1 /******************************************************************************
3 * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of version 2 of the GNU General Public License as
7 * published by the Free Software Foundation.
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc.,
16 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
18 * The full GNU General Public License is included in this distribution in the
19 * file called LICENSE.
21 * Contact Information:
22 * Intel Linux Wireless <ilw@linux.intel.com>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 *****************************************************************************/
30 #include "iwl-agn-calib.h"
31 #include "iwl-trans.h"
32 #include "iwl-shared.h"
34 static int iwlagn_disable_bss(struct iwl_priv *priv,
35 struct iwl_rxon_context *ctx,
36 struct iwl_rxon_cmd *send)
38 __le32 old_filter = send->filter_flags;
41 send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
42 ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd,
43 CMD_SYNC, sizeof(*send), send);
45 send->filter_flags = old_filter;
48 IWL_DEBUG_QUIET_RFKILL(priv,
49 "Error clearing ASSOC_MSK on BSS (%d)\n", ret);
54 static int iwlagn_disable_pan(struct iwl_priv *priv,
55 struct iwl_rxon_context *ctx,
56 struct iwl_rxon_cmd *send)
58 struct iwl_notification_wait disable_wait;
59 __le32 old_filter = send->filter_flags;
60 u8 old_dev_type = send->dev_type;
63 iwl_init_notification_wait(priv->shrd, &disable_wait,
64 REPLY_WIPAN_DEACTIVATION_COMPLETE,
67 send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
68 send->dev_type = RXON_DEV_TYPE_P2P;
69 ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd,
70 CMD_SYNC, sizeof(*send), send);
72 send->filter_flags = old_filter;
73 send->dev_type = old_dev_type;
76 IWL_ERR(priv, "Error disabling PAN (%d)\n", ret);
77 iwl_remove_notification(priv->shrd, &disable_wait);
79 ret = iwl_wait_notification(priv->shrd, &disable_wait, HZ);
81 IWL_ERR(priv, "Timed out waiting for PAN disable\n");
87 static int iwlagn_disconn_pan(struct iwl_priv *priv,
88 struct iwl_rxon_context *ctx,
89 struct iwl_rxon_cmd *send)
91 __le32 old_filter = send->filter_flags;
94 send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
95 ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, CMD_SYNC,
98 send->filter_flags = old_filter;
103 static void iwlagn_update_qos(struct iwl_priv *priv,
104 struct iwl_rxon_context *ctx)
111 ctx->qos_data.def_qos_parm.qos_flags = 0;
113 if (ctx->qos_data.qos_active)
114 ctx->qos_data.def_qos_parm.qos_flags |=
115 QOS_PARAM_FLG_UPDATE_EDCA_MSK;
118 ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
120 IWL_DEBUG_INFO(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
121 ctx->qos_data.qos_active,
122 ctx->qos_data.def_qos_parm.qos_flags);
124 ret = iwl_dvm_send_cmd_pdu(priv, ctx->qos_cmd, CMD_SYNC,
125 sizeof(struct iwl_qosparam_cmd),
126 &ctx->qos_data.def_qos_parm);
128 IWL_DEBUG_QUIET_RFKILL(priv, "Failed to update QoS\n");
131 static int iwlagn_update_beacon(struct iwl_priv *priv,
132 struct ieee80211_vif *vif)
134 lockdep_assert_held(&priv->mutex);
136 dev_kfree_skb(priv->beacon_skb);
137 priv->beacon_skb = ieee80211_beacon_get(priv->hw, vif);
138 if (!priv->beacon_skb)
140 return iwlagn_send_beacon_cmd(priv);
143 static int iwlagn_send_rxon_assoc(struct iwl_priv *priv,
144 struct iwl_rxon_context *ctx)
147 struct iwl_rxon_assoc_cmd rxon_assoc;
