Merge branch 'x86-asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
[pandora-kernel.git] / drivers / net / wireless / libertas / if_usb.c
1 /**
2   * This file contains functions used in USB interface module.
3   */
4 #include <linux/delay.h>
5 #include <linux/moduleparam.h>
6 #include <linux/firmware.h>
7 #include <linux/netdevice.h>
8 #include <linux/usb.h>
9
10 #ifdef CONFIG_OLPC
11 #include <asm/olpc.h>
12 #endif
13
14 #define DRV_NAME "usb8xxx"
15
16 #include "host.h"
17 #include "decl.h"
18 #include "defs.h"
19 #include "dev.h"
20 #include "cmd.h"
21 #include "if_usb.h"
22
23 #define INSANEDEBUG     0
24 #define lbs_deb_usb2(...) do { if (INSANEDEBUG) lbs_deb_usbd(__VA_ARGS__); } while (0)
25
26 #define MESSAGE_HEADER_LEN      4
27
28 static char *lbs_fw_name = "usb8388.bin";
29 module_param_named(fw_name, lbs_fw_name, charp, 0644);
30
31 static struct usb_device_id if_usb_table[] = {
32         /* Enter the device signature inside */
33         { USB_DEVICE(0x1286, 0x2001) },
34         { USB_DEVICE(0x05a3, 0x8388) },
35         {}      /* Terminating entry */
36 };
37
38 MODULE_DEVICE_TABLE(usb, if_usb_table);
39
40 static void if_usb_receive(struct urb *urb);
41 static void if_usb_receive_fwload(struct urb *urb);
42 static int __if_usb_prog_firmware(struct if_usb_card *cardp,
43                                         const char *fwname, int cmd);
44 static int if_usb_prog_firmware(struct if_usb_card *cardp,
45                                         const char *fwname, int cmd);
46 static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type,
47                                uint8_t *payload, uint16_t nb);
48 static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload,
49                         uint16_t nb);
50 static void if_usb_free(struct if_usb_card *cardp);
51 static int if_usb_submit_rx_urb(struct if_usb_card *cardp);
52 static int if_usb_reset_device(struct if_usb_card *cardp);
53
54 /* sysfs hooks */
55
56 /**
57  *  Set function to write firmware to device's persistent memory
58  */
59 static ssize_t if_usb_firmware_set(struct device *dev,
60                 struct device_attribute *attr, const char *buf, size_t count)
61 {
62         struct lbs_private *priv = to_net_dev(dev)->ml_priv;
63         struct if_usb_card *cardp = priv->card;
64         int ret;
65
66         ret = if_usb_prog_firmware(cardp, buf, BOOT_CMD_UPDATE_FW);
67         if (ret == 0)
68                 return count;
69
70         return ret;
71 }
72
73 /**
74  * lbs_flash_fw attribute to be exported per ethX interface through sysfs
75  * (/sys/class/net/ethX/lbs_flash_fw).  Use this like so to write firmware to
76  * the device's persistent memory:
77  * echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_fw
78  */
79 static DEVICE_ATTR(lbs_flash_fw, 0200, NULL, if_usb_firmware_set);
80
81 /**
82  *  Set function to write firmware to device's persistent memory
83  */
84 static ssize_t if_usb_boot2_set(struct device *dev,
85                 struct device_attribute *attr, const char *buf, size_t count)
86 {
87         struct lbs_private *priv = to_net_dev(dev)->ml_priv;
88         struct if_usb_card *cardp = priv->card;
89         int ret;
90
91         ret = if_usb_prog_firmware(cardp, buf, BOOT_CMD_UPDATE_BOOT2);
92         if (ret == 0)
93                 return count;
94
95         return ret;
96 }
97
98 /**
99  * lbs_flash_boot2 attribute to be exported per ethX interface through sysfs
100  * (/sys/class/net/ethX/lbs_flash_boot2).  Use this like so to write firmware
101  * to the device's persistent memory:
102  * echo usb8388-5.126.0.p5.bin > /sys/class/net/ethX/lbs_flash_boot2
103  */
104 static DEVICE_ATTR(lbs_flash_boot2, 0200, NULL, if_usb_boot2_set);
105
106 /**
107  *  @brief  call back function to handle the status of the URB
108  *  @param urb          pointer to urb structure
109  *  @return             N/A
110  */
111 static void if_usb_write_bulk_callback(struct urb *urb)
112 {
113         struct if_usb_card *cardp = (struct if_usb_card *) urb->context;
114
115         /* handle the transmission complete validations */
116
117         if (urb->status == 0) {
118                 struct lbs_private *priv = cardp->priv;
119
120                 lbs_deb_usb2(&urb->dev->dev, "URB status is successful\n");
121                 lbs_deb_usb2(&urb->dev->dev, "Actual length transmitted %d\n",
122                              urb->actual_length);
123
124                 /* Boot commands such as UPDATE_FW and UPDATE_BOOT2 are not
125                  * passed up to the lbs level.
