1 /******************************************************************************
3 * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/init.h>
33 #include <linux/pci.h>
34 #include <linux/dma-mapping.h>
35 #include <linux/delay.h>
36 #include <linux/sched.h>
37 #include <linux/skbuff.h>
38 #include <linux/netdevice.h>
39 #include <linux/wireless.h>
40 #include <linux/firmware.h>
41 #include <linux/etherdevice.h>
42 #include <linux/if_arp.h>
44 #include <net/mac80211.h>
46 #include <asm/div64.h>
48 #define DRV_NAME "iwlagn"
50 #include "iwl-eeprom.h"
54 #include "iwl-helpers.h"
56 #include "iwl-calib.h"
60 /******************************************************************************
64 ******************************************************************************/
67 * module name, copyright, version, etc.
69 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
71 #ifdef CONFIG_IWLWIFI_DEBUG
77 #define DRV_VERSION IWLWIFI_VERSION VD
80 MODULE_DESCRIPTION(DRV_DESCRIPTION);
81 MODULE_VERSION(DRV_VERSION);
82 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
83 MODULE_LICENSE("GPL");
84 MODULE_ALIAS("iwl4965");
87 * iwl_commit_rxon - commit staging_rxon to hardware
89 * The RXON command in staging_rxon is committed to the hardware and
90 * the active_rxon structure is updated with the new data. This
91 * function correctly transitions out of the RXON_ASSOC_MSK state if
92 * a HW tune is required based on the RXON structure changes.
94 int iwl_commit_rxon(struct iwl_priv *priv)
96 /* cast away the const for active_rxon in this function */
97 struct iwl_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
100 !!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK);
102 if (!iwl_is_alive(priv))
105 /* always get timestamp with Rx frame */
106 priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
108 ret = iwl_check_rxon_cmd(priv);
110 IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
115 * receive commit_rxon request
116 * abort any previous channel switch if still in process
118 if (priv->switch_rxon.switch_in_progress &&
119 (priv->switch_rxon.channel != priv->staging_rxon.channel)) {
120 IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
121 le16_to_cpu(priv->switch_rxon.channel));
122 priv->switch_rxon.switch_in_progress = false;
125 /* If we don't need to send a full RXON, we can use
126 * iwl_rxon_assoc_cmd which is used to reconfigure filter
127 * and other flags for the current radio configuration. */
128 if (!iwl_full_rxon_required(priv)) {
129 ret = iwl_send_rxon_assoc(priv);
131 IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
135 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
136 iwl_print_rx_config_cmd(priv);
140 /* If we are currently associated and the new config requires
141 * an RXON_ASSOC and the new config wants the associated mask enabled,
142 * we must clear the associated from the active configuration
143 * before we apply the new config */
144 if (iwl_is_associated(priv) && new_assoc) {
145 IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
146 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
148 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
149 sizeof(struct iwl_rxon_cmd),
152 /* If the mask clearing failed then we set
153 * active_rxon back to what it was previously */
155 active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
156 IWL_ERR(priv, "Error clearing ASSOC_MSK (%d)\n", ret);
159 iwl_clear_ucode_stations(priv, false);
160 iwl_restore_stations(priv);
161 ret = iwl_restore_default_wep_keys(priv);
163 IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
168 IWL_DEBUG_INFO(priv, "Sending RXON\n"
169 "* with%s RXON_FILTER_ASSOC_MSK\n"
172 (new_assoc ? "" : "out"),
173 le16_to_cpu(priv->staging_rxon.channel),
174 priv->staging_rxon.bssid_addr);
176 iwl_set_rxon_hwcrypto(priv, !priv->cfg->mod_params->sw_crypto);
178 /* Apply the new configuration
179 * RXON unassoc clears the station table in uCode so restoration of
180 * stations is needed after it (the RXON command) completes
183 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
184 sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
186 IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
189 IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON.\n");
190 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
191 iwl_clear_ucode_stations(priv, false);
192 iwl_restore_stations(priv);
193 ret = iwl_restore_default_wep_keys(priv);
195 IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
200 priv->start_calib = 0;
203 * allow CTS-to-self if possible for new association.
204 * this is relevant only for 5000 series and up,
205 * but will not damage 4965
207 priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
209 /* Apply the new configuration
210 * RXON assoc doesn't clear the station table in uCode,
212 ret = iwl_send_cmd_pdu(priv, REPLY_RXON,
213 sizeof(struct iwl_rxon_cmd), &priv->staging_rxon);
215 IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
218 memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
220 iwl_print_rx_config_cmd(priv);
222 iwl_init_sensitivity(priv);
224 /* If we issue a new RXON command which required a tune then we must
225 * send a new TXPOWER command or we won't be able to Tx any frames */
226 ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
228 IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
235 void iwl_update_chain_flags(struct iwl_priv *priv)
238 if (priv->cfg->ops->hcmd->set_rxon_chain)
239 priv->cfg->ops->hcmd->set_rxon_chain(priv);
240 iwlcore_commit_rxon(priv);
243 static void iwl_clear_free_frames(struct iwl_priv *priv)
245 struct list_head *element;
247 IWL_DEBUG_INFO(priv, "%d frames on pre-allocated heap on clear.\n",
250 while (!list_empty(&priv->free_frames)) {
251 element = priv->free_frames.next;
253 kfree(list_entry(element, struct iwl_frame, list));
254 priv->frames_count--;
257 if (priv->frames_count) {
258 IWL_WARN(priv, "%d frames still in use. Did we lose one?\n",
260 priv->frames_count = 0;
264 static struct iwl_frame *iwl_get_free_frame(struct iwl_priv *priv)
266 struct iwl_frame *frame;
267 struct list_head *element;
268 if (list_empty(&priv->free_frames)) {
269 frame = kzalloc(sizeof(*frame), GFP_KERNEL);
271 IWL_ERR(priv, "Could not allocate frame!\n");
275 priv->frames_count++;
279 element = priv->free_frames.next;
281 return list_entry(element, struct iwl_frame, list);
284 static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame)
286 memset(frame, 0, sizeof(*frame));
287 list_add(&frame->list, &priv->free_frames);
290 static u32 iwl_fill_beacon_frame(struct iwl_priv *priv,
291 struct ieee80211_hdr *hdr,
294 if (!iwl_is_associated(priv) || !priv->ibss_beacon ||
295 ((priv->iw_mode != NL80211_IFTYPE_ADHOC) &&
296 (priv->iw_mode != NL80211_IFTYPE_AP)))
299 if (priv->ibss_beacon->len > left)
302 memcpy(hdr, priv->ibss_beacon->data, priv->ibss_beacon->len);
304 return priv->ibss_beacon->len;
307 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
308 static void iwl_set_beacon_tim(struct iwl_priv *priv,
309 struct iwl_tx_beacon_cmd *tx_beacon_cmd,
310 u8 *beacon, u32 frame_size)
313 struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
316 * The index is relative to frame start but we start looking at the
317 * variable-length part of the beacon.
319 tim_idx = mgmt->u.beacon.variable - beacon;
321 /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
322 while ((tim_idx < (frame_size - 2)) &&
323 (beacon[tim_idx] != WLAN_EID_TIM))
324 tim_idx += beacon[tim_idx+1] + 2;
326 /* If TIM field was found, set variables */
327 if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
328 tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
329 tx_beacon_cmd->tim_size = beacon[tim_idx+1];
331 IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
334 static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
335 struct iwl_frame *frame)
337 struct iwl_tx_beacon_cmd *tx_beacon_cmd;
342 * We have to set up the TX command, the TX Beacon command, and the
346 /* Initialize memory */
347 tx_beacon_cmd = &frame->u.beacon;
348 memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
350 /* Set up TX beacon contents */
351 frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame,
352 sizeof(frame->u) - sizeof(*tx_beacon_cmd));
353 if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
356 /* Set up TX command fields */
357 tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
358 tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id;
359 tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
360 tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
361 TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
363 /* Set up TX beacon command fields */
364 iwl_set_beacon_tim(priv, tx_beacon_cmd, (u8 *)tx_beacon_cmd->frame,
367 /* Set up packet rate and flags */
368 rate = iwl_rate_get_lowest_plcp(priv);
369 priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant);
370 rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
371 if ((rate >= IWL_FIRST_CCK_RATE) && (rate <= IWL_LAST_CCK_RATE))
372 rate_flags |= RATE_MCS_CCK_MSK;
373 tx_beacon_cmd->tx.rate_n_flags = iwl_hw_set_rate_n_flags(rate,
376 return sizeof(*tx_beacon_cmd) + frame_size;
378 static int iwl_send_beacon_cmd(struct iwl_priv *priv)
380 struct iwl_frame *frame;
381 unsigned int frame_size;
384 frame = iwl_get_free_frame(priv);
386 IWL_ERR(priv, "Could not obtain free frame buffer for beacon "
391 frame_size = iwl_hw_get_beacon_cmd(priv, frame);
393 IWL_ERR(priv, "Error configuring the beacon command\n");
394 iwl_free_frame(priv, frame);
398 rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
401 iwl_free_frame(priv, frame);
406 static inline dma_addr_t iwl_tfd_tb_get_addr(struct iwl_tfd *tfd, u8 idx)
408 struct iwl_tfd_tb *tb = &tfd->tbs[idx];
410 dma_addr_t addr = get_unaligned_le32(&tb->lo);
411 if (sizeof(dma_addr_t) > sizeof(u32))
413 ((dma_addr_t)(le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << 16;
418 static inline u16 iwl_tfd_tb_get_len(struct iwl_tfd *tfd, u8 idx)
420 struct iwl_tfd_tb *tb = &tfd->tbs[idx];
422 return le16_to_cpu(tb->hi_n_len) >> 4;
425 static inline void iwl_tfd_set_tb(struct iwl_tfd *tfd, u8 idx,
426 dma_addr_t addr, u16 len)
428 struct iwl_tfd_tb *tb = &tfd->tbs[idx];
429 u16 hi_n_len = len << 4;
431 put_unaligned_le32(addr, &tb->lo);
432 if (sizeof(dma_addr_t) > sizeof(u32))
433 hi_n_len |= ((addr >> 16) >> 16) & 0xF;
435 tb->hi_n_len = cpu_to_le16(hi_n_len);
437 tfd->num_tbs = idx + 1;
440 static inline u8 iwl_tfd_get_num_tbs(struct iwl_tfd *tfd)
442 return tfd->num_tbs & 0x1f;
446 * iwl_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr]
447 * @priv - driver private data
450 * Does NOT advance any TFD circular buffer read/write indexes
451 * Does NOT free the TFD itself (which is within circular buffer)
453 void iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
455 struct iwl_tfd *tfd_tmp = (struct iwl_tfd *)txq->tfds;
457 struct pci_dev *dev = priv->pci_dev;
458 int index = txq->q.read_ptr;
462 tfd = &tfd_tmp[index];
464 /* Sanity check on number of chunks */
465 num_tbs = iwl_tfd_get_num_tbs(tfd);
467 if (num_tbs >= IWL_NUM_OF_TBS) {
468 IWL_ERR(priv, "Too many chunks: %i\n", num_tbs);
469 /* @todo issue fatal error, it is quite serious situation */
475 pci_unmap_single(dev,
476 pci_unmap_addr(&txq->meta[index], mapping),
477 pci_unmap_len(&txq->meta[index], len),
478 PCI_DMA_BIDIRECTIONAL);
480 /* Unmap chunks, if any. */
481 for (i = 1; i < num_tbs; i++) {
482 pci_unmap_single(dev, iwl_tfd_tb_get_addr(tfd, i),
483 iwl_tfd_tb_get_len(tfd, i), PCI_DMA_TODEVICE);
486 dev_kfree_skb(txq->txb[txq->q.read_ptr].skb[i - 1]);
487 txq->txb[txq->q.read_ptr].skb[i - 1] = NULL;
492 int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
493 struct iwl_tx_queue *txq,
494 dma_addr_t addr, u16 len,
498 struct iwl_tfd *tfd, *tfd_tmp;
502 tfd_tmp = (struct iwl_tfd *)txq->tfds;
503 tfd = &tfd_tmp[q->write_ptr];
506 memset(tfd, 0, sizeof(*tfd));
508 num_tbs = iwl_tfd_get_num_tbs(tfd);
510 /* Each TFD can point to a maximum 20 Tx buffers */
511 if (num_tbs >= IWL_NUM_OF_TBS) {
512 IWL_ERR(priv, "Error can not send more than %d chunks\n",
517 BUG_ON(addr & ~DMA_BIT_MASK(36));
518 if (unlikely(addr & ~IWL_TX_DMA_MASK))
519 IWL_ERR(priv, "Unaligned address = %llx\n",
520 (unsigned long long)addr);
522 iwl_tfd_set_tb(tfd, num_tbs, addr, len);
528 * Tell nic where to find circular buffer of Tx Frame Descriptors for
529 * given Tx queue, and enable the DMA channel used for that queue.
531 * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
532 * channels supported in hardware.
534 int iwl_hw_tx_queue_init(struct iwl_priv *priv,
535 struct iwl_tx_queue *txq)
537 int txq_id = txq->q.id;
539 /* Circular buffer (TFD queue in DRAM) physical base address */
540 iwl_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id),
541 txq->q.dma_addr >> 8);
546 /******************************************************************************
548 * Generic RX handler implementations
550 ******************************************************************************/
551 static void iwl_rx_reply_alive(struct iwl_priv *priv,
552 struct iwl_rx_mem_buffer *rxb)
554 struct iwl_rx_packet *pkt = rxb_addr(rxb);
555 struct iwl_alive_resp *palive;
556 struct delayed_work *pwork;
558 palive = &pkt->u.alive_frame;
560 IWL_DEBUG_INFO(priv, "Alive ucode status 0x%08X revision "
562 palive->is_valid, palive->ver_type,
563 palive->ver_subtype);
565 if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
566 IWL_DEBUG_INFO(priv, "Initialization Alive received.\n");
567 memcpy(&priv->card_alive_init,
569 sizeof(struct iwl_init_alive_resp));
570 pwork = &priv->init_alive_start;
572 IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
573 memcpy(&priv->card_alive, &pkt->u.alive_frame,
574 sizeof(struct iwl_alive_resp));
575 pwork = &priv->alive_start;
578 /* We delay the ALIVE response by 5ms to
579 * give the HW RF Kill time to activate... */
580 if (palive->is_valid == UCODE_VALID_OK)
581 queue_delayed_work(priv->workqueue, pwork,
582 msecs_to_jiffies(5));
584 IWL_WARN(priv, "uCode did not respond OK.\n");
587 static void iwl_bg_beacon_update(struct work_struct *work)
589 struct iwl_priv *priv =
590 container_of(work, struct iwl_priv, beacon_update);
591 struct sk_buff *beacon;
593 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
594 beacon = ieee80211_beacon_get(priv->hw, priv->vif);
597 IWL_ERR(priv, "update beacon failed\n");
601 mutex_lock(&priv->mutex);
602 /* new beacon skb is allocated every time; dispose previous.*/
603 if (priv->ibss_beacon)
604 dev_kfree_skb(priv->ibss_beacon);
606 priv->ibss_beacon = beacon;
607 mutex_unlock(&priv->mutex);
609 iwl_send_beacon_cmd(priv);
613 * iwl_bg_statistics_periodic - Timer callback to queue statistics
615 * This callback is provided in order to send a statistics request.
