter)
2909 struct rx_ring *rx_local = &adapter->rx_ring;
2910 struct rx_status_block *status;
2911 struct pkt_stat_desc *psr;
2915 unsigned long flags;
2916 struct list_head *element;
2923 /* RX Status block is written by the DMA engine prior to every
2924 * interrupt. It contains the next to be used entry in the Packet
2925 * Status Ring, and also the two Free Buffer rings.
2927 status = rx_local->rx_status_block;
2928 word1 = status->word1 >> 16; /* Get the useful bits */
2930 /* Check the PSR and wrap bits do not match */
2931 if ((word1 & 0x1FFF) == (rx_local->local_psr_full & 0x1FFF))
2932 /* Looks like this ring is not updated yet */
2935 /* The packet status ring indicates that data is available. */
2936 psr = (struct pkt_stat_desc *) (rx_local->ps_ring_virtaddr) +
2937 (rx_local->local_psr_full & 0xFFF);
2939 /* Grab any information that is required once the PSR is
2940 * advanced, since we can no longer rely on the memory being
2943 len = psr->word1 & 0xFFFF;
2944 ring_index = (psr->word1 >> 26) & 0x03;
2945 buff_index = (psr->word1 >> 16) & 0x3FF;
2948 /* Indicate that we have used this PSR entry. */
2950 add_12bit(&rx_local->local_psr_full, 1);
2952 (rx_local->local_psr_full & 0xFFF) > rx_local->psr_num_entries - 1) {
2953 /* Clear psr full and toggle the wrap bit */
2954 rx_local->local_psr_full &= ~0xFFF;
2955 rx_local->local_psr_full ^= 0x1000;
2958 writel(rx_local->local_psr_full,
2959 &adapter->regs->rxdma.psr_full_offset);
2962 if (ring_index != 1)
2967 if (ring_index > 1 ||
2969 buff_index > rx_local->fbr[1]->num_entries - 1) ||
2971 buff_index > rx_local->fbr[0]->num_entries - 1)) {
2973 if (ring_index != 1 || buff_index > rx_local->fbr[0]->num_entries - 1) {
2975 /* Illegal buffer or ring index cannot be used by S/W*/
2976 dev_err(&adapter->pdev->dev,
2977 "NICRxPkts PSR Entry %d indicates "
2978 "length of %d and/or bad bi(%d)\n",
2979 rx_local->local_psr_full & 0xFFF,
2984 /* Get and fill the RFD. */
2985 spin_lock_irqsave(&adapter->rcv_lock, flags);
2988 element = rx_local->recv_list.next;
2989 rfd = (struct rfd *) list_entry(element, struct rfd, list_node);
2992 spin_unlock_irqrestore(&adapter->rcv_lock, flags);
2996 list_del(&rfd->list_node);
2997 rx_local->num_ready_recv--;
2999 spin_unlock_irqrestore(&adapter->rcv_lock, flags);
3001 rfd->bufferindex = buff_index;
3002 rfd->ringindex = ring_index;
3004 /* In V1 silicon, there is a bug which screws up filtering of
3005 * runt packets. Therefore runt packet filtering is disabled
3006 * in the MAC and the packets are dropped here. They are
3007 * also counted here.
3009 if (len < (NIC_MIN_PACKET_SIZE + 4)) {
3010 adapter->stats.rx_other_errs++;
3015 /* Determine if this is a multicast packet coming in */
3016 if ((word0 & ALCATEL_MULTICAST_PKT) &&
3017 !(word0 & ALCATEL_BROADCAST_PKT)) {
3018 /* Promiscuous mode and Multicast mode are
3019 * not mutually exclusive as was first
3020 * thought. I guess Promiscuous is just
3021 * considered a super-set of the other
3022 * filters. Generally filter is 0x2b when in
3025 if ((adapter->packet_filter &
3026 ET131X_PACKET_TYPE_MULTICAST)
3027 && !(adapter->packet_filter &
3028 ET131X_PACKET_TYPE_PROMISCUOUS)
3029 && !(adapter->packet_filter &
3030 ET131X_PACKET_TYPE_ALL_MULTICAST)) {
3032 * Note - ring_index for fbr[] array is reversed
3035 buf = rx_local->fbr[(ring_index == 0 ? 1 : 0)]->
3038 /* Loop through our list to see if the
3039 * destination address of this packet
3040 * matches one in our list.
3042 for (i = 0; i < adapter->multicast_addr_count;
3045 adapter->multicast_list[i][0]
3047 adapter->multicast_list[i][1]
3049 adapter->multicast_list[i][2]
3051 adapter->multicast_list[i][3]
3053 adapter->multicast_list[i][4]
3055 adapter->multicast_list[i][5]) {
3060 /* If our index is equal to the number
3061 * of Multicast address we have, then
3062 * this means we did not find this
3063 * packet's matching address in our
3064 * list. Set the len to zero,
3065 * so we free our RFD when we return
3066 * from this function.
3068 if (i == adapter->multicast_addr_count)
3073 adapter->stats.multicast_pkts_rcvd++;
3074 } else if (word0 & ALCATEL_BROADCAST_PKT)
3075 adapter->stats.broadcast_pkts_rcvd++;
3077 /* Not sure what this counter measures in
3078 * promiscuous mode. Perhaps we should check
3079 * the MAC address to see if it is directed
3080 * to us in promiscuous mode.
3082 adapter->stats.unicast_pkts_rcvd++;
3086 struct sk_buff *skb = NULL;
3088 /*rfd->len = len - 4; */
3091 skb = dev_alloc_skb(rfd->len + 2);
3093 dev_err(&adapter->pdev->dev,
3094 "Couldn't alloc an SKB for Rx\n");
3098 adapter->net_stats.rx_bytes += rfd->len;
3101 * Note - ring_index for fbr[] array is reversed,
3104 memcpy(skb_put(skb, rfd->len),
3105 rx_local->fbr[(ring_index == 0 ? 1 : 0)]->virt[buff_index],
3108 skb->dev = adapter->netdev;
3109 skb->protocol = eth_type_trans(skb, adapter->netdev);
3110 skb->ip_summed = CHECKSUM_NONE;
3117 nic_return_rfd(adapter, rfd);
3122 * et131x_handle_recv_interrupt - Interrupt handler for receive processing
3123 * @adapter: pointer to our adapter
3125 * Assumption, Rcv spinlock has been acquired.
3127 static void et131x_handle_recv_interrupt(struct et131x_adapter *adapter)
3129 struct rfd *rfd = NULL;
3133 /* Process up to available RFD's */
3134 while (count < NUM_PACKETS_HANDLED) {
3135 if (list_empty(&adapter->rx_ring.recv_list)) {
3136 WARN_ON(adapter->rx_ring.num_ready_recv != 0);
3141 rfd = nic_rx_pkts(adapter);
3146 /* Do not receive any packets until a filter has been set.
3147 * Do not receive any packets until we have link.
3148 * If length is zero, return the RFD in order to advance the
3151 if (!adapter->packet_filter ||
3152 !netif_carrier_ok(adapter->netdev) ||
3156 /* Increment the number of packets we received */
3157 adapter->net_stats.rx_packets++;
3159 /* Set the status on the packet, either resources or success */
3160 if (adapter->rx_ring.num_ready_recv < RFD_LOW_WATER_MARK) {
3161 dev_warn(&adapter->pdev->dev,
3162 "RFD's are running out\n");
3167 if (count == NUM_PACKETS_HANDLED || !done) {
3168 adapter->rx_ring.unfinished_receives = true;
3169 writel(PARM_TX_TIME_INT_DEF * NANO_IN_A_MICRO,
3170 &adapter->regs->global.watchdog_timer);
3172 /* Watchdog timer will disable itself if appropriate. */
3173 adapter->rx_ring.unfinished_receives = false;
3177 * et131x_tx_dma_memory_alloc
3178 * @adapter: pointer to our private adapter structure
3180 * Returns 0 on success and errno on failure (as defined in errno.h).
3182 * Allocates memory that will be visible both to the device and to the CPU.
3183 * The OS will pass us packets, pointers to which we will insert in the Tx
3184 * Descriptor queue. The device will read this queue to find the packets in
3185 * memory. The device will update the "status" in memory each time it xmits a
3188 static int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter)
3191 struct tx_ring *tx_ring = &adapter->tx_ring;
3193 /* Allocate memory for the TCB's (Transmit Control Block) */
3194 adapter->tx_ring.tcb_ring =
3195 kcalloc(NUM_TCB, sizeof(struct tcb), GFP_ATOMIC | GFP_DMA);
3196 if (!adapter->tx_ring.tcb_ring) {
3197 dev_err(&adapter->pdev->dev, "Cannot alloc memory for TCBs\n");
3201 /* Allocate enough memory for the Tx descriptor ring, and allocate
3202 * some extra so that the ring can be aligned on a 4k boundary.
3204 desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX) + 4096 - 1;
3205 tx_ring->tx_desc_ring =
3206 (struct tx_desc *) dma_alloc_coherent(&adapter->pdev->dev,
3208 &tx_ring->tx_desc_ring_pa,
3210 if (!adapter->tx_ring.tx_desc_ring) {
3211 dev_err(&adapter->pdev->dev,
3212 "Cannot alloc memory for Tx Ring\n");
3216 /* Save physical address
3218 * NOTE: dma_alloc_coherent(), used above to alloc DMA regions,
3219 * ALWAYS returns SAC (32-bit) addresses. If DAC (64-bit) addresses
3220 * are ever returned, make sure the high part is retrieved here before
3221 * storing the adjusted address.
3223 /* Allocate memory for the Tx status block */
3224 tx_ring->tx_status = dma_alloc_coherent(&adapter->pdev->dev,
3226 &tx_ring->tx_status_pa,
3228 if (!adapter->tx_ring.tx_status_pa) {
3229 dev_err(&adapter->pdev->dev,
3230 "Cannot alloc memory for Tx status block\n");
3237 * et131x_tx_dma_memory_free - Free all memory allocated within this module
3238 * @adapter: pointer to our private adapter structure
3240 * Returns 0 on success and errno on failure (as defined in errno.h).