148 const struct iwl_rxon_cmd *rxon1 = &ctx->staging;
149 const struct iwl_rxon_cmd *rxon2 = &ctx->active;
151 if ((rxon1->flags == rxon2->flags) &&
152 (rxon1->filter_flags == rxon2->filter_flags) &&
153 (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
154 (rxon1->ofdm_ht_single_stream_basic_rates ==
155 rxon2->ofdm_ht_single_stream_basic_rates) &&
156 (rxon1->ofdm_ht_dual_stream_basic_rates ==
157 rxon2->ofdm_ht_dual_stream_basic_rates) &&
158 (rxon1->ofdm_ht_triple_stream_basic_rates ==
159 rxon2->ofdm_ht_triple_stream_basic_rates) &&
160 (rxon1->acquisition_data == rxon2->acquisition_data) &&
161 (rxon1->rx_chain == rxon2->rx_chain) &&
162 (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
163 IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC. Not resending.\n");
167 rxon_assoc.flags = ctx->staging.flags;
168 rxon_assoc.filter_flags = ctx->staging.filter_flags;
169 rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
170 rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
171 rxon_assoc.reserved1 = 0;
172 rxon_assoc.reserved2 = 0;
173 rxon_assoc.reserved3 = 0;
174 rxon_assoc.ofdm_ht_single_stream_basic_rates =
175 ctx->staging.ofdm_ht_single_stream_basic_rates;
176 rxon_assoc.ofdm_ht_dual_stream_basic_rates =
177 ctx->staging.ofdm_ht_dual_stream_basic_rates;
178 rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain;
179 rxon_assoc.ofdm_ht_triple_stream_basic_rates =
180 ctx->staging.ofdm_ht_triple_stream_basic_rates;
181 rxon_assoc.acquisition_data = ctx->staging.acquisition_data;
183 ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_assoc_cmd,
184 CMD_ASYNC, sizeof(rxon_assoc), &rxon_assoc);
188 static int iwlagn_rxon_disconn(struct iwl_priv *priv,
189 struct iwl_rxon_context *ctx)
192 struct iwl_rxon_cmd *active = (void *)&ctx->active;
194 if (ctx->ctxid == IWL_RXON_CTX_BSS) {
195 ret = iwlagn_disable_bss(priv, ctx, &ctx->staging);
197 ret = iwlagn_disable_pan(priv, ctx, &ctx->staging);
201 ret = iwl_send_rxon_timing(priv, ctx);
203 IWL_ERR(priv, "Failed to send timing (%d)!\n", ret);
206 ret = iwlagn_disconn_pan(priv, ctx, &ctx->staging);
213 * Un-assoc RXON clears the station table and WEP
214 * keys, so we have to restore those afterwards.
216 iwl_clear_ucode_stations(priv, ctx);
217 /* update -- might need P2P now */
218 iwl_update_bcast_station(priv, ctx);
219 iwl_restore_stations(priv, ctx);
220 ret = iwl_restore_default_wep_keys(priv, ctx);
222 IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
226 memcpy(active, &ctx->staging, sizeof(*active));
230 static int iwlagn_rxon_connect(struct iwl_priv *priv,
231 struct iwl_rxon_context *ctx)
234 struct iwl_rxon_cmd *active = (void *)&ctx->active;
236 /* RXON timing must be before associated RXON */
237 if (ctx->ctxid == IWL_RXON_CTX_BSS) {
238 ret = iwl_send_rxon_timing(priv, ctx);
240 IWL_ERR(priv, "Failed to send timing (%d)!\n", ret);
244 /* QoS info may be cleared by previous un-assoc RXON */
245 iwlagn_update_qos(priv, ctx);
248 * We'll run into this code path when beaconing is
249 * enabled, but then we also need to send the beacon
252 if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) {
253 ret = iwlagn_update_beacon(priv, ctx->vif);
256 "Error sending required beacon (%d)!\n",
262 priv->start_calib = 0;
264 * Apply the new configuration.
266 * Associated RXON doesn't clear the station table in uCode,
267 * so we don't need to restore stations etc. after this.