617 * This timer function is continually reset to execute within
618 * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
619 * was received. We need to ensure we receive the statistics in order
620 * to update the temperature used for calibrating the TXPOWER.
622 static void iwl_bg_statistics_periodic(unsigned long data)
624 struct iwl_priv *priv = (struct iwl_priv *)data;
626 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
629 /* dont send host command if rf-kill is on */
630 if (!iwl_is_ready_rf(priv))
633 iwl_send_statistics_request(priv, CMD_ASYNC, false);
637 static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
638 u32 start_idx, u32 num_events,
642 u32 ptr; /* SRAM byte address of log data */
643 u32 ev, time, data; /* event log data */
644 unsigned long reg_flags;
647 ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32));
649 ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32));
651 /* Make sure device is powered up for SRAM reads */
652 spin_lock_irqsave(&priv->reg_lock, reg_flags);
653 if (iwl_grab_nic_access(priv)) {
654 spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
658 /* Set starting address; reads will auto-increment */
659 _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
663 * "time" is actually "data" for mode 0 (no timestamp).
664 * place event id # at far right for easier visual parsing.
666 for (i = 0; i < num_events; i++) {
667 ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
668 time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
670 trace_iwlwifi_dev_ucode_cont_event(priv,
673 data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
674 trace_iwlwifi_dev_ucode_cont_event(priv,
678 /* Allow device to power down */
679 iwl_release_nic_access(priv);
680 spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
683 static void iwl_continuous_event_trace(struct iwl_priv *priv)
685 u32 capacity; /* event log capacity in # entries */
686 u32 base; /* SRAM byte address of event log header */
687 u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
688 u32 num_wraps; /* # times uCode wrapped to top of log */
689 u32 next_entry; /* index of next entry to be written by uCode */
691 if (priv->ucode_type == UCODE_INIT)
692 base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
694 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
695 if (priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
696 capacity = iwl_read_targ_mem(priv, base);
697 num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
698 mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
699 next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
703 if (num_wraps == priv->event_log.num_wraps) {
704 iwl_print_cont_event_trace(priv,
705 base, priv->event_log.next_entry,
706 next_entry - priv->event_log.next_entry,
708 priv->event_log.non_wraps_count++;
710 if ((num_wraps - priv->event_log.num_wraps) > 1)
711 priv->event_log.wraps_more_count++;
713 priv->event_log.wraps_once_count++;
714 trace_iwlwifi_dev_ucode_wrap_event(priv,
715 num_wraps - priv->event_log.num_wraps,
716 next_entry, priv->event_log.next_entry);
717 if (next_entry < priv->event_log.next_entry) {
718 iwl_print_cont_event_trace(priv, base,
719 priv->event_log.next_entry,
720 capacity - priv->event_log.next_entry,
723 iwl_print_cont_event_trace(priv, base, 0,
726 iwl_print_cont_event_trace(priv, base,
727 next_entry, capacity - next_entry,
730 iwl_print_cont_event_trace(priv, base, 0,
734 priv->event_log.num_wraps = num_wraps;
735 priv->event_log.next_entry = next_entry;
739 * iwl_bg_ucode_trace - Timer callback to log ucode event
741 * The timer is continually set to execute every
742 * UCODE_TRACE_PERIOD milliseconds after the last timer expired
743 * this function is to perform continuous uCode event logging operation
746 static void iwl_bg_ucode_trace(unsigned long data)
748 struct iwl_priv *priv = (struct iwl_priv *)data;
750 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
753 if (priv->event_log.ucode_trace) {
754 iwl_continuous_event_trace(priv);
755 /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
756 mod_timer(&priv->ucode_trace,
757 jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
761 static void iwl_rx_beacon_notif(struct iwl_priv *priv,
762 struct iwl_rx_mem_buffer *rxb)
764 #ifdef CONFIG_IWLWIFI_DEBUG
765 struct iwl_rx_packet *pkt = rxb_addr(rxb);
766 struct iwl4965_beacon_notif *beacon =
767 (struct iwl4965_beacon_notif *)pkt->u.raw;
768 u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
770 IWL_DEBUG_RX(priv, "beacon status %x retries %d iss %d "
771 "tsf %d %d rate %d\n",
772 le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
773 beacon->beacon_notify_hdr.failure_frame,
774 le32_to_cpu(beacon->ibss_mgr_status),
775 le32_to_cpu(beacon->high_tsf),
776 le32_to_cpu(beacon->low_tsf), rate);
779 if ((priv->iw_mode == NL80211_IFTYPE_AP) &&
780 (!test_bit(STATUS_EXIT_PENDING, &priv->status)))
781 queue_work(priv->workqueue, &priv->beacon_update);
784 /* Handle notification from uCode that card's power state is changing
785 * due to software, hardware, or critical temperature RFKILL */
786 static void iwl_rx_card_state_notif(struct iwl_priv *priv,
787 struct iwl_rx_mem_buffer *rxb)
789 struct iwl_rx_packet *pkt = rxb_addr(rxb);
790 u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
791 unsigned long status = priv->status;
793 IWL_DEBUG_RF_KILL(priv, "Card state received: HW:%s SW:%s CT:%s\n",
794 (flags & HW_CARD_DISABLED) ? "Kill" : "On",
795 (flags & SW_CARD_DISABLED) ? "Kill" : "On",
796 (flags & CT_CARD_DISABLED) ?
797 "Reached" : "Not reached");
799 if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED |
802 iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
803 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
805 iwl_write_direct32(priv, HBUS_TARG_MBX_C,
806 HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
808 if (!(flags & RXON_CARD_DISABLED)) {
809 iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
810 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
811 iwl_write_direct32(priv, HBUS_TARG_MBX_C,
812 HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
814 if (flags & CT_CARD_DISABLED)
815 iwl_tt_enter_ct_kill(priv);
817 if (!(flags & CT_CARD_DISABLED))
818 iwl_tt_exit_ct_kill(priv);
820 if (flags & HW_CARD_DISABLED)
821 set_bit(STATUS_RF_KILL_HW, &priv->status);
823 clear_bit(STATUS_RF_KILL_HW, &priv->status);
826 if (!(flags & RXON_CARD_DISABLED))
827 iwl_scan_cancel(priv);
829 if ((test_bit(STATUS_RF_KILL_HW, &status) !=
830 test_bit(STATUS_RF_KILL_HW, &priv->status)))
831 wiphy_rfkill_set_hw_state(priv->hw->wiphy,
832 test_bit(STATUS_RF_KILL_HW, &priv->status));
834 wake_up_interruptible(&priv->wait_command_queue);
837 int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
839 if (src == IWL_PWR_SRC_VAUX) {
840 if (pci_pme_capable(priv->pci_dev, PCI_D3cold))
841 iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
842 APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
843 ~APMG_PS_CTRL_MSK_PWR_SRC);
845 iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
846 APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
847 ~APMG_PS_CTRL_MSK_PWR_SRC);
854 * iwl_setup_rx_handlers - Initialize Rx handler callbacks
856 * Setup the RX handlers for each of the reply types sent from the uCode
859 * This function chains into the hardware specific files for them to setup
860 * any hardware specific handlers as well.
862 static void iwl_setup_rx_handlers(struct iwl_priv *priv)
864 priv->rx_handlers[REPLY_ALIVE] = iwl_rx_reply_alive;
865 priv->rx_handlers[REPLY_ERROR] = iwl_rx_reply_error;
866 priv->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = iwl_rx_csa;
867 priv->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
868 iwl_rx_spectrum_measure_notif;
869 priv->rx_handlers[PM_SLEEP_NOTIFICATION] = iwl_rx_pm_sleep_notif;
870 priv->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
871 iwl_rx_pm_debug_statistics_notif;
872 priv->rx_handlers[BEACON_NOTIFICATION] = iwl_rx_beacon_notif;
875 * The same handler is used for both the REPLY to a discrete
876 * statistics request from the host as well as for the periodic
877 * statistics notifications (after received beacons) from the uCode.
879 priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_reply_statistics;
880 priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_rx_statistics;
882 iwl_setup_rx_scan_handlers(priv);
884 /* status change handler */
885 priv->rx_handlers[CARD_STATE_NOTIFICATION] = iwl_rx_card_state_notif;
887 priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
888 iwl_rx_missed_beacon_notif;
890 priv->rx_handlers[REPLY_RX_PHY_CMD] = iwlagn_rx_reply_rx_phy;
891 priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwlagn_rx_reply_rx;
893 priv->rx_handlers[REPLY_COMPRESSED_BA] = iwlagn_rx_reply_compressed_ba;
894 /* Set up hardware specific Rx handlers */
895 priv->cfg->ops->lib->rx_handler_setup(priv);
899 * iwl_rx_handle - Main entry function for receiving responses from uCode
901 * Uses the priv->rx_handlers callback function array to invoke
902 * the appropriate handlers, including command responses,
903 * frame-received notifications, and other notifications.
905 void iwl_rx_handle(struct iwl_priv *priv)
907 struct iwl_rx_mem_buffer *rxb;
908 struct iwl_rx_packet *pkt;
909 struct iwl_rx_queue *rxq = &priv->rxq;
917 /* uCode's read index (stored in shared DRAM) indicates the last Rx
918 * buffer that the driver may process (last buffer filled by ucode). */
919 r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
922 /* Rx interrupt, but nothing sent from uCode */
924 IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
926 /* calculate total frames need to be restock after handling RX */
927 total_empty = r - rxq->write_actual;
929 total_empty += RX_QUEUE_SIZE;
931 if (total_empty > (RX_QUEUE_SIZE / 2))
937 /* If an RXB doesn't have a Rx queue slot associated with it,
938 * then a bug has been introduced in the queue refilling
939 * routines -- catch it here */
942 rxq->queue[i] = NULL;
944 pci_unmap_page(priv->pci_dev, rxb->page_dma,
945 PAGE_SIZE << priv->hw_params.rx_page_order,
949 trace_iwlwifi_dev_rx(priv, pkt,
950 le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
952 /* Reclaim a command buffer only if this packet is a response
953 * to a (driver-originated) command.
954 * If the packet (e.g. Rx frame) originated from uCode,
955 * there is no command buffer to reclaim.
956 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
957 * but apparently a few don't get set; catch them here. */
958 reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
959 (pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
960 (pkt->hdr.cmd != REPLY_RX) &&
961 (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) &&
962 (pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
963 (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
964 (pkt->hdr.cmd != REPLY_TX);
966 /* Based on type of command response or notification,
967 * handle those that need handling via function in
968 * rx_handlers table. See iwl_setup_rx_handlers() */
969 if (priv->rx_handlers[pkt->hdr.cmd]) {
970 IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r,
971 i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
972 priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
973 priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
975 /* No handling needed */
977 "r %d i %d No handler needed for %s, 0x%02x\n",
978 r, i, get_cmd_string(pkt->hdr.cmd),
983 * XXX: After here, we should always check rxb->page
984 * against NULL before touching it or its virtual
985 * memory (pkt). Because some rx_handler might have
986 * already taken or freed the pages.
990 /* Invoke any callbacks, transfer the buffer to caller,
991 * and fire off the (possibly) blocking iwl_send_cmd()
992 * as we reclaim the driver command queue */
994 iwl_tx_cmd_complete(priv, rxb);
996 IWL_WARN(priv, "Claim null rxb?\n");
999 /* Reuse the page if possible. For notification packets and
1000 * SKBs that fail to Rx correctly, add them back into the
1001 * rx_free list for reuse later. */
1002 spin_lock_irqsave(&rxq->lock, flags);
1003 if (rxb->page != NULL) {
1004 rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page,
1005 0, PAGE_SIZE << priv->hw_params.rx_page_order,
1006 PCI_DMA_FROMDEVICE);
1007 list_add_tail(&rxb->list, &rxq->rx_free);
1010 list_add_tail(&rxb->list, &rxq->rx_used);
1012 spin_unlock_irqrestore(&rxq->lock, flags);
1014 i = (i + 1) & RX_QUEUE_MASK;
1015 /* If there are a lot of unused frames,
1016 * restock the Rx queue so ucode wont assert. */
1021 iwlagn_rx_replenish_now(priv);
1027 /* Backtrack one entry */
1030 iwlagn_rx_replenish_now(priv);
1032 iwlagn_rx_queue_restock(priv);
1035 /* call this function to flush any scheduled tasklet */
1036 static inline void iwl_synchronize_irq(struct iwl_priv *priv)
1038 /* wait to make sure we flush pending tasklet*/
1039 synchronize_irq(priv->pci_dev->irq);
1040 tasklet_kill(&priv->irq_tasklet);
1043 static void iwl_irq_tasklet_legacy(struct iwl_priv *priv)
1045 u32 inta, handled = 0;
1047 unsigned long flags;
1049 #ifdef CONFIG_IWLWIFI_DEBUG
1053 spin_lock_irqsave(&priv->lock, flags);
1055 /* Ack/clear/reset pending uCode interrupts.
1056 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1057 * and will clear only when CSR_FH_INT_STATUS gets cleared. */
1058 inta = iwl_read32(priv, CSR_INT);
1059 iwl_write32(priv, CSR_INT, inta);
1061 /* Ack/clear/reset pending flow-handler (DMA) interrupts.
