drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c

   1 /*
   2  * Copyright (c) 2010 Broadcom Corporation
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  11  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  13  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  14  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  */
  16
  17 #include <linux/types.h>
  18 #include <linux/kernel.h>
  19 #include <linux/kthread.h>
  20 #include <linux/printk.h>
  21 #include <linux/pci_ids.h>
  22 #include <linux/netdevice.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/sched.h>
  25 #include <linux/mmc/sdio.h>
  26 #include <linux/mmc/sdio_func.h>
  27 #include <linux/mmc/card.h>
  28 #include <linux/semaphore.h>
  29 #include <linux/firmware.h>
  30 #include <linux/module.h>
  31 #include <linux/bcma/bcma.h>
  32 #include <asm/unaligned.h>
  33 #include <defs.h>
  34 #include <brcmu_wifi.h>
  35 #include <brcmu_utils.h>
  36 #include <brcm_hw_ids.h>
  37 #include <soc.h>
  38 #include "sdio_host.h"
  39 #include "sdio_chip.h"
  40
  41 #define DCMD_RESP_TIMEOUT  2000 /* In milli second */
  42
  43 #ifdef BCMDBG
  44
  45 #define BRCMF_TRAP_INFO_SIZE    80
  46
  47 #define CBUF_LEN        (128)
  48
  49 struct rte_log_le {
  50         __le32 buf;             /* Can't be pointer on (64-bit) hosts */
  51         __le32 buf_size;
  52         __le32 idx;
  53         char *_buf_compat;      /* Redundant pointer for backward compat. */
  54 };
  55
  56 struct rte_console {
  57         /* Virtual UART
  58          * When there is no UART (e.g. Quickturn),
  59          * the host should write a complete
  60          * input line directly into cbuf and then write
  61          * the length into vcons_in.
  62          * This may also be used when there is a real UART
  63          * (at risk of conflicting with
  64          * the real UART).  vcons_out is currently unused.
  65          */
  66         uint vcons_in;
  67         uint vcons_out;
  68
  69         /* Output (logging) buffer
  70          * Console output is written to a ring buffer log_buf at index log_idx.
  71          * The host may read the output when it sees log_idx advance.
  72          * Output will be lost if the output wraps around faster than the host
  73          * polls.
  74          */
  75         struct rte_log_le log_le;
  76
  77         /* Console input line buffer
  78          * Characters are read one at a time into cbuf
  79          * until <CR> is received, then
  80          * the buffer is processed as a command line.
  81          * Also used for virtual UART.
  82          */
  83         uint cbuf_idx;
  84         char cbuf[CBUF_LEN];
  85 };
  86
  87 #endif                          /* BCMDBG */
  88 #include <chipcommon.h>
  89
  90 #include "dhd.h"
  91 #include "dhd_bus.h"
  92 #include "dhd_proto.h"
  93 #include "dhd_dbg.h"
  94 #include <bcmchip.h>
  95
  96 #define TXQLEN          2048    /* bulk tx queue length */
  97 #define TXHI            (TXQLEN - 256)  /* turn on flow control above TXHI */
  98 #define TXLOW           (TXHI - 256)    /* turn off flow control below TXLOW */
  99 #define PRIOMASK        7
 100
 101 #define TXRETRIES       2       /* # of retries for tx frames */
 102
 103 #define BRCMF_RXBOUND   50      /* Default for max rx frames in
 104                                  one scheduling */
