drivers/net/wireless/rtlwifi/core.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2009-2010  Realtek Corporation.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17  *
  18  * The full GNU General Public License is included in this distribution in the
  19  * file called LICENSE.
  20  *
  21  * Contact Information:
  22  * wlanfae <wlanfae@realtek.com>
  23  * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
  24  * Hsinchu 300, Taiwan.
  25  *
  26  * Larry Finger <Larry.Finger@lwfinger.net>
  27  *
  28  *****************************************************************************/
  29
  30 #include "wifi.h"
  31 #include "core.h"
  32 #include "cam.h"
  33 #include "base.h"
  34 #include "ps.h"
  35
  36 /*mutex for start & stop is must here. */
  37 static int rtl_op_start(struct ieee80211_hw *hw)
  38 {
  39         int err;
  40         struct rtl_priv *rtlpriv = rtl_priv(hw);
  41         struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
  42
  43         if (!is_hal_stop(rtlhal))
  44                 return 0;
  45         if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status))
  46                 return 0;
  47         mutex_lock(&rtlpriv->locks.conf_mutex);
  48         err = rtlpriv->intf_ops->adapter_start(hw);
  49         if (!err)
  50                 rtl_watch_dog_timer_callback((unsigned long)hw);
  51         mutex_unlock(&rtlpriv->locks.conf_mutex);
  52         return err;
  53 }
  54
  55 static void rtl_op_stop(struct ieee80211_hw *hw)
  56 {
  57         struct rtl_priv *rtlpriv = rtl_priv(hw);
  58         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
  59         struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
  60         struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
  61
  62         if (is_hal_stop(rtlhal))
  63                 return;
  64
  65         if (unlikely(ppsc->rfpwr_state == ERFOFF)) {
  66                 rtl_ips_nic_on(hw);
  67                 mdelay(1);
  68         }
  69
  70         mutex_lock(&rtlpriv->locks.conf_mutex);
  71
  72         mac->link_state = MAC80211_NOLINK;
  73         memset(mac->bssid, 0, 6);
  74         mac->vendor = PEER_UNKNOWN;
  75
  76         /*reset sec info */
  77         rtl_cam_reset_sec_info(hw);
  78
  79         rtl_deinit_deferred_work(hw);
  80         rtlpriv->intf_ops->adapter_stop(hw);
  81
  82         mutex_unlock(&rtlpriv->locks.conf_mutex);
  83 }
  84
  85 static void rtl_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
  86 {
  87         struct rtl_priv *rtlpriv = rtl_priv(hw);
  88         struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
  89         struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
  90         struct rtl_tcb_desc tcb_desc;
  91         memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));
  92
  93         if (unlikely(is_hal_stop(rtlhal) || ppsc->rfpwr_state != ERFON))
  94                 goto err_free;
  95
  96         if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status))
  97                 goto err_free;
  98
  99         if (!rtlpriv->intf_ops->waitq_insert(hw, skb))
 100                 rtlpriv->intf_ops->adapter_tx(hw, skb, &tcb_desc);
 101
 102         return;
 103
 104 err_free:
 105         dev_kfree_skb_any(skb);
 106 }
 107
 108 static int rtl_op_add_interface(struct ieee80211_hw *hw,
 109                 struct ieee80211_vif *vif)
 110 {
 111         struct rtl_priv *rtlpriv = rtl_priv(hw);
 112         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 113         int err = 0;
 114
 115         if (mac->vif) {
 116                 RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
 117                          ("vif has been set!! mac->vif = 0x%p\n", mac->vif));
 118                 return -EOPNOTSUPP;
 119         }
 120
 121         rtl_ips_nic_on(hw);
 122
 123         mutex_lock(&rtlpriv->locks.conf_mutex);
 124         switch (vif->type) {
 125         case NL80211_IFTYPE_STATION:
 126                 if (mac->beacon_enabled == 1) {
 127                         RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 128                                  ("NL80211_IFTYPE_STATION\n"));
 129                         mac->beacon_enabled = 0;
 130                         rtlpriv->cfg->ops->update_interrupt_mask(hw, 0,
 131                                         rtlpriv->cfg->maps
 132                                         [RTL_IBSS_INT_MASKS]);
 133                 }
 134                 break;
 135         case NL80211_IFTYPE_ADHOC:
 136                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 137                          ("NL80211_IFTYPE_ADHOC\n"));
 138
 139                 mac->link_state = MAC80211_LINKED;
 140                 rtlpriv->cfg->ops->set_bcn_reg(hw);
 141                 if (rtlpriv->rtlhal.current_bandtype == BAND_ON_2_4G)
 142                         mac->basic_rates = 0xfff;
 143                 else
 144                         mac->basic_rates = 0xff0;
 145                 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE,
 146                                 (u8 *) (&mac->basic_rates));
 147
 148                 break;
 149         case NL80211_IFTYPE_AP:
 150                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 151                          ("NL80211_IFTYPE_AP\n"));
 152
 153                 mac->link_state = MAC80211_LINKED;
 154                 rtlpriv->cfg->ops->set_bcn_reg(hw);
 155                 if (rtlpriv->rtlhal.current_bandtype == BAND_ON_2_4G)
 156                         mac->basic_rates = 0xfff;
 157                 else
 158                         mac->basic_rates = 0xff0;
 159                 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE,
 160                                 (u8 *) (&mac->basic_rates));
 161                 break;
 162         default:
 163                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 164                          ("operation mode %d is not support!\n", vif->type));
 165                 err = -EOPNOTSUPP;
 166                 goto out;
 167         }
 168
 169         mac->vif = vif;
 170         mac->opmode = vif->type;
 171         rtlpriv->cfg->ops->set_network_type(hw, vif->type);
 172         memcpy(mac->mac_addr, vif->addr, ETH_ALEN);
 173         rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr);
 174
 175 out:
 176         mutex_unlock(&rtlpriv->locks.conf_mutex);
 177         return err;
 178 }
 179
 180 static void rtl_op_remove_interface(struct ieee80211_hw *hw,
 181                 struct ieee80211_vif *vif)
 182 {
 183         struct rtl_priv *rtlpriv = rtl_priv(hw);
 184         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 185
 186         mutex_lock(&rtlpriv->locks.conf_mutex);
 187
 188         /* Free beacon resources */
 189         if ((mac->opmode == NL80211_IFTYPE_AP) ||
 190             (mac->opmode == NL80211_IFTYPE_ADHOC) ||
 191             (mac->opmode == NL80211_IFTYPE_MESH_POINT)) {
 192                 if (mac->beacon_enabled == 1) {
 193                         mac->beacon_enabled = 0;
 194                         rtlpriv->cfg->ops->update_interrupt_mask(hw, 0,
 195                                         rtlpriv->cfg->maps
 196                                         [RTL_IBSS_INT_MASKS]);
 197                 }
 198         }
 199
 200         /*
 201          *Note: We assume NL80211_IFTYPE_UNSPECIFIED as
 202          *NO LINK for our hardware.
