2 * Copyright (C) ST-Ericsson SA 2010
4 * License Terms: GNU General Public License v2
6 * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
7 * Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
9 * AB8500 peripheral regulators
11 * AB8500 supports the following regulators:
12 * VAUX1/2/3, VINTCORE, VTVOUT, VAUDIO, VAMIC1/2, VDMIC, VANA
14 #include <linux/init.h>
15 #include <linux/kernel.h>
16 #include <linux/err.h>
17 #include <linux/platform_device.h>
18 #include <linux/mfd/ab8500.h>
19 #include <linux/mfd/abx500.h>
20 #include <linux/regulator/driver.h>
21 #include <linux/regulator/machine.h>
22 #include <linux/regulator/ab8500.h>
25 * struct ab8500_regulator_info - ab8500 regulator information
26 * @dev: device pointer
27 * @desc: regulator description
28 * @regulator_dev: regulator device
29 * @max_uV: maximum voltage (for variable voltage supplies)
30 * @min_uV: minimum voltage (for variable voltage supplies)
31 * @fixed_uV: typical voltage (for fixed voltage supplies)
32 * @update_bank: bank to control on/off
33 * @update_reg: register to control on/off
34 * @update_mask: mask to enable/disable regulator
35 * @update_val_enable: bits to enable the regulator in normal (high power) mode
36 * @voltage_bank: bank to control regulator voltage
37 * @voltage_reg: register to control regulator voltage
38 * @voltage_mask: mask to control regulator voltage
39 * @voltages: supported voltage table
40 * @voltages_len: number of supported voltages for the regulator
42 struct ab8500_regulator_info {
44 struct regulator_desc desc;
45 struct regulator_dev *regulator;
60 /* voltage tables for the vauxn/vintcore supplies */
61 static const int ldo_vauxn_voltages[] = {
80 static const int ldo_vaux3_voltages[] = {
91 static const int ldo_vintcore_voltages[] = {
101 static int ab8500_regulator_enable(struct regulator_dev *rdev)
104 struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
107 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
111 ret = abx500_mask_and_set_register_interruptible(info->dev,
112 info->update_bank, info->update_reg,
113 info->update_mask, info->update_val_enable);
115 dev_err(rdev_get_dev(rdev),
116 "couldn't set enable bits for regulator\n");
120 static int ab8500_regulator_disable(struct regulator_dev *rdev)
123 struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
126 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
130 ret = abx500_mask_and_set_register_interruptible(info->dev,
131 info->update_bank, info->update_reg,
132 info->update_mask, 0x0);
134 dev_err(rdev_get_dev(rdev),
135 "couldn't set disable bits for regulator\n");
139 static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
142 struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
146 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
150 ret = abx500_get_register_interruptible(info->dev,
151 info->update_bank, info->update_reg, &value);
153 dev_err(rdev_get_dev(rdev),
154 "couldn't read 0x%x register\n", info->update_reg);
158 if (value & info->update_mask)
164 static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
166 struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
169 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
173 /* return the uV for the fixed regulators */
175 return info->fixed_uV;
177 if (selector >= info->voltages_len)
180 return info->voltages[selector];
183 static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
186 struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
190 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
