2 Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
3 Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
4 <http://rt2x00.serialmonkey.com>
6 This program is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2 of the License, or
9 (at your option) any later version.
11 This program is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with this program; if not, write to the
18 Free Software Foundation, Inc.,
19 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
24 Abstract: rt2x00 generic device routines.
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/slab.h>
30 #include <linux/log2.h>
33 #include "rt2x00lib.h"
38 u32 rt2x00lib_get_bssidx(struct rt2x00_dev *rt2x00dev,
39 struct ieee80211_vif *vif)
42 * When in STA mode, bssidx is always 0 otherwise local_address[5]
43 * contains the bss number, see BSS_ID_MASK comments for details.
45 if (rt2x00dev->intf_sta_count)
47 return vif->addr[5] & (rt2x00dev->ops->max_ap_intf - 1);
49 EXPORT_SYMBOL_GPL(rt2x00lib_get_bssidx);
52 * Radio control handlers.
54 int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
59 * Don't enable the radio twice.
60 * And check if the hardware button has been disabled.
62 if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
66 * Initialize all data queues.
68 rt2x00queue_init_queues(rt2x00dev);
74 rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_ON);
78 rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_ON);
80 rt2x00leds_led_radio(rt2x00dev, true);
81 rt2x00led_led_activity(rt2x00dev, true);
83 set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
88 rt2x00queue_start_queues(rt2x00dev);
89 rt2x00link_start_tuner(rt2x00dev);
90 rt2x00link_start_agc(rt2x00dev);
93 * Start watchdog monitoring.
95 rt2x00link_start_watchdog(rt2x00dev);
100 void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
102 if (!test_and_clear_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
106 * Stop watchdog monitoring.
108 rt2x00link_stop_watchdog(rt2x00dev);
113 rt2x00link_stop_agc(rt2x00dev);
114 rt2x00link_stop_tuner(rt2x00dev);
115 rt2x00queue_stop_queues(rt2x00dev);
116 rt2x00queue_flush_queues(rt2x00dev, true);
121 rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF);
122 rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF);
123 rt2x00led_led_activity(rt2x00dev, false);
124 rt2x00leds_led_radio(rt2x00dev, false);
127 static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
128 struct ieee80211_vif *vif)
130 struct rt2x00_dev *rt2x00dev = data;
131 struct rt2x00_intf *intf = vif_to_intf(vif);
134 * It is possible the radio was disabled while the work had been
135 * scheduled. If that happens we should return here immediately,
136 * note that in the spinlock protected area above the delayed_flags
137 * have been cleared correctly.
139 if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
142 if (test_and_clear_bit(DELAYED_UPDATE_BEACON, &intf->delayed_flags))
143 rt2x00queue_update_beacon(rt2x00dev, vif);
146 static void rt2x00lib_intf_scheduled(struct work_struct *work)
148 struct rt2x00_dev *rt2x00dev =
149 container_of(work, struct rt2x00_dev, intf_work);
152 * Iterate over each interface and perform the
153 * requested configurations.
155 ieee80211_iterate_active_interfaces(rt2x00dev->hw,
156 rt2x00lib_intf_scheduled_iter,
160 static void rt2x00lib_autowakeup(struct work_struct *work)
162 struct rt2x00_dev *rt2x00dev =
163 container_of(work, struct rt2x00_dev, autowakeup_work.work);
165 if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
168 if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
169 ERROR(rt2x00dev, "Device failed to wakeup.\n");
170 clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags);
174 * Interrupt context handlers.
