2 tristate "Data acquisition support (comedi)"
5 depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86
7 Enable support a wide range of data acquisition devices
11 bool "Comedi debugging"
12 depends on COMEDI != n
14 This is an option for use by developers; most people should
15 say N here. This enables comedi core and driver debugging.
17 menuconfig COMEDI_MISC_DRIVERS
18 tristate "Comedi misc drivers"
22 Enable comedi misc drivers to be built
24 Note that the answer to this question won't directly affect the
25 kernel: saying N will just cause the configurator to skip all
26 the questions about misc non-hardware comedi drivers.
28 if COMEDI_MISC_DRIVERS
30 config COMEDI_KCOMEDILIB
31 tristate "Comedi kcomedilib"
36 tristate "Device bonding support"
37 depends on COMEDI_KCOMEDILIB
40 Enable support for a driver to 'bond' (merge) multiple subdevices
41 from multiple devices together as one.
43 To compile this driver as a module, choose M here: the module will be
47 tristate "Fake waveform generator support"
51 Enable support for the fake waveform generator.
52 This driver is mainly for testing purposes, but can also be used to
53 generate sample waveforms on systems that don't have data acquisition
56 To compile this driver as a module, choose M here: the module will be
60 tristate "Parallel port support"
63 Enable support for the standard parallel port.
64 A cheap and easy way to get a few more digital I/O lines. Steal
65 additional parallel ports from old computers or your neighbors'
68 To compile this driver as a module, choose M here: the module will be
69 called comedi_parport.
71 config COMEDI_SERIAL2002
72 tristate "Driver for serial connected hardware"
75 Enable support for serial connected hardware
77 To compile this driver as a module, choose M here: the module will be
81 tristate "Comedi skeleton driver"
84 Build the Skeleton driver, an example for driver writers
86 To compile this driver as a module, choose M here: the module will be
89 endif # COMEDI_MISC_DRIVERS
91 menuconfig COMEDI_ISA_DRIVERS
92 tristate "Comedi ISA and PC/104 drivers"
93 depends on COMEDI && ISA
96 Enable comedi ISA and PC/104 drivers to be built
98 Note that the answer to this question won't directly affect the
99 kernel: saying N will just cause the configurator to skip all
100 the questions about ISA and PC/104 comedi drivers.
102 if COMEDI_ISA_DRIVERS && ISA
104 config COMEDI_ACL7225B
105 tristate "ADlink NuDAQ ACL-7225b and compatibles support"
108 Enable support for ADlink NuDAQ ACL-7225b and compatibles,
109 ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio)
111 To compile this driver as a module, choose M here: the module will be
115 tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
118 Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
120 To compile this driver as a module, choose M here: the module will be
124 tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
128 Enable support for Advantech PCL-724, PCL-722, PCL-731 and
129 ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards
131 To compile this driver as a module, choose M here: the module will be
135 tristate "Advantech PCL-725 and compatible ISA card support"
138 Enable support for Advantech PCL-725 and compatible ISA cards.
140 To compile this driver as a module, choose M here: the module will be
144 tristate "Advantech PCL-726 and compatible ISA card support"
147 Enable support for Advantech PCL-726 and compatible ISA cards.
149 To compile this driver as a module, choose M here: the module will be
153 tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support"
156 Enable support for Advantech PCL-730, ICP ISO-730 and ADlink
159 To compile this driver as a module, choose M here: the module will be
163 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
164 depends on VIRT_TO_BUS
167 Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
168 ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
169 A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
171 To compile this driver as a module, choose M here: the module will be
175 tristate "Advantech PCL-814 and PCL-816 ISA card support"
176 depends on VIRT_TO_BUS
179 Enable support for Advantech PCL-814 and PCL-816 ISA cards
181 To compile this driver as a module, choose M here: the module will be
185 tristate "Advantech PCL-718 and PCL-818 ISA card support"
186 depends on VIRT_TO_BUS
189 Enable support for Advantech PCL-818 ISA cards
190 PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
192 To compile this driver as a module, choose M here: the module will be
195 config COMEDI_PCM3724
196 tristate "Advantech PCM-3724 PC/104 card support"