1062 * Any new interrupts that happen after this, either while we're
1063 * in this tasklet, or later, will show up in next ISR/tasklet. */
1064 inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
1065 iwl_write32(priv, CSR_FH_INT_STATUS, inta_fh);
1067 #ifdef CONFIG_IWLWIFI_DEBUG
1068 if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
1069 /* just for debug */
1070 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1071 IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
1072 inta, inta_mask, inta_fh);
1076 spin_unlock_irqrestore(&priv->lock, flags);
1078 /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
1079 * atomic, make sure that inta covers all the interrupts that
1080 * we've discovered, even if FH interrupt came in just after
1081 * reading CSR_INT. */
1082 if (inta_fh & CSR49_FH_INT_RX_MASK)
1083 inta |= CSR_INT_BIT_FH_RX;
1084 if (inta_fh & CSR49_FH_INT_TX_MASK)
1085 inta |= CSR_INT_BIT_FH_TX;
1087 /* Now service all interrupt bits discovered above. */
1088 if (inta & CSR_INT_BIT_HW_ERR) {
1089 IWL_ERR(priv, "Hardware error detected. Restarting.\n");
1091 /* Tell the device to stop sending interrupts */
1092 iwl_disable_interrupts(priv);
1094 priv->isr_stats.hw++;
1095 iwl_irq_handle_error(priv);
1097 handled |= CSR_INT_BIT_HW_ERR;
1102 #ifdef CONFIG_IWLWIFI_DEBUG
1103 if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1104 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1105 if (inta & CSR_INT_BIT_SCD) {
1106 IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
1107 "the frame/frames.\n");
1108 priv->isr_stats.sch++;
1111 /* Alive notification via Rx interrupt will do the real work */
1112 if (inta & CSR_INT_BIT_ALIVE) {
1113 IWL_DEBUG_ISR(priv, "Alive interrupt\n");
1114 priv->isr_stats.alive++;
1118 /* Safely ignore these bits for debug checks below */
1119 inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1121 /* HW RF KILL switch toggled */
1122 if (inta & CSR_INT_BIT_RF_KILL) {
1124 if (!(iwl_read32(priv, CSR_GP_CNTRL) &
1125 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
1128 IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
1129 hw_rf_kill ? "disable radio" : "enable radio");
1131 priv->isr_stats.rfkill++;
1133 /* driver only loads ucode once setting the interface up.
1134 * the driver allows loading the ucode even if the radio
1135 * is killed. Hence update the killswitch state here. The
1136 * rfkill handler will care about restarting if needed.
1138 if (!test_bit(STATUS_ALIVE, &priv->status)) {
1140 set_bit(STATUS_RF_KILL_HW, &priv->status);
1142 clear_bit(STATUS_RF_KILL_HW, &priv->status);
1143 wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
1146 handled |= CSR_INT_BIT_RF_KILL;
1149 /* Chip got too hot and stopped itself */
1150 if (inta & CSR_INT_BIT_CT_KILL) {
1151 IWL_ERR(priv, "Microcode CT kill error detected.\n");
1152 priv->isr_stats.ctkill++;
1153 handled |= CSR_INT_BIT_CT_KILL;
1156 /* Error detected by uCode */
1157 if (inta & CSR_INT_BIT_SW_ERR) {
1158 IWL_ERR(priv, "Microcode SW error detected. "
1159 " Restarting 0x%X.\n", inta);
1160 priv->isr_stats.sw++;
1161 priv->isr_stats.sw_err = inta;
1162 iwl_irq_handle_error(priv);
1163 handled |= CSR_INT_BIT_SW_ERR;
1167 * uCode wakes up after power-down sleep.
1168 * Tell device about any new tx or host commands enqueued,
1169 * and about any Rx buffers made available while asleep.
1171 if (inta & CSR_INT_BIT_WAKEUP) {
1172 IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
1173 iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
1174 for (i = 0; i < priv->hw_params.max_txq_num; i++)
1175 iwl_txq_update_write_ptr(priv, &priv->txq[i]);
1176 priv->isr_stats.wakeup++;
1177 handled |= CSR_INT_BIT_WAKEUP;
1180 /* All uCode command responses, including Tx command responses,
1181 * Rx "responses" (frame-received notification), and other
1182 * notifications from uCode come through here*/
1183 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1184 iwl_rx_handle(priv);
1185 priv->isr_stats.rx++;
1186 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1189 /* This "Tx" DMA channel is used only for loading uCode */
1190 if (inta & CSR_INT_BIT_FH_TX) {
1191 IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
1192 priv->isr_stats.tx++;
1193 handled |= CSR_INT_BIT_FH_TX;
1194 /* Wake up uCode load routine, now that load is complete */
1195 priv->ucode_write_complete = 1;
1196 wake_up_interruptible(&priv->wait_command_queue);
1199 if (inta & ~handled) {
1200 IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
1201 priv->isr_stats.unhandled++;
1204 if (inta & ~(priv->inta_mask)) {
1205 IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
1206 inta & ~priv->inta_mask);
1207 IWL_WARN(priv, " with FH_INT = 0x%08x\n", inta_fh);
1210 /* Re-enable all interrupts */
1211 /* only Re-enable if diabled by irq */
1212 if (test_bit(STATUS_INT_ENABLED, &priv->status))
1213 iwl_enable_interrupts(priv);
1215 #ifdef CONFIG_IWLWIFI_DEBUG
1216 if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1217 inta = iwl_read32(priv, CSR_INT);
1218 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1219 inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
1220 IWL_DEBUG_ISR(priv, "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
1221 "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
1226 /* tasklet for iwlagn interrupt */
1227 static void iwl_irq_tasklet(struct iwl_priv *priv)
1231 unsigned long flags;
1233 #ifdef CONFIG_IWLWIFI_DEBUG
1237 spin_lock_irqsave(&priv->lock, flags);
1239 /* Ack/clear/reset pending uCode interrupts.
1240 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
1242 /* There is a hardware bug in the interrupt mask function that some
1243 * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
1244 * they are disabled in the CSR_INT_MASK register. Furthermore the
1245 * ICT interrupt handling mechanism has another bug that might cause
1246 * these unmasked interrupts fail to be detected. We workaround the
1247 * hardware bugs here by ACKing all the possible interrupts so that
1248 * interrupt coalescing can still be achieved.
1250 iwl_write32(priv, CSR_INT, priv->_agn.inta | ~priv->inta_mask);
1252 inta = priv->_agn.inta;
1254 #ifdef CONFIG_IWLWIFI_DEBUG
1255 if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
1256 /* just for debug */
1257 inta_mask = iwl_read32(priv, CSR_INT_MASK);
1258 IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ",
1263 spin_unlock_irqrestore(&priv->lock, flags);
1265 /* saved interrupt in inta variable now we can reset priv->_agn.inta */
1266 priv->_agn.inta = 0;
1268 /* Now service all interrupt bits discovered above. */
1269 if (inta & CSR_INT_BIT_HW_ERR) {
1270 IWL_ERR(priv, "Hardware error detected. Restarting.\n");
1272 /* Tell the device to stop sending interrupts */
1273 iwl_disable_interrupts(priv);
1275 priv->isr_stats.hw++;
1276 iwl_irq_handle_error(priv);
1278 handled |= CSR_INT_BIT_HW_ERR;
1283 #ifdef CONFIG_IWLWIFI_DEBUG
1284 if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
1285 /* NIC fires this, but we don't use it, redundant with WAKEUP */
1286 if (inta & CSR_INT_BIT_SCD) {
1287 IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
1288 "the frame/frames.\n");
1289 priv->isr_stats.sch++;
1292 /* Alive notification via Rx interrupt will do the real work */
1293 if (inta & CSR_INT_BIT_ALIVE) {
1294 IWL_DEBUG_ISR(priv, "Alive interrupt\n");
1295 priv->isr_stats.alive++;
1299 /* Safely ignore these bits for debug checks below */
1300 inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
1302 /* HW RF KILL switch toggled */
1303 if (inta & CSR_INT_BIT_RF_KILL) {
1305 if (!(iwl_read32(priv, CSR_GP_CNTRL) &
1306 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
1309 IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
1310 hw_rf_kill ? "disable radio" : "enable radio");
1312 priv->isr_stats.rfkill++;
1314 /* driver only loads ucode once setting the interface up.
1315 * the driver allows loading the ucode even if the radio
1316 * is killed. Hence update the killswitch state here. The
1317 * rfkill handler will care about restarting if needed.
1319 if (!test_bit(STATUS_ALIVE, &priv->status)) {
1321 set_bit(STATUS_RF_KILL_HW, &priv->status);
1323 clear_bit(STATUS_RF_KILL_HW, &priv->status);
1324 wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
1327 handled |= CSR_INT_BIT_RF_KILL;
1330 /* Chip got too hot and stopped itself */
1331 if (inta & CSR_INT_BIT_CT_KILL) {
1332 IWL_ERR(priv, "Microcode CT kill error detected.\n");
1333 priv->isr_stats.ctkill++;
1334 handled |= CSR_INT_BIT_CT_KILL;
1337 /* Error detected by uCode */
1338 if (inta & CSR_INT_BIT_SW_ERR) {
1339 IWL_ERR(priv, "Microcode SW error detected. "
1340 " Restarting 0x%X.\n", inta);
1341 priv->isr_stats.sw++;
1342 priv->isr_stats.sw_err = inta;
1343 iwl_irq_handle_error(priv);
1344 handled |= CSR_INT_BIT_SW_ERR;
1347 /* uCode wakes up after power-down sleep */
1348 if (inta & CSR_INT_BIT_WAKEUP) {
1349 IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
1350 iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
1351 for (i = 0; i < priv->hw_params.max_txq_num; i++)
1352 iwl_txq_update_write_ptr(priv, &priv->txq[i]);
1354 priv->isr_stats.wakeup++;
1356 handled |= CSR_INT_BIT_WAKEUP;
1359 /* All uCode command responses, including Tx command responses,
1360 * Rx "responses" (frame-received notification), and other
1361 * notifications from uCode come through here*/
1362 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
1363 CSR_INT_BIT_RX_PERIODIC)) {
1364 IWL_DEBUG_ISR(priv, "Rx interrupt\n");
1365 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
1366 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
1367 iwl_write32(priv, CSR_FH_INT_STATUS,
1368 CSR49_FH_INT_RX_MASK);
1370 if (inta & CSR_INT_BIT_RX_PERIODIC) {
1371 handled |= CSR_INT_BIT_RX_PERIODIC;
1372 iwl_write32(priv, CSR_INT, CSR_INT_BIT_RX_PERIODIC);
1374 /* Sending RX interrupt require many steps to be done in the
1376 * 1- write interrupt to current index in ICT table.
1378 * 3- update RX shared data to indicate last write index.
1379 * 4- send interrupt.
1380 * This could lead to RX race, driver could receive RX interrupt
1381 * but the shared data changes does not reflect this;
1382 * periodic interrupt will detect any dangling Rx activity.
1385 /* Disable periodic interrupt; we use it as just a one-shot. */
1386 iwl_write8(priv, CSR_INT_PERIODIC_REG,
1387 CSR_INT_PERIODIC_DIS);
1388 iwl_rx_handle(priv);
1391 * Enable periodic interrupt in 8 msec only if we received
1392 * real RX interrupt (instead of just periodic int), to catch
1393 * any dangling Rx interrupt. If it was just the periodic
1394 * interrupt, there was no dangling Rx activity, and no need
1395 * to extend the periodic interrupt; one-shot is enough.
1397 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
1398 iwl_write8(priv, CSR_INT_PERIODIC_REG,
1399 CSR_INT_PERIODIC_ENA);
1401 priv->isr_stats.rx++;
1404 /* This "Tx" DMA channel is used only for loading uCode */
1405 if (inta & CSR_INT_BIT_FH_TX) {
1406 iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK);
1407 IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
1408 priv->isr_stats.tx++;
1409 handled |= CSR_INT_BIT_FH_TX;
1410 /* Wake up uCode load routine, now that load is complete */
1411 priv->ucode_write_complete = 1;
1412 wake_up_interruptible(&priv->wait_command_queue);
1415 if (inta & ~handled) {
1416 IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
1417 priv->isr_stats.unhandled++;
1420 if (inta & ~(priv->inta_mask)) {
1421 IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
1422 inta & ~priv->inta_mask);
1425 /* Re-enable all interrupts */
1426 /* only Re-enable if diabled by irq */
1427 if (test_bit(STATUS_INT_ENABLED, &priv->status))
1428 iwl_enable_interrupts(priv);
1431 /* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */
1432 #define ACK_CNT_RATIO (50)
1433 #define BA_TIMEOUT_CNT (5)
1434 #define BA_TIMEOUT_MAX (16)
1437 * iwl_good_ack_health - checks for ACK count ratios, BA timeout retries.
1439 * When the ACK count ratio is 0 and aggregated BA timeout retries exceeding
1440 * the BA_TIMEOUT_MAX, reload firmware and bring system back to normal
1443 bool iwl_good_ack_health(struct iwl_priv *priv,
1444 struct iwl_rx_packet *pkt)
1447 int actual_ack_cnt_delta, expected_ack_cnt_delta;
1448 int ba_timeout_delta;
1450 actual_ack_cnt_delta =
1451 le32_to_cpu(pkt->u.stats.tx.actual_ack_cnt) -
1452 le32_to_cpu(priv->statistics.tx.actual_ack_cnt);
1453 expected_ack_cnt_delta =
1454 le32_to_cpu(pkt->u.stats.tx.expected_ack_cnt) -
1455 le32_to_cpu(priv->statistics.tx.expected_ack_cnt);
1457 le32_to_cpu(pkt->u.stats.tx.agg.ba_timeout) -
1458 le32_to_cpu(priv->statistics.tx.agg.ba_timeout);
1459 if ((priv->_agn.agg_tids_count > 0) &&
1460 (expected_ack_cnt_delta > 0) &&
1461 (((actual_ack_cnt_delta * 100) / expected_ack_cnt_delta)
1463 (ba_timeout_delta > BA_TIMEOUT_CNT)) {
1464 IWL_DEBUG_RADIO(priv, "actual_ack_cnt delta = %d,"
1465 " expected_ack_cnt = %d\n",
1466 actual_ack_cnt_delta, expected_ack_cnt_delta);
1468 #ifdef CONFIG_IWLWIFI_DEBUG
1469 IWL_DEBUG_RADIO(priv, "rx_detected_cnt delta = %d\n",
1470 priv->delta_statistics.tx.rx_detected_cnt);
1471 IWL_DEBUG_RADIO(priv,
1472 "ack_or_ba_timeout_collision delta = %d\n",
1473 priv->delta_statistics.tx.
