Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6
[pandora-kernel.git] / drivers / scsi / sun3_scsi_vme.c
1  /*
2  * Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
3  *
4  * Sun3 DMA routines added by Sam Creasey (sammy@sammy.net)
5  *
6  * VME support added by Sam Creasey
7  *
8  * Adapted from sun3_scsi.c -- see there for other headers
9  *
10  * TODO: modify this driver to support multiple Sun3 SCSI VME boards
11  *
12  */
13
14 #define AUTOSENSE
15
16 #include <linux/types.h>
17 #include <linux/stddef.h>
18 #include <linux/ctype.h>
19 #include <linux/delay.h>
20
21 #include <linux/module.h>
22 #include <linux/signal.h>
23 #include <linux/ioport.h>
24 #include <linux/init.h>
25 #include <linux/blkdev.h>
26
27 #include <asm/io.h>
28 #include <asm/system.h>
29
30 #include <asm/sun3ints.h>
31 #include <asm/dvma.h>
32 #include <asm/idprom.h>
33 #include <asm/machines.h>
34
35 #define SUN3_SCSI_VME
36
37 #undef SUN3_SCSI_DEBUG
38
39 /* dma on! */
40 #define REAL_DMA
41
42 #include "scsi.h"
43 #include "initio.h"
44 #include <scsi/scsi_host.h>
45 #include "sun3_scsi.h"
46
47 extern int sun3_map_test(unsigned long, char *);
48
49 #define USE_WRAPPER
50 /*#define RESET_BOOT */
51 #define DRIVER_SETUP
52
53 #define NDEBUG 0
54
55 /*
56  * BUG can be used to trigger a strange code-size related hang on 2.1 kernels
57  */
58 #ifdef BUG
59 #undef RESET_BOOT
60 #undef DRIVER_SETUP
61 #endif
62
63 /* #define SUPPORT_TAGS */
64
65 //#define       ENABLE_IRQ()    enable_irq( SUN3_VEC_VMESCSI0 ); 
66 #define ENABLE_IRQ()
67
68
69 static irqreturn_t scsi_sun3_intr(int irq, void *dummy);
70 static inline unsigned char sun3scsi_read(int reg);
71 static inline void sun3scsi_write(int reg, int value);
72
73 static int setup_can_queue = -1;
74 module_param(setup_can_queue, int, 0);
75 static int setup_cmd_per_lun = -1;
76 module_param(setup_cmd_per_lun, int, 0);
77 static int setup_sg_tablesize = -1;
78 module_param(setup_sg_tablesize, int, 0);
79 #ifdef SUPPORT_TAGS
80 static int setup_use_tagged_queuing = -1;
81 module_param(setup_use_tagged_queuing, int, 0);
82 #endif
83 static int setup_hostid = -1;
84 module_param(setup_hostid, int, 0);
85
86 static struct scsi_cmnd *sun3_dma_setup_done = NULL;
87
88 #define AFTER_RESET_DELAY       (HZ/2)
89
90 /* ms to wait after hitting dma regs */
91 #define SUN3_DMA_DELAY 10
92
93 /* dvma buffer to allocate -- 32k should hopefully be more than sufficient */
94 #define SUN3_DVMA_BUFSIZE 0xe000
95
96 /* minimum number of bytes to do dma on */
97 #define SUN3_DMA_MINSIZE 128
98
99 static volatile unsigned char *sun3_scsi_regp;
100 static volatile struct sun3_dma_regs *dregs;
101 #ifdef OLDDMA
102 static unsigned char *dmabuf = NULL; /* dma memory buffer */
103 #endif
104 static unsigned char *sun3_dma_orig_addr = NULL;
105 static unsigned long sun3_dma_orig_count = 0;
106 static int sun3_dma_active = 0;
107 static unsigned long last_residual = 0;
108
109 /*
110  * NCR 5380 register access functions
111  */
112
113 static inline unsigned char sun3scsi_read(int reg)
114 {
115         return( sun3_scsi_regp[reg] );
116 }
117
118 static inline void sun3scsi_write(int reg, int value)
119 {
120         sun3_scsi_regp[reg] = value;
121 }
122
123 /*
124  * XXX: status debug
125  */
126 static struct Scsi_Host *default_instance;
127
128 /*
129  * Function : int sun3scsi_detect(struct scsi_host_template * tpnt)
130  *
131  * Purpose : initializes mac NCR5380 driver based on the
132  *      command line / compile time port and irq definitions.
133  *
134  * Inputs : tpnt - template for this SCSI adapter.
135  *
136  * Returns : 1 if a host adapter was found, 0 if not.