200 Enable support for Advantech PCM-3724 PC/104 cards.
202 To compile this driver as a module, choose M here: the module will be
205 config COMEDI_PCM3730
206 tristate "Advantech PCM-3730 and clone PC/104 board support"
209 Enable support for Advantech PCM-3730 and clone PC/104 boards
211 To compile this driver as a module, choose M here: the module will be
215 tristate "Analog Devices RTI-800/815 ISA card support"
218 Enable support for Analog Devices RTI-800/815 ISA cards
220 To compile this driver as a module, choose M here: the module will be
224 tristate "Analog Devices RTI-802 ISA card support"
227 Enable support for Analog Devices RTI-802 ISA cards
229 To compile this driver as a module, choose M here: the module will be
232 config COMEDI_DAS16M1
233 tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
238 Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
240 To compile this driver as a module, choose M here: the module will be
244 tristate "DAS-16 compatible ISA and PC/104 card support"
249 Enable support for Keithley Metrabyte/ComputerBoards DAS16
250 and compatible ISA and PC/104 cards:
251 Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
252 DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
253 ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
254 PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
255 CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
256 CIO-DAS1602/16, CIO-DAS16/330
258 To compile this driver as a module, choose M here: the module will be
262 tristate "DAS800 and compatible ISA card support"
266 Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
267 Keithley Metrabyte DAS-800, DAS-801, DAS-802
268 Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
271 To compile this driver as a module, choose M here: the module will be
274 config COMEDI_DAS1800
275 tristate "DAS1800 and compatible ISA card support"
276 depends on VIRT_TO_BUS
280 Enable support for DAS1800 and compatible ISA cards
281 Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
282 DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
283 DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
284 DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
287 To compile this driver as a module, choose M here: the module will be
290 config COMEDI_DAS6402
291 tristate "DAS6402 and compatible ISA card support"
294 Enable support for DAS6402 and compatible ISA cards
295 Computerboards, Keithley Metrabyte DAS6402 and compatibles
297 To compile this driver as a module, choose M here: the module will be
301 tristate "Data Translation DT2801 ISA card support"
304 Enable support for Data Translation DT2801 ISA cards
306 To compile this driver as a module, choose M here: the module will be
310 tristate "Data Translation DT2811 ISA card support"
313 Enable support for Data Translation DT2811 ISA cards
315 To compile this driver as a module, choose M here: the module will be
319 tristate "Data Translation DT2814 ISA card support"
322 Enable support for Data Translation DT2814 ISA cards
324 To compile this driver as a module, choose M here: the module will be
328 tristate "Data Translation DT2815 ISA card support"
331 Enable support for Data Translation DT2815 ISA cards
333 To compile this driver as a module, choose M here: the module will be
337 tristate "Data Translation DT2817 ISA card support"
340 Enable support for Data Translation DT2817 ISA cards
342 To compile this driver as a module, choose M here: the module will be
346 tristate "Data Translation DT2821 series and DT-EZ ISA card support"
348 depends on VIRT_TO_BUS
351 Enable support for Data Translation DT2821 series including DT-EZ
352 DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
353 DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
354 DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
356 To compile this driver as a module, choose M here: the module will be
359 config COMEDI_DMM32AT
360 tristate "Diamond Systems MM-32-AT PC/104 board support"
363 Enable support for Diamond Systems MM-32-AT PC/104 boards
365 To compile this driver as a module, choose M here: the module will be
369 tristate "FL512 ISA card support"
372 Enable support for FL512 ISA card
374 To compile this driver as a module, choose M here: the module will be
377 config COMEDI_AIO_AIO12_8
378 tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
382 Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
384 To compile this driver as a module, choose M here: the module will be
387 config COMEDI_AIO_IIRO_16
388 tristate "I/O Products PC/104 IIRO16 Board support"
391 Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
394 To compile this driver as a module, choose M here: the module will be
397 config COMEDI_C6XDIGIO
398 tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
401 Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
404 To compile this driver as a module, choose M here: the module will be
408 tristate "Micro/sys MPC-624 PC/104 board support"
411 Enable support for Micro/sys MPC-624 PC/104 board
413 To compile this driver as a module, choose M here: the module will be
417 tristate "MicroAxial ADQ12-B data acquisition and control card support"