 105
 106 #define BRCMF_TXBOUND   20      /* Default for max tx frames in
 107                                  one scheduling */
 108
 109 #define BRCMF_TXMINMAX  1       /* Max tx frames if rx still pending */
 110
 111 #define MEMBLOCK        2048    /* Block size used for downloading
 112                                  of dongle image */
 113 #define MAX_DATA_BUF    (32 * 1024)     /* Must be large enough to hold
 114                                  biggest possible glom */
 115
 116 #define BRCMF_FIRSTREAD (1 << 6)
 117
 118
 119 /* SBSDIO_DEVICE_CTL */
 120
 121 /* 1: device will assert busy signal when receiving CMD53 */
 122 #define SBSDIO_DEVCTL_SETBUSY           0x01
 123 /* 1: assertion of sdio interrupt is synchronous to the sdio clock */
 124 #define SBSDIO_DEVCTL_SPI_INTR_SYNC     0x02
 125 /* 1: mask all interrupts to host except the chipActive (rev 8) */
 126 #define SBSDIO_DEVCTL_CA_INT_ONLY       0x04
 127 /* 1: isolate internal sdio signals, put external pads in tri-state; requires
 128  * sdio bus power cycle to clear (rev 9) */
 129 #define SBSDIO_DEVCTL_PADS_ISO          0x08
 130 /* Force SD->SB reset mapping (rev 11) */
 131 #define SBSDIO_DEVCTL_SB_RST_CTL        0x30
 132 /*   Determined by CoreControl bit */
 133 #define SBSDIO_DEVCTL_RST_CORECTL       0x00
 134 /*   Force backplane reset */
 135 #define SBSDIO_DEVCTL_RST_BPRESET       0x10
 136 /*   Force no backplane reset */
 137 #define SBSDIO_DEVCTL_RST_NOBPRESET     0x20
 138
 139 /* direct(mapped) cis space */
 140
 141 /* MAPPED common CIS address */
 142 #define SBSDIO_CIS_BASE_COMMON          0x1000
 143 /* maximum bytes in one CIS */
 144 #define SBSDIO_CIS_SIZE_LIMIT           0x200
 145 /* cis offset addr is < 17 bits */
 146 #define SBSDIO_CIS_OFT_ADDR_MASK        0x1FFFF
 147
 148 /* manfid tuple length, include tuple, link bytes */
 149 #define SBSDIO_CIS_MANFID_TUPLE_LEN     6
 150
 151 /* intstatus */
 152 #define I_SMB_SW0       (1 << 0)        /* To SB Mail S/W interrupt 0 */
 153 #define I_SMB_SW1       (1 << 1)        /* To SB Mail S/W interrupt 1 */
 154 #define I_SMB_SW2       (1 << 2)        /* To SB Mail S/W interrupt 2 */
 155 #define I_SMB_SW3       (1 << 3)        /* To SB Mail S/W interrupt 3 */
 156 #define I_SMB_SW_MASK   0x0000000f      /* To SB Mail S/W interrupts mask */
 157 #define I_SMB_SW_SHIFT  0       /* To SB Mail S/W interrupts shift */
 158 #define I_HMB_SW0       (1 << 4)        /* To Host Mail S/W interrupt 0 */
 159 #define I_HMB_SW1       (1 << 5)        /* To Host Mail S/W interrupt 1 */
 160 #define I_HMB_SW2       (1 << 6)        /* To Host Mail S/W interrupt 2 */
 161 #define I_HMB_SW3       (1 << 7)        /* To Host Mail S/W interrupt 3 */
 162 #define I_HMB_SW_MASK   0x000000f0      /* To Host Mail S/W interrupts mask */
 163 #define I_HMB_SW_SHIFT  4       /* To Host Mail S/W interrupts shift */
 164 #define I_WR_OOSYNC     (1 << 8)        /* Write Frame Out Of Sync */
 165 #define I_RD_OOSYNC     (1 << 9)        /* Read Frame Out Of Sync */
 166 #define I_PC            (1 << 10)       /* descriptor error */
 167 #define I_PD            (1 << 11)       /* data error */
 168 #define I_DE            (1 << 12)       /* Descriptor protocol Error */
 169 #define I_RU            (1 << 13)       /* Receive descriptor Underflow */
 170 #define I_RO            (1 << 14)       /* Receive fifo Overflow */
