Merge branch 'wl12xx-next' into for-linville
[pandora-kernel.git] / drivers / net / wireless / iwlwifi / iwl-agn.c
1 /******************************************************************************
2  *
3  * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
4  *
5  * Portions of this file are derived from the ipw3945 project, as well
6  * as portions of the ieee80211 subsystem header files.
7  *
8  * This program is free software; you can redistribute it and/or modify it
9  * under the terms of version 2 of the GNU General Public License as
10  * published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful, but WITHOUT
13  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
15  * more details.
16  *
17  * You should have received a copy of the GNU General Public License along with
18  * this program; if not, write to the Free Software Foundation, Inc.,
19  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
20  *
21  * The full GNU General Public License is included in this distribution in the
22  * file called LICENSE.
23  *
24  * Contact Information:
25  *  Intel Linux Wireless <ilw@linux.intel.com>
26  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27  *
28  *****************************************************************************/
29 #include <linux/kernel.h>
30 #include <linux/module.h>
31 #include <linux/init.h>
32 #include <linux/slab.h>
33 #include <linux/delay.h>
34 #include <linux/sched.h>
35 #include <linux/skbuff.h>
36 #include <linux/netdevice.h>
37 #include <linux/etherdevice.h>
38 #include <linux/if_arp.h>
39
40 #include <net/mac80211.h>
41
42 #include <asm/div64.h>
43
44 #include "iwl-eeprom.h"
45 #include "iwl-dev.h"
46 #include "iwl-core.h"
47 #include "iwl-io.h"
48 #include "iwl-agn-calib.h"
49 #include "iwl-agn.h"
50 #include "iwl-shared.h"
51 #include "iwl-trans.h"
52 #include "iwl-op-mode.h"
53
54 /******************************************************************************
55  *
56  * module boiler plate
57  *
58  ******************************************************************************/
59
60 /*
61  * module name, copyright, version, etc.
62  */
63 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
64
65 #ifdef CONFIG_IWLWIFI_DEBUG
66 #define VD "d"
67 #else
68 #define VD
69 #endif
70
71 #define DRV_VERSION     IWLWIFI_VERSION VD
72
73
74 MODULE_DESCRIPTION(DRV_DESCRIPTION);
75 MODULE_VERSION(DRV_VERSION);
76 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
77 MODULE_LICENSE("GPL");
78 MODULE_ALIAS("iwlagn");
79
80 void iwl_update_chain_flags(struct iwl_priv *priv)
81 {
82         struct iwl_rxon_context *ctx;
83
84         for_each_context(priv, ctx) {
85                 iwlagn_set_rxon_chain(priv, ctx);
86                 if (ctx->active.rx_chain != ctx->staging.rx_chain)
87                         iwlagn_commit_rxon(priv, ctx);
88         }
89 }
90
91 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
92 static void iwl_set_beacon_tim(struct iwl_priv *priv,
93                                struct iwl_tx_beacon_cmd *tx_beacon_cmd,
94                                u8 *beacon, u32 frame_size)
95 {
96         u16 tim_idx;
97         struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
98
99         /*
100          * The index is relative to frame start but we start looking at the
101          * variable-length part of the beacon.
102          */
103         tim_idx = mgmt->u.beacon.variable - beacon;
104
105         /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
106         while ((tim_idx < (frame_size - 2)) &&
107                         (beacon[tim_idx] != WLAN_EID_TIM))
108                 tim_idx += beacon[tim_idx+1] + 2;
109
110         /* If TIM field was found, set variables */
111         if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
112                 tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
113                 tx_beacon_cmd->tim_size = beacon[tim_idx+1];
114         } else
115                 IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
116 }
117
118 int iwlagn_send_beacon_cmd(struct iwl_priv *priv)
119 {
120         struct iwl_tx_beacon_cmd *tx_beacon_cmd;
121         struct iwl_host_cmd cmd = {
122                 .id = REPLY_TX_BEACON,
123                 .flags = CMD_SYNC,
124         };
125         struct ieee80211_tx_info *info;
126         u32 frame_size;
127         u32 rate_flags;
128         u32 rate;
129
130         /*
131          * We have to set up the TX command, the TX Beacon command, and the
132          * beacon contents.
133          */
134
135         lockdep_assert_held(&priv->mutex);
136
137         if (!priv->beacon_ctx) {
138                 IWL_ERR(priv, "trying to build beacon w/o beacon context!\n");
139                 return 0;
140         }
141
142         if (WARN_ON(!priv->beacon_skb))
143                 return -EINVAL;
144
145         /* Allocate beacon command */
146         if (!priv->beacon_cmd)
147                 priv->beacon_cmd = kzalloc(sizeof(*tx_beacon_cmd), GFP_KERNEL);
148         tx_beacon_cmd = priv->beacon_cmd;
149         if (!tx_beacon_cmd)
150                 return -ENOMEM;
151
152         frame_size = priv->beacon_skb->len;
153
154         /* Set up TX command fields */
155         tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
156         tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id;
157         tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
158         tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
159                 TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
160
161         /* Set up TX beacon command fields */
162         iwl_set_beacon_tim(priv, tx_beacon_cmd, priv->beacon_skb->data,
163                            frame_size);
164
165         /* Set up packet rate and flags */
166         info = IEEE80211_SKB_CB(priv->beacon_skb);
167
168         /*
169          * Let's set up the rate at least somewhat correctly;
170          * it will currently not actually be used by the uCode,
171          * it uses the broadcast station's rate instead.
172          */
173         if (info->control.rates[0].idx < 0 ||
174             info->control.rates[0].flags & IEEE80211_TX_RC_MCS)
175                 rate = 0;
176         else
177                 rate = info->control.rates[0].idx;
178
179         priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
180                                               hw_params(priv).valid_tx_ant);
181         rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
182
183         /* In mac80211, rates for 5 GHz start at 0 */
184         if (info->band == IEEE80211_BAND_5GHZ)
185                 rate += IWL_FIRST_OFDM_RATE;
186         else if (rate >= IWL_FIRST_CCK_RATE && rate <= IWL_LAST_CCK_RATE)
187                 rate_flags |= RATE_MCS_CCK_MSK;
188
189         tx_beacon_cmd->tx.rate_n_flags =
190                         iwl_hw_set_rate_n_flags(rate, rate_flags);
191
192         /* Submit command */
193         cmd.len[0] = sizeof(*tx_beacon_cmd);
194         cmd.data[0] = tx_beacon_cmd;
195         cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
196         cmd.len[1] = frame_size;
197         cmd.data[1] = priv->beacon_skb->data;
198         cmd.dataflags[1] = IWL_HCMD_DFL_NOCOPY;
199
200         return iwl_dvm_send_cmd(priv, &cmd);
201 }
202
203 static void iwl_bg_beacon_update(struct work_struct *work)
204 {
205         struct iwl_priv *priv =
206                 container_of(work, struct iwl_priv, beacon_update);
207         struct sk_buff *beacon;
208
209         mutex_lock(&priv->mutex);
210         if (!priv->beacon_ctx) {
211                 IWL_ERR(priv, "updating beacon w/o beacon context!\n");
212                 goto out;
213         }
214
215         if (priv->beacon_ctx->vif->type != NL80211_IFTYPE_AP) {
216                 /*
217                  * The ucode will send beacon notifications even in
218                  * IBSS mode, but we don't want to process them. But
219                  * we need to defer the type check to here due to
220                  * requiring locking around the beacon_ctx access.