3242 static void et131x_tx_dma_memory_free(struct et131x_adapter *adapter)
3246 if (adapter->tx_ring.tx_desc_ring) {
3247 /* Free memory relating to Tx rings here */
3248 desc_size = (sizeof(struct tx_desc) * NUM_DESC_PER_RING_TX)
3250 dma_free_coherent(&adapter->pdev->dev,
3252 adapter->tx_ring.tx_desc_ring,
3253 adapter->tx_ring.tx_desc_ring_pa);
3254 adapter->tx_ring.tx_desc_ring = NULL;
3257 /* Free memory for the Tx status block */
3258 if (adapter->tx_ring.tx_status) {
3259 dma_free_coherent(&adapter->pdev->dev,
3261 adapter->tx_ring.tx_status,
3262 adapter->tx_ring.tx_status_pa);
3264 adapter->tx_ring.tx_status = NULL;
3266 /* Free the memory for the tcb structures */
3267 kfree(adapter->tx_ring.tcb_ring);
3271 * nic_send_packet - NIC specific send handler for version B silicon.
3272 * @adapter: pointer to our adapter
3273 * @tcb: pointer to struct tcb
3275 * Returns 0 or errno.
3277 static int nic_send_packet(struct et131x_adapter *adapter, struct tcb *tcb)
3280 struct tx_desc desc[24]; /* 24 x 16 byte */
3282 u32 thiscopy, remainder;
3283 struct sk_buff *skb = tcb->skb;
3284 u32 nr_frags = skb_shinfo(skb)->nr_frags + 1;
3285 struct skb_frag_struct *frags = &skb_shinfo(skb)->frags[0];
3286 unsigned long flags;
3287 struct phy_device *phydev = adapter->phydev;
3289 /* Part of the optimizations of this send routine restrict us to
3290 * sending 24 fragments at a pass. In practice we should never see
3291 * more than 5 fragments.
3293 * NOTE: The older version of this function (below) can handle any
3294 * number of fragments. If needed, we can call this function,
3295 * although it is less efficient.
3300 memset(desc, 0, sizeof(struct tx_desc) * (nr_frags + 1));
3302 for (i = 0; i < nr_frags; i++) {
3303 /* If there is something in this element, lets get a
3304 * descriptor from the ring and get the necessary data
3307 /* If the fragments are smaller than a standard MTU,
3308 * then map them to a single descriptor in the Tx
3309 * Desc ring. However, if they're larger, as is
3310 * possible with support for jumbo packets, then
3311 * split them each across 2 descriptors.
3313 * This will work until we determine why the hardware
3314 * doesn't seem to like large fragments.
3316 if ((skb->len - skb->data_len) <= 1514) {
3317 desc[frag].addr_hi = 0;
3318 /* Low 16bits are length, high is vlan and
3319 unused currently so zero */
3320 desc[frag].len_vlan =
3321 skb->len - skb->data_len;
3323 /* NOTE: Here, the dma_addr_t returned from
3324 * dma_map_single() is implicitly cast as a
3325 * u32. Although dma_addr_t can be
3326 * 64-bit, the address returned by
3327 * dma_map_single() is always 32-bit
3328 * addressable (as defined by the pci/dma
3331 desc[frag++].addr_lo =
3332 dma_map_single(&adapter->pdev->dev,
3338 desc[frag].addr_hi = 0;
3339 desc[frag].len_vlan =
3340 (skb->len - skb->data_len) / 2;
3342 /* NOTE: Here, the dma_addr_t returned from
3343 * dma_map_single() is implicitly cast as a
3344 * u32. Although dma_addr_t can be
3345 * 64-bit, the address returned by
3346 * dma_map_single() is always 32-bit
3347 * addressable (as defined by the pci/dma
3350 desc[frag++].addr_lo =
3351 dma_map_single(&adapter->pdev->dev,
3354 skb->data_len) / 2),
3356 desc[frag].addr_hi = 0;
3358 desc[frag].len_vlan =
3359 (skb->len - skb->data_len) / 2;
3361 /* NOTE: Here, the dma_addr_t returned from
3362 * dma_map_single() is implicitly cast as a
3363 * u32. Although dma_addr_t can be
3364 * 64-bit, the address returned by
3365 * dma_map_single() is always 32-bit
3366 * addressable (as defined by the pci/dma
3369 desc[frag++].addr_lo =
3370 dma_map_single(&adapter->pdev->dev,
3373 skb->data_len) / 2),
3375 skb->data_len) / 2),
3379 desc[frag].addr_hi = 0;
3380 desc[frag].len_vlan =
3383 /* NOTE: Here, the dma_addr_t returned from
3384 * dma_map_page() is implicitly cast as a u32.
3385 * Although dma_addr_t can be 64-bit, the address
3386 * returned by dma_map_page() is always 32-bit
3387 * addressable (as defined by the pci/dma subsystem)
3389 desc[frag++].addr_lo = skb_frag_dma_map(
3390 &adapter->pdev->dev,
3398 if (phydev && phydev->speed == SPEED_1000) {
3399 if (++adapter->tx_ring.since_irq == PARM_TX_NUM_BUFS_DEF) {
3400 /* Last element & Interrupt flag */
3401 desc[frag - 1].flags = 0x5;
3402 adapter->tx_ring.since_irq = 0;
3403 } else { /* Last element */
3404 desc[frag - 1].flags = 0x1;
3407 desc[frag - 1].flags = 0x5;
3409 desc[0].flags |= 2; /* First element flag */
3411 tcb->index_start = adapter->tx_ring.send_idx;
3414 spin_lock_irqsave(&adapter->send_hw_lock, flags);
3416 thiscopy = NUM_DESC_PER_RING_TX -
3417 INDEX10(adapter->tx_ring.send_idx);
3419 if (thiscopy >= frag) {
3423 remainder = frag - thiscopy;
3426 memcpy(adapter->tx_ring.tx_desc_ring +
3427 INDEX10(adapter->tx_ring.send_idx), desc,
3428 sizeof(struct tx_desc) * thiscopy);
3430 add_10bit(&adapter->tx_ring.send_idx, thiscopy);
3432 if (INDEX10(adapter->tx_ring.send_idx) == 0 ||
3433 INDEX10(adapter->tx_ring.send_idx) == NUM_DESC_PER_RING_TX) {
3434 adapter->tx_ring.send_idx &= ~ET_DMA10_MASK;
3435 adapter->tx_ring.send_idx ^= ET_DMA10_WRAP;
3439 memcpy(adapter->tx_ring.tx_desc_ring,
3441 sizeof(struct tx_desc) * remainder);
3443 add_10bit(&adapter->tx_ring.send_idx, remainder);
3446 if (INDEX10(adapter->tx_ring.send_idx) == 0) {
3447 if (adapter->tx_ring.send_idx)
3448 tcb->index = NUM_DESC_PER_RING_TX - 1;
3450 tcb->index = ET_DMA10_WRAP|(NUM_DESC_PER_RING_TX - 1);
3452 tcb->index = adapter->tx_ring.send_idx - 1;
3454 spin_lock(&adapter->tcb_send_qlock);
3456 if (adapter->tx_ring.send_tail)
3457 adapter->tx_ring.send_tail->next = tcb;
3459 adapter->tx_ring.send_head = tcb;
3461 adapter->tx_ring.send_tail = tcb;
3463 WARN_ON(tcb->next != NULL);
3465 adapter->tx_ring.used++;
3467 spin_unlock(&adapter->tcb_send_qlock);
3469 /* Write the new write pointer back to the device. */
3470 writel(adapter->tx_ring.send_idx,
3471 &adapter->regs->txdma.service_request);
3473 /* For Gig only, we use Tx Interrupt coalescing. Enable the software
3474 * timer to wake us up if this packet isn't followed by N more.
3476 if (phydev && phydev->speed == SPEED_1000) {
3477 writel(PARM_TX_TIME_INT_DEF * NANO_IN_A_MICRO,
3478 &adapter->regs->global.watchdog_timer);
3480 spin_unlock_irqrestore(&adapter->send_hw_lock, flags);
3486 * send_packet - Do the work to send a packet
3487 * @skb: the packet(s) to send
3488 * @adapter: a pointer to the device's private adapter structure
3490 * Return 0 in almost all cases; non-zero value in extreme hard failure only.
3492 * Assumption: Send spinlock has been acquired
3494 static int send_packet(struct sk_buff *skb, struct et131x_adapter *adapter)
3497 struct tcb *tcb = NULL;
3499 unsigned long flags;
3501 /* All packets must have at least a MAC address and a protocol type */
3502 if (skb->len < ETH_HLEN)
3505 /* Get a TCB for this packet */
3506 spin_lock_irqsave(&adapter->tcb_ready_qlock, flags);
3508 tcb = adapter->tx_ring.tcb_qhead;
3511 spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags);
3515 adapter->tx_ring.tcb_qhead = tcb->next;
3517 if (adapter->tx_ring.tcb_qhead == NULL)
3518 adapter->tx_ring.tcb_qtail = NULL;
3520 spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags);
3524 if (skb->data != NULL && skb->len - skb->data_len >= 6) {
3525 shbufva = (u16 *) skb->data;
3527 if ((shbufva[0] == 0xffff) &&
3528 (shbufva[1] == 0xffff) && (shbufva[2] == 0xffff)) {
3529 tcb->flags |= fMP_DEST_BROAD;
3530 } else if ((shbufva[0] & 0x3) == 0x0001) {
3531 tcb->flags |= fMP_DEST_MULTI;
3537 /* Call the NIC specific send handler. */
3538 status = nic_send_packet(adapter, tcb);
3541 spin_lock_irqsave(&adapter->tcb_ready_qlock, flags);
3543 if (adapter->tx_ring.tcb_qtail)
3544 adapter->tx_ring.tcb_qtail->next = tcb;
3546 /* Apparently ready Q is empty. */
3547 adapter->tx_ring.tcb_qhead = tcb;
3549 adapter->tx_ring.tcb_qtail = tcb;
3550 spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags);
3553 WARN_ON(adapter->tx_ring.used > NUM_TCB);
3558 * et131x_send_packets - This function is called by the OS to send packets
3559 * @skb: the packet(s) to send
3560 * @netdev:device on which to TX the above packet(s)
3562 * Return 0 in almost all cases; non-zero value in extreme hard failure only
3564 static int et131x_send_packets(struct sk_buff *skb, struct net_device *netdev)
3567 struct et131x_adapter *adapter = netdev_priv(netdev);
3569 /* Send these packets
3571 * NOTE: The Linux Tx entry point is only given one packet at a time
3572 * to Tx, so the PacketCount and it's array used makes no sense here
3575 /* TCB is not available */
3576 if (adapter->tx_ring.used >= NUM_TCB) {
3577 /* NOTE: If there's an error on send, no need to queue the
3578 * packet under Linux; if we just send an error up to the
3579 * netif layer, it will resend the skb to us.