176 static void rt2x00lib_bc_buffer_iter(void *data, u8 *mac,
177 struct ieee80211_vif *vif)
179 struct rt2x00_dev *rt2x00dev = data;
183 * Only AP mode interfaces do broad- and multicast buffering
185 if (vif->type != NL80211_IFTYPE_AP)
189 * Send out buffered broad- and multicast frames
191 skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif);
193 rt2x00mac_tx(rt2x00dev->hw, skb);
194 skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif);
198 static void rt2x00lib_beaconupdate_iter(void *data, u8 *mac,
199 struct ieee80211_vif *vif)
201 struct rt2x00_dev *rt2x00dev = data;
203 if (vif->type != NL80211_IFTYPE_AP &&
204 vif->type != NL80211_IFTYPE_ADHOC &&
205 vif->type != NL80211_IFTYPE_MESH_POINT &&
206 vif->type != NL80211_IFTYPE_WDS)
210 * Update the beacon without locking. This is safe on PCI devices
211 * as they only update the beacon periodically here. This should
212 * never be called for USB devices.
214 WARN_ON(rt2x00_is_usb(rt2x00dev));
215 rt2x00queue_update_beacon_locked(rt2x00dev, vif);
218 void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
220 if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
223 /* send buffered bc/mc frames out for every bssid */
224 ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
225 rt2x00lib_bc_buffer_iter,
228 * Devices with pre tbtt interrupt don't need to update the beacon
229 * here as they will fetch the next beacon directly prior to
232 if (test_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags))
235 /* fetch next beacon */
236 ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
237 rt2x00lib_beaconupdate_iter,
240 EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
242 void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev)
244 if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
247 /* fetch next beacon */
248 ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
249 rt2x00lib_beaconupdate_iter,
252 EXPORT_SYMBOL_GPL(rt2x00lib_pretbtt);
254 void rt2x00lib_dmastart(struct queue_entry *entry)
256 set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
257 rt2x00queue_index_inc(entry, Q_INDEX);
259 EXPORT_SYMBOL_GPL(rt2x00lib_dmastart);
261 void rt2x00lib_dmadone(struct queue_entry *entry)
263 set_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags);
264 clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
265 rt2x00queue_index_inc(entry, Q_INDEX_DMA_DONE);
267 EXPORT_SYMBOL_GPL(rt2x00lib_dmadone);
269 void rt2x00lib_txdone(struct queue_entry *entry,
270 struct txdone_entry_desc *txdesc)
272 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
273 struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
274 struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
275 unsigned int header_length, i;
276 u8 rate_idx, rate_flags, retry_rates;
277 u8 skbdesc_flags = skbdesc->flags;
283 rt2x00queue_unmap_skb(entry);
286 * Remove the extra tx headroom from the skb.
288 skb_pull(entry->skb, rt2x00dev->ops->extra_tx_headroom);
291 * Signal that the TX descriptor is no longer in the skb.
293 skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
296 * Determine the length of 802.11 header.
298 header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
301 * Remove L2 padding which was added during
303 if (test_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags))
304 rt2x00queue_remove_l2pad(entry->skb, header_length);
307 * If the IV/EIV data was stripped from the frame before it was
308 * passed to the hardware, we should now reinsert it again because
309 * mac80211 will expect the same data to be present it the
310 * frame as it was passed to us.
312 if (test_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags))
313 rt2x00crypto_tx_insert_iv(entry->skb, header_length);
316 * Send frame to debugfs immediately, after this call is completed
317 * we are going to overwrite the skb->cb array.
319 rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry->skb);
322 * Determine if the frame has been successfully transmitted.
325 test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
326 test_bit(TXDONE_UNKNOWN, &txdesc->flags);
329 * Update TX statistics.
331 rt2x00dev->link.qual.tx_success += success;
332 rt2x00dev->link.qual.tx_failed += !success;
334 rate_idx = skbdesc->tx_rate_idx;
335 rate_flags = skbdesc->tx_rate_flags;
336 retry_rates = test_bit(TXDONE_FALLBACK, &txdesc->flags) ?
337 (txdesc->retry + 1) : 1;
340 * Initialize TX status
342 memset(&tx_info->status, 0, sizeof(tx_info->status));
343 tx_info->status.ack_signal = 0;
346 * Frame was send with retries, hardware tried
347 * different rates to send out the frame, at each
348 * retry it lowered the rate 1 step except when the
349 * lowest rate was used.