126                  */
127                 if (priv && priv->dnld_sent != DNLD_BOOTCMD_SENT)
128                         lbs_host_to_card_done(priv);
129         } else {
130                 /* print the failure status number for debug */
131                 lbs_pr_info("URB in failure status: %d\n", urb->status);
132         }
133
134         return;
135 }
136
137 /**
138  *  @brief  free tx/rx urb, skb and rx buffer
139  *  @param cardp        pointer if_usb_card
140  *  @return             N/A
141  */
142 static void if_usb_free(struct if_usb_card *cardp)
143 {
144         lbs_deb_enter(LBS_DEB_USB);
145
146         /* Unlink tx & rx urb */
147         usb_kill_urb(cardp->tx_urb);
148         usb_kill_urb(cardp->rx_urb);
149
150         usb_free_urb(cardp->tx_urb);
151         cardp->tx_urb = NULL;
152
153         usb_free_urb(cardp->rx_urb);
154         cardp->rx_urb = NULL;
155
156         kfree(cardp->ep_out_buf);
157         cardp->ep_out_buf = NULL;
158
159         lbs_deb_leave(LBS_DEB_USB);
160 }
161
162 static void if_usb_setup_firmware(struct lbs_private *priv)
163 {
164         struct if_usb_card *cardp = priv->card;
165         struct cmd_ds_set_boot2_ver b2_cmd;
166         struct cmd_ds_802_11_fw_wake_method wake_method;
167
168         b2_cmd.hdr.size = cpu_to_le16(sizeof(b2_cmd));
169         b2_cmd.action = 0;
170         b2_cmd.version = cardp->boot2_version;
171
172         if (lbs_cmd_with_response(priv, CMD_SET_BOOT2_VER, &b2_cmd))
173                 lbs_deb_usb("Setting boot2 version failed\n");
174
175         priv->wol_gpio = 2; /* Wake via GPIO2... */
176         priv->wol_gap = 20; /* ... after 20ms    */
177         lbs_host_sleep_cfg(priv, EHS_WAKE_ON_UNICAST_DATA,
178                         (struct wol_config *) NULL);
179
180         wake_method.hdr.size = cpu_to_le16(sizeof(wake_method));
181         wake_method.action = cpu_to_le16(CMD_ACT_GET);
182         if (lbs_cmd_with_response(priv, CMD_802_11_FW_WAKE_METHOD, &wake_method)) {
183                 lbs_pr_info("Firmware does not seem to support PS mode\n");
184         } else {
185                 if (le16_to_cpu(wake_method.method) == CMD_WAKE_METHOD_COMMAND_INT) {
186                         lbs_deb_usb("Firmware seems to support PS with wake-via-command\n");
187                         priv->ps_supported = 1;
188                 } else {
189                         /* The versions which boot up this way don't seem to
190                            work even if we set it to the command interrupt */
191                         lbs_pr_info("Firmware doesn't wake via command interrupt; disabling PS mode\n");
192                 }
193         }
194 }
195
196 static void if_usb_fw_timeo(unsigned long priv)
197 {
198         struct if_usb_card *cardp = (void *)priv;
199
200         if (cardp->fwdnldover) {
201                 lbs_deb_usb("Download complete, no event. Assuming success\n");
202         } else {
203                 lbs_pr_err("Download timed out\n");
204                 cardp->surprise_removed = 1;
205         }
206         wake_up(&cardp->fw_wq);
207 }
208
209 #ifdef CONFIG_OLPC
210 static void if_usb_reset_olpc_card(struct lbs_private *priv)
211 {
212         printk(KERN_CRIT "Resetting OLPC wireless via EC...\n");
213         olpc_ec_cmd(0x25, NULL, 0, NULL, 0);
214 }
215 #endif
216
217 /**
218  *  @brief sets the configuration values
219  *  @param ifnum        interface number
220  *  @param id           pointer to usb_device_id
221  *  @return             0 on success, error code on failure
222  */
223 static int if_usb_probe(struct usb_interface *intf,
224                         const struct usb_device_id *id)
225 {
226         struct usb_device *udev;
227         struct usb_host_interface *iface_desc;
228         struct usb_endpoint_descriptor *endpoint;
229         struct lbs_private *priv;
230         struct if_usb_card *cardp;
231         int i;
232
233         udev = interface_to_usbdev(intf);
234
235         cardp = kzalloc(sizeof(struct if_usb_card), GFP_KERNEL);
236         if (!cardp) {
237                 lbs_pr_err("Out of memory allocating private data.\n");
238                 goto error;
239         }
240
241         setup_timer(&cardp->fw_timeout, if_usb_fw_timeo, (unsigned long)cardp);
242         init_waitqueue_head(&cardp->fw_wq);
243
244         cardp->udev = udev;
245         iface_desc = intf->cur_altsetting;
246
247         lbs_deb_usbd(&udev->dev, "bcdUSB = 0x%X bDeviceClass = 0x%X"
248                      " bDeviceSubClass = 0x%X, bDeviceProtocol = 0x%X\n",
249                      le16_to_cpu(udev->descriptor.bcdUSB),
250                      udev->descriptor.bDeviceClass,
251                      udev->descriptor.bDeviceSubClass,
252                      udev->descriptor.bDeviceProtocol);
253
254         for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
255                 endpoint = &iface_desc->endpoint[i].desc;
256                 if (usb_endpoint_is_bulk_in(endpoint)) {
257                         cardp->ep_in_size = le16_to_cpu(endpoint->wMaxPacketSize);
258                         cardp->ep_in = usb_endpoint_num(endpoint);
259
260                         lbs_deb_usbd(&udev->dev, "in_endpoint = %d\n", cardp->ep_in);
261                         lbs_deb_usbd(&udev->dev, "Bulk in size is %d\n", cardp->ep_in_size);
262
263                 } else if (usb_endpoint_is_bulk_out(endpoint)) {
264                         cardp->ep_out_size = le16_to_cpu(endpoint->wMaxPacketSize);
265                         cardp->ep_out = usb_endpoint_num(endpoint);
266
267                         lbs_deb_usbd(&udev->dev, "out_endpoint = %d\n", cardp->ep_out);