3583 /* We need to see if the link is up; if it's not, make the
3584 * netif layer think we're good and drop the packet
3586 if ((adapter->flags & fMP_ADAPTER_FAIL_SEND_MASK) ||
3587 !netif_carrier_ok(netdev)) {
3588 dev_kfree_skb_any(skb);
3591 adapter->net_stats.tx_dropped++;
3593 status = send_packet(skb, adapter);
3594 if (status != 0 && status != -ENOMEM) {
3595 /* On any other error, make netif think we're
3596 * OK and drop the packet
3598 dev_kfree_skb_any(skb);
3600 adapter->net_stats.tx_dropped++;
3608 * free_send_packet - Recycle a struct tcb
3609 * @adapter: pointer to our adapter
3610 * @tcb: pointer to struct tcb
3612 * Complete the packet if necessary
3613 * Assumption - Send spinlock has been acquired
3615 static inline void free_send_packet(struct et131x_adapter *adapter,
3618 unsigned long flags;
3619 struct tx_desc *desc = NULL;
3620 struct net_device_stats *stats = &adapter->net_stats;
3622 if (tcb->flags & fMP_DEST_BROAD)
3623 atomic_inc(&adapter->stats.broadcast_pkts_xmtd);
3624 else if (tcb->flags & fMP_DEST_MULTI)
3625 atomic_inc(&adapter->stats.multicast_pkts_xmtd);
3627 atomic_inc(&adapter->stats.unicast_pkts_xmtd);
3630 stats->tx_bytes += tcb->skb->len;
3632 /* Iterate through the TX descriptors on the ring
3633 * corresponding to this packet and umap the fragments
3637 desc = (struct tx_desc *)
3638 (adapter->tx_ring.tx_desc_ring +
3639 INDEX10(tcb->index_start));
3641 dma_unmap_single(&adapter->pdev->dev,
3643 desc->len_vlan, DMA_TO_DEVICE);
3645 add_10bit(&tcb->index_start, 1);
3646 if (INDEX10(tcb->index_start) >=
3647 NUM_DESC_PER_RING_TX) {
3648 tcb->index_start &= ~ET_DMA10_MASK;
3649 tcb->index_start ^= ET_DMA10_WRAP;
3651 } while (desc != (adapter->tx_ring.tx_desc_ring +
3652 INDEX10(tcb->index)));
3654 dev_kfree_skb_any(tcb->skb);
3657 memset(tcb, 0, sizeof(struct tcb));
3659 /* Add the TCB to the Ready Q */
3660 spin_lock_irqsave(&adapter->tcb_ready_qlock, flags);
3662 adapter->net_stats.tx_packets++;
3664 if (adapter->tx_ring.tcb_qtail)
3665 adapter->tx_ring.tcb_qtail->next = tcb;
3667 /* Apparently ready Q is empty. */
3668 adapter->tx_ring.tcb_qhead = tcb;
3670 adapter->tx_ring.tcb_qtail = tcb;
3672 spin_unlock_irqrestore(&adapter->tcb_ready_qlock, flags);
3673 WARN_ON(adapter->tx_ring.used < 0);
3677 * et131x_free_busy_send_packets - Free and complete the stopped active sends
3678 * @adapter: pointer to our adapter
3680 * Assumption - Send spinlock has been acquired
3682 static void et131x_free_busy_send_packets(struct et131x_adapter *adapter)
3685 unsigned long flags;
3688 /* Any packets being sent? Check the first TCB on the send list */
3689 spin_lock_irqsave(&adapter->tcb_send_qlock, flags);
3691 tcb = adapter->tx_ring.send_head;
3693 while (tcb != NULL && freed < NUM_TCB) {
3694 struct tcb *next = tcb->next;
3696 adapter->tx_ring.send_head = next;
3699 adapter->tx_ring.send_tail = NULL;
3701 adapter->tx_ring.used--;
3703 spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags);
3706 free_send_packet(adapter, tcb);
3708 spin_lock_irqsave(&adapter->tcb_send_qlock, flags);
3710 tcb = adapter->tx_ring.send_head;
3713 WARN_ON(freed == NUM_TCB);
3715 spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags);
3717 adapter->tx_ring.used = 0;
3721 * et131x_handle_send_interrupt - Interrupt handler for sending processing
3722 * @adapter: pointer to our adapter
3724 * Re-claim the send resources, complete sends and get more to send from
3725 * the send wait queue.
3727 * Assumption - Send spinlock has been acquired
3729 static void et131x_handle_send_interrupt(struct et131x_adapter *adapter)
3731 unsigned long flags;
3736 serviced = readl(&adapter->regs->txdma.new_service_complete);
3737 index = INDEX10(serviced);
3739 /* Has the ring wrapped? Process any descriptors that do not have
3740 * the same "wrap" indicator as the current completion indicator
3742 spin_lock_irqsave(&adapter->tcb_send_qlock, flags);
3744 tcb = adapter->tx_ring.send_head;
3747 ((serviced ^ tcb->index) & ET_DMA10_WRAP) &&
3748 index < INDEX10(tcb->index)) {
3749 adapter->tx_ring.used--;
3750 adapter->tx_ring.send_head = tcb->next;
3751 if (tcb->next == NULL)
3752 adapter->tx_ring.send_tail = NULL;
3754 spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags);
3755 free_send_packet(adapter, tcb);
3756 spin_lock_irqsave(&adapter->tcb_send_qlock, flags);
3758 /* Goto the next packet */
3759 tcb = adapter->tx_ring.send_head;
3762 !((serviced ^ tcb->index) & ET_DMA10_WRAP)
3763 && index > (tcb->index & ET_DMA10_MASK)) {
3764 adapter->tx_ring.used--;
3765 adapter->tx_ring.send_head = tcb->next;
3766 if (tcb->next == NULL)
3767 adapter->tx_ring.send_tail = NULL;
3769 spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags);
3770 free_send_packet(adapter, tcb);
3771 spin_lock_irqsave(&adapter->tcb_send_qlock, flags);
3773 /* Goto the next packet */
3774 tcb = adapter->tx_ring.send_head;
3777 /* Wake up the queue when we hit a low-water mark */
3778 if (adapter->tx_ring.used <= NUM_TCB / 3)
3779 netif_wake_queue(adapter->netdev);
3781 spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags);
3784 static int et131x_get_settings(struct net_device *netdev,
3785 struct ethtool_cmd *cmd)
3787 struct et131x_adapter *adapter = netdev_priv(netdev);
3789 return phy_ethtool_gset(adapter->phydev, cmd);
3792 static int et131x_set_settings(struct net_device *netdev,
3793 struct ethtool_cmd *cmd)
3795 struct et131x_adapter *adapter = netdev_priv(netdev);
3797 return phy_ethtool_sset(adapter->phydev, cmd);
3800 static int et131x_get_regs_len(struct net_device *netdev)
3802 #define ET131X_REGS_LEN 256
3803 return ET131X_REGS_LEN * sizeof(u32);
3806 static void et131x_get_regs(struct net_device *netdev,
3807 struct ethtool_regs *regs, void *regs_data)
3809 struct et131x_adapter *adapter = netdev_priv(netdev);
3810 struct address_map __iomem *aregs = adapter->regs;
3811 u32 *regs_buff = regs_data;
3814 memset(regs_data, 0, et131x_get_regs_len(netdev));
3816 regs->version = (1 << 24) | (adapter->pdev->revision << 16) |
3817 adapter->pdev->device;
3820 et131x_mii_read(adapter, MII_BMCR, (u16 *)®s_buff[num++]);
3821 et131x_mii_read(adapter, MII_BMSR, (u16 *)®s_buff[num++]);
3822 et131x_mii_read(adapter, MII_PHYSID1, (u16 *)®s_buff[num++]);
3823 et131x_mii_read(adapter, MII_PHYSID2, (u16 *)®s_buff[num++]);
3824 et131x_mii_read(adapter, MII_ADVERTISE, (u16 *)®s_buff[num++]);
3825 et131x_mii_read(adapter, MII_LPA, (u16 *)®s_buff[num++]);
3826 et131x_mii_read(adapter, MII_EXPANSION, (u16 *)®s_buff[num++]);
3827 /* Autoneg next page transmit reg */
3828 et131x_mii_read(adapter, 0x07, (u16 *)®s_buff[num++]);
3829 /* Link partner next page reg */
3830 et131x_mii_read(adapter, 0x08, (u16 *)®s_buff[num++]);
3831 et131x_mii_read(adapter, MII_CTRL1000, (u16 *)®s_buff[num++]);
3832 et131x_mii_read(adapter, MII_STAT1000, (u16 *)®s_buff[num++]);
3833 et131x_mii_read(adapter, MII_ESTATUS, (u16 *)®s_buff[num++]);
3834 et131x_mii_read(adapter, PHY_INDEX_REG, (u16 *)®s_buff[num++]);
3835 et131x_mii_read(adapter, PHY_DATA_REG, (u16 *)®s_buff[num++]);
3836 et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
3837 (u16 *)®s_buff[num++]);
3838 et131x_mii_read(adapter, PHY_LOOPBACK_CONTROL,
3839 (u16 *)®s_buff[num++]);
3840 et131x_mii_read(adapter, PHY_LOOPBACK_CONTROL+1,
3841 (u16 *)®s_buff[num++]);
3842 et131x_mii_read(adapter, PHY_REGISTER_MGMT_CONTROL,
3843 (u16 *)®s_buff[num++]);
3844 et131x_mii_read(adapter, PHY_CONFIG, (u16 *)®s_buff[num++]);
3845 et131x_mii_read(adapter, PHY_PHY_CONTROL, (u16 *)®s_buff[num++]);
3846 et131x_mii_read(adapter, PHY_INTERRUPT_MASK, (u16 *)®s_buff[num++]);
3847 et131x_mii_read(adapter, PHY_INTERRUPT_STATUS,
3848 (u16 *)®s_buff[num++]);
3849 et131x_mii_read(adapter, PHY_PHY_STATUS, (u16 *)®s_buff[num++]);
3850 et131x_mii_read(adapter, PHY_LED_1, (u16 *)®s_buff[num++]);
3851 et131x_mii_read(adapter, PHY_LED_2, (u16 *)®s_buff[num++]);
3854 regs_buff[num++] = readl(&aregs->global.txq_start_addr);
3855 regs_buff[num++] = readl(&aregs->global.txq_end_addr);
3856 regs_buff[num++] = readl(&aregs->global.rxq_start_addr);
3857 regs_buff[num++] = readl(&aregs->global.rxq_end_addr);
3858 regs_buff[num++] = readl(&aregs->global.pm_csr);
3859 regs_buff[num++] = adapter->stats.interrupt_status;
3860 regs_buff[num++] = readl(&aregs->global.int_mask);
3861 regs_buff[num++] = readl(&aregs->global.int_alias_clr_en);
3862 regs_buff[num++] = readl(&aregs->global.int_status_alias);