351 for (i = 0; i < retry_rates && i < IEEE80211_TX_MAX_RATES; i++) {
352 tx_info->status.rates[i].idx = rate_idx - i;
353 tx_info->status.rates[i].flags = rate_flags;
355 if (rate_idx - i == 0) {
357 * The lowest rate (index 0) was used until the
358 * number of max retries was reached.
360 tx_info->status.rates[i].count = retry_rates - i;
364 tx_info->status.rates[i].count = 1;
366 if (i < (IEEE80211_TX_MAX_RATES - 1))
367 tx_info->status.rates[i].idx = -1; /* terminate */
369 if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
371 tx_info->flags |= IEEE80211_TX_STAT_ACK;
373 rt2x00dev->low_level_stats.dot11ACKFailureCount++;
377 * Every single frame has it's own tx status, hence report
378 * every frame as ampdu of size 1.
380 * TODO: if we can find out how many frames were aggregated
381 * by the hw we could provide the real ampdu_len to mac80211
382 * which would allow the rc algorithm to better decide on
383 * which rates are suitable.
385 if (test_bit(TXDONE_AMPDU, &txdesc->flags) ||
386 tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
387 tx_info->flags |= IEEE80211_TX_STAT_AMPDU;
388 tx_info->status.ampdu_len = 1;
389 tx_info->status.ampdu_ack_len = success ? 1 : 0;
392 tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
395 if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
397 rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
399 rt2x00dev->low_level_stats.dot11RTSFailureCount++;
403 * Only send the status report to mac80211 when it's a frame
404 * that originated in mac80211. If this was a extra frame coming
405 * through a mac80211 library call (RTS/CTS) then we should not
406 * send the status report back.
408 if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) {
409 if (test_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags))
410 ieee80211_tx_status(rt2x00dev->hw, entry->skb);
412 ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb);
414 dev_kfree_skb_any(entry->skb);
417 * Make this entry available for reuse.
422 rt2x00dev->ops->lib->clear_entry(entry);
424 rt2x00queue_index_inc(entry, Q_INDEX_DONE);
427 * If the data queue was below the threshold before the txdone
428 * handler we must make sure the packet queue in the mac80211 stack
429 * is reenabled when the txdone handler has finished.
431 if (!rt2x00queue_threshold(entry->queue))
432 rt2x00queue_unpause_queue(entry->queue);
434 EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
436 void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status)
438 struct txdone_entry_desc txdesc;
441 __set_bit(status, &txdesc.flags);
444 rt2x00lib_txdone(entry, &txdesc);
446 EXPORT_SYMBOL_GPL(rt2x00lib_txdone_noinfo);
448 static u8 *rt2x00lib_find_ie(u8 *data, unsigned int len, u8 ie)
450 struct ieee80211_mgmt *mgmt = (void *)data;
453 pos = (u8 *)mgmt->u.beacon.variable;
456 if (pos + 2 + pos[1] > end)
468 static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev,
470 struct rxdone_entry_desc *rxdesc)
472 struct ieee80211_hdr *hdr = (void *) skb->data;
473 struct ieee80211_tim_ie *tim_ie;
478 /* If this is not a beacon, or if mac80211 has no powersaving
479 * configured, or if the device is already in powersaving mode
480 * we can exit now. */
481 if (likely(!ieee80211_is_beacon(hdr->frame_control) ||
482 !(rt2x00dev->hw->conf.flags & IEEE80211_CONF_PS)))
485 /* min. beacon length + FCS_LEN */
486 if (skb->len <= 40 + FCS_LEN)
489 /* and only beacons from the associated BSSID, please */
490 if (!(rxdesc->dev_flags & RXDONE_MY_BSS) ||
494 rt2x00dev->last_beacon = jiffies;
496 tim = rt2x00lib_find_ie(skb->data, skb->len - FCS_LEN, WLAN_EID_TIM);
500 if (tim[1] < sizeof(*tim_ie))
504 tim_ie = (struct ieee80211_tim_ie *) &tim[2];
506 /* Check whenever the PHY can be turned off again. */
508 /* 1. What about buffered unicast traffic for our AID? */
509 cam = ieee80211_check_tim(tim_ie, tim_len, rt2x00dev->aid);
511 /* 2. Maybe the AP wants to send multicast/broadcast data? */
512 cam |= (tim_ie->bitmap_ctrl & 0x01);
514 if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
515 rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
516 IEEE80211_CONF_CHANGE_PS);
519 static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
520 struct rxdone_entry_desc *rxdesc)
522 struct ieee80211_supported_band *sband;
523 const struct rt2x00_rate *rate;
525 int signal = rxdesc->signal;
526 int type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK);
528 switch (rxdesc->rate_mode) {
532 * For non-HT rates the MCS value needs to contain the
533 * actually used rate modulation (CCK or OFDM).
