1 /******************************************************************************
3 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5 * Portions of this file are derived from the ipw3945 project, as well
6 * as portions of the ieee80211 subsystem header files.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of version 2 of the GNU General Public License as
10 * published by the Free Software Foundation.
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * You should have received a copy of the GNU General Public License along with
18 * this program; if not, write to the Free Software Foundation, Inc.,
19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
21 * The full GNU General Public License is included in this distribution in the
22 * file called LICENSE.
24 * Contact Information:
25 * Intel Linux Wireless <ilw@linux.intel.com>
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
28 *****************************************************************************/
30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
32 #include <linux/kernel.h>
33 #include <linux/module.h>
34 #include <linux/init.h>
35 #include <linux/slab.h>
36 #include <linux/dma-mapping.h>
37 #include <linux/delay.h>
38 #include <linux/sched.h>
39 #include <linux/skbuff.h>
40 #include <linux/netdevice.h>
41 #include <linux/wireless.h>
42 #include <linux/firmware.h>
43 #include <linux/etherdevice.h>
44 #include <linux/if_arp.h>
46 #include <net/mac80211.h>
48 #include <asm/div64.h>
50 #include "iwl-eeprom.h"
54 #include "iwl-helpers.h"
56 #include "iwl-agn-calib.h"
59 #include "iwl-trans.h"
61 /******************************************************************************
65 ******************************************************************************/
68 * module name, copyright, version, etc.
70 #define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
72 #ifdef CONFIG_IWLWIFI_DEBUG
78 #define DRV_VERSION IWLWIFI_VERSION VD
81 MODULE_DESCRIPTION(DRV_DESCRIPTION);
82 MODULE_VERSION(DRV_VERSION);
83 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
84 MODULE_LICENSE("GPL");
86 static int iwlagn_ant_coupling;
87 static bool iwlagn_bt_ch_announce = 1;
89 void iwl_update_chain_flags(struct iwl_priv *priv)
91 struct iwl_rxon_context *ctx;
93 for_each_context(priv, ctx) {
94 iwlagn_set_rxon_chain(priv, ctx);
95 if (ctx->active.rx_chain != ctx->staging.rx_chain)
96 iwlagn_commit_rxon(priv, ctx);
100 /* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
101 static void iwl_set_beacon_tim(struct iwl_priv *priv,
102 struct iwl_tx_beacon_cmd *tx_beacon_cmd,
103 u8 *beacon, u32 frame_size)
106 struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
109 * The index is relative to frame start but we start looking at the
110 * variable-length part of the beacon.
112 tim_idx = mgmt->u.beacon.variable - beacon;
114 /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
115 while ((tim_idx < (frame_size - 2)) &&
116 (beacon[tim_idx] != WLAN_EID_TIM))
117 tim_idx += beacon[tim_idx+1] + 2;
119 /* If TIM field was found, set variables */
120 if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
121 tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
122 tx_beacon_cmd->tim_size = beacon[tim_idx+1];
124 IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
127 int iwlagn_send_beacon_cmd(struct iwl_priv *priv)
129 struct iwl_tx_beacon_cmd *tx_beacon_cmd;
130 struct iwl_host_cmd cmd = {
131 .id = REPLY_TX_BEACON,
134 struct ieee80211_tx_info *info;
140 * We have to set up the TX command, the TX Beacon command, and the
144 lockdep_assert_held(&priv->mutex);
146 if (!priv->beacon_ctx) {
147 IWL_ERR(priv, "trying to build beacon w/o beacon context!\n");
151 if (WARN_ON(!priv->beacon_skb))
154 /* Allocate beacon command */
155 if (!priv->beacon_cmd)
156 priv->beacon_cmd = kzalloc(sizeof(*tx_beacon_cmd), GFP_KERNEL);
157 tx_beacon_cmd = priv->beacon_cmd;
161 frame_size = priv->beacon_skb->len;
163 /* Set up TX command fields */
164 tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
165 tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id;
166 tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
167 tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
168 TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
170 /* Set up TX beacon command fields */
171 iwl_set_beacon_tim(priv, tx_beacon_cmd, priv->beacon_skb->data,
174 /* Set up packet rate and flags */
175 info = IEEE80211_SKB_CB(priv->beacon_skb);
178 * Let's set up the rate at least somewhat correctly;
179 * it will currently not actually be used by the uCode,
180 * it uses the broadcast station's rate instead.
182 if (info->control.rates[0].idx < 0 ||
183 info->control.rates[0].flags & IEEE80211_TX_RC_MCS)
186 rate = info->control.rates[0].idx;
188 priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
189 priv->hw_params.valid_tx_ant);
190 rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
192 /* In mac80211, rates for 5 GHz start at 0 */
193 if (info->band == IEEE80211_BAND_5GHZ)
194 rate += IWL_FIRST_OFDM_RATE;
195 else if (rate >= IWL_FIRST_CCK_RATE && rate <= IWL_LAST_CCK_RATE)
196 rate_flags |= RATE_MCS_CCK_MSK;
198 tx_beacon_cmd->tx.rate_n_flags =
199 iwl_hw_set_rate_n_flags(rate, rate_flags);
202 cmd.len[0] = sizeof(*tx_beacon_cmd);
203 cmd.data[0] = tx_beacon_cmd;
204 cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
205 cmd.len[1] = frame_size;
206 cmd.data[1] = priv->beacon_skb->data;
207 cmd.dataflags[1] = IWL_HCMD_DFL_NOCOPY;
209 return trans_send_cmd(priv, &cmd);
212 static void iwl_bg_beacon_update(struct work_struct *work)
214 struct iwl_priv *priv =
215 container_of(work, struct iwl_priv, beacon_update);
216 struct sk_buff *beacon;
218 mutex_lock(&priv->mutex);
219 if (!priv->beacon_ctx) {
220 IWL_ERR(priv, "updating beacon w/o beacon context!\n");
224 if (priv->beacon_ctx->vif->type != NL80211_IFTYPE_AP) {
226 * The ucode will send beacon notifications even in
227 * IBSS mode, but we don't want to process them. But
228 * we need to defer the type check to here due to
229 * requiring locking around the beacon_ctx access.
234 /* Pull updated AP beacon from mac80211. will fail if not in AP mode */
235 beacon = ieee80211_beacon_get(priv->hw, priv->beacon_ctx->vif);
237 IWL_ERR(priv, "update beacon failed -- keeping old\n");
241 /* new beacon skb is allocated every time; dispose previous.*/
242 dev_kfree_skb(priv->beacon_skb);
244 priv->beacon_skb = beacon;
246 iwlagn_send_beacon_cmd(priv);
248 mutex_unlock(&priv->mutex);
251 static void iwl_bg_bt_runtime_config(struct work_struct *work)
253 struct iwl_priv *priv =
254 container_of(work, struct iwl_priv, bt_runtime_config);
256 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
259 /* dont send host command if rf-kill is on */
260 if (!iwl_is_ready_rf(priv))
262 iwlagn_send_advance_bt_config(priv);
265 static void iwl_bg_bt_full_concurrency(struct work_struct *work)
267 struct iwl_priv *priv =
268 container_of(work, struct iwl_priv, bt_full_concurrency);
269 struct iwl_rxon_context *ctx;
271 mutex_lock(&priv->mutex);
273 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
276 /* dont send host command if rf-kill is on */
277 if (!iwl_is_ready_rf(priv))
280 IWL_DEBUG_INFO(priv, "BT coex in %s mode\n",
281 priv->bt_full_concurrent ?
282 "full concurrency" : "3-wire");
285 * LQ & RXON updated cmds must be sent before BT Config cmd
286 * to avoid 3-wire collisions
288 for_each_context(priv, ctx) {
289 iwlagn_set_rxon_chain(priv, ctx);
290 iwlagn_commit_rxon(priv, ctx);
293 iwlagn_send_advance_bt_config(priv);
295 mutex_unlock(&priv->mutex);
299 * iwl_bg_statistics_periodic - Timer callback to queue statistics
301 * This callback is provided in order to send a statistics request.
303 * This timer function is continually reset to execute within
304 * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
305 * was received. We need to ensure we receive the statistics in order
306 * to update the temperature used for calibrating the TXPOWER.
308 static void iwl_bg_statistics_periodic(unsigned long data)
310 struct iwl_priv *priv = (struct iwl_priv *)data;
312 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
315 /* dont send host command if rf-kill is on */
316 if (!iwl_is_ready_rf(priv))
319 iwl_send_statistics_request(priv, CMD_ASYNC, false);
323 static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
324 u32 start_idx, u32 num_events,
328 u32 ptr; /* SRAM byte address of log data */
329 u32 ev, time, data; /* event log data */
330 unsigned long reg_flags;
333 ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32));
335 ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32));
337 /* Make sure device is powered up for SRAM reads */
338 spin_lock_irqsave(&priv->reg_lock, reg_flags);
339 if (iwl_grab_nic_access(priv)) {
340 spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
344 /* Set starting address; reads will auto-increment */
345 iwl_write32(priv, HBUS_TARG_MEM_RADDR, ptr);
349 * "time" is actually "data" for mode 0 (no timestamp).
350 * place event id # at far right for easier visual parsing.
352 for (i = 0; i < num_events; i++) {
353 ev = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
354 time = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
356 trace_iwlwifi_dev_ucode_cont_event(priv,
359 data = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
360 trace_iwlwifi_dev_ucode_cont_event(priv,
364 /* Allow device to power down */
365 iwl_release_nic_access(priv);
366 spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
369 static void iwl_continuous_event_trace(struct iwl_priv *priv)
371 u32 capacity; /* event log capacity in # entries */
372 u32 base; /* SRAM byte address of event log header */
373 u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
374 u32 num_wraps; /* # times uCode wrapped to top of log */
375 u32 next_entry; /* index of next entry to be written by uCode */
377 base = priv->device_pointers.error_event_table;
378 if (priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
379 capacity = iwl_read_targ_mem(priv, base);
380 num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
381 mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
382 next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
386 if (num_wraps == priv->event_log.num_wraps) {
387 iwl_print_cont_event_trace(priv,
388 base, priv->event_log.next_entry,
389 next_entry - priv->event_log.next_entry,
391 priv->event_log.non_wraps_count++;
393 if ((num_wraps - priv->event_log.num_wraps) > 1)
394 priv->event_log.wraps_more_count++;
396 priv->event_log.wraps_once_count++;
397 trace_iwlwifi_dev_ucode_wrap_event(priv,
398 num_wraps - priv->event_log.num_wraps,
399 next_entry, priv->event_log.next_entry);
400 if (next_entry < priv->event_log.next_entry) {
401 iwl_print_cont_event_trace(priv, base,
402 priv->event_log.next_entry,
403 capacity - priv->event_log.next_entry,
406 iwl_print_cont_event_trace(priv, base, 0,
409 iwl_print_cont_event_trace(priv, base,
410 next_entry, capacity - next_entry,
413 iwl_print_cont_event_trace(priv, base, 0,
417 priv->event_log.num_wraps = num_wraps;
418 priv->event_log.next_entry = next_entry;
422 * iwl_bg_ucode_trace - Timer callback to log ucode event
424 * The timer is continually set to execute every
425 * UCODE_TRACE_PERIOD milliseconds after the last timer expired
426 * this function is to perform continuous uCode event logging operation
429 static void iwl_bg_ucode_trace(unsigned long data)
431 struct iwl_priv *priv = (struct iwl_priv *)data;
433 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
436 if (priv->event_log.ucode_trace) {
437 iwl_continuous_event_trace(priv);
438 /* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
439 mod_timer(&priv->ucode_trace,
440 jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
444 static void iwl_bg_tx_flush(struct work_struct *work)
446 struct iwl_priv *priv =
447 container_of(work, struct iwl_priv, tx_flush);
449 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
452 /* do nothing if rf-kill is on */
453 if (!iwl_is_ready_rf(priv))
456 IWL_DEBUG_INFO(priv, "device request: flush all tx frames\n");
457 iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL);
461 * iwl_rx_handle - Main entry function for receiving responses from uCode
463 * Uses the priv->rx_handlers callback function array to invoke
464 * the appropriate handlers, including command responses,
465 * frame-received notifications, and other notifications.
467 static void iwl_rx_handle(struct iwl_priv *priv)
469 struct iwl_rx_mem_buffer *rxb;
470 struct iwl_rx_packet *pkt;
471 struct iwl_rx_queue *rxq = &priv->rxq;
479 /* uCode's read index (stored in shared DRAM) indicates the last Rx
480 * buffer that the driver may process (last buffer filled by ucode). */
481 r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
484 /* Rx interrupt, but nothing sent from uCode */
486 IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
488 /* calculate total frames need to be restock after handling RX */
489 total_empty = r - rxq->write_actual;
491 total_empty += RX_QUEUE_SIZE;
493 if (total_empty > (RX_QUEUE_SIZE / 2))
501 /* If an RXB doesn't have a Rx queue slot associated with it,
502 * then a bug has been introduced in the queue refilling
503 * routines -- catch it here */
504 if (WARN_ON(rxb == NULL)) {
505 i = (i + 1) & RX_QUEUE_MASK;
509 rxq->queue[i] = NULL;
511 dma_unmap_page(priv->bus.dev, rxb->page_dma,
512 PAGE_SIZE << priv->hw_params.rx_page_order,
516 len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
517 len += sizeof(u32); /* account for status word */
518 trace_iwlwifi_dev_rx(priv, pkt, len);
520 /* Reclaim a command buffer only if this packet is a response
521 * to a (driver-originated) command.
522 * If the packet (e.g. Rx frame) originated from uCode,
523 * there is no command buffer to reclaim.
524 * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
525 * but apparently a few don't get set; catch them here. */
526 reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
527 (pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
528 (pkt->hdr.cmd != REPLY_RX) &&
529 (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) &&
530 (pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
531 (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
532 (pkt->hdr.cmd != REPLY_TX);
535 * Do the notification wait before RX handlers so
536 * even if the RX handler consumes the RXB we have
537 * access to it in the notification wait entry.