3863 regs_buff[num++] = readl(&aregs->global.sw_reset);
3864 regs_buff[num++] = readl(&aregs->global.slv_timer);
3865 regs_buff[num++] = readl(&aregs->global.msi_config);
3866 regs_buff[num++] = readl(&aregs->global.loopback);
3867 regs_buff[num++] = readl(&aregs->global.watchdog_timer);
3870 regs_buff[num++] = readl(&aregs->txdma.csr);
3871 regs_buff[num++] = readl(&aregs->txdma.pr_base_hi);
3872 regs_buff[num++] = readl(&aregs->txdma.pr_base_lo);
3873 regs_buff[num++] = readl(&aregs->txdma.pr_num_des);
3874 regs_buff[num++] = readl(&aregs->txdma.txq_wr_addr);
3875 regs_buff[num++] = readl(&aregs->txdma.txq_wr_addr_ext);
3876 regs_buff[num++] = readl(&aregs->txdma.txq_rd_addr);
3877 regs_buff[num++] = readl(&aregs->txdma.dma_wb_base_hi);
3878 regs_buff[num++] = readl(&aregs->txdma.dma_wb_base_lo);
3879 regs_buff[num++] = readl(&aregs->txdma.service_request);
3880 regs_buff[num++] = readl(&aregs->txdma.service_complete);
3881 regs_buff[num++] = readl(&aregs->txdma.cache_rd_index);
3882 regs_buff[num++] = readl(&aregs->txdma.cache_wr_index);
3883 regs_buff[num++] = readl(&aregs->txdma.tx_dma_error);
3884 regs_buff[num++] = readl(&aregs->txdma.desc_abort_cnt);
3885 regs_buff[num++] = readl(&aregs->txdma.payload_abort_cnt);
3886 regs_buff[num++] = readl(&aregs->txdma.writeback_abort_cnt);
3887 regs_buff[num++] = readl(&aregs->txdma.desc_timeout_cnt);
3888 regs_buff[num++] = readl(&aregs->txdma.payload_timeout_cnt);
3889 regs_buff[num++] = readl(&aregs->txdma.writeback_timeout_cnt);
3890 regs_buff[num++] = readl(&aregs->txdma.desc_error_cnt);
3891 regs_buff[num++] = readl(&aregs->txdma.payload_error_cnt);
3892 regs_buff[num++] = readl(&aregs->txdma.writeback_error_cnt);
3893 regs_buff[num++] = readl(&aregs->txdma.dropped_tlp_cnt);
3894 regs_buff[num++] = readl(&aregs->txdma.new_service_complete);
3895 regs_buff[num++] = readl(&aregs->txdma.ethernet_packet_cnt);
3898 regs_buff[num++] = readl(&aregs->rxdma.csr);
3899 regs_buff[num++] = readl(&aregs->rxdma.dma_wb_base_hi);
3900 regs_buff[num++] = readl(&aregs->rxdma.dma_wb_base_lo);
3901 regs_buff[num++] = readl(&aregs->rxdma.num_pkt_done);
3902 regs_buff[num++] = readl(&aregs->rxdma.max_pkt_time);
3903 regs_buff[num++] = readl(&aregs->rxdma.rxq_rd_addr);
3904 regs_buff[num++] = readl(&aregs->rxdma.rxq_rd_addr_ext);
3905 regs_buff[num++] = readl(&aregs->rxdma.rxq_wr_addr);
3906 regs_buff[num++] = readl(&aregs->rxdma.psr_base_hi);
3907 regs_buff[num++] = readl(&aregs->rxdma.psr_base_lo);
3908 regs_buff[num++] = readl(&aregs->rxdma.psr_num_des);
3909 regs_buff[num++] = readl(&aregs->rxdma.psr_avail_offset);
3910 regs_buff[num++] = readl(&aregs->rxdma.psr_full_offset);
3911 regs_buff[num++] = readl(&aregs->rxdma.psr_access_index);
3912 regs_buff[num++] = readl(&aregs->rxdma.psr_min_des);
3913 regs_buff[num++] = readl(&aregs->rxdma.fbr0_base_lo);
3914 regs_buff[num++] = readl(&aregs->rxdma.fbr0_base_hi);
3915 regs_buff[num++] = readl(&aregs->rxdma.fbr0_num_des);
3916 regs_buff[num++] = readl(&aregs->rxdma.fbr0_avail_offset);
3917 regs_buff[num++] = readl(&aregs->rxdma.fbr0_full_offset);
3918 regs_buff[num++] = readl(&aregs->rxdma.fbr0_rd_index);
3919 regs_buff[num++] = readl(&aregs->rxdma.fbr0_min_des);
3920 regs_buff[num++] = readl(&aregs->rxdma.fbr1_base_lo);
3921 regs_buff[num++] = readl(&aregs->rxdma.fbr1_base_hi);
3922 regs_buff[num++] = readl(&aregs->rxdma.fbr1_num_des);
3923 regs_buff[num++] = readl(&aregs->rxdma.fbr1_avail_offset);
3924 regs_buff[num++] = readl(&aregs->rxdma.fbr1_full_offset);
3925 regs_buff[num++] = readl(&aregs->rxdma.fbr1_rd_index);
3926 regs_buff[num++] = readl(&aregs->rxdma.fbr1_min_des);
3929 #define ET131X_DRVINFO_LEN 32 /* value from ethtool.h */
3930 static void et131x_get_drvinfo(struct net_device *netdev,
3931 struct ethtool_drvinfo *info)
3933 struct et131x_adapter *adapter = netdev_priv(netdev);
3935 strncpy(info->driver, DRIVER_NAME, ET131X_DRVINFO_LEN);
3936 strncpy(info->version, DRIVER_VERSION, ET131X_DRVINFO_LEN);
3937 strncpy(info->bus_info, pci_name(adapter->pdev), ET131X_DRVINFO_LEN);
3940 static struct ethtool_ops et131x_ethtool_ops = {
3941 .get_settings = et131x_get_settings,
3942 .set_settings = et131x_set_settings,
3943 .get_drvinfo = et131x_get_drvinfo,
3944 .get_regs_len = et131x_get_regs_len,
3945 .get_regs = et131x_get_regs,
3946 .get_link = ethtool_op_get_link,
3949 * et131x_hwaddr_init - set up the MAC Address on the ET1310
3950 * @adapter: pointer to our private adapter structure
3952 static void et131x_hwaddr_init(struct et131x_adapter *adapter)
3954 /* If have our default mac from init and no mac address from
3955 * EEPROM then we need to generate the last octet and set it on the
3958 if (is_zero_ether_addr(adapter->rom_addr)) {
3960 * We need to randomly generate the last octet so we
3961 * decrease our chances of setting the mac address to
3962 * same as another one of our cards in the system
3964 get_random_bytes(&adapter->addr[5], 1);
3966 * We have the default value in the register we are
3967 * working with so we need to copy the current
3968 * address into the permanent address
3970 memcpy(adapter->rom_addr,
3971 adapter->addr, ETH_ALEN);
3973 /* We do not have an override address, so set the
3974 * current address to the permanent address and add
3977 memcpy(adapter->addr,
3978 adapter->rom_addr, ETH_ALEN);
3983 * et131x_pci_init - initial PCI setup
3984 * @adapter: pointer to our private adapter structure
3985 * @pdev: our PCI device
3987 * Perform the initial setup of PCI registers and if possible initialise
3988 * the MAC address. At this point the I/O registers have yet to be mapped
3990 static int et131x_pci_init(struct et131x_adapter *adapter,
3991 struct pci_dev *pdev)
3996 rc = et131x_init_eeprom(adapter);
4000 if (!pci_is_pcie(pdev)) {
4001 dev_err(&pdev->dev, "Missing PCIe capabilities\n");
4005 /* Let's set up the PORT LOGIC Register. First we need to know what
4006 * the max_payload_size is
4008 if (pcie_capability_read_word(pdev, PCI_EXP_DEVCAP, &max_payload)) {
4010 "Could not read PCI config space for Max Payload Size\n");
4014 /* Program the Ack/Nak latency and replay timers */
4015 max_payload &= 0x07;
4017 if (max_payload < 2) {
4018 static const u16 acknak[2] = { 0x76, 0xD0 };
4019 static const u16 replay[2] = { 0x1E0, 0x2ED };
4021 if (pci_write_config_word(pdev, ET1310_PCI_ACK_NACK,
4022 acknak[max_payload])) {
4024 "Could not write PCI config space for ACK/NAK\n");
4027 if (pci_write_config_word(pdev, ET1310_PCI_REPLAY,
4028 replay[max_payload])) {
4030 "Could not write PCI config space for Replay Timer\n");
4035 /* l0s and l1 latency timers. We are using default values.
4036 * Representing 001 for L0s and 010 for L1
4038 if (pci_write_config_byte(pdev, ET1310_PCI_L0L1LATENCY, 0x11)) {
4040 "Could not write PCI config space for Latency Timers\n");
4044 /* Change the max read size to 2k */
4045 if (pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL,
4046 PCI_EXP_DEVCTL_READRQ, 0x4 << 12)) {
4048 "Couldn't change PCI config space for Max read size\n");
4052 /* Get MAC address from config space if an eeprom exists, otherwise
4053 * the MAC address there will not be valid
4055 if (!adapter->has_eeprom) {
4056 et131x_hwaddr_init(adapter);
4060 for (i = 0; i < ETH_ALEN; i++) {
4061 if (pci_read_config_byte(pdev, ET1310_PCI_MAC_ADDRESS + i,
4062 adapter->rom_addr + i)) {
4063 dev_err(&pdev->dev, "Could not read PCI config space for MAC address\n");
4067 memcpy(adapter->addr, adapter->rom_addr, ETH_ALEN);
4076 * et131x_error_timer_handler
4077 * @data: timer-specific variable; here a pointer to our adapter structure
4079 * The routine called when the error timer expires, to track the number of
4082 static void et131x_error_timer_handler(unsigned long data)
4084 struct et131x_adapter *adapter = (struct et131x_adapter *) data;
4085 struct phy_device *phydev = adapter->phydev;
4087 if (et1310_in_phy_coma(adapter)) {
4088 /* Bring the device immediately out of coma, to
4089 * prevent it from sleeping indefinitely, this
4090 * mechanism could be improved! */
4091 et1310_disable_phy_coma(adapter);
4092 adapter->boot_coma = 20;
4094 et1310_update_macstat_host_counters(adapter);
4097 if (!phydev->link && adapter->boot_coma < 11)
4098 adapter->boot_coma++;
4100 if (adapter->boot_coma == 10) {
4101 if (!phydev->link) {
4102 if (!et1310_in_phy_coma(adapter)) {
4103 /* NOTE - This was originally a 'sync with
4104 * interrupt'. How to do that under Linux?