 171 #define I_XU            (1 << 15)       /* Transmit fifo Underflow */
 172 #define I_RI            (1 << 16)       /* Receive Interrupt */
 173 #define I_BUSPWR        (1 << 17)       /* SDIO Bus Power Change (rev 9) */
 174 #define I_XMTDATA_AVAIL (1 << 23)       /* bits in fifo */
 175 #define I_XI            (1 << 24)       /* Transmit Interrupt */
 176 #define I_RF_TERM       (1 << 25)       /* Read Frame Terminate */
 177 #define I_WF_TERM       (1 << 26)       /* Write Frame Terminate */
 178 #define I_PCMCIA_XU     (1 << 27)       /* PCMCIA Transmit FIFO Underflow */
 179 #define I_SBINT         (1 << 28)       /* sbintstatus Interrupt */
 180 #define I_CHIPACTIVE    (1 << 29)       /* chip from doze to active state */
 181 #define I_SRESET        (1 << 30)       /* CCCR RES interrupt */
 182 #define I_IOE2          (1U << 31)      /* CCCR IOE2 Bit Changed */
 183 #define I_ERRORS        (I_PC | I_PD | I_DE | I_RU | I_RO | I_XU)
 184 #define I_DMA           (I_RI | I_XI | I_ERRORS)
 185
 186 /* corecontrol */
 187 #define CC_CISRDY               (1 << 0)        /* CIS Ready */
 188 #define CC_BPRESEN              (1 << 1)        /* CCCR RES signal */
 189 #define CC_F2RDY                (1 << 2)        /* set CCCR IOR2 bit */
 190 #define CC_CLRPADSISO           (1 << 3)        /* clear SDIO pads isolation */
 191 #define CC_XMTDATAAVAIL_MODE    (1 << 4)
 192 #define CC_XMTDATAAVAIL_CTRL    (1 << 5)
 193
 194 /* SDA_FRAMECTRL */
 195 #define SFC_RF_TERM     (1 << 0)        /* Read Frame Terminate */
 196 #define SFC_WF_TERM     (1 << 1)        /* Write Frame Terminate */
 197 #define SFC_CRC4WOOS    (1 << 2)        /* CRC error for write out of sync */
 198 #define SFC_ABORTALL    (1 << 3)        /* Abort all in-progress frames */
 199
 200 /* HW frame tag */
 201 #define SDPCM_FRAMETAG_LEN      4       /* 2 bytes len, 2 bytes check val */
 202
 203 /* Total length of frame header for dongle protocol */
 204 #define SDPCM_HDRLEN    (SDPCM_FRAMETAG_LEN + SDPCM_SWHEADER_LEN)
 205 #define SDPCM_RESERVE   (SDPCM_HDRLEN + BRCMF_SDALIGN)
 206
 207 /*
 208  * Software allocation of To SB Mailbox resources
 209  */
 210
 211 /* tosbmailbox bits corresponding to intstatus bits */
 212 #define SMB_NAK         (1 << 0)        /* Frame NAK */
 213 #define SMB_INT_ACK     (1 << 1)        /* Host Interrupt ACK */
 214 #define SMB_USE_OOB     (1 << 2)        /* Use OOB Wakeup */
 215 #define SMB_DEV_INT     (1 << 3)        /* Miscellaneous Interrupt */
 216
 217 /* tosbmailboxdata */
 218 #define SMB_DATA_VERSION_SHIFT  16      /* host protocol version */
 219
 220 /*
 221  * Software allocation of To Host Mailbox resources
 222  */
 223
 224 /* intstatus bits */
 225 #define I_HMB_FC_STATE  I_HMB_SW0       /* Flow Control State */
 226 #define I_HMB_FC_CHANGE I_HMB_SW1       /* Flow Control State Changed */
 227 #define I_HMB_FRAME_IND I_HMB_SW2       /* Frame Indication */
 228 #define I_HMB_HOST_INT  I_HMB_SW3       /* Miscellaneous Interrupt */
 229
 230 /* tohostmailboxdata */
 231 #define HMB_DATA_NAKHANDLED     1       /* retransmit NAK'd frame */
 232 #define HMB_DATA_DEVREADY       2       /* talk to host after enable */
 233 #define HMB_DATA_FC             4       /* per prio flowcontrol update flag */
 234 #define HMB_DATA_FWREADY        8       /* fw ready for protocol activity */
 235