221                  */
222                 goto out;
223         }
224
225         /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
226         beacon = ieee80211_beacon_get(priv->hw, priv->beacon_ctx->vif);
227         if (!beacon) {
228                 IWL_ERR(priv, "update beacon failed -- keeping old\n");
229                 goto out;
230         }
231
232         /* new beacon skb is allocated every time; dispose previous.*/
233         dev_kfree_skb(priv->beacon_skb);
234
235         priv->beacon_skb = beacon;
236
237         iwlagn_send_beacon_cmd(priv);
238  out:
239         mutex_unlock(&priv->mutex);
240 }
241
242 static void iwl_bg_bt_runtime_config(struct work_struct *work)
243 {
244         struct iwl_priv *priv =
245                 container_of(work, struct iwl_priv, bt_runtime_config);
246
247         if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
248                 return;
249
250         /* dont send host command if rf-kill is on */
251         if (!iwl_is_ready_rf(priv->shrd))
252                 return;
253         iwlagn_send_advance_bt_config(priv);
254 }
255
256 static void iwl_bg_bt_full_concurrency(struct work_struct *work)
257 {
258         struct iwl_priv *priv =
259                 container_of(work, struct iwl_priv, bt_full_concurrency);
260         struct iwl_rxon_context *ctx;
261
262         mutex_lock(&priv->mutex);
263
264         if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
265                 goto out;
266
267         /* dont send host command if rf-kill is on */
268         if (!iwl_is_ready_rf(priv->shrd))
269                 goto out;
270
271         IWL_DEBUG_INFO(priv, "BT coex in %s mode\n",
272                        priv->bt_full_concurrent ?
273                        "full concurrency" : "3-wire");
274
275         /*
276          * LQ & RXON updated cmds must be sent before BT Config cmd
277          * to avoid 3-wire collisions
278          */
279         for_each_context(priv, ctx) {
280                 iwlagn_set_rxon_chain(priv, ctx);
281                 iwlagn_commit_rxon(priv, ctx);
282         }
283
284         iwlagn_send_advance_bt_config(priv);
285 out:
286         mutex_unlock(&priv->mutex);
287 }
288
289 /**
290  * iwl_bg_statistics_periodic - Timer callback to queue statistics
291  *
292  * This callback is provided in order to send a statistics request.
293  *
294  * This timer function is continually reset to execute within
295  * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
296  * was received.  We need to ensure we receive the statistics in order
297  * to update the temperature used for calibrating the TXPOWER.
298  */
299 static void iwl_bg_statistics_periodic(unsigned long data)
300 {
301         struct iwl_priv *priv = (struct iwl_priv *)data;
302
303         if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
304                 return;
305
306         /* dont send host command if rf-kill is on */
307         if (!iwl_is_ready_rf(priv->shrd))
308                 return;
309
310         iwl_send_statistics_request(priv, CMD_ASYNC, false);
311 }
312
313
314 static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
315                                         u32 start_idx, u32 num_events,
316                                         u32 capacity, u32 mode)
317 {
318         u32 i;
319         u32 ptr;        /* SRAM byte address of log data */
320         u32 ev, time, data; /* event log data */
321         unsigned long reg_flags;
322
323         if (mode == 0)
324                 ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32));
325         else
326                 ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32));
327
328         /* Make sure device is powered up for SRAM reads */
329         spin_lock_irqsave(&trans(priv)->reg_lock, reg_flags);
330         if (iwl_grab_nic_access(trans(priv))) {
331                 spin_unlock_irqrestore(&trans(priv)->reg_lock, reg_flags);
332                 return;
333         }
334
335         /* Set starting address; reads will auto-increment */
336         iwl_write32(trans(priv), HBUS_TARG_MEM_RADDR, ptr);
337         rmb();
338
339         /*
340          * Refuse to read more than would have fit into the log from
341          * the current start_idx. This used to happen due to the race
342          * described below, but now WARN because the code below should
343          * prevent it from happening here.
344          */
345         if (WARN_ON(num_events > capacity - start_idx))
346                 num_events = capacity - start_idx;
347
348         /*
349          * "time" is actually "data" for mode 0 (no timestamp).
350          * place event id # at far right for easier visual parsing.
351          */
352         for (i = 0; i < num_events; i++) {
353                 ev = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT);
354                 time = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT);
355                 if (mode == 0) {
356                         trace_iwlwifi_dev_ucode_cont_event(
357                                         trans(priv)->dev, 0, time, ev);
358                 } else {
359                         data = iwl_read32(trans(priv), HBUS_TARG_MEM_RDAT);
360                         trace_iwlwifi_dev_ucode_cont_event(
361                                         trans(priv)->dev, time, data, ev);
362                 }
363         }
364         /* Allow device to power down */
365         iwl_release_nic_access(trans(priv));
366         spin_unlock_irqrestore(&trans(priv)->reg_lock, reg_flags);
367 }
368
369 static void iwl_continuous_event_trace(struct iwl_priv *priv)
370 {
371         u32 capacity;   /* event log capacity in # entries */
372         struct {
373                 u32 capacity;
374                 u32 mode;
375                 u32 wrap_counter;
376                 u32 write_counter;
377         } __packed read;
378         u32 base;       /* SRAM byte address of event log header */
379         u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
380         u32 num_wraps;  /* # times uCode wrapped to top of log */
381         u32 next_entry; /* index of next entry to be written by uCode */
382
383         base = priv->shrd->device_pointers.log_event_table;
384         if (iwlagn_hw_valid_rtc_data_addr(base)) {
385                 iwl_read_targ_mem_words(trans(priv), base, &read, sizeof(read));
386
387                 capacity = read.capacity;
388                 mode = read.mode;
389                 num_wraps = read.wrap_counter;
390                 next_entry = read.write_counter;
391         } else
392                 return;
393
394         /*
395          * Unfortunately, the uCode doesn't use temporary variables.
396          * Therefore, it can happen that we read next_entry == capacity,
397          * which really means next_entry == 0.
398          */
399         if (unlikely(next_entry == capacity))
400                 next_entry = 0;
401         /*
402          * Additionally, the uCode increases the write pointer before
403          * the wraps counter, so if the write pointer is smaller than
404          * the old write pointer (wrap occurred) but we read that no
405          * wrap occurred, we actually read between the next_entry and
406          * num_wraps update (this does happen in practice!!) -- take
407          * that into account by increasing num_wraps.
