[SCSI] st: expand ability to write immediate filemarks
[pandora-kernel.git] / drivers / scsi / st.h
1
2 #ifndef _ST_H
3 #define _ST_H
4
5 #include <linux/completion.h>
6 #include <linux/mutex.h>
7 #include <linux/kref.h>
8 #include <scsi/scsi_cmnd.h>
9
10 /* Descriptor for analyzed sense data */
11 struct st_cmdstatus {
12         int midlevel_result;
13         struct scsi_sense_hdr sense_hdr;
14         int have_sense;
15         int residual;
16         u64 uremainder64;
17         u8 flags;
18         u8 remainder_valid;
19         u8 fixed_format;
20         u8 deferred;
21 };
22
23 struct scsi_tape;
24
25 /* scsi tape command */
26 struct st_request {
27         unsigned char cmd[MAX_COMMAND_SIZE];
28         unsigned char sense[SCSI_SENSE_BUFFERSIZE];
29         int result;
30         struct scsi_tape *stp;
31         struct completion *waiting;
32         struct bio *bio;
33 };
34
35 /* The tape buffer descriptor. */
36 struct st_buffer {
37         unsigned char dma;      /* DMA-able buffer */
38         unsigned char do_dio;   /* direct i/o set up? */
39         unsigned char cleared;  /* internal buffer cleared after open? */
40         int buffer_size;
41         int buffer_blocks;
42         int buffer_bytes;
43         int read_pointer;
44         int writing;
45         int syscall_result;
46         struct st_request *last_SRpnt;
47         struct st_cmdstatus cmdstat;
48         struct page **reserved_pages;
49         int reserved_page_order;
50         struct page **mapped_pages;
51         struct rq_map_data map_data;
52         unsigned char *b_data;
53         unsigned short use_sg;  /* zero or max number of s/g segments for this adapter */
54         unsigned short sg_segs;         /* number of segments in s/g list */
55         unsigned short frp_segs;        /* number of buffer segments */
56 };
57
58 /* The tape mode definition */
59 struct st_modedef {
60         unsigned char defined;
61         unsigned char sysv;     /* SYS V semantics? */
62         unsigned char do_async_writes;
63         unsigned char do_buffer_writes;
64         unsigned char do_read_ahead;
65         unsigned char defaults_for_writes;
66         unsigned char default_compression;      /* 0 = don't touch, etc */
67         short default_density;  /* Forced density, -1 = no value */
68         int default_blksize;    /* Forced blocksize, -1 = no value */
69         struct cdev *cdevs[2];  /* Auto-rewind and non-rewind devices */
70 };
71
72 /* Number of modes can be changed by changing ST_NBR_MODE_BITS. The maximum
73    number of modes is 16 (ST_NBR_MODE_BITS 4) */
74 #define ST_NBR_MODE_BITS 2
75 #define ST_NBR_MODES (1 << ST_NBR_MODE_BITS)
76 #define ST_MODE_SHIFT (7 - ST_NBR_MODE_BITS)
77 #define ST_MODE_MASK ((ST_NBR_MODES - 1) << ST_MODE_SHIFT)
78
79 #define ST_MAX_TAPES 128
80 #define ST_MAX_TAPE_ENTRIES  (ST_MAX_TAPES << (ST_NBR_MODE_BITS + 1))
81
82 /* The status related to each partition */
83 struct st_partstat {
84         unsigned char rw;
85         unsigned char eof;
86         unsigned char at_sm;
87         unsigned char last_block_valid;
88         u32 last_block_visited;
89         int drv_block;          /* The block where the drive head is */
90         int drv_file;
91 };
92
93 #define ST_NBR_PARTITIONS 4
94
95 /* The tape drive descriptor */
96 struct scsi_tape {
97         struct scsi_driver *driver;
98         struct scsi_device *device;
99         struct mutex lock;      /* For serialization */
100         struct completion wait; /* For SCSI commands */
101         struct st_buffer *buffer;
102
103         /* Drive characteristics */
104         unsigned char omit_blklims;
105         unsigned char do_auto_lock;
106         unsigned char can_bsr;
107         unsigned char can_partitions;
108         unsigned char two_fm;
109         unsigned char fast_mteom;
110         unsigned char immediate;
111         unsigned char restr_dma;
112         unsigned char scsi2_logical;
113         unsigned char default_drvbuffer;        /* 0xff = don't touch, value 3 bits */
114         unsigned char cln_mode;                 /* 0 = none, otherwise sense byte nbr */
