drivers/power/ab8500_bmdata.c

   1 #include <linux/export.h>
   2 #include <linux/power_supply.h>
   3 #include <linux/of.h>
   4 #include <linux/mfd/abx500.h>
   5 #include <linux/mfd/abx500/ab8500.h>
   6 #include <linux/mfd/abx500/ab8500-bm.h>
   7
   8 /*
   9  * These are the defined batteries that uses a NTC and ID resistor placed
  10  * inside of the battery pack.
  11  * Note that the res_to_temp table must be strictly sorted by falling resistance
  12  * values to work.
  13  */
  14 static struct abx500_res_to_temp temp_tbl_A_thermistor[] = {
  15         {-5, 53407},
  16         { 0, 48594},
  17         { 5, 43804},
  18         {10, 39188},
  19         {15, 34870},
  20         {20, 30933},
  21         {25, 27422},
  22         {30, 24347},
  23         {35, 21694},
  24         {40, 19431},
  25         {45, 17517},
  26         {50, 15908},
  27         {55, 14561},
  28         {60, 13437},
  29         {65, 12500},
  30 };
  31
  32 static struct abx500_res_to_temp temp_tbl_B_thermistor[] = {
  33         {-5, 200000},
  34         { 0, 159024},
  35         { 5, 151921},
  36         {10, 144300},
  37         {15, 136424},
  38         {20, 128565},
  39         {25, 120978},
  40         {30, 113875},
  41         {35, 107397},
  42         {40, 101629},
  43         {45,  96592},
  44         {50,  92253},
  45         {55,  88569},
  46         {60,  85461},
  47         {65,  82869},
  48 };
  49
  50 static struct abx500_v_to_cap cap_tbl_A_thermistor[] = {
  51         {4171,  100},
  52         {4114,   95},
  53         {4009,   83},
  54         {3947,   74},
  55         {3907,   67},
  56         {3863,   59},
  57         {3830,   56},
  58         {3813,   53},
  59         {3791,   46},
  60         {3771,   33},
  61         {3754,   25},
  62         {3735,   20},
  63         {3717,   17},
  64         {3681,   13},
  65         {3664,    8},
  66         {3651,    6},
  67         {3635,    5},
  68         {3560,    3},
  69         {3408,    1},
  70         {3247,    0},
  71 };
  72
  73 static struct abx500_v_to_cap cap_tbl_B_thermistor[] = {
  74         {4161,  100},
  75         {4124,   98},
  76         {4044,   90},
  77         {4003,   85},
  78         {3966,   80},
  79         {3933,   75},
  80         {3888,   67},
  81         {3849,   60},
  82         {3813,   55},
  83         {3787,   47},
  84         {3772,   30},
  85         {3751,   25},
  86         {3718,   20},
  87         {3681,   16},
  88         {3660,   14},
  89         {3589,   10},
  90         {3546,    7},
  91         {3495,    4},
  92         {3404,    2},
  93         {3250,    0},
  94 };
  95
  96 static struct abx500_v_to_cap cap_tbl[] = {
  97         {4186,  100},
  98         {4163,   99},
  99         {4114,   95},
 100         {4068,   90},
 101         {3990,   80},
 102         {3926,   70},
 103         {3898,   65},
 104         {3866,   60},
 105         {3833,   55},
 106         {3812,   50},
 107         {3787,   40},
 108         {3768,   30},
 109         {3747,   25},
 110         {3730,   20},
 111         {3705,   15},
 112         {3699,   14},
 113         {3684,   12},
 114         {3672,    9},
 115         {3657,    7},
 116         {3638,    6},
 117         {3556,    4},
 118         {3424,    2},
 119         {3317,    1},
 120         {3094,    0},
 121 };
 122
 123 /*
 124  * Note that the res_to_temp table must be strictly sorted by falling
 125  * resistance values to work.