268                         lbs_deb_usbd(&udev->dev, "Bulk out size is %d\n", cardp->ep_out_size);
269                 }
270         }
271         if (!cardp->ep_out_size || !cardp->ep_in_size) {
272                 lbs_deb_usbd(&udev->dev, "Endpoints not found\n");
273                 goto dealloc;
274         }
275         if (!(cardp->rx_urb = usb_alloc_urb(0, GFP_KERNEL))) {
276                 lbs_deb_usbd(&udev->dev, "Rx URB allocation failed\n");
277                 goto dealloc;
278         }
279         if (!(cardp->tx_urb = usb_alloc_urb(0, GFP_KERNEL))) {
280                 lbs_deb_usbd(&udev->dev, "Tx URB allocation failed\n");
281                 goto dealloc;
282         }
283         cardp->ep_out_buf = kmalloc(MRVDRV_ETH_TX_PACKET_BUFFER_SIZE, GFP_KERNEL);
284         if (!cardp->ep_out_buf) {
285                 lbs_deb_usbd(&udev->dev, "Could not allocate buffer\n");
286                 goto dealloc;
287         }
288
289         /* Upload firmware */
290         if (__if_usb_prog_firmware(cardp, lbs_fw_name, BOOT_CMD_FW_BY_USB)) {
291                 lbs_deb_usbd(&udev->dev, "FW upload failed\n");
292                 goto err_prog_firmware;
293         }
294
295         if (!(priv = lbs_add_card(cardp, &udev->dev)))
296                 goto err_prog_firmware;
297
298         cardp->priv = priv;
299         cardp->priv->fw_ready = 1;
300
301         priv->hw_host_to_card = if_usb_host_to_card;
302 #ifdef CONFIG_OLPC
303         if (machine_is_olpc())
304                 priv->reset_card = if_usb_reset_olpc_card;
305 #endif
306
307         cardp->boot2_version = udev->descriptor.bcdDevice;
308
309         if_usb_submit_rx_urb(cardp);
310
311         if (lbs_start_card(priv))
312                 goto err_start_card;
313
314         if_usb_setup_firmware(priv);
315
316         usb_get_dev(udev);
317         usb_set_intfdata(intf, cardp);
318
319         if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_fw))
320                 lbs_pr_err("cannot register lbs_flash_fw attribute\n");
321
322         if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2))
323                 lbs_pr_err("cannot register lbs_flash_boot2 attribute\n");
324
325         return 0;
326
327 err_start_card:
328         lbs_remove_card(priv);
329 err_prog_firmware:
330         if_usb_reset_device(cardp);
331 dealloc:
332         if_usb_free(cardp);
333
334 error:
335         return -ENOMEM;
336 }
337
338 /**
339  *  @brief free resource and cleanup
340  *  @param intf         USB interface structure
341  *  @return             N/A
342  */
343 static void if_usb_disconnect(struct usb_interface *intf)
344 {
345         struct if_usb_card *cardp = usb_get_intfdata(intf);
346         struct lbs_private *priv = (struct lbs_private *) cardp->priv;
347
348         lbs_deb_enter(LBS_DEB_MAIN);
349
350         device_remove_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2);
351         device_remove_file(&priv->dev->dev, &dev_attr_lbs_flash_fw);
352
353         cardp->surprise_removed = 1;
354
355         if (priv) {
356                 priv->surpriseremoved = 1;
357                 lbs_stop_card(priv);
358                 lbs_remove_card(priv);
359         }
360
361         /* Unlink and free urb */
362         if_usb_free(cardp);
363
364         usb_set_intfdata(intf, NULL);
365         usb_put_dev(interface_to_usbdev(intf));
366
367         lbs_deb_leave(LBS_DEB_MAIN);
368 }
369
370 /**
371  *  @brief  This function download FW
372  *  @param priv         pointer to struct lbs_private
373  *  @return             0
374  */
375 static int if_usb_send_fw_pkt(struct if_usb_card *cardp)
376 {
377         struct fwdata *fwdata = cardp->ep_out_buf;
378         const uint8_t *firmware = cardp->fw->data;
379
380         /* If we got a CRC failure on the last block, back
381            up and retry it */
382         if (!cardp->CRC_OK) {
383                 cardp->totalbytes = cardp->fwlastblksent;
384                 cardp->fwseqnum--;
385         }
386
387         lbs_deb_usb2(&cardp->udev->dev, "totalbytes = %d\n",
388                      cardp->totalbytes);
389
390         /* struct fwdata (which we sent to the card) has an
391            extra __le32 field in between the header and the data,
392            which is not in the struct fwheader in the actual
393            firmware binary. Insert the seqnum in the middle... */
394         memcpy(&fwdata->hdr, &firmware[cardp->totalbytes],
395                sizeof(struct fwheader));
396
397         cardp->fwlastblksent = cardp->totalbytes;
398         cardp->totalbytes += sizeof(struct fwheader);
399
400         memcpy(fwdata->data, &firmware[cardp->totalbytes],
401                le32_to_cpu(fwdata->hdr.datalength));
402
403         lbs_deb_usb2(&cardp->udev->dev, "Data length = %d\n",
404                      le32_to_cpu(fwdata->hdr.datalength));
405
406         fwdata->seqnum = cpu_to_le32(++cardp->fwseqnum);
407         cardp->totalbytes += le32_to_cpu(fwdata->hdr.datalength);
408
409         usb_tx_block(cardp, cardp->ep_out_buf, sizeof(struct fwdata) +
410                      le32_to_cpu(fwdata->hdr.datalength));
411
412         if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_DATA_TO_RECV)) {
413                 lbs_deb_usb2(&cardp->udev->dev, "There are data to follow\n");
414                 lbs_deb_usb2(&cardp->udev->dev, "seqnum = %d totalbytes = %d\n",
415                              cardp->fwseqnum, cardp->totalbytes);
416         } else if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_LAST_BLOCK)) {
417                 lbs_deb_usb2(&cardp->udev->dev, "Host has finished FW downloading\n");
418                 lbs_deb_usb2(&cardp->udev->dev, "Donwloading FW JUMP BLOCK\n");