408          */
409         if (unlikely(next_entry < priv->event_log.next_entry &&
410                      num_wraps == priv->event_log.num_wraps))
411                 num_wraps++;
412
413         if (num_wraps == priv->event_log.num_wraps) {
414                 iwl_print_cont_event_trace(
415                         priv, base, priv->event_log.next_entry,
416                         next_entry - priv->event_log.next_entry,
417                         capacity, mode);
418
419                 priv->event_log.non_wraps_count++;
420         } else {
421                 if (num_wraps - priv->event_log.num_wraps > 1)
422                         priv->event_log.wraps_more_count++;
423                 else
424                         priv->event_log.wraps_once_count++;
425
426                 trace_iwlwifi_dev_ucode_wrap_event(trans(priv)->dev,
427                                 num_wraps - priv->event_log.num_wraps,
428                                 next_entry, priv->event_log.next_entry);
429
430                 if (next_entry < priv->event_log.next_entry) {
431                         iwl_print_cont_event_trace(
432                                 priv, base, priv->event_log.next_entry,
433                                 capacity - priv->event_log.next_entry,
434                                 capacity, mode);
435
436                         iwl_print_cont_event_trace(
437                                 priv, base, 0, next_entry, capacity, mode);
438                 } else {
439                         iwl_print_cont_event_trace(
440                                 priv, base, next_entry,
441                                 capacity - next_entry,
442                                 capacity, mode);
443
444                         iwl_print_cont_event_trace(
445                                 priv, base, 0, next_entry, capacity, mode);
446                 }
447         }
448
449         priv->event_log.num_wraps = num_wraps;
450         priv->event_log.next_entry = next_entry;
451 }
452
453 /**
454  * iwl_bg_ucode_trace - Timer callback to log ucode event
455  *
456  * The timer is continually set to execute every
457  * UCODE_TRACE_PERIOD milliseconds after the last timer expired
458  * this function is to perform continuous uCode event logging operation
459  * if enabled
460  */
461 static void iwl_bg_ucode_trace(unsigned long data)
462 {
463         struct iwl_priv *priv = (struct iwl_priv *)data;
464
465         if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
466                 return;
467
468         if (priv->event_log.ucode_trace) {
469                 iwl_continuous_event_trace(priv);
470                 /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
471                 mod_timer(&priv->ucode_trace,
472                          jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
473         }
474 }
475
476 static void iwl_bg_tx_flush(struct work_struct *work)
477 {
478         struct iwl_priv *priv =
479                 container_of(work, struct iwl_priv, tx_flush);
480
481         if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
482                 return;
483
484         /* do nothing if rf-kill is on */
485         if (!iwl_is_ready_rf(priv->shrd))
486                 return;
487
488         IWL_DEBUG_INFO(priv, "device request: flush all tx frames\n");
489         iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL);
490 }
491
492 void iwl_init_context(struct iwl_priv *priv, u32 ucode_flags)
493 {
494         int i;
495
496         /*
497          * The default context is always valid,
498          * the PAN context depends on uCode.
499          */
500         priv->shrd->valid_contexts = BIT(IWL_RXON_CTX_BSS);
501         if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN)
502                 priv->shrd->valid_contexts |= BIT(IWL_RXON_CTX_PAN);
503
504         for (i = 0; i < NUM_IWL_RXON_CTX; i++)
505                 priv->contexts[i].ctxid = i;
506
507         priv->contexts[IWL_RXON_CTX_BSS].always_active = true;
508         priv->contexts[IWL_RXON_CTX_BSS].is_active = true;
509         priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON;
510         priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING;
511         priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC;
512         priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM;
513         priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID;
514         priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY;
515         priv->contexts[IWL_RXON_CTX_BSS].bcast_sta_id = IWLAGN_BROADCAST_ID;
516         priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes =
517                 BIT(NL80211_IFTYPE_ADHOC);
518         priv->contexts[IWL_RXON_CTX_BSS].interface_modes =
519                 BIT(NL80211_IFTYPE_STATION);
520         priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP;
521         priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS;
522         priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS;
523         priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS;
524
525         priv->contexts[IWL_RXON_CTX_PAN].rxon_cmd = REPLY_WIPAN_RXON;
526         priv->contexts[IWL_RXON_CTX_PAN].rxon_timing_cmd =
527                 REPLY_WIPAN_RXON_TIMING;
528         priv->contexts[IWL_RXON_CTX_PAN].rxon_assoc_cmd =
529                 REPLY_WIPAN_RXON_ASSOC;
530         priv->contexts[IWL_RXON_CTX_PAN].qos_cmd = REPLY_WIPAN_QOS_PARAM;
531         priv->contexts[IWL_RXON_CTX_PAN].ap_sta_id = IWL_AP_ID_PAN;
532         priv->contexts[IWL_RXON_CTX_PAN].wep_key_cmd = REPLY_WIPAN_WEPKEY;
533         priv->contexts[IWL_RXON_CTX_PAN].bcast_sta_id = IWLAGN_PAN_BCAST_ID;
534         priv->contexts[IWL_RXON_CTX_PAN].station_flags = STA_FLG_PAN_STATION;
535         priv->contexts[IWL_RXON_CTX_PAN].interface_modes =
536                 BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP);
537
538         if (ucode_flags & IWL_UCODE_TLV_FLAGS_P2P)
539                 priv->contexts[IWL_RXON_CTX_PAN].interface_modes |=
540                         BIT(NL80211_IFTYPE_P2P_CLIENT) |
541                         BIT(NL80211_IFTYPE_P2P_GO);
542
543         priv->contexts[IWL_RXON_CTX_PAN].ap_devtype = RXON_DEV_TYPE_CP;
544         priv->contexts[IWL_RXON_CTX_PAN].station_devtype = RXON_DEV_TYPE_2STA;
545         priv->contexts[IWL_RXON_CTX_PAN].unused_devtype = RXON_DEV_TYPE_P2P;
546
547         BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
548 }
549
550 static void iwl_rf_kill_ct_config(struct iwl_priv *priv)
551 {
552         struct iwl_ct_kill_config cmd;
553         struct iwl_ct_kill_throttling_config adv_cmd;
554         int ret = 0;
555
556         iwl_write32(trans(priv), CSR_UCODE_DRV_GP1_CLR,
557                     CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
558
559         priv->thermal_throttle.ct_kill_toggle = false;
560
561         if (cfg(priv)->base_params->support_ct_kill_exit) {
562                 adv_cmd.critical_temperature_enter =
563                         cpu_to_le32(hw_params(priv).ct_kill_threshold);
564                 adv_cmd.critical_temperature_exit =
565                         cpu_to_le32(hw_params(priv).ct_kill_exit_threshold);
566
567                 ret = iwl_dvm_send_cmd_pdu(priv,
568                                        REPLY_CT_KILL_CONFIG_CMD,
569                                        CMD_SYNC, sizeof(adv_cmd), &adv_cmd);
570                 if (ret)
571                         IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
572                 else
573                         IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
574                                 "succeeded, critical temperature enter is %d,"
575                                 "exit is %d\n",
576                                 hw_params(priv).ct_kill_threshold,
577                                 hw_params(priv).ct_kill_exit_threshold);
578         } else {
579                 cmd.critical_temperature_R =
580                         cpu_to_le32(hw_params(priv).ct_kill_threshold);
581
582                 ret = iwl_dvm_send_cmd_pdu(priv,
583                                        REPLY_CT_KILL_CONFIG_CMD,
584                                        CMD_SYNC, sizeof(cmd), &cmd);
585                 if (ret)
586                         IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
587                 else
588                         IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
589                                 "succeeded, "
590                                 "critical temperature is %d\n",
591                                 hw_params(priv).ct_kill_threshold);
592         }
593 }
594
595 static int iwlagn_send_calib_cfg_rt(struct iwl_priv *priv, u32 cfg)
596 {
597         struct iwl_calib_cfg_cmd calib_cfg_cmd;
598         struct iwl_host_cmd cmd = {
599                 .id = CALIBRATION_CFG_CMD,
600                 .len = { sizeof(struct iwl_calib_cfg_cmd), },
601                 .data = { &calib_cfg_cmd, },
602         };
603
604         memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd));
605         calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_RT_CFG_ALL;
606         calib_cfg_cmd.ucd_calib_cfg.once.start = cpu_to_le32(cfg);
607
608         return iwl_dvm_send_cmd(priv, &cmd);
609 }
610
611
612 static int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant)
613 {
614         struct iwl_tx_ant_config_cmd tx_ant_cmd = {
615           .valid = cpu_to_le32(valid_tx_ant),
616         };
617
618         if (IWL_UCODE_API(priv->fw->ucode_ver) > 1) {
619                 IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant);
620                 return iwl_dvm_send_cmd_pdu(priv,
621                                         TX_ANT_CONFIGURATION_CMD,
622                                         CMD_SYNC,
623                                         sizeof(struct iwl_tx_ant_config_cmd),
624                                         &tx_ant_cmd);
625         } else {
626                 IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n");
627                 return -EOPNOTSUPP;
628         }
629 }
630
631 /**
632  * iwl_alive_start - called after REPLY_ALIVE notification received
633  *                   from protocol/runtime uCode (initialization uCode's
634  *                   Alive gets handled by iwl_init_alive_start()).