535 if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS)
536 signal = RATE_MCS(rxdesc->rate_mode, signal);
538 sband = &rt2x00dev->bands[rt2x00dev->curr_band];
539 for (i = 0; i < sband->n_bitrates; i++) {
540 rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
541 if (((type == RXDONE_SIGNAL_PLCP) &&
542 (rate->plcp == signal)) ||
543 ((type == RXDONE_SIGNAL_BITRATE) &&
544 (rate->bitrate == signal)) ||
545 ((type == RXDONE_SIGNAL_MCS) &&
546 (rate->mcs == signal))) {
551 case RATE_MODE_HT_MIX:
552 case RATE_MODE_HT_GREENFIELD:
553 if (signal >= 0 && signal <= 76)
560 WARNING(rt2x00dev, "Frame received with unrecognized signal, "
561 "mode=0x%.4x, signal=0x%.4x, type=%d.\n",
562 rxdesc->rate_mode, signal, type);
566 void rt2x00lib_rxdone(struct queue_entry *entry)
568 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
569 struct rxdone_entry_desc rxdesc;
571 struct ieee80211_rx_status *rx_status;
572 unsigned int header_length;
575 if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
576 !test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
579 if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
583 * Allocate a new sk_buffer. If no new buffer available, drop the
584 * received frame and reuse the existing buffer.
586 skb = rt2x00queue_alloc_rxskb(entry);
593 rt2x00queue_unmap_skb(entry);
596 * Extract the RXD details.
598 memset(&rxdesc, 0, sizeof(rxdesc));
599 rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
602 * Check for valid size in case we get corrupted descriptor from
605 if (unlikely(rxdesc.size == 0 ||
606 rxdesc.size > entry->queue->data_size)) {
607 WARNING(rt2x00dev, "Wrong frame size %d max %d.\n",
608 rxdesc.size, entry->queue->data_size);
609 dev_kfree_skb(entry->skb);
614 * The data behind the ieee80211 header must be
615 * aligned on a 4 byte boundary.
617 header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
620 * Hardware might have stripped the IV/EIV/ICV data,
621 * in that case it is possible that the data was
622 * provided separately (through hardware descriptor)
623 * in which case we should reinsert the data into the frame.
625 if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
626 (rxdesc.flags & RX_FLAG_IV_STRIPPED))
627 rt2x00crypto_rx_insert_iv(entry->skb, header_length,
629 else if (header_length &&
630 (rxdesc.size > header_length) &&
631 (rxdesc.dev_flags & RXDONE_L2PAD))
632 rt2x00queue_remove_l2pad(entry->skb, header_length);
634 /* Trim buffer to correct size */
635 skb_trim(entry->skb, rxdesc.size);
638 * Translate the signal to the correct bitrate index.