269 ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, CMD_SYNC,
270 sizeof(struct iwl_rxon_cmd), &ctx->staging);
272 IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
275 memcpy(active, &ctx->staging, sizeof(*active));
277 /* IBSS beacon needs to be sent after setting assoc */
278 if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC))
279 if (iwlagn_update_beacon(priv, ctx->vif))
280 IWL_ERR(priv, "Error sending IBSS beacon\n");
281 iwl_init_sensitivity(priv);
284 * If we issue a new RXON command which required a tune then
285 * we must send a new TXPOWER command or we won't be able to
288 * It's expected we set power here if channel is changing.
290 ret = iwl_set_tx_power(priv, priv->tx_power_next, true);
292 IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
296 if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION &&
297 cfg(priv)->ht_params && cfg(priv)->ht_params->smps_mode)
298 ieee80211_request_smps(ctx->vif,
299 cfg(priv)->ht_params->smps_mode);
304 int iwlagn_set_pan_params(struct iwl_priv *priv)
306 struct iwl_wipan_params_cmd cmd;
307 struct iwl_rxon_context *ctx_bss, *ctx_pan;
308 int slot0 = 300, slot1 = 0;
311 if (priv->shrd->valid_contexts == BIT(IWL_RXON_CTX_BSS))
314 BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
316 lockdep_assert_held(&priv->mutex);
318 ctx_bss = &priv->contexts[IWL_RXON_CTX_BSS];
319 ctx_pan = &priv->contexts[IWL_RXON_CTX_PAN];
322 * If the PAN context is inactive, then we don't need
323 * to update the PAN parameters, the last thing we'll
324 * have done before it goes inactive is making the PAN
325 * parameters be WLAN-only.
327 if (!ctx_pan->is_active)
330 memset(&cmd, 0, sizeof(cmd));
332 /* only 2 slots are currently allowed */
335 cmd.slots[0].type = 0; /* BSS */
336 cmd.slots[1].type = 1; /* PAN */
338 if (priv->hw_roc_setup) {
339 /* both contexts must be used for this to happen */
340 slot1 = IWL_MIN_SLOT_TIME;
342 } else if (ctx_bss->vif && ctx_pan->vif) {
343 int bcnint = ctx_pan->beacon_int;
344 int dtim = ctx_pan->vif->bss_conf.dtim_period ?: 1;
346 /* should be set, but seems unused?? */
347 cmd.flags |= cpu_to_le16(IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE);
349 if (ctx_pan->vif->type == NL80211_IFTYPE_AP &&
351 bcnint != ctx_bss->beacon_int) {
353 "beacon intervals don't match (%d, %d)\n",
354 ctx_bss->beacon_int, ctx_pan->beacon_int);
356 bcnint = max_t(int, bcnint,
357 ctx_bss->beacon_int);
359 bcnint = DEFAULT_BEACON_INTERVAL;
361 slot1 = bcnint - slot0;
363 if (test_bit(STATUS_SCAN_HW, &priv->shrd->status) ||
364 (!ctx_bss->vif->bss_conf.idle &&
365 !ctx_bss->vif->bss_conf.assoc)) {
366 slot0 = dtim * bcnint * 3 - IWL_MIN_SLOT_TIME;
367 slot1 = IWL_MIN_SLOT_TIME;
368 } else if (!ctx_pan->vif->bss_conf.idle &&
369 !ctx_pan->vif->bss_conf.assoc) {
370 slot1 = dtim * bcnint * 3 - IWL_MIN_SLOT_TIME;
371 slot0 = IWL_MIN_SLOT_TIME;
373 } else if (ctx_pan->vif) {
375 slot1 = max_t(int, 1, ctx_pan->vif->bss_conf.dtim_period) *
377 slot1 = max_t(int, DEFAULT_BEACON_INTERVAL, slot1);
379 if (test_bit(STATUS_SCAN_HW, &priv->shrd->status)) {
380 slot0 = slot1 * 3 - IWL_MIN_SLOT_TIME;
381 slot1 = IWL_MIN_SLOT_TIME;
385 cmd.slots[0].width = cpu_to_le16(slot0);
386 cmd.slots[1].width = cpu_to_le16(slot1);
388 ret = iwl_dvm_send_cmd_pdu(priv, REPLY_WIPAN_PARAMS, CMD_SYNC,
391 IWL_ERR(priv, "Error setting PAN parameters (%d)\n", ret);
397 * iwlagn_commit_rxon - commit staging_rxon to hardware
399 * The RXON command in staging_rxon is committed to the hardware and
400 * the active_rxon structure is updated with the new data. This
401 * function correctly transitions out of the RXON_ASSOC_MSK state if
402 * a HW tune is required based on the RXON structure changes.