635  */
636 int iwl_alive_start(struct iwl_priv *priv)
637 {
638         int ret = 0;
639         struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
640
641         IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
642
643         /* After the ALIVE response, we can send host commands to the uCode */
644         set_bit(STATUS_ALIVE, &priv->shrd->status);
645
646         /* Enable watchdog to monitor the driver tx queues */
647         iwl_setup_watchdog(priv);
648
649         if (iwl_is_rfkill(priv->shrd))
650                 return -ERFKILL;
651
652         if (priv->event_log.ucode_trace) {
653                 /* start collecting data now */
654                 mod_timer(&priv->ucode_trace, jiffies);
655         }
656
657         /* download priority table before any calibration request */
658         if (cfg(priv)->bt_params &&
659             cfg(priv)->bt_params->advanced_bt_coexist) {
660                 /* Configure Bluetooth device coexistence support */
661                 if (cfg(priv)->bt_params->bt_sco_disable)
662                         priv->bt_enable_pspoll = false;
663                 else
664                         priv->bt_enable_pspoll = true;
665
666                 priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
667                 priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
668                 priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
669                 iwlagn_send_advance_bt_config(priv);
670                 priv->bt_valid = IWLAGN_BT_VALID_ENABLE_FLAGS;
671                 priv->cur_rssi_ctx = NULL;
672
673                 iwl_send_prio_tbl(priv);
674
675                 /* FIXME: w/a to force change uCode BT state machine */
676                 ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
677                                          BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
678                 if (ret)
679                         return ret;
680                 ret = iwl_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE,
681                                          BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
682                 if (ret)
683                         return ret;
684         } else {
685                 /*
686                  * default is 2-wire BT coexexistence support
687                  */
688                 iwl_send_bt_config(priv);
689         }
690
691         /*
692          * Perform runtime calibrations, including DC calibration.
693          */
694         iwlagn_send_calib_cfg_rt(priv, IWL_CALIB_CFG_DC_IDX);
695
696         ieee80211_wake_queues(priv->hw);
697
698         priv->active_rate = IWL_RATES_MASK;
699
700         /* Configure Tx antenna selection based on H/W config */
701         iwlagn_send_tx_ant_config(priv, hw_params(priv).valid_tx_ant);
702
703         if (iwl_is_associated_ctx(ctx) && !priv->wowlan) {
704                 struct iwl_rxon_cmd *active_rxon =
705                                 (struct iwl_rxon_cmd *)&ctx->active;
706                 /* apply any changes in staging */
707                 ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
708                 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
709         } else {
710                 struct iwl_rxon_context *tmp;
711                 /* Initialize our rx_config data */
712                 for_each_context(priv, tmp)
713                         iwl_connection_init_rx_config(priv, tmp);
714
715                 iwlagn_set_rxon_chain(priv, ctx);
716         }
717
718         if (!priv->wowlan) {
719                 /* WoWLAN ucode will not reply in the same way, skip it */
720                 iwl_reset_run_time_calib(priv);
721         }
722
723         set_bit(STATUS_READY, &priv->shrd->status);
724
725         /* Configure the adapter for unassociated operation */
726         ret = iwlagn_commit_rxon(priv, ctx);
727         if (ret)
728                 return ret;
729
730         /* At this point, the NIC is initialized and operational */
731         iwl_rf_kill_ct_config(priv);
732
733         IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
734
735         return iwl_power_update_mode(priv, true);
736 }
737
738 /**
739  * iwl_clear_driver_stations - clear knowledge of all stations from driver
740  * @priv: iwl priv struct
741  *
742  * This is called during iwl_down() to make sure that in the case
743  * we're coming there from a hardware restart mac80211 will be
744  * able to reconfigure stations -- if we're getting there in the
745  * normal down flow then the stations will already be cleared.
746  */
747 static void iwl_clear_driver_stations(struct iwl_priv *priv)
748 {
749         struct iwl_rxon_context *ctx;
750
751         spin_lock_bh(&priv->sta_lock);
752         memset(priv->stations, 0, sizeof(priv->stations));
753         priv->num_stations = 0;
754
755         priv->ucode_key_table = 0;
756
757         for_each_context(priv, ctx) {
758                 /*
759                  * Remove all key information that is not stored as part
760                  * of station information since mac80211 may not have had
761                  * a chance to remove all the keys. When device is
762                  * reconfigured by mac80211 after an error all keys will
763                  * be reconfigured.
764                  */
765                 memset(ctx->wep_keys, 0, sizeof(ctx->wep_keys));
766                 ctx->key_mapping_keys = 0;
767         }
768
769         spin_unlock_bh(&priv->sta_lock);
770 }
771
772 void iwl_down(struct iwl_priv *priv)
773 {
774         int exit_pending;
775
776         IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
777
778         lockdep_assert_held(&priv->mutex);
779
780         iwl_scan_cancel_timeout(priv, 200);
781
782         /*
783          * If active, scanning won't cancel it, so say it expired.
784          * No race since we hold the mutex here and a new one
785          * can't come in at this time.