539 if (!list_empty(&priv->_agn.notif_waits)) {
540 struct iwl_notification_wait *w;
542 spin_lock(&priv->_agn.notif_wait_lock);
543 list_for_each_entry(w, &priv->_agn.notif_waits, list) {
544 if (w->cmd == pkt->hdr.cmd) {
547 w->fn(priv, pkt, w->fn_data);
550 spin_unlock(&priv->_agn.notif_wait_lock);
552 wake_up_all(&priv->_agn.notif_waitq);
554 if (priv->pre_rx_handler)
555 priv->pre_rx_handler(priv, rxb);
557 /* Based on type of command response or notification,
558 * handle those that need handling via function in
559 * rx_handlers table. See iwl_setup_rx_handlers() */
560 if (priv->rx_handlers[pkt->hdr.cmd]) {
561 IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r,
562 i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
563 priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
564 priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
566 /* No handling needed */
568 "r %d i %d No handler needed for %s, 0x%02x\n",
569 r, i, get_cmd_string(pkt->hdr.cmd),
574 * XXX: After here, we should always check rxb->page
575 * against NULL before touching it or its virtual
576 * memory (pkt). Because some rx_handler might have
577 * already taken or freed the pages.
581 /* Invoke any callbacks, transfer the buffer to caller,
582 * and fire off the (possibly) blocking
584 * as we reclaim the driver command queue */
586 iwl_tx_cmd_complete(priv, rxb);
588 IWL_WARN(priv, "Claim null rxb?\n");
591 /* Reuse the page if possible. For notification packets and
592 * SKBs that fail to Rx correctly, add them back into the
593 * rx_free list for reuse later. */
594 spin_lock_irqsave(&rxq->lock, flags);
595 if (rxb->page != NULL) {
596 rxb->page_dma = dma_map_page(priv->bus.dev, rxb->page,
597 0, PAGE_SIZE << priv->hw_params.rx_page_order,
599 list_add_tail(&rxb->list, &rxq->rx_free);
602 list_add_tail(&rxb->list, &rxq->rx_used);
604 spin_unlock_irqrestore(&rxq->lock, flags);
606 i = (i + 1) & RX_QUEUE_MASK;
607 /* If there are a lot of unused frames,
608 * restock the Rx queue so ucode wont assert. */
613 iwlagn_rx_replenish_now(priv);
619 /* Backtrack one entry */
622 iwlagn_rx_replenish_now(priv);
624 iwlagn_rx_queue_restock(priv);
627 /* tasklet for iwlagn interrupt */
628 static void iwl_irq_tasklet(struct iwl_priv *priv)
634 #ifdef CONFIG_IWLWIFI_DEBUG
638 spin_lock_irqsave(&priv->lock, flags);
640 /* Ack/clear/reset pending uCode interrupts.
641 * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
643 /* There is a hardware bug in the interrupt mask function that some
644 * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
645 * they are disabled in the CSR_INT_MASK register. Furthermore the
646 * ICT interrupt handling mechanism has another bug that might cause
647 * these unmasked interrupts fail to be detected. We workaround the
648 * hardware bugs here by ACKing all the possible interrupts so that
649 * interrupt coalescing can still be achieved.
651 iwl_write32(priv, CSR_INT, priv->_agn.inta | ~priv->inta_mask);
653 inta = priv->_agn.inta;
655 #ifdef CONFIG_IWLWIFI_DEBUG
656 if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
658 inta_mask = iwl_read32(priv, CSR_INT_MASK);
659 IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ",
664 spin_unlock_irqrestore(&priv->lock, flags);
666 /* saved interrupt in inta variable now we can reset priv->_agn.inta */
669 /* Now service all interrupt bits discovered above. */
670 if (inta & CSR_INT_BIT_HW_ERR) {
671 IWL_ERR(priv, "Hardware error detected. Restarting.\n");
673 /* Tell the device to stop sending interrupts */
674 iwl_disable_interrupts(priv);
676 priv->isr_stats.hw++;
677 iwl_irq_handle_error(priv);
679 handled |= CSR_INT_BIT_HW_ERR;
684 #ifdef CONFIG_IWLWIFI_DEBUG
685 if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
686 /* NIC fires this, but we don't use it, redundant with WAKEUP */
687 if (inta & CSR_INT_BIT_SCD) {
688 IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
689 "the frame/frames.\n");
690 priv->isr_stats.sch++;
693 /* Alive notification via Rx interrupt will do the real work */
694 if (inta & CSR_INT_BIT_ALIVE) {
695 IWL_DEBUG_ISR(priv, "Alive interrupt\n");
696 priv->isr_stats.alive++;
700 /* Safely ignore these bits for debug checks below */
701 inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
703 /* HW RF KILL switch toggled */
704 if (inta & CSR_INT_BIT_RF_KILL) {
706 if (!(iwl_read32(priv, CSR_GP_CNTRL) &
707 CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
710 IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
711 hw_rf_kill ? "disable radio" : "enable radio");
713 priv->isr_stats.rfkill++;
715 /* driver only loads ucode once setting the interface up.
716 * the driver allows loading the ucode even if the radio
717 * is killed. Hence update the killswitch state here. The
718 * rfkill handler will care about restarting if needed.
720 if (!test_bit(STATUS_ALIVE, &priv->status)) {
722 set_bit(STATUS_RF_KILL_HW, &priv->status);
724 clear_bit(STATUS_RF_KILL_HW, &priv->status);
725 wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
728 handled |= CSR_INT_BIT_RF_KILL;
731 /* Chip got too hot and stopped itself */
732 if (inta & CSR_INT_BIT_CT_KILL) {
733 IWL_ERR(priv, "Microcode CT kill error detected.\n");
734 priv->isr_stats.ctkill++;
735 handled |= CSR_INT_BIT_CT_KILL;
738 /* Error detected by uCode */
739 if (inta & CSR_INT_BIT_SW_ERR) {
740 IWL_ERR(priv, "Microcode SW error detected. "
741 " Restarting 0x%X.\n", inta);
742 priv->isr_stats.sw++;
743 iwl_irq_handle_error(priv);
744 handled |= CSR_INT_BIT_SW_ERR;
747 /* uCode wakes up after power-down sleep */
748 if (inta & CSR_INT_BIT_WAKEUP) {
749 IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
750 iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
751 for (i = 0; i < priv->hw_params.max_txq_num; i++)
752 iwl_txq_update_write_ptr(priv, &priv->txq[i]);
754 priv->isr_stats.wakeup++;
756 handled |= CSR_INT_BIT_WAKEUP;
759 /* All uCode command responses, including Tx command responses,
760 * Rx "responses" (frame-received notification), and other
761 * notifications from uCode come through here*/
762 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
763 CSR_INT_BIT_RX_PERIODIC)) {
764 IWL_DEBUG_ISR(priv, "Rx interrupt\n");
765 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
766 handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
767 iwl_write32(priv, CSR_FH_INT_STATUS,
770 if (inta & CSR_INT_BIT_RX_PERIODIC) {
771 handled |= CSR_INT_BIT_RX_PERIODIC;
772 iwl_write32(priv, CSR_INT, CSR_INT_BIT_RX_PERIODIC);
774 /* Sending RX interrupt require many steps to be done in the
776 * 1- write interrupt to current index in ICT table.
778 * 3- update RX shared data to indicate last write index.
780 * This could lead to RX race, driver could receive RX interrupt
781 * but the shared data changes does not reflect this;
782 * periodic interrupt will detect any dangling Rx activity.
785 /* Disable periodic interrupt; we use it as just a one-shot. */
786 iwl_write8(priv, CSR_INT_PERIODIC_REG,
787 CSR_INT_PERIODIC_DIS);
791 * Enable periodic interrupt in 8 msec only if we received
792 * real RX interrupt (instead of just periodic int), to catch
793 * any dangling Rx interrupt. If it was just the periodic
794 * interrupt, there was no dangling Rx activity, and no need
795 * to extend the periodic interrupt; one-shot is enough.
797 if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
798 iwl_write8(priv, CSR_INT_PERIODIC_REG,
799 CSR_INT_PERIODIC_ENA);
801 priv->isr_stats.rx++;
804 /* This "Tx" DMA channel is used only for loading uCode */
805 if (inta & CSR_INT_BIT_FH_TX) {
806 iwl_write32(priv, CSR_FH_INT_STATUS, CSR_FH_INT_TX_MASK);
807 IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
808 priv->isr_stats.tx++;
809 handled |= CSR_INT_BIT_FH_TX;
810 /* Wake up uCode load routine, now that load is complete */
811 priv->ucode_write_complete = 1;
812 wake_up_interruptible(&priv->wait_command_queue);
815 if (inta & ~handled) {
816 IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
817 priv->isr_stats.unhandled++;
820 if (inta & ~(priv->inta_mask)) {
821 IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
822 inta & ~priv->inta_mask);
825 /* Re-enable all interrupts */
826 /* only Re-enable if disabled by irq */
827 if (test_bit(STATUS_INT_ENABLED, &priv->status))
828 iwl_enable_interrupts(priv);
829 /* Re-enable RF_KILL if it occurred */
830 else if (handled & CSR_INT_BIT_RF_KILL)
831 iwl_enable_rfkill_int(priv);
834 /*****************************************************************************
838 *****************************************************************************/
840 #ifdef CONFIG_IWLWIFI_DEBUG
843 * The following adds a new attribute to the sysfs representation
844 * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
845 * used for controlling the debug level.
847 * See the level definitions in iwl for details.
849 * The debug_level being managed using sysfs below is a per device debug
850 * level that is used instead of the global debug level if it (the per
851 * device debug level) is set.
853 static ssize_t show_debug_level(struct device *d,
854 struct device_attribute *attr, char *buf)
856 struct iwl_priv *priv = dev_get_drvdata(d);
857 return sprintf(buf, "0x%08X\n", iwl_get_debug_level(priv));
859 static ssize_t store_debug_level(struct device *d,
860 struct device_attribute *attr,
861 const char *buf, size_t count)
863 struct iwl_priv *priv = dev_get_drvdata(d);
867 ret = strict_strtoul(buf, 0, &val);
869 IWL_ERR(priv, "%s is not in hex or decimal form.\n", buf);
871 priv->debug_level = val;
872 if (iwl_alloc_traffic_mem(priv))
874 "Not enough memory to generate traffic log\n");
876 return strnlen(buf, count);
879 static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
880 show_debug_level, store_debug_level);
883 #endif /* CONFIG_IWLWIFI_DEBUG */
886 static ssize_t show_temperature(struct device *d,
887 struct device_attribute *attr, char *buf)
889 struct iwl_priv *priv = dev_get_drvdata(d);
891 if (!iwl_is_alive(priv))
894 return sprintf(buf, "%d\n", priv->temperature);
897 static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL);
899 static ssize_t show_tx_power(struct device *d,
900 struct device_attribute *attr, char *buf)
902 struct iwl_priv *priv = dev_get_drvdata(d);
904 if (!iwl_is_ready_rf(priv))
905 return sprintf(buf, "off\n");
907 return sprintf(buf, "%d\n", priv->tx_power_user_lmt);
910 static ssize_t store_tx_power(struct device *d,
911 struct device_attribute *attr,
912 const char *buf, size_t count)
914 struct iwl_priv *priv = dev_get_drvdata(d);
918 ret = strict_strtoul(buf, 10, &val);
920 IWL_INFO(priv, "%s is not in decimal form.\n", buf);
922 ret = iwl_set_tx_power(priv, val, false);
924 IWL_ERR(priv, "failed setting tx power (0x%d).\n",
932 static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, show_tx_power, store_tx_power);
934 static struct attribute *iwl_sysfs_entries[] = {
935 &dev_attr_temperature.attr,
936 &dev_attr_tx_power.attr,
937 #ifdef CONFIG_IWLWIFI_DEBUG
938 &dev_attr_debug_level.attr,
943 static struct attribute_group iwl_attribute_group = {
944 .name = NULL, /* put in device directory */
945 .attrs = iwl_sysfs_entries,
948 /******************************************************************************
950 * uCode download functions
952 ******************************************************************************/
954 static void iwl_free_fw_desc(struct iwl_priv *priv, struct fw_desc *desc)
957 dma_free_coherent(priv->bus.dev, desc->len,
958 desc->v_addr, desc->p_addr);
963 static void iwl_free_fw_img(struct iwl_priv *priv, struct fw_img *img)
965 iwl_free_fw_desc(priv, &img->code);
966 iwl_free_fw_desc(priv, &img->data);
969 static void iwl_dealloc_ucode(struct iwl_priv *priv)
971 iwl_free_fw_img(priv, &priv->ucode_rt);
972 iwl_free_fw_img(priv, &priv->ucode_init);
975 static int iwl_alloc_fw_desc(struct iwl_priv *priv, struct fw_desc *desc,
976 const void *data, size_t len)
983 desc->v_addr = dma_alloc_coherent(priv->bus.dev, len,
984 &desc->p_addr, GFP_KERNEL);
989 memcpy(desc->v_addr, data, len);
993 struct iwlagn_ucode_capabilities {
994 u32 max_probe_length;
995 u32 standard_phy_calibration_size;
999 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
1000 static int iwl_mac_setup_register(struct iwl_priv *priv,
1001 struct iwlagn_ucode_capabilities *capa);
1003 #define UCODE_EXPERIMENTAL_INDEX 100
1004 #define UCODE_EXPERIMENTAL_TAG "exp"
1006 static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
1008 const char *name_pre = priv->cfg->fw_name_pre;
1012 #ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
1013 priv->fw_index = UCODE_EXPERIMENTAL_INDEX;
1014 strcpy(tag, UCODE_EXPERIMENTAL_TAG);
1015 } else if (priv->fw_index == UCODE_EXPERIMENTAL_INDEX) {
1017 priv->fw_index = priv->cfg->ucode_api_max;
1018 sprintf(tag, "%d", priv->fw_index);
1021 sprintf(tag, "%d", priv->fw_index);
1024 if (priv->fw_index < priv->cfg->ucode_api_min) {
1025 IWL_ERR(priv, "no suitable firmware found!\n");
1029 sprintf(priv->firmware_name, "%s%s%s", name_pre, tag, ".ucode");
1031 IWL_DEBUG_INFO(priv, "attempting to load firmware %s'%s'\n",
1032 (priv->fw_index == UCODE_EXPERIMENTAL_INDEX)
1033 ? "EXPERIMENTAL " : "",
1034 priv->firmware_name);
1036 return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
1038 GFP_KERNEL, priv, iwl_ucode_callback);
1041 struct iwlagn_firmware_pieces {
1042 const void *inst, *data, *init, *init_data;
1043 size_t inst_size, data_size, init_size, init_data_size;
1047 u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr;
1048 u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr;
1051 static int iwlagn_load_legacy_firmware(struct iwl_priv *priv,
1052 const struct firmware *ucode_raw,
1053 struct iwlagn_firmware_pieces *pieces)
1055 struct iwl_ucode_header *ucode = (void *)ucode_raw->data;
1056 u32 api_ver, hdr_size;
1059 priv->ucode_ver = le32_to_cpu(ucode->ver);
1060 api_ver = IWL_UCODE_API(priv->ucode_ver);
1065 if (ucode_raw->size < hdr_size) {
1066 IWL_ERR(priv, "File size too small!\n");
1069 pieces->build = le32_to_cpu(ucode->u.v2.build);
1070 pieces->inst_size = le32_to_cpu(ucode->u.v2.inst_size);
1071 pieces->data_size = le32_to_cpu(ucode->u.v2.data_size);
1072 pieces->init_size = le32_to_cpu(ucode->u.v2.init_size);
1073 pieces->init_data_size = le32_to_cpu(ucode->u.v2.init_data_size);
1074 src = ucode->u.v2.data;
1080 if (ucode_raw->size < hdr_size) {
1081 IWL_ERR(priv, "File size too small!\n");
1085 pieces->inst_size = le32_to_cpu(ucode->u.v1.inst_size);
1086 pieces->data_size = le32_to_cpu(ucode->u.v1.data_size);
1087 pieces->init_size = le32_to_cpu(ucode->u.v1.init_size);
1088 pieces->init_data_size = le32_to_cpu(ucode->u.v1.init_data_size);
1089 src = ucode->u.v1.data;
1093 /* Verify size of file vs. image size info in file's header */
1094 if (ucode_raw->size != hdr_size + pieces->inst_size +
1095 pieces->data_size + pieces->init_size +
1096 pieces->init_data_size) {
1099 "uCode file size %d does not match expected size\n",
1100 (int)ucode_raw->size);
1105 src += pieces->inst_size;
1107 src += pieces->data_size;
1109 src += pieces->init_size;
1110 pieces->init_data = src;
1111 src += pieces->init_data_size;
1116 static int iwlagn_wanted_ucode_alternative = 1;
1118 static int iwlagn_load_firmware(struct iwl_priv *priv,
1119 const struct firmware *ucode_raw,
1120 struct iwlagn_firmware_pieces *pieces,
1121 struct iwlagn_ucode_capabilities *capa)
1123 struct iwl_tlv_ucode_header *ucode = (void *)ucode_raw->data;
1124 struct iwl_ucode_tlv *tlv;
1125 size_t len = ucode_raw->size;
1127 int wanted_alternative = iwlagn_wanted_ucode_alternative, tmp;
1130 enum iwl_ucode_tlv_type tlv_type;
1133 if (len < sizeof(*ucode)) {
1134 IWL_ERR(priv, "uCode has invalid length: %zd\n", len);
1138 if (ucode->magic != cpu_to_le32(IWL_TLV_UCODE_MAGIC)) {
1139 IWL_ERR(priv, "invalid uCode magic: 0X%x\n",
1140 le32_to_cpu(ucode->magic));
1145 * Check which alternatives are present, and "downgrade"
1146 * when the chosen alternative is not present, warning
1147 * the user when that happens. Some files may not have
1148 * any alternatives, so don't warn in that case.
