2 Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
3 <http://rt2x00.serialmonkey.com>
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 Abstract: rt73usb device specific routines.
24 Supported chipsets: rt2571W & rt2671.
27 #include <linux/crc-itu-t.h>
28 #include <linux/delay.h>
29 #include <linux/etherdevice.h>
30 #include <linux/init.h>
31 #include <linux/kernel.h>
32 #include <linux/module.h>
33 #include <linux/slab.h>
34 #include <linux/usb.h>
37 #include "rt2x00usb.h"
41 * Allow hardware encryption to be disabled.
43 static int modparam_nohwcrypt;
44 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
45 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
49 * All access to the CSR registers will go through the methods
50 * rt2x00usb_register_read and rt2x00usb_register_write.
51 * BBP and RF register require indirect register access,
52 * and use the CSR registers BBPCSR and RFCSR to achieve this.
53 * These indirect registers work with busy bits,
54 * and we will try maximal REGISTER_BUSY_COUNT times to access
55 * the register while taking a REGISTER_BUSY_DELAY us delay
56 * between each attampt. When the busy bit is still set at that time,
57 * the access attempt is considered to have failed,
58 * and we will print an error.
59 * The _lock versions must be used if you already hold the csr_mutex
61 #define WAIT_FOR_BBP(__dev, __reg) \
62 rt2x00usb_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg))
63 #define WAIT_FOR_RF(__dev, __reg) \
64 rt2x00usb_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg))
66 static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev,
67 const unsigned int word, const u8 value)
71 mutex_lock(&rt2x00dev->csr_mutex);
74 * Wait until the BBP becomes available, afterwards we
75 * can safely write the new data into the register.
77 if (WAIT_FOR_BBP(rt2x00dev, ®)) {
79 rt2x00_set_field32(®, PHY_CSR3_VALUE, value);
80 rt2x00_set_field32(®, PHY_CSR3_REGNUM, word);
81 rt2x00_set_field32(®, PHY_CSR3_BUSY, 1);
82 rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 0);
84 rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
87 mutex_unlock(&rt2x00dev->csr_mutex);
90 static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
91 const unsigned int word, u8 *value)
95 mutex_lock(&rt2x00dev->csr_mutex);
98 * Wait until the BBP becomes available, afterwards we
99 * can safely write the read request into the register.
100 * After the data has been written, we wait until hardware
101 * returns the correct value, if at any time the register
102 * doesn't become available in time, reg will be 0xffffffff
103 * which means we return 0xff to the caller.
105 if (WAIT_FOR_BBP(rt2x00dev, ®)) {
107 rt2x00_set_field32(®, PHY_CSR3_REGNUM, word);
108 rt2x00_set_field32(®, PHY_CSR3_BUSY, 1);
109 rt2x00_set_field32(®, PHY_CSR3_READ_CONTROL, 1);
111 rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
113 WAIT_FOR_BBP(rt2x00dev, ®);
116 *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
118 mutex_unlock(&rt2x00dev->csr_mutex);
121 static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev,
122 const unsigned int word, const u32 value)
126 mutex_lock(&rt2x00dev->csr_mutex);
129 * Wait until the RF becomes available, afterwards we
130 * can safely write the new data into the register.
132 if (WAIT_FOR_RF(rt2x00dev, ®)) {
134 rt2x00_set_field32(®, PHY_CSR4_VALUE, value);
136 * RF5225 and RF2527 contain 21 bits per RF register value,
137 * all others contain 20 bits.
139 rt2x00_set_field32(®, PHY_CSR4_NUMBER_OF_BITS,
140 20 + (rt2x00_rf(rt2x00dev, RF5225) ||
141 rt2x00_rf(rt2x00dev, RF2527)));
142 rt2x00_set_field32(®, PHY_CSR4_IF_SELECT, 0);
143 rt2x00_set_field32(®, PHY_CSR4_BUSY, 1);
145 rt2x00usb_register_write_lock(rt2x00dev, PHY_CSR4, reg);
146 rt2x00_rf_write(rt2x00dev, word, value);
149 mutex_unlock(&rt2x00dev->csr_mutex);
152 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
153 static const struct rt2x00debug rt73usb_rt2x00debug = {
154 .owner = THIS_MODULE,
156 .read = rt2x00usb_register_read,
157 .write = rt2x00usb_register_write,
158 .flags = RT2X00DEBUGFS_OFFSET,
159 .word_base = CSR_REG_BASE,
160 .word_size = sizeof(u32),
161 .word_count = CSR_REG_SIZE / sizeof(u32),
164 .read = rt2x00_eeprom_read,
165 .write = rt2x00_eeprom_write,
166 .word_base = EEPROM_BASE,
167 .word_size = sizeof(u16),
168 .word_count = EEPROM_SIZE / sizeof(u16),
171 .read = rt73usb_bbp_read,
172 .write = rt73usb_bbp_write,
173 .word_base = BBP_BASE,
174 .word_size = sizeof(u8),
175 .word_count = BBP_SIZE / sizeof(u8),
178 .read = rt2x00_rf_read,
179 .write = rt73usb_rf_write,
180 .word_base = RF_BASE,
181 .word_size = sizeof(u32),
182 .word_count = RF_SIZE / sizeof(u32),
185 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
187 static int rt73usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
191 rt2x00usb_register_read(rt2x00dev, MAC_CSR13, ®);
192 return rt2x00_get_field32(reg, MAC_CSR13_BIT7);
195 #ifdef CONFIG_RT2X00_LIB_LEDS
196 static void rt73usb_brightness_set(struct led_classdev *led_cdev,
197 enum led_brightness brightness)
199 struct rt2x00_led *led =
200 container_of(led_cdev, struct rt2x00_led, led_dev);
201 unsigned int enabled = brightness != LED_OFF;
202 unsigned int a_mode =
203 (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
204 unsigned int bg_mode =
205 (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
207 if (led->type == LED_TYPE_RADIO) {
208 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
209 MCU_LEDCS_RADIO_STATUS, enabled);
211 rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
212 0, led->rt2x00dev->led_mcu_reg,
214 } else if (led->type == LED_TYPE_ASSOC) {
215 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
216 MCU_LEDCS_LINK_BG_STATUS, bg_mode);
217 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
218 MCU_LEDCS_LINK_A_STATUS, a_mode);
220 rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
221 0, led->rt2x00dev->led_mcu_reg,
223 } else if (led->type == LED_TYPE_QUALITY) {
225 * The brightness is divided into 6 levels (0 - 5),
226 * this means we need to convert the brightness
227 * argument into the matching level within that range.
229 rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
230 brightness / (LED_FULL / 6),
231 led->rt2x00dev->led_mcu_reg,
236 static int rt73usb_blink_set(struct led_classdev *led_cdev,
237 unsigned long *delay_on,
238 unsigned long *delay_off)
240 struct rt2x00_led *led =
241 container_of(led_cdev, struct rt2x00_led, led_dev);
244 rt2x00usb_register_read(led->rt2x00dev, MAC_CSR14, ®);
245 rt2x00_set_field32(®, MAC_CSR14_ON_PERIOD, *delay_on);
246 rt2x00_set_field32(®, MAC_CSR14_OFF_PERIOD, *delay_off);
247 rt2x00usb_register_write(led->rt2x00dev, MAC_CSR14, reg);
252 static void rt73usb_init_led(struct rt2x00_dev *rt2x00dev,
253 struct rt2x00_led *led,
256 led->rt2x00dev = rt2x00dev;
258 led->led_dev.brightness_set = rt73usb_brightness_set;
259 led->led_dev.blink_set = rt73usb_blink_set;
260 led->flags = LED_INITIALIZED;
262 #endif /* CONFIG_RT2X00_LIB_LEDS */
265 * Configuration handlers.
267 static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
268 struct rt2x00lib_crypto *crypto,
269 struct ieee80211_key_conf *key)
271 struct hw_key_entry key_entry;
272 struct rt2x00_field32 field;
276 if (crypto->cmd == SET_KEY) {
278 * rt2x00lib can't determine the correct free
279 * key_idx for shared keys. We have 1 register
280 * with key valid bits. The goal is simple, read
281 * the register, if that is full we have no slots
283 * Note that each BSS is allowed to have up to 4
284 * shared keys, so put a mask over the allowed
287 mask = (0xf << crypto->bssidx);
289 rt2x00usb_register_read(rt2x00dev, SEC_CSR0, ®);
292 if (reg && reg == mask)
295 key->hw_key_idx += reg ? ffz(reg) : 0;
298 * Upload key to hardware
300 memcpy(key_entry.key, crypto->key,
301 sizeof(key_entry.key));
302 memcpy(key_entry.tx_mic, crypto->tx_mic,
303 sizeof(key_entry.tx_mic));
304 memcpy(key_entry.rx_mic, crypto->rx_mic,
305 sizeof(key_entry.rx_mic));
307 reg = SHARED_KEY_ENTRY(key->hw_key_idx);
308 rt2x00usb_register_multiwrite(rt2x00dev, reg,
309 &key_entry, sizeof(key_entry));
312 * The cipher types are stored over 2 registers.
313 * bssidx 0 and 1 keys are stored in SEC_CSR1 and
314 * bssidx 1 and 2 keys are stored in SEC_CSR5.
315 * Using the correct defines correctly will cause overhead,
316 * so just calculate the correct offset.