419
420                 cardp->fwfinalblk = 1;
421         }
422
423         lbs_deb_usb2(&cardp->udev->dev, "Firmware download done; size %d\n",
424                      cardp->totalbytes);
425
426         return 0;
427 }
428
429 static int if_usb_reset_device(struct if_usb_card *cardp)
430 {
431         struct cmd_ds_command *cmd = cardp->ep_out_buf + 4;
432         int ret;
433
434         lbs_deb_enter(LBS_DEB_USB);
435
436         *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST);
437
438         cmd->command = cpu_to_le16(CMD_802_11_RESET);
439         cmd->size = cpu_to_le16(sizeof(struct cmd_header));
440         cmd->result = cpu_to_le16(0);
441         cmd->seqnum = cpu_to_le16(0x5a5a);
442         usb_tx_block(cardp, cardp->ep_out_buf, 4 + sizeof(struct cmd_header));
443
444         msleep(100);
445         ret = usb_reset_device(cardp->udev);
446         msleep(100);
447
448 #ifdef CONFIG_OLPC
449         if (ret && machine_is_olpc())
450                 if_usb_reset_olpc_card(NULL);
451 #endif
452
453         lbs_deb_leave_args(LBS_DEB_USB, "ret %d", ret);
454
455         return ret;
456 }
457
458 /**
459  *  @brief This function transfer the data to the device.
460  *  @param priv         pointer to struct lbs_private
461  *  @param payload      pointer to payload data
462  *  @param nb           data length
463  *  @return             0 or -1
464  */
465 static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, uint16_t nb)
466 {
467         int ret = -1;
468
469         /* check if device is removed */
470         if (cardp->surprise_removed) {
471                 lbs_deb_usbd(&cardp->udev->dev, "Device removed\n");
472                 goto tx_ret;
473         }
474
475         usb_fill_bulk_urb(cardp->tx_urb, cardp->udev,
476                           usb_sndbulkpipe(cardp->udev,
477                                           cardp->ep_out),
478                           payload, nb, if_usb_write_bulk_callback, cardp);
479
480         cardp->tx_urb->transfer_flags |= URB_ZERO_PACKET;
481
482         if ((ret = usb_submit_urb(cardp->tx_urb, GFP_ATOMIC))) {
483                 lbs_deb_usbd(&cardp->udev->dev, "usb_submit_urb failed: %d\n", ret);
484                 ret = -1;
485         } else {
486                 lbs_deb_usb2(&cardp->udev->dev, "usb_submit_urb success\n");
487                 ret = 0;
488         }
489
490 tx_ret:
491         return ret;
492 }
493
494 static int __if_usb_submit_rx_urb(struct if_usb_card *cardp,
495                                   void (*callbackfn)(struct urb *urb))
496 {
497         struct sk_buff *skb;
498         int ret = -1;
499
500         if (!(skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE))) {
501                 lbs_pr_err("No free skb\n");
502                 goto rx_ret;
503         }
504
505         cardp->rx_skb = skb;
506
507         /* Fill the receive configuration URB and initialise the Rx call back */
508         usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
509                           usb_rcvbulkpipe(cardp->udev, cardp->ep_in),
510                           (void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET),
511                           MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn,
512                           cardp);
513
514         cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET;
515
516         lbs_deb_usb2(&cardp->udev->dev, "Pointer for rx_urb %p\n", cardp->rx_urb);
517         if ((ret = usb_submit_urb(cardp->rx_urb, GFP_ATOMIC))) {
518                 lbs_deb_usbd(&cardp->udev->dev, "Submit Rx URB failed: %d\n", ret);
519                 kfree_skb(skb);
520                 cardp->rx_skb = NULL;
521                 ret = -1;
522         } else {
523                 lbs_deb_usb2(&cardp->udev->dev, "Submit Rx URB success\n");
524                 ret = 0;
525         }
526
527 rx_ret:
528         return ret;
529 }
530
531 static int if_usb_submit_rx_urb_fwload(struct if_usb_card *cardp)
532 {
533         return __if_usb_submit_rx_urb(cardp, &if_usb_receive_fwload);
534 }
535
536 static int if_usb_submit_rx_urb(struct if_usb_card *cardp)
537 {
538         return __if_usb_submit_rx_urb(cardp, &if_usb_receive);
539 }
540
541 static void if_usb_receive_fwload(struct urb *urb)
542 {
543         struct if_usb_card *cardp = urb->context;
544         struct sk_buff *skb = cardp->rx_skb;
545         struct fwsyncheader *syncfwheader;
546         struct bootcmdresp bootcmdresp;
547
548         if (urb->status) {
549                 lbs_deb_usbd(&cardp->udev->dev,
550                              "URB status is failed during fw load\n");
551                 kfree_skb(skb);
552                 return;
553         }
554
555         if (cardp->fwdnldover) {
556                 __le32 *tmp = (__le32 *)(skb->data + IPFIELD_ALIGN_OFFSET);
557
558                 if (tmp[0] == cpu_to_le32(CMD_TYPE_INDICATION) &&
559                     tmp[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY)) {
560                         lbs_pr_info("Firmware ready event received\n");
561                         wake_up(&cardp->fw_wq);
562                 } else {
563                         lbs_deb_usb("Waiting for confirmation; got %x %x\n",
564                                     le32_to_cpu(tmp[0]), le32_to_cpu(tmp[1]));
565                         if_usb_submit_rx_urb_fwload(cardp);
566                 }
567                 kfree_skb(skb);
568                 return;
569         }
570         if (cardp->bootcmdresp <= 0) {
571                 memcpy (&bootcmdresp, skb->data + IPFIELD_ALIGN_OFFSET,
572                         sizeof(bootcmdresp));