786          */
787         ieee80211_remain_on_channel_expired(priv->hw);
788
789         exit_pending =
790                 test_and_set_bit(STATUS_EXIT_PENDING, &priv->shrd->status);
791
792         /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
793          * to prevent rearm timer */
794         del_timer_sync(&priv->watchdog);
795
796         iwl_clear_ucode_stations(priv, NULL);
797         iwl_dealloc_bcast_stations(priv);
798         iwl_clear_driver_stations(priv);
799
800         /* reset BT coex data */
801         priv->bt_status = 0;
802         priv->cur_rssi_ctx = NULL;
803         priv->bt_is_sco = 0;
804         if (cfg(priv)->bt_params)
805                 priv->bt_traffic_load =
806                          cfg(priv)->bt_params->bt_init_traffic_load;
807         else
808                 priv->bt_traffic_load = 0;
809         priv->bt_full_concurrent = false;
810         priv->bt_ci_compliance = 0;
811
812         /* Wipe out the EXIT_PENDING status bit if we are not actually
813          * exiting the module */
814         if (!exit_pending)
815                 clear_bit(STATUS_EXIT_PENDING, &priv->shrd->status);
816
817         if (priv->mac80211_registered)
818                 ieee80211_stop_queues(priv->hw);
819
820         iwl_trans_stop_device(trans(priv));
821
822         /* Clear out all status bits but a few that are stable across reset */
823         priv->shrd->status &=
824                         test_bit(STATUS_RF_KILL_HW, &priv->shrd->status) <<
825                                 STATUS_RF_KILL_HW |
826                         test_bit(STATUS_GEO_CONFIGURED, &priv->shrd->status) <<
827                                 STATUS_GEO_CONFIGURED |
828                         test_bit(STATUS_FW_ERROR, &priv->shrd->status) <<
829                                 STATUS_FW_ERROR |
830                         test_bit(STATUS_EXIT_PENDING, &priv->shrd->status) <<
831                                 STATUS_EXIT_PENDING;
832
833         dev_kfree_skb(priv->beacon_skb);
834         priv->beacon_skb = NULL;
835 }
836
837 /*****************************************************************************
838  *
839  * Workqueue callbacks
840  *
841  *****************************************************************************/
842
843 static void iwl_bg_run_time_calib_work(struct work_struct *work)
844 {
845         struct iwl_priv *priv = container_of(work, struct iwl_priv,
846                         run_time_calib_work);
847
848         mutex_lock(&priv->mutex);
849
850         if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status) ||
851             test_bit(STATUS_SCANNING, &priv->shrd->status)) {
852                 mutex_unlock(&priv->mutex);
853                 return;
854         }
855
856         if (priv->start_calib) {
857                 iwl_chain_noise_calibration(priv);
858                 iwl_sensitivity_calibration(priv);
859         }
860
861         mutex_unlock(&priv->mutex);
862 }
863
864 void iwlagn_prepare_restart(struct iwl_priv *priv)
865 {
866         struct iwl_rxon_context *ctx;
867         bool bt_full_concurrent;
868         u8 bt_ci_compliance;
869         u8 bt_load;
870         u8 bt_status;
871         bool bt_is_sco;
872
873         lockdep_assert_held(&priv->mutex);
874
875         for_each_context(priv, ctx)
876                 ctx->vif = NULL;
877         priv->is_open = 0;
878
879         /*
880          * __iwl_down() will clear the BT status variables,
881          * which is correct, but when we restart we really
882          * want to keep them so restore them afterwards.
883          *
884          * The restart process will later pick them up and
885          * re-configure the hw when we reconfigure the BT
886          * command.
887          */
888         bt_full_concurrent = priv->bt_full_concurrent;
889         bt_ci_compliance = priv->bt_ci_compliance;
890         bt_load = priv->bt_traffic_load;
891         bt_status = priv->bt_status;
892         bt_is_sco = priv->bt_is_sco;
893
894         iwl_down(priv);
895
896         priv->bt_full_concurrent = bt_full_concurrent;
897         priv->bt_ci_compliance = bt_ci_compliance;
898         priv->bt_traffic_load = bt_load;
899         priv->bt_status = bt_status;
900         priv->bt_is_sco = bt_is_sco;
901 }
902
903 static void iwl_bg_restart(struct work_struct *data)
904 {
905         struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
906
907         if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
908                 return;
909
910         if (test_and_clear_bit(STATUS_FW_ERROR, &priv->shrd->status)) {
911                 mutex_lock(&priv->mutex);
912                 iwlagn_prepare_restart(priv);
913                 mutex_unlock(&priv->mutex);
914                 iwl_cancel_deferred_work(priv);
915                 ieee80211_restart_hw(priv->hw);
916         } else {
917                 WARN_ON(1);
918         }
919 }
920
921
922
923
924 void iwlagn_disable_roc(struct iwl_priv *priv)
925 {
926         struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN];
927
928         lockdep_assert_held(&priv->mutex);
929
930         if (!priv->hw_roc_setup)
931                 return;
932
933         ctx->staging.dev_type = RXON_DEV_TYPE_P2P;
934         ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
935
936         priv->hw_roc_channel = NULL;
937
938         memset(ctx->staging.node_addr, 0, ETH_ALEN);
939
940         iwlagn_commit_rxon(priv, ctx);
941
942         ctx->is_active = false;
943         priv->hw_roc_setup = false;
944 }
945
946 static void iwlagn_disable_roc_work(struct work_struct *work)
947 {
948         struct iwl_priv *priv = container_of(work, struct iwl_priv,
949                                              hw_roc_disable_work.work);
950
951         mutex_lock(&priv->mutex);
952         iwlagn_disable_roc(priv);
953         mutex_unlock(&priv->mutex);
954 }
955
956 /*****************************************************************************
957  *
958  * driver setup and teardown
959  *
960  *****************************************************************************/
961
962 static void iwl_setup_deferred_work(struct iwl_priv *priv)
963 {
964         priv->workqueue = create_singlethread_workqueue(DRV_NAME);
965
966         init_waitqueue_head(&priv->shrd->wait_command_queue);
967
968         INIT_WORK(&priv->restart, iwl_bg_restart);
969         INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
970         INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
971         INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush);
972         INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency);
973         INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config);
974         INIT_DELAYED_WORK(&priv->hw_roc_disable_work,
975                           iwlagn_disable_roc_work);
976
977         iwl_setup_scan_deferred_work(priv);
978
979         if (cfg(priv)->lib->bt_setup_deferred_work)
980                 cfg(priv)->lib->bt_setup_deferred_work(priv);
981
982         init_timer(&priv->statistics_periodic);
983         priv->statistics_periodic.data = (unsigned long)priv;
984         priv->statistics_periodic.function = iwl_bg_statistics_periodic;
985
986         init_timer(&priv->ucode_trace);
987         priv->ucode_trace.data = (unsigned long)priv;
988         priv->ucode_trace.function = iwl_bg_ucode_trace;
989
990         init_timer(&priv->watchdog);
991         priv->watchdog.data = (unsigned long)priv;
992         priv->watchdog.function = iwl_bg_watchdog;
993 }
994
995 void iwl_cancel_deferred_work(struct iwl_priv *priv)
996 {
997         if (cfg(priv)->lib->cancel_deferred_work)
998                 cfg(priv)->lib->cancel_deferred_work(priv);
999
1000         cancel_work_sync(&priv->run_time_calib_work);
1001         cancel_work_sync(&priv->beacon_update);
1002
1003         iwl_cancel_scan_deferred_work(priv);
1004
1005         cancel_work_sync(&priv->bt_full_concurrency);
1006         cancel_work_sync(&priv->bt_runtime_config);
1007         cancel_delayed_work_sync(&priv->hw_roc_disable_work);
1008
1009         del_timer_sync(&priv->statistics_periodic);
1010         del_timer_sync(&priv->ucode_trace);
1011 }
1012
1013 static void iwl_init_hw_rates(struct iwl_priv *priv,
1014                               struct ieee80211_rate *rates)
1015 {
1016         int i;
1017
1018         for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
1019                 rates[i].bitrate = iwl_rates[i].ieee * 5;
1020                 rates[i].hw_value = i; /* Rate scaling will work on indexes */
1021                 rates[i].hw_value_short = i;
1022                 rates[i].flags = 0;
1023                 if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
1024                         /*
1025                          * If CCK != 1M then set short preamble rate flag.
