drivers/scsi/bnx2i/bnx2i_hwi.c

   1 /* bnx2i_hwi.c: Broadcom NetXtreme II iSCSI driver.
   2  *
   3  * Copyright (c) 2006 - 2012 Broadcom Corporation
   4  * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
   5  * Copyright (c) 2007, 2008 Mike Christie
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation.
  10  *
  11  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
  12  * Maintained by: Eddie Wai (eddie.wai@broadcom.com)
  13  */
  14
  15 #include <linux/gfp.h>
  16 #include <scsi/scsi_tcq.h>
  17 #include <scsi/libiscsi.h>
  18 #include "bnx2i.h"
  19
  20 DECLARE_PER_CPU(struct bnx2i_percpu_s, bnx2i_percpu);
  21
  22 /**
  23  * bnx2i_get_cid_num - get cid from ep
  24  * @ep:         endpoint pointer
  25  *
  26  * Only applicable to 57710 family of devices
  27  */
  28 static u32 bnx2i_get_cid_num(struct bnx2i_endpoint *ep)
  29 {
  30         u32 cid;
  31
  32         if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
  33                 cid = ep->ep_cid;
  34         else
  35                 cid = GET_CID_NUM(ep->ep_cid);
  36         return cid;
  37 }
  38
  39
  40 /**
  41  * bnx2i_adjust_qp_size - Adjust SQ/RQ/CQ size for 57710 device type
  42  * @hba:                Adapter for which adjustments is to be made
  43  *
  44  * Only applicable to 57710 family of devices
  45  */
  46 static void bnx2i_adjust_qp_size(struct bnx2i_hba *hba)
  47 {
  48         u32 num_elements_per_pg;
  49
  50         if (test_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type) ||
  51             test_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type) ||
  52             test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) {
  53                 if (!is_power_of_2(hba->max_sqes))
  54                         hba->max_sqes = rounddown_pow_of_two(hba->max_sqes);
  55
  56                 if (!is_power_of_2(hba->max_rqes))
  57                         hba->max_rqes = rounddown_pow_of_two(hba->max_rqes);
  58         }
  59
  60         /* Adjust each queue size if the user selection does not
  61          * yield integral num of page buffers
  62          */
  63         /* adjust SQ */
  64         num_elements_per_pg = PAGE_SIZE / BNX2I_SQ_WQE_SIZE;
  65         if (hba->max_sqes < num_elements_per_pg)
  66                 hba->max_sqes = num_elements_per_pg;
  67         else if (hba->max_sqes % num_elements_per_pg)
  68                 hba->max_sqes = (hba->max_sqes + num_elements_per_pg - 1) &
  69                                  ~(num_elements_per_pg - 1);
  70
  71         /* adjust CQ */
  72         num_elements_per_pg = PAGE_SIZE / BNX2I_CQE_SIZE;
  73         if (hba->max_cqes < num_elements_per_pg)
  74                 hba->max_cqes = num_elements_per_pg;
  75         else if (hba->max_cqes % num_elements_per_pg)
  76                 hba->max_cqes = (hba->max_cqes + num_elements_per_pg - 1) &
  77                                  ~(num_elements_per_pg - 1);
  78
  79         /* adjust RQ */
  80         num_elements_per_pg = PAGE_SIZE / BNX2I_RQ_WQE_SIZE;
  81         if (hba->max_rqes < num_elements_per_pg)
  82                 hba->max_rqes = num_elements_per_pg;
  83         else if (hba->max_rqes % num_elements_per_pg)
  84                 hba->max_rqes = (hba->max_rqes + num_elements_per_pg - 1) &
  85                                  ~(num_elements_per_pg - 1);
  86 }
  87
  88
  89 /**
  90  * bnx2i_get_link_state - get network interface link state
  91  * @hba:        adapter instance pointer
  92  *
  93  * updates adapter structure flag based on netdev state
  94  */
  95 static void bnx2i_get_link_state(struct bnx2i_hba *hba)
  96 {
  97         if (test_bit(__LINK_STATE_NOCARRIER, &hba->netdev->state))
  98                 set_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state);
  99         else
 100                 clear_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state);
 101 }
 102
 103
 104 /**
 105  * bnx2i_iscsi_license_error - displays iscsi license related error message
 106  * @hba:                adapter instance pointer
 107  * @error_code:         error classification
 108  *
 109  * Puts out an error log when driver is unable to offload iscsi connection
 110  *      due to license restrictions
 111  */
 112 static void bnx2i_iscsi_license_error(struct bnx2i_hba *hba, u32 error_code)
 113 {
 114         if (error_code == ISCSI_KCQE_COMPLETION_STATUS_ISCSI_NOT_SUPPORTED)
 115                 /* iSCSI offload not supported on this device */
 116                 printk(KERN_ERR "bnx2i: iSCSI not supported, dev=%s\n",
 117                                 hba->netdev->name);
 118         if (error_code == ISCSI_KCQE_COMPLETION_STATUS_LOM_ISCSI_NOT_ENABLED)
 119                 /* iSCSI offload not supported on this LOM device */
 120                 printk(KERN_ERR "bnx2i: LOM is not enable to "
 121                                 "offload iSCSI connections, dev=%s\n",
 122                                 hba->netdev->name);
 123         set_bit(ADAPTER_STATE_INIT_FAILED, &hba->adapter_state);
 124 }
 125
 126
 127 /**
 128  * bnx2i_arm_cq_event_coalescing - arms CQ to enable EQ notification
 129  * @ep:         endpoint (transport indentifier) structure
 130  * @action:     action, ARM or DISARM. For now only ARM_CQE is used
 131  *
 132  * Arm'ing CQ will enable chip to generate global EQ events inorder to interrupt
 133  *      the driver. EQ event is generated CQ index is hit or at least 1 CQ is
 134  *      outstanding and on chip timer expires
 135  */
 136 int bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action)
 137 {
 138         struct bnx2i_5771x_cq_db *cq_db;
 139         u16 cq_index;
 140         u16 next_index = 0;
 141         u32 num_active_cmds;
 142
 143         /* Coalesce CQ entries only on 10G devices */
 144         if (!test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
 145                 return 0;
 146
 147         /* Do not update CQ DB multiple times before firmware writes
 148          * '0xFFFF' to CQDB->SQN field. Deviation may cause spurious
 149          * interrupts and other unwanted results
 150          */
 151         cq_db = (struct bnx2i_5771x_cq_db *) ep->qp.cq_pgtbl_virt;
 152
 153         if (action != CNIC_ARM_CQE_FP)
 154                 if (cq_db->sqn[0] && cq_db->sqn[0] != 0xFFFF)
 155                         return 0;
 156
 157         if (action == CNIC_ARM_CQE || action == CNIC_ARM_CQE_FP) {
 158                 num_active_cmds = atomic_read(&ep->num_active_cmds);
 159                 if (num_active_cmds <= event_coal_min)
 160                         next_index = 1;
 161                 else {
 162                         next_index = num_active_cmds >> ep->ec_shift;
 163                         if (next_index > num_active_cmds - event_coal_min)
 164                                 next_index = num_active_cmds - event_coal_min;
 165                 }
 166                 if (!next_index)
 167                         next_index = 1;
 168                 cq_index = ep->qp.cqe_exp_seq_sn + next_index - 1;
 169                 if (cq_index > ep->qp.cqe_size * 2)
 170                         cq_index -= ep->qp.cqe_size * 2;
 171                 if (!cq_index)
 172                         cq_index = 1;
 173
 174                 cq_db->sqn[0] = cq_index;
 175         }
 176         return next_index;
 177 }
 178
 179
 180 /**
 181  * bnx2i_get_rq_buf - copy RQ buffer contents to driver buffer
 182  * @conn:               iscsi connection on which RQ event occurred
 183  * @ptr:                driver buffer to which RQ buffer contents is to
 184  *                      be copied
 185  * @len:                length of valid data inside RQ buf
 186  *
 187  * Copies RQ buffer contents from shared (DMA'able) memory region to
 188  *      driver buffer. RQ is used to DMA unsolicitated iscsi pdu's and
 189  *      scsi sense info
 190  */
 191 void bnx2i_get_rq_buf(struct bnx2i_conn *bnx2i_conn, char *ptr, int len)
 192 {
 193         if (!bnx2i_conn->ep->qp.rqe_left)
 194                 return;
 195
 196         bnx2i_conn->ep->qp.rqe_left--;
 197         memcpy(ptr, (u8 *) bnx2i_conn->ep->qp.rq_cons_qe, len);
 198         if (bnx2i_conn->ep->qp.rq_cons_qe == bnx2i_conn->ep->qp.rq_last_qe) {
 199                 bnx2i_conn->ep->qp.rq_cons_qe = bnx2i_conn->ep->qp.rq_first_qe;
 200                 bnx2i_conn->ep->qp.rq_cons_idx = 0;
 201         } else {
 202                 bnx2i_conn->ep->qp.rq_cons_qe++;
 203                 bnx2i_conn->ep->qp.rq_cons_idx++;
 204         }
 205 }
 206
 207
 208 static void bnx2i_ring_577xx_doorbell(struct bnx2i_conn *conn)
 209 {
 210         struct bnx2i_5771x_dbell dbell;
 211         u32 msg;
 212
 213         memset(&dbell, 0, sizeof(dbell));
 214         dbell.dbell.header = (B577XX_ISCSI_CONNECTION_TYPE <<
 215                               B577XX_DOORBELL_HDR_CONN_TYPE_SHIFT);
 216         msg = *((u32 *)&dbell);
 217         /* TODO : get doorbell register mapping */
 218         writel(cpu_to_le32(msg), conn->ep->qp.ctx_base);
 219 }
 220
 221
 222 /**
 223  * bnx2i_put_rq_buf - Replenish RQ buffer, if required ring on chip doorbell
 224  * @conn:       iscsi connection on which event to post
 225  * @count:      number of RQ buffer being posted to chip
 226  *
 227  * No need to ring hardware doorbell for 57710 family of devices
 228  */
 229 void bnx2i_put_rq_buf(struct bnx2i_conn *bnx2i_conn, int count)
 230 {
 231         struct bnx2i_5771x_sq_rq_db *rq_db;
 232         u16 hi_bit = (bnx2i_conn->ep->qp.rq_prod_idx & 0x8000);
 233         struct bnx2i_endpoint *ep = bnx2i_conn->ep;
 234
 235         ep->qp.rqe_left += count;
 236         ep->qp.rq_prod_idx &= 0x7FFF;
 237         ep->qp.rq_prod_idx += count;
 238
 239         if (ep->qp.rq_prod_idx > bnx2i_conn->hba->max_rqes) {
 240                 ep->qp.rq_prod_idx %= bnx2i_conn->hba->max_rqes;
 241                 if (!hi_bit)
 242                         ep->qp.rq_prod_idx |= 0x8000;
 243         } else
 244                 ep->qp.rq_prod_idx |= hi_bit;
 245
 246         if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
 247                 rq_db = (struct bnx2i_5771x_sq_rq_db *) ep->qp.rq_pgtbl_virt;
 248                 rq_db->prod_idx = ep->qp.rq_prod_idx;
 249                 /* no need to ring hardware doorbell for 57710 */
 250         } else {
 251                 writew(ep->qp.rq_prod_idx,
 252                        ep->qp.ctx_base + CNIC_RECV_DOORBELL);
 253         }
 254         mmiowb();
 255 }
 256
 257
 258 /**
 259  * bnx2i_ring_sq_dbell - Ring SQ doorbell to wake-up the processing engine
 260  * @conn:               iscsi connection to which new SQ entries belong
 261  * @count:              number of SQ WQEs to post
 262  *
 263  * SQ DB is updated in host memory and TX Doorbell is rung for 57710 family
 264  *      of devices. For 5706/5708/5709 new SQ WQE count is written into the
 265  *      doorbell register
 266  */
 267 static void bnx2i_ring_sq_dbell(struct bnx2i_conn *bnx2i_conn, int count)
 268 {
 269         struct bnx2i_5771x_sq_rq_db *sq_db;
 270         struct bnx2i_endpoint *ep = bnx2i_conn->ep;
 271
 272         atomic_inc(&ep->num_active_cmds);
 273         wmb();  /* flush SQ WQE memory before the doorbell is rung */
 274         if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
 275                 sq_db = (struct bnx2i_5771x_sq_rq_db *) ep->qp.sq_pgtbl_virt;
 276                 sq_db->prod_idx = ep->qp.sq_prod_idx;
 277                 bnx2i_ring_577xx_doorbell(bnx2i_conn);
 278         } else
 279                 writew(count, ep->qp.ctx_base + CNIC_SEND_DOORBELL);
 280
 281         mmiowb(); /* flush posted PCI writes */
 282 }
 283
 284
 285 /**
 286  * bnx2i_ring_dbell_update_sq_params - update SQ driver parameters
 287  * @conn:       iscsi connection to which new SQ entries belong
 288  * @count:      number of SQ WQEs to post
 289  *
 290  * this routine will update SQ driver parameters and ring the doorbell
 291  */
 292 static void bnx2i_ring_dbell_update_sq_params(struct bnx2i_conn *bnx2i_conn,
 293                                               int count)
 294 {
 295         int tmp_cnt;
 296
 297         if (count == 1) {
 298                 if (bnx2i_conn->ep->qp.sq_prod_qe ==
 299                     bnx2i_conn->ep->qp.sq_last_qe)
 300                         bnx2i_conn->ep->qp.sq_prod_qe =
 301                                                 bnx2i_conn->ep->qp.sq_first_qe;
 302                 else
 303                         bnx2i_conn->ep->qp.sq_prod_qe++;
 304         } else {
 305                 if ((bnx2i_conn->ep->qp.sq_prod_qe + count) <=
 306                     bnx2i_conn->ep->qp.sq_last_qe)
 307                         bnx2i_conn->ep->qp.sq_prod_qe += count;
 308                 else {
 309                         tmp_cnt = bnx2i_conn->ep->qp.sq_last_qe -
 310                                 bnx2i_conn->ep->qp.sq_prod_qe;
 311                         bnx2i_conn->ep->qp.sq_prod_qe =
 312                                 &bnx2i_conn->ep->qp.sq_first_qe[count -
 313                                                                 (tmp_cnt + 1)];
 314                 }
 315         }
 316         bnx2i_conn->ep->qp.sq_prod_idx += count;
 317         /* Ring the doorbell */
 318         bnx2i_ring_sq_dbell(bnx2i_conn, bnx2i_conn->ep->qp.sq_prod_idx);
 319 }
 320
 321
 322 /**
 323  * bnx2i_send_iscsi_login - post iSCSI login request MP WQE to hardware
 324  * @conn:       iscsi connection
 325  * @cmd:        driver command structure which is requesting
 326  *              a WQE to sent to chip for further processing
 327  *
 328  * prepare and post an iSCSI Login request WQE to CNIC firmware
 329  */
 330 int bnx2i_send_iscsi_login(struct bnx2i_conn *bnx2i_conn,
 331                            struct iscsi_task *task)
 332 {
 333         struct bnx2i_cmd *bnx2i_cmd;
 334         struct bnx2i_login_request *login_wqe;
 335         struct iscsi_login_req *login_hdr;
 336         u32 dword;
 337
 338         bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
 339         login_hdr = (struct iscsi_login_req *)task->hdr;
 340         login_wqe = (struct bnx2i_login_request *)
 341                                                 bnx2i_conn->ep->qp.sq_prod_qe;
 342
 343         login_wqe->op_code = login_hdr->opcode;
 344         login_wqe->op_attr = login_hdr->flags;
 345         login_wqe->version_max = login_hdr->max_version;
 346         login_wqe->version_min = login_hdr->min_version;
 347         login_wqe->data_length = ntoh24(login_hdr->dlength);
 348         login_wqe->isid_lo = *((u32 *) login_hdr->isid);
 349         login_wqe->isid_hi = *((u16 *) login_hdr->isid + 2);
 350         login_wqe->tsih = login_hdr->tsih;
 351         login_wqe->itt = task->itt |
 352                 (ISCSI_TASK_TYPE_MPATH << ISCSI_LOGIN_REQUEST_TYPE_SHIFT);
 353         login_wqe->cid = login_hdr->cid;
 354
 355         login_wqe->cmd_sn = be32_to_cpu(login_hdr->cmdsn);
 356         login_wqe->exp_stat_sn = be32_to_cpu(login_hdr->exp_statsn);
 357         login_wqe->flags = ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN;
 358
 359         login_wqe->resp_bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.resp_bd_dma;
 360         login_wqe->resp_bd_list_addr_hi =
 361                 (u32) ((u64) bnx2i_conn->gen_pdu.resp_bd_dma >> 32);
 362
 363         dword = ((1 << ISCSI_LOGIN_REQUEST_NUM_RESP_BDS_SHIFT) |
 364                  (bnx2i_conn->gen_pdu.resp_buf_size <<
 365                   ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH_SHIFT));
 366         login_wqe->resp_buffer = dword;
 367         login_wqe->bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.req_bd_dma;
 368         login_wqe->bd_list_addr_hi =
 369                 (u32) ((u64) bnx2i_conn->gen_pdu.req_bd_dma >> 32);
 370         login_wqe->num_bds = 1;
 371         login_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
 372
 373         bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
 374         return 0;
 375 }
 376
 377 /**
 378  * bnx2i_send_iscsi_tmf - post iSCSI task management request MP WQE to hardware
 379  * @conn:       iscsi connection
 380  * @mtask:      driver command structure which is requesting
 381  *              a WQE to sent to chip for further processing
 382  *
 383  * prepare and post an iSCSI Login request WQE to CNIC firmware
 384  */
 385 int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
 386                          struct iscsi_task *mtask)
 387 {
 388         struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
 389         struct iscsi_tm *tmfabort_hdr;
 390         struct scsi_cmnd *ref_sc;
 391         struct iscsi_task *ctask;
 392         struct bnx2i_cmd *bnx2i_cmd;
 393         struct bnx2i_tmf_request *tmfabort_wqe;
 394         u32 dword;
 395         u32 scsi_lun[2];
 396
 397         bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data;
 398         tmfabort_hdr = (struct iscsi_tm *)mtask->hdr;
 399         tmfabort_wqe = (struct bnx2i_tmf_request *)
 400                                                 bnx2i_conn->ep->qp.sq_prod_qe;
 401
 402         tmfabort_wqe->op_code = tmfabort_hdr->opcode;
 403         tmfabort_wqe->op_attr = tmfabort_hdr->flags;
 404
 405         tmfabort_wqe->itt = (mtask->itt | (ISCSI_TASK_TYPE_MPATH << 14));
 406         tmfabort_wqe->reserved2 = 0;
 407         tmfabort_wqe->cmd_sn = be32_to_cpu(tmfabort_hdr->cmdsn);
 408
 409         switch (tmfabort_hdr->flags & ISCSI_FLAG_TM_FUNC_MASK) {
 410         case ISCSI_TM_FUNC_ABORT_TASK:
 411         case ISCSI_TM_FUNC_TASK_REASSIGN:
 412                 ctask = iscsi_itt_to_task(conn, tmfabort_hdr->rtt);
 413                 if (!ctask || !ctask->sc)
 414                         /*
 415                          * the iscsi layer must have completed the cmd while
 416                          * was starting up.