573
574                 if (le16_to_cpu(cardp->udev->descriptor.bcdDevice) < 0x3106) {
575                         kfree_skb(skb);
576                         if_usb_submit_rx_urb_fwload(cardp);
577                         cardp->bootcmdresp = BOOT_CMD_RESP_OK;
578                         lbs_deb_usbd(&cardp->udev->dev,
579                                      "Received valid boot command response\n");
580                         return;
581                 }
582                 if (bootcmdresp.magic != cpu_to_le32(BOOT_CMD_MAGIC_NUMBER)) {
583                         if (bootcmdresp.magic == cpu_to_le32(CMD_TYPE_REQUEST) ||
584                             bootcmdresp.magic == cpu_to_le32(CMD_TYPE_DATA) ||
585                             bootcmdresp.magic == cpu_to_le32(CMD_TYPE_INDICATION)) {
586                                 if (!cardp->bootcmdresp)
587                                         lbs_pr_info("Firmware already seems alive; resetting\n");
588                                 cardp->bootcmdresp = -1;
589                         } else {
590                                 lbs_pr_info("boot cmd response wrong magic number (0x%x)\n",
591                                             le32_to_cpu(bootcmdresp.magic));
592                         }
593                 } else if ((bootcmdresp.cmd != BOOT_CMD_FW_BY_USB) &&
594                            (bootcmdresp.cmd != BOOT_CMD_UPDATE_FW) &&
595                            (bootcmdresp.cmd != BOOT_CMD_UPDATE_BOOT2)) {
596                         lbs_pr_info("boot cmd response cmd_tag error (%d)\n",
597                                     bootcmdresp.cmd);
598                 } else if (bootcmdresp.result != BOOT_CMD_RESP_OK) {
599                         lbs_pr_info("boot cmd response result error (%d)\n",
600                                     bootcmdresp.result);
601                 } else {
602                         cardp->bootcmdresp = 1;
603                         lbs_deb_usbd(&cardp->udev->dev,
604                                      "Received valid boot command response\n");
605                 }
606                 kfree_skb(skb);
607                 if_usb_submit_rx_urb_fwload(cardp);
608                 return;
609         }
610
611         syncfwheader = kmalloc(sizeof(struct fwsyncheader), GFP_ATOMIC);
612         if (!syncfwheader) {
613                 lbs_deb_usbd(&cardp->udev->dev, "Failure to allocate syncfwheader\n");
614                 kfree_skb(skb);
615                 return;
616         }
617
618         memcpy(syncfwheader, skb->data + IPFIELD_ALIGN_OFFSET,
619                sizeof(struct fwsyncheader));
620
621         if (!syncfwheader->cmd) {
622                 lbs_deb_usb2(&cardp->udev->dev, "FW received Blk with correct CRC\n");
623                 lbs_deb_usb2(&cardp->udev->dev, "FW received Blk seqnum = %d\n",
624                              le32_to_cpu(syncfwheader->seqnum));
625                 cardp->CRC_OK = 1;
626         } else {
627                 lbs_deb_usbd(&cardp->udev->dev, "FW received Blk with CRC error\n");
628                 cardp->CRC_OK = 0;
629         }
630
631         kfree_skb(skb);
632
633         /* Give device 5s to either write firmware to its RAM or eeprom */
634         mod_timer(&cardp->fw_timeout, jiffies + (HZ*5));
635
636         if (cardp->fwfinalblk) {
637                 cardp->fwdnldover = 1;
638                 goto exit;
639         }
640
641         if_usb_send_fw_pkt(cardp);
642
643  exit:
644         if_usb_submit_rx_urb_fwload(cardp);
645
646         kfree(syncfwheader);
647
648         return;
649 }
650
651 #define MRVDRV_MIN_PKT_LEN      30
652
653 static inline void process_cmdtypedata(int recvlength, struct sk_buff *skb,
654                                        struct if_usb_card *cardp,
655                                        struct lbs_private *priv)
656 {
657         if (recvlength > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + MESSAGE_HEADER_LEN
658             || recvlength < MRVDRV_MIN_PKT_LEN) {
659                 lbs_deb_usbd(&cardp->udev->dev, "Packet length is Invalid\n");
660                 kfree_skb(skb);
661                 return;
662         }
663
664         skb_reserve(skb, IPFIELD_ALIGN_OFFSET);
665         skb_put(skb, recvlength);
666         skb_pull(skb, MESSAGE_HEADER_LEN);
667
668         lbs_process_rxed_packet(priv, skb);
669 }
670
671 static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff,
672                                       struct sk_buff *skb,
673                                       struct if_usb_card *cardp,
674                                       struct lbs_private *priv)
675 {
676         u8 i;
677
678         if (recvlength > LBS_CMD_BUFFER_SIZE) {
679                 lbs_deb_usbd(&cardp->udev->dev,
680                              "The receive buffer is too large\n");
681                 kfree_skb(skb);
682                 return;
683         }
684
685         BUG_ON(!in_interrupt());
686
687         spin_lock(&priv->driver_lock);
688
689         i = (priv->resp_idx == 0) ? 1 : 0;
690         BUG_ON(priv->resp_len[i]);
691         priv->resp_len[i] = (recvlength - MESSAGE_HEADER_LEN);
692         memcpy(priv->resp_buf[i], recvbuff + MESSAGE_HEADER_LEN,
693                 priv->resp_len[i]);
694         kfree_skb(skb);
695         lbs_notify_command_response(priv, i);
696
697         spin_unlock(&priv->driver_lock);
698
699         lbs_deb_usbd(&cardp->udev->dev,
700                     "Wake up main thread to handle cmd response\n");
701 }
702
703 /**
704  *  @brief This function reads of the packet into the upload buff,
705  *  wake up the main thread and initialise the Rx callack.