1474 ack_or_ba_timeout_collision);
1476 IWL_DEBUG_RADIO(priv, "agg ba_timeout delta = %d\n",
1478 if (!actual_ack_cnt_delta &&
1479 (ba_timeout_delta >= BA_TIMEOUT_MAX))
1486 /******************************************************************************
1488 * uCode download functions
1490 ******************************************************************************/
1492 static void iwl_dealloc_ucode_pci(struct iwl_priv *priv)
1494 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_code);
1495 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data);
1496 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
1497 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init);
1498 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_init_data);
1499 iwl_free_fw_desc(priv->pci_dev, &priv->ucode_boot);
1502 static void iwl_nic_start(struct iwl_priv *priv)
1504 /* Remove all resets to allow NIC to operate */
1505 iwl_write32(priv, CSR_RESET, 0);
1509 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
1510 static int iwl_mac_setup_register(struct iwl_priv *priv);
1512 static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
1514 const char *name_pre = priv->cfg->fw_name_pre;
1517 priv->fw_index = priv->cfg->ucode_api_max;
1521 if (priv->fw_index < priv->cfg->ucode_api_min) {
1522 IWL_ERR(priv, "no suitable firmware found!\n");
1526 sprintf(priv->firmware_name, "%s%d%s",
1527 name_pre, priv->fw_index, ".ucode");
1529 IWL_DEBUG_INFO(priv, "attempting to load firmware '%s'\n",
1530 priv->firmware_name);
1532 return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
1533 &priv->pci_dev->dev, GFP_KERNEL, priv,
1534 iwl_ucode_callback);
1538 * iwl_ucode_callback - callback when firmware was loaded
1540 * If loaded successfully, copies the firmware into buffers
1541 * for the card to fetch (via DMA).
1543 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
1545 struct iwl_priv *priv = context;
1546 struct iwl_ucode_header *ucode;
1547 const unsigned int api_max = priv->cfg->ucode_api_max;
1548 const unsigned int api_min = priv->cfg->ucode_api_min;
1552 u32 inst_size, data_size, init_size, init_data_size, boot_size;
1558 IWL_ERR(priv, "request for firmware file '%s' failed.\n",
1559 priv->firmware_name);
1563 IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
1564 priv->firmware_name, ucode_raw->size);
1566 /* Make sure that we got at least the v1 header! */
1567 if (ucode_raw->size < priv->cfg->ops->ucode->get_header_size(1)) {
1568 IWL_ERR(priv, "File size way too small!\n");
1572 /* Data from ucode file: header followed by uCode images */
1573 ucode = (struct iwl_ucode_header *)ucode_raw->data;
1575 priv->ucode_ver = le32_to_cpu(ucode->ver);
1576 api_ver = IWL_UCODE_API(priv->ucode_ver);
1577 build = priv->cfg->ops->ucode->get_build(ucode, api_ver);
1578 inst_size = priv->cfg->ops->ucode->get_inst_size(ucode, api_ver);
1579 data_size = priv->cfg->ops->ucode->get_data_size(ucode, api_ver);
1580 init_size = priv->cfg->ops->ucode->get_init_size(ucode, api_ver);
1582 priv->cfg->ops->ucode->get_init_data_size(ucode, api_ver);
1583 boot_size = priv->cfg->ops->ucode->get_boot_size(ucode, api_ver);
1584 src = priv->cfg->ops->ucode->get_data(ucode, api_ver);
1586 /* api_ver should match the api version forming part of the
1587 * firmware filename ... but we don't check for that and only rely
1588 * on the API version read from firmware header from here on forward */
1590 if (api_ver < api_min || api_ver > api_max) {
1591 IWL_ERR(priv, "Driver unable to support your firmware API. "
1592 "Driver supports v%u, firmware is v%u.\n",
1597 if (api_ver != api_max)
1598 IWL_ERR(priv, "Firmware has old API version. Expected v%u, "
1599 "got v%u. New firmware can be obtained "
1600 "from http://www.intellinuxwireless.org.\n",
1604 sprintf(buildstr, " build %u", build);
1608 IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u%s\n",
1609 IWL_UCODE_MAJOR(priv->ucode_ver),
1610 IWL_UCODE_MINOR(priv->ucode_ver),
1611 IWL_UCODE_API(priv->ucode_ver),
1612 IWL_UCODE_SERIAL(priv->ucode_ver),
1615 snprintf(priv->hw->wiphy->fw_version,
1616 sizeof(priv->hw->wiphy->fw_version),
1618 IWL_UCODE_MAJOR(priv->ucode_ver),
1619 IWL_UCODE_MINOR(priv->ucode_ver),
1620 IWL_UCODE_API(priv->ucode_ver),
1621 IWL_UCODE_SERIAL(priv->ucode_ver),
1624 eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
1625 IWL_DEBUG_INFO(priv, "NVM Type: %s, version: 0x%x\n",
1626 (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
1627 ? "OTP" : "EEPROM", eeprom_ver);
1629 IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
1631 IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n",
1633 IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %u\n",
1635 IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %u\n",
1637 IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %u\n",
1639 IWL_DEBUG_INFO(priv, "f/w package hdr boot inst size = %u\n",
1643 * For any of the failures below (before allocating pci memory)
1644 * we will try to load a version with a smaller API -- maybe the
1645 * user just got a corrupted version of the latest API.
1648 /* Verify size of file vs. image size info in file's header */
1649 if (ucode_raw->size !=
1650 priv->cfg->ops->ucode->get_header_size(api_ver) +
1651 inst_size + data_size + init_size +
1652 init_data_size + boot_size) {
1654 IWL_DEBUG_INFO(priv,
1655 "uCode file size %d does not match expected size\n",
1656 (int)ucode_raw->size);
1660 /* Verify that uCode images will fit in card's SRAM */
1661 if (inst_size > priv->hw_params.max_inst_size) {
1662 IWL_DEBUG_INFO(priv, "uCode instr len %d too large to fit in\n",
1667 if (data_size > priv->hw_params.max_data_size) {
1668 IWL_DEBUG_INFO(priv, "uCode data len %d too large to fit in\n",
1672 if (init_size > priv->hw_params.max_inst_size) {
1673 IWL_INFO(priv, "uCode init instr len %d too large to fit in\n",
1677 if (init_data_size > priv->hw_params.max_data_size) {
1678 IWL_INFO(priv, "uCode init data len %d too large to fit in\n",
1682 if (boot_size > priv->hw_params.max_bsm_size) {
1683 IWL_INFO(priv, "uCode boot instr len %d too large to fit in\n",
1688 /* Allocate ucode buffers for card's bus-master loading ... */
1690 /* Runtime instructions and 2 copies of data:
1691 * 1) unmodified from disk
1692 * 2) backup cache for save/restore during power-downs */
1693 priv->ucode_code.len = inst_size;
1694 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_code);
1696 priv->ucode_data.len = data_size;
1697 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data);
1699 priv->ucode_data_backup.len = data_size;
1700 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
1702 if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
1703 !priv->ucode_data_backup.v_addr)
1706 /* Initialization instructions and data */
1707 if (init_size && init_data_size) {
1708 priv->ucode_init.len = init_size;
1709 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init);
1711 priv->ucode_init_data.len = init_data_size;
1712 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_init_data);
1714 if (!priv->ucode_init.v_addr || !priv->ucode_init_data.v_addr)
1718 /* Bootstrap (instructions only, no data) */
1720 priv->ucode_boot.len = boot_size;
1721 iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_boot);
1723 if (!priv->ucode_boot.v_addr)
1727 /* Copy images into buffers for card's bus-master reads ... */
1729 /* Runtime instructions (first block of data in file) */
1731 IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode instr len %Zd\n", len);
1732 memcpy(priv->ucode_code.v_addr, src, len);
1735 IWL_DEBUG_INFO(priv, "uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
1736 priv->ucode_code.v_addr, (u32)priv->ucode_code.p_addr);
1738 /* Runtime data (2nd block)
1739 * NOTE: Copy into backup buffer will be done in iwl_up() */
1741 IWL_DEBUG_INFO(priv, "Copying (but not loading) uCode data len %Zd\n", len);
1742 memcpy(priv->ucode_data.v_addr, src, len);
1743 memcpy(priv->ucode_data_backup.v_addr, src, len);
1746 /* Initialization instructions (3rd block) */
1749 IWL_DEBUG_INFO(priv, "Copying (but not loading) init instr len %Zd\n",
1751 memcpy(priv->ucode_init.v_addr, src, len);
1755 /* Initialization data (4th block) */
1756 if (init_data_size) {
1757 len = init_data_size;
1758 IWL_DEBUG_INFO(priv, "Copying (but not loading) init data len %Zd\n",
1760 memcpy(priv->ucode_init_data.v_addr, src, len);
1764 /* Bootstrap instructions (5th block) */
1766 IWL_DEBUG_INFO(priv, "Copying (but not loading) boot instr len %Zd\n", len);
1767 memcpy(priv->ucode_boot.v_addr, src, len);
1769 /**************************************************
1770 * This is still part of probe() in a sense...
1772 * 9. Setup and register with mac80211 and debugfs
1773 **************************************************/
1774 err = iwl_mac_setup_register(priv);
1778 err = iwl_dbgfs_register(priv, DRV_NAME);
1780 IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
1782 /* We have our copies now, allow OS release its copies */
1783 release_firmware(ucode_raw);
1784 complete(&priv->_agn.firmware_loading_complete);
1788 /* try next, if any */
1789 if (iwl_request_firmware(priv, false))
1791 release_firmware(ucode_raw);
1795 IWL_ERR(priv, "failed to allocate pci memory\n");
1796 iwl_dealloc_ucode_pci(priv);
1798 complete(&priv->_agn.firmware_loading_complete);
1799 device_release_driver(&priv->pci_dev->dev);
1800 release_firmware(ucode_raw);
1803 static const char *desc_lookup_text[] = {
1808 "NMI_INTERRUPT_WDG",
1812 "HW_ERROR_TUNE_LOCK",
1813 "HW_ERROR_TEMPERATURE",
1814 "ILLEGAL_CHAN_FREQ",
1817 "NMI_INTERRUPT_HOST",
1818 "NMI_INTERRUPT_ACTION_PT",
1819 "NMI_INTERRUPT_UNKNOWN",
1820 "UCODE_VERSION_MISMATCH",
1821 "HW_ERROR_ABS_LOCK",
1822 "HW_ERROR_CAL_LOCK_FAIL",
1823 "NMI_INTERRUPT_INST_ACTION_PT",
1824 "NMI_INTERRUPT_DATA_ACTION_PT",
1826 "NMI_INTERRUPT_TRM",
1827 "NMI_INTERRUPT_BREAK_POINT"
1832 "ADVANCED SYSASSERT"
1835 static const char *desc_lookup(int i)
1837 int max = ARRAY_SIZE(desc_lookup_text) - 1;
1839 if (i < 0 || i > max)
1842 return desc_lookup_text[i];
1845 #define ERROR_START_OFFSET (1 * sizeof(u32))
1846 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
1848 void iwl_dump_nic_error_log(struct iwl_priv *priv)
1851 u32 desc, time, count, base, data1;
1852 u32 blink1, blink2, ilink1, ilink2;
1855 if (priv->ucode_type == UCODE_INIT)
1856 base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
1858 base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
1860 if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
1862 "Not valid error log pointer 0x%08X for %s uCode\n",
1863 base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
1867 count = iwl_read_targ_mem(priv, base);
1869 if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
1870 IWL_ERR(priv, "Start IWL Error Log Dump:\n");
1871 IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
1872 priv->status, count);
1875 desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
1876 pc = iwl_read_targ_mem(priv, base + 2 * sizeof(u32));
1877 blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
1878 blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
1879 ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
1880 ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
1881 data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
1882 data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
1883 line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
1884 time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
1885 hcmd = iwl_read_targ_mem(priv, base + 22 * sizeof(u32));
1887 trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, data2, line,
1888 blink1, blink2, ilink1, ilink2);
1890 IWL_ERR(priv, "Desc Time "
1891 "data1 data2 line\n");
1892 IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
1893 desc_lookup(desc), desc, time, data1, data2, line);
1894 IWL_ERR(priv, "pc blink1 blink2 ilink1 ilink2 hcmd\n");
1895 IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n",
1896 pc, blink1, blink2, ilink1, ilink2, hcmd);
1899 #define EVENT_START_OFFSET (4 * sizeof(u32))
1902 * iwl_print_event_log - Dump error event log to syslog
1905 static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
1906 u32 num_events, u32 mode,
1907 int pos, char **buf, size_t bufsz)
1910 u32 base; /* SRAM byte address of event log header */
1911 u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
1912 u32 ptr; /* SRAM byte address of log data */
1913 u32 ev, time, data; /* event log data */
1914 unsigned long reg_flags;
1916 if (num_events == 0)
1918 if (priv->ucode_type == UCODE_INIT)
1919 base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
1921 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
1924 event_size = 2 * sizeof(u32);
1926 event_size = 3 * sizeof(u32);
1928 ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
1930 /* Make sure device is powered up for SRAM reads */
1931 spin_lock_irqsave(&priv->reg_lock, reg_flags);
1932 iwl_grab_nic_access(priv);
1934 /* Set starting address; reads will auto-increment */
1935 _iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
1938 /* "time" is actually "data" for mode 0 (no timestamp).
1939 * place event id # at far right for easier visual parsing. */
1940 for (i = 0; i < num_events; i++) {
1941 ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1942 time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1946 pos += scnprintf(*buf + pos, bufsz - pos,
1947 "EVT_LOG:0x%08x:%04u\n",
1950 trace_iwlwifi_dev_ucode_event(priv, 0,
1952 IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n",
1956 data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1958 pos += scnprintf(*buf + pos, bufsz - pos,
1959 "EVT_LOGT:%010u:0x%08x:%04u\n",
1962 IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
1964 trace_iwlwifi_dev_ucode_event(priv, time,
1970 /* Allow device to power down */
1971 iwl_release_nic_access(priv);
1972 spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
1977 * iwl_print_last_event_logs - Dump the newest # of event log to syslog
1979 static int iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
1980 u32 num_wraps, u32 next_entry,
1982 int pos, char **buf, size_t bufsz)
1985 * display the newest DEFAULT_LOG_ENTRIES entries
1986 * i.e the entries just before the next ont that uCode would fill.