 417                          *
 418                          * Note: In the case of a SCSI cmd timeout, the task's
 419                          *       sc is still active; hence ctask->sc != 0
 420                          *       In this case, the task must be aborted
 421                          */
 422                         return 0;
 423
 424                 ref_sc = ctask->sc;
 425                 if (ref_sc->sc_data_direction == DMA_TO_DEVICE)
 426                         dword = (ISCSI_TASK_TYPE_WRITE <<
 427                                  ISCSI_CMD_REQUEST_TYPE_SHIFT);
 428                 else
 429                         dword = (ISCSI_TASK_TYPE_READ <<
 430                                  ISCSI_CMD_REQUEST_TYPE_SHIFT);
 431                 tmfabort_wqe->ref_itt = (dword |
 432                                         (tmfabort_hdr->rtt & ISCSI_ITT_MASK));
 433                 break;
 434         default:
 435                 tmfabort_wqe->ref_itt = RESERVED_ITT;
 436         }
 437         memcpy(scsi_lun, &tmfabort_hdr->lun, sizeof(struct scsi_lun));
 438         tmfabort_wqe->lun[0] = be32_to_cpu(scsi_lun[0]);
 439         tmfabort_wqe->lun[1] = be32_to_cpu(scsi_lun[1]);
 440
 441         tmfabort_wqe->ref_cmd_sn = be32_to_cpu(tmfabort_hdr->refcmdsn);
 442
 443         tmfabort_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;
 444         tmfabort_wqe->bd_list_addr_hi = (u32)
 445                                 ((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
 446         tmfabort_wqe->num_bds = 1;
 447         tmfabort_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
 448
 449         bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
 450         return 0;
 451 }
 452
 453 /**
 454  * bnx2i_send_iscsi_text - post iSCSI text WQE to hardware
 455  * @conn:       iscsi connection
 456  * @mtask:      driver command structure which is requesting
 457  *              a WQE to sent to chip for further processing
 458  *
 459  * prepare and post an iSCSI Text request WQE to CNIC firmware
 460  */
 461 int bnx2i_send_iscsi_text(struct bnx2i_conn *bnx2i_conn,
 462                           struct iscsi_task *mtask)
 463 {
 464         struct bnx2i_cmd *bnx2i_cmd;
 465         struct bnx2i_text_request *text_wqe;
 466         struct iscsi_text *text_hdr;
 467         u32 dword;
 468
 469         bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data;
 470         text_hdr = (struct iscsi_text *)mtask->hdr;
 471         text_wqe = (struct bnx2i_text_request *) bnx2i_conn->ep->qp.sq_prod_qe;
 472
 473         memset(text_wqe, 0, sizeof(struct bnx2i_text_request));
 474
 475         text_wqe->op_code = text_hdr->opcode;
 476         text_wqe->op_attr = text_hdr->flags;
 477         text_wqe->data_length = ntoh24(text_hdr->dlength);
 478         text_wqe->itt = mtask->itt |
 479                 (ISCSI_TASK_TYPE_MPATH << ISCSI_TEXT_REQUEST_TYPE_SHIFT);
 480         text_wqe->ttt = be32_to_cpu(text_hdr->ttt);
 481
 482         text_wqe->cmd_sn = be32_to_cpu(text_hdr->cmdsn);
 483
 484         text_wqe->resp_bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.resp_bd_dma;
 485         text_wqe->resp_bd_list_addr_hi =
 486                         (u32) ((u64) bnx2i_conn->gen_pdu.resp_bd_dma >> 32);
 487
 488         dword = ((1 << ISCSI_TEXT_REQUEST_NUM_RESP_BDS_SHIFT) |
 489                  (bnx2i_conn->gen_pdu.resp_buf_size <<
 490                   ISCSI_TEXT_REQUEST_RESP_BUFFER_LENGTH_SHIFT));
 491         text_wqe->resp_buffer = dword;
 492         text_wqe->bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.req_bd_dma;
 493         text_wqe->bd_list_addr_hi =
 494                         (u32) ((u64) bnx2i_conn->gen_pdu.req_bd_dma >> 32);
 495         text_wqe->num_bds = 1;
 496         text_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
 497
 498         bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
 499         return 0;
 500 }
 501
 502
 503 /**
 504  * bnx2i_send_iscsi_scsicmd - post iSCSI scsicmd request WQE to hardware
 505  * @conn:       iscsi connection
 506  * @cmd:        driver command structure which is requesting
 507  *              a WQE to sent to chip for further processing
 508  *
 509  * prepare and post an iSCSI SCSI-CMD request WQE to CNIC firmware
 510  */
 511 int bnx2i_send_iscsi_scsicmd(struct bnx2i_conn *bnx2i_conn,
 512                              struct bnx2i_cmd *cmd)
 513 {
 514         struct bnx2i_cmd_request *scsi_cmd_wqe;
 515
 516         scsi_cmd_wqe = (struct bnx2i_cmd_request *)
 517                                                 bnx2i_conn->ep->qp.sq_prod_qe;
 518         memcpy(scsi_cmd_wqe, &cmd->req, sizeof(struct bnx2i_cmd_request));
 519         scsi_cmd_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
 520
 521         bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
 522         return 0;
 523 }
 524
 525 /**
 526  * bnx2i_send_iscsi_nopout - post iSCSI NOPOUT request WQE to hardware
 527  * @conn:               iscsi connection
 528  * @cmd:                driver command structure which is requesting
 529  *                      a WQE to sent to chip for further processing
 530  * @datap:              payload buffer pointer
 531  * @data_len:           payload data length
 532  * @unsol:              indicated whether nopout pdu is unsolicited pdu or
 533  *                      in response to target's NOPIN w/ TTT != FFFFFFFF
 534  *
 535  * prepare and post a nopout request WQE to CNIC firmware
 536  */
 537 int bnx2i_send_iscsi_nopout(struct bnx2i_conn *bnx2i_conn,
 538                             struct iscsi_task *task,
 539                             char *datap, int data_len, int unsol)
 540 {
 541         struct bnx2i_endpoint *ep = bnx2i_conn->ep;
 542         struct bnx2i_cmd *bnx2i_cmd;
 543         struct bnx2i_nop_out_request *nopout_wqe;
 544         struct iscsi_nopout *nopout_hdr;
 545
 546         bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
 547         nopout_hdr = (struct iscsi_nopout *)task->hdr;
 548         nopout_wqe = (struct bnx2i_nop_out_request *)ep->qp.sq_prod_qe;
 549
 550         memset(nopout_wqe, 0x00, sizeof(struct bnx2i_nop_out_request));
 551
 552         nopout_wqe->op_code = nopout_hdr->opcode;
 553         nopout_wqe->op_attr = ISCSI_FLAG_CMD_FINAL;
 554         memcpy(nopout_wqe->lun, &nopout_hdr->lun, 8);
 555
 556         if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
 557                 u32 tmp = nopout_wqe->lun[0];
 558                 /* 57710 requires LUN field to be swapped */
 559                 nopout_wqe->lun[0] = nopout_wqe->lun[1];
 560                 nopout_wqe->lun[1] = tmp;
 561         }
 562
 563         nopout_wqe->itt = ((u16)task->itt |
 564                            (ISCSI_TASK_TYPE_MPATH <<
 565                             ISCSI_TMF_REQUEST_TYPE_SHIFT));
 566         nopout_wqe->ttt = be32_to_cpu(nopout_hdr->ttt);
 567         nopout_wqe->flags = 0;
 568         if (!unsol)
 569                 nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
 570         else if (nopout_hdr->itt == RESERVED_ITT)
 571                 nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
 572
 573         nopout_wqe->cmd_sn = be32_to_cpu(nopout_hdr->cmdsn);
 574         nopout_wqe->data_length = data_len;
 575         if (data_len) {
 576                 /* handle payload data, not required in first release */
 577                 printk(KERN_ALERT "NOPOUT: WARNING!! payload len != 0\n");
 578         } else {
 579                 nopout_wqe->bd_list_addr_lo = (u32)
 580                                         bnx2i_conn->hba->mp_bd_dma;
 581                 nopout_wqe->bd_list_addr_hi =
 582                         (u32) ((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
 583                 nopout_wqe->num_bds = 1;
 584         }
 585         nopout_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
 586
 587         bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
 588         return 0;
 589 }
 590
 591
 592 /**
 593  * bnx2i_send_iscsi_logout - post iSCSI logout request WQE to hardware
 594  * @conn:       iscsi connection
 595  * @cmd:        driver command structure which is requesting
 596  *              a WQE to sent to chip for further processing
 597  *
 598  * prepare and post logout request WQE to CNIC firmware
 599  */
 600 int bnx2i_send_iscsi_logout(struct bnx2i_conn *bnx2i_conn,
 601                             struct iscsi_task *task)
 602 {
 603         struct bnx2i_cmd *bnx2i_cmd;
 604         struct bnx2i_logout_request *logout_wqe;
 605         struct iscsi_logout *logout_hdr;
 606
 607         bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
 608         logout_hdr = (struct iscsi_logout *)task->hdr;
 609
 610         logout_wqe = (struct bnx2i_logout_request *)
 611                                                 bnx2i_conn->ep->qp.sq_prod_qe;
 612         memset(logout_wqe, 0x00, sizeof(struct bnx2i_logout_request));
 613
 614         logout_wqe->op_code = logout_hdr->opcode;
 615         logout_wqe->cmd_sn = be32_to_cpu(logout_hdr->cmdsn);
 616         logout_wqe->op_attr =
 617                         logout_hdr->flags | ISCSI_LOGOUT_REQUEST_ALWAYS_ONE;
 618         logout_wqe->itt = ((u16)task->itt |
 619                            (ISCSI_TASK_TYPE_MPATH <<
 620                             ISCSI_LOGOUT_REQUEST_TYPE_SHIFT));
 621         logout_wqe->data_length = 0;
 622         logout_wqe->cid = 0;
 623
 624         logout_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;
 625         logout_wqe->bd_list_addr_hi = (u32)
 626                                 ((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
 627         logout_wqe->num_bds = 1;
 628         logout_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
 629
 630         bnx2i_conn->ep->state = EP_STATE_LOGOUT_SENT;
 631
 632         bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
 633         return 0;
 634 }
 635
 636
 637 /**
 638  * bnx2i_update_iscsi_conn - post iSCSI logout request WQE to hardware
 639  * @conn:       iscsi connection which requires iscsi parameter update
 640  *
 641  * sends down iSCSI Conn Update request to move iSCSI conn to FFP
 642  */
 643 void bnx2i_update_iscsi_conn(struct iscsi_conn *conn)
 644 {
 645         struct bnx2i_conn *bnx2i_conn = conn->dd_data;
 646         struct bnx2i_hba *hba = bnx2i_conn->hba;
 647         struct kwqe *kwqe_arr[2];
 648         struct iscsi_kwqe_conn_update *update_wqe;
 649         struct iscsi_kwqe_conn_update conn_update_kwqe;
 650
 651         update_wqe = &conn_update_kwqe;
 652
 653         update_wqe->hdr.op_code = ISCSI_KWQE_OPCODE_UPDATE_CONN;
 654         update_wqe->hdr.flags =
 655                 (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
 656
 657         /* 5771x requires conn context id to be passed as is */
 658         if (test_bit(BNX2I_NX2_DEV_57710, &bnx2i_conn->ep->hba->cnic_dev_type))
 659                 update_wqe->context_id = bnx2i_conn->ep->ep_cid;
 660         else
 661                 update_wqe->context_id = (bnx2i_conn->ep->ep_cid >> 7);
 662         update_wqe->conn_flags = 0;
 663         if (conn->hdrdgst_en)
 664                 update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST;
 665         if (conn->datadgst_en)
 666                 update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST;
 667         if (conn->session->initial_r2t_en)
 668                 update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T;
 669         if (conn->session->imm_data_en)
 670                 update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA;
 671
 672         update_wqe->max_send_pdu_length = conn->max_xmit_dlength;
 673         update_wqe->max_recv_pdu_length = conn->max_recv_dlength;
 674         update_wqe->first_burst_length = conn->session->first_burst;
 675         update_wqe->max_burst_length = conn->session->max_burst;
 676         update_wqe->exp_stat_sn = conn->exp_statsn;
 677         update_wqe->max_outstanding_r2ts = conn->session->max_r2t;
 678         update_wqe->session_error_recovery_level = conn->session->erl;
 679         iscsi_conn_printk(KERN_ALERT, conn,
 680                           "bnx2i: conn update - MBL 0x%x FBL 0x%x"
 681                           "MRDSL_I 0x%x MRDSL_T 0x%x \n",
 682                           update_wqe->max_burst_length,
 683                           update_wqe->first_burst_length,
 684                           update_wqe->max_recv_pdu_length,
 685                           update_wqe->max_send_pdu_length);
 686
 687         kwqe_arr[0] = (struct kwqe *) update_wqe;
 688         if (hba->cnic && hba->cnic->submit_kwqes)
 689                 hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 1);
 690 }
 691
 692
 693 /**
 694  * bnx2i_ep_ofld_timer - post iSCSI logout request WQE to hardware
 695  * @data:       endpoint (transport handle) structure pointer
 696  *
 697  * routine to handle connection offload/destroy request timeout
 698  */
 699 void bnx2i_ep_ofld_timer(unsigned long data)
 700 {
 701         struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) data;
 702
 703         if (ep->state == EP_STATE_OFLD_START) {
 704                 printk(KERN_ALERT "ofld_timer: CONN_OFLD timeout\n");
 705                 ep->state = EP_STATE_OFLD_FAILED;
 706         } else if (ep->state == EP_STATE_DISCONN_START) {
 707                 printk(KERN_ALERT "ofld_timer: CONN_DISCON timeout\n");
 708                 ep->state = EP_STATE_DISCONN_TIMEDOUT;