706  *
707  *  @param urb          pointer to struct urb
708  *  @return             N/A
709  */
710 static void if_usb_receive(struct urb *urb)
711 {
712         struct if_usb_card *cardp = urb->context;
713         struct sk_buff *skb = cardp->rx_skb;
714         struct lbs_private *priv = cardp->priv;
715         int recvlength = urb->actual_length;
716         uint8_t *recvbuff = NULL;
717         uint32_t recvtype = 0;
718         __le32 *pkt = (__le32 *)(skb->data + IPFIELD_ALIGN_OFFSET);
719         uint32_t event;
720
721         lbs_deb_enter(LBS_DEB_USB);
722
723         if (recvlength) {
724                 if (urb->status) {
725                         lbs_deb_usbd(&cardp->udev->dev, "RX URB failed: %d\n",
726                                      urb->status);
727                         kfree_skb(skb);
728                         goto setup_for_next;
729                 }
730
731                 recvbuff = skb->data + IPFIELD_ALIGN_OFFSET;
732                 recvtype = le32_to_cpu(pkt[0]);
733                 lbs_deb_usbd(&cardp->udev->dev,
734                             "Recv length = 0x%x, Recv type = 0x%X\n",
735                             recvlength, recvtype);
736         } else if (urb->status) {
737                 kfree_skb(skb);
738                 goto rx_exit;
739         }
740
741         switch (recvtype) {
742         case CMD_TYPE_DATA:
743                 process_cmdtypedata(recvlength, skb, cardp, priv);
744                 break;
745
746         case CMD_TYPE_REQUEST:
747                 process_cmdrequest(recvlength, recvbuff, skb, cardp, priv);
748                 break;
749
750         case CMD_TYPE_INDICATION:
751                 /* Event handling */
752                 event = le32_to_cpu(pkt[1]);
753                 lbs_deb_usbd(&cardp->udev->dev, "**EVENT** 0x%X\n", event);
754                 kfree_skb(skb);
755
756                 /* Icky undocumented magic special case */
757                 if (event & 0xffff0000) {
758                         u32 trycount = (event & 0xffff0000) >> 16;
759
760                         lbs_send_tx_feedback(priv, trycount);
761                 } else
762                         lbs_queue_event(priv, event & 0xFF);
763                 break;
764
765         default:
766                 lbs_deb_usbd(&cardp->udev->dev, "Unknown command type 0x%X\n",
767                              recvtype);
768                 kfree_skb(skb);
769                 break;
770         }
771
772 setup_for_next:
773         if_usb_submit_rx_urb(cardp);
774 rx_exit:
775         lbs_deb_leave(LBS_DEB_USB);
776 }
777
778 /**
779  *  @brief This function downloads data to FW
780  *  @param priv         pointer to struct lbs_private structure
781  *  @param type         type of data
782  *  @param buf          pointer to data buffer
783  *  @param len          number of bytes
784  *  @return             0 or -1
785  */
786 static int if_usb_host_to_card(struct lbs_private *priv, uint8_t type,
787                                uint8_t *payload, uint16_t nb)
788 {
789         struct if_usb_card *cardp = priv->card;
790
791         lbs_deb_usbd(&cardp->udev->dev,"*** type = %u\n", type);
792         lbs_deb_usbd(&cardp->udev->dev,"size after = %d\n", nb);
793
794         if (type == MVMS_CMD) {
795                 *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST);
796                 priv->dnld_sent = DNLD_CMD_SENT;
797         } else {
798                 *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_DATA);
799                 priv->dnld_sent = DNLD_DATA_SENT;
800         }
801
802         memcpy((cardp->ep_out_buf + MESSAGE_HEADER_LEN), payload, nb);
803
804         return usb_tx_block(cardp, cardp->ep_out_buf, nb + MESSAGE_HEADER_LEN);
805 }
806
807 /**
808  *  @brief This function issues Boot command to the Boot2 code
809  *  @param ivalue   1:Boot from FW by USB-Download
810  *                  2:Boot from FW in EEPROM
811  *  @return             0
812  */
813 static int if_usb_issue_boot_command(struct if_usb_card *cardp, int ivalue)
814 {
815         struct bootcmd *bootcmd = cardp->ep_out_buf;
816
817         /* Prepare command */
818         bootcmd->magic = cpu_to_le32(BOOT_CMD_MAGIC_NUMBER);
819         bootcmd->cmd = ivalue;
820         memset(bootcmd->pad, 0, sizeof(bootcmd->pad));
821
822         /* Issue command */
823         usb_tx_block(cardp, cardp->ep_out_buf, sizeof(*bootcmd));
824
825         return 0;
826 }
827
828
829 /**
830  *  @brief This function checks the validity of Boot2/FW image.