 126  */
 127 static struct abx500_res_to_temp temp_tbl[] = {
 128         {-5, 214834},
 129         { 0, 162943},
 130         { 5, 124820},
 131         {10,  96520},
 132         {15,  75306},
 133         {20,  59254},
 134         {25,  47000},
 135         {30,  37566},
 136         {35,  30245},
 137         {40,  24520},
 138         {45,  20010},
 139         {50,  16432},
 140         {55,  13576},
 141         {60,  11280},
 142         {65,   9425},
 143 };
 144
 145 /*
 146  * Note that the batres_vs_temp table must be strictly sorted by falling
 147  * temperature values to work.
 148  */
 149 static struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
 150         { 40, 120},
 151         { 30, 135},
 152         { 20, 165},
 153         { 10, 230},
 154         { 00, 325},
 155         {-10, 445},
 156         {-20, 595},
 157 };
 158
 159 /*
 160  * Note that the batres_vs_temp table must be strictly sorted by falling
 161  * temperature values to work.
 162  */
 163 static struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
 164         { 60, 300},
 165         { 30, 300},
 166         { 20, 300},
 167         { 10, 300},
 168         { 00, 300},
 169         {-10, 300},
 170         {-20, 300},
 171 };
 172
 173 /* battery resistance table for LI ION 9100 battery */
 174 static struct batres_vs_temp temp_to_batres_tbl_9100[] = {
 175         { 60, 180},
 176         { 30, 180},
 177         { 20, 180},
 178         { 10, 180},
 179         { 00, 180},
 180         {-10, 180},
 181         {-20, 180},
 182 };
 183
 184 static struct abx500_battery_type bat_type_thermistor[] = {
 185 [BATTERY_UNKNOWN] = {
 186         /* First element always represent the UNKNOWN battery */
 187         .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
 188         .resis_high = 0,
 189         .resis_low = 0,
 190         .battery_resistance = 300,
 191         .charge_full_design = 612,
 192         .nominal_voltage = 3700,
 193         .termination_vol = 4050,
 194         .termination_curr = 200,
 195         .recharge_vol = 3990,
 196         .normal_cur_lvl = 400,
 197         .normal_vol_lvl = 4100,
 198         .maint_a_cur_lvl = 400,
 199         .maint_a_vol_lvl = 4050,
 200         .maint_a_chg_timer_h = 60,
 201         .maint_b_cur_lvl = 400,
 202         .maint_b_vol_lvl = 4000,
 203         .maint_b_chg_timer_h = 200,
 204         .low_high_cur_lvl = 300,
 205         .low_high_vol_lvl = 4000,
 206         .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
 207         .r_to_t_tbl = temp_tbl,
 208         .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
 209         .v_to_cap_tbl = cap_tbl,
 210         .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
 211         .batres_tbl = temp_to_batres_tbl_thermistor,
 212 },
 213 {
 214         .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
 215         .resis_high = 53407,
 216         .resis_low = 12500,
 217         .battery_resistance = 300,
 218         .charge_full_design = 900,
 219         .nominal_voltage = 3600,
 220         .termination_vol = 4150,
 221         .termination_curr = 80,
 222         .recharge_vol = 4130,
 223         .normal_cur_lvl = 700,
 224         .normal_vol_lvl = 4200,
 225         .maint_a_cur_lvl = 600,
 226         .maint_a_vol_lvl = 4150,
 227         .maint_a_chg_timer_h = 60,
 228         .maint_b_cur_lvl = 600,
 229         .maint_b_vol_lvl = 4100,
 230         .maint_b_chg_timer_h = 200,
 231         .low_high_cur_lvl = 300,
 232         .low_high_vol_lvl = 4000,
 233         .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor),
 234         .r_to_t_tbl = temp_tbl_A_thermistor,
 235         .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor),
 236         .v_to_cap_tbl = cap_tbl_A_thermistor,