640 rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc);
641 if (rxdesc.rate_mode == RATE_MODE_HT_MIX ||
642 rxdesc.rate_mode == RATE_MODE_HT_GREENFIELD)
643 rxdesc.flags |= RX_FLAG_HT;
646 * Check if this is a beacon, and more frames have been
647 * buffered while we were in powersaving mode.
649 rt2x00lib_rxdone_check_ps(rt2x00dev, entry->skb, &rxdesc);
652 * Update extra components
654 rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc);
655 rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
656 rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
659 * Initialize RX status information, and send frame
662 rx_status = IEEE80211_SKB_RXCB(entry->skb);
663 rx_status->mactime = rxdesc.timestamp;
664 rx_status->band = rt2x00dev->curr_band;
665 rx_status->freq = rt2x00dev->curr_freq;
666 rx_status->rate_idx = rate_idx;
667 rx_status->signal = rxdesc.rssi;
668 rx_status->flag = rxdesc.flags;
669 rx_status->antenna = rt2x00dev->link.ant.active.rx;
671 ieee80211_rx_ni(rt2x00dev->hw, entry->skb);
675 * Replace the skb with the freshly allocated one.
681 rt2x00queue_index_inc(entry, Q_INDEX_DONE);
682 if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
683 test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
684 rt2x00dev->ops->lib->clear_entry(entry);
686 EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
689 * Driver initialization handlers.
691 const struct rt2x00_rate rt2x00_supported_rates[12] = {
693 .flags = DEV_RATE_CCK,
697 .mcs = RATE_MCS(RATE_MODE_CCK, 0),
700 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
704 .mcs = RATE_MCS(RATE_MODE_CCK, 1),
707 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
711 .mcs = RATE_MCS(RATE_MODE_CCK, 2),
714 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
718 .mcs = RATE_MCS(RATE_MODE_CCK, 3),
721 .flags = DEV_RATE_OFDM,
725 .mcs = RATE_MCS(RATE_MODE_OFDM, 0),
728 .flags = DEV_RATE_OFDM,
732 .mcs = RATE_MCS(RATE_MODE_OFDM, 1),
735 .flags = DEV_RATE_OFDM,
739 .mcs = RATE_MCS(RATE_MODE_OFDM, 2),
742 .flags = DEV_RATE_OFDM,
746 .mcs = RATE_MCS(RATE_MODE_OFDM, 3),
749 .flags = DEV_RATE_OFDM,
753 .mcs = RATE_MCS(RATE_MODE_OFDM, 4),
756 .flags = DEV_RATE_OFDM,
760 .mcs = RATE_MCS(RATE_MODE_OFDM, 5),
763 .flags = DEV_RATE_OFDM,
767 .mcs = RATE_MCS(RATE_MODE_OFDM, 6),
770 .flags = DEV_RATE_OFDM,
774 .mcs = RATE_MCS(RATE_MODE_OFDM, 7),
778 static void rt2x00lib_channel(struct ieee80211_channel *entry,
779 const int channel, const int tx_power,
782 /* XXX: this assumption about the band is wrong for 802.11j */
783 entry->band = channel <= 14 ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
784 entry->center_freq = ieee80211_channel_to_frequency(channel,
786 entry->hw_value = value;
787 entry->max_power = tx_power;
788 entry->max_antenna_gain = 0xff;
791 static void rt2x00lib_rate(struct ieee80211_rate *entry,
792 const u16 index, const struct rt2x00_rate *rate)
795 entry->bitrate = rate->bitrate;
796 entry->hw_value = index;
797 entry->hw_value_short = index;
799 if (rate->flags & DEV_RATE_SHORT_PREAMBLE)
800 entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE;
803 static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
804 struct hw_mode_spec *spec)
806 struct ieee80211_hw *hw = rt2x00dev->hw;
807 struct ieee80211_channel *channels;
808 struct ieee80211_rate *rates;
809 unsigned int num_rates;
813 if (spec->supported_rates & SUPPORT_RATE_CCK)
815 if (spec->supported_rates & SUPPORT_RATE_OFDM)
818 channels = kzalloc(sizeof(*channels) * spec->num_channels, GFP_KERNEL);
822 rates = kzalloc(sizeof(*rates) * num_rates, GFP_KERNEL);
824 goto exit_free_channels;
827 * Initialize Rate list.