1150 alternatives = le64_to_cpu(ucode->alternatives);
1151 tmp = wanted_alternative;
1152 if (wanted_alternative > 63)
1153 wanted_alternative = 63;
1154 while (wanted_alternative && !(alternatives & BIT(wanted_alternative)))
1155 wanted_alternative--;
1156 if (wanted_alternative && wanted_alternative != tmp)
1158 "uCode alternative %d not available, choosing %d\n",
1159 tmp, wanted_alternative);
1161 priv->ucode_ver = le32_to_cpu(ucode->ver);
1162 pieces->build = le32_to_cpu(ucode->build);
1165 len -= sizeof(*ucode);
1167 while (len >= sizeof(*tlv)) {
1170 len -= sizeof(*tlv);
1173 tlv_len = le32_to_cpu(tlv->length);
1174 tlv_type = le16_to_cpu(tlv->type);
1175 tlv_alt = le16_to_cpu(tlv->alternative);
1176 tlv_data = tlv->data;
1178 if (len < tlv_len) {
1179 IWL_ERR(priv, "invalid TLV len: %zd/%u\n",
1183 len -= ALIGN(tlv_len, 4);
1184 data += sizeof(*tlv) + ALIGN(tlv_len, 4);
1187 * Alternative 0 is always valid.
1189 * Skip alternative TLVs that are not selected.
1191 if (tlv_alt != 0 && tlv_alt != wanted_alternative)
1195 case IWL_UCODE_TLV_INST:
1196 pieces->inst = tlv_data;
1197 pieces->inst_size = tlv_len;
1199 case IWL_UCODE_TLV_DATA:
1200 pieces->data = tlv_data;
1201 pieces->data_size = tlv_len;
1203 case IWL_UCODE_TLV_INIT:
1204 pieces->init = tlv_data;
1205 pieces->init_size = tlv_len;
1207 case IWL_UCODE_TLV_INIT_DATA:
1208 pieces->init_data = tlv_data;
1209 pieces->init_data_size = tlv_len;
1211 case IWL_UCODE_TLV_BOOT:
1212 IWL_ERR(priv, "Found unexpected BOOT ucode\n");
1214 case IWL_UCODE_TLV_PROBE_MAX_LEN:
1215 if (tlv_len != sizeof(u32))
1216 goto invalid_tlv_len;
1217 capa->max_probe_length =
1218 le32_to_cpup((__le32 *)tlv_data);
1220 case IWL_UCODE_TLV_PAN:
1222 goto invalid_tlv_len;
1223 capa->flags |= IWL_UCODE_TLV_FLAGS_PAN;
1225 case IWL_UCODE_TLV_FLAGS:
1226 /* must be at least one u32 */
1227 if (tlv_len < sizeof(u32))
1228 goto invalid_tlv_len;
1229 /* and a proper number of u32s */
1230 if (tlv_len % sizeof(u32))
1231 goto invalid_tlv_len;
1233 * This driver only reads the first u32 as
1234 * right now no more features are defined,
1235 * if that changes then either the driver
1236 * will not work with the new firmware, or
1237 * it'll not take advantage of new features.
1239 capa->flags = le32_to_cpup((__le32 *)tlv_data);
1241 case IWL_UCODE_TLV_INIT_EVTLOG_PTR:
1242 if (tlv_len != sizeof(u32))
1243 goto invalid_tlv_len;
1244 pieces->init_evtlog_ptr =
1245 le32_to_cpup((__le32 *)tlv_data);
1247 case IWL_UCODE_TLV_INIT_EVTLOG_SIZE:
1248 if (tlv_len != sizeof(u32))
1249 goto invalid_tlv_len;
1250 pieces->init_evtlog_size =
1251 le32_to_cpup((__le32 *)tlv_data);
1253 case IWL_UCODE_TLV_INIT_ERRLOG_PTR:
1254 if (tlv_len != sizeof(u32))
1255 goto invalid_tlv_len;
1256 pieces->init_errlog_ptr =
1257 le32_to_cpup((__le32 *)tlv_data);
1259 case IWL_UCODE_TLV_RUNT_EVTLOG_PTR:
1260 if (tlv_len != sizeof(u32))
1261 goto invalid_tlv_len;
1262 pieces->inst_evtlog_ptr =
1263 le32_to_cpup((__le32 *)tlv_data);
1265 case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE:
1266 if (tlv_len != sizeof(u32))
1267 goto invalid_tlv_len;
1268 pieces->inst_evtlog_size =
1269 le32_to_cpup((__le32 *)tlv_data);
1271 case IWL_UCODE_TLV_RUNT_ERRLOG_PTR:
1272 if (tlv_len != sizeof(u32))
1273 goto invalid_tlv_len;
1274 pieces->inst_errlog_ptr =
1275 le32_to_cpup((__le32 *)tlv_data);
1277 case IWL_UCODE_TLV_ENHANCE_SENS_TBL:
1279 goto invalid_tlv_len;
1280 priv->enhance_sensitivity_table = true;
1282 case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE:
1283 if (tlv_len != sizeof(u32))
1284 goto invalid_tlv_len;
1285 capa->standard_phy_calibration_size =
1286 le32_to_cpup((__le32 *)tlv_data);
1289 IWL_DEBUG_INFO(priv, "unknown TLV: %d\n", tlv_type);
1295 IWL_ERR(priv, "invalid TLV after parsing: %zd\n", len);
1296 iwl_print_hex_dump(priv, IWL_DL_FW, (u8 *)data, len);
1303 IWL_ERR(priv, "TLV %d has invalid size: %u\n", tlv_type, tlv_len);
1304 iwl_print_hex_dump(priv, IWL_DL_FW, tlv_data, tlv_len);
1310 * iwl_ucode_callback - callback when firmware was loaded
1312 * If loaded successfully, copies the firmware into buffers
1313 * for the card to fetch (via DMA).
1315 static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
1317 struct iwl_priv *priv = context;
1318 struct iwl_ucode_header *ucode;
1320 struct iwlagn_firmware_pieces pieces;
1321 const unsigned int api_max = priv->cfg->ucode_api_max;
1322 const unsigned int api_min = priv->cfg->ucode_api_min;
1326 struct iwlagn_ucode_capabilities ucode_capa = {
1327 .max_probe_length = 200,
1328 .standard_phy_calibration_size =
1329 IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE,
1332 memset(&pieces, 0, sizeof(pieces));
1335 if (priv->fw_index <= priv->cfg->ucode_api_max)
1337 "request for firmware file '%s' failed.\n",
1338 priv->firmware_name);
1342 IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
1343 priv->firmware_name, ucode_raw->size);
1345 /* Make sure that we got at least the API version number */
1346 if (ucode_raw->size < 4) {
1347 IWL_ERR(priv, "File size way too small!\n");
1351 /* Data from ucode file: header followed by uCode images */
1352 ucode = (struct iwl_ucode_header *)ucode_raw->data;
1355 err = iwlagn_load_legacy_firmware(priv, ucode_raw, &pieces);
1357 err = iwlagn_load_firmware(priv, ucode_raw, &pieces,
1363 api_ver = IWL_UCODE_API(priv->ucode_ver);
1364 build = pieces.build;
1367 * api_ver should match the api version forming part of the
1368 * firmware filename ... but we don't check for that and only rely
1369 * on the API version read from firmware header from here on forward
1371 /* no api version check required for experimental uCode */
1372 if (priv->fw_index != UCODE_EXPERIMENTAL_INDEX) {
1373 if (api_ver < api_min || api_ver > api_max) {
1375 "Driver unable to support your firmware API. "
1376 "Driver supports v%u, firmware is v%u.\n",
1381 if (api_ver != api_max)
1383 "Firmware has old API version. Expected v%u, "
1384 "got v%u. New firmware can be obtained "
1385 "from http://www.intellinuxwireless.org.\n",
1390 sprintf(buildstr, " build %u%s", build,
1391 (priv->fw_index == UCODE_EXPERIMENTAL_INDEX)
1396 IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u%s\n",
1397 IWL_UCODE_MAJOR(priv->ucode_ver),
1398 IWL_UCODE_MINOR(priv->ucode_ver),
1399 IWL_UCODE_API(priv->ucode_ver),
1400 IWL_UCODE_SERIAL(priv->ucode_ver),
1403 snprintf(priv->hw->wiphy->fw_version,
1404 sizeof(priv->hw->wiphy->fw_version),
1406 IWL_UCODE_MAJOR(priv->ucode_ver),
1407 IWL_UCODE_MINOR(priv->ucode_ver),
1408 IWL_UCODE_API(priv->ucode_ver),
1409 IWL_UCODE_SERIAL(priv->ucode_ver),
1413 * For any of the failures below (before allocating pci memory)
1414 * we will try to load a version with a smaller API -- maybe the
1415 * user just got a corrupted version of the latest API.
1418 IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
1420 IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %Zd\n",
1422 IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %Zd\n",
1424 IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %Zd\n",
1426 IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %Zd\n",
1427 pieces.init_data_size);
1429 /* Verify that uCode images will fit in card's SRAM */
1430 if (pieces.inst_size > priv->hw_params.max_inst_size) {
1431 IWL_ERR(priv, "uCode instr len %Zd too large to fit in\n",
1436 if (pieces.data_size > priv->hw_params.max_data_size) {
1437 IWL_ERR(priv, "uCode data len %Zd too large to fit in\n",
1442 if (pieces.init_size > priv->hw_params.max_inst_size) {
1443 IWL_ERR(priv, "uCode init instr len %Zd too large to fit in\n",
1448 if (pieces.init_data_size > priv->hw_params.max_data_size) {
1449 IWL_ERR(priv, "uCode init data len %Zd too large to fit in\n",
1450 pieces.init_data_size);
1454 /* Allocate ucode buffers for card's bus-master loading ... */
1456 /* Runtime instructions and 2 copies of data:
1457 * 1) unmodified from disk
1458 * 2) backup cache for save/restore during power-downs */
1459 if (iwl_alloc_fw_desc(priv, &priv->ucode_rt.code,
1460 pieces.inst, pieces.inst_size))
1462 if (iwl_alloc_fw_desc(priv, &priv->ucode_rt.data,
1463 pieces.data, pieces.data_size))
1466 /* Initialization instructions and data */
1467 if (pieces.init_size && pieces.init_data_size) {
1468 if (iwl_alloc_fw_desc(priv, &priv->ucode_init.code,
1469 pieces.init, pieces.init_size))
1471 if (iwl_alloc_fw_desc(priv, &priv->ucode_init.data,
1472 pieces.init_data, pieces.init_data_size))
1476 /* Now that we can no longer fail, copy information */
1479 * The (size - 16) / 12 formula is based on the information recorded
1480 * for each event, which is of mode 1 (including timestamp) for all
1481 * new microcodes that include this information.
1483 priv->_agn.init_evtlog_ptr = pieces.init_evtlog_ptr;
1484 if (pieces.init_evtlog_size)
1485 priv->_agn.init_evtlog_size = (pieces.init_evtlog_size - 16)/12;
1487 priv->_agn.init_evtlog_size =
1488 priv->cfg->base_params->max_event_log_size;
1489 priv->_agn.init_errlog_ptr = pieces.init_errlog_ptr;
1490 priv->_agn.inst_evtlog_ptr = pieces.inst_evtlog_ptr;
1491 if (pieces.inst_evtlog_size)
1492 priv->_agn.inst_evtlog_size = (pieces.inst_evtlog_size - 16)/12;
1494 priv->_agn.inst_evtlog_size =
1495 priv->cfg->base_params->max_event_log_size;
1496 priv->_agn.inst_errlog_ptr = pieces.inst_errlog_ptr;
1498 priv->new_scan_threshold_behaviour =
1499 !!(ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWSCAN);
1501 if ((priv->cfg->sku & EEPROM_SKU_CAP_IPAN_ENABLE) &&
1502 (ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN)) {
1503 priv->valid_contexts |= BIT(IWL_RXON_CTX_PAN);
1504 priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN;
1506 priv->sta_key_max_num = STA_KEY_MAX_NUM;
1508 if (priv->valid_contexts != BIT(IWL_RXON_CTX_BSS))
1509 priv->cmd_queue = IWL_IPAN_CMD_QUEUE_NUM;
1511 priv->cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
1514 * figure out the offset of chain noise reset and gain commands
1515 * base on the size of standard phy calibration commands table size
1517 if (ucode_capa.standard_phy_calibration_size >
1518 IWL_MAX_PHY_CALIBRATE_TBL_SIZE)
1519 ucode_capa.standard_phy_calibration_size =
1520 IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE;
1522 priv->_agn.phy_calib_chain_noise_reset_cmd =
1523 ucode_capa.standard_phy_calibration_size;
1524 priv->_agn.phy_calib_chain_noise_gain_cmd =
1525 ucode_capa.standard_phy_calibration_size + 1;
1527 /**************************************************
1528 * This is still part of probe() in a sense...