194 ret = abx500_get_register_interruptible(info->dev, info->voltage_bank,
195 info->voltage_reg, &value);
197 dev_err(rdev_get_dev(rdev),
198 "couldn't read voltage reg for regulator\n");
202 /* vintcore has a different layout */
203 value &= info->voltage_mask;
204 if (info->desc.id == AB8500_LDO_INTCORE)
205 ret = info->voltages[value >> 0x3];
207 ret = info->voltages[value];
212 static int ab8500_get_best_voltage_index(struct regulator_dev *rdev,
213 int min_uV, int max_uV)
215 struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
218 /* check the supported voltage */
219 for (i = 0; i < info->voltages_len; i++) {
220 if ((info->voltages[i] >= min_uV) &&
221 (info->voltages[i] <= max_uV))
228 static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
229 int min_uV, int max_uV,
233 struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
236 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
240 /* get the appropriate voltages within the range */
241 ret = ab8500_get_best_voltage_index(rdev, min_uV, max_uV);
243 dev_err(rdev_get_dev(rdev),
244 "couldn't get best voltage for regulator\n");
250 /* set the registers for the request */
251 ret = abx500_mask_and_set_register_interruptible(info->dev,
252 info->voltage_bank, info->voltage_reg,
253 info->voltage_mask, (u8)ret);
255 dev_err(rdev_get_dev(rdev),
256 "couldn't set voltage reg for regulator\n");
261 static struct regulator_ops ab8500_regulator_ops = {
262 .enable = ab8500_regulator_enable,
263 .disable = ab8500_regulator_disable,
264 .is_enabled = ab8500_regulator_is_enabled,
265 .get_voltage = ab8500_regulator_get_voltage,
266 .set_voltage = ab8500_regulator_set_voltage,
267 .list_voltage = ab8500_list_voltage,
270 static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
272 struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
275 dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
279 return info->fixed_uV;
282 static struct regulator_ops ab8500_ldo_fixed_ops = {
283 .enable = ab8500_regulator_enable,
284 .disable = ab8500_regulator_disable,
285 .is_enabled = ab8500_regulator_is_enabled,
286 .get_voltage = ab8500_fixed_get_voltage,
287 .list_voltage = ab8500_list_voltage,
290 #define AB8500_LDO(_id, _min_mV, _max_mV, \
291 _u_bank, _u_reg, _u_mask, _u_val_enable, \
292 _v_bank, _v_reg, _v_mask, _v_table, _v_table_len) \
293 [AB8500_LDO_##_id] = { \
295 .name = "LDO-" #_id, \
296 .ops = &ab8500_regulator_ops, \
297 .type = REGULATOR_VOLTAGE, \
298 .id = AB8500_LDO_##_id, \
299 .owner = THIS_MODULE, \
301 .min_uV = (_min_mV) * 1000, \
302 .max_uV = (_max_mV) * 1000, \
303 .update_bank = _u_bank, \
304 .update_reg = _u_reg, \
305 .update_mask = _u_mask, \
306 .update_val_enable = _u_val_enable, \
307 .voltage_bank = _v_bank, \
308 .voltage_reg = _v_reg, \
309 .voltage_mask = _v_mask, \
310 .voltages = _v_table, \
311 .voltages_len = _v_table_len, \
315 #define AB8500_FIXED_LDO(_id, _fixed_mV, \
316 _u_bank, _u_reg, _u_mask, _u_val_enable) \
317 [AB8500_LDO_##_id] = { \
319 .name = "LDO-" #_id, \
320 .ops = &ab8500_ldo_fixed_ops, \
321 .type = REGULATOR_VOLTAGE, \
322 .id = AB8500_LDO_##_id, \
323 .owner = THIS_MODULE, \
325 .fixed_uV = (_fixed_mV) * 1000, \
326 .update_bank = _u_bank, \
327 .update_reg = _u_reg, \
328 .update_mask = _u_mask, \
329 .update_val_enable = _u_val_enable, \
332 static struct ab8500_regulator_info ab8500_regulator_info[] = {
334 * Variable Voltage Regulators
335 * name, min mV, max mV,
336 * update bank, reg, mask, enable val