1989 if (next_entry < size) {
1990 pos = iwl_print_event_log(priv,
1991 capacity - (size - next_entry),
1992 size - next_entry, mode,
1994 pos = iwl_print_event_log(priv, 0,
1998 pos = iwl_print_event_log(priv, next_entry - size,
1999 size, mode, pos, buf, bufsz);
2001 if (next_entry < size) {
2002 pos = iwl_print_event_log(priv, 0, next_entry,
2003 mode, pos, buf, bufsz);
2005 pos = iwl_print_event_log(priv, next_entry - size,
2006 size, mode, pos, buf, bufsz);
2012 #define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
2014 int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
2015 char **buf, bool display)
2017 u32 base; /* SRAM byte address of event log header */
2018 u32 capacity; /* event log capacity in # entries */
2019 u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
2020 u32 num_wraps; /* # times uCode wrapped to top of log */
2021 u32 next_entry; /* index of next entry to be written by uCode */
2022 u32 size; /* # entries that we'll print */
2026 if (priv->ucode_type == UCODE_INIT)
2027 base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
2029 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
2031 if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
2033 "Invalid event log pointer 0x%08X for %s uCode\n",
2034 base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
2038 /* event log header */
2039 capacity = iwl_read_targ_mem(priv, base);
2040 mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
2041 num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
2042 next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
2044 if (capacity > priv->cfg->max_event_log_size) {
2045 IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n",
2046 capacity, priv->cfg->max_event_log_size);
2047 capacity = priv->cfg->max_event_log_size;
2050 if (next_entry > priv->cfg->max_event_log_size) {
2051 IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
2052 next_entry, priv->cfg->max_event_log_size);
2053 next_entry = priv->cfg->max_event_log_size;
2056 size = num_wraps ? capacity : next_entry;
2058 /* bail out if nothing in log */
2060 IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
2064 #ifdef CONFIG_IWLWIFI_DEBUG
2065 if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log)
2066 size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
2067 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
2069 size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
2070 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
2072 IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n",
2075 #ifdef CONFIG_IWLWIFI_DEBUG
2078 bufsz = capacity * 48;
2081 *buf = kmalloc(bufsz, GFP_KERNEL);
2085 if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
2087 * if uCode has wrapped back to top of log,
2088 * start at the oldest entry,
2089 * i.e the next one that uCode would fill.
2092 pos = iwl_print_event_log(priv, next_entry,
2093 capacity - next_entry, mode,
2095 /* (then/else) start at top of log */
2096 pos = iwl_print_event_log(priv, 0,
2097 next_entry, mode, pos, buf, bufsz);
2099 pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
2100 next_entry, size, mode,
2103 pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
2104 next_entry, size, mode,
2111 * iwl_alive_start - called after REPLY_ALIVE notification received
2112 * from protocol/runtime uCode (initialization uCode's
2113 * Alive gets handled by iwl_init_alive_start()).
2115 static void iwl_alive_start(struct iwl_priv *priv)
2119 IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
2121 if (priv->card_alive.is_valid != UCODE_VALID_OK) {
2122 /* We had an error bringing up the hardware, so take it
2123 * all the way back down so we can try again */
2124 IWL_DEBUG_INFO(priv, "Alive failed.\n");
2128 /* Initialize uCode has loaded Runtime uCode ... verify inst image.
2129 * This is a paranoid check, because we would not have gotten the
2130 * "runtime" alive if code weren't properly loaded. */
2131 if (iwl_verify_ucode(priv)) {
2132 /* Runtime instruction load was bad;
2133 * take it all the way back down so we can try again */
2134 IWL_DEBUG_INFO(priv, "Bad runtime uCode load.\n");
2138 ret = priv->cfg->ops->lib->alive_notify(priv);
2141 "Could not complete ALIVE transition [ntf]: %d\n", ret);
2145 /* After the ALIVE response, we can send host commands to the uCode */
2146 set_bit(STATUS_ALIVE, &priv->status);
2148 if (priv->cfg->ops->lib->recover_from_tx_stall) {
2149 /* Enable timer to monitor the driver queues */
2150 mod_timer(&priv->monitor_recover,
2152 msecs_to_jiffies(priv->cfg->monitor_recover_period));
2155 if (iwl_is_rfkill(priv))
2158 ieee80211_wake_queues(priv->hw);
2160 priv->active_rate = IWL_RATES_MASK;
2162 /* Configure Tx antenna selection based on H/W config */
2163 if (priv->cfg->ops->hcmd->set_tx_ant)
2164 priv->cfg->ops->hcmd->set_tx_ant(priv, priv->cfg->valid_tx_ant);
2166 if (iwl_is_associated(priv)) {
2167 struct iwl_rxon_cmd *active_rxon =
2168 (struct iwl_rxon_cmd *)&priv->active_rxon;
2169 /* apply any changes in staging */
2170 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
2171 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2173 /* Initialize our rx_config data */
2174 iwl_connection_init_rx_config(priv, priv->iw_mode);
2176 if (priv->cfg->ops->hcmd->set_rxon_chain)
2177 priv->cfg->ops->hcmd->set_rxon_chain(priv);
2179 memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN);
2182 /* Configure Bluetooth device coexistence support */
2183 priv->cfg->ops->hcmd->send_bt_config(priv);
2185 iwl_reset_run_time_calib(priv);
2187 /* Configure the adapter for unassociated operation */
2188 iwlcore_commit_rxon(priv);
2190 /* At this point, the NIC is initialized and operational */
2191 iwl_rf_kill_ct_config(priv);
2193 iwl_leds_init(priv);
2195 IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
2196 set_bit(STATUS_READY, &priv->status);
2197 wake_up_interruptible(&priv->wait_command_queue);
2199 iwl_power_update_mode(priv, true);
2200 IWL_DEBUG_INFO(priv, "Updated power mode\n");
2206 queue_work(priv->workqueue, &priv->restart);
2209 static void iwl_cancel_deferred_work(struct iwl_priv *priv);
2211 static void __iwl_down(struct iwl_priv *priv)
2213 unsigned long flags;
2214 int exit_pending = test_bit(STATUS_EXIT_PENDING, &priv->status);
2216 IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
2219 set_bit(STATUS_EXIT_PENDING, &priv->status);
2221 iwl_clear_ucode_stations(priv, true);
2223 /* Unblock any waiting calls */
2224 wake_up_interruptible_all(&priv->wait_command_queue);
2226 /* Wipe out the EXIT_PENDING status bit if we are not actually
2227 * exiting the module */
2229 clear_bit(STATUS_EXIT_PENDING, &priv->status);
2231 /* stop and reset the on-board processor */
2232 iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
2234 /* tell the device to stop sending interrupts */
2235 spin_lock_irqsave(&priv->lock, flags);
2236 iwl_disable_interrupts(priv);
2237 spin_unlock_irqrestore(&priv->lock, flags);
2238 iwl_synchronize_irq(priv);
2240 if (priv->mac80211_registered)
2241 ieee80211_stop_queues(priv->hw);
2243 /* If we have not previously called iwl_init() then
2244 * clear all bits but the RF Kill bit and return */
2245 if (!iwl_is_init(priv)) {
2246 priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
2248 test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
2249 STATUS_GEO_CONFIGURED |
2250 test_bit(STATUS_EXIT_PENDING, &priv->status) <<
2251 STATUS_EXIT_PENDING;
2255 /* ...otherwise clear out all the status bits but the RF Kill
2256 * bit and continue taking the NIC down. */
2257 priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
2259 test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
2260 STATUS_GEO_CONFIGURED |
2261 test_bit(STATUS_FW_ERROR, &priv->status) <<
2263 test_bit(STATUS_EXIT_PENDING, &priv->status) <<
2264 STATUS_EXIT_PENDING;
2266 /* device going down, Stop using ICT table */
2267 iwl_disable_ict(priv);
2269 iwlagn_txq_ctx_stop(priv);
2270 iwlagn_rxq_stop(priv);
2272 /* Power-down device's busmaster DMA clocks */
2273 iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
2276 /* Make sure (redundant) we've released our request to stay awake */
2277 iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
2279 /* Stop the device, and put it in low power state */
2280 priv->cfg->ops->lib->apm_ops.stop(priv);
2283 memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
2285 if (priv->ibss_beacon)
2286 dev_kfree_skb(priv->ibss_beacon);
2287 priv->ibss_beacon = NULL;
2289 /* clear out any free frames */
2290 iwl_clear_free_frames(priv);
2293 static void iwl_down(struct iwl_priv *priv)
2295 mutex_lock(&priv->mutex);
2297 mutex_unlock(&priv->mutex);
2299 iwl_cancel_deferred_work(priv);
2302 #define HW_READY_TIMEOUT (50)
2304 static int iwl_set_hw_ready(struct iwl_priv *priv)
2308 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
2309 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
2311 /* See if we got it */
2312 ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
2313 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
2314 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
2316 if (ret != -ETIMEDOUT)
2317 priv->hw_ready = true;
2319 priv->hw_ready = false;
2321 IWL_DEBUG_INFO(priv, "hardware %s\n",
2322 (priv->hw_ready == 1) ? "ready" : "not ready");
2326 static int iwl_prepare_card_hw(struct iwl_priv *priv)
2330 IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter\n");
2332 ret = iwl_set_hw_ready(priv);
2336 /* If HW is not ready, prepare the conditions to check again */
2337 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
2338 CSR_HW_IF_CONFIG_REG_PREPARE);
2340 ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
2341 ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
2342 CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
2344 /* HW should be ready by now, check again. */
2345 if (ret != -ETIMEDOUT)
2346 iwl_set_hw_ready(priv);
2351 #define MAX_HW_RESTARTS 5
2353 static int __iwl_up(struct iwl_priv *priv)
2358 if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
2359 IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
2363 if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
2364 IWL_ERR(priv, "ucode not available for device bringup\n");
2368 iwl_prepare_card_hw(priv);
2370 if (!priv->hw_ready) {
2371 IWL_WARN(priv, "Exit HW not ready\n");
2375 /* If platform's RF_KILL switch is NOT set to KILL */
2376 if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
2377 clear_bit(STATUS_RF_KILL_HW, &priv->status);
2379 set_bit(STATUS_RF_KILL_HW, &priv->status);
2381 if (iwl_is_rfkill(priv)) {
2382 wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
2384 iwl_enable_interrupts(priv);
2385 IWL_WARN(priv, "Radio disabled by HW RF Kill switch\n");
2389 iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2391 ret = iwlagn_hw_nic_init(priv);
2393 IWL_ERR(priv, "Unable to init nic\n");
2397 /* make sure rfkill handshake bits are cleared */
2398 iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2399 iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
2400 CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
2402 /* clear (again), then enable host interrupts */
2403 iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2404 iwl_enable_interrupts(priv);
2406 /* really make sure rfkill handshake bits are cleared */
2407 iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2408 iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
2410 /* Copy original ucode data image from disk into backup cache.
2411 * This will be used to initialize the on-board processor's
2412 * data SRAM for a clean start when the runtime program first loads. */
2413 memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
2414 priv->ucode_data.len);
2416 for (i = 0; i < MAX_HW_RESTARTS; i++) {
2418 /* load bootstrap state machine,
2419 * load bootstrap program into processor's memory,
2420 * prepare to load the "initialize" uCode */
2421 ret = priv->cfg->ops->lib->load_ucode(priv);
2424 IWL_ERR(priv, "Unable to set up bootstrap uCode: %d\n",
2429 /* start card; "initialize" will load runtime ucode */
2430 iwl_nic_start(priv);
2432 IWL_DEBUG_INFO(priv, DRV_NAME " is coming up\n");
2437 set_bit(STATUS_EXIT_PENDING, &priv->status);
2439 clear_bit(STATUS_EXIT_PENDING, &priv->status);
2441 /* tried to restart and config the device for as long as our
2442 * patience could withstand */
2443 IWL_ERR(priv, "Unable to initialize device after %d attempts.\n", i);
2448 /*****************************************************************************
2450 * Workqueue callbacks
2452 *****************************************************************************/
2454 static void iwl_bg_init_alive_start(struct work_struct *data)
2456 struct iwl_priv *priv =
2457 container_of(data, struct iwl_priv, init_alive_start.work);
2459 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2462 mutex_lock(&priv->mutex);
2463 priv->cfg->ops->lib->init_alive_start(priv);
2464 mutex_unlock(&priv->mutex);
2467 static void iwl_bg_alive_start(struct work_struct *data)
2469 struct iwl_priv *priv =
2470 container_of(data, struct iwl_priv, alive_start.work);
2472 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2475 /* enable dram interrupt */
2476 iwl_reset_ict(priv);
2478 mutex_lock(&priv->mutex);
2479 iwl_alive_start(priv);
2480 mutex_unlock(&priv->mutex);
2483 static void iwl_bg_run_time_calib_work(struct work_struct *work)
2485 struct iwl_priv *priv = container_of(work, struct iwl_priv,
2486 run_time_calib_work);
2488 mutex_lock(&priv->mutex);
2490 if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
2491 test_bit(STATUS_SCANNING, &priv->status)) {
2492 mutex_unlock(&priv->mutex);
2496 if (priv->start_calib) {
2497 iwl_chain_noise_calibration(priv, &priv->statistics);
2499 iwl_sensitivity_calibration(priv, &priv->statistics);
2502 mutex_unlock(&priv->mutex);
2506 static void iwl_bg_restart(struct work_struct *data)
2508 struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
2510 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2513 if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
2514 mutex_lock(&priv->mutex);
2517 mutex_unlock(&priv->mutex);
2519 ieee80211_restart_hw(priv->hw);
2523 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2526 mutex_lock(&priv->mutex);
2528 mutex_unlock(&priv->mutex);
2532 static void iwl_bg_rx_replenish(struct work_struct *data)
2534 struct iwl_priv *priv =
2535 container_of(data, struct iwl_priv, rx_replenish);
2537 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2540 mutex_lock(&priv->mutex);
2541 iwlagn_rx_replenish(priv);
2542 mutex_unlock(&priv->mutex);
2545 #define IWL_DELAY_NEXT_SCAN (HZ*2)
2547 void iwl_post_associate(struct iwl_priv *priv)
2549 struct ieee80211_conf *conf = NULL;
2552 if (priv->iw_mode == NL80211_IFTYPE_AP) {
2553 IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__);
2557 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2561 if (!priv->vif || !priv->is_open)
2564 iwl_scan_cancel_timeout(priv, 200);
2566 conf = ieee80211_get_hw_conf(priv->hw);
2568 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2569 iwlcore_commit_rxon(priv);
2571 iwl_setup_rxon_timing(priv);
2572 ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
2573 sizeof(priv->rxon_timing), &priv->rxon_timing);
2575 IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
2576 "Attempting to continue.\n");
2578 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
2580 iwl_set_rxon_ht(priv, &priv->current_ht_config);
2582 if (priv->cfg->ops->hcmd->set_rxon_chain)
2583 priv->cfg->ops->hcmd->set_rxon_chain(priv);
2585 priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
2587 IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
2588 priv->assoc_id, priv->beacon_int);
2590 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
2591 priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
2593 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
2595 if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
2596 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME)
2597 priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK;
2599 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2601 if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
2602 priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
2606 iwlcore_commit_rxon(priv);
2608 IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
2609 priv->assoc_id, priv->active_rxon.bssid_addr);
2611 switch (priv->iw_mode) {
2612 case NL80211_IFTYPE_STATION:
2614 case NL80211_IFTYPE_ADHOC:
2615 /* assume default assoc id */
2617 iwl_send_beacon_cmd(priv);
2620 IWL_ERR(priv, "%s Should not be called in %d mode\n",
2621 __func__, priv->iw_mode);
2625 /* the chain noise calibration will enabled PM upon completion
2626 * If chain noise has already been run, then we need to enable
2627 * power management here */
2628 if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
2629 iwl_power_update_mode(priv, false);
2631 /* Enable Rx differential gain and sensitivity calibrations */
2632 iwl_chain_noise_reset(priv);
2633 priv->start_calib = 1;
2637 /*****************************************************************************
2639 * mac80211 entry point functions
2641 *****************************************************************************/
2643 #define UCODE_READY_TIMEOUT (4 * HZ)
2646 * Not a mac80211 entry point function, but it fits in with all the
2647 * other mac80211 functions grouped here.