 203          */
 204         mac->vif = NULL;
 205         mac->link_state = MAC80211_NOLINK;
 206         memset(mac->bssid, 0, 6);
 207         mac->vendor = PEER_UNKNOWN;
 208         mac->opmode = NL80211_IFTYPE_UNSPECIFIED;
 209         rtlpriv->cfg->ops->set_network_type(hw, mac->opmode);
 210         mutex_unlock(&rtlpriv->locks.conf_mutex);
 211 }
 212
 213 static int rtl_op_config(struct ieee80211_hw *hw, u32 changed)
 214 {
 215         struct rtl_priv *rtlpriv = rtl_priv(hw);
 216         struct rtl_phy *rtlphy = &(rtlpriv->phy);
 217         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 218         struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 219         struct ieee80211_conf *conf = &hw->conf;
 220
 221         mutex_lock(&rtlpriv->locks.conf_mutex);
 222         if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {  /*BIT(2)*/
 223                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 224                          ("IEEE80211_CONF_CHANGE_LISTEN_INTERVAL\n"));
 225         }
 226
 227         /*For IPS */
 228         if (changed & IEEE80211_CONF_CHANGE_IDLE) {
 229                 if (hw->conf.flags & IEEE80211_CONF_IDLE)
 230                         rtl_ips_nic_off(hw);
 231                 else
 232                         rtl_ips_nic_on(hw);
 233         } else {
 234                 /*
 235                  *although rfoff may not cause by ips, but we will
 236                  *check the reason in set_rf_power_state function
 237                  */
 238                 if (unlikely(ppsc->rfpwr_state == ERFOFF))
 239                         rtl_ips_nic_on(hw);
 240         }
 241
 242         /*For LPS */
 243         if (changed & IEEE80211_CONF_CHANGE_PS) {
 244                 cancel_delayed_work(&rtlpriv->works.ps_work);
 245                 cancel_delayed_work(&rtlpriv->works.ps_rfon_wq);
 246                 if (conf->flags & IEEE80211_CONF_PS) {
 247                         rtlpriv->psc.sw_ps_enabled = true;
 248                         /* sleep here is must, or we may recv the beacon and
 249                          * cause mac80211 into wrong ps state, this will cause
 250                          * power save nullfunc send fail, and further cause
 251                          * pkt loss, So sleep must quickly but not immediatly
 252                          * because that will cause nullfunc send by mac80211
 253                          * fail, and cause pkt loss, we have tested that 5mA
 254                          * is worked very well */
 255                         if (!rtlpriv->psc.multi_buffered)
 256                                 queue_delayed_work(rtlpriv->works.rtl_wq,
 257                                                 &rtlpriv->works.ps_work,
 258                                                 MSECS(5));
 259                 } else {
 260                         rtl_swlps_rf_awake(hw);
 261                         rtlpriv->psc.sw_ps_enabled = false;
 262                 }
 263         }
 264
 265         if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
 266                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 267                          ("IEEE80211_CONF_CHANGE_RETRY_LIMITS %x\n",
 268                           hw->conf.long_frame_max_tx_count));
 269                 mac->retry_long = hw->conf.long_frame_max_tx_count;
 270                 mac->retry_short = hw->conf.long_frame_max_tx_count;
 271                 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RETRY_LIMIT,
 272                                               (u8 *) (&hw->conf.
 273                                                       long_frame_max_tx_count));
 274         }
 275
 276         if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
 277                 struct ieee80211_channel *channel = hw->conf.channel;
 278                 u8 wide_chan = (u8) channel->hw_value;
 279
 280                 /*
 281                  *because we should back channel to
 282                  *current_network.chan in in scanning,
 283                  *So if set_chan == current_network.chan
 284                  *we should set it.