420 Enable MicroAxial ADQ12-B daq and control card support.
422 To compile this driver as a module, choose M here: the module will be
425 config COMEDI_NI_AT_A2150
426 tristate "NI AT-A2150 ISA card support"
427 depends on COMEDI_NI_COMMON
428 depends on VIRT_TO_BUS
431 Enable support for National Instruments AT-A2150 cards
433 To compile this driver as a module, choose M here: the module will be
436 config COMEDI_NI_AT_AO
437 tristate "NI AT-AO-6/10 EISA card support"
438 depends on COMEDI_NI_COMMON
441 Enable support for National Instruments AT-AO-6/10 cards
443 To compile this driver as a module, choose M here: the module will be
446 config COMEDI_NI_ATMIO
447 tristate "NI AT-MIO E series ISA-PNP card support"
448 depends on ISAPNP && COMEDI_NI_TIO && COMEDI_NI_COMMON
452 Enable support for National Instruments AT-MIO E series cards
453 National Instruments AT-MIO-16E-1 (ni_atmio),
454 AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
455 AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
457 To compile this driver as a module, choose M here: the module will be
460 config COMEDI_NI_ATMIO16D
461 tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
462 depends on ISAPNP && COMEDI_NI_COMMON
466 Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
468 To compile this driver as a module, choose M here: the module will be
472 tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
475 Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
477 To compile this driver as a module, choose M here: the module will be
480 config COMEDI_PCMDA12
481 tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
484 Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
485 Note that the board is not ISA-PNP capable and thus needs the I/O
486 port comedi_config parameter.
488 To compile this driver as a module, choose M here: the module will be
492 tristate "Winsystems PCM-MIO PC/104 board support"
495 Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
497 To compile this driver as a module, choose M here: the module will be
501 tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
504 Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
506 To compile this driver as a module, choose M here: the module will be
509 config COMEDI_MULTIQ3
510 tristate "Quanser Consulting MultiQ-3 ISA card support"
513 Enable support for Quanser Consulting MultiQ-3 ISA cards
515 To compile this driver as a module, choose M here: the module will be
519 tristate "Generic driver for very simple devices"
522 Enable generic support for very simple / POC (Piece of Crap) boards,
523 Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and
526 To compile this driver as a module, choose M here: the module will be
529 endif # COMEDI_ISA_DRIVERS
531 menuconfig COMEDI_PCI_DRIVERS
532 tristate "Comedi PCI drivers"
533 depends on COMEDI && PCI
536 Enable comedi PCI drivers to be built
538 Note that the answer to this question won't directly affect the
539 kernel: saying N will just cause the configurator to skip all
540 the questions about PCI comedi drivers.
542 if COMEDI_PCI_DRIVERS && PCI
544 config COMEDI_ADDI_APCI_035
545 tristate "ADDI-DATA APCI_035 support"
546 depends on VIRT_TO_BUS
549 Enable support for ADDI-DATA APCI_035 cards
551 To compile this driver as a module, choose M here: the module will be
552 called addi_apci_035.
554 config COMEDI_ADDI_APCI_1032
555 tristate "ADDI-DATA APCI_1032 support"
556 depends on VIRT_TO_BUS
559 Enable support for ADDI-DATA APCI_1032 cards
561 To compile this driver as a module, choose M here: the module will be
562 called addi_apci_1032.
564 config COMEDI_ADDI_APCI_1500
565 tristate "ADDI-DATA APCI_1500 support"
566 depends on VIRT_TO_BUS
569 Enable support for ADDI-DATA APCI_1500 cards
571 To compile this driver as a module, choose M here: the module will be
572 called addi_apci_1500.