2649 static int iwl_mac_setup_register(struct iwl_priv *priv)
2652 struct ieee80211_hw *hw = priv->hw;
2653 hw->rate_control_algorithm = "iwl-agn-rs";
2655 /* Tell mac80211 our characteristics */
2656 hw->flags = IEEE80211_HW_SIGNAL_DBM |
2657 IEEE80211_HW_AMPDU_AGGREGATION |
2658 IEEE80211_HW_SPECTRUM_MGMT;
2660 if (!priv->cfg->broken_powersave)
2661 hw->flags |= IEEE80211_HW_SUPPORTS_PS |
2662 IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
2664 if (priv->cfg->sku & IWL_SKU_N)
2665 hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
2666 IEEE80211_HW_SUPPORTS_STATIC_SMPS;
2668 hw->sta_data_size = sizeof(struct iwl_station_priv);
2669 hw->wiphy->interface_modes =
2670 BIT(NL80211_IFTYPE_STATION) |
2671 BIT(NL80211_IFTYPE_ADHOC);
2673 hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
2674 WIPHY_FLAG_DISABLE_BEACON_HINTS;
2677 * For now, disable PS by default because it affects
2678 * RX performance significantly.
2680 hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
2682 hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
2683 /* we create the 802.11 header and a zero-length SSID element */
2684 hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
2686 /* Default value; 4 EDCA QOS priorities */
2689 hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
2691 if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
2692 priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
2693 &priv->bands[IEEE80211_BAND_2GHZ];
2694 if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
2695 priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
2696 &priv->bands[IEEE80211_BAND_5GHZ];
2698 ret = ieee80211_register_hw(priv->hw);
2700 IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
2703 priv->mac80211_registered = 1;
2709 static int iwl_mac_start(struct ieee80211_hw *hw)
2711 struct iwl_priv *priv = hw->priv;
2714 IWL_DEBUG_MAC80211(priv, "enter\n");
2716 /* we should be verifying the device is ready to be opened */
2717 mutex_lock(&priv->mutex);
2718 ret = __iwl_up(priv);
2719 mutex_unlock(&priv->mutex);
2724 if (iwl_is_rfkill(priv))
2727 IWL_DEBUG_INFO(priv, "Start UP work done.\n");
2729 /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
2730 * mac80211 will not be run successfully. */
2731 ret = wait_event_interruptible_timeout(priv->wait_command_queue,
2732 test_bit(STATUS_READY, &priv->status),
2733 UCODE_READY_TIMEOUT);
2735 if (!test_bit(STATUS_READY, &priv->status)) {
2736 IWL_ERR(priv, "START_ALIVE timeout after %dms.\n",
2737 jiffies_to_msecs(UCODE_READY_TIMEOUT));
2742 iwl_led_start(priv);
2746 IWL_DEBUG_MAC80211(priv, "leave\n");
2750 static void iwl_mac_stop(struct ieee80211_hw *hw)
2752 struct iwl_priv *priv = hw->priv;
2754 IWL_DEBUG_MAC80211(priv, "enter\n");
2761 if (iwl_is_ready_rf(priv) || test_bit(STATUS_SCAN_HW, &priv->status)) {
2762 /* stop mac, cancel any scan request and clear
2763 * RXON_FILTER_ASSOC_MSK BIT
2765 mutex_lock(&priv->mutex);
2766 iwl_scan_cancel_timeout(priv, 100);
2767 mutex_unlock(&priv->mutex);
2772 flush_workqueue(priv->workqueue);
2774 /* enable interrupts again in order to receive rfkill changes */
2775 iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2776 iwl_enable_interrupts(priv);
2778 IWL_DEBUG_MAC80211(priv, "leave\n");
2781 static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
2783 struct iwl_priv *priv = hw->priv;
2785 IWL_DEBUG_MACDUMP(priv, "enter\n");
2787 IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
2788 ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
2790 if (iwlagn_tx_skb(priv, skb))
2791 dev_kfree_skb_any(skb);
2793 IWL_DEBUG_MACDUMP(priv, "leave\n");
2794 return NETDEV_TX_OK;
2797 void iwl_config_ap(struct iwl_priv *priv)
2801 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2804 /* The following should be done only at AP bring up */
2805 if (!iwl_is_associated(priv)) {
2807 /* RXON - unassoc (to set timing command) */
2808 priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2809 iwlcore_commit_rxon(priv);
2812 iwl_setup_rxon_timing(priv);
2813 ret = iwl_send_cmd_pdu(priv, REPLY_RXON_TIMING,
2814 sizeof(priv->rxon_timing), &priv->rxon_timing);
2816 IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
2817 "Attempting to continue.\n");
2819 /* AP has all antennas */
2820 priv->chain_noise_data.active_chains =
2821 priv->hw_params.valid_rx_ant;
2822 iwl_set_rxon_ht(priv, &priv->current_ht_config);
2823 if (priv->cfg->ops->hcmd->set_rxon_chain)
2824 priv->cfg->ops->hcmd->set_rxon_chain(priv);
2826 /* FIXME: what should be the assoc_id for AP? */
2827 priv->staging_rxon.assoc_id = cpu_to_le16(priv->assoc_id);
2828 if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_PREAMBLE)
2829 priv->staging_rxon.flags |=
2830 RXON_FLG_SHORT_PREAMBLE_MSK;
2832 priv->staging_rxon.flags &=
2833 ~RXON_FLG_SHORT_PREAMBLE_MSK;
2835 if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) {
2836 if (priv->assoc_capability &
2837 WLAN_CAPABILITY_SHORT_SLOT_TIME)
2838 priv->staging_rxon.flags |=
2839 RXON_FLG_SHORT_SLOT_MSK;
2841 priv->staging_rxon.flags &=
2842 ~RXON_FLG_SHORT_SLOT_MSK;
2844 if (priv->iw_mode == NL80211_IFTYPE_ADHOC)
2845 priv->staging_rxon.flags &=
2846 ~RXON_FLG_SHORT_SLOT_MSK;
2848 /* restore RXON assoc */
2849 priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
2850 iwlcore_commit_rxon(priv);
2851 iwl_add_bcast_station(priv);
2853 iwl_send_beacon_cmd(priv);
2855 /* FIXME - we need to add code here to detect a totally new
2856 * configuration, reset the AP, unassoc, rxon timing, assoc,
2857 * clear sta table, add BCAST sta... */
2860 static void iwl_mac_update_tkip_key(struct ieee80211_hw *hw,
2861 struct ieee80211_vif *vif,
2862 struct ieee80211_key_conf *keyconf,
2863 struct ieee80211_sta *sta,
2864 u32 iv32, u16 *phase1key)
2867 struct iwl_priv *priv = hw->priv;
2868 IWL_DEBUG_MAC80211(priv, "enter\n");
2870 iwl_update_tkip_key(priv, keyconf,
2871 sta ? sta->addr : iwl_bcast_addr,
2874 IWL_DEBUG_MAC80211(priv, "leave\n");
2877 static int iwl_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2878 struct ieee80211_vif *vif,
2879 struct ieee80211_sta *sta,
2880 struct ieee80211_key_conf *key)
2882 struct iwl_priv *priv = hw->priv;
2886 bool is_default_wep_key = false;
2888 IWL_DEBUG_MAC80211(priv, "enter\n");
2890 if (priv->cfg->mod_params->sw_crypto) {
2891 IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
2894 addr = sta ? sta->addr : iwl_bcast_addr;
2895 sta_id = iwl_find_station(priv, addr);
2896 if (sta_id == IWL_INVALID_STATION) {
2897 IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n",
2903 mutex_lock(&priv->mutex);
2904 iwl_scan_cancel_timeout(priv, 100);
2907 * If we are getting WEP group key and we didn't receive any key mapping
2908 * so far, we are in legacy wep mode (group key only), otherwise we are
2910 * In legacy wep mode, we use another host command to the uCode.
2912 if (key->alg == ALG_WEP && !sta && vif->type != NL80211_IFTYPE_AP) {
2914 is_default_wep_key = !priv->key_mapping_key;
2916 is_default_wep_key =
2917 (key->hw_key_idx == HW_KEY_DEFAULT);
2922 if (is_default_wep_key)
2923 ret = iwl_set_default_wep_key(priv, key);
2925 ret = iwl_set_dynamic_key(priv, key, sta_id);
2927 IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
2930 if (is_default_wep_key)
2931 ret = iwl_remove_default_wep_key(priv, key);
2933 ret = iwl_remove_dynamic_key(priv, key, sta_id);
2935 IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
2941 mutex_unlock(&priv->mutex);
2942 IWL_DEBUG_MAC80211(priv, "leave\n");
2947 static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
2948 struct ieee80211_vif *vif,
2949 enum ieee80211_ampdu_mlme_action action,
2950 struct ieee80211_sta *sta, u16 tid, u16 *ssn)
2952 struct iwl_priv *priv = hw->priv;
2955 IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
2958 if (!(priv->cfg->sku & IWL_SKU_N))
2962 case IEEE80211_AMPDU_RX_START:
2963 IWL_DEBUG_HT(priv, "start Rx\n");
2964 return iwl_sta_rx_agg_start(priv, sta->addr, tid, *ssn);
2965 case IEEE80211_AMPDU_RX_STOP:
2966 IWL_DEBUG_HT(priv, "stop Rx\n");
2967 ret = iwl_sta_rx_agg_stop(priv, sta->addr, tid);
2968 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2972 case IEEE80211_AMPDU_TX_START:
2973 IWL_DEBUG_HT(priv, "start Tx\n");
2974 ret = iwlagn_tx_agg_start(priv, sta->addr, tid, ssn);
2976 priv->_agn.agg_tids_count++;
2977 IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n",
2978 priv->_agn.agg_tids_count);
2981 case IEEE80211_AMPDU_TX_STOP:
2982 IWL_DEBUG_HT(priv, "stop Tx\n");
2983 ret = iwlagn_tx_agg_stop(priv, sta->addr, tid);
2984 if ((ret == 0) && (priv->_agn.agg_tids_count > 0)) {
2985 priv->_agn.agg_tids_count--;
2986 IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n",
2987 priv->_agn.agg_tids_count);
2989 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2993 case IEEE80211_AMPDU_TX_OPERATIONAL:
2997 IWL_DEBUG_HT(priv, "unknown\n");
3004 static void iwl_mac_sta_notify(struct ieee80211_hw *hw,
3005 struct ieee80211_vif *vif,
3006 enum sta_notify_cmd cmd,
3007 struct ieee80211_sta *sta)
3009 struct iwl_priv *priv = hw->priv;
3010 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
3014 case STA_NOTIFY_SLEEP:
3015 WARN_ON(!sta_priv->client);
3016 sta_priv->asleep = true;
3017 if (atomic_read(&sta_priv->pending_frames) > 0)
3018 ieee80211_sta_block_awake(hw, sta, true);
3020 case STA_NOTIFY_AWAKE:
3021 WARN_ON(!sta_priv->client);
3022 if (!sta_priv->asleep)
3024 sta_priv->asleep = false;
3025 sta_id = iwl_find_station(priv, sta->addr);
3026 if (sta_id != IWL_INVALID_STATION)
3027 iwl_sta_modify_ps_wake(priv, sta_id);
3034 static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
3035 struct ieee80211_vif *vif,
3036 struct ieee80211_sta *sta)
3038 struct iwl_priv *priv = hw->priv;
3039 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
3040 bool is_ap = priv->iw_mode == NL80211_IFTYPE_STATION;
3044 IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
3047 atomic_set(&sta_priv->pending_frames, 0);
3048 if (vif->type == NL80211_IFTYPE_AP)
3049 sta_priv->client = true;
3051 ret = iwl_add_station_common(priv, sta->addr, is_ap, &sta->ht_cap,
3054 IWL_ERR(priv, "Unable to add station %pM (%d)\n",
3056 /* Should we return success if return code is EEXIST ? */
3060 /* Initialize rate scaling */
3061 IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
3063 iwl_rs_rate_init(priv, sta, sta_id);
3068 /*****************************************************************************
3072 *****************************************************************************/
3074 #ifdef CONFIG_IWLWIFI_DEBUG
3077 * The following adds a new attribute to the sysfs representation
3078 * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
3079 * used for controlling the debug level.
3081 * See the level definitions in iwl for details.
3083 * The debug_level being managed using sysfs below is a per device debug
3084 * level that is used instead of the global debug level if it (the per
3085 * device debug level) is set.