4106 et131x_enable_interrupts(adapter);
4107 et1310_enable_phy_coma(adapter);
4112 /* This is a periodic timer, so reschedule */
4113 mod_timer(&adapter->error_timer, jiffies +
4114 TX_ERROR_PERIOD * HZ / 1000);
4118 * et131x_adapter_memory_alloc
4119 * @adapter: pointer to our private adapter structure
4121 * Returns 0 on success, errno on failure (as defined in errno.h).
4123 * Allocate all the memory blocks for send, receive and others.
4125 static int et131x_adapter_memory_alloc(struct et131x_adapter *adapter)
4129 /* Allocate memory for the Tx Ring */
4130 status = et131x_tx_dma_memory_alloc(adapter);
4132 dev_err(&adapter->pdev->dev,
4133 "et131x_tx_dma_memory_alloc FAILED\n");
4136 /* Receive buffer memory allocation */
4137 status = et131x_rx_dma_memory_alloc(adapter);
4139 dev_err(&adapter->pdev->dev,
4140 "et131x_rx_dma_memory_alloc FAILED\n");
4141 et131x_tx_dma_memory_free(adapter);
4145 /* Init receive data structures */
4146 status = et131x_init_recv(adapter);
4148 dev_err(&adapter->pdev->dev,
4149 "et131x_init_recv FAILED\n");
4150 et131x_tx_dma_memory_free(adapter);
4151 et131x_rx_dma_memory_free(adapter);
4157 * et131x_adapter_memory_free - Free all memory allocated for use by Tx & Rx
4158 * @adapter: pointer to our private adapter structure
4160 static void et131x_adapter_memory_free(struct et131x_adapter *adapter)
4162 /* Free DMA memory */
4163 et131x_tx_dma_memory_free(adapter);
4164 et131x_rx_dma_memory_free(adapter);
4167 static void et131x_adjust_link(struct net_device *netdev)
4169 struct et131x_adapter *adapter = netdev_priv(netdev);
4170 struct phy_device *phydev = adapter->phydev;
4172 if (netif_carrier_ok(netdev)) {
4173 adapter->boot_coma = 20;
4175 if (phydev && phydev->speed == SPEED_10) {
4177 * NOTE - Is there a way to query this without
4179 * && TRU_QueryCoreType(adapter->hTruePhy, 0)==
4180 * EMI_TRUEPHY_A13O) {
4184 et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
4186 et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
4188 et131x_mii_write(adapter, PHY_INDEX_REG,
4189 register18 | 0x8402);
4190 et131x_mii_write(adapter, PHY_DATA_REG,
4192 et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
4196 et1310_config_flow_control(adapter);
4198 if (phydev && phydev->speed == SPEED_1000 &&
4199 adapter->registry_jumbo_packet > 2048) {
4202 et131x_mii_read(adapter, PHY_CONFIG, ®);
4203 reg &= ~ET_PHY_CONFIG_TX_FIFO_DEPTH;
4204 reg |= ET_PHY_CONFIG_FIFO_DEPTH_32;
4205 et131x_mii_write(adapter, PHY_CONFIG, reg);
4208 et131x_set_rx_dma_timer(adapter);
4209 et1310_config_mac_regs2(adapter);
4212 if (phydev && phydev->link != adapter->link) {
4214 * Check to see if we are in coma mode and if
4215 * so, disable it because we will not be able
4216 * to read PHY values until we are out.
4218 if (et1310_in_phy_coma(adapter))
4219 et1310_disable_phy_coma(adapter);
4222 adapter->boot_coma = 20;
4224 dev_warn(&adapter->pdev->dev,
4225 "Link down - cable problem ?\n");
4226 adapter->boot_coma = 0;
4228 if (phydev->speed == SPEED_10) {
4229 /* NOTE - Is there a way to query this without
4231 * && TRU_QueryCoreType(adapter->hTruePhy, 0) ==
4236 et131x_mii_read(adapter, PHY_MPHY_CONTROL_REG,
4238 et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
4240 et131x_mii_write(adapter, PHY_INDEX_REG,
4241 register18 | 0x8402);
4242 et131x_mii_write(adapter, PHY_DATA_REG,
4244 et131x_mii_write(adapter, PHY_MPHY_CONTROL_REG,
4248 /* Free the packets being actively sent & stopped */
4249 et131x_free_busy_send_packets(adapter);
4251 /* Re-initialize the send structures */
4252 et131x_init_send(adapter);
4255 * Bring the device back to the state it was during
4256 * init prior to autonegotiation being complete. This
4257 * way, when we get the auto-neg complete interrupt,
4258 * we can complete init by calling config_mac_regs2.
4260 et131x_soft_reset(adapter);
4262 /* Setup ET1310 as per the documentation */
4263 et131x_adapter_setup(adapter);
4265 /* perform reset of tx/rx */
4266 et131x_disable_txrx(netdev);
4267 et131x_enable_txrx(netdev);
4270 adapter->link = phydev->link;
4272 phy_print_status(phydev);
4276 static int et131x_mii_probe(struct net_device *netdev)
4278 struct et131x_adapter *adapter = netdev_priv(netdev);
4279 struct phy_device *phydev = NULL;
4281 phydev = phy_find_first(adapter->mii_bus);
4283 dev_err(&adapter->pdev->dev, "no PHY found\n");
4287 phydev = phy_connect(netdev, dev_name(&phydev->dev),
4288 &et131x_adjust_link, 0, PHY_INTERFACE_MODE_MII);
4290 if (IS_ERR(phydev)) {
4291 dev_err(&adapter->pdev->dev, "Could not attach to PHY\n");
4292 return PTR_ERR(phydev);
4295 phydev->supported &= (SUPPORTED_10baseT_Half
4296 | SUPPORTED_10baseT_Full
4297 | SUPPORTED_100baseT_Half
4298 | SUPPORTED_100baseT_Full
4303 if (adapter->pdev->device != ET131X_PCI_DEVICE_ID_FAST)
4304 phydev->supported |= SUPPORTED_1000baseT_Full;
4306 phydev->advertising = phydev->supported;
4307 adapter->phydev = phydev;
4309 dev_info(&adapter->pdev->dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
4310 phydev->drv->name, dev_name(&phydev->dev));
4316 * et131x_adapter_init
4317 * @adapter: pointer to the private adapter struct
4318 * @pdev: pointer to the PCI device
4320 * Initialize the data structures for the et131x_adapter object and link
4321 * them together with the platform provided device structures.
4323 static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev,
4324 struct pci_dev *pdev)
4326 static const u8 default_mac[] = { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 };
4328 struct et131x_adapter *adapter;
4330 /* Allocate private adapter struct and copy in relevant information */
4331 adapter = netdev_priv(netdev);
4332 adapter->pdev = pci_dev_get(pdev);
4333 adapter->netdev = netdev;
4335 /* Initialize spinlocks here */
4336 spin_lock_init(&adapter->lock);
4337 spin_lock_init(&adapter->tcb_send_qlock);
4338 spin_lock_init(&adapter->tcb_ready_qlock);
4339 spin_lock_init(&adapter->send_hw_lock);
4340 spin_lock_init(&adapter->rcv_lock);
4341 spin_lock_init(&adapter->rcv_pend_lock);
4342 spin_lock_init(&adapter->fbr_lock);
4343 spin_lock_init(&adapter->phy_lock);
4345 adapter->registry_jumbo_packet = 1514; /* 1514-9216 */
4347 /* Set the MAC address to a default */
4348 memcpy(adapter->addr, default_mac, ETH_ALEN);
4355 * @pdev: a pointer to the device's pci_dev structure
4357 * Registered in the pci_driver structure, this function is called when the
4358 * PCI subsystem detects that a PCI device which matches the information
4359 * contained in the pci_device_id table has been removed.
4361 static void __devexit et131x_pci_remove(struct pci_dev *pdev)
4363 struct net_device *netdev = pci_get_drvdata(pdev);
4364 struct et131x_adapter *adapter = netdev_priv(netdev);
4366 unregister_netdev(netdev);
4367 phy_disconnect(adapter->phydev);
4368 mdiobus_unregister(adapter->mii_bus);
4369 kfree(adapter->mii_bus->irq);
4370 mdiobus_free(adapter->mii_bus);
4372 et131x_adapter_memory_free(adapter);
4373 iounmap(adapter->regs);
4376 free_netdev(netdev);
4377 pci_release_regions(pdev);
4378 pci_disable_device(pdev);
4382 * et131x_up - Bring up a device for use.
4383 * @netdev: device to be opened
4385 static void et131x_up(struct net_device *netdev)
4387 struct et131x_adapter *adapter = netdev_priv(netdev);
4389 et131x_enable_txrx(netdev);
4390 phy_start(adapter->phydev);
4394 * et131x_down - Bring down the device
4395 * @netdev: device to be brought down
4397 static void et131x_down(struct net_device *netdev)
4399 struct et131x_adapter *adapter = netdev_priv(netdev);
4401 /* Save the timestamp for the TX watchdog, prevent a timeout */
4402 netdev->trans_start = jiffies;
4404 phy_stop(adapter->phydev);
4405 et131x_disable_txrx(netdev);
4408 #ifdef CONFIG_PM_SLEEP
4409 static int et131x_suspend(struct device *dev)
4411 struct pci_dev *pdev = to_pci_dev(dev);
4412 struct net_device *netdev = pci_get_drvdata(pdev);
4414 if (netif_running(netdev)) {
4415 netif_device_detach(netdev);
4416 et131x_down(netdev);
4417 pci_save_state(pdev);
4423 static int et131x_resume(struct device *dev)
4425 struct pci_dev *pdev = to_pci_dev(dev);
4426 struct net_device *netdev = pci_get_drvdata(pdev);
4428 if (netif_running(netdev)) {
4429 pci_restore_state(pdev);
4431 netif_device_attach(netdev);
4437 static SIMPLE_DEV_PM_OPS(et131x_pm_ops, et131x_suspend, et131x_resume);
4438 #define ET131X_PM_OPS (&et131x_pm_ops)
4440 #define ET131X_PM_OPS NULL
4444 * et131x_isr - The Interrupt Service Routine for the driver.