115         unsigned char cln_sense_value;
116         unsigned char cln_sense_mask;
117         unsigned char use_pf;                   /* Set Page Format bit in all mode selects? */
118         unsigned char try_dio;                  /* try direct i/o in general? */
119         unsigned char try_dio_now;              /* try direct i/o before next close? */
120         unsigned char c_algo;                   /* compression algorithm */
121         unsigned char pos_unknown;                      /* after reset position unknown */
122         unsigned char sili;                     /* use SILI when reading in variable b mode */
123         unsigned char immediate_filemark;       /* write filemark immediately */
124         int tape_type;
125         int long_timeout;       /* timeout for commands known to take long time */
126
127         unsigned long max_pfn;  /* the maximum page number reachable by the HBA */
128
129         /* Mode characteristics */
130         struct st_modedef modes[ST_NBR_MODES];
131         int current_mode;
132
133         /* Status variables */
134         int partition;
135         int new_partition;
136         int nbr_partitions;     /* zero until partition support enabled */
137         struct st_partstat ps[ST_NBR_PARTITIONS];
138         unsigned char dirty;
139         unsigned char ready;
140         unsigned char write_prot;
141         unsigned char drv_write_prot;
142         unsigned char in_use;
143         unsigned char blksize_changed;
144         unsigned char density_changed;
145         unsigned char compression_changed;
146         unsigned char drv_buffer;
147         unsigned char density;
148         unsigned char door_locked;
149         unsigned char autorew_dev;   /* auto-rewind device */
150         unsigned char rew_at_close;  /* rewind necessary at close */
151         unsigned char inited;
152         unsigned char cleaning_req;  /* cleaning requested? */
153         int block_size;
154         int min_block;
155         int max_block;
156         int recover_count;     /* From tape opening */
157         int recover_reg;       /* From last status call */
158
159 #if DEBUG
160         unsigned char write_pending;
161         int nbr_finished;
162         int nbr_waits;
163         int nbr_requests;
164         int nbr_dio;
165         int nbr_pages;
166         unsigned char last_cmnd[6];
167         unsigned char last_sense[16];
168 #endif
169         struct gendisk *disk;
170         struct kref     kref;
171 };
172
173 /* Bit masks for use_pf */
174 #define USE_PF      1
175 #define PF_TESTED   2
176
177 /* Values of eof */
178 #define ST_NOEOF        0
179 #define ST_FM_HIT       1
180 #define ST_FM           2
181 #define ST_EOM_OK       3
182 #define ST_EOM_ERROR    4
183 #define ST_EOD_1        5
184 #define ST_EOD_2        6
185 #define ST_EOD          7
186 /* EOD hit while reading => ST_EOD_1 => return zero => ST_EOD_2 =>
187    return zero => ST_EOD, return ENOSPC */
188 /* When writing: ST_EOM_OK == early warning found, write OK
189                  ST_EOD_1  == allow trying new write after early warning
190                  ST_EOM_ERROR == early warning found, not able to write all */
191
192 /* Values of rw */
193 #define ST_IDLE         0
194 #define ST_READING      1
195 #define ST_WRITING      2
196
197 /* Values of ready state */
198 #define ST_READY        0
199 #define ST_NOT_READY    1
200 #define ST_NO_TAPE      2
201
202 /* Values for door lock state */
203 #define ST_UNLOCKED     0
204 #define ST_LOCKED_EXPLICIT 1
205 #define ST_LOCKED_AUTO  2
206 #define ST_LOCK_FAILS   3
207
208 /* Positioning SCSI-commands for Tandberg, etc. drives */
209 #define QFA_REQUEST_BLOCK       0x02
210 #define QFA_SEEK_BLOCK          0x0c
211
212 /* Setting the binary options */
213 #define ST_DONT_TOUCH  0
214 #define ST_NO          1
215 #define ST_YES         2
216
217 #define EXTENDED_SENSE_START  18
218
219 /* Masks for some conditions in the sense data */
220 #define SENSE_FMK   0x80
221 #define SENSE_EOM   0x40
222 #define SENSE_ILI   0x20
223
224 #endif