574 config COMEDI_ADDI_APCI_1516
575 tristate "ADDI-DATA APCI_1516 support"
576 depends on VIRT_TO_BUS
579 Enable support for ADDI-DATA APCI_1516 cards
581 To compile this driver as a module, choose M here: the module will be
582 called addi_apci_1516.
584 config COMEDI_ADDI_APCI_1564
585 tristate "ADDI-DATA APCI_1564 support"
586 depends on VIRT_TO_BUS
589 Enable support for ADDI-DATA APCI_1564 cards
591 To compile this driver as a module, choose M here: the module will be
592 called addi_apci_1564.
594 config COMEDI_ADDI_APCI_16XX
595 tristate "ADDI-DATA APCI_16xx support"
596 depends on VIRT_TO_BUS
599 Enable support for ADDI-DATA APCI_16xx cards
601 To compile this driver as a module, choose M here: the module will be
602 called addi_apci_16xx.
604 config COMEDI_ADDI_APCI_2016
605 tristate "ADDI-DATA APCI_2016 support"
606 depends on VIRT_TO_BUS
609 Enable support for ADDI-DATA APCI_2016 cards
611 To compile this driver as a module, choose M here: the module will be
612 called addi_apci_2016.
614 config COMEDI_ADDI_APCI_2032
615 tristate "ADDI-DATA APCI_2032 support"
616 depends on VIRT_TO_BUS
619 Enable support for ADDI-DATA APCI_2032 cards
621 To compile this driver as a module, choose M here: the module will be
622 called addi_apci_2032.
624 config COMEDI_ADDI_APCI_2200
625 tristate "ADDI-DATA APCI_2200 support"
626 depends on VIRT_TO_BUS
629 Enable support for ADDI-DATA APCI_2200 cards
631 To compile this driver as a module, choose M here: the module will be
632 called addi_apci_2200.
634 config COMEDI_ADDI_APCI_3001
635 tristate "ADDI-DATA APCI_3001 support"
636 depends on VIRT_TO_BUS
640 Enable support for ADDI-DATA APCI_3001 cards
642 To compile this driver as a module, choose M here: the module will be
643 called addi_apci_3001.
645 config COMEDI_ADDI_APCI_3120
646 tristate "ADDI-DATA APCI_3520 support"
647 depends on VIRT_TO_BUS
651 Enable support for ADDI-DATA APCI_3520 cards
653 To compile this driver as a module, choose M here: the module will be
654 called addi_apci_3120.
656 config COMEDI_ADDI_APCI_3501
657 tristate "ADDI-DATA APCI_3501 support"
658 depends on VIRT_TO_BUS
661 Enable support for ADDI-DATA APCI_3501 cards
663 To compile this driver as a module, choose M here: the module will be
664 called addi_apci_3501.
666 config COMEDI_ADDI_APCI_3XXX
667 tristate "ADDI-DATA APCI_3xxx support"
668 depends on VIRT_TO_BUS
671 Enable support for ADDI-DATA APCI_3xxx cards
673 To compile this driver as a module, choose M here: the module will be
674 called addi_apci_3xxx.