 236 #define HMB_DATA_FCDATA_MASK    0xff000000
 237 #define HMB_DATA_FCDATA_SHIFT   24
 238
 239 #define HMB_DATA_VERSION_MASK   0x00ff0000
 240 #define HMB_DATA_VERSION_SHIFT  16
 241
 242 /*
 243  * Software-defined protocol header
 244  */
 245
 246 /* Current protocol version */
 247 #define SDPCM_PROT_VERSION      4
 248
 249 /* SW frame header */
 250 #define SDPCM_PACKET_SEQUENCE(p)        (((u8 *)p)[0] & 0xff)
 251
 252 #define SDPCM_CHANNEL_MASK              0x00000f00
 253 #define SDPCM_CHANNEL_SHIFT             8
 254 #define SDPCM_PACKET_CHANNEL(p)         (((u8 *)p)[1] & 0x0f)
 255
 256 #define SDPCM_NEXTLEN_OFFSET            2
 257
 258 /* Data Offset from SOF (HW Tag, SW Tag, Pad) */
 259 #define SDPCM_DOFFSET_OFFSET            3       /* Data Offset */
 260 #define SDPCM_DOFFSET_VALUE(p)          (((u8 *)p)[SDPCM_DOFFSET_OFFSET] & 0xff)
 261 #define SDPCM_DOFFSET_MASK              0xff000000
 262 #define SDPCM_DOFFSET_SHIFT             24
 263 #define SDPCM_FCMASK_OFFSET             4       /* Flow control */
 264 #define SDPCM_FCMASK_VALUE(p)           (((u8 *)p)[SDPCM_FCMASK_OFFSET] & 0xff)
 265 #define SDPCM_WINDOW_OFFSET             5       /* Credit based fc */
 266 #define SDPCM_WINDOW_VALUE(p)           (((u8 *)p)[SDPCM_WINDOW_OFFSET] & 0xff)
 267
 268 #define SDPCM_SWHEADER_LEN      8       /* SW header is 64 bits */
 269
 270 /* logical channel numbers */
 271 #define SDPCM_CONTROL_CHANNEL   0       /* Control channel Id */
 272 #define SDPCM_EVENT_CHANNEL     1       /* Asyc Event Indication Channel Id */
 273 #define SDPCM_DATA_CHANNEL      2       /* Data Xmit/Recv Channel Id */
 274 #define SDPCM_GLOM_CHANNEL      3       /* For coalesced packets */
 275 #define SDPCM_TEST_CHANNEL      15      /* Reserved for test/debug packets */
 276
 277 #define SDPCM_SEQUENCE_WRAP     256     /* wrap-around val for 8bit frame seq */
 278
 279 #define SDPCM_GLOMDESC(p)       (((u8 *)p)[1] & 0x80)
 280
 281 /*
 282  * Shared structure between dongle and the host.
 283  * The structure contains pointers to trap or assert information.
 284  */
 285 #define SDPCM_SHARED_VERSION       0x0002
 286 #define SDPCM_SHARED_VERSION_MASK  0x00FF
 287 #define SDPCM_SHARED_ASSERT_BUILT  0x0100
 288 #define SDPCM_SHARED_ASSERT        0x0200
 289 #define SDPCM_SHARED_TRAP          0x0400
 290
 291 /* Space for header read, limit for data packets */
 292 #define MAX_HDR_READ    (1 << 6)
 293 #define MAX_RX_DATASZ   2048
 294
 295 /* Maximum milliseconds to wait for F2 to come up */
 296 #define BRCMF_WAIT_F2RDY        3000
 297
 298 /* Bump up limit on waiting for HT to account for first startup;
 299  * if the image is doing a CRC calculation before programming the PMU
 300  * for HT availability, it could take a couple hundred ms more, so
 301  * max out at a 1 second (1000000us).
 302  */
 303 #undef PMU_MAX_TRANSITION_DLY
 304 #define PMU_MAX_TRANSITION_DLY 1000000
 305
 306 /* Value for ChipClockCSR during initial setup */
 307 #define BRCMF_INIT_CLKCTL1      (SBSDIO_FORCE_HW_CLKREQ_OFF |   \
 308                                         SBSDIO_ALP_AVAIL_REQ)
 309
 310 /* Flags for SDH calls */
 311 #define F2SYNC  (SDIO_REQ_4BYTE | SDIO_REQ_FIXED)
 312
 313 /*
 314  * Conversion of 802.1D priority to precedence level
 315  */
 316 static uint prio2prec(u32 prio)
 317 {
 318         return (prio == PRIO_8021D_NONE || prio == PRIO_8021D_BE) ?