3087 static ssize_t show_debug_level(struct device *d,
3088 struct device_attribute *attr, char *buf)
3090 struct iwl_priv *priv = dev_get_drvdata(d);
3091 return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
3093 static ssize_t store_debug_level(struct device *d,
3094 struct device_attribute *attr,
3095 const char *buf, size_t count)
3097 struct iwl_priv *priv = dev_get_drvdata(d);
3101 ret = strict_strtoul(buf, 0, &val);
3103 IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
3105 priv->debug_level = val;
3106 if (iwl_alloc_traffic_mem(priv))
3108 "Not enough memory to generate traffic log\n");
3110 return strnlen(buf, count);
3113 static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
3114 show_debug_level, store_debug_level);
3117 #endif /* CONFIG_IWLWIFI_DEBUG */
3120 static ssize_t show_temperature(struct device *d,
3121 struct device_attribute *attr, char *buf)
3123 struct iwl_priv *priv = dev_get_drvdata(d);
3125 if (!iwl_is_alive(priv))
3128 return sprintf(buf, "%d\n", priv->temperature);
3131 static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
3133 static ssize_t show_tx_power(struct device *d,
3134 struct device_attribute *attr, char *buf)
3136 struct iwl_priv *priv = dev_get_drvdata(d);
3138 if (!iwl_is_ready_rf(priv))
3139 return sprintf(buf, "off\n");
3141 return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
3144 static ssize_t store_tx_power(struct device *d,
3145 struct device_attribute *attr,
3146 const char *buf, size_t count)
3148 struct iwl_priv *priv = dev_get_drvdata(d);
3152 ret = strict_strtoul(buf, 10, &val);
3154 IWL_INFO(priv, "%s is not in decimal form.\n", buf);
3156 ret = iwl_set_tx_power(priv, val, false);
3158 IWL_ERR(priv, "failed setting tx power (0x%d).\n",
3166 static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
3168 static ssize_t show_rts_ht_protection(struct device *d,
3169 struct device_attribute *attr, char *buf)
3171 struct iwl_priv *priv = dev_get_drvdata(d);
3173 return sprintf(buf, "%s\n",
3174 priv->cfg->use_rts_for_ht ? "RTS/CTS" : "CTS-to-self");
3177 static ssize_t store_rts_ht_protection(struct device *d,
3178 struct device_attribute *attr,
3179 const char *buf, size_t count)
3181 struct iwl_priv *priv = dev_get_drvdata(d);
3185 ret = strict_strtoul(buf, 10, &val);
3187 IWL_INFO(priv, "Input is not in decimal form.\n");
3189 if (!iwl_is_associated(priv))
3190 priv->cfg->use_rts_for_ht = val ? true : false;
3192 IWL_ERR(priv, "Sta associated with AP - "
3193 "Change protection mechanism is not allowed\n");
3199 static DEVICE_ATTR(rts_ht_protection, S_IWUSR | S_IRUGO,
3200 show_rts_ht_protection, store_rts_ht_protection);
3203 /*****************************************************************************
3205 * driver setup and teardown
3207 *****************************************************************************/
3209 static void iwl_setup_deferred_work(struct iwl_priv *priv)
3211 priv->workqueue = create_singlethread_workqueue(DRV_NAME);
3213 init_waitqueue_head(&priv->wait_command_queue);
3215 INIT_WORK(&priv->restart, iwl_bg_restart);
3216 INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish);
3217 INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
3218 INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
3219 INIT_DELAYED_WORK(&priv->init_alive_start, iwl_bg_init_alive_start);
3220 INIT_DELAYED_WORK(&priv->alive_start, iwl_bg_alive_start);
3222 iwl_setup_scan_deferred_work(priv);
3224 if (priv->cfg->ops->lib->setup_deferred_work)
3225 priv->cfg->ops->lib->setup_deferred_work(priv);
3227 init_timer(&priv->statistics_periodic);
3228 priv->statistics_periodic.data = (unsigned long)priv;
3229 priv->statistics_periodic.function = iwl_bg_statistics_periodic;
3231 init_timer(&priv->ucode_trace);
3232 priv->ucode_trace.data = (unsigned long)priv;
3233 priv->ucode_trace.function = iwl_bg_ucode_trace;
3235 if (priv->cfg->ops->lib->recover_from_tx_stall) {
3236 init_timer(&priv->monitor_recover);
3237 priv->monitor_recover.data = (unsigned long)priv;
3238 priv->monitor_recover.function =
3239 priv->cfg->ops->lib->recover_from_tx_stall;
3242 if (!priv->cfg->use_isr_legacy)
3243 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
3244 iwl_irq_tasklet, (unsigned long)priv);
3246 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
3247 iwl_irq_tasklet_legacy, (unsigned long)priv);
3250 static void iwl_cancel_deferred_work(struct iwl_priv *priv)
3252 if (priv->cfg->ops->lib->cancel_deferred_work)
3253 priv->cfg->ops->lib->cancel_deferred_work(priv);
3255 cancel_delayed_work_sync(&priv->init_alive_start);
3256 cancel_delayed_work(&priv->scan_check);
3257 cancel_work_sync(&priv->start_internal_scan);
3258 cancel_delayed_work(&priv->alive_start);
3259 cancel_work_sync(&priv->beacon_update);
3260 del_timer_sync(&priv->statistics_periodic);
3261 del_timer_sync(&priv->ucode_trace);
3262 if (priv->cfg->ops->lib->recover_from_tx_stall)
3263 del_timer_sync(&priv->monitor_recover);
3266 static void iwl_init_hw_rates(struct iwl_priv *priv,
3267 struct ieee80211_rate *rates)
3271 for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
3272 rates[i].bitrate = iwl_rates[i].ieee * 5;
3273 rates[i].hw_value = i; /* Rate scaling will work on indexes */
3274 rates[i].hw_value_short = i;
3276 if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
3278 * If CCK != 1M then set short preamble rate flag.
3281 (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
3282 0 : IEEE80211_RATE_SHORT_PREAMBLE;
3287 static int iwl_init_drv(struct iwl_priv *priv)
3291 priv->ibss_beacon = NULL;
3293 spin_lock_init(&priv->sta_lock);
3294 spin_lock_init(&priv->hcmd_lock);
3296 INIT_LIST_HEAD(&priv->free_frames);
3298 mutex_init(&priv->mutex);
3299 mutex_init(&priv->sync_cmd_mutex);
3301 priv->ieee_channels = NULL;
3302 priv->ieee_rates = NULL;
3303 priv->band = IEEE80211_BAND_2GHZ;
3305 priv->iw_mode = NL80211_IFTYPE_STATION;
3306 priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
3307 priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
3308 priv->_agn.agg_tids_count = 0;
3310 /* initialize force reset */
3311 priv->force_reset[IWL_RF_RESET].reset_duration =
3312 IWL_DELAY_NEXT_FORCE_RF_RESET;
3313 priv->force_reset[IWL_FW_RESET].reset_duration =
3314 IWL_DELAY_NEXT_FORCE_FW_RELOAD;
3316 /* Choose which receivers/antennas to use */
3317 if (priv->cfg->ops->hcmd->set_rxon_chain)
3318 priv->cfg->ops->hcmd->set_rxon_chain(priv);
3320 iwl_init_scan_params(priv);
3322 /* Set the tx_power_user_lmt to the lowest power level
3323 * this value will get overwritten by channel max power avg
3325 priv->tx_power_user_lmt = IWLAGN_TX_POWER_TARGET_POWER_MIN;
3327 ret = iwl_init_channel_map(priv);
3329 IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
3333 ret = iwlcore_init_geos(priv);
3335 IWL_ERR(priv, "initializing geos failed: %d\n", ret);
3336 goto err_free_channel_map;
3338 iwl_init_hw_rates(priv, priv->ieee_rates);
3342 err_free_channel_map:
3343 iwl_free_channel_map(priv);
3348 static void iwl_uninit_drv(struct iwl_priv *priv)
3350 iwl_calib_free_results(priv);
3351 iwlcore_free_geos(priv);
3352 iwl_free_channel_map(priv);
3353 kfree(priv->scan_cmd);
3356 static struct attribute *iwl_sysfs_entries[] = {
3357 &dev_attr_temperature.attr,
3358 &dev_attr_tx_power.attr,
3359 &dev_attr_rts_ht_protection.attr,
3360 #ifdef CONFIG_IWLWIFI_DEBUG
3361 &dev_attr_debug_level.attr,
3366 static struct attribute_group iwl_attribute_group = {
3367 .name = NULL, /* put in device directory */
3368 .attrs = iwl_sysfs_entries,
3371 static struct ieee80211_ops iwl_hw_ops = {
3373 .start = iwl_mac_start,
3374 .stop = iwl_mac_stop,
3375 .add_interface = iwl_mac_add_interface,
3376 .remove_interface = iwl_mac_remove_interface,
3377 .config = iwl_mac_config,
3378 .configure_filter = iwl_configure_filter,
3379 .set_key = iwl_mac_set_key,
3380 .update_tkip_key = iwl_mac_update_tkip_key,
3381 .conf_tx = iwl_mac_conf_tx,
3382 .reset_tsf = iwl_mac_reset_tsf,
3383 .bss_info_changed = iwl_bss_info_changed,
3384 .ampdu_action = iwl_mac_ampdu_action,
3385 .hw_scan = iwl_mac_hw_scan,
3386 .sta_notify = iwl_mac_sta_notify,
3387 .sta_add = iwlagn_mac_sta_add,
3388 .sta_remove = iwl_mac_sta_remove,
3391 static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
3394 struct iwl_priv *priv;
3395 struct ieee80211_hw *hw;
3396 struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
3397 unsigned long flags;
3400 /************************
3401 * 1. Allocating HW data
3402 ************************/
3404 /* Disabling hardware scan means that mac80211 will perform scans
3405 * "the hard way", rather than using device's scan. */
3406 if (cfg->mod_params->disable_hw_scan) {
3407 if (iwl_debug_level & IWL_DL_INFO)
3408 dev_printk(KERN_DEBUG, &(pdev->dev),
3409 "Disabling hw_scan\n");
3410 iwl_hw_ops.hw_scan = NULL;
3413 hw = iwl_alloc_all(cfg, &iwl_hw_ops);
3419 /* At this point both hw and priv are allocated. */
3421 SET_IEEE80211_DEV(hw, &pdev->dev);
3423 IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
3425 priv->pci_dev = pdev;
3426 priv->inta_mask = CSR_INI_SET_MASK;
3428 #ifdef CONFIG_IWLWIFI_DEBUG
3429 atomic_set(&priv->restrict_refcnt, 0);
3431 if (iwl_alloc_traffic_mem(priv))
3432 IWL_ERR(priv, "Not enough memory to generate traffic log\n");
3434 /**************************
3435 * 2. Initializing PCI bus
3436 **************************/
3437 if (pci_enable_device(pdev)) {
3439 goto out_ieee80211_free_hw;
3442 pci_set_master(pdev);
3444 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
3446 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36));
3448 err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
3450 err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
3451 /* both attempts failed: */
3453 IWL_WARN(priv, "No suitable DMA available.\n");
3454 goto out_pci_disable_device;
3458 err = pci_request_regions(pdev, DRV_NAME);
3460 goto out_pci_disable_device;
3462 pci_set_drvdata(pdev, priv);
3465 /***********************
3466 * 3. Read REV register
3467 ***********************/
3468 priv->hw_base = pci_iomap(pdev, 0, 0);
3469 if (!priv->hw_base) {
3471 goto out_pci_release_regions;
3474 IWL_DEBUG_INFO(priv, "pci_resource_len = 0x%08llx\n",
3475 (unsigned long long) pci_resource_len(pdev, 0));
3476 IWL_DEBUG_INFO(priv, "pci_resource_base = %p\n", priv->hw_base);
3478 /* these spin locks will be used in apm_ops.init and EEPROM access
3479 * we should init now
3481 spin_lock_init(&priv->reg_lock);
3482 spin_lock_init(&priv->lock);
3485 * stop and reset the on-board processor just in case it is in a
3486 * strange state ... like being left stranded by a primary kernel
3487 * and this is now the kdump kernel trying to start up
3489 iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
3491 iwl_hw_detect(priv);
3492 IWL_INFO(priv, "Detected %s, REV=0x%X\n",
3493 priv->cfg->name, priv->hw_rev);
3495 /* We disable the RETRY_TIMEOUT register (0x41) to keep
3496 * PCI Tx retries from interfering with C3 CPU state */
3497 pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
3499 iwl_prepare_card_hw(priv);
3500 if (!priv->hw_ready) {
3501 IWL_WARN(priv, "Failed, HW not ready\n");
3508 /* Read the EEPROM */
3509 err = iwl_eeprom_init(priv);
3511 IWL_ERR(priv, "Unable to init EEPROM\n");
3514 err = iwl_eeprom_check_version(priv);
3516 goto out_free_eeprom;
3518 /* extract MAC Address */
3519 iwl_eeprom_get_mac(priv, priv->mac_addr);
3520 IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->mac_addr);
3521 SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
3523 /************************
3524 * 5. Setup HW constants
3525 ************************/
3526 if (iwl_set_hw_params(priv)) {
3527 IWL_ERR(priv, "failed to set hw parameters\n");
3528 goto out_free_eeprom;
3531 /*******************
3533 *******************/
3535 err = iwl_init_drv(priv);
3537 goto out_free_eeprom;
3538 /* At this point both hw and priv are initialized. */
3540 /********************
3542 ********************/
3543 spin_lock_irqsave(&priv->lock, flags);
3544 iwl_disable_interrupts(priv);
3545 spin_unlock_irqrestore(&priv->lock, flags);
3547 pci_enable_msi(priv->pci_dev);
3549 iwl_alloc_isr_ict(priv);
3550 err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr,
3551 IRQF_SHARED, DRV_NAME, priv);
3553 IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
3554 goto out_disable_msi;
3556 err = sysfs_create_group(&pdev->dev.kobj, &iwl_attribute_group);
3558 IWL_ERR(priv, "failed to create sysfs device attributes\n");
3562 iwl_setup_deferred_work(priv);
3563 iwl_setup_rx_handlers(priv);
3565 /*********************************************
3566 * 8. Enable interrupts and read RFKILL state
3567 *********************************************/
3569 /* enable interrupts if needed: hw bug w/a */
3570 pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
3571 if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
3572 pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
3573 pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd);
3576 iwl_enable_interrupts(priv);
3578 /* If platform's RF_KILL switch is NOT set to KILL */
3579 if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
3580 clear_bit(STATUS_RF_KILL_HW, &priv->status);
3582 set_bit(STATUS_RF_KILL_HW, &priv->status);
3584 wiphy_rfkill_set_hw_state(priv->hw->wiphy,
3585 test_bit(STATUS_RF_KILL_HW, &priv->status));
3587 iwl_power_initialize(priv);
3588 iwl_tt_initialize(priv);
3590 init_completion(&priv->_agn.firmware_loading_complete);
3592 err = iwl_request_firmware(priv, true);
3594 goto out_remove_sysfs;
3599 destroy_workqueue(priv->workqueue);
3600 priv->workqueue = NULL;
3601 sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
3603 free_irq(priv->pci_dev->irq, priv);
3604 iwl_free_isr_ict(priv);
3606 pci_disable_msi(priv->pci_dev);
3607 iwl_uninit_drv(priv);
3609 iwl_eeprom_free(priv);
3611 pci_iounmap(pdev, priv->hw_base);
3612 out_pci_release_regions:
3613 pci_set_drvdata(pdev, NULL);
3614 pci_release_regions(pdev);
3615 out_pci_disable_device:
3616 pci_disable_device(pdev);
3617 out_ieee80211_free_hw:
3618 iwl_free_traffic_mem(priv);
3619 ieee80211_free_hw(priv->hw);
3624 static void __devexit iwl_pci_remove(struct pci_dev *pdev)
3626 struct iwl_priv *priv = pci_get_drvdata(pdev);
3627 unsigned long flags;
3632 wait_for_completion(&priv->_agn.firmware_loading_complete);
3634 IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
3636 iwl_dbgfs_unregister(priv);
3637 sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
3639 /* ieee80211_unregister_hw call wil cause iwl_mac_stop to
3640 * to be called and iwl_down since we are removing the device
3641 * we need to set STATUS_EXIT_PENDING bit.