676 config COMEDI_ADL_PCI6208
677 tristate "ADLink PCI-6208A support"
681 Enable support for ADLink PCI-6208A cards
683 To compile this driver as a module, choose M here: the module will be
686 config COMEDI_ADL_PCI7230
687 tristate "ADLink PCI-7230 digital io board support"
690 Enable support for ADlink PCI-7230 digital io board support
692 To compile this driver as a module, choose M here: the module will be
695 config COMEDI_ADL_PCI7296
696 tristate "ADLink PCI-7296 96 ch. digital io board support"
699 Enable support for ADlink PCI-7296 96 ch. digital io board support
701 To compile this driver as a module, choose M here: the module will be
704 config COMEDI_ADL_PCI7432
705 tristate "ADLink PCI-7432 64 ch. isolated digital io board support"
708 Enable support for ADlink PCI-7432 64 ch. isolated digital io board
710 To compile this driver as a module, choose M here: the module will be
713 config COMEDI_ADL_PCI8164
714 tristate "ADLink PCI-8164 4 Axes Motion Control board support"
717 Enable support for ADlink PCI-8164 4 Axes Motion Control board
719 To compile this driver as a module, choose M here: the module will be
722 config COMEDI_ADL_PCI9111
723 tristate "ADLink PCI-9111HR support"
727 Enable support for ADlink PCI9111 cards
729 To compile this driver as a module, choose M here: the module will be
732 config COMEDI_ADL_PCI9118
733 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
735 depends on VIRT_TO_BUS
738 Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
740 To compile this driver as a module, choose M here: the module will be
743 config COMEDI_ADV_PCI1710
744 tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support"
747 Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
748 PCI-1713, PCI-1720 and PCI-1731
750 To compile this driver as a module, choose M here: the module will be
753 config COMEDI_ADV_PCI1723
754 tristate "Advantech PCI-1723 support"
757 Enable support for Advantech PCI-1723 cards
759 To compile this driver as a module, choose M here: the module will be
762 config COMEDI_ADV_PCI_DIO
763 tristate "Advantech PCI DIO card support"
767 Enable support for Advantech PCI DIO cards
768 PCI-1730, PCI-1733, PCI-1734, PCI-1736UP, PCI-1750, PCI-1751,
769 PCI-1752, PCI-1753/E, PCI-1754, PCI-1756 and PCI-1762
771 To compile this driver as a module, choose M here: the module will be
774 config COMEDI_AMPLC_DIO200
775 tristate "Amplicon PC272E and PCI272 DIO board support"
779 Enable support for Amplicon PC272E and PCI272 DIO boards
781 To compile this driver as a module, choose M here: the module will be
784 config COMEDI_AMPLC_PC236
785 tristate "Amplicon PC36AT and PCI236 DIO board support"
789 Enable support for Amplicon PC36AT and PCI236 DIO boards
791 To compile this driver as a module, choose M here: the module will be
794 config COMEDI_AMPLC_PC263
795 tristate "Amplicon PC263 and PCI263 relay board support"
798 Enable support for Amplicon PC263 and PCI263 relay boards
800 To compile this driver as a module, choose M here: the module will be
803 config COMEDI_AMPLC_PCI224
804 tristate "Amplicon PCI224 and PCI234 support"
808 Enable support for Amplicon PCI224 and PCI234 AO boards
810 To compile this driver as a module, choose M here: the module will be
813 config COMEDI_AMPLC_PCI230
814 tristate "Amplicon PCI230 and PCI260 support"
818 Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
821 To compile this driver as a module, choose M here: the module will be
824 config COMEDI_CONTEC_PCI_DIO
825 tristate "Contec PIO1616L digital I/O board support"
828 Enable support for the Contec PIO1616L digital I/O board
830 To compile this driver as a module, choose M here: the module will be
831 called contec_pci_dio.
834 tristate "Data Translation DT3000 series support"
837 Enable support for Data Translation DT3000 series
838 DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
841 To compile this driver as a module, choose M here: the module will be
844 config COMEDI_UNIOXX5
845 tristate "Fastwel UNIOxx-5 analog and digital io board support"