 319                (prio^2) : prio;
 320 }
 321
 322 /* core registers */
 323 struct sdpcmd_regs {
 324         u32 corecontrol;                /* 0x00, rev8 */
 325         u32 corestatus;                 /* rev8 */
 326         u32 PAD[1];
 327         u32 biststatus;                 /* rev8 */
 328
 329         /* PCMCIA access */
 330         u16 pcmciamesportaladdr;        /* 0x010, rev8 */
 331         u16 PAD[1];
 332         u16 pcmciamesportalmask;        /* rev8 */
 333         u16 PAD[1];
 334         u16 pcmciawrframebc;            /* rev8 */
 335         u16 PAD[1];
 336         u16 pcmciaunderflowtimer;       /* rev8 */
 337         u16 PAD[1];
 338
 339         /* interrupt */
 340         u32 intstatus;                  /* 0x020, rev8 */
 341         u32 hostintmask;                /* rev8 */
 342         u32 intmask;                    /* rev8 */
 343         u32 sbintstatus;                /* rev8 */
 344         u32 sbintmask;                  /* rev8 */
 345         u32 funcintmask;                /* rev4 */
 346         u32 PAD[2];
 347         u32 tosbmailbox;                /* 0x040, rev8 */
 348         u32 tohostmailbox;              /* rev8 */
 349         u32 tosbmailboxdata;            /* rev8 */
 350         u32 tohostmailboxdata;          /* rev8 */
 351
 352         /* synchronized access to registers in SDIO clock domain */
 353         u32 sdioaccess;                 /* 0x050, rev8 */
 354         u32 PAD[3];
 355
 356         /* PCMCIA frame control */
 357         u8 pcmciaframectrl;             /* 0x060, rev8 */
 358         u8 PAD[3];
 359         u8 pcmciawatermark;             /* rev8 */
 360         u8 PAD[155];
 361
 362         /* interrupt batching control */
 363         u32 intrcvlazy;                 /* 0x100, rev8 */
 364         u32 PAD[3];
 365
 366         /* counters */
 367         u32 cmd52rd;                    /* 0x110, rev8 */
 368         u32 cmd52wr;                    /* rev8 */
 369         u32 cmd53rd;                    /* rev8 */
 370         u32 cmd53wr;                    /* rev8 */
 371         u32 abort;                      /* rev8 */
 372         u32 datacrcerror;               /* rev8 */
 373         u32 rdoutofsync;                /* rev8 */
 374         u32 wroutofsync;                /* rev8 */
 375         u32 writebusy;                  /* rev8 */
 376         u32 readwait;                   /* rev8 */
 377         u32 readterm;                   /* rev8 */
 378         u32 writeterm;                  /* rev8 */
 379         u32 PAD[40];
 380         u32 clockctlstatus;             /* rev8 */
 381         u32 PAD[7];
 382
 383         u32 PAD[128];                   /* DMA engines */
 384
 385         /* SDIO/PCMCIA CIS region */
 386         char cis[512];                  /* 0x400-0x5ff, rev6 */
 387
 388         /* PCMCIA function control registers */
 389         char pcmciafcr[256];            /* 0x600-6ff, rev6 */
 390         u16 PAD[55];
 391
 392         /* PCMCIA backplane access */
 393         u16 backplanecsr;               /* 0x76E, rev6 */
 394         u16 backplaneaddr0;             /* rev6 */
 395         u16 backplaneaddr1;             /* rev6 */
 396         u16 backplaneaddr2;             /* rev6 */
 397         u16 backplaneaddr3;             /* rev6 */
 398         u16 backplanedata0;             /* rev6 */
 399         u16 backplanedata1;             /* rev6 */
 400         u16 backplanedata2;             /* rev6 */
 401         u16 backplanedata3;             /* rev6 */
 402         u16 PAD[31];
 403
 404         /* sprom "size" & "blank" info */
 405         u16 spromstatus;                /* 0x7BE, rev2 */
 406         u32 PAD[464];
 407
 408         u16 PAD[0x80];
 409 };
 410
 411 #ifdef BCMDBG
 412 /* Device console log buffer state */
 413 struct brcmf_console {
 414         uint count;             /* Poll interval msec counter */
 415         uint log_addr;          /* Log struct address (fixed) */
 416         struct rte_log_le log_le;       /* Log struct (host copy) */
 417         uint bufsize;           /* Size of log buffer */
 418         u8 *buf;                /* Log buffer (host copy) */
 419         uint last;              /* Last buffer read index */
 420 };
 421 #endif                          /* BCMDBG */
 422
 423 struct sdpcm_shared {
 424         u32 flags;
 425         u32 trap_addr;
 426         u32 assert_exp_addr;
 427         u32 assert_file_addr;
 428         u32 assert_line;
 429         u32 console_addr;       /* Address of struct rte_console */
 430         u32 msgtrace_addr;
 431         u8 tag[32];
 432 };
 433
 434 struct sdpcm_shared_le {
 435         __le32 flags;
 436         __le32 trap_addr;
 437         __le32 assert_exp_addr;
 438         __le32 assert_file_addr;
 439         __le32 assert_line;
 440         __le32 console_addr;    /* Address of struct rte_console */