 285                  *because mac80211 tell us wrong bw40
 286                  *info for cisco1253 bw20, so we modify
 287                  *it here based on UPPER & LOWER
 288                  */
 289                 switch (hw->conf.channel_type) {
 290                 case NL80211_CHAN_HT20:
 291                 case NL80211_CHAN_NO_HT:
 292                         /* SC */
 293                         mac->cur_40_prime_sc =
 294                                 PRIME_CHNL_OFFSET_DONT_CARE;
 295                         rtlphy->current_chan_bw = HT_CHANNEL_WIDTH_20;
 296                         mac->bw_40 = false;
 297                         break;
 298                 case NL80211_CHAN_HT40MINUS:
 299                         /* SC */
 300                         mac->cur_40_prime_sc = PRIME_CHNL_OFFSET_UPPER;
 301                         rtlphy->current_chan_bw =
 302                                 HT_CHANNEL_WIDTH_20_40;
 303                         mac->bw_40 = true;
 304
 305                         /*wide channel */
 306                         wide_chan -= 2;
 307
 308                         break;
 309                 case NL80211_CHAN_HT40PLUS:
 310                         /* SC */
 311                         mac->cur_40_prime_sc = PRIME_CHNL_OFFSET_LOWER;
 312                         rtlphy->current_chan_bw =
 313                                 HT_CHANNEL_WIDTH_20_40;
 314                         mac->bw_40 = true;
 315
 316                         /*wide channel */
 317                         wide_chan += 2;
 318
 319                         break;
 320                 default:
 321                         mac->bw_40 = false;
 322                         RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 323                                         ("switch case not processed\n"));
 324                         break;
 325                 }
 326
 327                 if (wide_chan <= 0)
 328                         wide_chan = 1;
 329
 330                 /* In scanning, before we go offchannel we may send a ps=1 null
 331                  * to AP, and then we may send a ps = 0 null to AP quickly, but
 332                  * first null may have caused AP to put lots of packet to hw tx
 333                  * buffer. These packets must be tx'd before we go off channel
 334                  * so we must delay more time to let AP flush these packets
 335                  * before going offchannel, or dis-association or delete BA will
 336                  * happen by AP
 337                  */
 338                 if (rtlpriv->mac80211.offchan_delay) {
 339                         rtlpriv->mac80211.offchan_delay = false;
 340                         mdelay(50);
 341                 }
 342                 rtlphy->current_channel = wide_chan;
 343
 344                 rtlpriv->cfg->ops->switch_channel(hw);
 345                 rtlpriv->cfg->ops->set_channel_access(hw);
 346                 rtlpriv->cfg->ops->set_bw_mode(hw,
 347                                                hw->conf.channel_type);
 348         }
 349
 350         mutex_unlock(&rtlpriv->locks.conf_mutex);
 351
 352         return 0;
 353 }
 354
 355 static void rtl_op_configure_filter(struct ieee80211_hw *hw,
 356                              unsigned int changed_flags,
 357                              unsigned int *new_flags, u64 multicast)
 358 {
 359         struct rtl_priv *rtlpriv = rtl_priv(hw);
 360         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 361
 362         *new_flags &= RTL_SUPPORTED_FILTERS;
 363         if (!changed_flags)
 364                 return;
 365
 366         /*TODO: we disable broadcase now, so enable here */
 367         if (changed_flags & FIF_ALLMULTI) {
 368                 if (*new_flags & FIF_ALLMULTI) {
 369                         mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AM] |
 370                             rtlpriv->cfg->maps[MAC_RCR_AB];
 371                         RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 372                                  ("Enable receive multicast frame.\n"));
 373                 } else {
 374                         mac->rx_conf &= ~(rtlpriv->cfg->maps[MAC_RCR_AM] |
 375                                           rtlpriv->cfg->maps[MAC_RCR_AB]);
 376                         RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 377                                  ("Disable receive multicast frame.\n"));
 378                 }
 379         }
 380
 381         if (changed_flags & FIF_FCSFAIL) {
 382                 if (*new_flags & FIF_FCSFAIL) {
 383                         mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACRC32];
 384                         RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 385                                  ("Enable receive FCS error frame.\n"));
 386                 } else {
 387                         mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACRC32];
 388                         RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 389                                  ("Disable receive FCS error frame.\n"));
 390                 }
 391         }
 392
 393         /* if ssid not set to hw don't check bssid
 394          * here just used for linked scanning, & linked
 395          * and nolink check bssid is set in set network_type */
 396         if ((changed_flags & FIF_BCN_PRBRESP_PROMISC) &&
 397                 (mac->link_state >= MAC80211_LINKED)) {
 398                 if (mac->opmode != NL80211_IFTYPE_AP) {
 399                         if (*new_flags & FIF_BCN_PRBRESP_PROMISC) {
 400                                 rtlpriv->cfg->ops->set_chk_bssid(hw, false);
 401                         } else {
 402                                 rtlpriv->cfg->ops->set_chk_bssid(hw, true);
 403                         }
 404                 }
 405         }
 406
 407         if (changed_flags & FIF_CONTROL) {
 408                 if (*new_flags & FIF_CONTROL) {
 409                         mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACF];
 410
 411                         RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 412                                  ("Enable receive control frame.\n"));
 413                 } else {
 414                         mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACF];
 415                         RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 416                                  ("Disable receive control frame.\n"));
 417                 }
 418         }
 419
 420         if (changed_flags & FIF_OTHER_BSS) {
 421                 if (*new_flags & FIF_OTHER_BSS) {
 422                         mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AAP];
 423                         RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 424                                  ("Enable receive other BSS's frame.\n"));
 425                 } else {
 426                         mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_AAP];
 427                         RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 428                                  ("Disable receive other BSS's frame.\n"));
 429                 }
 430         }
 431 }
 432 static int rtl_op_sta_add(struct ieee80211_hw *hw,
 433                          struct ieee80211_vif *vif,
 434                          struct ieee80211_sta *sta)
 435 {
 436         struct rtl_priv *rtlpriv = rtl_priv(hw);