318 if (key->hw_key_idx < 8) {
319 field.bit_offset = (3 * key->hw_key_idx);
320 field.bit_mask = 0x7 << field.bit_offset;
322 rt2x00usb_register_read(rt2x00dev, SEC_CSR1, ®);
323 rt2x00_set_field32(®, field, crypto->cipher);
324 rt2x00usb_register_write(rt2x00dev, SEC_CSR1, reg);
326 field.bit_offset = (3 * (key->hw_key_idx - 8));
327 field.bit_mask = 0x7 << field.bit_offset;
329 rt2x00usb_register_read(rt2x00dev, SEC_CSR5, ®);
330 rt2x00_set_field32(®, field, crypto->cipher);
331 rt2x00usb_register_write(rt2x00dev, SEC_CSR5, reg);
335 * The driver does not support the IV/EIV generation
336 * in hardware. However it doesn't support the IV/EIV
337 * inside the ieee80211 frame either, but requires it
338 * to be provided separately for the descriptor.
339 * rt2x00lib will cut the IV/EIV data out of all frames
340 * given to us by mac80211, but we must tell mac80211
341 * to generate the IV/EIV data.
343 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
347 * SEC_CSR0 contains only single-bit fields to indicate
348 * a particular key is valid. Because using the FIELD32()
349 * defines directly will cause a lot of overhead we use
350 * a calculation to determine the correct bit directly.
352 mask = 1 << key->hw_key_idx;
354 rt2x00usb_register_read(rt2x00dev, SEC_CSR0, ®);
355 if (crypto->cmd == SET_KEY)
357 else if (crypto->cmd == DISABLE_KEY)
359 rt2x00usb_register_write(rt2x00dev, SEC_CSR0, reg);
364 static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
365 struct rt2x00lib_crypto *crypto,
366 struct ieee80211_key_conf *key)
368 struct hw_pairwise_ta_entry addr_entry;
369 struct hw_key_entry key_entry;
373 if (crypto->cmd == SET_KEY) {
375 * rt2x00lib can't determine the correct free
376 * key_idx for pairwise keys. We have 2 registers
377 * with key valid bits. The goal is simple, read
378 * the first register, if that is full move to
380 * When both registers are full, we drop the key,
381 * otherwise we use the first invalid entry.
383 rt2x00usb_register_read(rt2x00dev, SEC_CSR2, ®);
384 if (reg && reg == ~0) {
385 key->hw_key_idx = 32;
386 rt2x00usb_register_read(rt2x00dev, SEC_CSR3, ®);
387 if (reg && reg == ~0)
391 key->hw_key_idx += reg ? ffz(reg) : 0;
394 * Upload key to hardware
396 memcpy(key_entry.key, crypto->key,
397 sizeof(key_entry.key));
398 memcpy(key_entry.tx_mic, crypto->tx_mic,
399 sizeof(key_entry.tx_mic));
400 memcpy(key_entry.rx_mic, crypto->rx_mic,
401 sizeof(key_entry.rx_mic));
403 reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
404 rt2x00usb_register_multiwrite(rt2x00dev, reg,
405 &key_entry, sizeof(key_entry));
408 * Send the address and cipher type to the hardware register.
410 memset(&addr_entry, 0, sizeof(addr_entry));
411 memcpy(&addr_entry, crypto->address, ETH_ALEN);
412 addr_entry.cipher = crypto->cipher;
414 reg = PAIRWISE_TA_ENTRY(key->hw_key_idx);
415 rt2x00usb_register_multiwrite(rt2x00dev, reg,
416 &addr_entry, sizeof(addr_entry));
419 * Enable pairwise lookup table for given BSS idx,
420 * without this received frames will not be decrypted
423 rt2x00usb_register_read(rt2x00dev, SEC_CSR4, ®);
424 reg |= (1 << crypto->bssidx);
425 rt2x00usb_register_write(rt2x00dev, SEC_CSR4, reg);
428 * The driver does not support the IV/EIV generation
429 * in hardware. However it doesn't support the IV/EIV
430 * inside the ieee80211 frame either, but requires it
431 * to be provided separately for the descriptor.
432 * rt2x00lib will cut the IV/EIV data out of all frames
433 * given to us by mac80211, but we must tell mac80211
434 * to generate the IV/EIV data.
436 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
440 * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
441 * a particular key is valid. Because using the FIELD32()
442 * defines directly will cause a lot of overhead we use
443 * a calculation to determine the correct bit directly.
445 if (key->hw_key_idx < 32) {
446 mask = 1 << key->hw_key_idx;
448 rt2x00usb_register_read(rt2x00dev, SEC_CSR2, ®);
449 if (crypto->cmd == SET_KEY)
451 else if (crypto->cmd == DISABLE_KEY)
453 rt2x00usb_register_write(rt2x00dev, SEC_CSR2, reg);
455 mask = 1 << (key->hw_key_idx - 32);
457 rt2x00usb_register_read(rt2x00dev, SEC_CSR3, ®);
458 if (crypto->cmd == SET_KEY)
460 else if (crypto->cmd == DISABLE_KEY)
462 rt2x00usb_register_write(rt2x00dev, SEC_CSR3, reg);
468 static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev,
469 const unsigned int filter_flags)
474 * Start configuration steps.
475 * Note that the version error will always be dropped
476 * and broadcast frames will always be accepted since
477 * there is no filter for it at this time.
479 rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®);
480 rt2x00_set_field32(®, TXRX_CSR0_DROP_CRC,
481 !(filter_flags & FIF_FCSFAIL));
482 rt2x00_set_field32(®, TXRX_CSR0_DROP_PHYSICAL,
483 !(filter_flags & FIF_PLCPFAIL));
484 rt2x00_set_field32(®, TXRX_CSR0_DROP_CONTROL,
485 !(filter_flags & (FIF_CONTROL | FIF_PSPOLL)));
486 rt2x00_set_field32(®, TXRX_CSR0_DROP_NOT_TO_ME,
487 !(filter_flags & FIF_PROMISC_IN_BSS));
488 rt2x00_set_field32(®, TXRX_CSR0_DROP_TO_DS,
489 !(filter_flags & FIF_PROMISC_IN_BSS) &&
490 !rt2x00dev->intf_ap_count);
491 rt2x00_set_field32(®, TXRX_CSR0_DROP_VERSION_ERROR, 1);
492 rt2x00_set_field32(®, TXRX_CSR0_DROP_MULTICAST,
493 !(filter_flags & FIF_ALLMULTI));
494 rt2x00_set_field32(®, TXRX_CSR0_DROP_BROADCAST, 0);
495 rt2x00_set_field32(®, TXRX_CSR0_DROP_ACK_CTS,
496 !(filter_flags & FIF_CONTROL));
497 rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
500 static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev,
501 struct rt2x00_intf *intf,
502 struct rt2x00intf_conf *conf,
503 const unsigned int flags)
507 if (flags & CONFIG_UPDATE_TYPE) {
509 * Enable synchronisation.
511 rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®);
512 rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, conf->sync);
513 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
516 if (flags & CONFIG_UPDATE_MAC) {
517 reg = le32_to_cpu(conf->mac[1]);
518 rt2x00_set_field32(®, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
519 conf->mac[1] = cpu_to_le32(reg);
521 rt2x00usb_register_multiwrite(rt2x00dev, MAC_CSR2,
522 conf->mac, sizeof(conf->mac));
525 if (flags & CONFIG_UPDATE_BSSID) {
526 reg = le32_to_cpu(conf->bssid[1]);
527 rt2x00_set_field32(®, MAC_CSR5_BSS_ID_MASK, 3);
528 conf->bssid[1] = cpu_to_le32(reg);
530 rt2x00usb_register_multiwrite(rt2x00dev, MAC_CSR4,
531 conf->bssid, sizeof(conf->bssid));
535 static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev,
536 struct rt2x00lib_erp *erp,
541 rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®);
542 rt2x00_set_field32(®, TXRX_CSR0_RX_ACK_TIMEOUT, 0x32);
543 rt2x00_set_field32(®, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
544 rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
546 if (changed & BSS_CHANGED_ERP_PREAMBLE) {
547 rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, ®);
548 rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
549 rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE,
550 !!erp->short_preamble);
551 rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg);
554 if (changed & BSS_CHANGED_BASIC_RATES)
555 rt2x00usb_register_write(rt2x00dev, TXRX_CSR5,
558 if (changed & BSS_CHANGED_BEACON_INT) {
559 rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®);
560 rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL,
561 erp->beacon_int * 16);
562 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
565 if (changed & BSS_CHANGED_ERP_SLOT) {
566 rt2x00usb_register_read(rt2x00dev, MAC_CSR9, ®);
567 rt2x00_set_field32(®, MAC_CSR9_SLOT_TIME, erp->slot_time);
568 rt2x00usb_register_write(rt2x00dev, MAC_CSR9, reg);
570 rt2x00usb_register_read(rt2x00dev, MAC_CSR8, ®);
571 rt2x00_set_field32(®, MAC_CSR8_SIFS, erp->sifs);
572 rt2x00_set_field32(®, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3);
573 rt2x00_set_field32(®, MAC_CSR8_EIFS, erp->eifs);
574 rt2x00usb_register_write(rt2x00dev, MAC_CSR8, reg);
578 static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
579 struct antenna_setup *ant)
586 rt73usb_bbp_read(rt2x00dev, 3, &r3);
587 rt73usb_bbp_read(rt2x00dev, 4, &r4);
588 rt73usb_bbp_read(rt2x00dev, 77, &r77);
590 rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
593 * Configure the RX antenna.