1026                          */
1027                         rates[i].flags |=
1028                                 (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
1029                                         0 : IEEE80211_RATE_SHORT_PREAMBLE;
1030                 }
1031         }
1032 }
1033
1034 static int iwl_init_drv(struct iwl_priv *priv)
1035 {
1036         int ret;
1037
1038         spin_lock_init(&priv->sta_lock);
1039
1040         mutex_init(&priv->mutex);
1041
1042         INIT_LIST_HEAD(&priv->calib_results);
1043
1044         priv->ieee_channels = NULL;
1045         priv->ieee_rates = NULL;
1046         priv->band = IEEE80211_BAND_2GHZ;
1047
1048         priv->plcp_delta_threshold =
1049                 cfg(priv)->base_params->plcp_delta_threshold;
1050
1051         priv->iw_mode = NL80211_IFTYPE_STATION;
1052         priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
1053         priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
1054         priv->agg_tids_count = 0;
1055
1056         priv->ucode_owner = IWL_OWNERSHIP_DRIVER;
1057
1058         /* initialize force reset */
1059         priv->force_reset[IWL_RF_RESET].reset_duration =
1060                 IWL_DELAY_NEXT_FORCE_RF_RESET;
1061         priv->force_reset[IWL_FW_RESET].reset_duration =
1062                 IWL_DELAY_NEXT_FORCE_FW_RELOAD;
1063
1064         priv->rx_statistics_jiffies = jiffies;
1065
1066         /* Choose which receivers/antennas to use */
1067         iwlagn_set_rxon_chain(priv, &priv->contexts[IWL_RXON_CTX_BSS]);
1068
1069         iwl_init_scan_params(priv);
1070
1071         /* init bt coex */
1072         if (cfg(priv)->bt_params &&
1073             cfg(priv)->bt_params->advanced_bt_coexist) {
1074                 priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
1075                 priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
1076                 priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
1077                 priv->bt_on_thresh = BT_ON_THRESHOLD_DEF;
1078                 priv->bt_duration = BT_DURATION_LIMIT_DEF;
1079                 priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF;
1080         }
1081
1082         ret = iwl_init_channel_map(priv);
1083         if (ret) {
1084                 IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
1085                 goto err;
1086         }
1087
1088         ret = iwl_init_geos(priv);
1089         if (ret) {
1090                 IWL_ERR(priv, "initializing geos failed: %d\n", ret);
1091                 goto err_free_channel_map;
1092         }
1093         iwl_init_hw_rates(priv, priv->ieee_rates);
1094
1095         return 0;
1096
1097 err_free_channel_map:
1098         iwl_free_channel_map(priv);
1099 err:
1100         return ret;
1101 }
1102
1103 static void iwl_uninit_drv(struct iwl_priv *priv)
1104 {
1105         iwl_free_geos(priv);
1106         iwl_free_channel_map(priv);
1107         if (priv->tx_cmd_pool)
1108                 kmem_cache_destroy(priv->tx_cmd_pool);
1109         kfree(priv->scan_cmd);
1110         kfree(priv->beacon_cmd);
1111         kfree(rcu_dereference_raw(priv->noa_data));
1112         iwl_calib_free_results(priv);
1113 #ifdef CONFIG_IWLWIFI_DEBUGFS
1114         kfree(priv->wowlan_sram);
1115 #endif
1116 }
1117
1118 /* Size of one Rx buffer in host DRAM */
1119 #define IWL_RX_BUF_SIZE_4K (4 * 1024)
1120 #define IWL_RX_BUF_SIZE_8K (8 * 1024)
1121
1122 static void iwl_set_hw_params(struct iwl_priv *priv)
1123 {
1124         if (cfg(priv)->ht_params)
1125                 hw_params(priv).use_rts_for_aggregation =
1126                         cfg(priv)->ht_params->use_rts_for_aggregation;
1127
1128         if (iwlagn_mod_params.amsdu_size_8K)
1129                 hw_params(priv).rx_page_order =
1130                         get_order(IWL_RX_BUF_SIZE_8K);
1131         else
1132                 hw_params(priv).rx_page_order =
1133                         get_order(IWL_RX_BUF_SIZE_4K);
1134
1135         if (iwlagn_mod_params.disable_11n & IWL_DISABLE_HT_ALL)
1136                 hw_params(priv).sku &= ~EEPROM_SKU_CAP_11N_ENABLE;
1137
1138         hw_params(priv).num_ampdu_queues =
1139                 cfg(priv)->base_params->num_of_ampdu_queues;
1140         hw_params(priv).wd_timeout = cfg(priv)->base_params->wd_timeout;
1141
1142         /* Device-specific setup */
1143         cfg(priv)->lib->set_hw_params(priv);
1144 }
1145
1146
1147
1148 static void iwl_debug_config(struct iwl_priv *priv)
1149 {
1150         dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_DEBUG "
1151 #ifdef CONFIG_IWLWIFI_DEBUG
1152                 "enabled\n");
1153 #else
1154                 "disabled\n");
1155 #endif
1156         dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_DEBUGFS "
1157 #ifdef CONFIG_IWLWIFI_DEBUGFS
1158                 "enabled\n");
1159 #else
1160                 "disabled\n");
1161 #endif
1162         dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_DEVICE_TRACING "
1163 #ifdef CONFIG_IWLWIFI_DEVICE_TRACING
1164                 "enabled\n");
1165 #else
1166                 "disabled\n");
1167 #endif
1168
1169         dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_DEVICE_TESTMODE "
1170 #ifdef CONFIG_IWLWIFI_DEVICE_TESTMODE
1171                 "enabled\n");
1172 #else
1173                 "disabled\n");
1174 #endif
1175         dev_printk(KERN_INFO, trans(priv)->dev, "CONFIG_IWLWIFI_P2P "
1176 #ifdef CONFIG_IWLWIFI_P2P
1177                 "enabled\n");
1178 #else
1179                 "disabled\n");
1180 #endif
1181 }
1182
1183 static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
1184                                                  const struct iwl_fw *fw)
1185 {
1186         int err = 0;
1187         struct iwl_priv *priv;
1188         struct ieee80211_hw *hw;
1189         struct iwl_op_mode *op_mode;
1190         u16 num_mac;
1191         u32 ucode_flags;
1192
1193         /************************
1194          * 1. Allocating HW data
1195          ************************/
1196         hw = iwl_alloc_all();
1197         if (!hw) {
1198                 pr_err("%s: Cannot allocate network device\n",
1199                                 cfg(trans)->name);
1200                 err = -ENOMEM;
1201                 goto out;
1202         }
1203
1204         op_mode = hw->priv;
1205         op_mode->ops = &iwl_dvm_ops;
1206         priv = IWL_OP_MODE_GET_DVM(op_mode);
1207         priv->shrd = trans->shrd;
1208         priv->fw = fw;
1209         /* TODO: remove fw from shared data later */
1210         priv->shrd->fw = fw;
1211
1212         iwl_trans_configure(trans(priv), op_mode);
1213
1214         /* At this point both hw and priv are allocated. */
1215
1216         SET_IEEE80211_DEV(priv->hw, trans(priv)->dev);
1217
1218         /* show what debugging capabilities we have */
1219         iwl_debug_config(priv);