 709         } else if (ep->state == EP_STATE_CLEANUP_START) {
 710                 printk(KERN_ALERT "ofld_timer: CONN_CLEANUP timeout\n");
 711                 ep->state = EP_STATE_CLEANUP_FAILED;
 712         }
 713
 714         wake_up_interruptible(&ep->ofld_wait);
 715 }
 716
 717
 718 static int bnx2i_power_of2(u32 val)
 719 {
 720         u32 power = 0;
 721         if (val & (val - 1))
 722                 return power;
 723         val--;
 724         while (val) {
 725                 val = val >> 1;
 726                 power++;
 727         }
 728         return power;
 729 }
 730
 731
 732 /**
 733  * bnx2i_send_cmd_cleanup_req - send iscsi cmd context clean-up request
 734  * @hba:        adapter structure pointer
 735  * @cmd:        driver command structure which is requesting
 736  *              a WQE to sent to chip for further processing
 737  *
 738  * prepares and posts CONN_OFLD_REQ1/2 KWQE
 739  */
 740 void bnx2i_send_cmd_cleanup_req(struct bnx2i_hba *hba, struct bnx2i_cmd *cmd)
 741 {
 742         struct bnx2i_cleanup_request *cmd_cleanup;
 743
 744         cmd_cleanup =
 745                 (struct bnx2i_cleanup_request *)cmd->conn->ep->qp.sq_prod_qe;
 746         memset(cmd_cleanup, 0x00, sizeof(struct bnx2i_cleanup_request));
 747
 748         cmd_cleanup->op_code = ISCSI_OPCODE_CLEANUP_REQUEST;
 749         cmd_cleanup->itt = cmd->req.itt;
 750         cmd_cleanup->cq_index = 0; /* CQ# used for completion, 5771x only */
 751
 752         bnx2i_ring_dbell_update_sq_params(cmd->conn, 1);
 753 }
 754
 755
 756 /**
 757  * bnx2i_send_conn_destroy - initiates iscsi connection teardown process
 758  * @hba:        adapter structure pointer
 759  * @ep:         endpoint (transport indentifier) structure
 760  *
 761  * this routine prepares and posts CONN_OFLD_REQ1/2 KWQE to initiate
 762  *      iscsi connection context clean-up process
 763  */
 764 int bnx2i_send_conn_destroy(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
 765 {
 766         struct kwqe *kwqe_arr[2];
 767         struct iscsi_kwqe_conn_destroy conn_cleanup;
 768         int rc = -EINVAL;
 769
 770         memset(&conn_cleanup, 0x00, sizeof(struct iscsi_kwqe_conn_destroy));
 771
 772         conn_cleanup.hdr.op_code = ISCSI_KWQE_OPCODE_DESTROY_CONN;
 773         conn_cleanup.hdr.flags =
 774                 (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
 775         /* 5771x requires conn context id to be passed as is */
 776         if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
 777                 conn_cleanup.context_id = ep->ep_cid;
 778         else
 779                 conn_cleanup.context_id = (ep->ep_cid >> 7);
 780
 781         conn_cleanup.reserved0 = (u16)ep->ep_iscsi_cid;
 782
 783         kwqe_arr[0] = (struct kwqe *) &conn_cleanup;
 784         if (hba->cnic && hba->cnic->submit_kwqes)
 785                 rc = hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 1);
 786
 787         return rc;
 788 }
 789
 790
 791 /**
 792  * bnx2i_570x_send_conn_ofld_req - initiates iscsi conn context setup process
 793  * @hba:                adapter structure pointer
 794  * @ep:                 endpoint (transport indentifier) structure
 795  *
 796  * 5706/5708/5709 specific - prepares and posts CONN_OFLD_REQ1/2 KWQE
 797  */
 798 static int bnx2i_570x_send_conn_ofld_req(struct bnx2i_hba *hba,
 799                                          struct bnx2i_endpoint *ep)
 800 {
 801         struct kwqe *kwqe_arr[2];
 802         struct iscsi_kwqe_conn_offload1 ofld_req1;
 803         struct iscsi_kwqe_conn_offload2 ofld_req2;
 804         dma_addr_t dma_addr;
 805         int num_kwqes = 2;
 806         u32 *ptbl;
 807         int rc = -EINVAL;
 808
 809         ofld_req1.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN1;
 810         ofld_req1.hdr.flags =
 811                 (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
 812
 813         ofld_req1.iscsi_conn_id = (u16) ep->ep_iscsi_cid;
 814
 815         dma_addr = ep->qp.sq_pgtbl_phys;
 816         ofld_req1.sq_page_table_addr_lo = (u32) dma_addr;
 817         ofld_req1.sq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
 818
 819         dma_addr = ep->qp.cq_pgtbl_phys;
 820         ofld_req1.cq_page_table_addr_lo = (u32) dma_addr;
 821         ofld_req1.cq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
 822
 823         ofld_req2.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN2;
 824         ofld_req2.hdr.flags =
 825                 (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
 826
 827         dma_addr = ep->qp.rq_pgtbl_phys;
 828         ofld_req2.rq_page_table_addr_lo = (u32) dma_addr;
 829         ofld_req2.rq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
 830
 831         ptbl = (u32 *) ep->qp.sq_pgtbl_virt;
 832
 833         ofld_req2.sq_first_pte.hi = *ptbl++;
 834         ofld_req2.sq_first_pte.lo = *ptbl;
 835
 836         ptbl = (u32 *) ep->qp.cq_pgtbl_virt;
 837         ofld_req2.cq_first_pte.hi = *ptbl++;
 838         ofld_req2.cq_first_pte.lo = *ptbl;
 839
 840         kwqe_arr[0] = (struct kwqe *) &ofld_req1;
 841         kwqe_arr[1] = (struct kwqe *) &ofld_req2;
 842         ofld_req2.num_additional_wqes = 0;
 843
 844         if (hba->cnic && hba->cnic->submit_kwqes)
 845                 rc = hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
 846
 847         return rc;
 848 }
 849
 850
 851 /**
 852  * bnx2i_5771x_send_conn_ofld_req - initiates iscsi connection context creation
 853  * @hba:                adapter structure pointer
 854  * @ep:                 endpoint (transport indentifier) structure
 855  *
 856  * 57710 specific - prepares and posts CONN_OFLD_REQ1/2 KWQE
 857  */
 858 static int bnx2i_5771x_send_conn_ofld_req(struct bnx2i_hba *hba,
 859                                           struct bnx2i_endpoint *ep)
 860 {
 861         struct kwqe *kwqe_arr[5];
 862         struct iscsi_kwqe_conn_offload1 ofld_req1;
 863         struct iscsi_kwqe_conn_offload2 ofld_req2;
 864         struct iscsi_kwqe_conn_offload3 ofld_req3[1];
 865         dma_addr_t dma_addr;
 866         int num_kwqes = 2;
 867         u32 *ptbl;
 868         int rc = -EINVAL;
 869
 870         ofld_req1.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN1;
 871         ofld_req1.hdr.flags =
 872                 (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
 873
 874         ofld_req1.iscsi_conn_id = (u16) ep->ep_iscsi_cid;
 875
 876         dma_addr = ep->qp.sq_pgtbl_phys + ISCSI_SQ_DB_SIZE;
 877         ofld_req1.sq_page_table_addr_lo = (u32) dma_addr;
 878         ofld_req1.sq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
 879
 880         dma_addr = ep->qp.cq_pgtbl_phys + ISCSI_CQ_DB_SIZE;
 881         ofld_req1.cq_page_table_addr_lo = (u32) dma_addr;
 882         ofld_req1.cq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
 883
 884         ofld_req2.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN2;
 885         ofld_req2.hdr.flags =
 886                 (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
 887
 888         dma_addr = ep->qp.rq_pgtbl_phys + ISCSI_RQ_DB_SIZE;
 889         ofld_req2.rq_page_table_addr_lo = (u32) dma_addr;
 890         ofld_req2.rq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
 891
 892         ptbl = (u32 *)((u8 *)ep->qp.sq_pgtbl_virt + ISCSI_SQ_DB_SIZE);
 893         ofld_req2.sq_first_pte.hi = *ptbl++;
 894         ofld_req2.sq_first_pte.lo = *ptbl;
 895
 896         ptbl = (u32 *)((u8 *)ep->qp.cq_pgtbl_virt + ISCSI_CQ_DB_SIZE);
 897         ofld_req2.cq_first_pte.hi = *ptbl++;
 898         ofld_req2.cq_first_pte.lo = *ptbl;
 899
 900         kwqe_arr[0] = (struct kwqe *) &ofld_req1;
 901         kwqe_arr[1] = (struct kwqe *) &ofld_req2;
 902
 903         ofld_req2.num_additional_wqes = 1;
 904         memset(ofld_req3, 0x00, sizeof(ofld_req3[0]));
 905         ptbl = (u32 *)((u8 *)ep->qp.rq_pgtbl_virt + ISCSI_RQ_DB_SIZE);
 906         ofld_req3[0].qp_first_pte[0].hi = *ptbl++;
 907         ofld_req3[0].qp_first_pte[0].lo = *ptbl;
 908
 909         kwqe_arr[2] = (struct kwqe *) ofld_req3;
 910         /* need if we decide to go with multiple KCQE's per conn */
 911         num_kwqes += 1;
 912
 913         if (hba->cnic && hba->cnic->submit_kwqes)
 914                 rc = hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
 915
 916         return rc;
 917 }
 918
 919 /**
 920  * bnx2i_send_conn_ofld_req - initiates iscsi connection context setup process
 921  *
 922  * @hba:                adapter structure pointer
 923  * @ep:                 endpoint (transport indentifier) structure
 924  *
 925  * this routine prepares and posts CONN_OFLD_REQ1/2 KWQE
 926  */
 927 int bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
 928 {
 929         int rc;
 930
 931         if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
 932                 rc = bnx2i_5771x_send_conn_ofld_req(hba, ep);
 933         else
 934                 rc = bnx2i_570x_send_conn_ofld_req(hba, ep);
 935
 936         return rc;
 937 }
 938
 939
 940 /**
 941  * setup_qp_page_tables - iscsi QP page table setup function
 942  * @ep:         endpoint (transport indentifier) structure
 943  *
 944  * Sets up page tables for SQ/RQ/CQ, 1G/sec (5706/5708/5709) devices requires
 945  *      64-bit address in big endian format. Whereas 10G/sec (57710) requires
 946  *      PT in little endian format
 947  */
 948 static void setup_qp_page_tables(struct bnx2i_endpoint *ep)
 949 {
 950         int num_pages;
 951         u32 *ptbl;
 952         dma_addr_t page;
 953         int cnic_dev_10g;
 954
 955         if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
 956                 cnic_dev_10g = 1;
 957         else
 958                 cnic_dev_10g = 0;
 959
 960         /* SQ page table */
 961         memset(ep->qp.sq_pgtbl_virt, 0, ep->qp.sq_pgtbl_size);
 962         num_pages = ep->qp.sq_mem_size / PAGE_SIZE;
 963         page = ep->qp.sq_phys;
 964
 965         if (cnic_dev_10g)
 966                 ptbl = (u32 *)((u8 *)ep->qp.sq_pgtbl_virt + ISCSI_SQ_DB_SIZE);
 967         else
 968                 ptbl = (u32 *) ep->qp.sq_pgtbl_virt;
 969         while (num_pages--) {
 970                 if (cnic_dev_10g) {
 971                         /* PTE is written in little endian format for 57710 */
 972                         *ptbl = (u32) page;
 973                         ptbl++;
 974                         *ptbl = (u32) ((u64) page >> 32);
 975                         ptbl++;
 976                         page += PAGE_SIZE;
 977                 } else {
 978                         /* PTE is written in big endian format for
 979                          * 5706/5708/5709 devices */
 980                         *ptbl = (u32) ((u64) page >> 32);
 981                         ptbl++;
 982                         *ptbl = (u32) page;
 983                         ptbl++;
 984                         page += PAGE_SIZE;
 985                 }
 986         }
 987
 988         /* RQ page table */
 989         memset(ep->qp.rq_pgtbl_virt, 0, ep->qp.rq_pgtbl_size);
 990         num_pages = ep->qp.rq_mem_size / PAGE_SIZE;
 991         page = ep->qp.rq_phys;
 992
 993         if (cnic_dev_10g)
 994                 ptbl = (u32 *)((u8 *)ep->qp.rq_pgtbl_virt + ISCSI_RQ_DB_SIZE);
 995         else
 996                 ptbl = (u32 *) ep->qp.rq_pgtbl_virt;
 997         while (num_pages--) {
 998                 if (cnic_dev_10g) {
 999                         /* PTE is written in little endian format for 57710 */
1000                         *ptbl = (u32) page;
1001                         ptbl++;
1002                         *ptbl = (u32) ((u64) page >> 32);
1003                         ptbl++;
1004                         page += PAGE_SIZE;
1005                 } else {
1006                         /* PTE is written in big endian format for
1007                          * 5706/5708/5709 devices */
1008                         *ptbl = (u32) ((u64) page >> 32);
1009                         ptbl++;
1010                         *ptbl = (u32) page;
1011                         ptbl++;
1012                         page += PAGE_SIZE;
1013                 }
1014         }
1015
1016         /* CQ page table */
1017         memset(ep->qp.cq_pgtbl_virt, 0, ep->qp.cq_pgtbl_size);
1018         num_pages = ep->qp.cq_mem_size / PAGE_SIZE;
1019         page = ep->qp.cq_phys;
1020
1021         if (cnic_dev_10g)
1022                 ptbl = (u32 *)((u8 *)ep->qp.cq_pgtbl_virt + ISCSI_CQ_DB_SIZE);
1023         else
1024                 ptbl = (u32 *) ep->qp.cq_pgtbl_virt;
1025         while (num_pages--) {
1026                 if (cnic_dev_10g) {
1027                         /* PTE is written in little endian format for 57710 */
1028                         *ptbl = (u32) page;
1029                         ptbl++;
1030                         *ptbl = (u32) ((u64) page >> 32);
1031                         ptbl++;
1032                         page += PAGE_SIZE;
1033                 } else {
1034                         /* PTE is written in big endian format for
1035                          * 5706/5708/5709 devices */
1036                         *ptbl = (u32) ((u64) page >> 32);
1037                         ptbl++;
1038                         *ptbl = (u32) page;
1039                         ptbl++;
1040                         page += PAGE_SIZE;
1041                 }
1042         }
1043 }
1044
1045
1046 /**
1047  * bnx2i_alloc_qp_resc - allocates required resources for QP.