137  *
138  */
139  
140 static int sun3scsi_detect(struct scsi_host_template * tpnt)
141 {
142         unsigned long ioaddr, irq = 0;
143         static int called = 0;
144         struct Scsi_Host *instance;
145         int i;
146         unsigned long addrs[3] = { IOBASE_SUN3_VMESCSI, 
147                                    IOBASE_SUN3_VMESCSI + 0x4000,
148                                    0 };
149         unsigned long vecs[3] = { SUN3_VEC_VMESCSI0,
150                                   SUN3_VEC_VMESCSI1,
151                                   0 };
152         /* check that this machine has an onboard 5380 */
153         switch(idprom->id_machtype) {
154         case SM_SUN3|SM_3_160:
155         case SM_SUN3|SM_3_260:
156                 break;
157
158         default:
159                 return 0;
160         }
161
162         if(called)
163                 return 0;
164
165         tpnt->proc_name = "Sun3 5380 VME SCSI";
166
167         /* setup variables */
168         tpnt->can_queue =
169                 (setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE;
170         tpnt->cmd_per_lun =
171                 (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN;
172         tpnt->sg_tablesize = 
173                 (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE;
174         
175         if (setup_hostid >= 0)
176                 tpnt->this_id = setup_hostid;
177         else {
178                 /* use 7 as default */
179                 tpnt->this_id = 7;
180         }
181         
182         ioaddr = 0;
183         for(i = 0; addrs[i] != 0; i++) {
184                 unsigned char x;
185                 
186                 ioaddr = (unsigned long)sun3_ioremap(addrs[i], PAGE_SIZE,
187                                                      SUN3_PAGE_TYPE_VME16);
188                 irq = vecs[i];
189                 sun3_scsi_regp = (unsigned char *)ioaddr;
190                 
191                 dregs = (struct sun3_dma_regs *)(((unsigned char *)ioaddr) + 8);
192                 
193                 if(sun3_map_test((unsigned long)dregs, &x)) {
194                         unsigned short oldcsr;
195
196                         oldcsr = dregs->csr;
197                         dregs->csr = 0;
198                         udelay(SUN3_DMA_DELAY);
199                         if(dregs->csr == 0x1400)
200                                 break;
201                         
202                         dregs->csr = oldcsr;
203                 }
204
205                 iounmap((void *)ioaddr);
206                 ioaddr = 0;
207         }
208
209         if(!ioaddr)
210                 return 0;
211         
212 #ifdef SUPPORT_TAGS
213         if (setup_use_tagged_queuing < 0)
214                 setup_use_tagged_queuing = USE_TAGGED_QUEUING;
215 #endif
216
217         instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
218         if(instance == NULL)
219                 return 0;
220                 
221         default_instance = instance;
222
223         instance->io_port = (unsigned long) ioaddr;
224         instance->irq = irq;
225
226         NCR5380_init(instance, 0);
227
228         instance->n_io_port = 32;
229
230         ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
231
232         if (request_irq(instance->irq, scsi_sun3_intr,
233                         0, "Sun3SCSI-5380VME", instance)) {
234 #ifndef REAL_DMA
235                 printk("scsi%d: IRQ%d not free, interrupts disabled\n",
236                        instance->host_no, instance->irq);
237                 instance->irq = SCSI_IRQ_NONE;
238 #else
239                 printk("scsi%d: IRQ%d not free, bailing out\n",
240                        instance->host_no, instance->irq);
241                 return 0;
242 #endif
243         }
244
245         printk("scsi%d: Sun3 5380 VME at port %lX irq", instance->host_no, instance->io_port);
246         if (instance->irq == SCSI_IRQ_NONE)
247                 printk ("s disabled");
248         else
249                 printk (" %d", instance->irq);
250         printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
251                instance->can_queue, instance->cmd_per_lun,
252                SUN3SCSI_PUBLIC_RELEASE);
253         printk("\nscsi%d:", instance->host_no);
254         NCR5380_print_options(instance);
255         printk("\n");
256
257         dregs->csr = 0;
258         udelay(SUN3_DMA_DELAY);
259         dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR;
260         udelay(SUN3_DMA_DELAY);
261         dregs->fifo_count = 0;
262         dregs->fifo_count_hi = 0;
263         dregs->dma_addr_hi = 0;
264         dregs->dma_addr_lo = 0;
265         dregs->dma_count_hi = 0;
266         dregs->dma_count_lo = 0;
267
268         dregs->ivect = VME_DATA24 | (instance->irq & 0xff);
269
270         called = 1;
271
272 #ifdef RESET_BOOT
273         sun3_scsi_reset_boot(instance);
274 #endif
275
276         return 1;
277 }
278
279 int sun3scsi_release (struct Scsi_Host *shpnt)
280 {
281         if (shpnt->irq != SCSI_IRQ_NONE)
282                 free_irq(shpnt->irq, shpnt);
283
284         iounmap((void *)sun3_scsi_regp);
285
286         return 0;
287 }
288
289 #ifdef RESET_BOOT
290 /*
291  * Our 'bus reset on boot' function
292  */
293
294 static void sun3_scsi_reset_boot(struct Scsi_Host *instance)
295 {
296         unsigned long end;
297
298         NCR5380_local_declare();
299         NCR5380_setup(instance);
300         
301         /*
302          * Do a SCSI reset to clean up the bus during initialization. No
303          * messing with the queues, interrupts, or locks necessary here.