 437         struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 438         struct rtl_sta_info *sta_entry;
 439
 440         if (sta) {
 441                 sta_entry = (struct rtl_sta_info *) sta->drv_priv;
 442                 if (rtlhal->current_bandtype == BAND_ON_2_4G) {
 443                         sta_entry->wireless_mode = WIRELESS_MODE_G;
 444                         if (sta->supp_rates[0] <= 0xf)
 445                                 sta_entry->wireless_mode = WIRELESS_MODE_B;
 446                         if (sta->ht_cap.ht_supported)
 447                                 sta_entry->wireless_mode = WIRELESS_MODE_N_24G;
 448                 } else if (rtlhal->current_bandtype == BAND_ON_5G) {
 449                         sta_entry->wireless_mode = WIRELESS_MODE_A;
 450                         if (sta->ht_cap.ht_supported)
 451                                 sta_entry->wireless_mode = WIRELESS_MODE_N_24G;
 452                 }
 453
 454                 /* I found some times mac80211 give wrong supp_rates for adhoc*/
 455                 if (rtlpriv->mac80211.opmode == NL80211_IFTYPE_ADHOC)
 456                         sta_entry->wireless_mode = WIRELESS_MODE_G;
 457
 458                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
 459                         ("Add sta addr is %pM\n", sta->addr));
 460                 rtlpriv->cfg->ops->update_rate_tbl(hw, sta, 0);
 461         }
 462         return 0;
 463 }
 464 static int rtl_op_sta_remove(struct ieee80211_hw *hw,
 465                                 struct ieee80211_vif *vif,
 466                                 struct ieee80211_sta *sta)
 467 {
 468         struct rtl_priv *rtlpriv = rtl_priv(hw);
 469         struct rtl_sta_info *sta_entry;
 470         if (sta) {
 471                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
 472                         ("Remove sta addr is %pM\n", sta->addr));
 473                 sta_entry = (struct rtl_sta_info *) sta->drv_priv;
 474                 sta_entry->wireless_mode = 0;
 475                 sta_entry->ratr_index = 0;
 476         }
 477         return 0;
 478 }
 479 static int _rtl_get_hal_qnum(u16 queue)
 480 {
 481         int qnum;
 482
 483         switch (queue) {
 484         case 0:
 485                 qnum = AC3_VO;
 486                 break;
 487         case 1:
 488                 qnum = AC2_VI;
 489                 break;
 490         case 2:
 491                 qnum = AC0_BE;
 492                 break;
 493         case 3:
 494                 qnum = AC1_BK;
 495                 break;
 496         default:
 497                 qnum = AC0_BE;
 498                 break;
 499         }
 500         return qnum;
 501 }
 502
 503 /*
 504  *for mac80211 VO=0, VI=1, BE=2, BK=3
 505  *for rtl819x  BE=0, BK=1, VI=2, VO=3
 506  */
 507 static int rtl_op_conf_tx(struct ieee80211_hw *hw,
 508                    struct ieee80211_vif *vif, u16 queue,
 509                    const struct ieee80211_tx_queue_params *param)
 510 {
 511         struct rtl_priv *rtlpriv = rtl_priv(hw);
 512         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 513         int aci;
 514
 515         if (queue >= AC_MAX) {
 516                 RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
 517                          ("queue number %d is incorrect!\n", queue));
 518                 return -EINVAL;
 519         }
 520
 521         aci = _rtl_get_hal_qnum(queue);
 522         mac->ac[aci].aifs = param->aifs;
 523         mac->ac[aci].cw_min = cpu_to_le16(param->cw_min);
 524         mac->ac[aci].cw_max = cpu_to_le16(param->cw_max);
 525         mac->ac[aci].tx_op = cpu_to_le16(param->txop);
 526         memcpy(&mac->edca_param[aci], param, sizeof(*param));
 527         rtlpriv->cfg->ops->set_qos(hw, aci);
 528         return 0;
 529 }
 530
 531 static void rtl_op_bss_info_changed(struct ieee80211_hw *hw,
 532                              struct ieee80211_vif *vif,
 533                              struct ieee80211_bss_conf *bss_conf, u32 changed)
 534 {
 535         struct rtl_priv *rtlpriv = rtl_priv(hw);
 536         struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
 537         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 538         struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
 539         struct ieee80211_sta *sta = NULL;
 540
 541         mutex_lock(&rtlpriv->locks.conf_mutex);
 542         if ((vif->type == NL80211_IFTYPE_ADHOC) ||
 543             (vif->type == NL80211_IFTYPE_AP) ||
 544             (vif->type == NL80211_IFTYPE_MESH_POINT)) {
 545                 if ((changed & BSS_CHANGED_BEACON) ||
 546                     (changed & BSS_CHANGED_BEACON_ENABLED &&
 547                      bss_conf->enable_beacon)) {
 548                         if (mac->beacon_enabled == 0) {
 549                                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
 550                                          ("BSS_CHANGED_BEACON_ENABLED\n"));
 551
 552                                 /*start hw beacon interrupt. */
 553                                 /*rtlpriv->cfg->ops->set_bcn_reg(hw); */
 554                                 mac->beacon_enabled = 1;
 555                                 rtlpriv->cfg->ops->update_interrupt_mask(hw,
 556                                                 rtlpriv->cfg->maps
 557                                                 [RTL_IBSS_INT_MASKS],
 558                                                 0);
 559
 560                                 if (rtlpriv->cfg->ops->linked_set_reg)
 561                                         rtlpriv->cfg->ops->linked_set_reg(hw);
 562                         }
 563                 }
 564                 if ((changed & BSS_CHANGED_BEACON_ENABLED &&
 565                         !bss_conf->enable_beacon)) {
 566                         if (mac->beacon_enabled == 1) {
 567                                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
 568                                          ("ADHOC DISABLE BEACON\n"));
 569
 570                                 mac->beacon_enabled = 0;
 571                                 rtlpriv->cfg->ops->update_interrupt_mask(hw, 0,
 572                                                 rtlpriv->cfg->maps
 573                                                 [RTL_IBSS_INT_MASKS]);
 574                         }
 575                 }
 576                 if (changed & BSS_CHANGED_BEACON_INT) {
 577                         RT_TRACE(rtlpriv, COMP_BEACON, DBG_TRACE,
 578                                  ("BSS_CHANGED_BEACON_INT\n"));
 579                         mac->beacon_interval = bss_conf->beacon_int;
 580                         rtlpriv->cfg->ops->set_bcn_intv(hw);
 581                 }
 582         }
 583
 584         /*TODO: reference to enum ieee80211_bss_change */
 585         if (changed & BSS_CHANGED_ASSOC) {
 586                 if (bss_conf->assoc) {
 587                         /* we should reset all sec info & cam
 588                          * before set cam after linked, we should not
 589                          * reset in disassoc, that will cause tkip->wep
 590                          * fail because some flag will be wrong */
 591                         /* reset sec info */
 592                         rtl_cam_reset_sec_info(hw);
 593                         /* reset cam to fix wep fail issue
 594                          * when change from wpa to wep */
 595                         rtl_cam_reset_all_entry(hw);
 596
 597                         mac->link_state = MAC80211_LINKED;