 237         .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
 238         .batres_tbl = temp_to_batres_tbl_thermistor,
 239
 240 },
 241 {
 242         .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
 243         .resis_high = 200000,
 244         .resis_low = 82869,
 245         .battery_resistance = 300,
 246         .charge_full_design = 900,
 247         .nominal_voltage = 3600,
 248         .termination_vol = 4150,
 249         .termination_curr = 80,
 250         .recharge_vol = 4130,
 251         .normal_cur_lvl = 700,
 252         .normal_vol_lvl = 4200,
 253         .maint_a_cur_lvl = 600,
 254         .maint_a_vol_lvl = 4150,
 255         .maint_a_chg_timer_h = 60,
 256         .maint_b_cur_lvl = 600,
 257         .maint_b_vol_lvl = 4100,
 258         .maint_b_chg_timer_h = 200,
 259         .low_high_cur_lvl = 300,
 260         .low_high_vol_lvl = 4000,
 261         .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor),
 262         .r_to_t_tbl = temp_tbl_B_thermistor,
 263         .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor),
 264         .v_to_cap_tbl = cap_tbl_B_thermistor,
 265         .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
 266         .batres_tbl = temp_to_batres_tbl_thermistor,
 267 },
 268 };
 269
 270 static struct abx500_battery_type bat_type_ext_thermistor[] = {
 271 [BATTERY_UNKNOWN] = {
 272         /* First element always represent the UNKNOWN battery */
 273         .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
 274         .resis_high = 0,
 275         .resis_low = 0,
 276         .battery_resistance = 300,
 277         .charge_full_design = 612,
 278         .nominal_voltage = 3700,
 279         .termination_vol = 4050,
 280         .termination_curr = 200,
 281         .recharge_vol = 3990,
 282         .normal_cur_lvl = 400,
 283         .normal_vol_lvl = 4100,
 284         .maint_a_cur_lvl = 400,
 285         .maint_a_vol_lvl = 4050,
 286         .maint_a_chg_timer_h = 60,
 287         .maint_b_cur_lvl = 400,
 288         .maint_b_vol_lvl = 4000,
 289         .maint_b_chg_timer_h = 200,
 290         .low_high_cur_lvl = 300,
 291         .low_high_vol_lvl = 4000,
 292         .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
 293         .r_to_t_tbl = temp_tbl,
 294         .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
 295         .v_to_cap_tbl = cap_tbl,
 296         .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
 297         .batres_tbl = temp_to_batres_tbl_thermistor,
 298 },
 299 /*
 300  * These are the batteries that doesn't have an internal NTC resistor to measure
 301  * its temperature. The temperature in this case is measure with a NTC placed
 302  * near the battery but on the PCB.
 303  */
 304 {
 305         .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
 306         .resis_high = 76000,
 307         .resis_low = 53000,
 308         .battery_resistance = 300,
 309         .charge_full_design = 900,
 310         .nominal_voltage = 3700,
 311         .termination_vol = 4150,
 312         .termination_curr = 100,
 313         .recharge_vol = 4130,
 314         .normal_cur_lvl = 700,
 315         .normal_vol_lvl = 4200,
 316         .maint_a_cur_lvl = 600,
 317         .maint_a_vol_lvl = 4150,
 318         .maint_a_chg_timer_h = 60,
 319         .maint_b_cur_lvl = 600,
 320         .maint_b_vol_lvl = 4100,
 321         .maint_b_chg_timer_h = 200,
 322         .low_high_cur_lvl = 300,
 323         .low_high_vol_lvl = 4000,
 324         .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
 325         .r_to_t_tbl = temp_tbl,
 326         .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
 327         .v_to_cap_tbl = cap_tbl,
 328         .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
 329         .batres_tbl = temp_to_batres_tbl_thermistor,