404 * The connect/disconnect flow should be as the following:
406 * 1. make sure send RXON command with association bit unset if not connect
407 * this should include the channel and the band for the candidate
409 * 2. Add Station before RXON association with the AP
410 * 3. RXON_timing has to send before RXON for connection
411 * 4. full RXON command - associated bit set
412 * 5. use RXON_ASSOC command to update any flags changes
414 int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
416 /* cast away the const for active_rxon in this function */
417 struct iwl_rxon_cmd *active = (void *)&ctx->active;
418 bool new_assoc = !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
421 lockdep_assert_held(&priv->mutex);
423 if (!iwl_is_alive(priv->shrd))
426 /* This function hardcodes a bunch of dual-mode assumptions */
427 BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
432 /* always get timestamp with Rx frame */
433 ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
436 * force CTS-to-self frames protection if RTS-CTS is not preferred
437 * one aggregation protection method
439 if (!hw_params(priv).use_rts_for_aggregation)
440 ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
442 if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
443 !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
444 ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
446 ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
448 iwl_print_rx_config_cmd(priv, ctx->ctxid);
449 ret = iwl_check_rxon_cmd(priv, ctx);
451 IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
456 * receive commit_rxon request
457 * abort any previous channel switch if still in process
459 if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->shrd->status) &&
460 (priv->switch_channel != ctx->staging.channel)) {
461 IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
462 le16_to_cpu(priv->switch_channel));
463 iwl_chswitch_done(priv, false);
467 * If we don't need to send a full RXON, we can use
468 * iwl_rxon_assoc_cmd which is used to reconfigure filter
469 * and other flags for the current radio configuration.
471 if (!iwl_full_rxon_required(priv, ctx)) {
472 ret = iwlagn_send_rxon_assoc(priv, ctx);
474 IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
478 memcpy(active, &ctx->staging, sizeof(*active));
480 * We do not commit tx power settings while channel changing,
481 * do it now if after settings changed.
483 iwl_set_tx_power(priv, priv->tx_power_next, false);
485 /* make sure we are in the right PS state */
486 iwl_power_update_mode(priv, true);
491 iwl_set_rxon_hwcrypto(priv, ctx, !iwlagn_mod_params.sw_crypto);
494 "Going to commit RXON\n"
495 " * with%s RXON_FILTER_ASSOC_MSK\n"
498 (new_assoc ? "" : "out"),
499 le16_to_cpu(ctx->staging.channel),
500 ctx->staging.bssid_addr);
503 * Always clear associated first, but with the correct config.
504 * This is required as for example station addition for the
505 * AP station must be done after the BSSID is set to correctly
506 * set up filters in the device.