1530 * 9. Setup and register with mac80211 and debugfs
1531 **************************************************/
1532 err = iwl_mac_setup_register(priv, &ucode_capa);
1536 err = iwl_dbgfs_register(priv, DRV_NAME);
1538 IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
1540 err = sysfs_create_group(&(priv->bus.dev->kobj),
1541 &iwl_attribute_group);
1543 IWL_ERR(priv, "failed to create sysfs device attributes\n");
1547 /* We have our copies now, allow OS release its copies */
1548 release_firmware(ucode_raw);
1549 complete(&priv->_agn.firmware_loading_complete);
1553 /* try next, if any */
1554 if (iwl_request_firmware(priv, false))
1556 release_firmware(ucode_raw);
1560 IWL_ERR(priv, "failed to allocate pci memory\n");
1561 iwl_dealloc_ucode(priv);
1563 complete(&priv->_agn.firmware_loading_complete);
1564 device_release_driver(priv->bus.dev);
1565 release_firmware(ucode_raw);
1568 static const char * const desc_lookup_text[] = {
1573 "NMI_INTERRUPT_WDG",
1577 "HW_ERROR_TUNE_LOCK",
1578 "HW_ERROR_TEMPERATURE",
1579 "ILLEGAL_CHAN_FREQ",
1582 "NMI_INTERRUPT_HOST",
1583 "NMI_INTERRUPT_ACTION_PT",
1584 "NMI_INTERRUPT_UNKNOWN",
1585 "UCODE_VERSION_MISMATCH",
1586 "HW_ERROR_ABS_LOCK",
1587 "HW_ERROR_CAL_LOCK_FAIL",
1588 "NMI_INTERRUPT_INST_ACTION_PT",
1589 "NMI_INTERRUPT_DATA_ACTION_PT",
1591 "NMI_INTERRUPT_TRM",
1592 "NMI_INTERRUPT_BREAK_POINT",
1599 static struct { char *name; u8 num; } advanced_lookup[] = {
1600 { "NMI_INTERRUPT_WDG", 0x34 },
1601 { "SYSASSERT", 0x35 },
1602 { "UCODE_VERSION_MISMATCH", 0x37 },
1603 { "BAD_COMMAND", 0x38 },
1604 { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C },
1605 { "FATAL_ERROR", 0x3D },
1606 { "NMI_TRM_HW_ERR", 0x46 },
1607 { "NMI_INTERRUPT_TRM", 0x4C },
1608 { "NMI_INTERRUPT_BREAK_POINT", 0x54 },
1609 { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C },
1610 { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 },
1611 { "NMI_INTERRUPT_HOST", 0x66 },
1612 { "NMI_INTERRUPT_ACTION_PT", 0x7C },
1613 { "NMI_INTERRUPT_UNKNOWN", 0x84 },
1614 { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 },
1615 { "ADVANCED_SYSASSERT", 0 },
1618 static const char *desc_lookup(u32 num)
1621 int max = ARRAY_SIZE(desc_lookup_text);
1624 return desc_lookup_text[num];
1626 max = ARRAY_SIZE(advanced_lookup) - 1;
1627 for (i = 0; i < max; i++) {
1628 if (advanced_lookup[i].num == num)
1631 return advanced_lookup[i].name;
1634 #define ERROR_START_OFFSET (1 * sizeof(u32))
1635 #define ERROR_ELEM_SIZE (7 * sizeof(u32))
1637 void iwl_dump_nic_error_log(struct iwl_priv *priv)
1640 struct iwl_error_event_table table;
1642 base = priv->device_pointers.error_event_table;
1643 if (priv->ucode_type == IWL_UCODE_INIT) {
1645 base = priv->_agn.init_errlog_ptr;
1648 base = priv->_agn.inst_errlog_ptr;
1651 if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
1653 "Not valid error log pointer 0x%08X for %s uCode\n",
1655 (priv->ucode_type == IWL_UCODE_INIT)
1660 iwl_read_targ_mem_words(priv, base, &table, sizeof(table));
1662 if (ERROR_START_OFFSET <= table.valid * ERROR_ELEM_SIZE) {
1663 IWL_ERR(priv, "Start IWL Error Log Dump:\n");
1664 IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
1665 priv->status, table.valid);
1668 priv->isr_stats.err_code = table.error_id;
1670 trace_iwlwifi_dev_ucode_error(priv, table.error_id, table.tsf_low,
1671 table.data1, table.data2, table.line,
1672 table.blink1, table.blink2, table.ilink1,
1673 table.ilink2, table.bcon_time, table.gp1,
1674 table.gp2, table.gp3, table.ucode_ver,
1675 table.hw_ver, table.brd_ver);
1676 IWL_ERR(priv, "0x%08X | %-28s\n", table.error_id,
1677 desc_lookup(table.error_id));
1678 IWL_ERR(priv, "0x%08X | uPc\n", table.pc);
1679 IWL_ERR(priv, "0x%08X | branchlink1\n", table.blink1);
1680 IWL_ERR(priv, "0x%08X | branchlink2\n", table.blink2);
1681 IWL_ERR(priv, "0x%08X | interruptlink1\n", table.ilink1);
1682 IWL_ERR(priv, "0x%08X | interruptlink2\n", table.ilink2);
1683 IWL_ERR(priv, "0x%08X | data1\n", table.data1);
1684 IWL_ERR(priv, "0x%08X | data2\n", table.data2);
1685 IWL_ERR(priv, "0x%08X | line\n", table.line);
1686 IWL_ERR(priv, "0x%08X | beacon time\n", table.bcon_time);
1687 IWL_ERR(priv, "0x%08X | tsf low\n", table.tsf_low);
1688 IWL_ERR(priv, "0x%08X | tsf hi\n", table.tsf_hi);
1689 IWL_ERR(priv, "0x%08X | time gp1\n", table.gp1);
1690 IWL_ERR(priv, "0x%08X | time gp2\n", table.gp2);
1691 IWL_ERR(priv, "0x%08X | time gp3\n", table.gp3);
1692 IWL_ERR(priv, "0x%08X | uCode version\n", table.ucode_ver);
1693 IWL_ERR(priv, "0x%08X | hw version\n", table.hw_ver);
1694 IWL_ERR(priv, "0x%08X | board version\n", table.brd_ver);
1695 IWL_ERR(priv, "0x%08X | hcmd\n", table.hcmd);
1698 #define EVENT_START_OFFSET (4 * sizeof(u32))
1701 * iwl_print_event_log - Dump error event log to syslog
1704 static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
1705 u32 num_events, u32 mode,
1706 int pos, char **buf, size_t bufsz)
1709 u32 base; /* SRAM byte address of event log header */
1710 u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
1711 u32 ptr; /* SRAM byte address of log data */
1712 u32 ev, time, data; /* event log data */
1713 unsigned long reg_flags;
1715 if (num_events == 0)
1718 base = priv->device_pointers.log_event_table;
1719 if (priv->ucode_type == IWL_UCODE_INIT) {
1721 base = priv->_agn.init_evtlog_ptr;
1724 base = priv->_agn.inst_evtlog_ptr;
1728 event_size = 2 * sizeof(u32);
1730 event_size = 3 * sizeof(u32);
1732 ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
1734 /* Make sure device is powered up for SRAM reads */
1735 spin_lock_irqsave(&priv->reg_lock, reg_flags);
1736 iwl_grab_nic_access(priv);
1738 /* Set starting address; reads will auto-increment */
1739 iwl_write32(priv, HBUS_TARG_MEM_RADDR, ptr);
1742 /* "time" is actually "data" for mode 0 (no timestamp).
1743 * place event id # at far right for easier visual parsing. */
1744 for (i = 0; i < num_events; i++) {
1745 ev = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
1746 time = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
1750 pos += scnprintf(*buf + pos, bufsz - pos,
1751 "EVT_LOG:0x%08x:%04u\n",
1754 trace_iwlwifi_dev_ucode_event(priv, 0,
1756 IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n",
1760 data = iwl_read32(priv, HBUS_TARG_MEM_RDAT);
1762 pos += scnprintf(*buf + pos, bufsz - pos,
1763 "EVT_LOGT:%010u:0x%08x:%04u\n",
1766 IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
1768 trace_iwlwifi_dev_ucode_event(priv, time,
1774 /* Allow device to power down */
1775 iwl_release_nic_access(priv);
1776 spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
1781 * iwl_print_last_event_logs - Dump the newest # of event log to syslog
1783 static int iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
1784 u32 num_wraps, u32 next_entry,
1786 int pos, char **buf, size_t bufsz)
1789 * display the newest DEFAULT_LOG_ENTRIES entries
1790 * i.e the entries just before the next ont that uCode would fill.
1793 if (next_entry < size) {
1794 pos = iwl_print_event_log(priv,
1795 capacity - (size - next_entry),
1796 size - next_entry, mode,
1798 pos = iwl_print_event_log(priv, 0,
1802 pos = iwl_print_event_log(priv, next_entry - size,
1803 size, mode, pos, buf, bufsz);
1805 if (next_entry < size) {
1806 pos = iwl_print_event_log(priv, 0, next_entry,
1807 mode, pos, buf, bufsz);
1809 pos = iwl_print_event_log(priv, next_entry - size,
1810 size, mode, pos, buf, bufsz);
1816 #define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
1818 int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
1819 char **buf, bool display)
1821 u32 base; /* SRAM byte address of event log header */
1822 u32 capacity; /* event log capacity in # entries */
1823 u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
1824 u32 num_wraps; /* # times uCode wrapped to top of log */
1825 u32 next_entry; /* index of next entry to be written by uCode */
1826 u32 size; /* # entries that we'll print */
1831 base = priv->device_pointers.log_event_table;
1832 if (priv->ucode_type == IWL_UCODE_INIT) {
1833 logsize = priv->_agn.init_evtlog_size;
1835 base = priv->_agn.init_evtlog_ptr;
1837 logsize = priv->_agn.inst_evtlog_size;
1839 base = priv->_agn.inst_evtlog_ptr;
1842 if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
1844 "Invalid event log pointer 0x%08X for %s uCode\n",
1846 (priv->ucode_type == IWL_UCODE_INIT)
1851 /* event log header */
1852 capacity = iwl_read_targ_mem(priv, base);
1853 mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
1854 num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
1855 next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
1857 if (capacity > logsize) {
1858 IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n",
1863 if (next_entry > logsize) {
1864 IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
1865 next_entry, logsize);
1866 next_entry = logsize;
1869 size = num_wraps ? capacity : next_entry;
1871 /* bail out if nothing in log */
1873 IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
1877 /* enable/disable bt channel inhibition */
1878 priv->bt_ch_announce = iwlagn_bt_ch_announce;
1880 #ifdef CONFIG_IWLWIFI_DEBUG
1881 if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) && !full_log)
1882 size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
1883 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
1885 size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
1886 ? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
1888 IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n",
1891 #ifdef CONFIG_IWLWIFI_DEBUG
1894 bufsz = capacity * 48;
1897 *buf = kmalloc(bufsz, GFP_KERNEL);
1901 if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
1903 * if uCode has wrapped back to top of log,
1904 * start at the oldest entry,
1905 * i.e the next one that uCode would fill.
1908 pos = iwl_print_event_log(priv, next_entry,
1909 capacity - next_entry, mode,
1911 /* (then/else) start at top of log */
1912 pos = iwl_print_event_log(priv, 0,
1913 next_entry, mode, pos, buf, bufsz);
1915 pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
1916 next_entry, size, mode,
1919 pos = iwl_print_last_event_logs(priv, capacity, num_wraps,
1920 next_entry, size, mode,
1926 static void iwl_rf_kill_ct_config(struct iwl_priv *priv)
1928 struct iwl_ct_kill_config cmd;
1929 struct iwl_ct_kill_throttling_config adv_cmd;
1930 unsigned long flags;
1933 spin_lock_irqsave(&priv->lock, flags);
1934 iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
1935 CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
1936 spin_unlock_irqrestore(&priv->lock, flags);
1937 priv->thermal_throttle.ct_kill_toggle = false;
1939 if (priv->cfg->base_params->support_ct_kill_exit) {
1940 adv_cmd.critical_temperature_enter =
1941 cpu_to_le32(priv->hw_params.ct_kill_threshold);
1942 adv_cmd.critical_temperature_exit =
1943 cpu_to_le32(priv->hw_params.ct_kill_exit_threshold);
1945 ret = trans_send_cmd_pdu(priv,
1946 REPLY_CT_KILL_CONFIG_CMD,
1947 CMD_SYNC, sizeof(adv_cmd), &adv_cmd);
1949 IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1951 IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
1953 "critical temperature enter is %d,"
1955 priv->hw_params.ct_kill_threshold,
1956 priv->hw_params.ct_kill_exit_threshold);
1958 cmd.critical_temperature_R =
1959 cpu_to_le32(priv->hw_params.ct_kill_threshold);
1961 ret = trans_send_cmd_pdu(priv,
1962 REPLY_CT_KILL_CONFIG_CMD,
1963 CMD_SYNC, sizeof(cmd), &cmd);
1965 IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
1967 IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
1969 "critical temperature is %d\n",
1970 priv->hw_params.ct_kill_threshold);
1974 static int iwlagn_send_calib_cfg_rt(struct iwl_priv *priv, u32 cfg)
1976 struct iwl_calib_cfg_cmd calib_cfg_cmd;
1977 struct iwl_host_cmd cmd = {
1978 .id = CALIBRATION_CFG_CMD,
1979 .len = { sizeof(struct iwl_calib_cfg_cmd), },
1980 .data = { &calib_cfg_cmd, },
1983 memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd));
1984 calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_INIT_CFG_ALL;
1985 calib_cfg_cmd.ucd_calib_cfg.once.start = cpu_to_le32(cfg);
1987 return trans_send_cmd(priv, &cmd);
1992 * iwl_alive_start - called after REPLY_ALIVE notification received
1993 * from protocol/runtime uCode (initialization uCode's
1994 * Alive gets handled by iwl_init_alive_start()).