829 for (i = 0; i < num_rates; i++)
830 rt2x00lib_rate(&rates[i], i, rt2x00_get_rate(i));
833 * Initialize Channel list.
835 for (i = 0; i < spec->num_channels; i++) {
836 rt2x00lib_channel(&channels[i],
837 spec->channels[i].channel,
838 spec->channels_info[i].max_power, i);
842 * Intitialize 802.11b, 802.11g
846 if (spec->supported_bands & SUPPORT_BAND_2GHZ) {
847 rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_channels = 14;
848 rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_bitrates = num_rates;
849 rt2x00dev->bands[IEEE80211_BAND_2GHZ].channels = channels;
850 rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates;
851 hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
852 &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
853 memcpy(&rt2x00dev->bands[IEEE80211_BAND_2GHZ].ht_cap,
854 &spec->ht, sizeof(spec->ht));
858 * Intitialize 802.11a
860 * Channels: OFDM, UNII, HiperLAN2.
862 if (spec->supported_bands & SUPPORT_BAND_5GHZ) {
863 rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_channels =
864 spec->num_channels - 14;
865 rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_bitrates =
867 rt2x00dev->bands[IEEE80211_BAND_5GHZ].channels = &channels[14];
868 rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4];
869 hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
870 &rt2x00dev->bands[IEEE80211_BAND_5GHZ];
871 memcpy(&rt2x00dev->bands[IEEE80211_BAND_5GHZ].ht_cap,
872 &spec->ht, sizeof(spec->ht));
879 ERROR(rt2x00dev, "Allocation ieee80211 modes failed.\n");
883 static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
885 if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
886 ieee80211_unregister_hw(rt2x00dev->hw);
888 if (likely(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ])) {
889 kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
890 kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->bitrates);
891 rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
892 rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
895 kfree(rt2x00dev->spec.channels_info);
898 static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
900 struct hw_mode_spec *spec = &rt2x00dev->spec;
903 if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
907 * Initialize HW modes.
909 status = rt2x00lib_probe_hw_modes(rt2x00dev, spec);
914 * Initialize HW fields.
916 rt2x00dev->hw->queues = rt2x00dev->ops->tx_queues;
919 * Initialize extra TX headroom required.
921 rt2x00dev->hw->extra_tx_headroom =
922 max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM,
923 rt2x00dev->ops->extra_tx_headroom);
926 * Take TX headroom required for alignment into account.
928 if (test_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags))
929 rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE;
930 else if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags))
931 rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE;
934 * Tell mac80211 about the size of our private STA structure.
936 rt2x00dev->hw->sta_data_size = sizeof(struct rt2x00_sta);
939 * Allocate tx status FIFO for driver use.
941 if (test_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags)) {
943 * Allocate the txstatus fifo. In the worst case the tx
944 * status fifo has to hold the tx status of all entries
945 * in all tx queues. Hence, calculate the kfifo size as
946 * tx_queues * entry_num and round up to the nearest
950 roundup_pow_of_two(rt2x00dev->ops->tx_queues *
951 rt2x00dev->ops->tx->entry_num *
954 status = kfifo_alloc(&rt2x00dev->txstatus_fifo, kfifo_size,
961 * Initialize tasklets if used by the driver. Tasklets are
962 * disabled until the interrupts are turned on. The driver
963 * has to handle that.