 598                         mac->cnt_after_linked = 0;
 599                         mac->assoc_id = bss_conf->aid;
 600                         memcpy(mac->bssid, bss_conf->bssid, 6);
 601
 602                         if (rtlpriv->cfg->ops->linked_set_reg)
 603                                 rtlpriv->cfg->ops->linked_set_reg(hw);
 604                         if (mac->opmode == NL80211_IFTYPE_STATION && sta)
 605                                 rtlpriv->cfg->ops->update_rate_tbl(hw, sta, 0);
 606                         RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
 607                                  ("BSS_CHANGED_ASSOC\n"));
 608                 } else {
 609                         if (mac->link_state == MAC80211_LINKED)
 610                                 rtl_lps_leave(hw);
 611
 612                         mac->link_state = MAC80211_NOLINK;
 613                         memset(mac->bssid, 0, 6);
 614
 615                         /* reset sec info */
 616                         rtl_cam_reset_sec_info(hw);
 617
 618                         rtl_cam_reset_all_entry(hw);
 619                         mac->vendor = PEER_UNKNOWN;
 620
 621                         RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
 622                                  ("BSS_CHANGED_UN_ASSOC\n"));
 623                 }
 624         }
 625
 626         if (changed & BSS_CHANGED_ERP_CTS_PROT) {
 627                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
 628                          ("BSS_CHANGED_ERP_CTS_PROT\n"));
 629                 mac->use_cts_protect = bss_conf->use_cts_prot;
 630         }
 631
 632         if (changed & BSS_CHANGED_ERP_PREAMBLE) {
 633                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
 634                          ("BSS_CHANGED_ERP_PREAMBLE use short preamble:%x\n",
 635                           bss_conf->use_short_preamble));
 636
 637                 mac->short_preamble = bss_conf->use_short_preamble;
 638                 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACK_PREAMBLE,
 639                                               (u8 *) (&mac->short_preamble));
 640         }
 641
 642         if (changed & BSS_CHANGED_ERP_SLOT) {
 643                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
 644                          ("BSS_CHANGED_ERP_SLOT\n"));
 645
 646                 if (bss_conf->use_short_slot)
 647                         mac->slot_time = RTL_SLOT_TIME_9;
 648                 else
 649                         mac->slot_time = RTL_SLOT_TIME_20;
 650
 651                 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
 652                                               (u8 *) (&mac->slot_time));
 653         }
 654
 655         if (changed & BSS_CHANGED_HT) {
 656                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
 657                          ("BSS_CHANGED_HT\n"));
 658                 rcu_read_lock();
 659                 sta = get_sta(hw, vif, bss_conf->bssid);
 660                 if (sta) {
 661                         if (sta->ht_cap.ampdu_density >
 662                             mac->current_ampdu_density)
 663                                 mac->current_ampdu_density =
 664                                     sta->ht_cap.ampdu_density;
 665                         if (sta->ht_cap.ampdu_factor <
 666                             mac->current_ampdu_factor)
 667                                 mac->current_ampdu_factor =
 668                                     sta->ht_cap.ampdu_factor;
 669                 }
 670                 rcu_read_unlock();
 671
 672                 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SHORTGI_DENSITY,
 673                                               (u8 *) (&mac->max_mss_density));
 674                 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AMPDU_FACTOR,
 675                                               &mac->current_ampdu_factor);
 676                 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AMPDU_MIN_SPACE,
 677                                               &mac->current_ampdu_density);
 678         }
 679
 680         if (changed & BSS_CHANGED_BSSID) {
 681                 u32 basic_rates;
 682
 683                 rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BSSID,
 684                                               (u8 *) bss_conf->bssid);
 685
 686                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
 687                          ("%pM\n", bss_conf->bssid));
 688
 689                 mac->vendor = PEER_UNKNOWN;
 690                 memcpy(mac->bssid, bss_conf->bssid, 6);
 691                 rtlpriv->cfg->ops->set_network_type(hw, vif->type);
 692
 693                 rcu_read_lock();
 694                 sta = get_sta(hw, vif, bss_conf->bssid);
 695                 if (!sta) {
 696                         rcu_read_unlock();
 697                         goto out;
 698                 }
 699
 700                 if (rtlhal->current_bandtype == BAND_ON_5G) {
 701                         mac->mode = WIRELESS_MODE_A;
 702                 } else {
 703                         if (sta->supp_rates[0] <= 0xf)
 704                                 mac->mode = WIRELESS_MODE_B;
 705                         else
 706                                 mac->mode = WIRELESS_MODE_G;
 707                 }
 708
 709                 if (sta->ht_cap.ht_supported) {
 710                         if (rtlhal->current_bandtype == BAND_ON_2_4G)
 711                                 mac->mode = WIRELESS_MODE_N_24G;
 712                         else
 713                                 mac->mode = WIRELESS_MODE_N_5G;
 714                 }
 715
 716                 /* just station need it, because ibss & ap mode will
 717                  * set in sta_add, and will be NULL here */
 718                 if (mac->opmode == NL80211_IFTYPE_STATION) {
 719                         struct rtl_sta_info *sta_entry;
 720                         sta_entry = (struct rtl_sta_info *) sta->drv_priv;
 721                         sta_entry->wireless_mode = mac->mode;
 722                 }
 723
 724                 if (sta->ht_cap.ht_supported) {
 725                         mac->ht_enable = true;
 726
 727                         /*
 728                          * for cisco 1252 bw20 it's wrong
 729                          * if (ht_cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
 730                          *      mac->bw_40 = true;
 731                          * }
 732                          * */
 733                 }
 734
 735                 if (changed & BSS_CHANGED_BASIC_RATES) {
 736                         /* for 5G must << RATE_6M_INDEX=4,
 737                          * because 5G have no cck rate*/
 738                         if (rtlhal->current_bandtype == BAND_ON_5G)
 739                                 basic_rates = sta->supp_rates[1] << 4;
 740                         else
 741                                 basic_rates = sta->supp_rates[0];
 742
 743                         mac->basic_rates = basic_rates;
 744                         rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE,
 745                                         (u8 *) (&basic_rates));
 746                 }
 747                 rcu_read_unlock();
 748         }
 749
 750         /*
 751          * For FW LPS:
 752          * To tell firmware we have connected
 753          * to an AP. For 92SE/CE power save v2.