508 ret = iwlagn_rxon_disconn(priv, ctx);
512 ret = iwlagn_set_pan_params(priv);
517 return iwlagn_rxon_connect(priv, ctx);
522 void iwlagn_config_ht40(struct ieee80211_conf *conf,
523 struct iwl_rxon_context *ctx)
525 if (conf_is_ht40_minus(conf)) {
526 ctx->ht.extension_chan_offset =
527 IEEE80211_HT_PARAM_CHA_SEC_BELOW;
528 ctx->ht.is_40mhz = true;
529 } else if (conf_is_ht40_plus(conf)) {
530 ctx->ht.extension_chan_offset =
531 IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
532 ctx->ht.is_40mhz = true;
534 ctx->ht.extension_chan_offset =
535 IEEE80211_HT_PARAM_CHA_SEC_NONE;
536 ctx->ht.is_40mhz = false;
540 int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed)
542 struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
543 struct iwl_rxon_context *ctx;
544 struct ieee80211_conf *conf = &hw->conf;
545 struct ieee80211_channel *channel = conf->channel;
546 const struct iwl_channel_info *ch_info;
549 IWL_DEBUG_MAC80211(priv, "enter: changed %#x", changed);
551 mutex_lock(&priv->mutex);
553 if (unlikely(test_bit(STATUS_SCANNING, &priv->shrd->status))) {
554 IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
558 if (!iwl_is_ready(priv->shrd)) {
559 IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
563 if (changed & (IEEE80211_CONF_CHANGE_SMPS |
564 IEEE80211_CONF_CHANGE_CHANNEL)) {
565 /* mac80211 uses static for non-HT which is what we want */
566 priv->current_ht_config.smps = conf->smps_mode;
569 * Recalculate chain counts.
571 * If monitor mode is enabled then mac80211 will
572 * set up the SM PS mode to OFF if an HT channel is
575 for_each_context(priv, ctx)
576 iwlagn_set_rxon_chain(priv, ctx);
579 if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
580 ch_info = iwl_get_channel_info(priv, channel->band,
582 if (!is_channel_valid(ch_info)) {
583 IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
588 for_each_context(priv, ctx) {
589 /* Configure HT40 channels */
590 if (ctx->ht.enabled != conf_is_ht(conf))
591 ctx->ht.enabled = conf_is_ht(conf);
593 if (ctx->ht.enabled) {
594 /* if HT40 is used, it should not change
595 * after associated except channel switch */
596 if (!ctx->ht.is_40mhz ||
597 !iwl_is_associated_ctx(ctx))
598 iwlagn_config_ht40(conf, ctx);
600 ctx->ht.is_40mhz = false;
603 * Default to no protection. Protection mode will
604 * later be set from BSS config in iwl_ht_conf
606 ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
608 /* if we are switching from ht to 2.4 clear flags
609 * from any ht related info since 2.4 does not
611 if (le16_to_cpu(ctx->staging.channel) !=
613 ctx->staging.flags = 0;
615 iwl_set_rxon_channel(priv, channel, ctx);
616 iwl_set_rxon_ht(priv, &priv->current_ht_config);
618 iwl_set_flags_for_band(priv, ctx, channel->band,
622 iwl_update_bcast_stations(priv);
625 * The list of supported rates and rate mask can be different
626 * for each band; since the band may have changed, reset
627 * the rate mask to what mac80211 lists.
632 if (changed & (IEEE80211_CONF_CHANGE_PS |
633 IEEE80211_CONF_CHANGE_IDLE)) {
634 ret = iwl_power_update_mode(priv, false);
636 IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
639 if (changed & IEEE80211_CONF_CHANGE_POWER) {
640 IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
641 priv->tx_power_user_lmt, conf->power_level);
643 iwl_set_tx_power(priv, conf->power_level, false);
646 for_each_context(priv, ctx) {
647 if (!memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
649 iwlagn_commit_rxon(priv, ctx);
652 mutex_unlock(&priv->mutex);
653 IWL_DEBUG_MAC80211(priv, "leave\n");
658 static void iwlagn_check_needed_chains(struct iwl_priv *priv,
659 struct iwl_rxon_context *ctx,
660 struct ieee80211_bss_conf *bss_conf)
662 struct ieee80211_vif *vif = ctx->vif;
663 struct iwl_rxon_context *tmp;
664 struct ieee80211_sta *sta;
665 struct iwl_ht_config *ht_conf = &priv->current_ht_config;
666 struct ieee80211_sta_ht_cap *ht_cap;
669 lockdep_assert_held(&priv->mutex);
672 case NL80211_IFTYPE_STATION:
674 sta = ieee80211_find_sta(vif, bss_conf->bssid);
677 * If at all, this can only happen through a race
678 * when the AP disconnects us while we're still
679 * setting up the connection, in that case mac80211
680 * will soon tell us about that.
