drivers/staging/bcm/InterfaceIdleMode.c

   1 #include "headers.h"
   2
   3 /*
   4 Function:                               InterfaceIdleModeWakeup
   5
   6 Description:                    This is the hardware specific Function for waking up HW device from Idle mode.
   7                                                 A software abort pattern is written to the device to wake it and necessary power state
   8                                                 transitions from host are performed here.
   9
  10 Input parameters:               IN PMINI_ADAPTER Adapter   - Miniport Adapter Context
  11
  12
  13 Return:                         BCM_STATUS_SUCCESS - If Wakeup of the HW Interface was successful.
  14                                                 Other           - If an error occured.
  15 */
  16
  17
  18 /*
  19 Function:                               InterfaceIdleModeRespond
  20
  21 Description:                    This is the hardware specific Function for responding to Idle mode request from target.
  22                                                 Necessary power state transitions from host for idle mode or other device specific
  23                                                 initializations are performed here.
  24
  25 Input parameters:               IN PMINI_ADAPTER Adapter   - Miniport Adapter Context
  26
  27
  28 Return:                         BCM_STATUS_SUCCESS - If Idle mode response related HW configuration was successful.
  29                                                 Other           - If an error occured.
  30 */
  31
  32 /*
  33 "dmem bfc02f00  100" tells how many time device went in Idle mode.
  34 this value will be at address bfc02fa4.just before value d0ea1dle.
  35
  36 Set time value by writing at bfc02f98 7d0
  37
  38 checking the Ack timer expire on kannon by running command
  39 d qcslog .. if it shows e means host has not send response to f/w with in 200 ms. Response should be
  40 send to f/w with in 200 ms after the Idle/Shutdown req issued
  41
  42 */
  43
  44
  45 int InterfaceIdleModeRespond(PMINI_ADAPTER Adapter, unsigned int* puiBuffer)
  46 {
  47         int     status = STATUS_SUCCESS;
  48         unsigned int    uiRegRead = 0;
  49
  50         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"SubType of Message :0x%X", ntohl(*puiBuffer));
  51
  52         if(ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD)
  53         {
  54                 BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL," Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype");
  55                 if(ntohl(*(puiBuffer+1)) == 0 )
  56                 {
  57                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Got IDLE MODE WAKE UP Response From F/W");
  58
  59                         status = wrmalt (Adapter,SW_ABORT_IDLEMODE_LOC, &uiRegRead, sizeof(uiRegRead));
  60                         if(status)
  61                         {
  62                                 BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg");
  63                                 return status;
  64                         }
  65
  66                         if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
  67                         {
  68                                 uiRegRead = 0x00000000 ;
  69                                 status = wrmalt (Adapter,DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegRead, sizeof(uiRegRead));
  70                                 if(status)
  71                                 {
  72                                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode     Reg");
  73                                         return status;
  74                                 }
  75                         }
  76                         //Below Register should not br read in case of Manual and Protocol Idle mode.
  77                         else if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)
  78                         {
  79                                 //clear on read Register
  80                                 status = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegRead, sizeof(uiRegRead));
  81                                 if(status)
  82                                 {
  83                                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg0");
  84                                         return status;
  85                                 }
  86                                 //clear on read Register
  87                                 status = rdmalt (Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegRead, sizeof(uiRegRead));
  88                                 if(status)
  89                                 {
  90                                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort     Reg1");
  91                                         return status;
  92                                 }
  93                         }
  94                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device Up from Idle Mode");
  95
  96                         // Set Idle Mode Flag to False and Clear IdleMode reg.
  97                         Adapter->IdleMode = FALSE;
  98                         Adapter->bTriedToWakeUpFromlowPowerMode = FALSE;
  99
 100                         wake_up(&Adapter->lowpower_mode_wait_queue);
 101
 102                 }
 103                 else
 104                 {
 105                         if(TRUE == Adapter->IdleMode)
 106                         {
 107                                 BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Device is already in Idle mode....");
 108                                 return status ;
 109                         }
 110
 111                         uiRegRead = 0;
 112                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got Req from F/W to go in IDLE mode \n");
 113
 114                         if (Adapter->chip_id== BCS220_2 ||
 115                                 Adapter->chip_id == BCS220_2BC ||
 116                                         Adapter->chip_id== BCS250_BC ||
 117                                         Adapter->chip_id== BCS220_3)
 118                         {
 119
 120                                 status = rdmalt(Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
 121                                 if(status)
 122                                 {
 123                                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "rdm failed while Reading HPM_CONFIG_LDO145 Reg 0\n");
 124                                         return status;
 125                                 }
 126
 127
 128                                 uiRegRead |= (1<<17);
 129
 130                                 status = wrmalt (Adapter,HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
 131                                 if(status)
 132                                 {
 133                                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg\n");
 134                                         return status;
 135                                 }
 136
 137                         }
 138                         SendIdleModeResponse(Adapter);
 139                 }
 140         }
 141         else if(ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG)
 142         {
 143                 BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "OverRiding Service Flow Params");
 144                 OverrideServiceFlowParams(Adapter,puiBuffer);
 145         }
 146         return status;
 147 }
 148
 149 static int InterfaceAbortIdlemode(PMINI_ADAPTER Adapter, unsigned int Pattern)
 150 {
 151         int     status = STATUS_SUCCESS;
 152         unsigned int value;
 153         unsigned int chip_id ;
 154         unsigned long timeout = 0 ,itr = 0;
 155
 156         int     lenwritten = 0;
 157         unsigned char aucAbortPattern[8]={0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
 158         PS_INTERFACE_ADAPTER psInterfaceAdapter = Adapter->pvInterfaceAdapter;
 159
 160         //Abort Bus suspend if its already suspended
 161         if((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend))
 162         {
 163                 status = usb_autopm_get_interface(psInterfaceAdapter->interface);
 164                 BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Bus got wakeup..Aborting Idle mode... status:%d \n",status);
 165
 166         }
 167
 168         if((Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
 169                                                                         ||
 170            (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE))
 171         {
 172                 //write the SW abort pattern.