1220
1221         IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
1222
1223         /* is antenna coupling more than 35dB ? */
1224         priv->bt_ant_couple_ok =
1225                 (iwlagn_mod_params.ant_coupling >
1226                         IWL_BT_ANTENNA_COUPLING_THRESHOLD) ?
1227                         true : false;
1228
1229         /* enable/disable bt channel inhibition */
1230         priv->bt_ch_announce = iwlagn_mod_params.bt_ch_announce;
1231         IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n",
1232                        (priv->bt_ch_announce) ? "On" : "Off");
1233
1234         if (iwl_alloc_traffic_mem(priv))
1235                 IWL_ERR(priv, "Not enough memory to generate traffic log\n");
1236
1237         /* these spin locks will be used in apm_ops.init and EEPROM access
1238          * we should init now
1239          */
1240         spin_lock_init(&trans(priv)->reg_lock);
1241         spin_lock_init(&priv->statistics.lock);
1242
1243         /***********************
1244          * 3. Read REV register
1245          ***********************/
1246         IWL_INFO(priv, "Detected %s, REV=0x%X\n",
1247                 cfg(priv)->name, trans(priv)->hw_rev);
1248
1249         err = iwl_trans_start_hw(trans(priv));
1250         if (err)
1251                 goto out_free_traffic_mem;
1252
1253         /*****************
1254          * 4. Read EEPROM
1255          *****************/
1256         /* Read the EEPROM */
1257         err = iwl_eeprom_init(trans(priv), trans(priv)->hw_rev);
1258         /* Reset chip to save power until we load uCode during "up". */
1259         iwl_trans_stop_hw(trans(priv));
1260         if (err) {
1261                 IWL_ERR(priv, "Unable to init EEPROM\n");
1262                 goto out_free_traffic_mem;
1263         }
1264         err = iwl_eeprom_check_version(priv);
1265         if (err)
1266                 goto out_free_eeprom;
1267
1268         err = iwl_eeprom_init_hw_params(priv);
1269         if (err)
1270                 goto out_free_eeprom;
1271
1272         /* extract MAC Address */
1273         iwl_eeprom_get_mac(priv->shrd, priv->addresses[0].addr);
1274         IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr);
1275         priv->hw->wiphy->addresses = priv->addresses;
1276         priv->hw->wiphy->n_addresses = 1;
1277         num_mac = iwl_eeprom_query16(priv->shrd, EEPROM_NUM_MAC_ADDRESS);
1278         if (num_mac > 1) {
1279                 memcpy(priv->addresses[1].addr, priv->addresses[0].addr,
1280                        ETH_ALEN);
1281                 priv->addresses[1].addr[5]++;
1282                 priv->hw->wiphy->n_addresses++;
1283         }
1284
1285         /************************
1286          * 5. Setup HW constants
1287          ************************/
1288         iwl_set_hw_params(priv);
1289
1290         ucode_flags = fw->ucode_capa.flags;
1291
1292 #ifndef CONFIG_IWLWIFI_P2P
1293         ucode_flags &= ~IWL_UCODE_TLV_FLAGS_PAN;
1294 #endif
1295         if (!(hw_params(priv).sku & EEPROM_SKU_CAP_IPAN_ENABLE))
1296                 ucode_flags &= ~IWL_UCODE_TLV_FLAGS_PAN;
1297
1298         /*
1299          * if not PAN, then don't support P2P -- might be a uCode
1300          * packaging bug or due to the eeprom check above
1301          */
1302         if (!(ucode_flags & IWL_UCODE_TLV_FLAGS_PAN))
1303                 ucode_flags &= ~IWL_UCODE_TLV_FLAGS_P2P;
1304
1305
1306         /*******************
1307          * 6. Setup priv
1308          *******************/
1309
1310         err = iwl_init_drv(priv);
1311         if (err)
1312                 goto out_free_eeprom;
1313         /* At this point both hw and priv are initialized. */
1314
1315         /********************
1316          * 7. Setup services
1317          ********************/
1318         iwl_setup_deferred_work(priv);
1319         iwl_setup_rx_handlers(priv);
1320         iwl_testmode_init(priv);
1321
1322         iwl_power_initialize(priv);
1323         iwl_tt_initialize(priv);
1324
1325         snprintf(priv->hw->wiphy->fw_version,
1326                  sizeof(priv->hw->wiphy->fw_version),
1327                  "%s", fw->fw_version);
1328
1329         priv->new_scan_threshold_behaviour =
1330                 !!(ucode_flags & IWL_UCODE_TLV_FLAGS_NEWSCAN);
1331
1332         if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN) {
1333                 priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN;
1334                 priv->shrd->cmd_queue = IWL_IPAN_CMD_QUEUE_NUM;
1335         } else {
1336                 priv->sta_key_max_num = STA_KEY_MAX_NUM;
1337                 priv->shrd->cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
1338         }
1339
1340         priv->phy_calib_chain_noise_reset_cmd =
1341                 fw->ucode_capa.standard_phy_calibration_size;
1342         priv->phy_calib_chain_noise_gain_cmd =
1343                 fw->ucode_capa.standard_phy_calibration_size + 1;
1344
1345         /* initialize all valid contexts */
1346         iwl_init_context(priv, ucode_flags);
1347
1348         /**************************************************
1349          * This is still part of probe() in a sense...