337 * volt bank, reg, mask, table, table length
339 AB8500_LDO(AUX1, 1100, 3300,
340 0x04, 0x09, 0x03, 0x01, 0x04, 0x1f, 0x0f,
341 ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
342 AB8500_LDO(AUX2, 1100, 3300,
343 0x04, 0x09, 0x0c, 0x04, 0x04, 0x20, 0x0f,
344 ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
345 AB8500_LDO(AUX3, 1100, 3300,
346 0x04, 0x0a, 0x03, 0x01, 0x04, 0x21, 0x07,
347 ldo_vaux3_voltages, ARRAY_SIZE(ldo_vaux3_voltages)),
348 AB8500_LDO(INTCORE, 1100, 3300,
349 0x03, 0x80, 0x44, 0x04, 0x03, 0x80, 0x38,
350 ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)),
353 * Fixed Voltage Regulators
355 * update bank, reg, mask, enable val
357 AB8500_FIXED_LDO(TVOUT, 2000, 0x03, 0x80, 0x82, 0x02),
358 AB8500_FIXED_LDO(AUDIO, 2000, 0x03, 0x83, 0x02, 0x02),
359 AB8500_FIXED_LDO(ANAMIC1, 2050, 0x03, 0x83, 0x08, 0x08),
360 AB8500_FIXED_LDO(ANAMIC2, 2050, 0x03, 0x83, 0x10, 0x10),
361 AB8500_FIXED_LDO(DMIC, 1800, 0x03, 0x83, 0x04, 0x04),
362 AB8500_FIXED_LDO(ANA, 1200, 0x04, 0x06, 0x0c, 0x04),
365 static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
367 struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
368 struct ab8500_platform_data *pdata;
372 dev_err(&pdev->dev, "null mfd parent\n");
375 pdata = dev_get_platdata(ab8500->dev);
377 dev_err(&pdev->dev, "null pdata\n");
381 /* make sure the platform data has the correct size */
382 if (pdata->num_regulator != ARRAY_SIZE(ab8500_regulator_info)) {
383 dev_err(&pdev->dev, "platform configuration error\n");
387 /* register all regulators */
388 for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
389 struct ab8500_regulator_info *info = NULL;
391 /* assign per-regulator data */
392 info = &ab8500_regulator_info[i];
393 info->dev = &pdev->dev;
395 /* fix for hardware before ab8500v2.0 */
396 if (abx500_get_chip_id(info->dev) < 0x20) {
397 if (info->desc.id == AB8500_LDO_AUX3) {
398 info->desc.n_voltages =
399 ARRAY_SIZE(ldo_vauxn_voltages);
400 info->voltages = ldo_vauxn_voltages;
402 ARRAY_SIZE(ldo_vauxn_voltages);
403 info->voltage_mask = 0xf;
407 /* register regulator with framework */
408 info->regulator = regulator_register(&info->desc, &pdev->dev,
409 &pdata->regulator[i], info);
410 if (IS_ERR(info->regulator)) {
411 err = PTR_ERR(info->regulator);
412 dev_err(&pdev->dev, "failed to register regulator %s\n",
414 /* when we fail, un-register all earlier regulators */
416 info = &ab8500_regulator_info[i];
417 regulator_unregister(info->regulator);
426 static __devexit int ab8500_regulator_remove(struct platform_device *pdev)
430 for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {
431 struct ab8500_regulator_info *info = NULL;
432 info = &ab8500_regulator_info[i];
433 regulator_unregister(info->regulator);
439 static struct platform_driver ab8500_regulator_driver = {
440 .probe = ab8500_regulator_probe,
441 .remove = __devexit_p(ab8500_regulator_remove),
443 .name = "ab8500-regulator",
444 .owner = THIS_MODULE,
448 static int __init ab8500_regulator_init(void)
452 ret = platform_driver_register(&ab8500_regulator_driver);
454 pr_err("Failed to register ab8500 regulator: %d\n", ret);
458 subsys_initcall(ab8500_regulator_init);
460 static void __exit ab8500_regulator_exit(void)
462 platform_driver_unregister(&ab8500_regulator_driver);
464 module_exit(ab8500_regulator_exit);
466 MODULE_LICENSE("GPL v2");
467 MODULE_AUTHOR("Sundar Iyer <sundar.iyer@stericsson.com>");
468 MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC");
469 MODULE_ALIAS("platform:ab8500-regulator");