 441         __le32 msgtrace_addr;
 442         u8 tag[32];
 443 };
 444
 445
 446 /* misc chip info needed by some of the routines */
 447 /* Private data for SDIO bus interaction */
 448 struct brcmf_bus {
 449         struct brcmf_pub *drvr;
 450
 451         struct brcmf_sdio_dev *sdiodev; /* sdio device handler */
 452         struct chip_info *ci;   /* Chip info struct */
 453         char *vars;             /* Variables (from CIS and/or other) */
 454         uint varsz;             /* Size of variables buffer */
 455
 456         u32 ramsize;            /* Size of RAM in SOCRAM (bytes) */
 457
 458         u32 hostintmask;        /* Copy of Host Interrupt Mask */
 459         u32 intstatus;  /* Intstatus bits (events) pending */
 460         bool dpc_sched;         /* Indicates DPC schedule (intrpt rcvd) */
 461         bool fcstate;           /* State of dongle flow-control */
 462
 463         uint blocksize;         /* Block size of SDIO transfers */
 464         uint roundup;           /* Max roundup limit */
 465
 466         struct pktq txq;        /* Queue length used for flow-control */
 467         u8 flowcontrol; /* per prio flow control bitmask */
 468         u8 tx_seq;              /* Transmit sequence number (next) */
 469         u8 tx_max;              /* Maximum transmit sequence allowed */
 470
 471         u8 hdrbuf[MAX_HDR_READ + BRCMF_SDALIGN];
 472         u8 *rxhdr;              /* Header of current rx frame (in hdrbuf) */
 473         u16 nextlen;            /* Next Read Len from last header */
 474         u8 rx_seq;              /* Receive sequence number (expected) */
 475         bool rxskip;            /* Skip receive (awaiting NAK ACK) */
 476
 477         uint rxbound;           /* Rx frames to read before resched */
 478         uint txbound;           /* Tx frames to send before resched */
 479         uint txminmax;
 480
 481         struct sk_buff *glomd;  /* Packet containing glomming descriptor */
 482         struct sk_buff_head glom; /* Packet list for glommed superframe */
 483         uint glomerr;           /* Glom packet read errors */
 484
 485         u8 *rxbuf;              /* Buffer for receiving control packets */
 486         uint rxblen;            /* Allocated length of rxbuf */
 487         u8 *rxctl;              /* Aligned pointer into rxbuf */
 488         u8 *databuf;            /* Buffer for receiving big glom packet */
 489         u8 *dataptr;            /* Aligned pointer into databuf */
 490         uint rxlen;             /* Length of valid data in buffer */
 491
 492         u8 sdpcm_ver;   /* Bus protocol reported by dongle */
 493
 494         bool intr;              /* Use interrupts */
 495         bool poll;              /* Use polling */
 496         bool ipend;             /* Device interrupt is pending */
 497         uint intrcount;         /* Count of device interrupt callbacks */
 498         uint lastintrs;         /* Count as of last watchdog timer */
 499         uint spurious;          /* Count of spurious interrupts */
 500         uint pollrate;          /* Ticks between device polls */
 501         uint polltick;          /* Tick counter */
 502         uint pollcnt;           /* Count of active polls */
 503
 504 #ifdef BCMDBG
 505         uint console_interval;
 506         struct brcmf_console console;   /* Console output polling support */
 507         uint console_addr;      /* Console address from shared struct */
 508 #endif                          /* BCMDBG */
 509
 510         uint regfails;          /* Count of R_REG failures */
 511
 512         uint clkstate;          /* State of sd and backplane clock(s) */
 513         bool activity;          /* Activity flag for clock down */
 514         s32 idletime;           /* Control for activity timeout */
 515         s32 idlecount;  /* Activity timeout counter */
 516         s32 idleclock;  /* How to set bus driver when idle */
 517         s32 sd_rxchain;
 518         bool use_rxchain;       /* If brcmf should use PKT chains */
 519         bool sleeping;          /* Is SDIO bus sleeping? */
 520         bool rxflow_mode;       /* Rx flow control mode */
 521         bool rxflow;            /* Is rx flow control on */
 522         bool alp_only;          /* Don't use HT clock (ALP only) */
 523 /* Field to decide if rx of control frames happen in rxbuf or lb-pool */
 524         bool usebufpool;
 525
 526         /* Some additional counters */
 527         uint tx_sderrs;         /* Count of tx attempts with sd errors */
 528         uint fcqueued;          /* Tx packets that got queued */
 529         uint rxrtx;             /* Count of rtx requests (NAK to dongle) */
 530         uint rx_toolong;        /* Receive frames too long to receive */
 531         uint rxc_errors;        /* SDIO errors when reading control frames */
 532         uint rx_hdrfail;        /* SDIO errors on header reads */