 173                 BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern);
 174                 status = wrmalt(Adapter,SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern));
 175                 if(status)
 176                 {
 177                                 BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
 178                                 return status;
 179                 }
 180         }
 181
 182         if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
 183         {
 184                 value = 0x80000000;
 185                 status = wrmalt(Adapter,DEBUG_INTERRUPT_GENERATOR_REGISTOR, &value, sizeof(value));
 186                 if(status)
 187                 {
 188                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Register failed");
 189                         return status;
 190                 }
 191         }
 192         else if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)
 193         {
 194                 /*
 195                  * Get a Interrupt Out URB and send 8 Bytes Down
 196                  * To be Done in Thread Context.
 197                  * Not using Asynchronous Mechanism.
 198                  */
 199                 status = usb_interrupt_msg (psInterfaceAdapter->udev,
 200                         usb_sndintpipe(psInterfaceAdapter->udev,
 201                         psInterfaceAdapter->sIntrOut.int_out_endpointAddr),
 202                         aucAbortPattern,
 203                         8,
 204                         &lenwritten,
 205                         5000);
 206                 if(status)
 207                 {
 208                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending Abort pattern down fails with status:%d..\n",status);
 209                         return status;
 210                 }
 211                 else
 212                 {
 213                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "NOB Sent down :%d", lenwritten);
 214                 }
 215
 216                 //mdelay(25);
 217
 218                 timeout= jiffies +  msecs_to_jiffies(50) ;
 219                 while( timeout > jiffies )
 220                 {
 221                         itr++ ;
 222                         rdmalt(Adapter, CHIP_ID_REG, &chip_id, sizeof(UINT));
 223                         if(0xbece3200==(chip_id&~(0xF0)))
 224                         {
 225                                 chip_id = chip_id&~(0xF0);
 226                         }
 227                         if(chip_id == Adapter->chip_id)
 228                                 break;
 229                 }
 230                 if(timeout < jiffies )
 231                 {
 232                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Not able to read chip-id even after 25 msec");
 233                 }
 234                 else
 235                 {
 236                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Number of completed iteration to read chip-id :%lu", itr);
 237                 }
 238
 239                 status = wrmalt(Adapter,SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(status));
 240                 if(status)
 241                 {
 242                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
 243                         return status;
 244                 }
 245         }
 246         return status;
 247 }
 248 int InterfaceIdleModeWakeup(PMINI_ADAPTER Adapter)
 249 {
 250         ULONG   Status = 0;
 251         if(Adapter->bTriedToWakeUpFromlowPowerMode)
 252         {
 253                 BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Wake up already attempted.. ignoring\n");
 254         }
 255         else
 256         {
 257                 BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Writing Low Power Mode Abort pattern to the Device\n");
 258                 Adapter->bTriedToWakeUpFromlowPowerMode = TRUE;
 259                 InterfaceAbortIdlemode(Adapter, Adapter->usIdleModePattern);
 260
 261         }
 262         return Status;
 263 }
 264
 265 void InterfaceHandleShutdownModeWakeup(PMINI_ADAPTER Adapter)
 266 {
 267         unsigned int uiRegVal = 0;
 268         INT Status = 0;
 269         if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
 270         {
 271                 // clear idlemode interrupt.
 272                 uiRegVal = 0;
 273                 Status =wrmalt(Adapter,DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal));
 274                 if(Status)
 275                 {
 276                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status);
 277                         return;
 278                 }
 279         }
 280
 281     else
 282         {
 283
 284         //clear Interrupt EP registers.
 285                 Status = rdmalt(Adapter,DEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal));
 286                 if(Status)
 287                 {
 288                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"RDM of DEVICE_INT_OUT_EP_REG0 failed with Err :%d", Status);
 289                         return;
 290                 }
 291
 292         Status = rdmalt(Adapter,DEVICE_INT_OUT_EP_REG1, &uiRegVal, sizeof(uiRegVal));
 293                 if(Status)
 294                 {
 295                         BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"RDM of DEVICE_INT_OUT_EP_REG1 failed with Err :%d", Status);
 296                         return;
 297                 }
 298         }
 299 }
 300