 754          */
 755         if (changed & BSS_CHANGED_ASSOC) {
 756                 if (bss_conf->assoc) {
 757                         if (ppsc->fwctrl_lps) {
 758                                 u8 mstatus = RT_MEDIA_CONNECT;
 759                                 rtlpriv->cfg->ops->set_hw_reg(hw,
 760                                                       HW_VAR_H2C_FW_JOINBSSRPT,
 761                                                       (u8 *) (&mstatus));
 762                                 ppsc->report_linked = true;
 763                         }
 764                 } else {
 765                         if (ppsc->fwctrl_lps) {
 766                                 u8 mstatus = RT_MEDIA_DISCONNECT;
 767                                 rtlpriv->cfg->ops->set_hw_reg(hw,
 768                                                       HW_VAR_H2C_FW_JOINBSSRPT,
 769                                                       (u8 *)(&mstatus));
 770                                 ppsc->report_linked = false;
 771                         }
 772                 }
 773         }
 774
 775 out:
 776         mutex_unlock(&rtlpriv->locks.conf_mutex);
 777 }
 778
 779 static u64 rtl_op_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 780 {
 781         struct rtl_priv *rtlpriv = rtl_priv(hw);
 782         u64 tsf;
 783
 784         rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_CORRECT_TSF, (u8 *) (&tsf));
 785         return tsf;
 786 }
 787
 788 static void rtl_op_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 789                            u64 tsf)
 790 {
 791         struct rtl_priv *rtlpriv = rtl_priv(hw);
 792         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 793         u8 bibss = (mac->opmode == NL80211_IFTYPE_ADHOC) ? 1 : 0;
 794
 795         mac->tsf = tsf;
 796         rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_CORRECT_TSF, (u8 *) (&bibss));
 797 }
 798
 799 static void rtl_op_reset_tsf(struct ieee80211_hw *hw,
 800                              struct ieee80211_vif *vif)
 801 {
 802         struct rtl_priv *rtlpriv = rtl_priv(hw);
 803         u8 tmp = 0;
 804
 805         rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_DUAL_TSF_RST, (u8 *) (&tmp));
 806 }
 807
 808 static void rtl_op_sta_notify(struct ieee80211_hw *hw,
 809                               struct ieee80211_vif *vif,
 810                               enum sta_notify_cmd cmd,
 811                               struct ieee80211_sta *sta)
 812 {
 813         switch (cmd) {
 814         case STA_NOTIFY_SLEEP:
 815                 break;
 816         case STA_NOTIFY_AWAKE:
 817                 break;
 818         default:
 819                 break;
 820         }
 821 }
 822
 823 static int rtl_op_ampdu_action(struct ieee80211_hw *hw,
 824                                struct ieee80211_vif *vif,
 825                                enum ieee80211_ampdu_mlme_action action,
 826                                struct ieee80211_sta *sta, u16 tid, u16 *ssn,
 827                                u8 buf_size)
 828 {
 829         struct rtl_priv *rtlpriv = rtl_priv(hw);
 830
 831         switch (action) {
 832         case IEEE80211_AMPDU_TX_START:
 833                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
 834                          ("IEEE80211_AMPDU_TX_START: TID:%d\n", tid));
 835                 return rtl_tx_agg_start(hw, sta, tid, ssn);
 836                 break;
 837         case IEEE80211_AMPDU_TX_STOP:
 838                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
 839                          ("IEEE80211_AMPDU_TX_STOP: TID:%d\n", tid));
 840                 return rtl_tx_agg_stop(hw, sta, tid);
 841                 break;
 842         case IEEE80211_AMPDU_TX_OPERATIONAL:
 843                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
 844                          ("IEEE80211_AMPDU_TX_OPERATIONAL:TID:%d\n", tid));
 845                 rtl_tx_agg_oper(hw, sta, tid);
 846                 break;
 847         case IEEE80211_AMPDU_RX_START:
 848                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
 849                          ("IEEE80211_AMPDU_RX_START:TID:%d\n", tid));
 850                 break;
 851         case IEEE80211_AMPDU_RX_STOP:
 852                 RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
 853                          ("IEEE80211_AMPDU_RX_STOP:TID:%d\n", tid));
 854                 break;
 855         default:
 856                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 857                          ("IEEE80211_AMPDU_ERR!!!!:\n"));
 858                 return -EOPNOTSUPP;
 859         }
 860         return 0;
 861 }
 862
 863 static void rtl_op_sw_scan_start(struct ieee80211_hw *hw)
 864 {
 865         struct rtl_priv *rtlpriv = rtl_priv(hw);
 866         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 867
 868         mac->act_scanning = true;
 869
 870         RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, ("\n"));
 871
 872         if (mac->link_state == MAC80211_LINKED) {
 873                 rtl_lps_leave(hw);
 874                 mac->link_state = MAC80211_LINKED_SCANNING;
 875         } else {
 876                 rtl_ips_nic_on(hw);
 877         }
 878
 879         /* Dual mac */
 880         rtlpriv->rtlhal.load_imrandiqk_setting_for2g = false;
 881
 882         rtlpriv->cfg->ops->led_control(hw, LED_CTL_SITE_SURVEY);
 883         rtlpriv->cfg->ops->scan_operation_backup(hw, SCAN_OPT_BACKUP);
 884 }
 885
 886 static void rtl_op_sw_scan_complete(struct ieee80211_hw *hw)
 887 {
 888         struct rtl_priv *rtlpriv = rtl_priv(hw);
 889         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 890
 891         RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, ("\n"));
 892         mac->act_scanning = false;
 893         /* Dual mac */
 894         rtlpriv->rtlhal.load_imrandiqk_setting_for2g = false;
 895
 896         if (mac->link_state == MAC80211_LINKED_SCANNING) {
 897                 mac->link_state = MAC80211_LINKED;
 898                 if (mac->opmode == NL80211_IFTYPE_STATION) {
 899                         /* fix fwlps issue */
 900                         rtlpriv->cfg->ops->set_network_type(hw, mac->opmode);