596 case ANTENNA_HW_DIVERSITY:
597 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
598 temp = !test_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags)
599 && (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ);
600 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, temp);
603 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
604 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
605 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
606 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
608 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
612 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
613 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
614 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
615 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
617 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
621 rt73usb_bbp_write(rt2x00dev, 77, r77);
622 rt73usb_bbp_write(rt2x00dev, 3, r3);
623 rt73usb_bbp_write(rt2x00dev, 4, r4);
626 static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
627 struct antenna_setup *ant)
633 rt73usb_bbp_read(rt2x00dev, 3, &r3);
634 rt73usb_bbp_read(rt2x00dev, 4, &r4);
635 rt73usb_bbp_read(rt2x00dev, 77, &r77);
637 rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
638 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
639 !test_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags));
642 * Configure the RX antenna.
645 case ANTENNA_HW_DIVERSITY:
646 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
649 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
650 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
654 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
655 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
659 rt73usb_bbp_write(rt2x00dev, 77, r77);
660 rt73usb_bbp_write(rt2x00dev, 3, r3);
661 rt73usb_bbp_write(rt2x00dev, 4, r4);
667 * value[0] -> non-LNA
673 static const struct antenna_sel antenna_sel_a[] = {
674 { 96, { 0x58, 0x78 } },
675 { 104, { 0x38, 0x48 } },
676 { 75, { 0xfe, 0x80 } },
677 { 86, { 0xfe, 0x80 } },
678 { 88, { 0xfe, 0x80 } },
679 { 35, { 0x60, 0x60 } },
680 { 97, { 0x58, 0x58 } },
681 { 98, { 0x58, 0x58 } },
684 static const struct antenna_sel antenna_sel_bg[] = {
685 { 96, { 0x48, 0x68 } },
686 { 104, { 0x2c, 0x3c } },
687 { 75, { 0xfe, 0x80 } },
688 { 86, { 0xfe, 0x80 } },
689 { 88, { 0xfe, 0x80 } },
690 { 35, { 0x50, 0x50 } },
691 { 97, { 0x48, 0x48 } },
692 { 98, { 0x48, 0x48 } },
695 static void rt73usb_config_ant(struct rt2x00_dev *rt2x00dev,
696 struct antenna_setup *ant)
698 const struct antenna_sel *sel;
704 * We should never come here because rt2x00lib is supposed
705 * to catch this and send us the correct antenna explicitely.
707 BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
708 ant->tx == ANTENNA_SW_DIVERSITY);
710 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
712 lna = test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags);
714 sel = antenna_sel_bg;
715 lna = test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags);
718 for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
719 rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
721 rt2x00usb_register_read(rt2x00dev, PHY_CSR0, ®);
723 rt2x00_set_field32(®, PHY_CSR0_PA_PE_BG,
724 (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ));
725 rt2x00_set_field32(®, PHY_CSR0_PA_PE_A,
726 (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ));
728 rt2x00usb_register_write(rt2x00dev, PHY_CSR0, reg);
730 if (rt2x00_rf(rt2x00dev, RF5226) || rt2x00_rf(rt2x00dev, RF5225))
731 rt73usb_config_antenna_5x(rt2x00dev, ant);
732 else if (rt2x00_rf(rt2x00dev, RF2528) || rt2x00_rf(rt2x00dev, RF2527))
733 rt73usb_config_antenna_2x(rt2x00dev, ant);
736 static void rt73usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
737 struct rt2x00lib_conf *libconf)
742 if (libconf->conf->channel->band == IEEE80211_BAND_2GHZ) {
743 if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags))
746 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
747 lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
749 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
750 lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
753 rt2x00dev->lna_gain = lna_gain;
756 static void rt73usb_config_channel(struct rt2x00_dev *rt2x00dev,
757 struct rf_channel *rf, const int txpower)
763 rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
764 rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
766 smart = !(rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF2527));
768 rt73usb_bbp_read(rt2x00dev, 3, &r3);
769 rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
770 rt73usb_bbp_write(rt2x00dev, 3, r3);
773 if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94))
774 r94 += txpower - MAX_TXPOWER;
775 else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94))
777 rt73usb_bbp_write(rt2x00dev, 94, r94);
779 rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
780 rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
781 rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
782 rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
784 rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
785 rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
786 rt73usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
787 rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
789 rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
790 rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
791 rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
792 rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
797 static void rt73usb_config_txpower(struct rt2x00_dev *rt2x00dev,
800 struct rf_channel rf;
802 rt2x00_rf_read(rt2x00dev, 1, &rf.rf1);
803 rt2x00_rf_read(rt2x00dev, 2, &rf.rf2);
804 rt2x00_rf_read(rt2x00dev, 3, &rf.rf3);
805 rt2x00_rf_read(rt2x00dev, 4, &rf.rf4);
807 rt73usb_config_channel(rt2x00dev, &rf, txpower);
810 static void rt73usb_config_retry_limit(struct rt2x00_dev *rt2x00dev,
811 struct rt2x00lib_conf *libconf)
815 rt2x00usb_register_read(rt2x00dev, TXRX_CSR4, ®);
816 rt2x00_set_field32(®, TXRX_CSR4_OFDM_TX_RATE_DOWN, 1);
817 rt2x00_set_field32(®, TXRX_CSR4_OFDM_TX_RATE_STEP, 0);
818 rt2x00_set_field32(®, TXRX_CSR4_OFDM_TX_FALLBACK_CCK, 0);
819 rt2x00_set_field32(®, TXRX_CSR4_LONG_RETRY_LIMIT,
820 libconf->conf->long_frame_max_tx_count);
821 rt2x00_set_field32(®, TXRX_CSR4_SHORT_RETRY_LIMIT,
822 libconf->conf->short_frame_max_tx_count);
823 rt2x00usb_register_write(rt2x00dev, TXRX_CSR4, reg);
826 static void rt73usb_config_ps(struct rt2x00_dev *rt2x00dev,
827 struct rt2x00lib_conf *libconf)
829 enum dev_state state =
830 (libconf->conf->flags & IEEE80211_CONF_PS) ?
831 STATE_SLEEP : STATE_AWAKE;
834 if (state == STATE_SLEEP) {
835 rt2x00usb_register_read(rt2x00dev, MAC_CSR11, ®);
836 rt2x00_set_field32(®, MAC_CSR11_DELAY_AFTER_TBCN,
837 rt2x00dev->beacon_int - 10);
838 rt2x00_set_field32(®, MAC_CSR11_TBCN_BEFORE_WAKEUP,
839 libconf->conf->listen_interval - 1);
840 rt2x00_set_field32(®, MAC_CSR11_WAKEUP_LATENCY, 5);
842 /* We must first disable autowake before it can be enabled */
843 rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 0);
844 rt2x00usb_register_write(rt2x00dev, MAC_CSR11, reg);
846 rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 1);
847 rt2x00usb_register_write(rt2x00dev, MAC_CSR11, reg);
849 rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
850 USB_MODE_SLEEP, REGISTER_TIMEOUT);
852 rt2x00usb_register_read(rt2x00dev, MAC_CSR11, ®);
853 rt2x00_set_field32(®, MAC_CSR11_DELAY_AFTER_TBCN, 0);
854 rt2x00_set_field32(®, MAC_CSR11_TBCN_BEFORE_WAKEUP, 0);
855 rt2x00_set_field32(®, MAC_CSR11_AUTOWAKE, 0);
856 rt2x00_set_field32(®, MAC_CSR11_WAKEUP_LATENCY, 0);
857 rt2x00usb_register_write(rt2x00dev, MAC_CSR11, reg);
859 rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
860 USB_MODE_WAKEUP, REGISTER_TIMEOUT);
864 static void rt73usb_config(struct rt2x00_dev *rt2x00dev,
865 struct rt2x00lib_conf *libconf,
866 const unsigned int flags)
868 /* Always recalculate LNA gain before changing configuration */
869 rt73usb_config_lna_gain(rt2x00dev, libconf);
871 if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
872 rt73usb_config_channel(rt2x00dev, &libconf->rf,
873 libconf->conf->power_level);
874 if ((flags & IEEE80211_CONF_CHANGE_POWER) &&
875 !(flags & IEEE80211_CONF_CHANGE_CHANNEL))
876 rt73usb_config_txpower(rt2x00dev, libconf->conf->power_level);
877 if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
878 rt73usb_config_retry_limit(rt2x00dev, libconf);
879 if (flags & IEEE80211_CONF_CHANGE_PS)
880 rt73usb_config_ps(rt2x00dev, libconf);
886 static void rt73usb_link_stats(struct rt2x00_dev *rt2x00dev,
887 struct link_qual *qual)
892 * Update FCS error count from register.
894 rt2x00usb_register_read(rt2x00dev, STA_CSR0, ®);
895 qual->rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR);
898 * Update False CCA count from register.
900 rt2x00usb_register_read(rt2x00dev, STA_CSR1, ®);
901 qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR);
904 static inline void rt73usb_set_vgc(struct rt2x00_dev *rt2x00dev,
905 struct link_qual *qual, u8 vgc_level)
907 if (qual->vgc_level != vgc_level) {
908 rt73usb_bbp_write(rt2x00dev, 17, vgc_level);
909 qual->vgc_level = vgc_level;
910 qual->vgc_level_reg = vgc_level;
914 static void rt73usb_reset_tuner(struct rt2x00_dev *rt2x00dev,
915 struct link_qual *qual)
917 rt73usb_set_vgc(rt2x00dev, qual, 0x20);
920 static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev,
921 struct link_qual *qual, const u32 count)
927 * Determine r17 bounds.
929 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
933 if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags)) {
938 if (qual->rssi > -82) {
941 } else if (qual->rssi > -84) {
949 if (test_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags)) {
956 * If we are not associated, we should go straight to the
957 * dynamic CCA tuning.