682 need_multiple = false;
687 ht_cap = &sta->ht_cap;
689 need_multiple = true;
692 * If the peer advertises no support for receiving 2 and 3
693 * stream MCS rates, it can't be transmitting them either.
695 if (ht_cap->mcs.rx_mask[1] == 0 &&
696 ht_cap->mcs.rx_mask[2] == 0) {
697 need_multiple = false;
698 } else if (!(ht_cap->mcs.tx_params &
699 IEEE80211_HT_MCS_TX_DEFINED)) {
700 /* If it can't TX MCS at all ... */
701 need_multiple = false;
702 } else if (ht_cap->mcs.tx_params &
703 IEEE80211_HT_MCS_TX_RX_DIFF) {
707 * But if it can receive them, it might still not
708 * be able to transmit them, which is what we need
709 * to check here -- so check the number of streams
710 * it advertises for TX (if different from RX).
713 maxstreams = (ht_cap->mcs.tx_params &
714 IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK);
716 IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
720 need_multiple = false;
725 case NL80211_IFTYPE_ADHOC:
727 need_multiple = false;
731 need_multiple = true;
735 ctx->ht_need_multiple_chains = need_multiple;
737 if (!need_multiple) {
738 /* check all contexts */
739 for_each_context(priv, tmp) {
742 if (tmp->ht_need_multiple_chains) {
743 need_multiple = true;
749 ht_conf->single_chain_sufficient = !need_multiple;
752 static void iwlagn_chain_noise_reset(struct iwl_priv *priv)
754 struct iwl_chain_noise_data *data = &priv->chain_noise_data;
757 if ((data->state == IWL_CHAIN_NOISE_ALIVE) &&
758 iwl_is_any_associated(priv)) {
759 struct iwl_calib_chain_noise_reset_cmd cmd;
761 /* clear data for chain noise calibration algorithm */
762 data->chain_noise_a = 0;
763 data->chain_noise_b = 0;
764 data->chain_noise_c = 0;
765 data->chain_signal_a = 0;
766 data->chain_signal_b = 0;
767 data->chain_signal_c = 0;
768 data->beacon_count = 0;
770 memset(&cmd, 0, sizeof(cmd));
771 iwl_set_calib_hdr(&cmd.hdr,
772 priv->phy_calib_chain_noise_reset_cmd);
773 ret = iwl_dvm_send_cmd_pdu(priv,
774 REPLY_PHY_CALIBRATION_CMD,
775 CMD_SYNC, sizeof(cmd), &cmd);
778 "Could not send REPLY_PHY_CALIBRATION_CMD\n");
779 data->state = IWL_CHAIN_NOISE_ACCUMULATE;
780 IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n");
784 void iwlagn_bss_info_changed(struct ieee80211_hw *hw,
785 struct ieee80211_vif *vif,
786 struct ieee80211_bss_conf *bss_conf,
789 struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
790 struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
794 mutex_lock(&priv->mutex);
796 if (unlikely(!iwl_is_ready(priv->shrd))) {
797 IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
798 mutex_unlock(&priv->mutex);
802 if (unlikely(!ctx->vif)) {
803 IWL_DEBUG_MAC80211(priv, "leave - vif is NULL\n");
804 mutex_unlock(&priv->mutex);
808 if (changes & BSS_CHANGED_BEACON_INT)
811 if (changes & BSS_CHANGED_QOS) {
812 ctx->qos_data.qos_active = bss_conf->qos;
813 iwlagn_update_qos(priv, ctx);
816 ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
817 if (vif->bss_conf.use_short_preamble)
818 ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
820 ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
822 if (changes & BSS_CHANGED_ASSOC) {
823 if (bss_conf->assoc) {
824 priv->timestamp = bss_conf->timestamp;
825 ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
828 * If we disassociate while there are pending
829 * frames, just wake up the queues and let the
830 * frames "escape" ... This shouldn't really
831 * be happening to start with, but we should
832 * not get stuck in this case either since it
833 * can happen if userspace gets confused.