1048  * @hba:        adapter structure pointer
1049  * @ep:         endpoint (transport indentifier) structure
1050  *
1051  * Allocate QP (transport layer for iSCSI connection) resources, DMA'able
1052  *      memory for SQ/RQ/CQ and page tables. EP structure elements such
1053  *      as producer/consumer indexes/pointers, queue sizes and page table
1054  *      contents are setup
1055  */
1056 int bnx2i_alloc_qp_resc(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
1057 {
1058         struct bnx2i_5771x_cq_db *cq_db;
1059
1060         ep->hba = hba;
1061         ep->conn = NULL;
1062         ep->ep_cid = ep->ep_iscsi_cid = ep->ep_pg_cid = 0;
1063
1064         /* Allocate page table memory for SQ which is page aligned */
1065         ep->qp.sq_mem_size = hba->max_sqes * BNX2I_SQ_WQE_SIZE;
1066         ep->qp.sq_mem_size =
1067                 (ep->qp.sq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
1068         ep->qp.sq_pgtbl_size =
1069                 (ep->qp.sq_mem_size / PAGE_SIZE) * sizeof(void *);
1070         ep->qp.sq_pgtbl_size =
1071                 (ep->qp.sq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
1072
1073         ep->qp.sq_pgtbl_virt =
1074                 dma_alloc_coherent(&hba->pcidev->dev, ep->qp.sq_pgtbl_size,
1075                                    &ep->qp.sq_pgtbl_phys, GFP_KERNEL);
1076         if (!ep->qp.sq_pgtbl_virt) {
1077                 printk(KERN_ALERT "bnx2i: unable to alloc SQ PT mem (%d)\n",
1078                                   ep->qp.sq_pgtbl_size);
1079                 goto mem_alloc_err;
1080         }
1081
1082         /* Allocate memory area for actual SQ element */
1083         ep->qp.sq_virt =
1084                 dma_alloc_coherent(&hba->pcidev->dev, ep->qp.sq_mem_size,
1085                                    &ep->qp.sq_phys, GFP_KERNEL);
1086         if (!ep->qp.sq_virt) {
1087                 printk(KERN_ALERT "bnx2i: unable to alloc SQ BD memory %d\n",
1088                                   ep->qp.sq_mem_size);
1089                 goto mem_alloc_err;
1090         }
1091
1092         memset(ep->qp.sq_virt, 0x00, ep->qp.sq_mem_size);
1093         ep->qp.sq_first_qe = ep->qp.sq_virt;
1094         ep->qp.sq_prod_qe = ep->qp.sq_first_qe;
1095         ep->qp.sq_cons_qe = ep->qp.sq_first_qe;
1096         ep->qp.sq_last_qe = &ep->qp.sq_first_qe[hba->max_sqes - 1];
1097         ep->qp.sq_prod_idx = 0;
1098         ep->qp.sq_cons_idx = 0;
1099         ep->qp.sqe_left = hba->max_sqes;
1100
1101         /* Allocate page table memory for CQ which is page aligned */
1102         ep->qp.cq_mem_size = hba->max_cqes * BNX2I_CQE_SIZE;
1103         ep->qp.cq_mem_size =
1104                 (ep->qp.cq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
1105         ep->qp.cq_pgtbl_size =
1106                 (ep->qp.cq_mem_size / PAGE_SIZE) * sizeof(void *);
1107         ep->qp.cq_pgtbl_size =
1108                 (ep->qp.cq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
1109
1110         ep->qp.cq_pgtbl_virt =
1111                 dma_alloc_coherent(&hba->pcidev->dev, ep->qp.cq_pgtbl_size,
1112                                    &ep->qp.cq_pgtbl_phys, GFP_KERNEL);
1113         if (!ep->qp.cq_pgtbl_virt) {
1114                 printk(KERN_ALERT "bnx2i: unable to alloc CQ PT memory %d\n",
1115                                   ep->qp.cq_pgtbl_size);
1116                 goto mem_alloc_err;
1117         }
1118
1119         /* Allocate memory area for actual CQ element */
1120         ep->qp.cq_virt =
1121                 dma_alloc_coherent(&hba->pcidev->dev, ep->qp.cq_mem_size,
1122                                    &ep->qp.cq_phys, GFP_KERNEL);
1123         if (!ep->qp.cq_virt) {
1124                 printk(KERN_ALERT "bnx2i: unable to alloc CQ BD memory %d\n",
1125                                   ep->qp.cq_mem_size);
1126                 goto mem_alloc_err;
1127         }
1128         memset(ep->qp.cq_virt, 0x00, ep->qp.cq_mem_size);
1129
1130         ep->qp.cq_first_qe = ep->qp.cq_virt;
1131         ep->qp.cq_prod_qe = ep->qp.cq_first_qe;
1132         ep->qp.cq_cons_qe = ep->qp.cq_first_qe;
1133         ep->qp.cq_last_qe = &ep->qp.cq_first_qe[hba->max_cqes - 1];
1134         ep->qp.cq_prod_idx = 0;
1135         ep->qp.cq_cons_idx = 0;
1136         ep->qp.cqe_left = hba->max_cqes;
1137         ep->qp.cqe_exp_seq_sn = ISCSI_INITIAL_SN;
1138         ep->qp.cqe_size = hba->max_cqes;
1139
1140         /* Invalidate all EQ CQE index, req only for 57710 */
1141         cq_db = (struct bnx2i_5771x_cq_db *) ep->qp.cq_pgtbl_virt;
1142         memset(cq_db->sqn, 0xFF, sizeof(cq_db->sqn[0]) * BNX2X_MAX_CQS);
1143
1144         /* Allocate page table memory for RQ which is page aligned */
1145         ep->qp.rq_mem_size = hba->max_rqes * BNX2I_RQ_WQE_SIZE;
1146         ep->qp.rq_mem_size =
1147                 (ep->qp.rq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
1148         ep->qp.rq_pgtbl_size =
1149                 (ep->qp.rq_mem_size / PAGE_SIZE) * sizeof(void *);
1150         ep->qp.rq_pgtbl_size =
1151                 (ep->qp.rq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
1152
1153         ep->qp.rq_pgtbl_virt =
1154                 dma_alloc_coherent(&hba->pcidev->dev, ep->qp.rq_pgtbl_size,
1155                                    &ep->qp.rq_pgtbl_phys, GFP_KERNEL);
1156         if (!ep->qp.rq_pgtbl_virt) {
1157                 printk(KERN_ALERT "bnx2i: unable to alloc RQ PT mem %d\n",
1158                                   ep->qp.rq_pgtbl_size);
1159                 goto mem_alloc_err;
1160         }
1161
1162         /* Allocate memory area for actual RQ element */
1163         ep->qp.rq_virt =
1164                 dma_alloc_coherent(&hba->pcidev->dev, ep->qp.rq_mem_size,
1165                                    &ep->qp.rq_phys, GFP_KERNEL);
1166         if (!ep->qp.rq_virt) {
1167                 printk(KERN_ALERT "bnx2i: unable to alloc RQ BD memory %d\n",
1168                                   ep->qp.rq_mem_size);
1169                 goto mem_alloc_err;
1170         }
1171
1172         ep->qp.rq_first_qe = ep->qp.rq_virt;
1173         ep->qp.rq_prod_qe = ep->qp.rq_first_qe;
1174         ep->qp.rq_cons_qe = ep->qp.rq_first_qe;
1175         ep->qp.rq_last_qe = &ep->qp.rq_first_qe[hba->max_rqes - 1];
1176         ep->qp.rq_prod_idx = 0x8000;
1177         ep->qp.rq_cons_idx = 0;
1178         ep->qp.rqe_left = hba->max_rqes;
1179
1180         setup_qp_page_tables(ep);
1181
1182         return 0;
1183
1184 mem_alloc_err:
1185         bnx2i_free_qp_resc(hba, ep);
1186         return -ENOMEM;
1187 }
1188
1189
1190
1191 /**
1192  * bnx2i_free_qp_resc - free memory resources held by QP
1193  * @hba:        adapter structure pointer
1194  * @ep: endpoint (transport indentifier) structure
1195  *
1196  * Free QP resources - SQ/RQ/CQ memory and page tables.
1197  */
1198 void bnx2i_free_qp_resc(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
1199 {
1200         if (ep->qp.ctx_base) {
1201                 iounmap(ep->qp.ctx_base);
1202                 ep->qp.ctx_base = NULL;
1203         }
1204         /* Free SQ mem */
1205         if (ep->qp.sq_pgtbl_virt) {
1206                 dma_free_coherent(&hba->pcidev->dev, ep->qp.sq_pgtbl_size,
1207                                   ep->qp.sq_pgtbl_virt, ep->qp.sq_pgtbl_phys);
1208                 ep->qp.sq_pgtbl_virt = NULL;
1209                 ep->qp.sq_pgtbl_phys = 0;
1210         }
1211         if (ep->qp.sq_virt) {
1212                 dma_free_coherent(&hba->pcidev->dev, ep->qp.sq_mem_size,
1213                                   ep->qp.sq_virt, ep->qp.sq_phys);
1214                 ep->qp.sq_virt = NULL;
1215                 ep->qp.sq_phys = 0;
1216         }
1217
1218         /* Free RQ mem */
1219         if (ep->qp.rq_pgtbl_virt) {
1220                 dma_free_coherent(&hba->pcidev->dev, ep->qp.rq_pgtbl_size,
1221                                   ep->qp.rq_pgtbl_virt, ep->qp.rq_pgtbl_phys);
1222                 ep->qp.rq_pgtbl_virt = NULL;
1223                 ep->qp.rq_pgtbl_phys = 0;
1224         }
1225         if (ep->qp.rq_virt) {
1226                 dma_free_coherent(&hba->pcidev->dev, ep->qp.rq_mem_size,
1227                                   ep->qp.rq_virt, ep->qp.rq_phys);
1228                 ep->qp.rq_virt = NULL;
1229                 ep->qp.rq_phys = 0;
1230         }
1231
1232         /* Free CQ mem */
1233         if (ep->qp.cq_pgtbl_virt) {
1234                 dma_free_coherent(&hba->pcidev->dev, ep->qp.cq_pgtbl_size,
1235                                   ep->qp.cq_pgtbl_virt, ep->qp.cq_pgtbl_phys);
1236                 ep->qp.cq_pgtbl_virt = NULL;
1237                 ep->qp.cq_pgtbl_phys = 0;
1238         }
1239         if (ep->qp.cq_virt) {
1240                 dma_free_coherent(&hba->pcidev->dev, ep->qp.cq_mem_size,
1241                                   ep->qp.cq_virt, ep->qp.cq_phys);
1242                 ep->qp.cq_virt = NULL;
1243                 ep->qp.cq_phys = 0;
1244         }
1245 }
1246
1247
1248 /**
1249  * bnx2i_send_fw_iscsi_init_msg - initiates initial handshake with iscsi f/w
1250  * @hba:        adapter structure pointer
1251  *
1252  * Send down iscsi_init KWQEs which initiates the initial handshake with the f/w
1253  *      This results in iSCSi support validation and on-chip context manager
1254  *      initialization.  Firmware completes this handshake with a CQE carrying
1255  *      the result of iscsi support validation. Parameter carried by
1256  *      iscsi init request determines the number of offloaded connection and
1257  *      tolerance level for iscsi protocol violation this hba/chip can support
1258  */
1259 int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba)
1260 {
1261         struct kwqe *kwqe_arr[3];
1262         struct iscsi_kwqe_init1 iscsi_init;
1263         struct iscsi_kwqe_init2 iscsi_init2;
1264         int rc = 0;
1265         u64 mask64;
1266
1267         bnx2i_adjust_qp_size(hba);
1268
1269         iscsi_init.flags =
1270                 ISCSI_PAGE_SIZE_4K << ISCSI_KWQE_INIT1_PAGE_SIZE_SHIFT;
1271         if (en_tcp_dack)
1272                 iscsi_init.flags |= ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE;
1273         iscsi_init.reserved0 = 0;
1274         iscsi_init.num_cqs = 1;
1275         iscsi_init.hdr.op_code = ISCSI_KWQE_OPCODE_INIT1;
1276         iscsi_init.hdr.flags =
1277                 (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
1278
1279         iscsi_init.dummy_buffer_addr_lo = (u32) hba->dummy_buf_dma;
1280         iscsi_init.dummy_buffer_addr_hi =
1281                 (u32) ((u64) hba->dummy_buf_dma >> 32);
1282
1283         hba->num_ccell = hba->max_sqes >> 1;
1284         hba->ctx_ccell_tasks =
1285                         ((hba->num_ccell & 0xFFFF) | (hba->max_sqes << 16));
1286         iscsi_init.num_ccells_per_conn = hba->num_ccell;
1287         iscsi_init.num_tasks_per_conn = hba->max_sqes;
1288         iscsi_init.sq_wqes_per_page = PAGE_SIZE / BNX2I_SQ_WQE_SIZE;
1289         iscsi_init.sq_num_wqes = hba->max_sqes;
1290         iscsi_init.cq_log_wqes_per_page =
1291                 (u8) bnx2i_power_of2(PAGE_SIZE / BNX2I_CQE_SIZE);
1292         iscsi_init.cq_num_wqes = hba->max_cqes;
1293         iscsi_init.cq_num_pages = (hba->max_cqes * BNX2I_CQE_SIZE +
1294                                    (PAGE_SIZE - 1)) / PAGE_SIZE;
1295         iscsi_init.sq_num_pages = (hba->max_sqes * BNX2I_SQ_WQE_SIZE +
1296                                    (PAGE_SIZE - 1)) / PAGE_SIZE;
1297         iscsi_init.rq_buffer_size = BNX2I_RQ_WQE_SIZE;
1298         iscsi_init.rq_num_wqes = hba->max_rqes;
1299
1300
1301         iscsi_init2.hdr.op_code = ISCSI_KWQE_OPCODE_INIT2;
1302         iscsi_init2.hdr.flags =
1303                 (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
1304         iscsi_init2.max_cq_sqn = hba->max_cqes * 2 + 1;
1305         mask64 = 0x0ULL;
1306         mask64 |= (
1307                 /* CISCO MDS */
1308                 (1UL <<
1309                   ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV) |
1310                 /* HP MSA1510i */
1311                 (1UL <<
1312                   ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN) |
1313                 /* EMC */
1314                 (1ULL << ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN));
1315         if (error_mask1) {
1316                 iscsi_init2.error_bit_map[0] = error_mask1;
1317                 mask64 &= (u32)(~mask64);
1318                 mask64 |= error_mask1;
1319         } else
1320                 iscsi_init2.error_bit_map[0] = (u32) mask64;
1321
1322         if (error_mask2) {
1323                 iscsi_init2.error_bit_map[1] = error_mask2;
1324                 mask64 &= 0xffffffff;
1325                 mask64 |= ((u64)error_mask2 << 32);
1326         } else
1327                 iscsi_init2.error_bit_map[1] = (u32) (mask64 >> 32);
1328
1329         iscsi_error_mask = mask64;
1330
1331         kwqe_arr[0] = (struct kwqe *) &iscsi_init;
1332         kwqe_arr[1] = (struct kwqe *) &iscsi_init2;
1333
1334         if (hba->cnic && hba->cnic->submit_kwqes)
1335                 rc = hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 2);
1336         return rc;
1337 }
1338
1339
1340 /**
1341  * bnx2i_process_scsi_cmd_resp - this function handles scsi cmd completion.