959 if (!rt2x00dev->intf_associated)
960 goto dynamic_cca_tune;
963 * Special big-R17 for very short distance
965 if (qual->rssi > -35) {
966 rt73usb_set_vgc(rt2x00dev, qual, 0x60);
971 * Special big-R17 for short distance
973 if (qual->rssi >= -58) {
974 rt73usb_set_vgc(rt2x00dev, qual, up_bound);
979 * Special big-R17 for middle-short distance
981 if (qual->rssi >= -66) {
982 rt73usb_set_vgc(rt2x00dev, qual, low_bound + 0x10);
987 * Special mid-R17 for middle distance
989 if (qual->rssi >= -74) {
990 rt73usb_set_vgc(rt2x00dev, qual, low_bound + 0x08);
995 * Special case: Change up_bound based on the rssi.
996 * Lower up_bound when rssi is weaker then -74 dBm.
998 up_bound -= 2 * (-74 - qual->rssi);
999 if (low_bound > up_bound)
1000 up_bound = low_bound;
1002 if (qual->vgc_level > up_bound) {
1003 rt73usb_set_vgc(rt2x00dev, qual, up_bound);
1010 * r17 does not yet exceed upper limit, continue and base
1011 * the r17 tuning on the false CCA count.
1013 if ((qual->false_cca > 512) && (qual->vgc_level < up_bound))
1014 rt73usb_set_vgc(rt2x00dev, qual,
1015 min_t(u8, qual->vgc_level + 4, up_bound));
1016 else if ((qual->false_cca < 100) && (qual->vgc_level > low_bound))
1017 rt73usb_set_vgc(rt2x00dev, qual,
1018 max_t(u8, qual->vgc_level - 4, low_bound));
1024 static void rt73usb_start_queue(struct data_queue *queue)
1026 struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
1029 switch (queue->qid) {
1031 rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®);
1032 rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 0);
1033 rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
1036 rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®);
1037 rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1);
1038 rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 1);
1039 rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1);
1040 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
1047 static void rt73usb_stop_queue(struct data_queue *queue)
1049 struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
1052 switch (queue->qid) {
1054 rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®);
1055 rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 1);
1056 rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
1059 rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®);
1060 rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0);
1061 rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0);
1062 rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0);
1063 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
1071 * Firmware functions
1073 static char *rt73usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
1075 return FIRMWARE_RT2571;
1078 static int rt73usb_check_firmware(struct rt2x00_dev *rt2x00dev,
1079 const u8 *data, const size_t len)
1085 * Only support 2kb firmware files.
1088 return FW_BAD_LENGTH;
1091 * The last 2 bytes in the firmware array are the crc checksum itself,
1092 * this means that we should never pass those 2 bytes to the crc
1095 fw_crc = (data[len - 2] << 8 | data[len - 1]);
1098 * Use the crc itu-t algorithm.
1100 crc = crc_itu_t(0, data, len - 2);
1101 crc = crc_itu_t_byte(crc, 0);
1102 crc = crc_itu_t_byte(crc, 0);
1104 return (fw_crc == crc) ? FW_OK : FW_BAD_CRC;
1107 static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev,
1108 const u8 *data, const size_t len)
1115 * Wait for stable hardware.
1117 for (i = 0; i < 100; i++) {
1118 rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®);
1125 ERROR(rt2x00dev, "Unstable hardware.\n");
1130 * Write firmware to device.
1132 rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, data, len);
1135 * Send firmware request to device to load firmware,
1136 * we need to specify a long timeout time.
1138 status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
1139 0, USB_MODE_FIRMWARE,
1140 REGISTER_TIMEOUT_FIRMWARE);
1142 ERROR(rt2x00dev, "Failed to write Firmware to device.\n");
1150 * Initialization functions.
1152 static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev)
1156 rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, ®);
1157 rt2x00_set_field32(®, TXRX_CSR0_AUTO_TX_SEQ, 1);
1158 rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, 0);
1159 rt2x00_set_field32(®, TXRX_CSR0_TX_WITHOUT_WAITING, 0);
1160 rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
1162 rt2x00usb_register_read(rt2x00dev, TXRX_CSR1, ®);
1163 rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */
1164 rt2x00_set_field32(®, TXRX_CSR1_BBP_ID0_VALID, 1);
1165 rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1, 30); /* Rssi */
1166 rt2x00_set_field32(®, TXRX_CSR1_BBP_ID1_VALID, 1);
1167 rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */
1168 rt2x00_set_field32(®, TXRX_CSR1_BBP_ID2_VALID, 1);
1169 rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3, 30); /* Rssi */
1170 rt2x00_set_field32(®, TXRX_CSR1_BBP_ID3_VALID, 1);
1171 rt2x00usb_register_write(rt2x00dev, TXRX_CSR1, reg);
1174 * CCK TXD BBP registers
1176 rt2x00usb_register_read(rt2x00dev, TXRX_CSR2, ®);
1177 rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0, 13);
1178 rt2x00_set_field32(®, TXRX_CSR2_BBP_ID0_VALID, 1);
1179 rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1, 12);
1180 rt2x00_set_field32(®, TXRX_CSR2_BBP_ID1_VALID, 1);
1181 rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2, 11);
1182 rt2x00_set_field32(®, TXRX_CSR2_BBP_ID2_VALID, 1);
1183 rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3, 10);
1184 rt2x00_set_field32(®, TXRX_CSR2_BBP_ID3_VALID, 1);
1185 rt2x00usb_register_write(rt2x00dev, TXRX_CSR2, reg);
1188 * OFDM TXD BBP registers
1190 rt2x00usb_register_read(rt2x00dev, TXRX_CSR3, ®);
1191 rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0, 7);
1192 rt2x00_set_field32(®, TXRX_CSR3_BBP_ID0_VALID, 1);
1193 rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1, 6);
1194 rt2x00_set_field32(®, TXRX_CSR3_BBP_ID1_VALID, 1);
1195 rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2, 5);
1196 rt2x00_set_field32(®, TXRX_CSR3_BBP_ID2_VALID, 1);
1197 rt2x00usb_register_write(rt2x00dev, TXRX_CSR3, reg);
1199 rt2x00usb_register_read(rt2x00dev, TXRX_CSR7, ®);
1200 rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_6MBS, 59);
1201 rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_9MBS, 53);
1202 rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_12MBS, 49);
1203 rt2x00_set_field32(®, TXRX_CSR7_ACK_CTS_18MBS, 46);
1204 rt2x00usb_register_write(rt2x00dev, TXRX_CSR7, reg);
1206 rt2x00usb_register_read(rt2x00dev, TXRX_CSR8, ®);
1207 rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_24MBS, 44);
1208 rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_36MBS, 42);
1209 rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_48MBS, 42);
1210 rt2x00_set_field32(®, TXRX_CSR8_ACK_CTS_54MBS, 42);
1211 rt2x00usb_register_write(rt2x00dev, TXRX_CSR8, reg);
1213 rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®);
1214 rt2x00_set_field32(®, TXRX_CSR9_BEACON_INTERVAL, 0);
1215 rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0);
1216 rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, 0);
1217 rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0);
1218 rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0);
1219 rt2x00_set_field32(®, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0);
1220 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
1222 rt2x00usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
1224 rt2x00usb_register_read(rt2x00dev, MAC_CSR6, ®);
1225 rt2x00_set_field32(®, MAC_CSR6_MAX_FRAME_UNIT, 0xfff);
1226 rt2x00usb_register_write(rt2x00dev, MAC_CSR6, reg);
1228 rt2x00usb_register_write(rt2x00dev, MAC_CSR10, 0x00000718);
1230 if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
1233 rt2x00usb_register_write(rt2x00dev, MAC_CSR13, 0x00007f00);
1236 * Invalidate all Shared Keys (SEC_CSR0),
1237 * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
1239 rt2x00usb_register_write(rt2x00dev, SEC_CSR0, 0x00000000);
1240 rt2x00usb_register_write(rt2x00dev, SEC_CSR1, 0x00000000);
1241 rt2x00usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000);
1244 if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF2527))
1245 rt2x00_set_field32(®, PHY_CSR1_RF_RPI, 1);
1246 rt2x00usb_register_write(rt2x00dev, PHY_CSR1, reg);
1248 rt2x00usb_register_write(rt2x00dev, PHY_CSR5, 0x00040a06);
1249 rt2x00usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
1250 rt2x00usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408);
1252 rt2x00usb_register_read(rt2x00dev, MAC_CSR9, ®);
1253 rt2x00_set_field32(®, MAC_CSR9_CW_SELECT, 0);
1254 rt2x00usb_register_write(rt2x00dev, MAC_CSR9, reg);
1258 * For the Beacon base registers we only need to clear
1259 * the first byte since that byte contains the VALID and OWNER
1260 * bits which (when set to 0) will invalidate the entire beacon.
1262 rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
1263 rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
1264 rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
1265 rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
1268 * We must clear the error counters.
1269 * These registers are cleared on read,
1270 * so we may pass a useless variable to store the value.
1272 rt2x00usb_register_read(rt2x00dev, STA_CSR0, ®);
1273 rt2x00usb_register_read(rt2x00dev, STA_CSR1, ®);
1274 rt2x00usb_register_read(rt2x00dev, STA_CSR2, ®);
1277 * Reset MAC and BBP registers.