831  *
832  *  @param data              pointer to image
833  *         len               image length
834  *  @return     0 or -1
835  */
836 static int check_fwfile_format(const uint8_t *data, uint32_t totlen)
837 {
838         uint32_t bincmd, exit;
839         uint32_t blksize, offset, len;
840         int ret;
841
842         ret = 1;
843         exit = len = 0;
844
845         do {
846                 struct fwheader *fwh = (void *)data;
847
848                 bincmd = le32_to_cpu(fwh->dnldcmd);
849                 blksize = le32_to_cpu(fwh->datalength);
850                 switch (bincmd) {
851                 case FW_HAS_DATA_TO_RECV:
852                         offset = sizeof(struct fwheader) + blksize;
853                         data += offset;
854                         len += offset;
855                         if (len >= totlen)
856                                 exit = 1;
857                         break;
858                 case FW_HAS_LAST_BLOCK:
859                         exit = 1;
860                         ret = 0;
861                         break;
862                 default:
863                         exit = 1;
864                         break;
865                 }
866         } while (!exit);
867
868         if (ret)
869                 lbs_pr_err("firmware file format check FAIL\n");
870         else
871                 lbs_deb_fw("firmware file format check PASS\n");
872
873         return ret;
874 }
875
876
877 /**
878 *  @brief This function programs the firmware subject to cmd
879 *
880 *  @param cardp             the if_usb_card descriptor
881 *         fwname            firmware or boot2 image file name
882 *         cmd               either BOOT_CMD_FW_BY_USB, BOOT_CMD_UPDATE_FW,
883 *                           or BOOT_CMD_UPDATE_BOOT2.
884 *  @return     0 or error code
885 */
886 static int if_usb_prog_firmware(struct if_usb_card *cardp,
887                                 const char *fwname, int cmd)
888 {
889         struct lbs_private *priv = cardp->priv;
890         unsigned long flags, caps;
891         int ret;
892
893         caps = priv->fwcapinfo;
894         if (((cmd == BOOT_CMD_UPDATE_FW) && !(caps & FW_CAPINFO_FIRMWARE_UPGRADE)) ||
895             ((cmd == BOOT_CMD_UPDATE_BOOT2) && !(caps & FW_CAPINFO_BOOT2_UPGRADE)))
896                 return -EOPNOTSUPP;
897
898         /* Ensure main thread is idle. */
899         spin_lock_irqsave(&priv->driver_lock, flags);
900         while (priv->cur_cmd != NULL || priv->dnld_sent != DNLD_RES_RECEIVED) {
901                 spin_unlock_irqrestore(&priv->driver_lock, flags);
902                 if (wait_event_interruptible(priv->waitq,
903                                 (priv->cur_cmd == NULL &&
904                                 priv->dnld_sent == DNLD_RES_RECEIVED))) {
905                         return -ERESTARTSYS;
906                 }
907                 spin_lock_irqsave(&priv->driver_lock, flags);
908         }
909         priv->dnld_sent = DNLD_BOOTCMD_SENT;
910         spin_unlock_irqrestore(&priv->driver_lock, flags);
911
912         ret = __if_usb_prog_firmware(cardp, fwname, cmd);
913
914         spin_lock_irqsave(&priv->driver_lock, flags);
915         priv->dnld_sent = DNLD_RES_RECEIVED;
916         spin_unlock_irqrestore(&priv->driver_lock, flags);
917
918         wake_up_interruptible(&priv->waitq);
919
920         return ret;
921 }
922
923 static int __if_usb_prog_firmware(struct if_usb_card *cardp,
924                                         const char *fwname, int cmd)
925 {
926         int i = 0;
927         static int reset_count = 10;
928         int ret = 0;
929
930         lbs_deb_enter(LBS_DEB_USB);
931
932         ret = request_firmware(&cardp->fw, fwname, &cardp->udev->dev);
933         if (ret < 0) {
934                 lbs_pr_err("request_firmware() failed with %#x\n", ret);
935                 lbs_pr_err("firmware %s not found\n", fwname);
936                 goto done;
937         }
938
939         if (check_fwfile_format(cardp->fw->data, cardp->fw->size)) {
940                 ret = -EINVAL;
941                 goto release_fw;
942         }
943
944         /* Cancel any pending usb business */
945         usb_kill_urb(cardp->rx_urb);
946         usb_kill_urb(cardp->tx_urb);
947
948         cardp->fwlastblksent = 0;
949         cardp->fwdnldover = 0;
950         cardp->totalbytes = 0;
951         cardp->fwfinalblk = 0;
952         cardp->bootcmdresp = 0;
953
954 restart:
955         if (if_usb_submit_rx_urb_fwload(cardp) < 0) {
956                 lbs_deb_usbd(&cardp->udev->dev, "URB submission is failed\n");
957                 ret = -EIO;
958                 goto release_fw;
959         }