304          */
305
306         printk( "Sun3 SCSI: resetting the SCSI bus..." );
307
308         /* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */
309 //              sun3_disable_irq( IRQ_SUN3_SCSI );
310
311         /* get in phase */
312         NCR5380_write( TARGET_COMMAND_REG,
313                       PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
314
315         /* assert RST */
316         NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
317
318         /* The min. reset hold time is 25us, so 40us should be enough */
319         udelay( 50 );
320
321         /* reset RST and interrupt */
322         NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
323         NCR5380_read( RESET_PARITY_INTERRUPT_REG );
324
325         for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
326                 barrier();
327
328         /* switch on SCSI IRQ again */
329 //              sun3_enable_irq( IRQ_SUN3_SCSI );
330
331         printk( " done\n" );
332 }
333 #endif
334
335 static const char * sun3scsi_info (struct Scsi_Host *spnt) {
336     return "";
337 }
338
339 // safe bits for the CSR
340 #define CSR_GOOD 0x060f
341
342 static irqreturn_t scsi_sun3_intr(int irq, void *dummy)
343 {
344         unsigned short csr = dregs->csr;
345         int handled = 0;
346
347         dregs->csr &= ~CSR_DMA_ENABLE;
348
349
350 #ifdef SUN3_SCSI_DEBUG
351         printk("scsi_intr csr %x\n", csr);
352 #endif
353
354         if(csr & ~CSR_GOOD) {
355                 if(csr & CSR_DMA_BUSERR) {
356                         printk("scsi%d: bus error in dma\n", default_instance->host_no);
357 #ifdef SUN3_SCSI_DEBUG
358                         printk("scsi: residual %x count %x addr %p dmaaddr %x\n", 
359                                dregs->fifo_count,
360                                dregs->dma_count_lo | (dregs->dma_count_hi << 16),
361                                sun3_dma_orig_addr,
362                                dregs->dma_addr_lo | (dregs->dma_addr_hi << 16));
363 #endif
364                 }
365
366                 if(csr & CSR_DMA_CONFLICT) {
367                         printk("scsi%d: dma conflict\n", default_instance->host_no);
368                 }
369                 handled = 1;
370         }
371
372         if(csr & (CSR_SDB_INT | CSR_DMA_INT)) {
373                 NCR5380_intr(irq, dummy);
374                 handled = 1;
375         }
376
377         return IRQ_RETVAL(handled);
378 }
379
380 /*
381  * Debug stuff - to be called on NMI, or sysrq key. Use at your own risk; 
382  * reentering NCR5380_print_status seems to have ugly side effects
383  */
384
385 /* this doesn't seem to get used at all -- sam */
386 #if 0
387 void sun3_sun3_debug (void)
388 {
389         unsigned long flags;
390         NCR5380_local_declare();
391
392         if (default_instance) {
393                         local_irq_save(flags);
394                         NCR5380_print_status(default_instance);
395                         local_irq_restore(flags);
396         }
397 }
398 #endif
399
400
401 /* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */
402 static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int write_flag)
403 {
404         void *addr;
405
406         if(sun3_dma_orig_addr != NULL)
407                 dvma_unmap(sun3_dma_orig_addr);
408
409 //      addr = sun3_dvma_page((unsigned long)data, (unsigned long)dmabuf);
410         addr = (void *)dvma_map_vme((unsigned long) data, count);
411                 
412         sun3_dma_orig_addr = addr;
413         sun3_dma_orig_count = count;
414         
415 #ifdef SUN3_SCSI_DEBUG
416         printk("scsi: dma_setup addr %p count %x\n", addr, count);
417 #endif
418
419 //      dregs->fifo_count = 0;
420 #if 0   
421         /* reset fifo */
422         dregs->csr &= ~CSR_FIFO;
423         dregs->csr |= CSR_FIFO;
424 #endif  
425         /* set direction */
426         if(write_flag)
427                 dregs->csr |= CSR_SEND;
428         else
429                 dregs->csr &= ~CSR_SEND;
430         
431         /* reset fifo */
432 //      dregs->csr &= ~CSR_FIFO;
433 //      dregs->csr |= CSR_FIFO;
434
435         dregs->csr |= CSR_PACK_ENABLE;
436
437         dregs->dma_addr_hi = ((unsigned long)addr >> 16);
438         dregs->dma_addr_lo = ((unsigned long)addr & 0xffff);
439         
440         dregs->dma_count_hi = 0;
441         dregs->dma_count_lo = 0;
442         dregs->fifo_count_hi = 0;
443         dregs->fifo_count = 0;