1279 rt2x00usb_register_read(rt2x00dev, MAC_CSR1, ®);
1280 rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 1);
1281 rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 1);
1282 rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg);
1284 rt2x00usb_register_read(rt2x00dev, MAC_CSR1, ®);
1285 rt2x00_set_field32(®, MAC_CSR1_SOFT_RESET, 0);
1286 rt2x00_set_field32(®, MAC_CSR1_BBP_RESET, 0);
1287 rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg);
1289 rt2x00usb_register_read(rt2x00dev, MAC_CSR1, ®);
1290 rt2x00_set_field32(®, MAC_CSR1_HOST_READY, 1);
1291 rt2x00usb_register_write(rt2x00dev, MAC_CSR1, reg);
1296 static int rt73usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
1301 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1302 rt73usb_bbp_read(rt2x00dev, 0, &value);
1303 if ((value != 0xff) && (value != 0x00))
1305 udelay(REGISTER_BUSY_DELAY);
1308 ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
1312 static int rt73usb_init_bbp(struct rt2x00_dev *rt2x00dev)
1319 if (unlikely(rt73usb_wait_bbp_ready(rt2x00dev)))
1322 rt73usb_bbp_write(rt2x00dev, 3, 0x80);
1323 rt73usb_bbp_write(rt2x00dev, 15, 0x30);
1324 rt73usb_bbp_write(rt2x00dev, 21, 0xc8);
1325 rt73usb_bbp_write(rt2x00dev, 22, 0x38);
1326 rt73usb_bbp_write(rt2x00dev, 23, 0x06);
1327 rt73usb_bbp_write(rt2x00dev, 24, 0xfe);
1328 rt73usb_bbp_write(rt2x00dev, 25, 0x0a);
1329 rt73usb_bbp_write(rt2x00dev, 26, 0x0d);
1330 rt73usb_bbp_write(rt2x00dev, 32, 0x0b);
1331 rt73usb_bbp_write(rt2x00dev, 34, 0x12);
1332 rt73usb_bbp_write(rt2x00dev, 37, 0x07);
1333 rt73usb_bbp_write(rt2x00dev, 39, 0xf8);
1334 rt73usb_bbp_write(rt2x00dev, 41, 0x60);
1335 rt73usb_bbp_write(rt2x00dev, 53, 0x10);
1336 rt73usb_bbp_write(rt2x00dev, 54, 0x18);
1337 rt73usb_bbp_write(rt2x00dev, 60, 0x10);
1338 rt73usb_bbp_write(rt2x00dev, 61, 0x04);
1339 rt73usb_bbp_write(rt2x00dev, 62, 0x04);
1340 rt73usb_bbp_write(rt2x00dev, 75, 0xfe);
1341 rt73usb_bbp_write(rt2x00dev, 86, 0xfe);
1342 rt73usb_bbp_write(rt2x00dev, 88, 0xfe);
1343 rt73usb_bbp_write(rt2x00dev, 90, 0x0f);
1344 rt73usb_bbp_write(rt2x00dev, 99, 0x00);
1345 rt73usb_bbp_write(rt2x00dev, 102, 0x16);
1346 rt73usb_bbp_write(rt2x00dev, 107, 0x04);
1348 for (i = 0; i < EEPROM_BBP_SIZE; i++) {
1349 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
1351 if (eeprom != 0xffff && eeprom != 0x0000) {
1352 reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
1353 value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
1354 rt73usb_bbp_write(rt2x00dev, reg_id, value);
1362 * Device state switch handlers.
1364 static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev)
1367 * Initialize all registers.
1369 if (unlikely(rt73usb_init_registers(rt2x00dev) ||
1370 rt73usb_init_bbp(rt2x00dev)))
1376 static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev)
1378 rt2x00usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
1381 * Disable synchronisation.
1383 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, 0);
1385 rt2x00usb_disable_radio(rt2x00dev);
1388 static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
1394 put_to_sleep = (state != STATE_AWAKE);
1396 rt2x00usb_register_read(rt2x00dev, MAC_CSR12, ®);
1397 rt2x00_set_field32(®, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep);
1398 rt2x00_set_field32(®, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep);
1399 rt2x00usb_register_write(rt2x00dev, MAC_CSR12, reg);
1402 * Device is not guaranteed to be in the requested state yet.
1403 * We must wait until the register indicates that the
1404 * device has entered the correct state.
1406 for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1407 rt2x00usb_register_read(rt2x00dev, MAC_CSR12, ®2);
1408 state = rt2x00_get_field32(reg2, MAC_CSR12_BBP_CURRENT_STATE);
1409 if (state == !put_to_sleep)
1411 rt2x00usb_register_write(rt2x00dev, MAC_CSR12, reg);
1418 static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
1419 enum dev_state state)
1424 case STATE_RADIO_ON:
1425 retval = rt73usb_enable_radio(rt2x00dev);
1427 case STATE_RADIO_OFF:
1428 rt73usb_disable_radio(rt2x00dev);
1430 case STATE_RADIO_IRQ_ON:
1431 case STATE_RADIO_IRQ_OFF:
1432 /* No support, but no error either */
1434 case STATE_DEEP_SLEEP:
1438 retval = rt73usb_set_state(rt2x00dev, state);
1445 if (unlikely(retval))
1446 ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
1453 * TX descriptor initialization
1455 static void rt73usb_write_tx_desc(struct queue_entry *entry,
1456 struct txentry_desc *txdesc)
1458 struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1459 __le32 *txd = (__le32 *) entry->skb->data;
1463 * Start writing the descriptor words.
1465 rt2x00_desc_read(txd, 0, &word);
1466 rt2x00_set_field32(&word, TXD_W0_BURST,
1467 test_bit(ENTRY_TXD_BURST, &txdesc->flags));
1468 rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1469 rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1470 test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
1471 rt2x00_set_field32(&word, TXD_W0_ACK,
1472 test_bit(ENTRY_TXD_ACK, &txdesc->flags));
1473 rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1474 test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
1475 rt2x00_set_field32(&word, TXD_W0_OFDM,
1476 (txdesc->rate_mode == RATE_MODE_OFDM));
1477 rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->u.plcp.ifs);
1478 rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1479 test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
1480 rt2x00_set_field32(&word, TXD_W0_TKIP_MIC,
1481 test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags));
1482 rt2x00_set_field32(&word, TXD_W0_KEY_TABLE,
1483 test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags));
1484 rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx);
1485 rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length);
1486 rt2x00_set_field32(&word, TXD_W0_BURST2,
1487 test_bit(ENTRY_TXD_BURST, &txdesc->flags));
1488 rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
1489 rt2x00_desc_write(txd, 0, word);
1491 rt2x00_desc_read(txd, 1, &word);
1492 rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, entry->queue->qid);
1493 rt2x00_set_field32(&word, TXD_W1_AIFSN, entry->queue->aifs);
1494 rt2x00_set_field32(&word, TXD_W1_CWMIN, entry->queue->cw_min);
1495 rt2x00_set_field32(&word, TXD_W1_CWMAX, entry->queue->cw_max);
1496 rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
1497 rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
1498 test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
1499 rt2x00_desc_write(txd, 1, word);
1501 rt2x00_desc_read(txd, 2, &word);
1502 rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->u.plcp.signal);
1503 rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->u.plcp.service);
1504 rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW,
1505 txdesc->u.plcp.length_low);
1506 rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH,
1507 txdesc->u.plcp.length_high);
1508 rt2x00_desc_write(txd, 2, word);
1510 if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
1511 _rt2x00_desc_write(txd, 3, skbdesc->iv[0]);
1512 _rt2x00_desc_write(txd, 4, skbdesc->iv[1]);
1515 rt2x00_desc_read(txd, 5, &word);
1516 rt2x00_set_field32(&word, TXD_W5_TX_POWER,
1517 TXPOWER_TO_DEV(entry->queue->rt2x00dev->tx_power));
1518 rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
1519 rt2x00_desc_write(txd, 5, word);
1522 * Register descriptor details in skb frame descriptor.
1524 skbdesc->flags |= SKBDESC_DESC_IN_SKB;
1525 skbdesc->desc = txd;
1526 skbdesc->desc_len = TXD_DESC_SIZE;
1530 * TX data initialization
1532 static void rt73usb_write_beacon(struct queue_entry *entry,
1533 struct txentry_desc *txdesc)
1535 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1536 unsigned int beacon_base;
1537 unsigned int padding_len;
1541 * Disable beaconing while we are reloading the beacon data,
1542 * otherwise we might be sending out invalid data.
1544 rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®);
1546 rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0);
1547 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
1550 * Add space for the descriptor in front of the skb.
1552 skb_push(entry->skb, TXD_DESC_SIZE);
1553 memset(entry->skb->data, 0, TXD_DESC_SIZE);
1556 * Write the TX descriptor for the beacon.
1558 rt73usb_write_tx_desc(entry, txdesc);
1561 * Dump beacon to userspace through debugfs.
1563 rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
1566 * Write entire beacon with descriptor and padding to register.
1568 padding_len = roundup(entry->skb->len, 4) - entry->skb->len;
1569 if (padding_len && skb_pad(entry->skb, padding_len)) {
1570 ERROR(rt2x00dev, "Failure padding beacon, aborting\n");
1571 /* skb freed by skb_pad() on failure */
1573 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, orig_reg);
1577 beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
1578 rt2x00usb_register_multiwrite(rt2x00dev, beacon_base, entry->skb->data,
1579 entry->skb->len + padding_len);
1582 * Enable beaconing again.
1584 * For Wi-Fi faily generated beacons between participating stations.
1585 * Set TBTT phase adaptive adjustment step to 8us (default 16us)
1587 rt2x00usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
1589 rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1);
1590 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
1593 * Clean up the beacon skb.
1595 dev_kfree_skb(entry->skb);
1599 static void rt73usb_clear_beacon(struct queue_entry *entry)
1601 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1602 unsigned int beacon_base;
1606 * Disable beaconing while we are reloading the beacon data,
1607 * otherwise we might be sending out invalid data.