 330 },
 331 {
 332         .name = POWER_SUPPLY_TECHNOLOGY_LION,
 333         .resis_high = 30000,
 334         .resis_low = 10000,
 335         .battery_resistance = 300,
 336         .charge_full_design = 950,
 337         .nominal_voltage = 3700,
 338         .termination_vol = 4150,
 339         .termination_curr = 100,
 340         .recharge_vol = 4130,
 341         .normal_cur_lvl = 700,
 342         .normal_vol_lvl = 4200,
 343         .maint_a_cur_lvl = 600,
 344         .maint_a_vol_lvl = 4150,
 345         .maint_a_chg_timer_h = 60,
 346         .maint_b_cur_lvl = 600,
 347         .maint_b_vol_lvl = 4100,
 348         .maint_b_chg_timer_h = 200,
 349         .low_high_cur_lvl = 300,
 350         .low_high_vol_lvl = 4000,
 351         .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
 352         .r_to_t_tbl = temp_tbl,
 353         .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
 354         .v_to_cap_tbl = cap_tbl,
 355         .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
 356         .batres_tbl = temp_to_batres_tbl_thermistor,
 357 },
 358 {
 359         .name = POWER_SUPPLY_TECHNOLOGY_LION,
 360         .resis_high = 95000,
 361         .resis_low = 76001,
 362         .battery_resistance = 300,
 363         .charge_full_design = 950,
 364         .nominal_voltage = 3700,
 365         .termination_vol = 4150,
 366         .termination_curr = 100,
 367         .recharge_vol = 4130,
 368         .normal_cur_lvl = 700,
 369         .normal_vol_lvl = 4200,
 370         .maint_a_cur_lvl = 600,
 371         .maint_a_vol_lvl = 4150,
 372         .maint_a_chg_timer_h = 60,
 373         .maint_b_cur_lvl = 600,
 374         .maint_b_vol_lvl = 4100,
 375         .maint_b_chg_timer_h = 200,
 376         .low_high_cur_lvl = 300,
 377         .low_high_vol_lvl = 4000,
 378         .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
 379         .r_to_t_tbl = temp_tbl,
 380         .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
 381         .v_to_cap_tbl = cap_tbl,
 382         .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
 383         .batres_tbl = temp_to_batres_tbl_thermistor,
 384 },
 385 };
 386
 387 static const struct abx500_bm_capacity_levels cap_levels = {
 388         .critical       = 2,
 389         .low            = 10,
 390         .normal         = 70,
 391         .high           = 95,
 392         .full           = 100,
 393 };
 394
 395 static const struct abx500_fg_parameters fg = {
 396         .recovery_sleep_timer = 10,
 397         .recovery_total_time = 100,
 398         .init_timer = 1,
 399         .init_discard_time = 5,
 400         .init_total_time = 40,
 401         .high_curr_time = 60,
 402         .accu_charging = 30,
 403         .accu_high_curr = 30,
 404         .high_curr_threshold = 50,
 405         .lowbat_threshold = 3100,
 406         .battok_falling_th_sel0 = 2860,
 407         .battok_raising_th_sel1 = 2860,
 408         .user_cap_limit = 15,
 409         .maint_thres = 97,
 410 };
 411
 412 static const struct abx500_maxim_parameters maxi_params = {
 413         .ena_maxi = true,
 414         .chg_curr = 910,
 415         .wait_cycles = 10,
 416         .charger_curr_step = 100,
 417 };
 418
 419 static const struct abx500_bm_charger_parameters chg = {
 420         .usb_volt_max           = 5500,
 421         .usb_curr_max           = 1500,
 422         .ac_volt_max            = 7500,
 423         .ac_curr_max            = 1500,
 424 };
 425
 426 struct abx500_bm_data ab8500_bm_data = {
 427         .temp_under             = 3,
 428         .temp_low               = 8,
 429         .temp_high              = 43,
 430         .temp_over              = 48,
 431         .main_safety_tmr_h      = 4,
 432         .temp_interval_chg      = 20,