1996 int iwl_alive_start(struct iwl_priv *priv)
1999 struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
2001 iwl_reset_ict(priv);
2003 IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
2005 /* After the ALIVE response, we can send host commands to the uCode */
2006 set_bit(STATUS_ALIVE, &priv->status);
2008 /* Enable watchdog to monitor the driver tx queues */
2009 iwl_setup_watchdog(priv);
2011 if (iwl_is_rfkill(priv))
2014 /* download priority table before any calibration request */
2015 if (priv->cfg->bt_params &&
2016 priv->cfg->bt_params->advanced_bt_coexist) {
2017 /* Configure Bluetooth device coexistence support */
2018 if (priv->cfg->bt_params->bt_sco_disable)
2019 priv->bt_enable_pspoll = false;
2021 priv->bt_enable_pspoll = true;
2023 priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
2024 priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
2025 priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
2026 iwlagn_send_advance_bt_config(priv);
2027 priv->bt_valid = IWLAGN_BT_VALID_ENABLE_FLAGS;
2028 priv->cur_rssi_ctx = NULL;
2030 iwlagn_send_prio_tbl(priv);
2032 /* FIXME: w/a to force change uCode BT state machine */
2033 ret = iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
2034 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
2037 ret = iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE,
2038 BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
2043 * default is 2-wire BT coexexistence support
2045 iwl_send_bt_config(priv);
2048 if (priv->hw_params.calib_rt_cfg)
2049 iwlagn_send_calib_cfg_rt(priv, priv->hw_params.calib_rt_cfg);
2051 ieee80211_wake_queues(priv->hw);
2053 priv->active_rate = IWL_RATES_MASK;
2055 /* Configure Tx antenna selection based on H/W config */
2056 iwlagn_send_tx_ant_config(priv, priv->cfg->valid_tx_ant);
2058 if (iwl_is_associated_ctx(ctx)) {
2059 struct iwl_rxon_cmd *active_rxon =
2060 (struct iwl_rxon_cmd *)&ctx->active;
2061 /* apply any changes in staging */
2062 ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
2063 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
2065 struct iwl_rxon_context *tmp;
2066 /* Initialize our rx_config data */
2067 for_each_context(priv, tmp)
2068 iwl_connection_init_rx_config(priv, tmp);
2070 iwlagn_set_rxon_chain(priv, ctx);
2073 iwl_reset_run_time_calib(priv);
2075 set_bit(STATUS_READY, &priv->status);
2077 /* Configure the adapter for unassociated operation */
2078 ret = iwlagn_commit_rxon(priv, ctx);
2082 /* At this point, the NIC is initialized and operational */
2083 iwl_rf_kill_ct_config(priv);
2085 IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
2087 return iwl_power_update_mode(priv, true);
2090 static void iwl_cancel_deferred_work(struct iwl_priv *priv);
2092 static void __iwl_down(struct iwl_priv *priv)
2096 IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
2098 iwl_scan_cancel_timeout(priv, 200);
2100 exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &priv->status);
2102 /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
2103 * to prevent rearm timer */
2104 del_timer_sync(&priv->watchdog);
2106 iwl_clear_ucode_stations(priv, NULL);
2107 iwl_dealloc_bcast_stations(priv);
2108 iwl_clear_driver_stations(priv);
2110 /* reset BT coex data */
2111 priv->bt_status = 0;
2112 priv->cur_rssi_ctx = NULL;
2113 priv->bt_is_sco = 0;
2114 if (priv->cfg->bt_params)
2115 priv->bt_traffic_load =
2116 priv->cfg->bt_params->bt_init_traffic_load;
2118 priv->bt_traffic_load = 0;
2119 priv->bt_full_concurrent = false;
2120 priv->bt_ci_compliance = 0;
2122 /* Wipe out the EXIT_PENDING status bit if we are not actually
2123 * exiting the module */
2125 clear_bit(STATUS_EXIT_PENDING, &priv->status);
2127 if (priv->mac80211_registered)
2128 ieee80211_stop_queues(priv->hw);
2130 /* Clear out all status bits but a few that are stable across reset */
2131 priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
2133 test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
2134 STATUS_GEO_CONFIGURED |
2135 test_bit(STATUS_FW_ERROR, &priv->status) <<
2137 test_bit(STATUS_EXIT_PENDING, &priv->status) <<
2138 STATUS_EXIT_PENDING;
2140 iwlagn_stop_device(priv);
2142 dev_kfree_skb(priv->beacon_skb);
2143 priv->beacon_skb = NULL;
2146 static void iwl_down(struct iwl_priv *priv)
2148 mutex_lock(&priv->mutex);
2150 mutex_unlock(&priv->mutex);
2152 iwl_cancel_deferred_work(priv);
2155 #define HW_READY_TIMEOUT (50)
2157 /* Note: returns poll_bit return value, which is >= 0 if success */
2158 static int iwl_set_hw_ready(struct iwl_priv *priv)
2162 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
2163 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
2165 /* See if we got it */
2166 ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
2167 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
2168 CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
2171 IWL_DEBUG_INFO(priv, "hardware%s ready\n", ret < 0 ? " not" : "");
2175 /* Note: returns standard 0/-ERROR code */
2176 int iwl_prepare_card_hw(struct iwl_priv *priv)
2180 IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter\n");
2182 ret = iwl_set_hw_ready(priv);
2186 /* If HW is not ready, prepare the conditions to check again */
2187 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
2188 CSR_HW_IF_CONFIG_REG_PREPARE);
2190 ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
2191 ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
2192 CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
2197 /* HW should be ready by now, check again. */
2198 ret = iwl_set_hw_ready(priv);
2204 #define MAX_HW_RESTARTS 5
2206 static int __iwl_up(struct iwl_priv *priv)
2208 struct iwl_rxon_context *ctx;
2211 lockdep_assert_held(&priv->mutex);
2213 if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
2214 IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
2218 for_each_context(priv, ctx) {
2219 ret = iwlagn_alloc_bcast_station(priv, ctx);
2221 iwl_dealloc_bcast_stations(priv);
2226 ret = iwlagn_run_init_ucode(priv);
2228 IWL_ERR(priv, "Failed to run INIT ucode: %d\n", ret);
2232 ret = iwlagn_load_ucode_wait_alive(priv,
2236 IWL_ERR(priv, "Failed to start RT ucode: %d\n", ret);
2240 ret = iwl_alive_start(priv);
2246 set_bit(STATUS_EXIT_PENDING, &priv->status);
2248 clear_bit(STATUS_EXIT_PENDING, &priv->status);
2250 IWL_ERR(priv, "Unable to initialize device.\n");
2255 /*****************************************************************************
2257 * Workqueue callbacks
2259 *****************************************************************************/
2261 static void iwl_bg_run_time_calib_work(struct work_struct *work)
2263 struct iwl_priv *priv = container_of(work, struct iwl_priv,
2264 run_time_calib_work);
2266 mutex_lock(&priv->mutex);
2268 if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
2269 test_bit(STATUS_SCANNING, &priv->status)) {
2270 mutex_unlock(&priv->mutex);
2274 if (priv->start_calib) {
2275 iwl_chain_noise_calibration(priv);
2276 iwl_sensitivity_calibration(priv);
2279 mutex_unlock(&priv->mutex);
2282 static void iwlagn_prepare_restart(struct iwl_priv *priv)
2284 struct iwl_rxon_context *ctx;
2285 bool bt_full_concurrent;
2286 u8 bt_ci_compliance;
2291 lockdep_assert_held(&priv->mutex);
2293 for_each_context(priv, ctx)
2298 * __iwl_down() will clear the BT status variables,
2299 * which is correct, but when we restart we really
2300 * want to keep them so restore them afterwards.
2302 * The restart process will later pick them up and
2303 * re-configure the hw when we reconfigure the BT
2306 bt_full_concurrent = priv->bt_full_concurrent;
2307 bt_ci_compliance = priv->bt_ci_compliance;
2308 bt_load = priv->bt_traffic_load;
2309 bt_status = priv->bt_status;
2310 bt_is_sco = priv->bt_is_sco;
2314 priv->bt_full_concurrent = bt_full_concurrent;
2315 priv->bt_ci_compliance = bt_ci_compliance;
2316 priv->bt_traffic_load = bt_load;
2317 priv->bt_status = bt_status;
2318 priv->bt_is_sco = bt_is_sco;
2321 static void iwl_bg_restart(struct work_struct *data)
2323 struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
2325 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2328 if (test_and_clear_bit(STATUS_FW_ERROR, &priv->status)) {
2329 mutex_lock(&priv->mutex);
2330 iwlagn_prepare_restart(priv);
2331 mutex_unlock(&priv->mutex);
2332 iwl_cancel_deferred_work(priv);
2333 ieee80211_restart_hw(priv->hw);
2339 static void iwl_bg_rx_replenish(struct work_struct *data)
2341 struct iwl_priv *priv =
2342 container_of(data, struct iwl_priv, rx_replenish);
2344 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2347 mutex_lock(&priv->mutex);
2348 iwlagn_rx_replenish(priv);
2349 mutex_unlock(&priv->mutex);
2352 static int iwl_mac_offchannel_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
2353 struct ieee80211_channel *chan,
2354 enum nl80211_channel_type channel_type,
2357 struct iwl_priv *priv = hw->priv;
2360 /* Not supported if we don't have PAN */
2361 if (!(priv->valid_contexts & BIT(IWL_RXON_CTX_PAN))) {
2366 /* Not supported on pre-P2P firmware */
2367 if (!(priv->contexts[IWL_RXON_CTX_PAN].interface_modes &
2368 BIT(NL80211_IFTYPE_P2P_CLIENT))) {
2373 mutex_lock(&priv->mutex);
2375 if (!priv->contexts[IWL_RXON_CTX_PAN].is_active) {
2377 * If the PAN context is free, use the normal
2378 * way of doing remain-on-channel offload + TX.
2384 /* TODO: queue up if scanning? */
2385 if (test_bit(STATUS_SCANNING, &priv->status) ||
2386 priv->_agn.offchan_tx_skb) {
2392 * max_scan_ie_len doesn't include the blank SSID or the header,
2393 * so need to add that again here.
2395 if (skb->len > hw->wiphy->max_scan_ie_len + 24 + 2) {
2400 priv->_agn.offchan_tx_skb = skb;
2401 priv->_agn.offchan_tx_timeout = wait;
2402 priv->_agn.offchan_tx_chan = chan;
2404 ret = iwl_scan_initiate(priv, priv->contexts[IWL_RXON_CTX_PAN].vif,
2405 IWL_SCAN_OFFCH_TX, chan->band);
2407 priv->_agn.offchan_tx_skb = NULL;
2409 mutex_unlock(&priv->mutex);
2417 static int iwl_mac_offchannel_tx_cancel_wait(struct ieee80211_hw *hw)
2419 struct iwl_priv *priv = hw->priv;
2422 mutex_lock(&priv->mutex);
2424 if (!priv->_agn.offchan_tx_skb) {
2429 priv->_agn.offchan_tx_skb = NULL;
2431 ret = iwl_scan_cancel_timeout(priv, 200);
2435 mutex_unlock(&priv->mutex);
2440 /*****************************************************************************
2442 * mac80211 entry point functions
2444 *****************************************************************************/
2446 static const struct ieee80211_iface_limit iwlagn_sta_ap_limits[] = {
2449 .types = BIT(NL80211_IFTYPE_STATION),
2453 .types = BIT(NL80211_IFTYPE_AP),
2457 static const struct ieee80211_iface_limit iwlagn_2sta_limits[] = {
2460 .types = BIT(NL80211_IFTYPE_STATION),
2464 static const struct ieee80211_iface_limit iwlagn_p2p_sta_go_limits[] = {
2467 .types = BIT(NL80211_IFTYPE_STATION),
2471 .types = BIT(NL80211_IFTYPE_P2P_GO) |
2472 BIT(NL80211_IFTYPE_AP),
2476 static const struct ieee80211_iface_limit iwlagn_p2p_2sta_limits[] = {
2479 .types = BIT(NL80211_IFTYPE_STATION),
2483 .types = BIT(NL80211_IFTYPE_P2P_CLIENT),
2487 static const struct ieee80211_iface_combination
2488 iwlagn_iface_combinations_dualmode[] = {
2489 { .num_different_channels = 1,
2490 .max_interfaces = 2,
2491 .beacon_int_infra_match = true,
2492 .limits = iwlagn_sta_ap_limits,
2493 .n_limits = ARRAY_SIZE(iwlagn_sta_ap_limits),
2495 { .num_different_channels = 1,
2496 .max_interfaces = 2,
2497 .limits = iwlagn_2sta_limits,
2498 .n_limits = ARRAY_SIZE(iwlagn_2sta_limits),
2502 static const struct ieee80211_iface_combination
2503 iwlagn_iface_combinations_p2p[] = {
2504 { .num_different_channels = 1,
2505 .max_interfaces = 2,
2506 .beacon_int_infra_match = true,
2507 .limits = iwlagn_p2p_sta_go_limits,
2508 .n_limits = ARRAY_SIZE(iwlagn_p2p_sta_go_limits),
2510 { .num_different_channels = 1,
2511 .max_interfaces = 2,
2512 .limits = iwlagn_p2p_2sta_limits,
2513 .n_limits = ARRAY_SIZE(iwlagn_p2p_2sta_limits),
2518 * Not a mac80211 entry point function, but it fits in with all the
2519 * other mac80211 functions grouped here.