1609 rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, ®);
1610 rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0);
1611 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
1616 beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
1617 rt2x00usb_register_write(rt2x00dev, beacon_base, 0);
1620 * Enable beaconing again.
1622 rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 1);
1623 rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
1626 static int rt73usb_get_tx_data_len(struct queue_entry *entry)
1631 * The length _must_ be a multiple of 4,
1632 * but it must _not_ be a multiple of the USB packet size.
1634 length = roundup(entry->skb->len, 4);
1635 length += (4 * !(length % entry->queue->usb_maxpacket));
1641 * RX control handlers
1643 static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
1645 u8 offset = rt2x00dev->lna_gain;
1648 lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
1663 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
1664 if (test_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags)) {
1665 if (lna == 3 || lna == 2)
1675 return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
1678 static void rt73usb_fill_rxdone(struct queue_entry *entry,
1679 struct rxdone_entry_desc *rxdesc)
1681 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1682 struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1683 __le32 *rxd = (__le32 *)entry->skb->data;
1688 * Copy descriptor to the skbdesc->desc buffer, making it safe from moving of
1689 * frame data in rt2x00usb.
1691 memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
1692 rxd = (__le32 *)skbdesc->desc;
1695 * It is now safe to read the descriptor on all architectures.
1697 rt2x00_desc_read(rxd, 0, &word0);
1698 rt2x00_desc_read(rxd, 1, &word1);
1700 if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1701 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
1703 rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
1704 rxdesc->cipher_status = rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
1706 if (rxdesc->cipher != CIPHER_NONE) {
1707 _rt2x00_desc_read(rxd, 2, &rxdesc->iv[0]);
1708 _rt2x00_desc_read(rxd, 3, &rxdesc->iv[1]);
1709 rxdesc->dev_flags |= RXDONE_CRYPTO_IV;
1711 _rt2x00_desc_read(rxd, 4, &rxdesc->icv);
1712 rxdesc->dev_flags |= RXDONE_CRYPTO_ICV;
1715 * Hardware has stripped IV/EIV data from 802.11 frame during
1716 * decryption. It has provided the data separately but rt2x00lib
1717 * should decide if it should be reinserted.
1719 rxdesc->flags |= RX_FLAG_IV_STRIPPED;
1722 * The hardware has already checked the Michael Mic and has
1723 * stripped it from the frame. Signal this to mac80211.
1725 rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
1727 if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
1728 rxdesc->flags |= RX_FLAG_DECRYPTED;
1729 else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
1730 rxdesc->flags |= RX_FLAG_MMIC_ERROR;
1734 * Obtain the status about this packet.
1735 * When frame was received with an OFDM bitrate,
1736 * the signal is the PLCP value. If it was received with
1737 * a CCK bitrate the signal is the rate in 100kbit/s.
1739 rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
1740 rxdesc->rssi = rt73usb_agc_to_rssi(rt2x00dev, word1);
1741 rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1743 if (rt2x00_get_field32(word0, RXD_W0_OFDM))
1744 rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
1746 rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
1747 if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
1748 rxdesc->dev_flags |= RXDONE_MY_BSS;
1751 * Set skb pointers, and update frame information.
1753 skb_pull(entry->skb, entry->queue->desc_size);
1754 skb_trim(entry->skb, rxdesc->size);
1758 * Device probe functions.
1760 static int rt73usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1766 rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
1769 * Start validation of the data that has been read.
1771 mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1772 if (!is_valid_ether_addr(mac)) {
1773 random_ether_addr(mac);
1774 EEPROM(rt2x00dev, "MAC: %pM\n", mac);
1777 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1778 if (word == 0xffff) {
1779 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1780 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
1782 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
1784 rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0);
1785 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1786 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1787 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5226);
1788 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1789 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1792 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1793 if (word == 0xffff) {
1794 rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA, 0);
1795 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1796 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1799 rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word);
1800 if (word == 0xffff) {
1801 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_G, 0);
1802 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_A, 0);
1803 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_ACT, 0);
1804 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_0, 0);
1805 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_1, 0);
1806 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_2, 0);
1807 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_3, 0);
1808 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_4, 0);
1809 rt2x00_set_field16(&word, EEPROM_LED_LED_MODE,
1811 rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word);
1812 EEPROM(rt2x00dev, "Led: 0x%04x\n", word);
1815 rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
1816 if (word == 0xffff) {
1817 rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
1818 rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0);
1819 rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
1820 EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
1823 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word);
1824 if (word == 0xffff) {
1825 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
1826 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
1827 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
1828 EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
1830 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1);
1831 if (value < -10 || value > 10)
1832 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
1833 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2);
1834 if (value < -10 || value > 10)
1835 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
1836 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
1839 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word);
1840 if (word == 0xffff) {
1841 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
1842 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
1843 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
1844 EEPROM(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word);
1846 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
1847 if (value < -10 || value > 10)
1848 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
1849 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2);
1850 if (value < -10 || value > 10)
1851 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
1852 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
1858 static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
1865 * Read EEPROM word for configuration.
1867 rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1870 * Identify RF chipset.
1872 value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1873 rt2x00usb_register_read(rt2x00dev, MAC_CSR0, ®);
1874 rt2x00_set_chip(rt2x00dev, rt2x00_get_field32(reg, MAC_CSR0_CHIPSET),
1875 value, rt2x00_get_field32(reg, MAC_CSR0_REVISION));
1877 if (!rt2x00_rt(rt2x00dev, RT2573) || (rt2x00_rev(rt2x00dev) == 0)) {
1878 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
1882 if (!rt2x00_rf(rt2x00dev, RF5226) &&
1883 !rt2x00_rf(rt2x00dev, RF2528) &&
1884 !rt2x00_rf(rt2x00dev, RF5225) &&
1885 !rt2x00_rf(rt2x00dev, RF2527)) {
1886 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1891 * Identify default antenna configuration.
1893 rt2x00dev->default_ant.tx =
1894 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1895 rt2x00dev->default_ant.rx =
1896 rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1899 * Read the Frame type.
1901 if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE))
1902 __set_bit(CAPABILITY_FRAME_TYPE, &rt2x00dev->cap_flags);
1905 * Detect if this device has an hardware controlled radio.
1907 if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
1908 __set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
1911 * Read frequency offset.
1913 rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
1914 rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
1917 * Read external LNA informations.
1919 rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1921 if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA)) {
1922 __set_bit(CAPABILITY_EXTERNAL_LNA_A, &rt2x00dev->cap_flags);
1923 __set_bit(CAPABILITY_EXTERNAL_LNA_BG, &rt2x00dev->cap_flags);
1927 * Store led settings, for correct led behaviour.
1929 #ifdef CONFIG_RT2X00_LIB_LEDS
1930 rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
1932 rt73usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
1933 rt73usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
1934 if (value == LED_MODE_SIGNAL_STRENGTH)
1935 rt73usb_init_led(rt2x00dev, &rt2x00dev->led_qual,
1938 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value);
1939 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0,