4445 * @irq: the IRQ on which the interrupt was received.
4446 * @dev_id: device-specific info (here a pointer to a net_device struct)
4448 * Returns a value indicating if the interrupt was handled.
4450 irqreturn_t et131x_isr(int irq, void *dev_id)
4452 bool handled = true;
4453 struct net_device *netdev = (struct net_device *)dev_id;
4454 struct et131x_adapter *adapter = NULL;
4457 if (!netif_device_present(netdev)) {
4462 adapter = netdev_priv(netdev);
4464 /* If the adapter is in low power state, then it should not
4465 * recognize any interrupt
4468 /* Disable Device Interrupts */
4469 et131x_disable_interrupts(adapter);
4471 /* Get a copy of the value in the interrupt status register
4472 * so we can process the interrupting section
4474 status = readl(&adapter->regs->global.int_status);
4476 if (adapter->flowcontrol == FLOW_TXONLY ||
4477 adapter->flowcontrol == FLOW_BOTH) {
4478 status &= ~INT_MASK_ENABLE;
4480 status &= ~INT_MASK_ENABLE_NO_FLOW;
4483 /* Make sure this is our interrupt */
4486 et131x_enable_interrupts(adapter);
4490 /* This is our interrupt, so process accordingly */
4492 if (status & ET_INTR_WATCHDOG) {
4493 struct tcb *tcb = adapter->tx_ring.send_head;
4496 if (++tcb->stale > 1)
4497 status |= ET_INTR_TXDMA_ISR;
4499 if (adapter->rx_ring.unfinished_receives)
4500 status |= ET_INTR_RXDMA_XFR_DONE;
4501 else if (tcb == NULL)
4502 writel(0, &adapter->regs->global.watchdog_timer);
4504 status &= ~ET_INTR_WATCHDOG;
4508 /* This interrupt has in some way been "handled" by
4509 * the ISR. Either it was a spurious Rx interrupt, or
4510 * it was a Tx interrupt that has been filtered by
4513 et131x_enable_interrupts(adapter);
4517 /* We need to save the interrupt status value for use in our
4518 * DPC. We will clear the software copy of that in that
4521 adapter->stats.interrupt_status = status;
4523 /* Schedule the ISR handler as a bottom-half task in the
4524 * kernel's tq_immediate queue, and mark the queue for
4527 schedule_work(&adapter->task);
4529 return IRQ_RETVAL(handled);
4533 * et131x_isr_handler - The ISR handler
4534 * @p_adapter, a pointer to the device's private adapter structure
4536 * scheduled to run in a deferred context by the ISR. This is where the ISR's
4537 * work actually gets done.
4539 static void et131x_isr_handler(struct work_struct *work)
4541 struct et131x_adapter *adapter =
4542 container_of(work, struct et131x_adapter, task);
4543 u32 status = adapter->stats.interrupt_status;
4544 struct address_map __iomem *iomem = adapter->regs;
4547 * These first two are by far the most common. Once handled, we clear
4548 * their two bits in the status word. If the word is now zero, we
4551 /* Handle all the completed Transmit interrupts */
4552 if (status & ET_INTR_TXDMA_ISR)
4553 et131x_handle_send_interrupt(adapter);
4555 /* Handle all the completed Receives interrupts */
4556 if (status & ET_INTR_RXDMA_XFR_DONE)
4557 et131x_handle_recv_interrupt(adapter);
4559 status &= 0xffffffd7;
4562 /* Handle the TXDMA Error interrupt */
4563 if (status & ET_INTR_TXDMA_ERR) {
4566 /* Following read also clears the register (COR) */
4567 txdma_err = readl(&iomem->txdma.tx_dma_error);
4569 dev_warn(&adapter->pdev->dev,
4570 "TXDMA_ERR interrupt, error = %d\n",
4574 /* Handle Free Buffer Ring 0 and 1 Low interrupt */
4576 (ET_INTR_RXDMA_FB_R0_LOW | ET_INTR_RXDMA_FB_R1_LOW)) {
4578 * This indicates the number of unused buffers in
4579 * RXDMA free buffer ring 0 is <= the limit you
4580 * programmed. Free buffer resources need to be
4581 * returned. Free buffers are consumed as packets
4582 * are passed from the network to the host. The host
4583 * becomes aware of the packets from the contents of
4584 * the packet status ring. This ring is queried when
4585 * the packet done interrupt occurs. Packets are then
4586 * passed to the OS. When the OS is done with the
4587 * packets the resources can be returned to the
4588 * ET1310 for re-use. This interrupt is one method of
4589 * returning resources.
4592 /* If the user has flow control on, then we will
4593 * send a pause packet, otherwise just exit
4595 if (adapter->flowcontrol == FLOW_TXONLY ||
4596 adapter->flowcontrol == FLOW_BOTH) {
4599 /* Tell the device to send a pause packet via
4600 * the back pressure register (bp req and
4603 pm_csr = readl(&iomem->global.pm_csr);
4604 if (!et1310_in_phy_coma(adapter))
4605 writel(3, &iomem->txmac.bp_ctrl);
4609 /* Handle Packet Status Ring Low Interrupt */
4610 if (status & ET_INTR_RXDMA_STAT_LOW) {
4613 * Same idea as with the two Free Buffer Rings.
4614 * Packets going from the network to the host each
4615 * consume a free buffer resource and a packet status
4616 * resource. These resoures are passed to the OS.
4617 * When the OS is done with the resources, they need
4618 * to be returned to the ET1310. This is one method
4619 * of returning the resources.
4623 /* Handle RXDMA Error Interrupt */
4624 if (status & ET_INTR_RXDMA_ERR) {
4626 * The rxdma_error interrupt is sent when a time-out
4627 * on a request issued by the JAGCore has occurred or
4628 * a completion is returned with an un-successful
4629 * status. In both cases the request is considered
4630 * complete. The JAGCore will automatically re-try the
4631 * request in question. Normally information on events
4632 * like these are sent to the host using the "Advanced
4633 * Error Reporting" capability. This interrupt is
4634 * another way of getting similar information. The
4635 * only thing required is to clear the interrupt by
4636 * reading the ISR in the global resources. The
4637 * JAGCore will do a re-try on the request. Normally
4638 * you should never see this interrupt. If you start
4639 * to see this interrupt occurring frequently then
4640 * something bad has occurred. A reset might be the
4645 dev_warn(&adapter->pdev->dev,
4646 "RxDMA_ERR interrupt, error %x\n",
4647 readl(&iomem->txmac.tx_test));
4650 /* Handle the Wake on LAN Event */
4651 if (status & ET_INTR_WOL) {
4653 * This is a secondary interrupt for wake on LAN.
4654 * The driver should never see this, if it does,
4655 * something serious is wrong. We will TRAP the
4656 * message when we are in DBG mode, otherwise we
4659 dev_err(&adapter->pdev->dev, "WAKE_ON_LAN interrupt\n");
4662 /* Let's move on to the TxMac */
4663 if (status & ET_INTR_TXMAC) {
4664 u32 err = readl(&iomem->txmac.err);
4667 * When any of the errors occur and TXMAC generates
4668 * an interrupt to report these errors, it usually
4669 * means that TXMAC has detected an error in the data
4670 * stream retrieved from the on-chip Tx Q. All of
4671 * these errors are catastrophic and TXMAC won't be
4672 * able to recover data when these errors occur. In
4673 * a nutshell, the whole Tx path will have to be reset
4674 * and re-configured afterwards.
4676 dev_warn(&adapter->pdev->dev,
4677 "TXMAC interrupt, error 0x%08x\n",
4680 /* If we are debugging, we want to see this error,
4681 * otherwise we just want the device to be reset and
4686 /* Handle RXMAC Interrupt */
4687 if (status & ET_INTR_RXMAC) {
4689 * These interrupts are catastrophic to the device,
4690 * what we need to do is disable the interrupts and
4691 * set the flag to cause us to reset so we can solve
4694 /* MP_SET_FLAG( adapter,
4695 fMP_ADAPTER_HARDWARE_ERROR); */
4697 dev_warn(&adapter->pdev->dev,
4698 "RXMAC interrupt, error 0x%08x. Requesting reset\n",
4699 readl(&iomem->rxmac.err_reg));
4701 dev_warn(&adapter->pdev->dev,
4702 "Enable 0x%08x, Diag 0x%08x\n",
4703 readl(&iomem->rxmac.ctrl),
4704 readl(&iomem->rxmac.rxq_diag));
4707 * If we are debugging, we want to see this error,
4708 * otherwise we just want the device to be reset and
4713 /* Handle MAC_STAT Interrupt */
4714 if (status & ET_INTR_MAC_STAT) {
4716 * This means at least one of the un-masked counters
4717 * in the MAC_STAT block has rolled over. Use this
4718 * to maintain the top, software managed bits of the
4721 et1310_handle_macstat_interrupt(adapter);
4724 /* Handle SLV Timeout Interrupt */
4725 if (status & ET_INTR_SLV_TIMEOUT) {
4727 * This means a timeout has occurred on a read or
4728 * write request to one of the JAGCore registers. The
4729 * Global Resources block has terminated the request
4730 * and on a read request, returned a "fake" value.
4731 * The most likely reasons are: Bad Address or the
4732 * addressed module is in a power-down state and
4737 et131x_enable_interrupts(adapter);
4741 * et131x_stats - Return the current device statistics.
4742 * @netdev: device whose stats are being queried
4744 * Returns 0 on success, errno on failure (as defined in errno.h)
4746 static struct net_device_stats *et131x_stats(struct net_device *netdev)
4748 struct et131x_adapter *adapter = netdev_priv(netdev);
4749 struct net_device_stats *stats = &adapter->net_stats;
4750 struct ce_stats *devstat = &adapter->stats;
4752 stats->rx_errors = devstat->rx_length_errs +
4753 devstat->rx_align_errs +
4754 devstat->rx_crc_errs +
4755 devstat->rx_code_violations +
4756 devstat->rx_other_errs;
4757 stats->tx_errors = devstat->tx_max_pkt_errs;
4758 stats->multicast = devstat->multicast_pkts_rcvd;
4759 stats->collisions = devstat->tx_collisions;
4761 stats->rx_length_errors = devstat->rx_length_errs;
4762 stats->rx_over_errors = devstat->rx_overflows;
4763 stats->rx_crc_errors = devstat->rx_crc_errs;
4765 /* NOTE: These stats don't have corresponding values in CE_STATS,
4766 * so we're going to have to update these directly from within the
4769 /* stats->rx_bytes = 20; devstat->; */
4770 /* stats->tx_bytes = 20; devstat->; */
4771 /* stats->rx_dropped = devstat->; */
4772 /* stats->tx_dropped = devstat->; */
4774 /* NOTE: Not used, can't find analogous statistics */
4775 /* stats->rx_frame_errors = devstat->; */
4776 /* stats->rx_fifo_errors = devstat->; */
4777 /* stats->rx_missed_errors = devstat->; */
4779 /* stats->tx_aborted_errors = devstat->; */
4780 /* stats->tx_carrier_errors = devstat->; */
4781 /* stats->tx_fifo_errors = devstat->; */
4782 /* stats->tx_heartbeat_errors = devstat->; */
4783 /* stats->tx_window_errors = devstat->; */
4788 * et131x_open - Open the device for use.