 533         uint rx_badhdr;         /* Bad received headers (roosync?) */
 534         uint rx_badseq;         /* Mismatched rx sequence number */
 535         uint fc_rcvd;           /* Number of flow-control events received */
 536         uint fc_xoff;           /* Number which turned on flow-control */
 537         uint fc_xon;            /* Number which turned off flow-control */
 538         uint rxglomfail;        /* Failed deglom attempts */
 539         uint rxglomframes;      /* Number of glom frames (superframes) */
 540         uint rxglompkts;        /* Number of packets from glom frames */
 541         uint f2rxhdrs;          /* Number of header reads */
 542         uint f2rxdata;          /* Number of frame data reads */
 543         uint f2txdata;          /* Number of f2 frame writes */
 544         uint f1regdata;         /* Number of f1 register accesses */
 545
 546         u8 *ctrl_frame_buf;
 547         u32 ctrl_frame_len;
 548         bool ctrl_frame_stat;
 549
 550         spinlock_t txqlock;
 551         wait_queue_head_t ctrl_wait;
 552         wait_queue_head_t dcmd_resp_wait;
 553
 554         struct timer_list timer;
 555         struct completion watchdog_wait;
 556         struct task_struct *watchdog_tsk;
 557         bool wd_timer_valid;
 558         uint save_ms;
 559
 560         struct task_struct *dpc_tsk;
 561         struct completion dpc_wait;
 562
 563         struct semaphore sdsem;
 564
 565         const char *fw_name;
 566         const struct firmware *firmware;
 567         const char *nv_name;
 568         u32 fw_ptr;
 569 };
 570
 571 /* clkstate */
 572 #define CLK_NONE        0
 573 #define CLK_SDONLY      1
 574 #define CLK_PENDING     2       /* Not used yet */
 575 #define CLK_AVAIL       3
 576
 577 #ifdef BCMDBG
 578 static int qcount[NUMPRIO];
 579 static int tx_packets[NUMPRIO];
 580 #endif                          /* BCMDBG */
 581
 582 #define SDIO_DRIVE_STRENGTH     6       /* in milliamps */
 583
 584 #define RETRYCHAN(chan) ((chan) == SDPCM_EVENT_CHANNEL)
 585
 586 /* Retry count for register access failures */
 587 static const uint retry_limit = 2;
 588
 589 /* Limit on rounding up frames */
 590 static const uint max_roundup = 512;
 591
 592 #define ALIGNMENT  4
 593
 594 static void pkt_align(struct sk_buff *p, int len, int align)
 595 {
 596         uint datalign;
 597         datalign = (unsigned long)(p->data);
 598         datalign = roundup(datalign, (align)) - datalign;
 599         if (datalign)
 600                 skb_pull(p, datalign);
 601         __skb_trim(p, len);
 602 }
 603
 604 /* To check if there's window offered */
 605 static bool data_ok(struct brcmf_bus *bus)
 606 {
 607         return (u8)(bus->tx_max - bus->tx_seq) != 0 &&
 608                ((u8)(bus->tx_max - bus->tx_seq) & 0x80) == 0;
 609 }
 610
 611 /*
 612  * Reads a register in the SDIO hardware block. This block occupies a series of
 613  * adresses on the 32 bit backplane bus.
 614  */
 615 static void
 616 r_sdreg32(struct brcmf_bus *bus, u32 *regvar, u32 reg_offset, u32 *retryvar)
 617 {
 618         u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
 619         *retryvar = 0;
 620         do {
 621                 *regvar = brcmf_sdcard_reg_read(bus->sdiodev,
 622                                 bus->ci->c_inf[idx].base + reg_offset,
 623                                 sizeof(u32));
 624         } while (brcmf_sdcard_regfail(bus->sdiodev) &&
 625                  (++(*retryvar) <= retry_limit));
 626         if (*retryvar) {
 627                 bus->regfails += (*retryvar-1);
 628                 if (*retryvar > retry_limit) {
 629                         brcmf_dbg(ERROR, "FAILED READ %Xh\n", reg_offset);
 630                         *regvar = 0;
 631                 }
 632         }
 633 }
 634
 635 static void
 636 w_sdreg32(struct brcmf_bus *bus, u32 regval, u32 reg_offset, u32 *retryvar)
 637 {
 638         u8 idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
 639         *retryvar = 0;
 640         do {
 641                 brcmf_sdcard_reg_write(bus->sdiodev,
 642                                        bus->ci->c_inf[idx].base + reg_offset,
 643                                        sizeof(u32), regval);
 644         } while (brcmf_sdcard_regfail(bus->sdiodev) &&
 645                  (++(*retryvar) <= retry_limit));
 646         if (*retryvar) {
 647                 bus->regfails += (*retryvar-1);
 648                 if (*retryvar > retry_limit)
 649                         brcmf_dbg(ERROR, "FAILED REGISTER WRITE %Xh\n",
 650                                   reg_offset);
 651         }
 652 }
 653
 654 #define PKT_AVAILABLE()         (intstatus & I_HMB_FRAME_IND)
 655
 656 #define HOSTINTMASK             (I_HMB_SW_MASK | I_CHIPACTIVE)
 657
 658 /* Packet free applicable unconditionally for sdio and sdspi.