848 Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
850 To compile this driver as a module, choose M here: the module will be
853 config COMEDI_GSC_HPDI
854 tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
858 Enable support for General Standards Corporation high speed parallel
859 digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
860 Only receive mode works, transmit not supported.
862 To compile this driver as a module, choose M here: the module will be
865 config COMEDI_ICP_MULTI
866 tristate "Inova ICP_MULTI support"
869 Enable support for Inova ICP_MULTI card
871 To compile this driver as a module, choose M here: the module will be
874 config COMEDI_II_PCI20KC
875 tristate "Intelligent Instruments PCI-20001C carrier support"
878 Enable support for Intelligent Instruments PCI-20001C carrier
879 PCI-20001, PCI-20006 and PCI-20341
881 To compile this driver as a module, choose M here: the module will be
884 config COMEDI_DAQBOARD2000
885 tristate "IOtech DAQboard/2000 support"
889 Enable support for the IOtech DAQboard/2000
891 To compile this driver as a module, choose M here: the module will be
894 config COMEDI_JR3_PCI
895 tristate "JR3/PCI force sensor board support"
898 Enable support for JR3/PCI force sensor boards
900 To compile this driver as a module, choose M here: the module will be
903 config COMEDI_KE_COUNTER
904 tristate "Kolter-Electronic PCI Counter 1 card support"
907 Enable support for Kolter-Electronic PCI Counter 1 cards
909 To compile this driver as a module, choose M here: the module will be
912 config COMEDI_CB_PCIDAS64
913 tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
918 Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
919 60xx, and 4020 series with the PLX 9080 PCI controller
921 To compile this driver as a module, choose M here: the module will be
924 config COMEDI_CB_PCIDAS
925 tristate "MeasurementComputing PCI-DAS support"
930 Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
931 AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
932 PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
935 To compile this driver as a module, choose M here: the module will be
938 config COMEDI_CB_PCIDDA
939 tristate "MeasurementComputing PCI-DDA series support"
943 Enable support for ComputerBoards/MeasurementComputing PCI-DDA
944 series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
945 PCI-DDA04/16 and PCI-DDA02/16
947 To compile this driver as a module, choose M here: the module will be
950 config COMEDI_CB_PCIDIO
951 tristate "MeasurementComputing PCI-DIO series support"
955 Enable support for ComputerBoards/MeasurementComputing PCI-DIO series
956 PCI-DIO24, PCI-DIO24H and PCI-DIO48H
958 To compile this driver as a module, choose M here: the module will be
961 config COMEDI_CB_PCIMDAS
962 tristate "MeasurementComputing PCIM-DAS1602/16 support"
966 Enable support for ComputerBoards/MeasurementComputing PCI Migration
967 series PCIM-DAS1602/16
969 To compile this driver as a module, choose M here: the module will be
972 config COMEDI_CB_PCIMDDA
973 tristate "MeasurementComputing PCIM-DDA06-16 support"
977 Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
979 To compile this driver as a module, choose M here: the module will be
983 tristate "Meilhaus ME-4000 support"
986 Enable support for Meilhaus PCI data acquisition cards
987 ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
989 To compile this driver as a module, choose M here: the module will be
993 tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
996 Enable support for Meilhaus PCI data acquisition cards
997 ME-2000i, ME-2600i and ME-3000vm1
999 To compile this driver as a module, choose M here: the module will be
1002 config COMEDI_NI_6527
1003 tristate "NI 6527 support"
1004 depends on COMEDI_MITE
1007 Enable support for the National Instruments 6527 PCI card
1009 To compile this driver as a module, choose M here: the module will be
1012 config COMEDI_NI_65XX
1013 tristate "NI 65xx static dio PCI card support"
1014 depends on COMEDI_MITE
1017 Enable support for National Instruments 65xx static dio boards.
1018 Supported devices: National Instruments PCI-6509 (ni_65xx),
1019 PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
1020 PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
1021 PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
1023 To compile this driver as a module, choose M here: the module will be
1026 config COMEDI_NI_660X
1027 tristate "NI 660x counter/timer PCI card support"
1028 depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
1031 Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
1032 PXI-6602 and PXI-6608.
1034 To compile this driver as a module, choose M here: the module will be
1037 config COMEDI_NI_670X
1038 tristate "NI 670x PCI card support"
1039 depends on COMEDI_MITE
1042 Enable support for National Instruments PCI-6703 and PCI-6704
1044 To compile this driver as a module, choose M here: the module will be
1047 config COMEDI_NI_PCIDIO
1048 tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support"
1049 depends on COMEDI_MITE
1053 Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1054 PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503, PCI-6503B, PCI-6503X,
1055 PXI-6503, PCI-6533 and PCI-6534
1056 The DIO-96 appears as four 8255 subdevices. See the 8255
1057 driver notes for details.