2521 static int iwl_mac_setup_register(struct iwl_priv *priv,
2522 struct iwlagn_ucode_capabilities *capa)
2525 struct ieee80211_hw *hw = priv->hw;
2526 struct iwl_rxon_context *ctx;
2528 hw->rate_control_algorithm = "iwl-agn-rs";
2530 /* Tell mac80211 our characteristics */
2531 hw->flags = IEEE80211_HW_SIGNAL_DBM |
2532 IEEE80211_HW_AMPDU_AGGREGATION |
2533 IEEE80211_HW_NEED_DTIM_PERIOD |
2534 IEEE80211_HW_SPECTRUM_MGMT |
2535 IEEE80211_HW_REPORTS_TX_ACK_STATUS;
2537 hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
2539 hw->flags |= IEEE80211_HW_SUPPORTS_PS |
2540 IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
2542 if (priv->cfg->sku & EEPROM_SKU_CAP_11N_ENABLE)
2543 hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
2544 IEEE80211_HW_SUPPORTS_STATIC_SMPS;
2546 if (capa->flags & IWL_UCODE_TLV_FLAGS_MFP)
2547 hw->flags |= IEEE80211_HW_MFP_CAPABLE;
2549 hw->sta_data_size = sizeof(struct iwl_station_priv);
2550 hw->vif_data_size = sizeof(struct iwl_vif_priv);
2552 for_each_context(priv, ctx) {
2553 hw->wiphy->interface_modes |= ctx->interface_modes;
2554 hw->wiphy->interface_modes |= ctx->exclusive_interface_modes;
2557 BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
2559 if (hw->wiphy->interface_modes & BIT(NL80211_IFTYPE_P2P_CLIENT)) {
2560 hw->wiphy->iface_combinations = iwlagn_iface_combinations_p2p;
2561 hw->wiphy->n_iface_combinations =
2562 ARRAY_SIZE(iwlagn_iface_combinations_p2p);
2563 } else if (hw->wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) {
2564 hw->wiphy->iface_combinations = iwlagn_iface_combinations_dualmode;
2565 hw->wiphy->n_iface_combinations =
2566 ARRAY_SIZE(iwlagn_iface_combinations_dualmode);
2569 hw->wiphy->max_remain_on_channel_duration = 1000;
2571 hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
2572 WIPHY_FLAG_DISABLE_BEACON_HINTS |
2573 WIPHY_FLAG_IBSS_RSN;
2575 if (iwlagn_mod_params.power_save)
2576 hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
2578 hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
2580 hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
2581 /* we create the 802.11 header and a zero-length SSID element */
2582 hw->wiphy->max_scan_ie_len = capa->max_probe_length - 24 - 2;
2584 /* Default value; 4 EDCA QOS priorities */
2587 hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
2589 if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
2590 priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
2591 &priv->bands[IEEE80211_BAND_2GHZ];
2592 if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
2593 priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
2594 &priv->bands[IEEE80211_BAND_5GHZ];
2596 iwl_leds_init(priv);
2598 ret = ieee80211_register_hw(priv->hw);
2600 IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
2603 priv->mac80211_registered = 1;
2609 static int iwlagn_mac_start(struct ieee80211_hw *hw)
2611 struct iwl_priv *priv = hw->priv;
2614 IWL_DEBUG_MAC80211(priv, "enter\n");
2616 /* we should be verifying the device is ready to be opened */
2617 mutex_lock(&priv->mutex);
2618 ret = __iwl_up(priv);
2619 mutex_unlock(&priv->mutex);
2623 IWL_DEBUG_INFO(priv, "Start UP work done.\n");
2625 /* Now we should be done, and the READY bit should be set. */
2626 if (WARN_ON(!test_bit(STATUS_READY, &priv->status)))
2629 iwlagn_led_enable(priv);
2632 IWL_DEBUG_MAC80211(priv, "leave\n");
2636 static void iwlagn_mac_stop(struct ieee80211_hw *hw)
2638 struct iwl_priv *priv = hw->priv;
2640 IWL_DEBUG_MAC80211(priv, "enter\n");
2649 flush_workqueue(priv->workqueue);
2651 /* User space software may expect getting rfkill changes
2652 * even if interface is down */
2653 iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
2654 iwl_enable_rfkill_int(priv);
2656 IWL_DEBUG_MAC80211(priv, "leave\n");
2659 static void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
2661 struct iwl_priv *priv = hw->priv;
2663 IWL_DEBUG_MACDUMP(priv, "enter\n");
2665 IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
2666 ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
2668 if (iwlagn_tx_skb(priv, skb))
2669 dev_kfree_skb_any(skb);
2671 IWL_DEBUG_MACDUMP(priv, "leave\n");
2674 static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
2675 struct ieee80211_vif *vif,
2676 struct ieee80211_key_conf *keyconf,
2677 struct ieee80211_sta *sta,
2678 u32 iv32, u16 *phase1key)
2680 struct iwl_priv *priv = hw->priv;
2681 struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
2683 IWL_DEBUG_MAC80211(priv, "enter\n");
2685 iwl_update_tkip_key(priv, vif_priv->ctx, keyconf, sta,
2688 IWL_DEBUG_MAC80211(priv, "leave\n");
2691 static int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2692 struct ieee80211_vif *vif,
2693 struct ieee80211_sta *sta,
2694 struct ieee80211_key_conf *key)
2696 struct iwl_priv *priv = hw->priv;
2697 struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
2698 struct iwl_rxon_context *ctx = vif_priv->ctx;
2701 bool is_default_wep_key = false;
2703 IWL_DEBUG_MAC80211(priv, "enter\n");
2705 if (iwlagn_mod_params.sw_crypto) {
2706 IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
2711 * To support IBSS RSN, don't program group keys in IBSS, the
2712 * hardware will then not attempt to decrypt the frames.
2714 if (vif->type == NL80211_IFTYPE_ADHOC &&
2715 !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
2718 sta_id = iwl_sta_id_or_broadcast(priv, vif_priv->ctx, sta);
2719 if (sta_id == IWL_INVALID_STATION)
2722 mutex_lock(&priv->mutex);
2723 iwl_scan_cancel_timeout(priv, 100);
2726 * If we are getting WEP group key and we didn't receive any key mapping
2727 * so far, we are in legacy wep mode (group key only), otherwise we are
2729 * In legacy wep mode, we use another host command to the uCode.
2731 if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
2732 key->cipher == WLAN_CIPHER_SUITE_WEP104) &&
2735 is_default_wep_key = !ctx->key_mapping_keys;
2737 is_default_wep_key =
2738 (key->hw_key_idx == HW_KEY_DEFAULT);
2743 if (is_default_wep_key)
2744 ret = iwl_set_default_wep_key(priv, vif_priv->ctx, key);
2746 ret = iwl_set_dynamic_key(priv, vif_priv->ctx,
2749 IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
2752 if (is_default_wep_key)
2753 ret = iwl_remove_default_wep_key(priv, ctx, key);
2755 ret = iwl_remove_dynamic_key(priv, ctx, key, sta_id);
2757 IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
2763 mutex_unlock(&priv->mutex);
2764 IWL_DEBUG_MAC80211(priv, "leave\n");
2769 static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
2770 struct ieee80211_vif *vif,
2771 enum ieee80211_ampdu_mlme_action action,
2772 struct ieee80211_sta *sta, u16 tid, u16 *ssn,
2775 struct iwl_priv *priv = hw->priv;
2777 struct iwl_station_priv *sta_priv = (void *) sta->drv_priv;
2779 IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
2782 if (!(priv->cfg->sku & EEPROM_SKU_CAP_11N_ENABLE))
2785 mutex_lock(&priv->mutex);
2788 case IEEE80211_AMPDU_RX_START:
2789 IWL_DEBUG_HT(priv, "start Rx\n");
2790 ret = iwl_sta_rx_agg_start(priv, sta, tid, *ssn);
2792 case IEEE80211_AMPDU_RX_STOP:
2793 IWL_DEBUG_HT(priv, "stop Rx\n");
2794 ret = iwl_sta_rx_agg_stop(priv, sta, tid);
2795 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2798 case IEEE80211_AMPDU_TX_START:
2799 IWL_DEBUG_HT(priv, "start Tx\n");
2800 ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn);
2802 priv->_agn.agg_tids_count++;
2803 IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n",
2804 priv->_agn.agg_tids_count);
2807 case IEEE80211_AMPDU_TX_STOP:
2808 IWL_DEBUG_HT(priv, "stop Tx\n");
2809 ret = iwlagn_tx_agg_stop(priv, vif, sta, tid);
2810 if ((ret == 0) && (priv->_agn.agg_tids_count > 0)) {
2811 priv->_agn.agg_tids_count--;
2812 IWL_DEBUG_HT(priv, "priv->_agn.agg_tids_count = %u\n",
2813 priv->_agn.agg_tids_count);
2815 if (test_bit(STATUS_EXIT_PENDING, &priv->status))
2817 if (priv->cfg->ht_params &&
2818 priv->cfg->ht_params->use_rts_for_aggregation) {
2820 * switch off RTS/CTS if it was previously enabled
2822 sta_priv->lq_sta.lq.general_params.flags &=
2823 ~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
2824 iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif),
2825 &sta_priv->lq_sta.lq, CMD_ASYNC, false);
2828 case IEEE80211_AMPDU_TX_OPERATIONAL:
2829 buf_size = min_t(int, buf_size, LINK_QUAL_AGG_FRAME_LIMIT_DEF);
2831 iwlagn_txq_agg_queue_setup(priv, sta, tid, buf_size);
2834 * If the limit is 0, then it wasn't initialised yet,
2835 * use the default. We can do that since we take the
2836 * minimum below, and we don't want to go above our
2837 * default due to hardware restrictions.
2839 if (sta_priv->max_agg_bufsize == 0)
2840 sta_priv->max_agg_bufsize =
2841 LINK_QUAL_AGG_FRAME_LIMIT_DEF;
2844 * Even though in theory the peer could have different
2845 * aggregation reorder buffer sizes for different sessions,
2846 * our ucode doesn't allow for that and has a global limit
2847 * for each station. Therefore, use the minimum of all the
2848 * aggregation sessions and our default value.
2850 sta_priv->max_agg_bufsize =
2851 min(sta_priv->max_agg_bufsize, buf_size);
2853 if (priv->cfg->ht_params &&
2854 priv->cfg->ht_params->use_rts_for_aggregation) {
2856 * switch to RTS/CTS if it is the prefer protection
2857 * method for HT traffic
2860 sta_priv->lq_sta.lq.general_params.flags |=
2861 LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
2864 sta_priv->lq_sta.lq.agg_params.agg_frame_cnt_limit =
2865 sta_priv->max_agg_bufsize;
2867 iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif),
2868 &sta_priv->lq_sta.lq, CMD_ASYNC, false);
2870 IWL_INFO(priv, "Tx aggregation enabled on ra = %pM tid = %d\n",
2875 mutex_unlock(&priv->mutex);
2880 static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
2881 struct ieee80211_vif *vif,
2882 struct ieee80211_sta *sta)
2884 struct iwl_priv *priv = hw->priv;
2885 struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
2886 struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
2887 bool is_ap = vif->type == NL80211_IFTYPE_STATION;
2891 IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
2893 mutex_lock(&priv->mutex);
2894 IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
2896 sta_priv->common.sta_id = IWL_INVALID_STATION;
2898 atomic_set(&sta_priv->pending_frames, 0);
2899 if (vif->type == NL80211_IFTYPE_AP)
2900 sta_priv->client = true;
2902 ret = iwl_add_station_common(priv, vif_priv->ctx, sta->addr,
2903 is_ap, sta, &sta_id);
2905 IWL_ERR(priv, "Unable to add station %pM (%d)\n",
2907 /* Should we return success if return code is EEXIST ? */
2908 mutex_unlock(&priv->mutex);
2912 sta_priv->common.sta_id = sta_id;
2914 /* Initialize rate scaling */
2915 IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
2917 iwl_rs_rate_init(priv, sta, sta_id);
2918 mutex_unlock(&priv->mutex);
2923 static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
2924 struct ieee80211_channel_switch *ch_switch)
2926 struct iwl_priv *priv = hw->priv;
2927 const struct iwl_channel_info *ch_info;
2928 struct ieee80211_conf *conf = &hw->conf;
2929 struct ieee80211_channel *channel = ch_switch->channel;
2930 struct iwl_ht_config *ht_conf = &priv->current_ht_config;
2933 * When we add support for multiple interfaces, we need to
2934 * revisit this. The channel switch command in the device
2935 * only affects the BSS context, but what does that really
2936 * mean? And what if we get a CSA on the second interface?
2937 * This needs a lot of work.
2939 struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
2942 IWL_DEBUG_MAC80211(priv, "enter\n");
2944 mutex_lock(&priv->mutex);
2946 if (iwl_is_rfkill(priv))
2949 if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
2950 test_bit(STATUS_SCANNING, &priv->status) ||
2951 test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
2954 if (!iwl_is_associated_ctx(ctx))
2957 if (!priv->cfg->ops->lib->set_channel_switch)
2960 ch = channel->hw_value;
2961 if (le16_to_cpu(ctx->active.channel) == ch)
2964 ch_info = iwl_get_channel_info(priv, channel->band, ch);
2965 if (!is_channel_valid(ch_info)) {
2966 IWL_DEBUG_MAC80211(priv, "invalid channel\n");
2970 spin_lock_irq(&priv->lock);
2972 priv->current_ht_config.smps = conf->smps_mode;
2974 /* Configure HT40 channels */
2975 ctx->ht.enabled = conf_is_ht(conf);
2976 if (ctx->ht.enabled) {
2977 if (conf_is_ht40_minus(conf)) {
2978 ctx->ht.extension_chan_offset =
2979 IEEE80211_HT_PARAM_CHA_SEC_BELOW;
2980 ctx->ht.is_40mhz = true;
2981 } else if (conf_is_ht40_plus(conf)) {
2982 ctx->ht.extension_chan_offset =
2983 IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
2984 ctx->ht.is_40mhz = true;
2986 ctx->ht.extension_chan_offset =
2987 IEEE80211_HT_PARAM_CHA_SEC_NONE;
2988 ctx->ht.is_40mhz = false;
2991 ctx->ht.is_40mhz = false;
2993 if ((le16_to_cpu(ctx->staging.channel) != ch))
2994 ctx->staging.flags = 0;
2996 iwl_set_rxon_channel(priv, channel, ctx);
2997 iwl_set_rxon_ht(priv, ht_conf);
2998 iwl_set_flags_for_band(priv, ctx, channel->band, ctx->vif);
3000 spin_unlock_irq(&priv->lock);
3004 * at this point, staging_rxon has the
3005 * configuration for channel switch
3007 set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
3008 priv->switch_channel = cpu_to_le16(ch);
3009 if (priv->cfg->ops->lib->set_channel_switch(priv, ch_switch)) {
3010 clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status);
3011 priv->switch_channel = 0;
3012 ieee80211_chswitch_done(ctx->vif, false);
3016 mutex_unlock(&priv->mutex);
3017 IWL_DEBUG_MAC80211(priv, "leave\n");
3020 static void iwlagn_configure_filter(struct ieee80211_hw *hw,
3021 unsigned int changed_flags,
3022 unsigned int *total_flags,
3025 struct iwl_priv *priv = hw->priv;
3026 __le32 filter_or = 0, filter_nand = 0;
3027 struct iwl_rxon_context *ctx;
3029 #define CHK(test, flag) do { \
3030 if (*total_flags & (test)) \
3031 filter_or |= (flag); \
3033 filter_nand |= (flag); \
3036 IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n",
3037 changed_flags, *total_flags);
3039 CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
3040 /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */
3041 CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK);
3042 CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
3046 mutex_lock(&priv->mutex);
3048 for_each_context(priv, ctx) {
3049 ctx->staging.filter_flags &= ~filter_nand;
3050 ctx->staging.filter_flags |= filter_or;
3053 * Not committing directly because hardware can perform a scan,
3054 * but we'll eventually commit the filter flags change anyway.