4789 * @netdev: device to be opened
4791 * Returns 0 on success, errno on failure (as defined in errno.h)
4793 static int et131x_open(struct net_device *netdev)
4795 struct et131x_adapter *adapter = netdev_priv(netdev);
4796 struct pci_dev *pdev = adapter->pdev;
4797 unsigned int irq = pdev->irq;
4800 /* Start the timer to track NIC errors */
4801 init_timer(&adapter->error_timer);
4802 adapter->error_timer.expires = jiffies + TX_ERROR_PERIOD * HZ / 1000;
4803 adapter->error_timer.function = et131x_error_timer_handler;
4804 adapter->error_timer.data = (unsigned long)adapter;
4805 add_timer(&adapter->error_timer);
4807 result = request_irq(irq, et131x_isr,
4808 IRQF_SHARED, netdev->name, netdev);
4810 dev_err(&pdev->dev, "could not register IRQ %d\n", irq);
4814 adapter->flags |= fMP_ADAPTER_INTERRUPT_IN_USE;
4822 * et131x_close - Close the device
4823 * @netdev: device to be closed
4825 * Returns 0 on success, errno on failure (as defined in errno.h)
4827 static int et131x_close(struct net_device *netdev)
4829 struct et131x_adapter *adapter = netdev_priv(netdev);
4831 et131x_down(netdev);
4833 adapter->flags &= ~fMP_ADAPTER_INTERRUPT_IN_USE;
4834 free_irq(adapter->pdev->irq, netdev);
4836 /* Stop the error timer */
4837 return del_timer_sync(&adapter->error_timer);
4841 * et131x_ioctl - The I/O Control handler for the driver
4842 * @netdev: device on which the control request is being made
4843 * @reqbuf: a pointer to the IOCTL request buffer
4844 * @cmd: the IOCTL command code
4846 * Returns 0 on success, errno on failure (as defined in errno.h)
4848 static int et131x_ioctl(struct net_device *netdev, struct ifreq *reqbuf,
4851 struct et131x_adapter *adapter = netdev_priv(netdev);
4853 if (!adapter->phydev)
4856 return phy_mii_ioctl(adapter->phydev, reqbuf, cmd);
4860 * et131x_set_packet_filter - Configures the Rx Packet filtering on the device
4861 * @adapter: pointer to our private adapter structure
4863 * FIXME: lot of dups with MAC code
4865 * Returns 0 on success, errno on failure
4867 static int et131x_set_packet_filter(struct et131x_adapter *adapter)
4869 int filter = adapter->packet_filter;
4874 ctrl = readl(&adapter->regs->rxmac.ctrl);
4875 pf_ctrl = readl(&adapter->regs->rxmac.pf_ctrl);
4877 /* Default to disabled packet filtering. Enable it in the individual
4878 * case statements that require the device to filter something
4882 /* Set us to be in promiscuous mode so we receive everything, this
4883 * is also true when we get a packet filter of 0
4885 if ((filter & ET131X_PACKET_TYPE_PROMISCUOUS) || filter == 0)
4886 pf_ctrl &= ~7; /* Clear filter bits */
4889 * Set us up with Multicast packet filtering. Three cases are
4890 * possible - (1) we have a multi-cast list, (2) we receive ALL
4891 * multicast entries or (3) we receive none.
4893 if (filter & ET131X_PACKET_TYPE_ALL_MULTICAST)
4894 pf_ctrl &= ~2; /* Multicast filter bit */
4896 et1310_setup_device_for_multicast(adapter);
4901 /* Set us up with Unicast packet filtering */
4902 if (filter & ET131X_PACKET_TYPE_DIRECTED) {
4903 et1310_setup_device_for_unicast(adapter);
4908 /* Set us up with Broadcast packet filtering */
4909 if (filter & ET131X_PACKET_TYPE_BROADCAST) {
4910 pf_ctrl |= 1; /* Broadcast filter bit */
4915 /* Setup the receive mac configuration registers - Packet
4916 * Filter control + the enable / disable for packet filter
4917 * in the control reg.
4919 writel(pf_ctrl, &adapter->regs->rxmac.pf_ctrl);
4920 writel(ctrl, &adapter->regs->rxmac.ctrl);
4926 * et131x_multicast - The handler to configure multicasting on the interface
4927 * @netdev: a pointer to a net_device struct representing the device
4929 static void et131x_multicast(struct net_device *netdev)
4931 struct et131x_adapter *adapter = netdev_priv(netdev);
4933 unsigned long flags;
4934 struct netdev_hw_addr *ha;
4937 spin_lock_irqsave(&adapter->lock, flags);
4939 /* Before we modify the platform-independent filter flags, store them
4940 * locally. This allows us to determine if anything's changed and if
4941 * we even need to bother the hardware
4943 packet_filter = adapter->packet_filter;
4945 /* Clear the 'multicast' flag locally; because we only have a single
4946 * flag to check multicast, and multiple multicast addresses can be
4947 * set, this is the easiest way to determine if more than one
4948 * multicast address is being set.
4950 packet_filter &= ~ET131X_PACKET_TYPE_MULTICAST;
4952 /* Check the net_device flags and set the device independent flags
4956 if (netdev->flags & IFF_PROMISC)
4957 adapter->packet_filter |= ET131X_PACKET_TYPE_PROMISCUOUS;
4959 adapter->packet_filter &= ~ET131X_PACKET_TYPE_PROMISCUOUS;
4961 if (netdev->flags & IFF_ALLMULTI)
4962 adapter->packet_filter |= ET131X_PACKET_TYPE_ALL_MULTICAST;
4964 if (netdev_mc_count(netdev) > NIC_MAX_MCAST_LIST)
4965 adapter->packet_filter |= ET131X_PACKET_TYPE_ALL_MULTICAST;
4967 if (netdev_mc_count(netdev) < 1) {
4968 adapter->packet_filter &= ~ET131X_PACKET_TYPE_ALL_MULTICAST;
4969 adapter->packet_filter &= ~ET131X_PACKET_TYPE_MULTICAST;
4971 adapter->packet_filter |= ET131X_PACKET_TYPE_MULTICAST;
4973 /* Set values in the private adapter struct */
4975 netdev_for_each_mc_addr(ha, netdev) {
4976 if (i == NIC_MAX_MCAST_LIST)
4978 memcpy(adapter->multicast_list[i++], ha->addr, ETH_ALEN);
4980 adapter->multicast_addr_count = i;
4982 /* Are the new flags different from the previous ones? If not, then no
4983 * action is required
4985 * NOTE - This block will always update the multicast_list with the
4986 * hardware, even if the addresses aren't the same.
4988 if (packet_filter != adapter->packet_filter) {
4989 /* Call the device's filter function */
4990 et131x_set_packet_filter(adapter);
4992 spin_unlock_irqrestore(&adapter->lock, flags);
4996 * et131x_tx - The handler to tx a packet on the device
4997 * @skb: data to be Tx'd
4998 * @netdev: device on which data is to be Tx'd
5000 * Returns 0 on success, errno on failure (as defined in errno.h)
5002 static int et131x_tx(struct sk_buff *skb, struct net_device *netdev)
5005 struct et131x_adapter *adapter = netdev_priv(netdev);
5007 /* stop the queue if it's getting full */
5008 if (adapter->tx_ring.used >= NUM_TCB - 1 &&
5009 !netif_queue_stopped(netdev))
5010 netif_stop_queue(netdev);
5012 /* Save the timestamp for the TX timeout watchdog */
5013 netdev->trans_start = jiffies;
5015 /* Call the device-specific data Tx routine */
5016 status = et131x_send_packets(skb, netdev);
5018 /* Check status and manage the netif queue if necessary */
5020 if (status == -ENOMEM)
5021 status = NETDEV_TX_BUSY;
5023 status = NETDEV_TX_OK;
5029 * et131x_tx_timeout - Timeout handler
5030 * @netdev: a pointer to a net_device struct representing the device
5032 * The handler called when a Tx request times out. The timeout period is
5033 * specified by the 'tx_timeo" element in the net_device structure (see
5034 * et131x_alloc_device() to see how this value is set).
5036 static void et131x_tx_timeout(struct net_device *netdev)
5038 struct et131x_adapter *adapter = netdev_priv(netdev);
5040 unsigned long flags;
5042 /* If the device is closed, ignore the timeout */
5043 if (~(adapter->flags & fMP_ADAPTER_INTERRUPT_IN_USE))
5046 /* Any nonrecoverable hardware error?