960
961         cardp->bootcmdresp = 0;
962         do {
963                 int j = 0;
964                 i++;
965                 if_usb_issue_boot_command(cardp, cmd);
966                 /* wait for command response */
967                 do {
968                         j++;
969                         msleep_interruptible(100);
970                 } while (cardp->bootcmdresp == 0 && j < 10);
971         } while (cardp->bootcmdresp == 0 && i < 5);
972
973         if (cardp->bootcmdresp == BOOT_CMD_RESP_NOT_SUPPORTED) {
974                 /* Return to normal operation */
975                 ret = -EOPNOTSUPP;
976                 usb_kill_urb(cardp->rx_urb);
977                 usb_kill_urb(cardp->tx_urb);
978                 if (if_usb_submit_rx_urb(cardp) < 0)
979                         ret = -EIO;
980                 goto release_fw;
981         } else if (cardp->bootcmdresp <= 0) {
982                 if (--reset_count >= 0) {
983                         if_usb_reset_device(cardp);
984                         goto restart;
985                 }
986                 ret = -EIO;
987                 goto release_fw;
988         }
989
990         i = 0;
991
992         cardp->totalbytes = 0;
993         cardp->fwlastblksent = 0;
994         cardp->CRC_OK = 1;
995         cardp->fwdnldover = 0;
996         cardp->fwseqnum = -1;
997         cardp->totalbytes = 0;
998         cardp->fwfinalblk = 0;
999
1000         /* Send the first firmware packet... */
1001         if_usb_send_fw_pkt(cardp);
1002
1003         /* ... and wait for the process to complete */
1004         wait_event_interruptible(cardp->fw_wq, cardp->surprise_removed || cardp->fwdnldover);
1005
1006         del_timer_sync(&cardp->fw_timeout);
1007         usb_kill_urb(cardp->rx_urb);
1008
1009         if (!cardp->fwdnldover) {
1010                 lbs_pr_info("failed to load fw, resetting device!\n");
1011                 if (--reset_count >= 0) {
1012                         if_usb_reset_device(cardp);
1013                         goto restart;
1014                 }
1015
1016                 lbs_pr_info("FW download failure, time = %d ms\n", i * 100);
1017                 ret = -EIO;
1018                 goto release_fw;
1019         }
1020
1021  release_fw:
1022         release_firmware(cardp->fw);
1023         cardp->fw = NULL;
1024
1025  done:
1026         lbs_deb_leave_args(LBS_DEB_USB, "ret %d", ret);
1027         return ret;
1028 }
1029
1030
1031 #ifdef CONFIG_PM
1032 static int if_usb_suspend(struct usb_interface *intf, pm_message_t message)
1033 {
1034         struct if_usb_card *cardp = usb_get_intfdata(intf);
1035         struct lbs_private *priv = cardp->priv;
1036         int ret;
1037
1038         lbs_deb_enter(LBS_DEB_USB);
1039
1040         if (priv->psstate != PS_STATE_FULL_POWER)
1041                 return -1;
1042
1043         ret = lbs_suspend(priv);
1044         if (ret)
1045                 goto out;
1046
1047         /* Unlink tx & rx urb */
1048         usb_kill_urb(cardp->tx_urb);
1049         usb_kill_urb(cardp->rx_urb);
1050
1051  out:
1052         lbs_deb_leave(LBS_DEB_USB);
1053         return ret;
1054 }
1055
1056 static int if_usb_resume(struct usb_interface *intf)
1057 {
1058         struct if_usb_card *cardp = usb_get_intfdata(intf);
1059         struct lbs_private *priv = cardp->priv;
1060
1061         lbs_deb_enter(LBS_DEB_USB);
1062
1063         if_usb_submit_rx_urb(cardp);
1064
1065         lbs_resume(priv);
1066
1067         lbs_deb_leave(LBS_DEB_USB);
1068         return 0;
1069 }
1070 #else
1071 #define if_usb_suspend NULL
1072 #define if_usb_resume NULL
1073 #endif
1074
1075 static struct usb_driver if_usb_driver = {
1076         .name = DRV_NAME,
1077         .probe = if_usb_probe,
1078         .disconnect = if_usb_disconnect,
1079         .id_table = if_usb_table,
1080         .suspend = if_usb_suspend,
1081         .resume = if_usb_resume,
1082         .reset_resume = if_usb_resume,
1083 };
1084
1085 static int __init if_usb_init_module(void)
1086 {
1087         int ret = 0;
1088
1089         lbs_deb_enter(LBS_DEB_MAIN);
1090
1091         ret = usb_register(&if_usb_driver);
1092
1093         lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
1094         return ret;
1095 }
1096
1097 static void __exit if_usb_exit_module(void)
1098 {
1099         lbs_deb_enter(LBS_DEB_MAIN);
1100
1101         usb_deregister(&if_usb_driver);
1102
1103         lbs_deb_leave(LBS_DEB_MAIN);
1104 }
1105
1106 module_init(if_usb_init_module);
1107 module_exit(if_usb_exit_module);
1108
1109 MODULE_DESCRIPTION("8388 USB WLAN Driver");
1110 MODULE_AUTHOR("Marvell International Ltd. and Red Hat, Inc.");
1111 MODULE_LICENSE("GPL");