3058 mutex_unlock(&priv->mutex);
3061 * Receiving all multicast frames is always enabled by the
3062 * default flags setup in iwl_connection_init_rx_config()
3063 * since we currently do not support programming multicast
3064 * filters into the device.
3066 *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
3067 FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
3070 static void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop)
3072 struct iwl_priv *priv = hw->priv;
3074 mutex_lock(&priv->mutex);
3075 IWL_DEBUG_MAC80211(priv, "enter\n");
3077 if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
3078 IWL_DEBUG_TX(priv, "Aborting flush due to device shutdown\n");
3081 if (iwl_is_rfkill(priv)) {
3082 IWL_DEBUG_TX(priv, "Aborting flush due to RF Kill\n");
3087 * mac80211 will not push any more frames for transmit
3088 * until the flush is completed
3091 IWL_DEBUG_MAC80211(priv, "send flush command\n");
3092 if (iwlagn_txfifo_flush(priv, IWL_DROP_ALL)) {
3093 IWL_ERR(priv, "flush request fail\n");
3097 IWL_DEBUG_MAC80211(priv, "wait transmit/flush all frames\n");
3098 iwlagn_wait_tx_queue_empty(priv);
3100 mutex_unlock(&priv->mutex);
3101 IWL_DEBUG_MAC80211(priv, "leave\n");
3104 static void iwlagn_disable_roc(struct iwl_priv *priv)
3106 struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN];
3107 struct ieee80211_channel *chan = ACCESS_ONCE(priv->hw->conf.channel);
3109 lockdep_assert_held(&priv->mutex);
3111 if (!ctx->is_active)
3114 ctx->staging.dev_type = RXON_DEV_TYPE_2STA;
3115 ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
3116 iwl_set_rxon_channel(priv, chan, ctx);
3117 iwl_set_flags_for_band(priv, ctx, chan->band, NULL);
3119 priv->_agn.hw_roc_channel = NULL;
3121 iwlagn_commit_rxon(priv, ctx);
3123 ctx->is_active = false;
3126 static void iwlagn_bg_roc_done(struct work_struct *work)
3128 struct iwl_priv *priv = container_of(work, struct iwl_priv,
3129 _agn.hw_roc_work.work);
3131 mutex_lock(&priv->mutex);
3132 ieee80211_remain_on_channel_expired(priv->hw);
3133 iwlagn_disable_roc(priv);
3134 mutex_unlock(&priv->mutex);
3137 static int iwl_mac_remain_on_channel(struct ieee80211_hw *hw,
3138 struct ieee80211_channel *channel,
3139 enum nl80211_channel_type channel_type,
3142 struct iwl_priv *priv = hw->priv;
3145 if (!(priv->valid_contexts & BIT(IWL_RXON_CTX_PAN)))
3148 if (!(priv->contexts[IWL_RXON_CTX_PAN].interface_modes &
3149 BIT(NL80211_IFTYPE_P2P_CLIENT)))
3152 mutex_lock(&priv->mutex);
3154 if (priv->contexts[IWL_RXON_CTX_PAN].is_active ||
3155 test_bit(STATUS_SCAN_HW, &priv->status)) {
3160 priv->contexts[IWL_RXON_CTX_PAN].is_active = true;
3161 priv->_agn.hw_roc_channel = channel;
3162 priv->_agn.hw_roc_chantype = channel_type;
3163 priv->_agn.hw_roc_duration = DIV_ROUND_UP(duration * 1000, 1024);
3164 iwlagn_commit_rxon(priv, &priv->contexts[IWL_RXON_CTX_PAN]);
3165 queue_delayed_work(priv->workqueue, &priv->_agn.hw_roc_work,
3166 msecs_to_jiffies(duration + 20));
3168 msleep(IWL_MIN_SLOT_TIME); /* TU is almost ms */
3169 ieee80211_ready_on_channel(priv->hw);
3172 mutex_unlock(&priv->mutex);
3177 static int iwl_mac_cancel_remain_on_channel(struct ieee80211_hw *hw)
3179 struct iwl_priv *priv = hw->priv;
3181 if (!(priv->valid_contexts & BIT(IWL_RXON_CTX_PAN)))
3184 cancel_delayed_work_sync(&priv->_agn.hw_roc_work);
3186 mutex_lock(&priv->mutex);
3187 iwlagn_disable_roc(priv);
3188 mutex_unlock(&priv->mutex);
3193 /*****************************************************************************
3195 * driver setup and teardown
3197 *****************************************************************************/
3199 static void iwl_setup_deferred_work(struct iwl_priv *priv)
3201 priv->workqueue = create_singlethread_workqueue(DRV_NAME);
3203 init_waitqueue_head(&priv->wait_command_queue);
3205 INIT_WORK(&priv->restart, iwl_bg_restart);
3206 INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish);
3207 INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
3208 INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
3209 INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush);
3210 INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency);
3211 INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config);
3212 INIT_DELAYED_WORK(&priv->_agn.hw_roc_work, iwlagn_bg_roc_done);
3214 iwl_setup_scan_deferred_work(priv);
3216 if (priv->cfg->ops->lib->setup_deferred_work)
3217 priv->cfg->ops->lib->setup_deferred_work(priv);
3219 init_timer(&priv->statistics_periodic);
3220 priv->statistics_periodic.data = (unsigned long)priv;
3221 priv->statistics_periodic.function = iwl_bg_statistics_periodic;
3223 init_timer(&priv->ucode_trace);
3224 priv->ucode_trace.data = (unsigned long)priv;
3225 priv->ucode_trace.function = iwl_bg_ucode_trace;
3227 init_timer(&priv->watchdog);
3228 priv->watchdog.data = (unsigned long)priv;
3229 priv->watchdog.function = iwl_bg_watchdog;
3231 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
3232 iwl_irq_tasklet, (unsigned long)priv);
3235 static void iwl_cancel_deferred_work(struct iwl_priv *priv)
3237 if (priv->cfg->ops->lib->cancel_deferred_work)
3238 priv->cfg->ops->lib->cancel_deferred_work(priv);
3240 cancel_work_sync(&priv->run_time_calib_work);
3241 cancel_work_sync(&priv->beacon_update);
3243 iwl_cancel_scan_deferred_work(priv);
3245 cancel_work_sync(&priv->bt_full_concurrency);
3246 cancel_work_sync(&priv->bt_runtime_config);
3248 del_timer_sync(&priv->statistics_periodic);
3249 del_timer_sync(&priv->ucode_trace);
3252 static void iwl_init_hw_rates(struct iwl_priv *priv,
3253 struct ieee80211_rate *rates)
3257 for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
3258 rates[i].bitrate = iwl_rates[i].ieee * 5;
3259 rates[i].hw_value = i; /* Rate scaling will work on indexes */
3260 rates[i].hw_value_short = i;
3262 if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
3264 * If CCK != 1M then set short preamble rate flag.
3267 (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
3268 0 : IEEE80211_RATE_SHORT_PREAMBLE;
3273 static int iwl_init_drv(struct iwl_priv *priv)
3277 spin_lock_init(&priv->sta_lock);
3278 spin_lock_init(&priv->hcmd_lock);
3280 mutex_init(&priv->mutex);
3282 priv->ieee_channels = NULL;
3283 priv->ieee_rates = NULL;
3284 priv->band = IEEE80211_BAND_2GHZ;
3286 priv->iw_mode = NL80211_IFTYPE_STATION;
3287 priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
3288 priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
3289 priv->_agn.agg_tids_count = 0;
3291 /* initialize force reset */
3292 priv->force_reset[IWL_RF_RESET].reset_duration =
3293 IWL_DELAY_NEXT_FORCE_RF_RESET;
3294 priv->force_reset[IWL_FW_RESET].reset_duration =
3295 IWL_DELAY_NEXT_FORCE_FW_RELOAD;
3297 priv->rx_statistics_jiffies = jiffies;
3299 /* Choose which receivers/antennas to use */
3300 iwlagn_set_rxon_chain(priv, &priv->contexts[IWL_RXON_CTX_BSS]);
3302 iwl_init_scan_params(priv);
3305 if (priv->cfg->bt_params &&
3306 priv->cfg->bt_params->advanced_bt_coexist) {
3307 priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
3308 priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
3309 priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
3310 priv->bt_on_thresh = BT_ON_THRESHOLD_DEF;
3311 priv->bt_duration = BT_DURATION_LIMIT_DEF;
3312 priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF;
3315 ret = iwl_init_channel_map(priv);
3317 IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
3321 ret = iwlcore_init_geos(priv);
3323 IWL_ERR(priv, "initializing geos failed: %d\n", ret);
3324 goto err_free_channel_map;
3326 iwl_init_hw_rates(priv, priv->ieee_rates);
3330 err_free_channel_map:
3331 iwl_free_channel_map(priv);
3336 static void iwl_uninit_drv(struct iwl_priv *priv)
3338 iwl_calib_free_results(priv);
3339 iwlcore_free_geos(priv);
3340 iwl_free_channel_map(priv);
3341 kfree(priv->scan_cmd);
3342 kfree(priv->beacon_cmd);
3345 static void iwl_mac_rssi_callback(struct ieee80211_hw *hw,
3346 enum ieee80211_rssi_event rssi_event)
3348 struct iwl_priv *priv = hw->priv;
3350 mutex_lock(&priv->mutex);
3352 if (priv->cfg->bt_params &&
3353 priv->cfg->bt_params->advanced_bt_coexist) {
3354 if (rssi_event == RSSI_EVENT_LOW)
3355 priv->bt_enable_pspoll = true;
3356 else if (rssi_event == RSSI_EVENT_HIGH)
3357 priv->bt_enable_pspoll = false;
3359 iwlagn_send_advance_bt_config(priv);
3361 IWL_DEBUG_MAC80211(priv, "Advanced BT coex disabled,"
3362 "ignoring RSSI callback\n");
3365 mutex_unlock(&priv->mutex);
3368 struct ieee80211_ops iwlagn_hw_ops = {
3369 .tx = iwlagn_mac_tx,
3370 .start = iwlagn_mac_start,
3371 .stop = iwlagn_mac_stop,
3372 .add_interface = iwl_mac_add_interface,
3373 .remove_interface = iwl_mac_remove_interface,
3374 .change_interface = iwl_mac_change_interface,
3375 .config = iwlagn_mac_config,
3376 .configure_filter = iwlagn_configure_filter,
3377 .set_key = iwlagn_mac_set_key,
3378 .update_tkip_key = iwlagn_mac_update_tkip_key,
3379 .conf_tx = iwl_mac_conf_tx,
3380 .bss_info_changed = iwlagn_bss_info_changed,
3381 .ampdu_action = iwlagn_mac_ampdu_action,
3382 .hw_scan = iwl_mac_hw_scan,
3383 .sta_notify = iwlagn_mac_sta_notify,
3384 .sta_add = iwlagn_mac_sta_add,
3385 .sta_remove = iwl_mac_sta_remove,
3386 .channel_switch = iwlagn_mac_channel_switch,
3387 .flush = iwlagn_mac_flush,
3388 .tx_last_beacon = iwl_mac_tx_last_beacon,
3389 .remain_on_channel = iwl_mac_remain_on_channel,
3390 .cancel_remain_on_channel = iwl_mac_cancel_remain_on_channel,
3391 .offchannel_tx = iwl_mac_offchannel_tx,
3392 .offchannel_tx_cancel_wait = iwl_mac_offchannel_tx_cancel_wait,
3393 .rssi_callback = iwl_mac_rssi_callback,
3394 CFG80211_TESTMODE_CMD(iwl_testmode_cmd)
3395 CFG80211_TESTMODE_DUMP(iwl_testmode_dump)
3398 static u32 iwl_hw_detect(struct iwl_priv *priv)
3400 return iwl_read32(priv, CSR_HW_REV);
3403 static int iwl_set_hw_params(struct iwl_priv *priv)
3405 priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
3406 priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
3407 if (iwlagn_mod_params.amsdu_size_8K)
3408 priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_8K);
3410 priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_4K);
3412 priv->hw_params.max_beacon_itrvl = IWL_MAX_UCODE_BEACON_INTERVAL;
3414 if (iwlagn_mod_params.disable_11n)
3415 priv->cfg->sku &= ~EEPROM_SKU_CAP_11N_ENABLE;
3417 /* Device-specific setup */
3418 return priv->cfg->ops->lib->set_hw_params(priv);
3421 static const u8 iwlagn_bss_ac_to_fifo[] = {
3428 static const u8 iwlagn_bss_ac_to_queue[] = {
3432 static const u8 iwlagn_pan_ac_to_fifo[] = {
3433 IWL_TX_FIFO_VO_IPAN,
3434 IWL_TX_FIFO_VI_IPAN,
3435 IWL_TX_FIFO_BE_IPAN,
3436 IWL_TX_FIFO_BK_IPAN,
3439 static const u8 iwlagn_pan_ac_to_queue[] = {
3443 /* This function both allocates and initializes hw and priv. */
3444 static struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg)
3446 struct iwl_priv *priv;
3447 /* mac80211 allocates memory for this device instance, including
3448 * space for this driver's private structure */
3449 struct ieee80211_hw *hw;
3451 hw = ieee80211_alloc_hw(sizeof(struct iwl_priv), &iwlagn_hw_ops);
3453 pr_err("%s: Can not allocate network device\n",
3465 static void iwl_init_context(struct iwl_priv *priv)
3470 * The default context is always valid,
3471 * more may be discovered when firmware
3474 priv->valid_contexts = BIT(IWL_RXON_CTX_BSS);
3476 for (i = 0; i < NUM_IWL_RXON_CTX; i++)
3477 priv->contexts[i].ctxid = i;
3479 priv->contexts[IWL_RXON_CTX_BSS].always_active = true;
3480 priv->contexts[IWL_RXON_CTX_BSS].is_active = true;
3481 priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON;
3482 priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING;
3483 priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC;
3484 priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM;
3485 priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID;
3486 priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY;
3487 priv->contexts[IWL_RXON_CTX_BSS].ac_to_fifo = iwlagn_bss_ac_to_fifo;
3488 priv->contexts[IWL_RXON_CTX_BSS].ac_to_queue = iwlagn_bss_ac_to_queue;
3489 priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes =
3490 BIT(NL80211_IFTYPE_ADHOC);
3491 priv->contexts[IWL_RXON_CTX_BSS].interface_modes =
3492 BIT(NL80211_IFTYPE_STATION);
3493 priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP;
3494 priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS;
3495 priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS;
3496 priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS;
3498 priv->contexts[IWL_RXON_CTX_PAN].rxon_cmd = REPLY_WIPAN_RXON;
3499 priv->contexts[IWL_RXON_CTX_PAN].rxon_timing_cmd =
3500 REPLY_WIPAN_RXON_TIMING;
3501 priv->contexts[IWL_RXON_CTX_PAN].rxon_assoc_cmd =
3502 REPLY_WIPAN_RXON_ASSOC;
3503 priv->contexts[IWL_RXON_CTX_PAN].qos_cmd = REPLY_WIPAN_QOS_PARAM;
3504 priv->contexts[IWL_RXON_CTX_PAN].ap_sta_id = IWL_AP_ID_PAN;
3505 priv->contexts[IWL_RXON_CTX_PAN].wep_key_cmd = REPLY_WIPAN_WEPKEY;
3506 priv->contexts[IWL_RXON_CTX_PAN].bcast_sta_id = IWLAGN_PAN_BCAST_ID;
3507 priv->contexts[IWL_RXON_CTX_PAN].station_flags = STA_FLG_PAN_STATION;
3508 priv->contexts[IWL_RXON_CTX_PAN].ac_to_fifo = iwlagn_pan_ac_to_fifo;
3509 priv->contexts[IWL_RXON_CTX_PAN].ac_to_queue = iwlagn_pan_ac_to_queue;
3510 priv->contexts[IWL_RXON_CTX_PAN].mcast_queue = IWL_IPAN_MCAST_QUEUE;
3511 priv->contexts[IWL_RXON_CTX_PAN].interface_modes =
3512 BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP);
3513 #ifdef CONFIG_IWL_P2P
3514 priv->contexts[IWL_RXON_CTX_PAN].interface_modes |=
3515 BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_P2P_GO);
3517 priv->contexts[IWL_RXON_CTX_PAN].ap_devtype = RXON_DEV_TYPE_CP;
3518 priv->contexts[IWL_RXON_CTX_PAN].station_devtype = RXON_DEV_TYPE_2STA;
3519 priv->contexts[IWL_RXON_CTX_PAN].unused_devtype = RXON_DEV_TYPE_P2P;
3521 BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
3524 int iwl_probe(void *bus_specific, struct iwl_bus_ops *bus_ops,
3525 struct iwl_cfg *cfg)
3528 struct iwl_priv *priv;
3529 struct ieee80211_hw *hw;
3533 /************************
3534 * 1. Allocating HW data
3535 ************************/
3536 hw = iwl_alloc_all(cfg);
3544 priv->bus.priv = priv;
3545 priv->bus.bus_specific = bus_specific;
3546 priv->bus.ops = bus_ops;
3547 priv->bus.irq = priv->bus.ops->get_irq(&priv->bus);
3548 priv->bus.ops->set_drv_data(&priv->bus, priv);
3549 priv->bus.dev = priv->bus.ops->get_dev(&priv->bus);
3551 iwl_trans_register(&priv->trans);
3553 /* At this point both hw and priv are allocated. */
3555 SET_IEEE80211_DEV(hw, priv->bus.dev);
3557 IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
3559 priv->inta_mask = CSR_INI_SET_MASK;
3561 /* is antenna coupling more than 35dB ? */
3562 priv->bt_ant_couple_ok =
3563 (iwlagn_ant_coupling > IWL_BT_ANTENNA_COUPLING_THRESHOLD) ?