 901                 }
 902         }
 903
 904         rtlpriv->cfg->ops->scan_operation_backup(hw, SCAN_OPT_RESTORE);
 905 }
 906
 907 static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 908                           struct ieee80211_vif *vif, struct ieee80211_sta *sta,
 909                           struct ieee80211_key_conf *key)
 910 {
 911         struct rtl_priv *rtlpriv = rtl_priv(hw);
 912         struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
 913         u8 key_type = NO_ENCRYPTION;
 914         u8 key_idx;
 915         bool group_key = false;
 916         bool wep_only = false;
 917         int err = 0;
 918         u8 mac_addr[ETH_ALEN];
 919         u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 920         u8 zero_addr[ETH_ALEN] = { 0 };
 921
 922         if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
 923                 RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
 924                          ("not open hw encryption\n"));
 925                 return -ENOSPC; /*User disabled HW-crypto */
 926         }
 927         RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
 928                  ("%s hardware based encryption for keyidx: %d, mac: %pM\n",
 929                   cmd == SET_KEY ? "Using" : "Disabling", key->keyidx,
 930                   sta ? sta->addr : bcast_addr));
 931         rtlpriv->sec.being_setkey = true;
 932         rtl_ips_nic_on(hw);
 933         mutex_lock(&rtlpriv->locks.conf_mutex);
 934         /* <1> get encryption alg */
 935
 936         switch (key->cipher) {
 937         case WLAN_CIPHER_SUITE_WEP40:
 938                 key_type = WEP40_ENCRYPTION;
 939                 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("alg:WEP40\n"));
 940                 break;
 941         case WLAN_CIPHER_SUITE_WEP104:
 942                 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
 943                          ("alg:WEP104\n"));
 944                 key_type = WEP104_ENCRYPTION;
 945                 break;
 946         case WLAN_CIPHER_SUITE_TKIP:
 947                 key_type = TKIP_ENCRYPTION;
 948                 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("alg:TKIP\n"));
 949                 break;
 950         case WLAN_CIPHER_SUITE_CCMP:
 951                 key_type = AESCCMP_ENCRYPTION;
 952                 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("alg:CCMP\n"));
 953                 break;
 954         default:
 955                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
 956                          ("alg_err:%x!!!!:\n", key->cipher));
 957                 goto out_unlock;
 958         }
 959         if (key_type == WEP40_ENCRYPTION ||
 960                         key_type == WEP104_ENCRYPTION ||
 961                         mac->opmode == NL80211_IFTYPE_ADHOC)
 962                 rtlpriv->sec.use_defaultkey = true;
 963
 964         /* <2> get key_idx */
 965         key_idx = (u8) (key->keyidx);
 966         if (key_idx > 3)
 967                 goto out_unlock;
 968         /* <3> if pairwise key enable_hw_sec */
 969         group_key = !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE);
 970
 971         /* wep always be group key, but there are two conditions:
 972          * 1) wep only: is just for wep enc, in this condition
 973          * rtlpriv->sec.pairwise_enc_algorithm == NO_ENCRYPTION
 974          * will be true & enable_hw_sec will be set when wep
 975          * ke setting.
 976          * 2) wep(group) + AES(pairwise): some AP like cisco
 977          * may use it, in this condition enable_hw_sec will not
 978          * be set when wep key setting */
 979         /* we must reset sec_info after lingked before set key,
 980          * or some flag will be wrong*/
 981         if (mac->opmode == NL80211_IFTYPE_AP) {
 982                 if (!group_key || key_type == WEP40_ENCRYPTION ||
 983                         key_type == WEP104_ENCRYPTION) {
 984                         if (group_key)
 985                                 wep_only = true;
 986                         rtlpriv->cfg->ops->enable_hw_sec(hw);
 987                 }
 988         } else {
 989                 if ((!group_key) || (mac->opmode == NL80211_IFTYPE_ADHOC) ||
 990                      rtlpriv->sec.pairwise_enc_algorithm == NO_ENCRYPTION) {
 991                         if (rtlpriv->sec.pairwise_enc_algorithm ==
 992                             NO_ENCRYPTION &&
 993                             (key_type == WEP40_ENCRYPTION ||
 994                             key_type == WEP104_ENCRYPTION))
 995                                 wep_only = true;
 996                         rtlpriv->sec.pairwise_enc_algorithm = key_type;
 997                         RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
 998                                 ("set enable_hw_sec, key_type:%x(OPEN:0 WEP40:1"
 999                                 " TKIP:2 AES:4 WEP104:5)\n", key_type));
1000                         rtlpriv->cfg->ops->enable_hw_sec(hw);
1001                 }
1002         }
1003         /* <4> set key based on cmd */
1004         switch (cmd) {
1005         case SET_KEY:
1006                 if (wep_only) {
1007                         RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
1008                                  ("set WEP(group/pairwise) key\n"));
1009                         /* Pairwise key with an assigned MAC address. */
1010                         rtlpriv->sec.pairwise_enc_algorithm = key_type;
1011                         rtlpriv->sec.group_enc_algorithm = key_type;
1012                         /*set local buf about wep key. */
1013                         memcpy(rtlpriv->sec.key_buf[key_idx],
1014                                key->key, key->keylen);
1015                         rtlpriv->sec.key_len[key_idx] = key->keylen;
1016                         memcpy(mac_addr, zero_addr, ETH_ALEN);
1017                 } else if (group_key) { /* group key */
1018                         RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
1019                                  ("set group key\n"));
1020                         /* group key */