965 #define RT2X00_TASKLET_INIT(taskletname) \
966 if (rt2x00dev->ops->lib->taskletname) { \
967 tasklet_init(&rt2x00dev->taskletname, \
968 rt2x00dev->ops->lib->taskletname, \
969 (unsigned long)rt2x00dev); \
972 RT2X00_TASKLET_INIT(txstatus_tasklet);
973 RT2X00_TASKLET_INIT(pretbtt_tasklet);
974 RT2X00_TASKLET_INIT(tbtt_tasklet);
975 RT2X00_TASKLET_INIT(rxdone_tasklet);
976 RT2X00_TASKLET_INIT(autowake_tasklet);
978 #undef RT2X00_TASKLET_INIT
983 status = ieee80211_register_hw(rt2x00dev->hw);
987 set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags);
993 * Initialization/uninitialization handlers.
995 static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
997 if (!test_and_clear_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
1001 * Unregister extra components.
1003 rt2x00rfkill_unregister(rt2x00dev);
1006 * Allow the HW to uninitialize.
1008 rt2x00dev->ops->lib->uninitialize(rt2x00dev);
1011 * Free allocated queue entries.
1013 rt2x00queue_uninitialize(rt2x00dev);
1016 static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
1020 if (test_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
1024 * Allocate all queue entries.
1026 status = rt2x00queue_initialize(rt2x00dev);
1031 * Initialize the device.
1033 status = rt2x00dev->ops->lib->initialize(rt2x00dev);
1035 rt2x00queue_uninitialize(rt2x00dev);
1039 set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags);
1042 * Register the extra components.
1044 rt2x00rfkill_register(rt2x00dev);
1049 int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
1053 if (test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
1057 * If this is the first interface which is added,
1058 * we should load the firmware now.
1060 retval = rt2x00lib_load_firmware(rt2x00dev);
1065 * Initialize the device.
1067 retval = rt2x00lib_initialize(rt2x00dev);
1071 rt2x00dev->intf_ap_count = 0;
1072 rt2x00dev->intf_sta_count = 0;
1073 rt2x00dev->intf_associated = 0;
1075 /* Enable the radio */
1076 retval = rt2x00lib_enable_radio(rt2x00dev);
1080 set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags);
1085 void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev)
1087 if (!test_and_clear_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
1091 * Perhaps we can add something smarter here,
1092 * but for now just disabling the radio should do.
1094 rt2x00lib_disable_radio(rt2x00dev);
1096 rt2x00dev->intf_ap_count = 0;
1097 rt2x00dev->intf_sta_count = 0;
1098 rt2x00dev->intf_associated = 0;
1102 * driver allocation handlers.
1104 int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
1106 int retval = -ENOMEM;
1108 spin_lock_init(&rt2x00dev->irqmask_lock);
1109 mutex_init(&rt2x00dev->csr_mutex);
1111 set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
1114 * Make room for rt2x00_intf inside the per-interface
1115 * structure ieee80211_vif.
1117 rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf);
1120 * Determine which operating modes are supported, all modes
1121 * which require beaconing, depend on the availability of
1124 rt2x00dev->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
1125 if (rt2x00dev->ops->bcn->entry_num > 0)
1126 rt2x00dev->hw->wiphy->interface_modes |=
1127 BIT(NL80211_IFTYPE_ADHOC) |
1128 BIT(NL80211_IFTYPE_AP) |
1129 BIT(NL80211_IFTYPE_MESH_POINT) |
1130 BIT(NL80211_IFTYPE_WDS);
1135 rt2x00dev->workqueue =
1136 alloc_ordered_workqueue(wiphy_name(rt2x00dev->hw->wiphy), 0);
1137 if (!rt2x00dev->workqueue) {
1142 INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
1143 INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
1146 * Let the driver probe the device to detect the capabilities.
1148 retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev);
1150 ERROR(rt2x00dev, "Failed to allocate device.\n");
1155 * Allocate queue array.
1157 retval = rt2x00queue_allocate(rt2x00dev);
1162 * Initialize ieee80211 structure.