1059 To compile this driver as a module, choose M here: the module will be
1062 config COMEDI_NI_PCIMIO
1063 tristate "NI PCI-MIO-E series and M series support"
1064 depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
1069 Enable support for National Instruments PCI-MIO-E series and M series
1070 (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1071 PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1072 PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1073 PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1074 PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229,
1075 PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
1076 PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711,
1077 PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1078 PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1080 To compile this driver as a module, choose M here: the module will be
1083 config COMEDI_RTD520
1084 tristate "Real Time Devices PCI4520/DM7520 support"
1088 Enable support for Real Time Devices PCI4520/DM7520
1090 To compile this driver as a module, choose M here: the module will be
1094 tristate "Sensoray s526 support"
1097 Enable support for Sensoray s526
1099 To compile this driver as a module, choose M here: the module will be
1103 tristate "Sensoray 626 support"
1107 Enable support for Sensoray 626
1109 To compile this driver as a module, choose M here: the module will be
1112 config COMEDI_SSV_DNP
1113 tristate "SSV Embedded Systems DIL/Net-PC support"
1116 Enable support for SSV Embedded Systems DIL/Net-PC
1118 To compile this driver as a module, choose M here: the module will be
1121 endif # COMEDI_PCI_DRIVERS
1123 menuconfig COMEDI_PCMCIA_DRIVERS
1124 tristate "Comedi PCMCIA drivers"
1125 depends on COMEDI && (PCMCIA || PCCARD)
1128 Enable comedi PCMCIA and PCCARD drivers to be built
1130 Note that the answer to this question won't directly affect the
1131 kernel: saying N will just cause the configurator to skip all
1132 the questions about PCMCIA comedi drivers.
1134 if COMEDI_PCMCIA_DRIVERS && PCMCIA
1136 config COMEDI_CB_DAS16_CS
1137 tristate "CB DAS16 series PCMCIA support"
1140 Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1141 cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1143 To compile this driver as a module, choose M here: the module will be
1146 config COMEDI_DAS08_CS
1147 tristate "CB DAS08 PCMCIA support"
1151 Enable support for the ComputerBoards/MeasurementComputing DAS-08
1154 To compile this driver as a module, choose M here: the module will be
1157 config COMEDI_NI_DAQ_700_CS
1158 tristate "NI DAQCard-700 PCMCIA support"
1159 depends on COMEDI_NI_COMMON
1162 Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1164 To compile this driver as a module, choose M here: the module will be
1167 config COMEDI_NI_DAQ_DIO24_CS
1168 tristate "NI DAQ-Card DIO-24 PCMCIA support"
1169 depends on COMEDI_NI_COMMON
1173 Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1175 To compile this driver as a module, choose M here: the module will be
1176 called ni_daq_dio24.
1178 config COMEDI_NI_LABPC_CS
1179 tristate "NI DAQCard-1200 PCMCIA support"
1180 depends on COMEDI_NI_LABPC
1183 Enable support for the National Instruments PCMCIA DAQCard-1200
1185 To compile this driver as a module, choose M here: the module will be
1188 config COMEDI_NI_MIO_CS
1189 tristate "NI DAQCard E series PCMCIA support"
1190 depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
1195 Enable support for the National Instruments PCMCIA DAQCard E series
1196 DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1199 To compile this driver as a module, choose M here: the module will be
1202 config COMEDI_QUATECH_DAQP_CS
1203 tristate "Quatech DAQP PCMCIA data capture card support"
1206 Enable support for the Quatech DAQP PCMCIA data capture cards
1207 DAQP-208 and DAQP-308
1209 To compile this driver as a module, choose M here: the module will be
1210 called quatech_daqp_cs.