1021                         rtlpriv->sec.group_enc_algorithm = key_type;
1022                         /*set local buf about group key. */
1023                         memcpy(rtlpriv->sec.key_buf[key_idx],
1024                                key->key, key->keylen);
1025                         rtlpriv->sec.key_len[key_idx] = key->keylen;
1026                         memcpy(mac_addr, bcast_addr, ETH_ALEN);
1027                 } else {        /* pairwise key */
1028                         RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
1029                                  ("set pairwise key\n"));
1030                         if (!sta) {
1031                                 RT_ASSERT(false, ("pairwise key withnot"
1032                                                   "mac_addr\n"));
1033
1034                                 err = -EOPNOTSUPP;
1035                                 goto out_unlock;
1036                         }
1037                         /* Pairwise key with an assigned MAC address. */
1038                         rtlpriv->sec.pairwise_enc_algorithm = key_type;
1039                         /*set local buf about pairwise key. */
1040                         memcpy(rtlpriv->sec.key_buf[PAIRWISE_KEYIDX],
1041                                key->key, key->keylen);
1042                         rtlpriv->sec.key_len[PAIRWISE_KEYIDX] = key->keylen;
1043                         rtlpriv->sec.pairwise_key =
1044                             rtlpriv->sec.key_buf[PAIRWISE_KEYIDX];
1045                         memcpy(mac_addr, sta->addr, ETH_ALEN);
1046                 }
1047                 rtlpriv->cfg->ops->set_key(hw, key_idx, mac_addr,
1048                                            group_key, key_type, wep_only,
1049                                            false);
1050                 /* <5> tell mac80211 do something: */
1051                 /*must use sw generate IV, or can not work !!!!. */
1052                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
1053                 key->hw_key_idx = key_idx;
1054                 if (key_type == TKIP_ENCRYPTION)
1055                         key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
1056                 break;
1057         case DISABLE_KEY:
1058                 RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
1059                          ("disable key delete one entry\n"));
1060                 /*set local buf about wep key. */
1061                 if (mac->opmode == NL80211_IFTYPE_AP) {
1062                         if (sta)
1063                                 rtl_cam_del_entry(hw, sta->addr);
1064                 }
1065                 memset(rtlpriv->sec.key_buf[key_idx], 0, key->keylen);
1066                 rtlpriv->sec.key_len[key_idx] = 0;
1067                 memcpy(mac_addr, zero_addr, ETH_ALEN);
1068                 /*
1069                  *mac80211 will delete entrys one by one,
1070                  *so don't use rtl_cam_reset_all_entry
1071                  *or clear all entry here.
1072                  */
1073                 rtl_cam_delete_one_entry(hw, mac_addr, key_idx);
1074
1075                 rtl_cam_reset_sec_info(hw);
1076
1077                 break;
1078         default:
1079                 RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
1080                          ("cmd_err:%x!!!!:\n", cmd));
1081         }
1082 out_unlock:
1083         mutex_unlock(&rtlpriv->locks.conf_mutex);
1084         rtlpriv->sec.being_setkey = false;
1085         return err;
1086 }
1087
1088 static void rtl_op_rfkill_poll(struct ieee80211_hw *hw)
1089 {
1090         struct rtl_priv *rtlpriv = rtl_priv(hw);
1091
1092         bool radio_state;
1093         bool blocked;
1094         u8 valid = 0;
1095
1096         if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status))
1097                 return;
1098
1099         mutex_lock(&rtlpriv->locks.conf_mutex);
1100
1101         /*if Radio On return true here */
1102         radio_state = rtlpriv->cfg->ops->radio_onoff_checking(hw, &valid);
1103
1104         if (valid) {
1105                 if (unlikely(radio_state != rtlpriv->rfkill.rfkill_state)) {
1106                         rtlpriv->rfkill.rfkill_state = radio_state;
1107
1108                         RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
1109                                  (KERN_INFO "wireless radio switch turned %s\n",
1110                                   radio_state ? "on" : "off"));
1111
1112                         blocked = (rtlpriv->rfkill.rfkill_state == 1) ? 0 : 1;
1113                         wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
1114                 }
1115         }
1116
1117         mutex_unlock(&rtlpriv->locks.conf_mutex);
1118 }
1119
1120 /* this function is called by mac80211 to flush tx buffer
1121  * before switch channle or power save, or tx buffer packet
1122  * maybe send after offchannel or rf sleep, this may cause
1123  * dis-association by AP */
1124 static void rtl_op_flush(struct ieee80211_hw *hw, bool drop)
1125 {
1126         struct rtl_priv *rtlpriv = rtl_priv(hw);
1127
1128         if (rtlpriv->intf_ops->flush)
1129                 rtlpriv->intf_ops->flush(hw, drop);
1130 }
1131
1132 const struct ieee80211_ops rtl_ops = {
1133         .start = rtl_op_start,
1134         .stop = rtl_op_stop,
1135         .tx = rtl_op_tx,
1136         .add_interface = rtl_op_add_interface,
1137         .remove_interface = rtl_op_remove_interface,
1138         .config = rtl_op_config,
1139         .configure_filter = rtl_op_configure_filter,
1140         .sta_add = rtl_op_sta_add,
1141         .sta_remove = rtl_op_sta_remove,
1142         .set_key = rtl_op_set_key,
1143         .conf_tx = rtl_op_conf_tx,
1144         .bss_info_changed = rtl_op_bss_info_changed,
1145         .get_tsf = rtl_op_get_tsf,
1146         .set_tsf = rtl_op_set_tsf,
1147         .reset_tsf = rtl_op_reset_tsf,
1148         .sta_notify = rtl_op_sta_notify,
1149         .ampdu_action = rtl_op_ampdu_action,
1150         .sw_scan_start = rtl_op_sw_scan_start,
1151         .sw_scan_complete = rtl_op_sw_scan_complete,
1152         .rfkill_poll = rtl_op_rfkill_poll,
1153         .flush = rtl_op_flush,
1154 };