1342  * @session:    iscsi session
1343  * @bnx2i_conn: bnx2i connection
1344  * @cqe:        pointer to newly DMA'ed CQE entry for processing
1345  *
1346  * process SCSI CMD Response CQE & complete the request to SCSI-ML
1347  */
1348 int bnx2i_process_scsi_cmd_resp(struct iscsi_session *session,
1349                                 struct bnx2i_conn *bnx2i_conn,
1350                                 struct cqe *cqe)
1351 {
1352         struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
1353         struct bnx2i_hba *hba = bnx2i_conn->hba;
1354         struct bnx2i_cmd_response *resp_cqe;
1355         struct bnx2i_cmd *bnx2i_cmd;
1356         struct iscsi_task *task;
1357         struct iscsi_scsi_rsp *hdr;
1358         u32 datalen = 0;
1359
1360         resp_cqe = (struct bnx2i_cmd_response *)cqe;
1361         spin_lock_bh(&session->lock);
1362         task = iscsi_itt_to_task(conn,
1363                                  resp_cqe->itt & ISCSI_CMD_RESPONSE_INDEX);
1364         if (!task)
1365                 goto fail;
1366
1367         bnx2i_cmd = task->dd_data;
1368
1369         if (bnx2i_cmd->req.op_attr & ISCSI_CMD_REQUEST_READ) {
1370                 conn->datain_pdus_cnt +=
1371                         resp_cqe->task_stat.read_stat.num_data_ins;
1372                 conn->rxdata_octets +=
1373                         bnx2i_cmd->req.total_data_transfer_length;
1374                 ADD_STATS_64(hba, rx_pdus,
1375                              resp_cqe->task_stat.read_stat.num_data_ins);
1376                 ADD_STATS_64(hba, rx_bytes,
1377                              bnx2i_cmd->req.total_data_transfer_length);
1378         } else {
1379                 conn->dataout_pdus_cnt +=
1380                         resp_cqe->task_stat.write_stat.num_data_outs;
1381                 conn->r2t_pdus_cnt +=
1382                         resp_cqe->task_stat.write_stat.num_r2ts;
1383                 conn->txdata_octets +=
1384                         bnx2i_cmd->req.total_data_transfer_length;
1385                 ADD_STATS_64(hba, tx_pdus,
1386                              resp_cqe->task_stat.write_stat.num_data_outs);
1387                 ADD_STATS_64(hba, tx_bytes,
1388                              bnx2i_cmd->req.total_data_transfer_length);
1389                 ADD_STATS_64(hba, rx_pdus,
1390                              resp_cqe->task_stat.write_stat.num_r2ts);
1391         }
1392         bnx2i_iscsi_unmap_sg_list(bnx2i_cmd);
1393
1394         hdr = (struct iscsi_scsi_rsp *)task->hdr;
1395         resp_cqe = (struct bnx2i_cmd_response *)cqe;
1396         hdr->opcode = resp_cqe->op_code;
1397         hdr->max_cmdsn = cpu_to_be32(resp_cqe->max_cmd_sn);
1398         hdr->exp_cmdsn = cpu_to_be32(resp_cqe->exp_cmd_sn);
1399         hdr->response = resp_cqe->response;
1400         hdr->cmd_status = resp_cqe->status;
1401         hdr->flags = resp_cqe->response_flags;
1402         hdr->residual_count = cpu_to_be32(resp_cqe->residual_count);
1403
1404         if (resp_cqe->op_code == ISCSI_OP_SCSI_DATA_IN)
1405                 goto done;
1406
1407         if (resp_cqe->status == SAM_STAT_CHECK_CONDITION) {
1408                 datalen = resp_cqe->data_length;
1409                 if (datalen < 2)
1410                         goto done;
1411
1412                 if (datalen > BNX2I_RQ_WQE_SIZE) {
1413                         iscsi_conn_printk(KERN_ERR, conn,
1414                                           "sense data len %d > RQ sz\n",
1415                                           datalen);
1416                         datalen = BNX2I_RQ_WQE_SIZE;
1417                 } else if (datalen > ISCSI_DEF_MAX_RECV_SEG_LEN) {
1418                         iscsi_conn_printk(KERN_ERR, conn,
1419                                           "sense data len %d > conn data\n",
1420                                           datalen);
1421                         datalen = ISCSI_DEF_MAX_RECV_SEG_LEN;
1422                 }
1423
1424                 bnx2i_get_rq_buf(bnx2i_cmd->conn, conn->data, datalen);
1425                 bnx2i_put_rq_buf(bnx2i_cmd->conn, 1);
1426         }
1427
1428 done:
1429         __iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr,
1430                              conn->data, datalen);
1431 fail:
1432         spin_unlock_bh(&session->lock);
1433         return 0;
1434 }
1435
1436
1437 /**
1438  * bnx2i_process_login_resp - this function handles iscsi login response
1439  * @session:            iscsi session pointer
1440  * @bnx2i_conn:         iscsi connection pointer
1441  * @cqe:                pointer to newly DMA'ed CQE entry for processing
1442  *
1443  * process Login Response CQE & complete it to open-iscsi user daemon
1444  */
1445 static int bnx2i_process_login_resp(struct iscsi_session *session,
1446                                     struct bnx2i_conn *bnx2i_conn,
1447                                     struct cqe *cqe)
1448 {
1449         struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
1450         struct iscsi_task *task;
1451         struct bnx2i_login_response *login;
1452         struct iscsi_login_rsp *resp_hdr;
1453         int pld_len;
1454         int pad_len;
1455
1456         login = (struct bnx2i_login_response *) cqe;
1457         spin_lock(&session->lock);
1458         task = iscsi_itt_to_task(conn,
1459                                  login->itt & ISCSI_LOGIN_RESPONSE_INDEX);
1460         if (!task)
1461                 goto done;
1462
1463         resp_hdr = (struct iscsi_login_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
1464         memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
1465         resp_hdr->opcode = login->op_code;
1466         resp_hdr->flags = login->response_flags;
1467         resp_hdr->max_version = login->version_max;
1468         resp_hdr->active_version = login->version_active;
1469         resp_hdr->hlength = 0;
1470
1471         hton24(resp_hdr->dlength, login->data_length);
1472         memcpy(resp_hdr->isid, &login->isid_lo, 6);
1473         resp_hdr->tsih = cpu_to_be16(login->tsih);
1474         resp_hdr->itt = task->hdr->itt;
1475         resp_hdr->statsn = cpu_to_be32(login->stat_sn);
1476         resp_hdr->exp_cmdsn = cpu_to_be32(login->exp_cmd_sn);
1477         resp_hdr->max_cmdsn = cpu_to_be32(login->max_cmd_sn);
1478         resp_hdr->status_class = login->status_class;
1479         resp_hdr->status_detail = login->status_detail;
1480         pld_len = login->data_length;
1481         bnx2i_conn->gen_pdu.resp_wr_ptr =
1482                                         bnx2i_conn->gen_pdu.resp_buf + pld_len;
1483
1484         pad_len = 0;
1485         if (pld_len & 0x3)
1486                 pad_len = 4 - (pld_len % 4);
1487
1488         if (pad_len) {
1489                 int i = 0;
1490                 for (i = 0; i < pad_len; i++) {
1491                         bnx2i_conn->gen_pdu.resp_wr_ptr[0] = 0;
1492                         bnx2i_conn->gen_pdu.resp_wr_ptr++;
1493                 }
1494         }
1495
1496         __iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr,
1497                 bnx2i_conn->gen_pdu.resp_buf,
1498                 bnx2i_conn->gen_pdu.resp_wr_ptr - bnx2i_conn->gen_pdu.resp_buf);
1499 done:
1500         spin_unlock(&session->lock);
1501         return 0;
1502 }
1503
1504
1505 /**
1506  * bnx2i_process_text_resp - this function handles iscsi text response
1507  * @session:    iscsi session pointer
1508  * @bnx2i_conn: iscsi connection pointer
1509  * @cqe:        pointer to newly DMA'ed CQE entry for processing
1510  *
1511  * process iSCSI Text Response CQE&  complete it to open-iscsi user daemon
1512  */
1513 static int bnx2i_process_text_resp(struct iscsi_session *session,
1514                                    struct bnx2i_conn *bnx2i_conn,
1515                                    struct cqe *cqe)
1516 {
1517         struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
1518         struct iscsi_task *task;
1519         struct bnx2i_text_response *text;
1520         struct iscsi_text_rsp *resp_hdr;
1521         int pld_len;
1522         int pad_len;
1523
1524         text = (struct bnx2i_text_response *) cqe;
1525         spin_lock(&session->lock);
1526         task = iscsi_itt_to_task(conn, text->itt & ISCSI_LOGIN_RESPONSE_INDEX);
1527         if (!task)
1528                 goto done;
1529
1530         resp_hdr = (struct iscsi_text_rsp *)&bnx2i_conn->gen_pdu.resp_hdr;
1531         memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
1532         resp_hdr->opcode = text->op_code;
1533         resp_hdr->flags = text->response_flags;
1534         resp_hdr->hlength = 0;
1535
1536         hton24(resp_hdr->dlength, text->data_length);
1537         resp_hdr->itt = task->hdr->itt;
1538         resp_hdr->ttt = cpu_to_be32(text->ttt);
1539         resp_hdr->statsn = task->hdr->exp_statsn;
1540         resp_hdr->exp_cmdsn = cpu_to_be32(text->exp_cmd_sn);
1541         resp_hdr->max_cmdsn = cpu_to_be32(text->max_cmd_sn);
1542         pld_len = text->data_length;
1543         bnx2i_conn->gen_pdu.resp_wr_ptr = bnx2i_conn->gen_pdu.resp_buf +
1544                                           pld_len;
1545         pad_len = 0;
1546         if (pld_len & 0x3)
1547                 pad_len = 4 - (pld_len % 4);
1548
1549         if (pad_len) {
1550                 int i = 0;
1551                 for (i = 0; i < pad_len; i++) {
1552                         bnx2i_conn->gen_pdu.resp_wr_ptr[0] = 0;
1553                         bnx2i_conn->gen_pdu.resp_wr_ptr++;
1554                 }
1555         }
1556         __iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr,
1557                              bnx2i_conn->gen_pdu.resp_buf,
1558                              bnx2i_conn->gen_pdu.resp_wr_ptr -
1559                              bnx2i_conn->gen_pdu.resp_buf);
1560 done:
1561         spin_unlock(&session->lock);
1562         return 0;
1563 }
1564
1565
1566 /**
1567  * bnx2i_process_tmf_resp - this function handles iscsi TMF response
1568  * @session:            iscsi session pointer
1569  * @bnx2i_conn:         iscsi connection pointer
1570  * @cqe:                pointer to newly DMA'ed CQE entry for processing
1571  *
1572  * process iSCSI TMF Response CQE and wake up the driver eh thread.
1573  */
1574 static int bnx2i_process_tmf_resp(struct iscsi_session *session,
1575                                   struct bnx2i_conn *bnx2i_conn,
1576                                   struct cqe *cqe)
1577 {
1578         struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
1579         struct iscsi_task *task;
1580         struct bnx2i_tmf_response *tmf_cqe;
1581         struct iscsi_tm_rsp *resp_hdr;
1582
1583         tmf_cqe = (struct bnx2i_tmf_response *)cqe;
1584         spin_lock(&session->lock);
1585         task = iscsi_itt_to_task(conn,
1586                                  tmf_cqe->itt & ISCSI_TMF_RESPONSE_INDEX);
1587         if (!task)
1588                 goto done;
1589
1590         resp_hdr = (struct iscsi_tm_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
1591         memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
1592         resp_hdr->opcode = tmf_cqe->op_code;
1593         resp_hdr->max_cmdsn = cpu_to_be32(tmf_cqe->max_cmd_sn);
1594         resp_hdr->exp_cmdsn = cpu_to_be32(tmf_cqe->exp_cmd_sn);
1595         resp_hdr->itt = task->hdr->itt;
1596         resp_hdr->response = tmf_cqe->response;
1597
1598         __iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr, NULL, 0);
1599 done:
1600         spin_unlock(&session->lock);
1601         return 0;
1602 }
1603
1604 /**
1605  * bnx2i_process_logout_resp - this function handles iscsi logout response
1606  * @session:            iscsi session pointer
1607  * @bnx2i_conn:         iscsi connection pointer
1608  * @cqe:                pointer to newly DMA'ed CQE entry for processing
1609  *
1610  * process iSCSI Logout Response CQE & make function call to
1611  * notify the user daemon.