3643 set_bit(STATUS_EXIT_PENDING, &priv->status);
3644 if (priv->mac80211_registered) {
3645 ieee80211_unregister_hw(priv->hw);
3646 priv->mac80211_registered = 0;
3652 * Make sure device is reset to low power before unloading driver.
3653 * This may be redundant with iwl_down(), but there are paths to
3654 * run iwl_down() without calling apm_ops.stop(), and there are
3655 * paths to avoid running iwl_down() at all before leaving driver.
3656 * This (inexpensive) call *makes sure* device is reset.
3658 priv->cfg->ops->lib->apm_ops.stop(priv);
3662 /* make sure we flush any pending irq or
3663 * tasklet for the driver
3665 spin_lock_irqsave(&priv->lock, flags);
3666 iwl_disable_interrupts(priv);
3667 spin_unlock_irqrestore(&priv->lock, flags);
3669 iwl_synchronize_irq(priv);
3671 iwl_dealloc_ucode_pci(priv);
3674 iwlagn_rx_queue_free(priv, &priv->rxq);
3675 iwlagn_hw_txq_ctx_free(priv);
3677 iwl_eeprom_free(priv);
3680 /*netif_stop_queue(dev); */
3681 flush_workqueue(priv->workqueue);
3683 /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
3684 * priv->workqueue... so we can't take down the workqueue
3686 destroy_workqueue(priv->workqueue);
3687 priv->workqueue = NULL;
3688 iwl_free_traffic_mem(priv);
3690 free_irq(priv->pci_dev->irq, priv);
3691 pci_disable_msi(priv->pci_dev);
3692 pci_iounmap(pdev, priv->hw_base);
3693 pci_release_regions(pdev);
3694 pci_disable_device(pdev);
3695 pci_set_drvdata(pdev, NULL);
3697 iwl_uninit_drv(priv);
3699 iwl_free_isr_ict(priv);
3701 if (priv->ibss_beacon)
3702 dev_kfree_skb(priv->ibss_beacon);
3704 ieee80211_free_hw(priv->hw);
3708 /*****************************************************************************
3710 * driver and module entry point
3712 *****************************************************************************/
3714 /* Hardware specific file defines the PCI IDs table for that hardware module */
3715 static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
3716 #ifdef CONFIG_IWL4965
3717 {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)},
3718 {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
3719 #endif /* CONFIG_IWL4965 */
3720 #ifdef CONFIG_IWL5000
3721 /* 5100 Series WiFi */
3722 {IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */
3723 {IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */
3724 {IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */
3725 {IWL_PCI_DEVICE(0x4232, 0x1304, iwl5100_agn_cfg)}, /* Half Mini Card */
3726 {IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bgn_cfg)}, /* Mini Card */
3727 {IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bgn_cfg)}, /* Half Mini Card */
3728 {IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)}, /* Mini Card */
3729 {IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)}, /* Half Mini Card */
3730 {IWL_PCI_DEVICE(0x4232, 0x1221, iwl5100_agn_cfg)}, /* Mini Card */
3731 {IWL_PCI_DEVICE(0x4232, 0x1321, iwl5100_agn_cfg)}, /* Half Mini Card */
3732 {IWL_PCI_DEVICE(0x4232, 0x1224, iwl5100_agn_cfg)}, /* Mini Card */
3733 {IWL_PCI_DEVICE(0x4232, 0x1324, iwl5100_agn_cfg)}, /* Half Mini Card */
3734 {IWL_PCI_DEVICE(0x4232, 0x1225, iwl5100_bgn_cfg)}, /* Mini Card */
3735 {IWL_PCI_DEVICE(0x4232, 0x1325, iwl5100_bgn_cfg)}, /* Half Mini Card */
3736 {IWL_PCI_DEVICE(0x4232, 0x1226, iwl5100_abg_cfg)}, /* Mini Card */
3737 {IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)}, /* Half Mini Card */
3738 {IWL_PCI_DEVICE(0x4237, 0x1211, iwl5100_agn_cfg)}, /* Mini Card */
3739 {IWL_PCI_DEVICE(0x4237, 0x1311, iwl5100_agn_cfg)}, /* Half Mini Card */
3740 {IWL_PCI_DEVICE(0x4237, 0x1214, iwl5100_agn_cfg)}, /* Mini Card */
3741 {IWL_PCI_DEVICE(0x4237, 0x1314, iwl5100_agn_cfg)}, /* Half Mini Card */
3742 {IWL_PCI_DEVICE(0x4237, 0x1215, iwl5100_bgn_cfg)}, /* Mini Card */
3743 {IWL_PCI_DEVICE(0x4237, 0x1315, iwl5100_bgn_cfg)}, /* Half Mini Card */
3744 {IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)}, /* Mini Card */
3745 {IWL_PCI_DEVICE(0x4237, 0x1316, iwl5100_abg_cfg)}, /* Half Mini Card */
3747 /* 5300 Series WiFi */
3748 {IWL_PCI_DEVICE(0x4235, 0x1021, iwl5300_agn_cfg)}, /* Mini Card */
3749 {IWL_PCI_DEVICE(0x4235, 0x1121, iwl5300_agn_cfg)}, /* Half Mini Card */
3750 {IWL_PCI_DEVICE(0x4235, 0x1024, iwl5300_agn_cfg)}, /* Mini Card */
3751 {IWL_PCI_DEVICE(0x4235, 0x1124, iwl5300_agn_cfg)}, /* Half Mini Card */
3752 {IWL_PCI_DEVICE(0x4235, 0x1001, iwl5300_agn_cfg)}, /* Mini Card */
3753 {IWL_PCI_DEVICE(0x4235, 0x1101, iwl5300_agn_cfg)}, /* Half Mini Card */
3754 {IWL_PCI_DEVICE(0x4235, 0x1004, iwl5300_agn_cfg)}, /* Mini Card */
3755 {IWL_PCI_DEVICE(0x4235, 0x1104, iwl5300_agn_cfg)}, /* Half Mini Card */
3756 {IWL_PCI_DEVICE(0x4236, 0x1011, iwl5300_agn_cfg)}, /* Mini Card */
3757 {IWL_PCI_DEVICE(0x4236, 0x1111, iwl5300_agn_cfg)}, /* Half Mini Card */
3758 {IWL_PCI_DEVICE(0x4236, 0x1014, iwl5300_agn_cfg)}, /* Mini Card */
3759 {IWL_PCI_DEVICE(0x4236, 0x1114, iwl5300_agn_cfg)}, /* Half Mini Card */
3761 /* 5350 Series WiFi/WiMax */
3762 {IWL_PCI_DEVICE(0x423A, 0x1001, iwl5350_agn_cfg)}, /* Mini Card */
3763 {IWL_PCI_DEVICE(0x423A, 0x1021, iwl5350_agn_cfg)}, /* Mini Card */
3764 {IWL_PCI_DEVICE(0x423B, 0x1011, iwl5350_agn_cfg)}, /* Mini Card */
3766 /* 5150 Series Wifi/WiMax */
3767 {IWL_PCI_DEVICE(0x423C, 0x1201, iwl5150_agn_cfg)}, /* Mini Card */
3768 {IWL_PCI_DEVICE(0x423C, 0x1301, iwl5150_agn_cfg)}, /* Half Mini Card */
3769 {IWL_PCI_DEVICE(0x423C, 0x1206, iwl5150_abg_cfg)}, /* Mini Card */
3770 {IWL_PCI_DEVICE(0x423C, 0x1306, iwl5150_abg_cfg)}, /* Half Mini Card */
3771 {IWL_PCI_DEVICE(0x423C, 0x1221, iwl5150_agn_cfg)}, /* Mini Card */
3772 {IWL_PCI_DEVICE(0x423C, 0x1321, iwl5150_agn_cfg)}, /* Half Mini Card */
3774 {IWL_PCI_DEVICE(0x423D, 0x1211, iwl5150_agn_cfg)}, /* Mini Card */
3775 {IWL_PCI_DEVICE(0x423D, 0x1311, iwl5150_agn_cfg)}, /* Half Mini Card */
3776 {IWL_PCI_DEVICE(0x423D, 0x1216, iwl5150_abg_cfg)}, /* Mini Card */
3777 {IWL_PCI_DEVICE(0x423D, 0x1316, iwl5150_abg_cfg)}, /* Half Mini Card */
3780 {IWL_PCI_DEVICE(0x422B, 0x1101, iwl6000_3agn_cfg)},
3781 {IWL_PCI_DEVICE(0x422B, 0x1121, iwl6000_3agn_cfg)},
3782 {IWL_PCI_DEVICE(0x422C, 0x1301, iwl6000i_2agn_cfg)},
3783 {IWL_PCI_DEVICE(0x422C, 0x1306, iwl6000i_2abg_cfg)},
3784 {IWL_PCI_DEVICE(0x422C, 0x1307, iwl6000i_2bg_cfg)},
3785 {IWL_PCI_DEVICE(0x422C, 0x1321, iwl6000i_2agn_cfg)},
3786 {IWL_PCI_DEVICE(0x422C, 0x1326, iwl6000i_2abg_cfg)},
3787 {IWL_PCI_DEVICE(0x4238, 0x1111, iwl6000_3agn_cfg)},
3788 {IWL_PCI_DEVICE(0x4239, 0x1311, iwl6000i_2agn_cfg)},
3789 {IWL_PCI_DEVICE(0x4239, 0x1316, iwl6000i_2abg_cfg)},
3791 /* 6x00 Series Gen2a */
3792 {IWL_PCI_DEVICE(0x0082, 0x1201, iwl6000g2a_2agn_cfg)},
3793 {IWL_PCI_DEVICE(0x0085, 0x1211, iwl6000g2a_2agn_cfg)},
3794 {IWL_PCI_DEVICE(0x0082, 0x1221, iwl6000g2a_2agn_cfg)},
3796 /* 6x50 WiFi/WiMax Series */
3797 {IWL_PCI_DEVICE(0x0087, 0x1301, iwl6050_2agn_cfg)},
3798 {IWL_PCI_DEVICE(0x0087, 0x1306, iwl6050_2abg_cfg)},
3799 {IWL_PCI_DEVICE(0x0087, 0x1321, iwl6050_2agn_cfg)},
3800 {IWL_PCI_DEVICE(0x0087, 0x1326, iwl6050_2abg_cfg)},
3801 {IWL_PCI_DEVICE(0x0089, 0x1311, iwl6050_2agn_cfg)},
3802 {IWL_PCI_DEVICE(0x0089, 0x1316, iwl6050_2abg_cfg)},
3804 /* 1000 Series WiFi */
3805 {IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},
3806 {IWL_PCI_DEVICE(0x0083, 0x1305, iwl1000_bgn_cfg)},
3807 {IWL_PCI_DEVICE(0x0083, 0x1225, iwl1000_bgn_cfg)},
3808 {IWL_PCI_DEVICE(0x0083, 0x1325, iwl1000_bgn_cfg)},
3809 {IWL_PCI_DEVICE(0x0084, 0x1215, iwl1000_bgn_cfg)},
3810 {IWL_PCI_DEVICE(0x0084, 0x1315, iwl1000_bgn_cfg)},
3811 {IWL_PCI_DEVICE(0x0083, 0x1206, iwl1000_bg_cfg)},
3812 {IWL_PCI_DEVICE(0x0083, 0x1306, iwl1000_bg_cfg)},
3813 {IWL_PCI_DEVICE(0x0083, 0x1226, iwl1000_bg_cfg)},
3814 {IWL_PCI_DEVICE(0x0083, 0x1326, iwl1000_bg_cfg)},
3815 {IWL_PCI_DEVICE(0x0084, 0x1216, iwl1000_bg_cfg)},
3816 {IWL_PCI_DEVICE(0x0084, 0x1316, iwl1000_bg_cfg)},
3817 #endif /* CONFIG_IWL5000 */
3821 MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);
3823 static struct pci_driver iwl_driver = {
3825 .id_table = iwl_hw_card_ids,
3826 .probe = iwl_pci_probe,
3827 .remove = __devexit_p(iwl_pci_remove),
3829 .suspend = iwl_pci_suspend,
3830 .resume = iwl_pci_resume,
3834 static int __init iwl_init(void)
3838 printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
3839 printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
3841 ret = iwlagn_rate_control_register();
3843 printk(KERN_ERR DRV_NAME
3844 "Unable to register rate control algorithm: %d\n", ret);
3848 ret = pci_register_driver(&iwl_driver);
3850 printk(KERN_ERR DRV_NAME "Unable to initialize PCI module\n");
3851 goto error_register;
3857 iwlagn_rate_control_unregister();
3861 static void __exit iwl_exit(void)
3863 pci_unregister_driver(&iwl_driver);
3864 iwlagn_rate_control_unregister();
3867 module_exit(iwl_exit);
3868 module_init(iwl_init);
3870 #ifdef CONFIG_IWLWIFI_DEBUG
3871 module_param_named(debug50, iwl_debug_level, uint, S_IRUGO);
3872 MODULE_PARM_DESC(debug50, "50XX debug output mask (deprecated)");
3873 module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
3874 MODULE_PARM_DESC(debug, "debug output mask");
3877 module_param_named(swcrypto50, iwlagn_mod_params.sw_crypto, bool, S_IRUGO);
3878 MODULE_PARM_DESC(swcrypto50,
3879 "using crypto in software (default 0 [hardware]) (deprecated)");
3880 module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO);
3881 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
3882 module_param_named(queues_num50,
3883 iwlagn_mod_params.num_of_queues, int, S_IRUGO);
3884 MODULE_PARM_DESC(queues_num50,
3885 "number of hw queues in 50xx series (deprecated)");
3886 module_param_named(queues_num, iwlagn_mod_params.num_of_queues, int, S_IRUGO);
3887 MODULE_PARM_DESC(queues_num, "number of hw queues.");
3888 module_param_named(11n_disable50, iwlagn_mod_params.disable_11n, int, S_IRUGO);
3889 MODULE_PARM_DESC(11n_disable50, "disable 50XX 11n functionality (deprecated)");
3890 module_param_named(11n_disable, iwlagn_mod_params.disable_11n, int, S_IRUGO);
3891 MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
3892 module_param_named(amsdu_size_8K50, iwlagn_mod_params.amsdu_size_8K,
3894 MODULE_PARM_DESC(amsdu_size_8K50,
3895 "enable 8K amsdu size in 50XX series (deprecated)");
3896 module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K,
3898 MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
3899 module_param_named(fw_restart50, iwlagn_mod_params.restart_fw, int, S_IRUGO);
3900 MODULE_PARM_DESC(fw_restart50,
3901 "restart firmware in case of error (deprecated)");
3902 module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO);
3903 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
3905 disable_hw_scan, iwlagn_mod_params.disable_hw_scan, int, S_IRUGO);
3906 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");