5047 * Checks adapter->flags for any failure in phy reading
5049 if (adapter->flags & fMP_ADAPTER_NON_RECOVER_ERROR)
5052 /* Hardware failure? */
5053 if (adapter->flags & fMP_ADAPTER_HARDWARE_ERROR) {
5054 dev_err(&adapter->pdev->dev, "hardware error - reset\n");
5058 /* Is send stuck? */
5059 spin_lock_irqsave(&adapter->tcb_send_qlock, flags);
5061 tcb = adapter->tx_ring.send_head;
5066 if (tcb->count > NIC_SEND_HANG_THRESHOLD) {
5067 spin_unlock_irqrestore(&adapter->tcb_send_qlock,
5070 dev_warn(&adapter->pdev->dev,
5071 "Send stuck - reset. tcb->WrIndex %x, flags 0x%08x\n",
5075 adapter->net_stats.tx_errors++;
5077 /* perform reset of tx/rx */
5078 et131x_disable_txrx(netdev);
5079 et131x_enable_txrx(netdev);
5084 spin_unlock_irqrestore(&adapter->tcb_send_qlock, flags);
5088 * et131x_change_mtu - The handler called to change the MTU for the device
5089 * @netdev: device whose MTU is to be changed
5090 * @new_mtu: the desired MTU
5092 * Returns 0 on success, errno on failure (as defined in errno.h)
5094 static int et131x_change_mtu(struct net_device *netdev, int new_mtu)
5097 struct et131x_adapter *adapter = netdev_priv(netdev);
5099 /* Make sure the requested MTU is valid */
5100 if (new_mtu < 64 || new_mtu > 9216)
5103 et131x_disable_txrx(netdev);
5104 et131x_handle_send_interrupt(adapter);
5105 et131x_handle_recv_interrupt(adapter);
5107 /* Set the new MTU */
5108 netdev->mtu = new_mtu;
5110 /* Free Rx DMA memory */
5111 et131x_adapter_memory_free(adapter);
5113 /* Set the config parameter for Jumbo Packet support */
5114 adapter->registry_jumbo_packet = new_mtu + 14;
5115 et131x_soft_reset(adapter);
5117 /* Alloc and init Rx DMA memory */
5118 result = et131x_adapter_memory_alloc(adapter);
5120 dev_warn(&adapter->pdev->dev,
5121 "Change MTU failed; couldn't re-alloc DMA memory\n");
5125 et131x_init_send(adapter);
5127 et131x_hwaddr_init(adapter);
5128 memcpy(netdev->dev_addr, adapter->addr, ETH_ALEN);
5130 /* Init the device with the new settings */
5131 et131x_adapter_setup(adapter);
5133 et131x_enable_txrx(netdev);
5139 * et131x_set_mac_addr - handler to change the MAC address for the device
5140 * @netdev: device whose MAC is to be changed
5141 * @new_mac: the desired MAC address
5143 * Returns 0 on success, errno on failure (as defined in errno.h)
5145 * IMPLEMENTED BY : blux http://berndlux.de 22.01.2007 21:14
5147 static int et131x_set_mac_addr(struct net_device *netdev, void *new_mac)
5150 struct et131x_adapter *adapter = netdev_priv(netdev);
5151 struct sockaddr *address = new_mac;
5155 if (adapter == NULL)
5158 /* Make sure the requested MAC is valid */
5159 if (!is_valid_ether_addr(address->sa_data))
5160 return -EADDRNOTAVAIL;
5162 et131x_disable_txrx(netdev);
5163 et131x_handle_send_interrupt(adapter);
5164 et131x_handle_recv_interrupt(adapter);
5166 /* Set the new MAC */
5167 /* netdev->set_mac_address = &new_mac; */
5169 memcpy(netdev->dev_addr, address->sa_data, netdev->addr_len);
5171 netdev_info(netdev, "Setting MAC address to %pM\n",
5174 /* Free Rx DMA memory */
5175 et131x_adapter_memory_free(adapter);
5177 et131x_soft_reset(adapter);
5179 /* Alloc and init Rx DMA memory */
5180 result = et131x_adapter_memory_alloc(adapter);
5182 dev_err(&adapter->pdev->dev,
5183 "Change MAC failed; couldn't re-alloc DMA memory\n");
5187 et131x_init_send(adapter);
5189 et131x_hwaddr_init(adapter);
5191 /* Init the device with the new settings */
5192 et131x_adapter_setup(adapter);
5194 et131x_enable_txrx(netdev);
5199 static const struct net_device_ops et131x_netdev_ops = {
5200 .ndo_open = et131x_open,
5201 .ndo_stop = et131x_close,
5202 .ndo_start_xmit = et131x_tx,
5203 .ndo_set_rx_mode = et131x_multicast,
5204 .ndo_tx_timeout = et131x_tx_timeout,
5205 .ndo_change_mtu = et131x_change_mtu,
5206 .ndo_set_mac_address = et131x_set_mac_addr,
5207 .ndo_validate_addr = eth_validate_addr,
5208 .ndo_get_stats = et131x_stats,
5209 .ndo_do_ioctl = et131x_ioctl,
5213 * et131x_pci_setup - Perform device initialization
5214 * @pdev: a pointer to the device's pci_dev structure
5215 * @ent: this device's entry in the pci_device_id table
5217 * Returns 0 on success, errno on failure (as defined in errno.h)
5219 * Registered in the pci_driver structure, this function is called when the
5220 * PCI subsystem finds a new PCI device which matches the information
5221 * contained in the pci_device_id table. This routine is the equivalent to
5222 * a device insertion routine.
5224 static int __devinit et131x_pci_setup(struct pci_dev *pdev,
5225 const struct pci_device_id *ent)
5227 struct net_device *netdev;
5228 struct et131x_adapter *adapter;
5232 rc = pci_enable_device(pdev);
5234 dev_err(&pdev->dev, "pci_enable_device() failed\n");
5238 /* Perform some basic PCI checks */
5239 if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
5240 dev_err(&pdev->dev, "Can't find PCI device's base address\n");
5245 rc = pci_request_regions(pdev, DRIVER_NAME);
5247 dev_err(&pdev->dev, "Can't get PCI resources\n");
5251 pci_set_master(pdev);
5253 /* Check the DMA addressing support of this device */
5254 if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
5255 rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
5258 "Unable to obtain 64 bit DMA for consistent allocations\n");
5259 goto err_release_res;
5261 } else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
5262 rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
5265 "Unable to obtain 32 bit DMA for consistent allocations\n");
5266 goto err_release_res;
5269 dev_err(&pdev->dev, "No usable DMA addressing method\n");
5271 goto err_release_res;
5274 /* Allocate netdev and private adapter structs */
5275 netdev = alloc_etherdev(sizeof(struct et131x_adapter));
5277 dev_err(&pdev->dev, "Couldn't alloc netdev struct\n");
5279 goto err_release_res;
5282 netdev->watchdog_timeo = ET131X_TX_TIMEOUT;
5283 netdev->netdev_ops = &et131x_netdev_ops;
5285 SET_NETDEV_DEV(netdev, &pdev->dev);
5286 SET_ETHTOOL_OPS(netdev, &et131x_ethtool_ops);
5288 adapter = et131x_adapter_init(netdev, pdev);
5290 rc = et131x_pci_init(adapter, pdev);
5294 /* Map the bus-relative registers to system virtual memory */
5295 adapter->regs = pci_ioremap_bar(pdev, 0);
5296 if (!adapter->regs) {
5297 dev_err(&pdev->dev, "Cannot map device registers\n");
5302 /* If Phy COMA mode was enabled when we went down, disable it here. */
5303 writel(ET_PMCSR_INIT, &adapter->regs->global.pm_csr);
5305 /* Issue a global reset to the et1310 */
5306 et131x_soft_reset(adapter);
5308 /* Disable all interrupts (paranoid) */
5309 et131x_disable_interrupts(adapter);
5311 /* Allocate DMA memory */
5312 rc = et131x_adapter_memory_alloc(adapter);
5314 dev_err(&pdev->dev, "Could not alloc adapater memory (DMA)\n");
5318 /* Init send data structures */
5319 et131x_init_send(adapter);
5321 /* Set up the task structure for the ISR's deferred handler */
5322 INIT_WORK(&adapter->task, et131x_isr_handler);
5324 /* Copy address into the net_device struct */
5325 memcpy(netdev->dev_addr, adapter->addr, ETH_ALEN);
5327 /* Init variable for counting how long we do not have link status */
5328 adapter->boot_coma = 0;
5329 et1310_disable_phy_coma(adapter);
5333 /* Setup the mii_bus struct */
5334 adapter->mii_bus = mdiobus_alloc();
5335 if (!adapter->mii_bus) {
5336 dev_err(&pdev->dev, "Alloc of mii_bus struct failed\n");
5340 adapter->mii_bus->name = "et131x_eth_mii";
5341 snprintf(adapter->mii_bus->id, MII_BUS_ID_SIZE, "%x",
5342 (adapter->pdev->bus->number << 8) | adapter->pdev->devfn);
5343 adapter->mii_bus->priv = netdev;
5344 adapter->mii_bus->read = et131x_mdio_read;
5345 adapter->mii_bus->write = et131x_mdio_write;
5346 adapter->mii_bus->reset = et131x_mdio_reset;
5347 adapter->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
5348 if (!adapter->mii_bus->irq) {
5349 dev_err(&pdev->dev, "mii_bus irq allocation failed\n");
5353 for (ii = 0; ii < PHY_MAX_ADDR; ii++)
5354 adapter->mii_bus->irq[ii] = PHY_POLL;
5356 rc = mdiobus_register(adapter->mii_bus);
5358 dev_err(&pdev->dev, "failed to register MII bus\n");
5359 goto err_mdio_free_irq;
5362 rc = et131x_mii_probe(netdev);
5364 dev_err(&pdev->dev, "failed to probe MII bus\n");
5365 goto err_mdio_unregister;
5368 /* Setup et1310 as per the documentation */
5369 et131x_adapter_setup(adapter);
5371 /* We can enable interrupts now
5373 * NOTE - Because registration of interrupt handler is done in the
5374 * device's open(), defer enabling device interrupts to that
5378 /* Register the net_device struct with the Linux network layer */
5379 rc = register_netdev(netdev);
5381 dev_err(&pdev->dev, "register_netdev() failed\n");
5382 goto err_phy_disconnect;
5385 /* Register the net_device struct with the PCI subsystem. Save a copy
5386 * of the PCI config space for this device now that the device has
5387 * been initialized, just in case it needs to be quickly restored.
5389 pci_set_drvdata(pdev, netdev);
5394 phy_disconnect(adapter->phydev);
5395 err_mdio_unregister:
5396 mdiobus_unregister(adapter->mii_bus);
5398 kfree(adapter->mii_bus->irq);
5400 mdiobus_free(adapter->mii_bus);
5402 et131x_adapter_memory_free(adapter);
5404 iounmap(adapter->regs);
5407 free_netdev(netdev);
5409 pci_release_regions(pdev);
5411 pci_disable_device(pdev);
5415 static DEFINE_PCI_DEVICE_TABLE(et131x_pci_table) = {
5416 { PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_GIG), 0UL},
5417 { PCI_VDEVICE(ATT, ET131X_PCI_DEVICE_ID_FAST), 0UL},
5420 MODULE_DEVICE_TABLE(pci, et131x_pci_table);
5422 static struct pci_driver et131x_driver = {
5423 .name = DRIVER_NAME,
5424 .id_table = et131x_pci_table,
5425 .probe = et131x_pci_setup,
5426 .remove = __devexit_p(et131x_pci_remove),
5427 .driver.pm = ET131X_PM_OPS,
5430 module_pci_driver(et131x_driver);