1940 rt2x00_get_field16(eeprom,
1941 EEPROM_LED_POLARITY_GPIO_0));
1942 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1,
1943 rt2x00_get_field16(eeprom,
1944 EEPROM_LED_POLARITY_GPIO_1));
1945 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2,
1946 rt2x00_get_field16(eeprom,
1947 EEPROM_LED_POLARITY_GPIO_2));
1948 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3,
1949 rt2x00_get_field16(eeprom,
1950 EEPROM_LED_POLARITY_GPIO_3));
1951 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4,
1952 rt2x00_get_field16(eeprom,
1953 EEPROM_LED_POLARITY_GPIO_4));
1954 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT,
1955 rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
1956 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG,
1957 rt2x00_get_field16(eeprom,
1958 EEPROM_LED_POLARITY_RDY_G));
1959 rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
1960 rt2x00_get_field16(eeprom,
1961 EEPROM_LED_POLARITY_RDY_A));
1962 #endif /* CONFIG_RT2X00_LIB_LEDS */
1968 * RF value list for RF2528
1971 static const struct rf_channel rf_vals_bg_2528[] = {
1972 { 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
1973 { 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
1974 { 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
1975 { 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
1976 { 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
1977 { 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
1978 { 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
1979 { 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
1980 { 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
1981 { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
1982 { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
1983 { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
1984 { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
1985 { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
1989 * RF value list for RF5226
1990 * Supports: 2.4 GHz & 5.2 GHz
1992 static const struct rf_channel rf_vals_5226[] = {
1993 { 1, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
1994 { 2, 0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
1995 { 3, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
1996 { 4, 0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
1997 { 5, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
1998 { 6, 0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
1999 { 7, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
2000 { 8, 0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
2001 { 9, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
2002 { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
2003 { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
2004 { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
2005 { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
2006 { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
2008 /* 802.11 UNI / HyperLan 2 */
2009 { 36, 0x00002c0c, 0x0000099a, 0x00098255, 0x000fea23 },
2010 { 40, 0x00002c0c, 0x000009a2, 0x00098255, 0x000fea03 },
2011 { 44, 0x00002c0c, 0x000009a6, 0x00098255, 0x000fea0b },
2012 { 48, 0x00002c0c, 0x000009aa, 0x00098255, 0x000fea13 },
2013 { 52, 0x00002c0c, 0x000009ae, 0x00098255, 0x000fea1b },
2014 { 56, 0x00002c0c, 0x000009b2, 0x00098255, 0x000fea23 },
2015 { 60, 0x00002c0c, 0x000009ba, 0x00098255, 0x000fea03 },
2016 { 64, 0x00002c0c, 0x000009be, 0x00098255, 0x000fea0b },
2018 /* 802.11 HyperLan 2 */
2019 { 100, 0x00002c0c, 0x00000a2a, 0x000b8255, 0x000fea03 },
2020 { 104, 0x00002c0c, 0x00000a2e, 0x000b8255, 0x000fea0b },
2021 { 108, 0x00002c0c, 0x00000a32, 0x000b8255, 0x000fea13 },
2022 { 112, 0x00002c0c, 0x00000a36, 0x000b8255, 0x000fea1b },
2023 { 116, 0x00002c0c, 0x00000a3a, 0x000b8255, 0x000fea23 },
2024 { 120, 0x00002c0c, 0x00000a82, 0x000b8255, 0x000fea03 },
2025 { 124, 0x00002c0c, 0x00000a86, 0x000b8255, 0x000fea0b },
2026 { 128, 0x00002c0c, 0x00000a8a, 0x000b8255, 0x000fea13 },
2027 { 132, 0x00002c0c, 0x00000a8e, 0x000b8255, 0x000fea1b },
2028 { 136, 0x00002c0c, 0x00000a92, 0x000b8255, 0x000fea23 },
2031 { 140, 0x00002c0c, 0x00000a9a, 0x000b8255, 0x000fea03 },
2032 { 149, 0x00002c0c, 0x00000aa2, 0x000b8255, 0x000fea1f },
2033 { 153, 0x00002c0c, 0x00000aa6, 0x000b8255, 0x000fea27 },
2034 { 157, 0x00002c0c, 0x00000aae, 0x000b8255, 0x000fea07 },
2035 { 161, 0x00002c0c, 0x00000ab2, 0x000b8255, 0x000fea0f },
2036 { 165, 0x00002c0c, 0x00000ab6, 0x000b8255, 0x000fea17 },
2038 /* MMAC(Japan)J52 ch 34,38,42,46 */
2039 { 34, 0x00002c0c, 0x0008099a, 0x000da255, 0x000d3a0b },
2040 { 38, 0x00002c0c, 0x0008099e, 0x000da255, 0x000d3a13 },
2041 { 42, 0x00002c0c, 0x000809a2, 0x000da255, 0x000d3a1b },
2042 { 46, 0x00002c0c, 0x000809a6, 0x000da255, 0x000d3a23 },
2046 * RF value list for RF5225 & RF2527
2047 * Supports: 2.4 GHz & 5.2 GHz
2049 static const struct rf_channel rf_vals_5225_2527[] = {
2050 { 1, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
2051 { 2, 0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
2052 { 3, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
2053 { 4, 0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
2054 { 5, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
2055 { 6, 0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
2056 { 7, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
2057 { 8, 0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
2058 { 9, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
2059 { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
2060 { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
2061 { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
2062 { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
2063 { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
2065 /* 802.11 UNI / HyperLan 2 */
2066 { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 },
2067 { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 },
2068 { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b },
2069 { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 },
2070 { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b },
2071 { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 },
2072 { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 },
2073 { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b },
2075 /* 802.11 HyperLan 2 */
2076 { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 },
2077 { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b },
2078 { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 },
2079 { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b },
2080 { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 },
2081 { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 },
2082 { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b },
2083 { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 },
2084 { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b },
2085 { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 },
2088 { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 },
2089 { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f },
2090 { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 },
2091 { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 },
2092 { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f },
2093 { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 },
2095 /* MMAC(Japan)J52 ch 34,38,42,46 */
2096 { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b },
2097 { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 },
2098 { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b },
2099 { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 },
2103 static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
2105 struct hw_mode_spec *spec = &rt2x00dev->spec;
2106 struct channel_info *info;
2111 * Initialize all hw fields.
2113 * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING unless we are
2114 * capable of sending the buffered frames out after the DTIM
2115 * transmission using rt2x00lib_beacondone. This will send out
2116 * multicast and broadcast traffic immediately instead of buffering it
2117 * infinitly and thus dropping it after some time.
2119 rt2x00dev->hw->flags =
2120 IEEE80211_HW_SIGNAL_DBM |
2121 IEEE80211_HW_SUPPORTS_PS |
2122 IEEE80211_HW_PS_NULLFUNC_STACK;
2124 SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
2125 SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
2126 rt2x00_eeprom_addr(rt2x00dev,
2127 EEPROM_MAC_ADDR_0));
2130 * Initialize hw_mode information.
2132 spec->supported_bands = SUPPORT_BAND_2GHZ;
2133 spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
2135 if (rt2x00_rf(rt2x00dev, RF2528)) {
2136 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
2137 spec->channels = rf_vals_bg_2528;
2138 } else if (rt2x00_rf(rt2x00dev, RF5226)) {
2139 spec->supported_bands |= SUPPORT_BAND_5GHZ;
2140 spec->num_channels = ARRAY_SIZE(rf_vals_5226);
2141 spec->channels = rf_vals_5226;
2142 } else if (rt2x00_rf(rt2x00dev, RF2527)) {
2143 spec->num_channels = 14;
2144 spec->channels = rf_vals_5225_2527;
2145 } else if (rt2x00_rf(rt2x00dev, RF5225)) {
2146 spec->supported_bands |= SUPPORT_BAND_5GHZ;
2147 spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527);
2148 spec->channels = rf_vals_5225_2527;
2152 * Create channel information array
2154 info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL);
2158 spec->channels_info = info;
2160 tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
2161 for (i = 0; i < 14; i++) {
2162 info[i].max_power = MAX_TXPOWER;
2163 info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
2166 if (spec->num_channels > 14) {
2167 tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
2168 for (i = 14; i < spec->num_channels; i++) {
2169 info[i].max_power = MAX_TXPOWER;
2170 info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
2177 static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