1212 endif # COMEDI_PCMCIA_DRIVERS
1214 menuconfig COMEDI_USB_DRIVERS
1215 tristate "Comedi USB drivers"
1216 depends on COMEDI && USB
1219 Enable comedi USB drivers to be built
1221 Note that the answer to this question won't directly affect the
1222 kernel: saying N will just cause the configurator to skip all
1223 the questions about USB comedi drivers.
1225 if COMEDI_USB_DRIVERS && USB
1227 config COMEDI_DT9812
1228 tristate "DataTranslation DT9812 USB module support"
1231 Enable support for the Data Translation DT9812 USB module
1233 To compile this driver as a module, choose M here: the module will be
1236 config COMEDI_USBDUX
1237 tristate "ITL USBDUX support"
1240 Enable support for the University of Stirling USB DAQ and INCITE
1241 Technology Limited driver
1243 To compile this driver as a module, choose M here: the module will be
1246 config COMEDI_USBDUXFAST
1247 tristate "ITL USB-DUXfast support"
1251 Enable support for the University of Stirling USB-DUXfast and INCITE
1252 Technology Limited driver
1254 To compile this driver as a module, choose M here: the module will be
1257 config COMEDI_VMK80XX
1258 tristate "Velleman VM110/VM140 USB Board support"
1261 Build the Velleman USB Board Low-Level Driver supporting the
1262 K8055/K8061 aka VM110/VM140 devices
1264 To compile this driver as a module, choose M here: the module will be
1267 endif # COMEDI_USB_DRIVERS
1269 menuconfig COMEDI_NI_COMMON
1270 tristate "Comedi National Instruments card support"
1274 Enable comedi support for National Instruments cards.
1275 Modules in this section are used by many comedi NI drivers.
1277 Note that the answer to this question won't directly affect the
1278 kernel: saying N will just cause the configurator to skip all
1279 the questions about National Instruments cards.
1284 tristate "NI Mite PCI interface chip support"
1288 Enable support for National Instruments Mite PCI interface chip
1290 To compile this driver as a module, choose M here: the module will be
1293 config COMEDI_NI_TIO
1294 tristate "NI general purpose counter support"
1295 depends on COMEDI_MITE
1298 Enable support for National Instruments general purpose counters.
1299 This module is not used directly by end-users. Rather, it
1300 is used by other drivers (for example ni_660x and ni_pcimio)
1301 to provide support for NI's general purpose counters.
1303 To compile this driver as a modules, choose M here: two modules will
1304 be build: ni_tio and ni_tiocmd.
1306 config COMEDI_NI_LABPC
1307 tristate "NI Lab-PC and compatibles ISA and PCI support"
1308 depends on COMEDI_MITE
1311 depends on VIRT_TO_BUS
1314 Enable support for National Instruments Lab-PC and compatibles
1315 Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200.
1316 Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
1317 not yet been added to the driver.
1319 To compile this driver as a module, choose M here: the module will be
1322 endif # COMEDI_NI_COMMON
1325 tristate "Generic 8255 support"
1329 Enable generic 8255 support.
1331 You should enable compilation this driver if you plan to use a board
1332 that has an 8255 chip. For multifunction boards, the main driver will
1333 configure the 8255 subdevice automatically.
1335 Note that most PCI 8255 boards do NOT work with this driver, and
1336 need a separate driver as a wrapper.
1338 To compile this driver as a module, choose M here: the module will be
1342 tristate "DAS-08 compatible support"
1347 Enable support for DAS08 and compatible ISA, PC/104 and PCI cards.
1349 Note that PCMCIA DAS08 cards are not directly supported by this
1350 driver, and need a separate driver as a wrapper.
1352 To compile this driver as a module, choose M here: the module will be
1356 tristate "Comedi shared functions for low-level driver support"
1360 Enable support for shared functions for low-level drivers.
1361 This module is not used directly by end-users. Rather, it
1362 is used by many other comedi drivers.
1364 To compile this driver as a module, choose M here: the module will be