1612  */
1613 static int bnx2i_process_logout_resp(struct iscsi_session *session,
1614                                      struct bnx2i_conn *bnx2i_conn,
1615                                      struct cqe *cqe)
1616 {
1617         struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
1618         struct iscsi_task *task;
1619         struct bnx2i_logout_response *logout;
1620         struct iscsi_logout_rsp *resp_hdr;
1621
1622         logout = (struct bnx2i_logout_response *) cqe;
1623         spin_lock(&session->lock);
1624         task = iscsi_itt_to_task(conn,
1625                                  logout->itt & ISCSI_LOGOUT_RESPONSE_INDEX);
1626         if (!task)
1627                 goto done;
1628
1629         resp_hdr = (struct iscsi_logout_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
1630         memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
1631         resp_hdr->opcode = logout->op_code;
1632         resp_hdr->flags = logout->response;
1633         resp_hdr->hlength = 0;
1634
1635         resp_hdr->itt = task->hdr->itt;
1636         resp_hdr->statsn = task->hdr->exp_statsn;
1637         resp_hdr->exp_cmdsn = cpu_to_be32(logout->exp_cmd_sn);
1638         resp_hdr->max_cmdsn = cpu_to_be32(logout->max_cmd_sn);
1639
1640         resp_hdr->t2wait = cpu_to_be32(logout->time_to_wait);
1641         resp_hdr->t2retain = cpu_to_be32(logout->time_to_retain);
1642
1643         __iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr, NULL, 0);
1644
1645         bnx2i_conn->ep->state = EP_STATE_LOGOUT_RESP_RCVD;
1646 done:
1647         spin_unlock(&session->lock);
1648         return 0;
1649 }
1650
1651 /**
1652  * bnx2i_process_nopin_local_cmpl - this function handles iscsi nopin CQE
1653  * @session:            iscsi session pointer
1654  * @bnx2i_conn:         iscsi connection pointer
1655  * @cqe:                pointer to newly DMA'ed CQE entry for processing
1656  *
1657  * process iSCSI NOPIN local completion CQE, frees IIT and command structures
1658  */
1659 static void bnx2i_process_nopin_local_cmpl(struct iscsi_session *session,
1660                                            struct bnx2i_conn *bnx2i_conn,
1661                                            struct cqe *cqe)
1662 {
1663         struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
1664         struct bnx2i_nop_in_msg *nop_in;
1665         struct iscsi_task *task;
1666
1667         nop_in = (struct bnx2i_nop_in_msg *)cqe;
1668         spin_lock(&session->lock);
1669         task = iscsi_itt_to_task(conn,
1670                                  nop_in->itt & ISCSI_NOP_IN_MSG_INDEX);
1671         if (task)
1672                 __iscsi_put_task(task);
1673         spin_unlock(&session->lock);
1674 }
1675
1676 /**
1677  * bnx2i_unsol_pdu_adjust_rq - makes adjustments to RQ after unsol pdu is recvd
1678  * @conn:       iscsi connection
1679  *
1680  * Firmware advances RQ producer index for every unsolicited PDU even if
1681  *      payload data length is '0'. This function makes corresponding
1682  *      adjustments on the driver side to match this f/w behavior
1683  */
1684 static void bnx2i_unsol_pdu_adjust_rq(struct bnx2i_conn *bnx2i_conn)
1685 {
1686         char dummy_rq_data[2];
1687         bnx2i_get_rq_buf(bnx2i_conn, dummy_rq_data, 1);
1688         bnx2i_put_rq_buf(bnx2i_conn, 1);
1689 }
1690
1691
1692 /**
1693  * bnx2i_process_nopin_mesg - this function handles iscsi nopin CQE
1694  * @session:            iscsi session pointer
1695  * @bnx2i_conn:         iscsi connection pointer
1696  * @cqe:                pointer to newly DMA'ed CQE entry for processing
1697  *
1698  * process iSCSI target's proactive iSCSI NOPIN request
1699  */
1700 static int bnx2i_process_nopin_mesg(struct iscsi_session *session,
1701                                      struct bnx2i_conn *bnx2i_conn,
1702                                      struct cqe *cqe)
1703 {
1704         struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
1705         struct iscsi_task *task;
1706         struct bnx2i_nop_in_msg *nop_in;
1707         struct iscsi_nopin *hdr;
1708         int tgt_async_nop = 0;
1709
1710         nop_in = (struct bnx2i_nop_in_msg *)cqe;
1711
1712         spin_lock(&session->lock);
1713         hdr = (struct iscsi_nopin *)&bnx2i_conn->gen_pdu.resp_hdr;
1714         memset(hdr, 0, sizeof(struct iscsi_hdr));
1715         hdr->opcode = nop_in->op_code;
1716         hdr->max_cmdsn = cpu_to_be32(nop_in->max_cmd_sn);
1717         hdr->exp_cmdsn = cpu_to_be32(nop_in->exp_cmd_sn);
1718         hdr->ttt = cpu_to_be32(nop_in->ttt);
1719
1720         if (nop_in->itt == (u16) RESERVED_ITT) {
1721                 bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
1722                 hdr->itt = RESERVED_ITT;
1723                 tgt_async_nop = 1;
1724                 goto done;
1725         }
1726
1727         /* this is a response to one of our nop-outs */
1728         task = iscsi_itt_to_task(conn,
1729                          (itt_t) (nop_in->itt & ISCSI_NOP_IN_MSG_INDEX));
1730         if (task) {
1731                 hdr->flags = ISCSI_FLAG_CMD_FINAL;
1732                 hdr->itt = task->hdr->itt;
1733                 hdr->ttt = cpu_to_be32(nop_in->ttt);
1734                 memcpy(&hdr->lun, nop_in->lun, 8);
1735         }
1736 done:
1737         __iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
1738         spin_unlock(&session->lock);
1739
1740         return tgt_async_nop;
1741 }
1742
1743
1744 /**
1745  * bnx2i_process_async_mesg - this function handles iscsi async message
1746  * @session:            iscsi session pointer
1747  * @bnx2i_conn:         iscsi connection pointer
1748  * @cqe:                pointer to newly DMA'ed CQE entry for processing
1749  *
1750  * process iSCSI ASYNC Message
1751  */
1752 static void bnx2i_process_async_mesg(struct iscsi_session *session,
1753                                      struct bnx2i_conn *bnx2i_conn,
1754                                      struct cqe *cqe)
1755 {
1756         struct bnx2i_async_msg *async_cqe;
1757         struct iscsi_async *resp_hdr;
1758         u8 async_event;
1759
1760         bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
1761
1762         async_cqe = (struct bnx2i_async_msg *)cqe;
1763         async_event = async_cqe->async_event;
1764
1765         if (async_event == ISCSI_ASYNC_MSG_SCSI_EVENT) {
1766                 iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
1767                                   "async: scsi events not supported\n");
1768                 return;
1769         }
1770
1771         spin_lock(&session->lock);
1772         resp_hdr = (struct iscsi_async *) &bnx2i_conn->gen_pdu.resp_hdr;
1773         memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
1774         resp_hdr->opcode = async_cqe->op_code;
1775         resp_hdr->flags = 0x80;
1776
1777         memcpy(&resp_hdr->lun, async_cqe->lun, 8);
1778         resp_hdr->exp_cmdsn = cpu_to_be32(async_cqe->exp_cmd_sn);
1779         resp_hdr->max_cmdsn = cpu_to_be32(async_cqe->max_cmd_sn);
1780
1781         resp_hdr->async_event = async_cqe->async_event;
1782         resp_hdr->async_vcode = async_cqe->async_vcode;
1783
1784         resp_hdr->param1 = cpu_to_be16(async_cqe->param1);
1785         resp_hdr->param2 = cpu_to_be16(async_cqe->param2);
1786         resp_hdr->param3 = cpu_to_be16(async_cqe->param3);
1787
1788         __iscsi_complete_pdu(bnx2i_conn->cls_conn->dd_data,
1789                              (struct iscsi_hdr *)resp_hdr, NULL, 0);
1790         spin_unlock(&session->lock);
1791 }
1792
1793
1794 /**
1795  * bnx2i_process_reject_mesg - process iscsi reject pdu
1796  * @session:            iscsi session pointer
1797  * @bnx2i_conn:         iscsi connection pointer
1798  * @cqe:                pointer to newly DMA'ed CQE entry for processing
1799  *
1800  * process iSCSI REJECT message
1801  */
1802 static void bnx2i_process_reject_mesg(struct iscsi_session *session,
1803                                       struct bnx2i_conn *bnx2i_conn,
1804                                       struct cqe *cqe)
1805 {
1806         struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
1807         struct bnx2i_reject_msg *reject;
1808         struct iscsi_reject *hdr;
1809
1810         reject = (struct bnx2i_reject_msg *) cqe;
1811         if (reject->data_length) {
1812                 bnx2i_get_rq_buf(bnx2i_conn, conn->data, reject->data_length);
1813                 bnx2i_put_rq_buf(bnx2i_conn, 1);
1814         } else
1815                 bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
1816
1817         spin_lock(&session->lock);
1818         hdr = (struct iscsi_reject *) &bnx2i_conn->gen_pdu.resp_hdr;
1819         memset(hdr, 0, sizeof(struct iscsi_hdr));
1820         hdr->opcode = reject->op_code;
1821         hdr->reason = reject->reason;
1822         hton24(hdr->dlength, reject->data_length);
1823         hdr->max_cmdsn = cpu_to_be32(reject->max_cmd_sn);
1824         hdr->exp_cmdsn = cpu_to_be32(reject->exp_cmd_sn);
1825         hdr->ffffffff = cpu_to_be32(RESERVED_ITT);
1826         __iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, conn->data,
1827                              reject->data_length);
1828         spin_unlock(&session->lock);
1829 }
1830
1831 /**
1832  * bnx2i_process_cmd_cleanup_resp - process scsi command clean-up completion
1833  * @session:            iscsi session pointer
1834  * @bnx2i_conn:         iscsi connection pointer
1835  * @cqe:                pointer to newly DMA'ed CQE entry for processing
1836  *
1837  * process command cleanup response CQE during conn shutdown or error recovery
1838  */
1839 static void bnx2i_process_cmd_cleanup_resp(struct iscsi_session *session,
1840                                            struct bnx2i_conn *bnx2i_conn,
1841                                            struct cqe *cqe)
1842 {
1843         struct bnx2i_cleanup_response *cmd_clean_rsp;
1844         struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
1845         struct iscsi_task *task;
1846
1847         cmd_clean_rsp = (struct bnx2i_cleanup_response *)cqe;
1848         spin_lock(&session->lock);
1849         task = iscsi_itt_to_task(conn,
1850                         cmd_clean_rsp->itt & ISCSI_CLEANUP_RESPONSE_INDEX);
1851         if (!task)
1852                 printk(KERN_ALERT "bnx2i: cmd clean ITT %x not active\n",
1853                         cmd_clean_rsp->itt & ISCSI_CLEANUP_RESPONSE_INDEX);
1854         spin_unlock(&session->lock);
1855         complete(&bnx2i_conn->cmd_cleanup_cmpl);
1856 }
1857
1858
1859 /**
1860  * bnx2i_percpu_io_thread - thread per cpu for ios
1861  *
1862  * @arg:        ptr to bnx2i_percpu_info structure
1863  */
1864 int bnx2i_percpu_io_thread(void *arg)
1865 {
1866         struct bnx2i_percpu_s *p = arg;
1867         struct bnx2i_work *work, *tmp;
1868         LIST_HEAD(work_list);
1869
1870         set_user_nice(current, -20);
1871
1872         while (!kthread_should_stop()) {
1873                 spin_lock_bh(&p->p_work_lock);
1874                 while (!list_empty(&p->work_list)) {
1875                         list_splice_init(&p->work_list, &work_list);
1876                         spin_unlock_bh(&p->p_work_lock);
1877
1878                         list_for_each_entry_safe(work, tmp, &work_list, list) {
1879                                 list_del_init(&work->list);
1880                                 /* work allocated in the bh, freed here */
1881                                 bnx2i_process_scsi_cmd_resp(work->session,
1882                                                             work->bnx2i_conn,
1883                                                             &work->cqe);
1884                                 atomic_dec(&work->bnx2i_conn->work_cnt);
1885                                 kfree(work);
1886                         }
1887                         spin_lock_bh(&p->p_work_lock);
1888                 }
1889                 set_current_state(TASK_INTERRUPTIBLE);
1890                 spin_unlock_bh(&p->p_work_lock);
1891                 schedule();
1892         }
1893         __set_current_state(TASK_RUNNING);
1894
1895         return 0;
1896 }
1897
1898
1899 /**
1900  * bnx2i_queue_scsi_cmd_resp - queue cmd completion to the percpu thread
1901  * @bnx2i_conn:         bnx2i connection
1902  *
1903  * this function is called by generic KCQ handler to queue all pending cmd
1904  * completion CQEs
1905  *
1906  * The implementation is to queue the cmd response based on the
1907  * last recorded command for the given connection.  The
1908  * cpu_id gets recorded upon task_xmit.  No out-of-order completion!
1909  */
1910 static int bnx2i_queue_scsi_cmd_resp(struct iscsi_session *session,
1911                                      struct bnx2i_conn *bnx2i_conn,
1912                                      struct bnx2i_nop_in_msg *cqe)
1913 {
1914         struct bnx2i_work *bnx2i_work = NULL;
1915         struct bnx2i_percpu_s *p = NULL;
1916         struct iscsi_task *task;
1917         struct scsi_cmnd *sc;
1918         int rc = 0;
1919         int cpu;
1920
1921         spin_lock(&session->lock);
1922         task = iscsi_itt_to_task(bnx2i_conn->cls_conn->dd_data,
1923                                  cqe->itt & ISCSI_CMD_RESPONSE_INDEX);
1924         if (!task || !task->sc) {
1925                 spin_unlock(&session->lock);
1926                 return -EINVAL;
1927         }
1928         sc = task->sc;
1929
1930         if (!blk_rq_cpu_valid(sc->request))
1931                 cpu = smp_processor_id();
1932         else
1933                 cpu = sc->request->cpu;
1934
1935         spin_unlock(&session->lock);
1936
1937         p = &per_cpu(bnx2i_percpu, cpu);
1938         spin_lock(&p->p_work_lock);
1939         if (unlikely(!p->iothread)) {
1940                 rc = -EINVAL;
1941                 goto err;
1942         }
1943         /* Alloc and copy to the cqe */
1944         bnx2i_work = kzalloc(sizeof(struct bnx2i_work), GFP_ATOMIC);
1945         if (bnx2i_work) {
1946                 INIT_LIST_HEAD(&bnx2i_work->list);
1947                 bnx2i_work->session = session;
1948                 bnx2i_work->bnx2i_conn = bnx2i_conn;
1949                 memcpy(&bnx2i_work->cqe, cqe, sizeof(struct cqe));
1950                 list_add_tail(&bnx2i_work->list, &p->work_list);
1951                 atomic_inc(&bnx2i_conn->work_cnt);
1952                 wake_up_process(p->iothread);
1953                 spin_unlock(&p->p_work_lock);
1954                 goto done;
1955         } else
1956                 rc = -ENOMEM;
1957 err:
1958         spin_unlock(&p->p_work_lock);
1959         bnx2i_process_scsi_cmd_resp(session, bnx2i_conn, (struct cqe *)cqe);
1960 done:
1961         return rc;
1962 }
1963
1964
1965 /**
1966  * bnx2i_process_new_cqes - process newly DMA'ed CQE's
1967  * @bnx2i_conn:         bnx2i connection
1968  *
1969  * this function is called by generic KCQ handler to process all pending CQE's
1970  */
1971 static int bnx2i_process_new_cqes(struct bnx2i_conn *bnx2i_conn)
1972 {
1973         struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
1974         struct iscsi_session *session = conn->session;
1975         struct bnx2i_hba *hba = bnx2i_conn->hba;
1976         struct qp_info *qp;
1977         struct bnx2i_nop_in_msg *nopin;
1978         int tgt_async_msg;
1979         int cqe_cnt = 0;
1980
1981         if (bnx2i_conn->ep == NULL)
1982                 return 0;
1983
1984         qp = &bnx2i_conn->ep->qp;
1985
1986         if (!qp->cq_virt) {
1987                 printk(KERN_ALERT "bnx2i (%s): cq resr freed in bh execution!",
1988                        hba->netdev->name);
1989                 goto out;
1990         }
1991         while (1) {
1992                 nopin = (struct bnx2i_nop_in_msg *) qp->cq_cons_qe;
1993                 if (nopin->cq_req_sn != qp->cqe_exp_seq_sn)
1994                         break;
1995
1996                 if (unlikely(test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx))) {
1997                         if (nopin->op_code == ISCSI_OP_NOOP_IN &&
1998                             nopin->itt == (u16) RESERVED_ITT) {
1999                                 printk(KERN_ALERT "bnx2i: Unsolicited "
2000                                        "NOP-In detected for suspended "
2001                                        "connection dev=%s!\n",
2002                                        hba->netdev->name);
2003                                 bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
2004                                 goto cqe_out;
2005                         }
2006                         break;
2007                 }
2008                 tgt_async_msg = 0;
2009
2010                 switch (nopin->op_code) {
2011                 case ISCSI_OP_SCSI_CMD_RSP:
2012                 case ISCSI_OP_SCSI_DATA_IN:
2013                         /* Run the kthread engine only for data cmds
2014                            All other cmds will be completed in this bh! */
2015                         bnx2i_queue_scsi_cmd_resp(session, bnx2i_conn, nopin);
2016                         goto done;
2017                 case ISCSI_OP_LOGIN_RSP:
2018                         bnx2i_process_login_resp(session, bnx2i_conn,
2019                                                  qp->cq_cons_qe);
2020                         break;
2021                 case ISCSI_OP_SCSI_TMFUNC_RSP:
2022                         bnx2i_process_tmf_resp(session, bnx2i_conn,
2023                                                qp->cq_cons_qe);
2024                         break;
2025                 case ISCSI_OP_TEXT_RSP:
2026                         bnx2i_process_text_resp(session, bnx2i_conn,
2027                                                 qp->cq_cons_qe);
2028                         break;
2029                 case ISCSI_OP_LOGOUT_RSP:
2030                         bnx2i_process_logout_resp(session, bnx2i_conn,
2031                                                   qp->cq_cons_qe);
2032                         break;
2033                 case ISCSI_OP_NOOP_IN:
2034                         if (bnx2i_process_nopin_mesg(session, bnx2i_conn,
2035                                                      qp->cq_cons_qe))
2036                                 tgt_async_msg = 1;
2037                         break;
2038                 case ISCSI_OPCODE_NOPOUT_LOCAL_COMPLETION:
2039                         bnx2i_process_nopin_local_cmpl(session, bnx2i_conn,
2040                                                        qp->cq_cons_qe);
2041                         break;
2042                 case ISCSI_OP_ASYNC_EVENT:
2043                         bnx2i_process_async_mesg(session, bnx2i_conn,
2044                                                  qp->cq_cons_qe);
2045                         tgt_async_msg = 1;
2046                         break;
2047                 case ISCSI_OP_REJECT:
2048                         bnx2i_process_reject_mesg(session, bnx2i_conn,
2049                                                   qp->cq_cons_qe);
2050                         break;
2051                 case ISCSI_OPCODE_CLEANUP_RESPONSE:
2052                         bnx2i_process_cmd_cleanup_resp(session, bnx2i_conn,
2053                                                        qp->cq_cons_qe);
2054                         break;
2055                 default:
2056                         printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n",
2057                                           nopin->op_code);
2058                 }
2059
2060                 ADD_STATS_64(hba, rx_pdus, 1);
2061                 ADD_STATS_64(hba, rx_bytes, nopin->data_length);
2062 done:
2063                 if (!tgt_async_msg) {
2064                         if (!atomic_read(&bnx2i_conn->ep->num_active_cmds))
2065                                 printk(KERN_ALERT "bnx2i (%s): no active cmd! "
2066                                        "op 0x%x\n",
2067                                        hba->netdev->name,
2068                                        nopin->op_code);
2069                         else
2070                                 atomic_dec(&bnx2i_conn->ep->num_active_cmds);
2071                 }
2072 cqe_out:
2073                 /* clear out in production version only, till beta keep opcode
2074                  * field intact, will be helpful in debugging (context dump)
2075                  * nopin->op_code = 0;
2076                  */
2077                 cqe_cnt++;
2078                 qp->cqe_exp_seq_sn++;
2079                 if (qp->cqe_exp_seq_sn == (qp->cqe_size * 2 + 1))
2080                         qp->cqe_exp_seq_sn = ISCSI_INITIAL_SN;
2081
2082                 if (qp->cq_cons_qe == qp->cq_last_qe) {
2083                         qp->cq_cons_qe = qp->cq_first_qe;
2084                         qp->cq_cons_idx = 0;
2085                 } else {
2086                         qp->cq_cons_qe++;
2087                         qp->cq_cons_idx++;
2088                 }
2089         }
2090 out:
2091         return cqe_cnt;
2092 }
2093
2094 /**
2095  * bnx2i_fastpath_notification - process global event queue (KCQ)
2096  * @hba:                adapter structure pointer
2097  * @new_cqe_kcqe:       pointer to newly DMA'ed KCQE entry
2098  *
2099  * Fast path event notification handler, KCQ entry carries context id
2100  *      of the connection that has 1 or more pending CQ entries
2101  */
2102 static void bnx2i_fastpath_notification(struct bnx2i_hba *hba,
2103                                         struct iscsi_kcqe *new_cqe_kcqe)
2104 {
2105         struct bnx2i_conn *bnx2i_conn;
2106         u32 iscsi_cid;
2107         int nxt_idx;
2108
2109         iscsi_cid = new_cqe_kcqe->iscsi_conn_id;
2110         bnx2i_conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
2111
2112         if (!bnx2i_conn) {
2113                 printk(KERN_ALERT "cid #%x not valid\n", iscsi_cid);
2114                 return;
2115         }
2116         if (!bnx2i_conn->ep) {
2117                 printk(KERN_ALERT "cid #%x - ep not bound\n", iscsi_cid);
2118                 return;
2119         }
2120
2121         bnx2i_process_new_cqes(bnx2i_conn);
2122         nxt_idx = bnx2i_arm_cq_event_coalescing(bnx2i_conn->ep,
2123                                                 CNIC_ARM_CQE_FP);
2124         if (nxt_idx && nxt_idx == bnx2i_process_new_cqes(bnx2i_conn))
2125                 bnx2i_arm_cq_event_coalescing(bnx2i_conn->ep, CNIC_ARM_CQE_FP);
2126 }
2127
2128
2129 /**
2130  * bnx2i_process_update_conn_cmpl - process iscsi conn update completion KCQE
2131  * @hba:                adapter structure pointer
2132  * @update_kcqe:        kcqe pointer
2133  *
2134  * CONN_UPDATE completion handler, this completes iSCSI connection FFP migration
2135  */
2136 static void bnx2i_process_update_conn_cmpl(struct bnx2i_hba *hba,
2137                                            struct iscsi_kcqe *update_kcqe)
2138 {
2139         struct bnx2i_conn *conn;
2140         u32 iscsi_cid;
2141
2142         iscsi_cid = update_kcqe->iscsi_conn_id;
2143         conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
2144
2145         if (!conn) {
2146                 printk(KERN_ALERT "conn_update: cid %x not valid\n", iscsi_cid);
2147                 return;
2148         }
2149         if (!conn->ep) {
2150                 printk(KERN_ALERT "cid %x does not have ep bound\n", iscsi_cid);
2151                 return;
2152         }
2153
2154         if (update_kcqe->completion_status) {
2155                 printk(KERN_ALERT "request failed cid %x\n", iscsi_cid);
2156                 conn->ep->state = EP_STATE_ULP_UPDATE_FAILED;
2157         } else
2158                 conn->ep->state = EP_STATE_ULP_UPDATE_COMPL;
2159
2160         wake_up_interruptible(&conn->ep->ofld_wait);
2161 }
2162
2163
2164 /**
2165  * bnx2i_recovery_que_add_conn - add connection to recovery queue
2166  * @hba:                adapter structure pointer
2167  * @bnx2i_conn:         iscsi connection
2168  *
2169  * Add connection to recovery queue and schedule adapter eh worker
2170  */
2171 static void bnx2i_recovery_que_add_conn(struct bnx2i_hba *hba,
2172                                         struct bnx2i_conn *bnx2i_conn)
2173 {
2174         iscsi_conn_failure(bnx2i_conn->cls_conn->dd_data,
2175                            ISCSI_ERR_CONN_FAILED);
2176 }
2177
2178
2179 /**
2180  * bnx2i_process_tcp_error - process error notification on a given connection
2181  *
2182  * @hba:                adapter structure pointer
2183  * @tcp_err:            tcp error kcqe pointer
2184  *
2185  * handles tcp level error notifications from FW.
2186  */
2187 static void bnx2i_process_tcp_error(struct bnx2i_hba *hba,
2188                                     struct iscsi_kcqe *tcp_err)
2189 {
2190         struct bnx2i_conn *bnx2i_conn;
2191         u32 iscsi_cid;
2192
2193         iscsi_cid = tcp_err->iscsi_conn_id;
2194         bnx2i_conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
2195
2196         if (!bnx2i_conn) {
2197                 printk(KERN_ALERT "bnx2i - cid 0x%x not valid\n", iscsi_cid);
2198                 return;
2199         }
2200
2201         printk(KERN_ALERT "bnx2i - cid 0x%x had TCP errors, error code 0x%x\n",
2202                           iscsi_cid, tcp_err->completion_status);
2203         bnx2i_recovery_que_add_conn(bnx2i_conn->hba, bnx2i_conn);
2204 }
2205
2206
2207 /**
2208  * bnx2i_process_iscsi_error - process error notification on a given connection
2209  * @hba:                adapter structure pointer
2210  * @iscsi_err:          iscsi error kcqe pointer
2211  *
2212  * handles iscsi error notifications from the FW. Firmware based in initial
2213  *      handshake classifies iscsi protocol / TCP rfc violation into either
2214  *      warning or error indications. If indication is of "Error" type, driver
2215  *      will initiate session recovery for that connection/session. For
2216  *      "Warning" type indication, driver will put out a system log message
2217  *      (there will be only one message for each type for the life of the
2218  *      session, this is to avoid un-necessarily overloading the system)
2219  */
2220 static void bnx2i_process_iscsi_error(struct bnx2i_hba *hba,
2221                                       struct iscsi_kcqe *iscsi_err)
2222 {
2223         struct bnx2i_conn *bnx2i_conn;
2224         u32 iscsi_cid;
2225         char warn_notice[] = "iscsi_warning";
2226         char error_notice[] = "iscsi_error";
2227         char additional_notice[64];
2228         char *message;
2229         int need_recovery;
2230         u64 err_mask64;
2231
2232         iscsi_cid = iscsi_err->iscsi_conn_id;
2233         bnx2i_conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
2234         if (!bnx2i_conn) {
2235                 printk(KERN_ALERT "bnx2i - cid 0x%x not valid\n", iscsi_cid);
2236                 return;
2237         }
2238
2239         err_mask64 = (0x1ULL << iscsi_err->completion_status);
2240
2241         if (err_mask64 & iscsi_error_mask) {
2242                 need_recovery = 0;
2243                 message = warn_notice;
2244         } else {
2245                 need_recovery = 1;
2246                 message = error_notice;
2247         }
2248
2249         switch (iscsi_err->completion_status) {
2250         case ISCSI_KCQE_COMPLETION_STATUS_HDR_DIG_ERR:
2251                 strcpy(additional_notice, "hdr digest err");
2252                 break;
2253         case ISCSI_KCQE_COMPLETION_STATUS_DATA_DIG_ERR:
2254                 strcpy(additional_notice, "data digest err");
2255                 break;
2256         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_OPCODE:
2257                 strcpy(additional_notice, "wrong opcode rcvd");
2258                 break;
2259         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_AHS_LEN:
2260                 strcpy(additional_notice, "AHS len > 0 rcvd");
2261                 break;
2262         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ITT:
2263                 strcpy(additional_notice, "invalid ITT rcvd");
2264                 break;
2265         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_STATSN:
2266                 strcpy(additional_notice, "wrong StatSN rcvd");
2267                 break;
2268         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN:
2269                 strcpy(additional_notice, "wrong DataSN rcvd");
2270                 break;
2271         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T:
2272                 strcpy(additional_notice, "pend R2T violation");
2273                 break;
2274         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_0:
2275                 strcpy(additional_notice, "ERL0, UO");
2276                 break;
2277         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_1:
2278                 strcpy(additional_notice, "ERL0, U1");
2279                 break;
2280         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_2:
2281                 strcpy(additional_notice, "ERL0, U2");
2282                 break;
2283         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_3:
2284                 strcpy(additional_notice, "ERL0, U3");
2285                 break;
2286         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_4:
2287                 strcpy(additional_notice, "ERL0, U4");
2288                 break;
2289         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_5:
2290                 strcpy(additional_notice, "ERL0, U5");
2291                 break;
2292         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_6:
2293                 strcpy(additional_notice, "ERL0, U6");
2294                 break;
2295         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_RCV_LEN:
2296                 strcpy(additional_notice, "invalid resi len");
2297                 break;
2298         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_RCV_PDU_LEN:
2299                 strcpy(additional_notice, "MRDSL violation");
2300                 break;
2301         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_F_BIT_ZERO:
2302                 strcpy(additional_notice, "F-bit not set");
2303                 break;
2304         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV:
2305                 strcpy(additional_notice, "invalid TTT");
2306                 break;
2307         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATASN:
2308                 strcpy(additional_notice, "invalid DataSN");
2309                 break;
2310         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_BURST_LEN:
2311                 strcpy(additional_notice, "burst len violation");
2312                 break;
2313         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_BUFFER_OFF:
2314                 strcpy(additional_notice, "buf offset violation");
2315                 break;
2316         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN:
2317                 strcpy(additional_notice, "invalid LUN field");
2318                 break;
2319         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_R2TSN:
2320                 strcpy(additional_notice, "invalid R2TSN field");
2321                 break;
2322 #define BNX2I_ERR_DESIRED_DATA_TRNS_LEN_0       \
2323         ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_0
2324         case BNX2I_ERR_DESIRED_DATA_TRNS_LEN_0:
2325                 strcpy(additional_notice, "invalid cmd len1");
2326                 break;
2327 #define BNX2I_ERR_DESIRED_DATA_TRNS_LEN_1       \
2328         ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_1
2329         case BNX2I_ERR_DESIRED_DATA_TRNS_LEN_1:
2330                 strcpy(additional_notice, "invalid cmd len2");
2331                 break;
2332         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_EXCEED:
2333                 strcpy(additional_notice,
2334                        "pend r2t exceeds MaxOutstandingR2T value");
2335                 break;
2336         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_IS_RSRV:
2337                 strcpy(additional_notice, "TTT is rsvd");
2338                 break;
2339         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_BURST_LEN:
2340                 strcpy(additional_notice, "MBL violation");
2341                 break;
2342 #define BNX2I_ERR_DATA_SEG_LEN_NOT_ZERO         \
2343         ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_NOT_ZERO
2344         case BNX2I_ERR_DATA_SEG_LEN_NOT_ZERO:
2345                 strcpy(additional_notice, "data seg len != 0");
2346                 break;
2347         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REJECT_PDU_LEN:
2348                 strcpy(additional_notice, "reject pdu len error");
2349                 break;
2350         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ASYNC_PDU_LEN:
2351                 strcpy(additional_notice, "async pdu len error");
2352                 break;
2353         case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_NOPIN_PDU_LEN:
2354                 strcpy(additional_notice, "nopin pdu len error");
2355                 break;
2356 #define BNX2_ERR_PEND_R2T_IN_CLEANUP                    \
2357         ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_IN_CLEANUP
2358         case BNX2_ERR_PEND_R2T_IN_CLEANUP:
2359                 strcpy(additional_notice, "pend r2t in cleanup");
2360                 break;
2361
2362         case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_FRAGMENT:
2363                 strcpy(additional_notice, "IP fragments rcvd");
2364                 break;
2365         case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_OPTIONS:
2366                 strcpy(additional_notice, "IP options error");
2367                 break;
2368         case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_URGENT_FLAG:
2369                 strcpy(additional_notice, "urgent flag error");
2370                 break;
2371         default:
2372                 printk(KERN_ALERT "iscsi_err - unknown err %x\n",
2373                                   iscsi_err->completion_status);
2374         }
2375
2376         if (need_recovery) {
2377                 iscsi_conn_printk(KERN_ALERT,
2378                                   bnx2i_conn->cls_conn->dd_data,
2379                                   "bnx2i: %s - %s\n",
2380                                   message, additional_notice);
2381
2382                 iscsi_conn_printk(KERN_ALERT,
2383                                   bnx2i_conn->cls_conn->dd_data,
2384                                   "conn_err - hostno %d conn %p, "
2385                                   "iscsi_cid %x cid %x\n",
2386                                   bnx2i_conn->hba->shost->host_no,
2387                                   bnx2i_conn, bnx2i_conn->ep->ep_iscsi_cid,
2388                                   bnx2i_conn->ep->ep_cid);
2389                 bnx2i_recovery_que_add_conn(bnx2i_conn->hba, bnx2i_conn);
2390         } else
2391                 if (!test_and_set_bit(iscsi_err->completion_status,
2392                                       (void *) &bnx2i_conn->violation_notified))
2393                         iscsi_conn_printk(KERN_ALERT,
2394                                           bnx2i_conn->cls_conn->dd_data,
2395                                           "bnx2i: %s - %s\n",
2396                                           message, additional_notice);
2397 }
2398
2399
2400 /**
2401  * bnx2i_process_conn_destroy_cmpl - process iscsi conn destroy completion
2402  * @hba:                adapter structure pointer
2403  * @conn_destroy:       conn destroy kcqe pointer
2404  *
2405  * handles connection destroy completion request.