 433         .temp_interval_nochg    = 120,
 434         .usb_safety_tmr_h       = 4,
 435         .bkup_bat_v             = BUP_VCH_SEL_2P6V,
 436         .bkup_bat_i             = BUP_ICH_SEL_150UA,
 437         .no_maintenance         = false,
 438         .adc_therm              = ABx500_ADC_THERM_BATCTRL,
 439         .chg_unknown_bat        = false,
 440         .enable_overshoot       = false,
 441         .fg_res                 = 100,
 442         .cap_levels             = &cap_levels,
 443         .bat_type               = bat_type_thermistor,
 444         .n_btypes               = 3,
 445         .batt_id                = 0,
 446         .interval_charging      = 5,
 447         .interval_not_charging  = 120,
 448         .temp_hysteresis        = 3,
 449         .gnd_lift_resistance    = 34,
 450         .maxi                   = &maxi_params,
 451         .chg_params             = &chg,
 452         .fg_params              = &fg,
 453 };
 454
 455 int bmdevs_of_probe(struct device *dev, struct device_node *np,
 456                     struct abx500_bm_data **battery)
 457 {
 458         struct  abx500_battery_type *btype;
 459         struct  device_node *np_bat_supply;
 460         struct  abx500_bm_data *bat;
 461         const char *btech;
 462         char bat_tech[8];
 463         int i, thermistor;
 464
 465         *battery = &ab8500_bm_data;
 466
 467         /* get phandle to 'battery-info' node */
 468         np_bat_supply = of_parse_phandle(np, "battery", 0);
 469         if (!np_bat_supply) {
 470                 dev_err(dev, "missing property battery\n");
 471                 return -EINVAL;
 472         }
 473         if (of_property_read_bool(np_bat_supply,
 474                         "thermistor-on-batctrl"))
 475                 thermistor = NTC_INTERNAL;
 476         else
 477                 thermistor = NTC_EXTERNAL;
 478
 479         bat = *battery;
 480         if (thermistor == NTC_EXTERNAL) {
 481                 bat->n_btypes  = 4;
 482                 bat->bat_type  = bat_type_ext_thermistor;
 483                 bat->adc_therm = ABx500_ADC_THERM_BATTEMP;
 484         }
 485         btech = of_get_property(np_bat_supply,
 486                 "stericsson,battery-type", NULL);
 487         if (!btech) {
 488                 dev_warn(dev, "missing property battery-name/type\n");
 489                 strcpy(bat_tech, "UNKNOWN");
 490         } else {
 491                 strcpy(bat_tech, btech);
 492         }
 493
 494         if (strncmp(bat_tech, "LION", 4) == 0) {
 495                 bat->no_maintenance  = true;
 496                 bat->chg_unknown_bat = true;
 497                 bat->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600;
 498                 bat->bat_type[BATTERY_UNKNOWN].termination_vol    = 4150;
 499                 bat->bat_type[BATTERY_UNKNOWN].recharge_vol       = 4130;
 500                 bat->bat_type[BATTERY_UNKNOWN].normal_cur_lvl     = 520;
 501                 bat->bat_type[BATTERY_UNKNOWN].normal_vol_lvl     = 4200;
 502         }
 503         /* select the battery resolution table */
 504         for (i = 0; i < bat->n_btypes; ++i) {
 505                 btype = (bat->bat_type + i);
 506                 if (thermistor == NTC_EXTERNAL) {
 507                         btype->batres_tbl =
 508                                 temp_to_batres_tbl_ext_thermistor;
 509                 } else if (strncmp(bat_tech, "LION", 4) == 0) {
 510                         btype->batres_tbl =
 511                                 temp_to_batres_tbl_9100;
 512                 } else {
 513                         btype->batres_tbl =
 514                                 temp_to_batres_tbl_thermistor;
 515                 }
 516         }
 517         of_node_put(np_bat_supply);
 518         return 0;
 519 }