2182 * Allocate eeprom data.
2184 retval = rt73usb_validate_eeprom(rt2x00dev);
2188 retval = rt73usb_init_eeprom(rt2x00dev);
2193 * Initialize hw specifications.
2195 retval = rt73usb_probe_hw_mode(rt2x00dev);
2200 * This device has multiple filters for control frames,
2201 * but has no a separate filter for PS Poll frames.
2203 __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
2206 * This device requires firmware.
2208 __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
2209 if (!modparam_nohwcrypt)
2210 __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
2211 __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
2212 __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
2215 * Set the rssi offset.
2217 rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
2223 * IEEE80211 stack callback functions.
2225 static int rt73usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
2226 const struct ieee80211_tx_queue_params *params)
2228 struct rt2x00_dev *rt2x00dev = hw->priv;
2229 struct data_queue *queue;
2230 struct rt2x00_field32 field;
2236 * First pass the configuration through rt2x00lib, that will
2237 * update the queue settings and validate the input. After that
2238 * we are free to update the registers based on the value
2239 * in the queue parameter.
2241 retval = rt2x00mac_conf_tx(hw, queue_idx, params);
2246 * We only need to perform additional register initialization
2252 queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx);
2254 /* Update WMM TXOP register */
2255 offset = AC_TXOP_CSR0 + (sizeof(u32) * (!!(queue_idx & 2)));
2256 field.bit_offset = (queue_idx & 1) * 16;
2257 field.bit_mask = 0xffff << field.bit_offset;
2259 rt2x00usb_register_read(rt2x00dev, offset, ®);
2260 rt2x00_set_field32(®, field, queue->txop);
2261 rt2x00usb_register_write(rt2x00dev, offset, reg);
2263 /* Update WMM registers */
2264 field.bit_offset = queue_idx * 4;
2265 field.bit_mask = 0xf << field.bit_offset;
2267 rt2x00usb_register_read(rt2x00dev, AIFSN_CSR, ®);
2268 rt2x00_set_field32(®, field, queue->aifs);
2269 rt2x00usb_register_write(rt2x00dev, AIFSN_CSR, reg);
2271 rt2x00usb_register_read(rt2x00dev, CWMIN_CSR, ®);
2272 rt2x00_set_field32(®, field, queue->cw_min);
2273 rt2x00usb_register_write(rt2x00dev, CWMIN_CSR, reg);
2275 rt2x00usb_register_read(rt2x00dev, CWMAX_CSR, ®);
2276 rt2x00_set_field32(®, field, queue->cw_max);
2277 rt2x00usb_register_write(rt2x00dev, CWMAX_CSR, reg);
2282 static u64 rt73usb_get_tsf(struct ieee80211_hw *hw)
2284 struct rt2x00_dev *rt2x00dev = hw->priv;
2288 rt2x00usb_register_read(rt2x00dev, TXRX_CSR13, ®);
2289 tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32;
2290 rt2x00usb_register_read(rt2x00dev, TXRX_CSR12, ®);
2291 tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER);
2296 static const struct ieee80211_ops rt73usb_mac80211_ops = {
2298 .start = rt2x00mac_start,
2299 .stop = rt2x00mac_stop,
2300 .add_interface = rt2x00mac_add_interface,
2301 .remove_interface = rt2x00mac_remove_interface,
2302 .config = rt2x00mac_config,
2303 .configure_filter = rt2x00mac_configure_filter,
2304 .set_tim = rt2x00mac_set_tim,
2305 .set_key = rt2x00mac_set_key,
2306 .sw_scan_start = rt2x00mac_sw_scan_start,
2307 .sw_scan_complete = rt2x00mac_sw_scan_complete,
2308 .get_stats = rt2x00mac_get_stats,
2309 .bss_info_changed = rt2x00mac_bss_info_changed,
2310 .conf_tx = rt73usb_conf_tx,
2311 .get_tsf = rt73usb_get_tsf,
2312 .rfkill_poll = rt2x00mac_rfkill_poll,
2313 .flush = rt2x00mac_flush,
2314 .set_antenna = rt2x00mac_set_antenna,
2315 .get_antenna = rt2x00mac_get_antenna,
2316 .get_ringparam = rt2x00mac_get_ringparam,
2317 .tx_frames_pending = rt2x00mac_tx_frames_pending,
2320 static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
2321 .probe_hw = rt73usb_probe_hw,
2322 .get_firmware_name = rt73usb_get_firmware_name,
2323 .check_firmware = rt73usb_check_firmware,
2324 .load_firmware = rt73usb_load_firmware,
2325 .initialize = rt2x00usb_initialize,
2326 .uninitialize = rt2x00usb_uninitialize,
2327 .clear_entry = rt2x00usb_clear_entry,
2328 .set_device_state = rt73usb_set_device_state,
2329 .rfkill_poll = rt73usb_rfkill_poll,
2330 .link_stats = rt73usb_link_stats,
2331 .reset_tuner = rt73usb_reset_tuner,
2332 .link_tuner = rt73usb_link_tuner,
2333 .watchdog = rt2x00usb_watchdog,
2334 .start_queue = rt73usb_start_queue,
2335 .kick_queue = rt2x00usb_kick_queue,
2336 .stop_queue = rt73usb_stop_queue,
2337 .flush_queue = rt2x00usb_flush_queue,
2338 .write_tx_desc = rt73usb_write_tx_desc,
2339 .write_beacon = rt73usb_write_beacon,
2340 .clear_beacon = rt73usb_clear_beacon,
2341 .get_tx_data_len = rt73usb_get_tx_data_len,
2342 .fill_rxdone = rt73usb_fill_rxdone,
2343 .config_shared_key = rt73usb_config_shared_key,
2344 .config_pairwise_key = rt73usb_config_pairwise_key,
2345 .config_filter = rt73usb_config_filter,
2346 .config_intf = rt73usb_config_intf,
2347 .config_erp = rt73usb_config_erp,
2348 .config_ant = rt73usb_config_ant,
2349 .config = rt73usb_config,
2352 static const struct data_queue_desc rt73usb_queue_rx = {
2354 .data_size = DATA_FRAME_SIZE,
2355 .desc_size = RXD_DESC_SIZE,
2356 .priv_size = sizeof(struct queue_entry_priv_usb),
2359 static const struct data_queue_desc rt73usb_queue_tx = {
2361 .data_size = DATA_FRAME_SIZE,
2362 .desc_size = TXD_DESC_SIZE,
2363 .priv_size = sizeof(struct queue_entry_priv_usb),
2366 static const struct data_queue_desc rt73usb_queue_bcn = {
2368 .data_size = MGMT_FRAME_SIZE,
2369 .desc_size = TXINFO_SIZE,
2370 .priv_size = sizeof(struct queue_entry_priv_usb),
2373 static const struct rt2x00_ops rt73usb_ops = {
2374 .name = KBUILD_MODNAME,
2377 .eeprom_size = EEPROM_SIZE,
2379 .tx_queues = NUM_TX_QUEUES,
2380 .extra_tx_headroom = TXD_DESC_SIZE,
2381 .rx = &rt73usb_queue_rx,
2382 .tx = &rt73usb_queue_tx,
2383 .bcn = &rt73usb_queue_bcn,
2384 .lib = &rt73usb_rt2x00_ops,
2385 .hw = &rt73usb_mac80211_ops,
2386 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
2387 .debugfs = &rt73usb_rt2x00debug,
2388 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
2392 * rt73usb module information.
2394 static struct usb_device_id rt73usb_device_table[] = {
2396 { USB_DEVICE(0x07b8, 0xb21b) },
2397 { USB_DEVICE(0x07b8, 0xb21c) },
2398 { USB_DEVICE(0x07b8, 0xb21d) },
2399 { USB_DEVICE(0x07b8, 0xb21e) },
2400 { USB_DEVICE(0x07b8, 0xb21f) },
2402 { USB_DEVICE(0x14b2, 0x3c10) },
2404 { USB_DEVICE(0x148f, 0x9021) },
2405 { USB_DEVICE(0x0eb0, 0x9021) },
2407 { USB_DEVICE(0x18c5, 0x0002) },
2409 { USB_DEVICE(0x1690, 0x0722) },
2411 { USB_DEVICE(0x0b05, 0x1723) },
2412 { USB_DEVICE(0x0b05, 0x1724) },
2414 { USB_DEVICE(0x050d, 0x705a) },
2415 { USB_DEVICE(0x050d, 0x905b) },
2416 { USB_DEVICE(0x050d, 0x905c) },
2418 { USB_DEVICE(0x1631, 0xc019) },
2419 { USB_DEVICE(0x08dd, 0x0120) },
2421 { USB_DEVICE(0x0411, 0x00d8) },
2422 { USB_DEVICE(0x0411, 0x00d9) },
2423 { USB_DEVICE(0x0411, 0x00e6) },
2424 { USB_DEVICE(0x0411, 0x00f4) },
2425 { USB_DEVICE(0x0411, 0x0116) },
2426 { USB_DEVICE(0x0411, 0x0119) },
2427 { USB_DEVICE(0x0411, 0x0137) },
2429 { USB_DEVICE(0x178d, 0x02be) },
2431 { USB_DEVICE(0x1371, 0x9022) },
2432 { USB_DEVICE(0x1371, 0x9032) },
2434 { USB_DEVICE(0x14b2, 0x3c22) },
2436 { USB_DEVICE(0x07aa, 0x002e) },
2438 { USB_DEVICE(0x07d1, 0x3c03) },
2439 { USB_DEVICE(0x07d1, 0x3c04) },
2440 { USB_DEVICE(0x07d1, 0x3c06) },
2441 { USB_DEVICE(0x07d1, 0x3c07) },
2443 { USB_DEVICE(0x7392, 0x7318) },
2444 { USB_DEVICE(0x7392, 0x7618) },
2446 { USB_DEVICE(0x1740, 0x3701) },
2448 { USB_DEVICE(0x15a9, 0x0004) },
2450 { USB_DEVICE(0x1044, 0x8008) },
2451 { USB_DEVICE(0x1044, 0x800a) },
2453 { USB_DEVICE(0x1472, 0x0009) },
2455 { USB_DEVICE(0x06f8, 0xe002) },
2456 { USB_DEVICE(0x06f8, 0xe010) },
2457 { USB_DEVICE(0x06f8, 0xe020) },
2459 { USB_DEVICE(0x13b1, 0x0020) },
2460 { USB_DEVICE(0x13b1, 0x0023) },
2461 { USB_DEVICE(0x13b1, 0x0028) },
2463 { USB_DEVICE(0x0db0, 0x4600) },
2464 { USB_DEVICE(0x0db0, 0x6877) },
2465 { USB_DEVICE(0x0db0, 0x6874) },
2466 { USB_DEVICE(0x0db0, 0xa861) },
2467 { USB_DEVICE(0x0db0, 0xa874) },
2469 { USB_DEVICE(0x1b75, 0x7318) },
2471 { USB_DEVICE(0x04bb, 0x093d) },
2472 { USB_DEVICE(0x148f, 0x2573) },
2473 { USB_DEVICE(0x148f, 0x2671) },
2474 { USB_DEVICE(0x0812, 0x3101) },
2476 { USB_DEVICE(0x18e8, 0x6196) },
2477 { USB_DEVICE(0x18e8, 0x6229) },
2478 { USB_DEVICE(0x18e8, 0x6238) },
2480 { USB_DEVICE(0x04e8, 0x4471) },
2482 { USB_DEVICE(0x1740, 0x7100) },
2484 { USB_DEVICE(0x0df6, 0x0024) },
2485 { USB_DEVICE(0x0df6, 0x0027) },
2486 { USB_DEVICE(0x0df6, 0x002f) },
2487 { USB_DEVICE(0x0df6, 0x90ac) },
2488 { USB_DEVICE(0x0df6, 0x9712) },
2490 { USB_DEVICE(0x0769, 0x31f3) },
2492 { USB_DEVICE(0x6933, 0x5001) },
2494 { USB_DEVICE(0x0471, 0x200a) },
2496 { USB_DEVICE(0x2019, 0xab01) },
2497 { USB_DEVICE(0x2019, 0xab50) },
2499 { USB_DEVICE(0x7167, 0x3840) },
2501 { USB_DEVICE(0x0cde, 0x001c) },
2503 { USB_DEVICE(0x0586, 0x3415) },
2507 MODULE_AUTHOR(DRV_PROJECT);
2508 MODULE_VERSION(DRV_VERSION);
2509 MODULE_DESCRIPTION("Ralink RT73 USB Wireless LAN driver.");
2510 MODULE_SUPPORTED_DEVICE("Ralink RT2571W & RT2671 USB chipset based cards");
2511 MODULE_DEVICE_TABLE(usb, rt73usb_device_table);
2512 MODULE_FIRMWARE(FIRMWARE_RT2571);
2513 MODULE_LICENSE("GPL");
2515 static int rt73usb_probe(struct usb_interface *usb_intf,
2516 const struct usb_device_id *id)
2518 return rt2x00usb_probe(usb_intf, &rt73usb_ops);
2521 static struct usb_driver rt73usb_driver = {
2522 .name = KBUILD_MODNAME,
2523 .id_table = rt73usb_device_table,
2524 .probe = rt73usb_probe,
2525 .disconnect = rt2x00usb_disconnect,
2526 .suspend = rt2x00usb_suspend,
2527 .resume = rt2x00usb_resume,
2530 static int __init rt73usb_init(void)
2532 return usb_register(&rt73usb_driver);
2535 static void __exit rt73usb_exit(void)
2537 usb_deregister(&rt73usb_driver);
2540 module_init(rt73usb_init);
2541 module_exit(rt73usb_exit);