2406  */
2407 static void bnx2i_process_conn_destroy_cmpl(struct bnx2i_hba *hba,
2408                                             struct iscsi_kcqe *conn_destroy)
2409 {
2410         struct bnx2i_endpoint *ep;
2411
2412         ep = bnx2i_find_ep_in_destroy_list(hba, conn_destroy->iscsi_conn_id);
2413         if (!ep) {
2414                 printk(KERN_ALERT "bnx2i_conn_destroy_cmpl: no pending "
2415                                   "offload request, unexpected complection\n");
2416                 return;
2417         }
2418
2419         if (hba != ep->hba) {
2420                 printk(KERN_ALERT "conn destroy- error hba mis-match\n");
2421                 return;
2422         }
2423
2424         if (conn_destroy->completion_status) {
2425                 printk(KERN_ALERT "conn_destroy_cmpl: op failed\n");
2426                 ep->state = EP_STATE_CLEANUP_FAILED;
2427         } else
2428                 ep->state = EP_STATE_CLEANUP_CMPL;
2429         wake_up_interruptible(&ep->ofld_wait);
2430 }
2431
2432
2433 /**
2434  * bnx2i_process_ofld_cmpl - process initial iscsi conn offload completion
2435  * @hba:                adapter structure pointer
2436  * @ofld_kcqe:          conn offload kcqe pointer
2437  *
2438  * handles initial connection offload completion, ep_connect() thread is
2439  *      woken-up to continue with LLP connect process
2440  */
2441 static void bnx2i_process_ofld_cmpl(struct bnx2i_hba *hba,
2442                                     struct iscsi_kcqe *ofld_kcqe)
2443 {
2444         u32 cid_addr;
2445         struct bnx2i_endpoint *ep;
2446         u32 cid_num;
2447
2448         ep = bnx2i_find_ep_in_ofld_list(hba, ofld_kcqe->iscsi_conn_id);
2449         if (!ep) {
2450                 printk(KERN_ALERT "ofld_cmpl: no pend offload request\n");
2451                 return;
2452         }
2453
2454         if (hba != ep->hba) {
2455                 printk(KERN_ALERT "ofld_cmpl: error hba mis-match\n");
2456                 return;
2457         }
2458
2459         if (ofld_kcqe->completion_status) {
2460                 ep->state = EP_STATE_OFLD_FAILED;
2461                 if (ofld_kcqe->completion_status ==
2462                     ISCSI_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE)
2463                         printk(KERN_ALERT "bnx2i (%s): ofld1 cmpl - unable "
2464                                 "to allocate iSCSI context resources\n",
2465                                 hba->netdev->name);
2466                 else if (ofld_kcqe->completion_status ==
2467                          ISCSI_KCQE_COMPLETION_STATUS_INVALID_OPCODE)
2468                         printk(KERN_ALERT "bnx2i (%s): ofld1 cmpl - invalid "
2469                                 "opcode\n", hba->netdev->name);
2470                 else if (ofld_kcqe->completion_status ==
2471                          ISCSI_KCQE_COMPLETION_STATUS_CID_BUSY)
2472                         /* error status code valid only for 5771x chipset */
2473                         ep->state = EP_STATE_OFLD_FAILED_CID_BUSY;
2474                 else
2475                         printk(KERN_ALERT "bnx2i (%s): ofld1 cmpl - invalid "
2476                                 "error code %d\n", hba->netdev->name,
2477                                 ofld_kcqe->completion_status);
2478         } else {
2479                 ep->state = EP_STATE_OFLD_COMPL;
2480                 cid_addr = ofld_kcqe->iscsi_conn_context_id;
2481                 cid_num = bnx2i_get_cid_num(ep);
2482                 ep->ep_cid = cid_addr;
2483                 ep->qp.ctx_base = NULL;
2484         }
2485         wake_up_interruptible(&ep->ofld_wait);
2486 }
2487
2488 /**
2489  * bnx2i_indicate_kcqe - process iscsi conn update completion KCQE
2490  * @hba:                adapter structure pointer
2491  * @update_kcqe:        kcqe pointer
2492  *
2493  * Generic KCQ event handler/dispatcher
2494  */
2495 static void bnx2i_indicate_kcqe(void *context, struct kcqe *kcqe[],
2496                                 u32 num_cqe)
2497 {
2498         struct bnx2i_hba *hba = context;
2499         int i = 0;
2500         struct iscsi_kcqe *ikcqe = NULL;
2501
2502         while (i < num_cqe) {
2503                 ikcqe = (struct iscsi_kcqe *) kcqe[i++];
2504
2505                 if (ikcqe->op_code ==
2506                     ISCSI_KCQE_OPCODE_CQ_EVENT_NOTIFICATION)
2507                         bnx2i_fastpath_notification(hba, ikcqe);
2508                 else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_OFFLOAD_CONN)
2509                         bnx2i_process_ofld_cmpl(hba, ikcqe);
2510                 else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_UPDATE_CONN)
2511                         bnx2i_process_update_conn_cmpl(hba, ikcqe);
2512                 else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_INIT) {
2513                         if (ikcqe->completion_status !=
2514                             ISCSI_KCQE_COMPLETION_STATUS_SUCCESS)
2515                                 bnx2i_iscsi_license_error(hba, ikcqe->\
2516                                                           completion_status);
2517                         else {
2518                                 set_bit(ADAPTER_STATE_UP, &hba->adapter_state);
2519                                 bnx2i_get_link_state(hba);
2520                                 printk(KERN_INFO "bnx2i [%.2x:%.2x.%.2x]: "
2521                                                  "ISCSI_INIT passed\n",
2522                                                  (u8)hba->pcidev->bus->number,
2523                                                  hba->pci_devno,
2524                                                  (u8)hba->pci_func);
2525
2526
2527                         }
2528                 } else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_DESTROY_CONN)
2529                         bnx2i_process_conn_destroy_cmpl(hba, ikcqe);
2530                 else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_ISCSI_ERROR)
2531                         bnx2i_process_iscsi_error(hba, ikcqe);
2532                 else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_TCP_ERROR)
2533                         bnx2i_process_tcp_error(hba, ikcqe);
2534                 else
2535                         printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n",
2536                                           ikcqe->op_code);
2537         }
2538 }
2539
2540
2541 /**
2542  * bnx2i_indicate_netevent - Generic netdev event handler
2543  * @context:    adapter structure pointer
2544  * @event:      event type
2545  * @vlan_id:    vlans id - associated vlan id with this event
2546  *
2547  * Handles four netdev events, NETDEV_UP, NETDEV_DOWN,
2548  *      NETDEV_GOING_DOWN and NETDEV_CHANGE
2549  */
2550 static void bnx2i_indicate_netevent(void *context, unsigned long event,
2551                                     u16 vlan_id)
2552 {
2553         struct bnx2i_hba *hba = context;
2554
2555         /* Ignore all netevent coming from vlans */
2556         if (vlan_id != 0)
2557                 return;
2558
2559         switch (event) {
2560         case NETDEV_UP:
2561                 if (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state))
2562                         bnx2i_send_fw_iscsi_init_msg(hba);
2563                 break;
2564         case NETDEV_DOWN:
2565                 clear_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state);
2566                 clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
2567                 break;
2568         case NETDEV_GOING_DOWN:
2569                 set_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state);
2570                 iscsi_host_for_each_session(hba->shost,
2571                                             bnx2i_drop_session);
2572                 break;
2573         case NETDEV_CHANGE:
2574                 bnx2i_get_link_state(hba);
2575                 break;
2576         default:
2577                 ;
2578         }
2579 }
2580
2581
2582 /**
2583  * bnx2i_cm_connect_cmpl - process iscsi conn establishment completion
2584  * @cm_sk:              cnic sock structure pointer
2585  *
2586  * function callback exported via bnx2i - cnic driver interface to
2587  *      indicate completion of option-2 TCP connect request.
2588  */
2589 static void bnx2i_cm_connect_cmpl(struct cnic_sock *cm_sk)
2590 {
2591         struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
2592
2593         if (test_bit(ADAPTER_STATE_GOING_DOWN, &ep->hba->adapter_state))
2594                 ep->state = EP_STATE_CONNECT_FAILED;
2595         else if (test_bit(SK_F_OFFLD_COMPLETE, &cm_sk->flags))
2596                 ep->state = EP_STATE_CONNECT_COMPL;
2597         else
2598                 ep->state = EP_STATE_CONNECT_FAILED;
2599
2600         wake_up_interruptible(&ep->ofld_wait);
2601 }
2602
2603
2604 /**
2605  * bnx2i_cm_close_cmpl - process tcp conn close completion
2606  * @cm_sk:      cnic sock structure pointer
2607  *
2608  * function callback exported via bnx2i - cnic driver interface to
2609  *      indicate completion of option-2 graceful TCP connect shutdown
2610  */
2611 static void bnx2i_cm_close_cmpl(struct cnic_sock *cm_sk)
2612 {
2613         struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
2614
2615         ep->state = EP_STATE_DISCONN_COMPL;
2616         wake_up_interruptible(&ep->ofld_wait);
2617 }
2618
2619
2620 /**
2621  * bnx2i_cm_abort_cmpl - process abortive tcp conn teardown completion
2622  * @cm_sk:      cnic sock structure pointer
2623  *
2624  * function callback exported via bnx2i - cnic driver interface to
2625  *      indicate completion of option-2 abortive TCP connect termination
2626  */
2627 static void bnx2i_cm_abort_cmpl(struct cnic_sock *cm_sk)
2628 {
2629         struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
2630
2631         ep->state = EP_STATE_DISCONN_COMPL;
2632         wake_up_interruptible(&ep->ofld_wait);
2633 }
2634
2635
2636 /**
2637  * bnx2i_cm_remote_close - process received TCP FIN
2638  * @hba:                adapter structure pointer
2639  * @update_kcqe:        kcqe pointer
2640  *
2641  * function callback exported via bnx2i - cnic driver interface to indicate
2642  *      async TCP events such as FIN
2643  */
2644 static void bnx2i_cm_remote_close(struct cnic_sock *cm_sk)
2645 {
2646         struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
2647
2648         ep->state = EP_STATE_TCP_FIN_RCVD;
2649         if (ep->conn)
2650                 bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
2651 }
2652
2653 /**
2654  * bnx2i_cm_remote_abort - process TCP RST and start conn cleanup
2655  * @hba:                adapter structure pointer
2656  * @update_kcqe:        kcqe pointer
2657  *
2658  * function callback exported via bnx2i - cnic driver interface to
2659  *      indicate async TCP events (RST) sent by the peer.
2660  */
2661 static void bnx2i_cm_remote_abort(struct cnic_sock *cm_sk)
2662 {
2663         struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
2664         u32 old_state = ep->state;
2665
2666         ep->state = EP_STATE_TCP_RST_RCVD;
2667         if (old_state == EP_STATE_DISCONN_START)
2668                 wake_up_interruptible(&ep->ofld_wait);
2669         else
2670                 if (ep->conn)
2671                         bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
2672 }
2673
2674
2675 static int bnx2i_send_nl_mesg(void *context, u32 msg_type,
2676                               char *buf, u16 buflen)
2677 {
2678         struct bnx2i_hba *hba = context;
2679         int rc;
2680
2681         if (!hba)
2682                 return -ENODEV;
2683
2684         rc = iscsi_offload_mesg(hba->shost, &bnx2i_iscsi_transport,
2685                                 msg_type, buf, buflen);
2686         if (rc)
2687                 printk(KERN_ALERT "bnx2i: private nl message send error\n");
2688
2689         return rc;
2690 }
2691
2692
2693 /**
2694  * bnx2i_cnic_cb - global template of bnx2i - cnic driver interface structure
2695  *                      carrying callback function pointers
2696  *
2697  */
2698 struct cnic_ulp_ops bnx2i_cnic_cb = {
2699         .cnic_init = bnx2i_ulp_init,
2700         .cnic_exit = bnx2i_ulp_exit,
2701         .cnic_start = bnx2i_start,
2702         .cnic_stop = bnx2i_stop,
2703         .indicate_kcqes = bnx2i_indicate_kcqe,
2704         .indicate_netevent = bnx2i_indicate_netevent,
2705         .cm_connect_complete = bnx2i_cm_connect_cmpl,
2706         .cm_close_complete = bnx2i_cm_close_cmpl,
2707         .cm_abort_complete = bnx2i_cm_abort_cmpl,
2708         .cm_remote_close = bnx2i_cm_remote_close,
2709         .cm_remote_abort = bnx2i_cm_remote_abort,
2710         .iscsi_nl_send_msg = bnx2i_send_nl_mesg,
2711         .cnic_get_stats = bnx2i_get_stats,
2712         .owner = THIS_MODULE
2713 };
2714
2715
2716 /**
2717  * bnx2i_map_ep_dbell_regs - map connection doorbell registers
2718  * @ep: bnx2i endpoint
2719  *
2720  * maps connection's SQ and RQ doorbell registers, 5706/5708/5709 hosts these
2721  *      register in BAR #0. Whereas in 57710 these register are accessed by
2722  *      mapping BAR #1
2723  */
2724 int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep)
2725 {
2726         u32 cid_num;
2727         u32 reg_off;
2728         u32 first_l4l5;
2729         u32 ctx_sz;
2730         u32 config2;
2731         resource_size_t reg_base;
2732
2733         cid_num = bnx2i_get_cid_num(ep);
2734
2735         if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
2736                 reg_base = pci_resource_start(ep->hba->pcidev,
2737                                               BNX2X_DOORBELL_PCI_BAR);
2738                 reg_off = BNX2I_5771X_DBELL_PAGE_SIZE * (cid_num & 0x1FFFF) +
2739                           DPM_TRIGER_TYPE;
2740                 ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off, 4);
2741                 goto arm_cq;
2742         }
2743
2744         if ((test_bit(BNX2I_NX2_DEV_5709, &ep->hba->cnic_dev_type)) &&
2745             (ep->hba->mail_queue_access == BNX2I_MQ_BIN_MODE)) {
2746                 config2 = REG_RD(ep->hba, BNX2_MQ_CONFIG2);
2747                 first_l4l5 = config2 & BNX2_MQ_CONFIG2_FIRST_L4L5;
2748                 ctx_sz = (config2 & BNX2_MQ_CONFIG2_CONT_SZ) >> 3;
2749                 if (ctx_sz)
2750                         reg_off = CTX_OFFSET + MAX_CID_CNT * MB_KERNEL_CTX_SIZE
2751                                   + BNX2I_570X_PAGE_SIZE_DEFAULT *
2752                                   (((cid_num - first_l4l5) / ctx_sz) + 256);
2753                 else
2754                         reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
2755         } else
2756                 /* 5709 device in normal node and 5706/5708 devices */
2757                 reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
2758
2759         ep->qp.ctx_base = ioremap_nocache(ep->hba->reg_base + reg_off,
2760                                           MB_KERNEL_CTX_SIZE);
2761         if (!ep->qp.ctx_base)
2762                 return -ENOMEM;
2763
2764 arm_cq:
2765         bnx2i_arm_cq_event_coalescing(ep, CNIC_ARM_CQE);
2766         return 0;
2767 }