1350          *
1351          * 9. Setup and register with mac80211 and debugfs
1352          **************************************************/
1353         err = iwlagn_mac_setup_register(priv, &fw->ucode_capa);
1354         if (err)
1355                 goto out_destroy_workqueue;
1356
1357         err = iwl_dbgfs_register(priv, DRV_NAME);
1358         if (err)
1359                 IWL_ERR(priv,
1360                         "failed to create debugfs files. Ignoring error: %d\n",
1361                         err);
1362
1363         return op_mode;
1364
1365 out_destroy_workqueue:
1366         destroy_workqueue(priv->workqueue);
1367         priv->workqueue = NULL;
1368         iwl_uninit_drv(priv);
1369 out_free_eeprom:
1370         iwl_eeprom_free(priv->shrd);
1371 out_free_traffic_mem:
1372         iwl_free_traffic_mem(priv);
1373         ieee80211_free_hw(priv->hw);
1374 out:
1375         op_mode = NULL;
1376         return op_mode;
1377 }
1378
1379 static void iwl_op_mode_dvm_stop(struct iwl_op_mode *op_mode)
1380 {
1381         struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
1382
1383         IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
1384
1385         iwl_dbgfs_unregister(priv);
1386
1387         iwl_testmode_cleanup(priv);
1388         iwlagn_mac_unregister(priv);
1389
1390         iwl_tt_exit(priv);
1391
1392         /*This will stop the queues, move the device to low power state */
1393         iwl_trans_stop_device(trans(priv));
1394
1395         iwl_eeprom_free(priv->shrd);
1396
1397         /*netif_stop_queue(dev); */
1398         flush_workqueue(priv->workqueue);
1399
1400         /* ieee80211_unregister_hw calls iwlagn_mac_stop, which flushes
1401          * priv->workqueue... so we can't take down the workqueue
1402          * until now... */
1403         destroy_workqueue(priv->workqueue);
1404         priv->workqueue = NULL;
1405         iwl_free_traffic_mem(priv);
1406
1407         iwl_uninit_drv(priv);
1408
1409         dev_kfree_skb(priv->beacon_skb);
1410
1411         ieee80211_free_hw(priv->hw);
1412 }
1413
1414 static void iwl_cmd_queue_full(struct iwl_op_mode *op_mode)
1415 {
1416         struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
1417
1418         if (!iwl_check_for_ct_kill(priv)) {
1419                 IWL_ERR(priv, "Restarting adapter queue is full\n");
1420                 iwl_nic_error(op_mode);
1421         }
1422 }
1423
1424 static void iwl_nic_config(struct iwl_op_mode *op_mode)
1425 {
1426         struct iwl_priv *priv = IWL_OP_MODE_GET_DVM(op_mode);
1427
1428         cfg(priv)->lib->nic_config(priv);
1429 }
1430
1431 const struct iwl_op_mode_ops iwl_dvm_ops = {
1432         .start = iwl_op_mode_dvm_start,
1433         .stop = iwl_op_mode_dvm_stop,
1434         .rx = iwl_rx_dispatch,
1435         .queue_full = iwl_stop_sw_queue,
1436         .queue_not_full = iwl_wake_sw_queue,
1437         .hw_rf_kill = iwl_set_hw_rfkill_state,
1438         .free_skb = iwl_free_skb,
1439         .nic_error = iwl_nic_error,
1440         .cmd_queue_full = iwl_cmd_queue_full,
1441         .nic_config = iwl_nic_config,
1442 };
1443
1444 /*****************************************************************************
1445  *
1446  * driver and module entry point
1447  *
1448  *****************************************************************************/
1449 static int __init iwl_init(void)
1450 {
1451
1452         int ret;
1453         pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
1454         pr_info(DRV_COPYRIGHT "\n");
1455
1456         ret = iwlagn_rate_control_register();
1457         if (ret) {
1458                 pr_err("Unable to register rate control algorithm: %d\n", ret);
1459                 return ret;
1460         }
1461
1462         ret = iwl_pci_register_driver();
1463
1464         if (ret)
1465                 goto error_register;
1466         return ret;
1467
1468 error_register:
1469         iwlagn_rate_control_unregister();
1470         return ret;
1471 }
1472
1473 static void __exit iwl_exit(void)
1474 {
1475         iwl_pci_unregister_driver();
1476         iwlagn_rate_control_unregister();
1477 }
1478
1479 module_exit(iwl_exit);
1480 module_init(iwl_init);
1481
1482 #ifdef CONFIG_IWLWIFI_DEBUG
1483 module_param_named(debug, iwlagn_mod_params.debug_level, uint,
1484                    S_IRUGO | S_IWUSR);
1485 MODULE_PARM_DESC(debug, "debug output mask");
1486 #endif
1487
1488 module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO);
1489 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
1490 module_param_named(11n_disable, iwlagn_mod_params.disable_11n, uint, S_IRUGO);
1491 MODULE_PARM_DESC(11n_disable,
1492         "disable 11n functionality, bitmap: 1: full, 2: agg TX, 4: agg RX");
1493 module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K,
1494                    int, S_IRUGO);
1495 MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
1496 module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO);
1497 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
1498
1499 module_param_named(ucode_alternative,
1500                    iwlagn_mod_params.wanted_ucode_alternative,
1501                    int, S_IRUGO);
1502 MODULE_PARM_DESC(ucode_alternative,
1503                  "specify ucode alternative to use from ucode file");
1504
1505 module_param_named(antenna_coupling, iwlagn_mod_params.ant_coupling,
1506                    int, S_IRUGO);
1507 MODULE_PARM_DESC(antenna_coupling,
1508                  "specify antenna coupling in dB (defualt: 0 dB)");
1509
1510 module_param_named(bt_ch_inhibition, iwlagn_mod_params.bt_ch_announce,
1511                    bool, S_IRUGO);
1512 MODULE_PARM_DESC(bt_ch_inhibition,
1513                  "Enable BT channel inhibition (default: enable)");
1514
1515 module_param_named(plcp_check, iwlagn_mod_params.plcp_check, bool, S_IRUGO);
1516 MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])");
1517
1518 module_param_named(ack_check, iwlagn_mod_params.ack_check, bool, S_IRUGO);
1519 MODULE_PARM_DESC(ack_check, "Check ack health (default: 0 [disabled])");
1520
1521 module_param_named(wd_disable, iwlagn_mod_params.wd_disable, int, S_IRUGO);
1522 MODULE_PARM_DESC(wd_disable,
1523                 "Disable stuck queue watchdog timer 0=system default, "
1524                 "1=disable, 2=enable (default: 0)");
1525
1526 /*
1527  * set bt_coex_active to true, uCode will do kill/defer
1528  * every time the priority line is asserted (BT is sending signals on the
1529  * priority line in the PCIx).
1530  * set bt_coex_active to false, uCode will ignore the BT activity and
1531  * perform the normal operation
1532  *
1533  * User might experience transmit issue on some platform due to WiFi/BT
1534  * co-exist problem. The possible behaviors are:
1535  *   Able to scan and finding all the available AP
1536  *   Not able to associate with any AP
1537  * On those platforms, WiFi communication can be restored by set
1538  * "bt_coex_active" module parameter to "false"
1539  *
1540  * default: bt_coex_active = true (BT_COEX_ENABLE)
1541  */
1542 module_param_named(bt_coex_active, iwlagn_mod_params.bt_coex_active,
1543                 bool, S_IRUGO);
1544 MODULE_PARM_DESC(bt_coex_active, "enable wifi/bt co-exist (default: enable)");
1545
1546 module_param_named(led_mode, iwlagn_mod_params.led_mode, int, S_IRUGO);
1547 MODULE_PARM_DESC(led_mode, "0=system default, "
1548                 "1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0)");
1549
1550 module_param_named(power_save, iwlagn_mod_params.power_save,
1551                 bool, S_IRUGO);
1552 MODULE_PARM_DESC(power_save,
1553                  "enable WiFi power management (default: disable)");
1554
1555 module_param_named(power_level, iwlagn_mod_params.power_level,
1556                 int, S_IRUGO);
1557 MODULE_PARM_DESC(power_level,
1558                  "default power save level (range from 1 - 5, default: 1)");
1559
1560 module_param_named(auto_agg, iwlagn_mod_params.auto_agg,
1561                 bool, S_IRUGO);
1562 MODULE_PARM_DESC(auto_agg,
1563                  "enable agg w/o check traffic load (default: enable)");
1564
1565 /*
1566  * For now, keep using power level 1 instead of automatically
1567  * adjusting ...
1568  */
1569 module_param_named(no_sleep_autoadjust, iwlagn_mod_params.no_sleep_autoadjust,
1570                 bool, S_IRUGO);
1571 MODULE_PARM_DESC(no_sleep_autoadjust,
1572                  "don't automatically adjust sleep level "
1573                  "according to maximum network latency (default: true)");