444                 
445 #ifdef SUN3_SCSI_DEBUG
446         printk("scsi: dma_setup done csr %x\n", dregs->csr);
447 #endif
448         return count;
449
450 }
451
452 static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance)
453 {
454         return last_residual;
455 }
456
457 static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted,
458                                                   struct scsi_cmnd *cmd,
459                                                   int write_flag)
460 {
461         if(blk_fs_request(cmd->request))
462                 return wanted;
463         else
464                 return 0;
465 }
466
467 static int sun3scsi_dma_start(unsigned long count, char *data)
468 {
469         
470         unsigned short csr;
471
472         csr = dregs->csr;
473 #ifdef SUN3_SCSI_DEBUG
474         printk("scsi: dma_start data %p count %x csr %x fifo %x\n", data, count, csr, dregs->fifo_count);
475 #endif
476         
477         dregs->dma_count_hi = (sun3_dma_orig_count >> 16);
478         dregs->dma_count_lo = (sun3_dma_orig_count & 0xffff);
479
480         dregs->fifo_count_hi = (sun3_dma_orig_count >> 16);
481         dregs->fifo_count = (sun3_dma_orig_count & 0xffff);
482
483 //      if(!(csr & CSR_DMA_ENABLE))
484 //              dregs->csr |= CSR_DMA_ENABLE;
485
486         return 0;
487 }
488
489 /* clean up after our dma is done */
490 static int sun3scsi_dma_finish(int write_flag)
491 {
492         unsigned short fifo;
493         int ret = 0;
494         
495         sun3_dma_active = 0;
496
497         dregs->csr &= ~CSR_DMA_ENABLE;
498         
499         fifo = dregs->fifo_count;
500         if(write_flag) {
501                 if((fifo > 0) && (fifo < sun3_dma_orig_count))
502                         fifo++;
503         }
504
505         last_residual = fifo;
506 #ifdef SUN3_SCSI_DEBUG
507         printk("scsi: residual %x total %x\n", fifo, sun3_dma_orig_count);
508 #endif
509         /* empty bytes from the fifo which didn't make it */
510         if((!write_flag) && (dregs->csr & CSR_LEFT)) {
511                 unsigned char *vaddr;
512
513 #ifdef SUN3_SCSI_DEBUG
514                 printk("scsi: got left over bytes\n");
515 #endif
516
517                 vaddr = (unsigned char *)dvma_vmetov(sun3_dma_orig_addr);
518                 
519                 vaddr += (sun3_dma_orig_count - fifo);
520                 vaddr--;
521                 
522                 switch(dregs->csr & CSR_LEFT) {
523                 case CSR_LEFT_3:
524                         *vaddr = (dregs->bpack_lo & 0xff00) >> 8;
525                         vaddr--;
526                         
527                 case CSR_LEFT_2:
528                         *vaddr = (dregs->bpack_hi & 0x00ff);
529                         vaddr--;
530                         
531                 case CSR_LEFT_1:
532                         *vaddr = (dregs->bpack_hi & 0xff00) >> 8;
533                         break;
534                 }
535                 
536                 
537         }
538
539         dvma_unmap(sun3_dma_orig_addr);
540         sun3_dma_orig_addr = NULL;
541
542         dregs->dma_addr_hi = 0;
543         dregs->dma_addr_lo = 0;
544         dregs->dma_count_hi = 0;
545         dregs->dma_count_lo = 0;
546
547         dregs->fifo_count = 0;
548         dregs->fifo_count_hi = 0;
549
550         dregs->csr &= ~CSR_SEND;
551         
552 //      dregs->csr |= CSR_DMA_ENABLE;
553         
554 #if 0
555         /* reset fifo */
556         dregs->csr &= ~CSR_FIFO;
557         dregs->csr |= CSR_FIFO;
558 #endif  
559         sun3_dma_setup_done = NULL;
560
561         return ret;
562
563 }
564
565 #include "sun3_NCR5380.c"
566
567 static struct scsi_host_template driver_template = {
568         .name                   = SUN3_SCSI_NAME,
569         .detect                 = sun3scsi_detect,
570         .release                = sun3scsi_release,
571         .info                   = sun3scsi_info,
572         .queuecommand           = sun3scsi_queue_command,
573         .eh_abort_handler       = sun3scsi_abort,
574         .eh_bus_reset_handler   = sun3scsi_bus_reset,
575         .can_queue              = CAN_QUEUE,
576         .this_id                = 7,
577         .sg_tablesize           = SG_TABLESIZE,
578         .cmd_per_lun            = CMD_PER_LUN,
579         .use_clustering         = DISABLE_CLUSTERING
580 };
581
582
583 #include "scsi_module.c"
584
585 MODULE_LICENSE("GPL");