1164 retval = rt2x00lib_probe_hw(rt2x00dev);
1166 ERROR(rt2x00dev, "Failed to initialize hw.\n");
1171 * Register extra components.
1173 rt2x00link_register(rt2x00dev);
1174 rt2x00leds_register(rt2x00dev);
1175 rt2x00debug_register(rt2x00dev);
1180 rt2x00lib_remove_dev(rt2x00dev);
1184 EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev);
1186 void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
1188 clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
1193 rt2x00lib_disable_radio(rt2x00dev);
1198 cancel_work_sync(&rt2x00dev->intf_work);
1199 cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
1200 if (rt2x00_is_usb(rt2x00dev)) {
1201 del_timer_sync(&rt2x00dev->txstatus_timer);
1202 cancel_work_sync(&rt2x00dev->rxdone_work);
1203 cancel_work_sync(&rt2x00dev->txdone_work);
1205 destroy_workqueue(rt2x00dev->workqueue);
1208 * Free the tx status fifo.
1210 kfifo_free(&rt2x00dev->txstatus_fifo);
1213 * Kill the tx status tasklet.
1215 tasklet_kill(&rt2x00dev->txstatus_tasklet);
1216 tasklet_kill(&rt2x00dev->pretbtt_tasklet);
1217 tasklet_kill(&rt2x00dev->tbtt_tasklet);
1218 tasklet_kill(&rt2x00dev->rxdone_tasklet);
1219 tasklet_kill(&rt2x00dev->autowake_tasklet);
1222 * Uninitialize device.
1224 rt2x00lib_uninitialize(rt2x00dev);
1227 * Free extra components
1229 rt2x00debug_deregister(rt2x00dev);
1230 rt2x00leds_unregister(rt2x00dev);
1233 * Free ieee80211_hw memory.
1235 rt2x00lib_remove_hw(rt2x00dev);
1238 * Free firmware image.
1240 rt2x00lib_free_firmware(rt2x00dev);
1243 * Free queue structures.
1245 rt2x00queue_free(rt2x00dev);
1247 EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev);
1250 * Device state handlers
1253 int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
1255 NOTICE(rt2x00dev, "Going to sleep.\n");
1258 * Prevent mac80211 from accessing driver while suspended.
1260 if (!test_and_clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
1264 * Cleanup as much as possible.
1266 rt2x00lib_uninitialize(rt2x00dev);
1269 * Suspend/disable extra components.
1271 rt2x00leds_suspend(rt2x00dev);
1272 rt2x00debug_deregister(rt2x00dev);
1275 * Set device mode to sleep for power management,
1276 * on some hardware this call seems to consistently fail.
1277 * From the specifications it is hard to tell why it fails,
1278 * and if this is a "bad thing".
1279 * Overall it is safe to just ignore the failure and
1280 * continue suspending. The only downside is that the
1281 * device will not be in optimal power save mode, but with
1282 * the radio and the other components already disabled the
1283 * device is as good as disabled.
1285 if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP))
1286 WARNING(rt2x00dev, "Device failed to enter sleep state, "
1287 "continue suspending.\n");
1291 EXPORT_SYMBOL_GPL(rt2x00lib_suspend);
1293 int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
1295 NOTICE(rt2x00dev, "Waking up.\n");
1298 * Restore/enable extra components.
1300 rt2x00debug_register(rt2x00dev);
1301 rt2x00leds_resume(rt2x00dev);
1304 * We are ready again to receive requests from mac80211.
1306 set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
1310 EXPORT_SYMBOL_GPL(rt2x00lib_resume);
1311 #endif /* CONFIG_PM */
1314 * rt2x00lib module information.
1316 MODULE_AUTHOR(DRV_PROJECT);
1317 MODULE_VERSION(DRV_VERSION);
1318 MODULE_DESCRIPTION("rt2x00 library");
1319 MODULE_LICENSE("GPL");