5 #include <linux/completion.h>
6 #include <linux/mutex.h>
7 #include <linux/kref.h>
8 #include <scsi/scsi_cmnd.h>
10 /* Descriptor for analyzed sense data */
13 struct scsi_sense_hdr sense_hdr;
25 /* scsi tape command */
27 unsigned char cmd[MAX_COMMAND_SIZE];
28 unsigned char sense[SCSI_SENSE_BUFFERSIZE];
30 struct scsi_tape *stp;
31 struct completion *waiting;
34 /* The tape buffer descriptor. */
36 unsigned char dma; /* DMA-able buffer */
37 unsigned char do_dio; /* direct i/o set up? */
38 unsigned char cleared; /* internal buffer cleared after open? */
45 struct st_request *last_SRpnt;
46 struct st_cmdstatus cmdstat;
47 unsigned char *b_data;
48 unsigned short use_sg; /* zero or max number of s/g segments for this adapter */
49 unsigned short sg_segs; /* number of segments in s/g list */
50 unsigned short orig_frp_segs; /* number of segments allocated at first try */
51 unsigned short frp_segs; /* number of buffer segments */
52 unsigned int frp_sg_current; /* driver buffer length currently in s/g list */
53 struct st_buf_fragment *frp; /* the allocated buffer fragment list */
54 struct scatterlist sg[1]; /* MUST BE last item */
57 /* The tape buffer fragment descriptor */
58 struct st_buf_fragment {
63 /* The tape mode definition */
65 unsigned char defined;
66 unsigned char sysv; /* SYS V semantics? */
67 unsigned char do_async_writes;
68 unsigned char do_buffer_writes;
69 unsigned char do_read_ahead;
70 unsigned char defaults_for_writes;
71 unsigned char default_compression; /* 0 = don't touch, etc */
72 short default_density; /* Forced density, -1 = no value */
73 int default_blksize; /* Forced blocksize, -1 = no value */
74 struct cdev *cdevs[2]; /* Auto-rewind and non-rewind devices */
77 /* Number of modes can be changed by changing ST_NBR_MODE_BITS. The maximum
78 number of modes is 16 (ST_NBR_MODE_BITS 4) */
79 #define ST_NBR_MODE_BITS 2
80 #define ST_NBR_MODES (1 << ST_NBR_MODE_BITS)
81 #define ST_MODE_SHIFT (7 - ST_NBR_MODE_BITS)
82 #define ST_MODE_MASK ((ST_NBR_MODES - 1) << ST_MODE_SHIFT)
84 #define ST_MAX_TAPES 128
85 #define ST_MAX_TAPE_ENTRIES (ST_MAX_TAPES << (ST_NBR_MODE_BITS + 1))
87 /* The status related to each partition */
92 unsigned char last_block_valid;
93 u32 last_block_visited;
94 int drv_block; /* The block where the drive head is */
98 #define ST_NBR_PARTITIONS 4
100 /* The tape drive descriptor */
102 struct scsi_driver *driver;
103 struct scsi_device *device;
104 struct mutex lock; /* For serialization */
105 struct completion wait; /* For SCSI commands */
106 struct st_buffer *buffer;
108 /* Drive characteristics */
109 unsigned char omit_blklims;
110 unsigned char do_auto_lock;
111 unsigned char can_bsr;
112 unsigned char can_partitions;
113 unsigned char two_fm;
114 unsigned char fast_mteom;
115 unsigned char immediate;
116 unsigned char restr_dma;
117 unsigned char scsi2_logical;
118 unsigned char default_drvbuffer; /* 0xff = don't touch, value 3 bits */
119 unsigned char cln_mode; /* 0 = none, otherwise sense byte nbr */
120 unsigned char cln_sense_value;
121 unsigned char cln_sense_mask;
122 unsigned char use_pf; /* Set Page Format bit in all mode selects? */
123 unsigned char try_dio; /* try direct i/o in general? */
124 unsigned char try_dio_now; /* try direct i/o before next close? */
125 unsigned char c_algo; /* compression algorithm */
126 unsigned char pos_unknown; /* after reset position unknown */
127 unsigned char sili; /* use SILI when reading in variable b mode */
129 int long_timeout; /* timeout for commands known to take long time */
131 unsigned long max_pfn; /* the maximum page number reachable by the HBA */
133 /* Mode characteristics */
134 struct st_modedef modes[ST_NBR_MODES];
137 /* Status variables */
140 int nbr_partitions; /* zero until partition support enabled */
141 struct st_partstat ps[ST_NBR_PARTITIONS];
144 unsigned char write_prot;
145 unsigned char drv_write_prot;
146 unsigned char in_use;
147 unsigned char blksize_changed;
148 unsigned char density_changed;
149 unsigned char compression_changed;
150 unsigned char drv_buffer;
151 unsigned char density;
152 unsigned char door_locked;
153 unsigned char autorew_dev; /* auto-rewind device */
154 unsigned char rew_at_close; /* rewind necessary at close */
155 unsigned char inited;
156 unsigned char cleaning_req; /* cleaning requested? */
160 int recover_count; /* From tape opening */
161 int recover_reg; /* From last status call */
164 unsigned char write_pending;
170 unsigned char last_cmnd[6];
171 unsigned char last_sense[16];
173 struct gendisk *disk;
177 /* Bit masks for use_pf */
186 #define ST_EOM_ERROR 4
190 /* EOD hit while reading => ST_EOD_1 => return zero => ST_EOD_2 =>
191 return zero => ST_EOD, return ENOSPC */
192 /* When writing: ST_EOM_OK == early warning found, write OK
193 ST_EOD_1 == allow trying new write after early warning
194 ST_EOM_ERROR == early warning found, not able to write all */
201 /* Values of ready state */
203 #define ST_NOT_READY 1
206 /* Values for door lock state */
207 #define ST_UNLOCKED 0
208 #define ST_LOCKED_EXPLICIT 1
209 #define ST_LOCKED_AUTO 2
210 #define ST_LOCK_FAILS 3
212 /* Positioning SCSI-commands for Tandberg, etc. drives */
213 #define QFA_REQUEST_BLOCK 0x02
214 #define QFA_SEEK_BLOCK 0x0c
216 /* Setting the binary options */
217 #define ST_DONT_TOUCH 0
221 #define EXTENDED_SENSE_START 18
223 /* Masks for some conditions in the sense data */
224 #define SENSE_FMK 0x80
225 #define SENSE_EOM 0x40
226 #define SENSE_ILI 0x20