835 if (ctx->last_tx_rejected) {
836 ctx->last_tx_rejected = false;
837 iwl_trans_wake_any_queue(trans(priv),
839 "Disassoc: flush queue");
841 ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
843 if (ctx->ctxid == IWL_RXON_CTX_BSS)
844 priv->have_rekey_data = false;
847 iwlagn_bt_coex_rssi_monitor(priv);
850 if (ctx->ht.enabled) {
851 ctx->ht.protection = bss_conf->ht_operation_mode &
852 IEEE80211_HT_OP_MODE_PROTECTION;
853 ctx->ht.non_gf_sta_present = !!(bss_conf->ht_operation_mode &
854 IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
855 iwlagn_check_needed_chains(priv, ctx, bss_conf);
856 iwl_set_rxon_ht(priv, &priv->current_ht_config);
859 iwlagn_set_rxon_chain(priv, ctx);
861 if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
862 ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK;
864 ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
866 if (bss_conf->use_cts_prot)
867 ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
869 ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
871 memcpy(ctx->staging.bssid_addr, bss_conf->bssid, ETH_ALEN);
873 if (vif->type == NL80211_IFTYPE_AP ||
874 vif->type == NL80211_IFTYPE_ADHOC) {
875 if (vif->bss_conf.enable_beacon) {
876 ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
877 priv->beacon_ctx = ctx;
879 ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
880 priv->beacon_ctx = NULL;
885 * If the ucode decides to do beacon filtering before
886 * association, it will lose beacons that are needed
887 * before sending frames out on passive channels. This
888 * causes association failures on those channels. Enable
889 * receiving beacons in such cases.
892 if (vif->type == NL80211_IFTYPE_STATION) {
893 if (!bss_conf->assoc)
894 ctx->staging.filter_flags |= RXON_FILTER_BCON_AWARE_MSK;
896 ctx->staging.filter_flags &=
897 ~RXON_FILTER_BCON_AWARE_MSK;
900 if (force || memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
901 iwlagn_commit_rxon(priv, ctx);
903 if (changes & BSS_CHANGED_ASSOC && bss_conf->assoc) {
905 * The chain noise calibration will enable PM upon
906 * completion. If calibration has already been run
907 * then we need to enable power management here.
909 if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
910 iwl_power_update_mode(priv, false);
912 /* Enable RX differential gain and sensitivity calibrations */
913 if (!priv->disable_chain_noise_cal)
914 iwlagn_chain_noise_reset(priv);
915 priv->start_calib = 1;
918 if (changes & BSS_CHANGED_IBSS) {
919 ret = iwlagn_manage_ibss_station(priv, vif,
920 bss_conf->ibss_joined);
922 IWL_ERR(priv, "failed to %s IBSS station %pM\n",
923 bss_conf->ibss_joined ? "add" : "remove",
927 if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_ADHOC &&
929 if (iwlagn_update_beacon(priv, vif))
930 IWL_ERR(priv, "Error sending IBSS beacon\n");
933 mutex_unlock(&priv->mutex);
936 void iwlagn_post_scan(struct iwl_priv *priv)
938 struct iwl_rxon_context *ctx;
941 * We do not commit power settings while scan is pending,
942 * do it now if the settings changed.
944 iwl_power_set_mode(priv, &priv->power_data.sleep_cmd_next, false);
945 iwl_set_tx_power(priv, priv->tx_power_next, false);
948 * Since setting the RXON may have been deferred while
949 * performing the scan, fire one off if needed
951 for_each_context(priv, ctx)
952 if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
953 iwlagn_commit_rxon(priv, ctx);
955 iwlagn_set_pan_params(priv);