3566 /* enable/disable bt channel inhibition */
3567 priv->bt_ch_announce = iwlagn_bt_ch_announce;
3568 IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n",
3569 (priv->bt_ch_announce) ? "On" : "Off");
3571 if (iwl_alloc_traffic_mem(priv))
3572 IWL_ERR(priv, "Not enough memory to generate traffic log\n");
3575 /* these spin locks will be used in apm_ops.init and EEPROM access
3576 * we should init now
3578 spin_lock_init(&priv->reg_lock);
3579 spin_lock_init(&priv->lock);
3582 * stop and reset the on-board processor just in case it is in a
3583 * strange state ... like being left stranded by a primary kernel
3584 * and this is now the kdump kernel trying to start up
3586 iwl_write32(priv, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
3588 /***********************
3589 * 3. Read REV register
3590 ***********************/
3591 hw_rev = iwl_hw_detect(priv);
3592 IWL_INFO(priv, "Detected %s, REV=0x%X\n",
3593 priv->cfg->name, hw_rev);
3595 if (iwl_prepare_card_hw(priv)) {
3597 IWL_WARN(priv, "Failed, HW not ready\n");
3598 goto out_free_traffic_mem;
3604 /* Read the EEPROM */
3605 err = iwl_eeprom_init(priv, hw_rev);
3607 IWL_ERR(priv, "Unable to init EEPROM\n");
3608 goto out_free_traffic_mem;
3610 err = iwl_eeprom_check_version(priv);
3612 goto out_free_eeprom;
3614 err = iwl_eeprom_check_sku(priv);
3616 goto out_free_eeprom;
3618 /* extract MAC Address */
3619 iwl_eeprom_get_mac(priv, priv->addresses[0].addr);
3620 IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr);
3621 priv->hw->wiphy->addresses = priv->addresses;
3622 priv->hw->wiphy->n_addresses = 1;
3623 num_mac = iwl_eeprom_query16(priv, EEPROM_NUM_MAC_ADDRESS);
3625 memcpy(priv->addresses[1].addr, priv->addresses[0].addr,
3627 priv->addresses[1].addr[5]++;
3628 priv->hw->wiphy->n_addresses++;
3631 /* initialize all valid contexts */
3632 iwl_init_context(priv);
3634 /************************
3635 * 5. Setup HW constants
3636 ************************/
3637 if (iwl_set_hw_params(priv)) {
3639 IWL_ERR(priv, "failed to set hw parameters\n");
3640 goto out_free_eeprom;
3643 /*******************
3645 *******************/
3647 err = iwl_init_drv(priv);
3649 goto out_free_eeprom;
3650 /* At this point both hw and priv are initialized. */
3652 /********************
3654 ********************/
3655 iwl_alloc_isr_ict(priv);
3657 err = request_irq(priv->bus.irq, iwl_isr_ict, IRQF_SHARED,
3660 IWL_ERR(priv, "Error allocating IRQ %d\n", priv->bus.irq);
3661 goto out_uninit_drv;
3664 iwl_setup_deferred_work(priv);
3665 iwl_setup_rx_handlers(priv);
3666 iwl_testmode_init(priv);
3668 /*********************************************
3669 * 8. Enable interrupts
3670 *********************************************/
3672 iwl_enable_rfkill_int(priv);
3674 /* If platform's RF_KILL switch is NOT set to KILL */
3675 if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
3676 clear_bit(STATUS_RF_KILL_HW, &priv->status);
3678 set_bit(STATUS_RF_KILL_HW, &priv->status);
3680 wiphy_rfkill_set_hw_state(priv->hw->wiphy,
3681 test_bit(STATUS_RF_KILL_HW, &priv->status));
3683 iwl_power_initialize(priv);
3684 iwl_tt_initialize(priv);
3686 init_completion(&priv->_agn.firmware_loading_complete);
3688 err = iwl_request_firmware(priv, true);
3690 goto out_destroy_workqueue;
3694 out_destroy_workqueue:
3695 destroy_workqueue(priv->workqueue);
3696 priv->workqueue = NULL;
3697 free_irq(priv->bus.irq, priv);
3698 iwl_free_isr_ict(priv);
3700 iwl_uninit_drv(priv);
3702 iwl_eeprom_free(priv);
3703 out_free_traffic_mem:
3704 iwl_free_traffic_mem(priv);
3705 ieee80211_free_hw(priv->hw);
3710 void __devexit iwl_remove(struct iwl_priv * priv)
3712 unsigned long flags;
3714 wait_for_completion(&priv->_agn.firmware_loading_complete);
3716 IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
3718 iwl_dbgfs_unregister(priv);
3719 sysfs_remove_group(&priv->bus.dev->kobj,
3720 &iwl_attribute_group);
3722 /* ieee80211_unregister_hw call wil cause iwl_mac_stop to
3723 * to be called and iwl_down since we are removing the device
3724 * we need to set STATUS_EXIT_PENDING bit.
3726 set_bit(STATUS_EXIT_PENDING, &priv->status);
3728 iwl_testmode_cleanup(priv);
3729 iwl_leds_exit(priv);
3731 if (priv->mac80211_registered) {
3732 ieee80211_unregister_hw(priv->hw);
3733 priv->mac80211_registered = 0;
3736 /* Reset to low power before unloading driver. */
3741 /* make sure we flush any pending irq or
3742 * tasklet for the driver
3744 spin_lock_irqsave(&priv->lock, flags);
3745 iwl_disable_interrupts(priv);
3746 spin_unlock_irqrestore(&priv->lock, flags);
3748 iwl_synchronize_irq(priv);
3750 iwl_dealloc_ucode(priv);
3752 trans_rx_free(priv);
3753 trans_tx_free(priv);
3755 iwl_eeprom_free(priv);
3758 /*netif_stop_queue(dev); */
3759 flush_workqueue(priv->workqueue);
3761 /* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
3762 * priv->workqueue... so we can't take down the workqueue
3764 destroy_workqueue(priv->workqueue);
3765 priv->workqueue = NULL;
3766 iwl_free_traffic_mem(priv);
3768 free_irq(priv->bus.irq, priv);
3769 priv->bus.ops->set_drv_data(&priv->bus, NULL);
3771 iwl_uninit_drv(priv);
3773 iwl_free_isr_ict(priv);
3775 dev_kfree_skb(priv->beacon_skb);
3777 ieee80211_free_hw(priv->hw);
3781 /*****************************************************************************
3783 * driver and module entry point
3785 *****************************************************************************/
3786 static int __init iwl_init(void)
3790 pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
3791 pr_info(DRV_COPYRIGHT "\n");
3793 ret = iwlagn_rate_control_register();
3795 pr_err("Unable to register rate control algorithm: %d\n", ret);
3799 ret = iwl_pci_register_driver();
3802 goto error_register;
3806 iwlagn_rate_control_unregister();
3810 static void __exit iwl_exit(void)
3812 iwl_pci_unregister_driver();
3813 iwlagn_rate_control_unregister();
3816 module_exit(iwl_exit);
3817 module_init(iwl_init);
3819 #ifdef CONFIG_IWLWIFI_DEBUG
3820 module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
3821 MODULE_PARM_DESC(debug, "debug output mask");
3824 module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO);
3825 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
3826 module_param_named(queues_num, iwlagn_mod_params.num_of_queues, int, S_IRUGO);
3827 MODULE_PARM_DESC(queues_num, "number of hw queues.");
3828 module_param_named(11n_disable, iwlagn_mod_params.disable_11n, int, S_IRUGO);
3829 MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
3830 module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K,
3832 MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
3833 module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO);
3834 MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
3836 module_param_named(ucode_alternative, iwlagn_wanted_ucode_alternative, int,
3838 MODULE_PARM_DESC(ucode_alternative,
3839 "specify ucode alternative to use from ucode file");
3841 module_param_named(antenna_coupling, iwlagn_ant_coupling, int, S_IRUGO);
3842 MODULE_PARM_DESC(antenna_coupling,
3843 "specify antenna coupling in dB (defualt: 0 dB)");
3845 module_param_named(bt_ch_inhibition, iwlagn_bt_ch_announce, bool, S_IRUGO);
3846 MODULE_PARM_DESC(bt_ch_inhibition,
3847 "Disable BT channel inhibition (default: enable)");
3849 module_param_named(plcp_check, iwlagn_mod_params.plcp_check, bool, S_IRUGO);
3850 MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])");
3852 module_param_named(ack_check, iwlagn_mod_params.ack_check, bool, S_IRUGO);
3853 MODULE_PARM_DESC(ack_check, "Check ack health (default: 0 [disabled])");
3855 module_param_named(wd_disable, iwlagn_mod_params.wd_disable, bool, S_IRUGO);
3856 MODULE_PARM_DESC(wd_disable,
3857 "Disable stuck queue watchdog timer (default: 0 [enabled])");
3860 * set bt_coex_active to true, uCode will do kill/defer
3861 * every time the priority line is asserted (BT is sending signals on the
3862 * priority line in the PCIx).
3863 * set bt_coex_active to false, uCode will ignore the BT activity and
3864 * perform the normal operation
3866 * User might experience transmit issue on some platform due to WiFi/BT
3867 * co-exist problem. The possible behaviors are:
3868 * Able to scan and finding all the available AP
3869 * Not able to associate with any AP
3870 * On those platforms, WiFi communication can be restored by set
3871 * "bt_coex_active" module parameter to "false"
3873 * default: bt_coex_active = true (BT_COEX_ENABLE)
3875 module_param_named(bt_coex_active, iwlagn_mod_params.bt_coex_active,
3877 MODULE_PARM_DESC(bt_coex_active, "enable wifi/bt co-exist (default: enable)");
3879 module_param_named(led_mode, iwlagn_mod_params.led_mode, int, S_IRUGO);
3880 MODULE_PARM_DESC(led_mode, "0=system default, "
3881 "1=On(RF On)/Off(RF Off), 2=blinking (default: 0)");
3883 module_param_named(power_save, iwlagn_mod_params.power_save,
3885 MODULE_PARM_DESC(power_save,
3886 "enable WiFi power management (default: disable)");
3888 module_param_named(power_level, iwlagn_mod_params.power_level,
3890 MODULE_PARM_DESC(power_level,
3891 "default power save level (range from 1 - 5, default: 1)");
3894 * For now, keep using power level 1 instead of automatically
3897 module_param_named(no_sleep_autoadjust, iwlagn_mod_params.no_sleep_autoadjust,
3899 MODULE_PARM_DESC(no_sleep_autoadjust,
3900 "don't automatically adjust sleep level "
3901 "according to maximum network latency (default: true)");