 659  * Conditional if bufpool was present for gspi bus.
 660  */
 661 static void brcmf_sdbrcm_pktfree2(struct brcmf_bus *bus, struct sk_buff *pkt)
 662 {
 663         if (bus->usebufpool)
 664                 brcmu_pkt_buf_free_skb(pkt);
 665 }
 666
 667 /* Turn backplane clock on or off */
 668 static int brcmf_sdbrcm_htclk(struct brcmf_bus *bus, bool on, bool pendok)
 669 {
 670         int err;
 671         u8 clkctl, clkreq, devctl;
 672         unsigned long timeout;
 673
 674         brcmf_dbg(TRACE, "Enter\n");
 675
 676         clkctl = 0;
 677
 678         if (on) {
 679                 /* Request HT Avail */
 680                 clkreq =
 681                     bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ;
 682
 683                 brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
 684                                        SBSDIO_FUNC1_CHIPCLKCSR, clkreq, &err);
 685                 if (err) {
 686                         brcmf_dbg(ERROR, "HT Avail request error: %d\n", err);
 687                         return -EBADE;
 688                 }
 689
 690                 if (pendok && ((bus->ci->c_inf[1].id == PCMCIA_CORE_ID)
 691                                && (bus->ci->c_inf[1].rev == 9))) {
 692                         u32 dummy, retries;
 693                         r_sdreg32(bus, &dummy,
 694                                   offsetof(struct sdpcmd_regs, clockctlstatus),
 695                                   &retries);
 696                 }
 697
 698                 /* Check current status */
 699                 clkctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
 700                                                SBSDIO_FUNC1_CHIPCLKCSR, &err);
 701                 if (err) {
 702                         brcmf_dbg(ERROR, "HT Avail read error: %d\n", err);
 703                         return -EBADE;
 704                 }
 705
 706                 /* Go to pending and await interrupt if appropriate */
 707                 if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) {
 708                         /* Allow only clock-available interrupt */
 709                         devctl = brcmf_sdcard_cfg_read(bus->sdiodev,
 710                                         SDIO_FUNC_1,
 711                                         SBSDIO_DEVICE_CTL, &err);
 712                         if (err) {
 713                                 brcmf_dbg(ERROR, "Devctl error setting CA: %d\n",
 714                                           err);
 715                                 return -EBADE;
 716                         }
 717
 718                         devctl |= SBSDIO_DEVCTL_CA_INT_ONLY;
 719                         brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
 720                                                SBSDIO_DEVICE_CTL, devctl, &err);
 721                         brcmf_dbg(INFO, "CLKCTL: set PENDING\n");
 722                         bus->clkstate = CLK_PENDING;
 723
 724                         return 0;
 725                 } else if (bus->clkstate == CLK_PENDING) {
 726                         /* Cancel CA-only interrupt filter */
 727                         devctl =
 728                             brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
 729                                                   SBSDIO_DEVICE_CTL, &err);
 730                         devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
 731                         brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
 732                                 SBSDIO_DEVICE_CTL, devctl, &err);
 733                 }
 734
 735                 /* Otherwise, wait here (polling) for HT Avail */
 736                 timeout = jiffies +
 737                           msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000);
 738                 while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
 739                         clkctl = brcmf_sdcard_cfg_read(bus->sdiodev,
 740                                                        SDIO_FUNC_1,
 741                                                        SBSDIO_FUNC1_CHIPCLKCSR,
 742                                                        &err);
 743                         if (time_after(jiffies, timeout))
 744                                 break;
 745                         else
 746                                 usleep_range(5000, 10000);
 747                 }
 748                 if (err) {
 749                         brcmf_dbg(ERROR, "HT Avail request error: %d\n", err);
 750                         return -EBADE;
 751                 }
 752                 if (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
 753                         brcmf_dbg(ERROR, "HT Avail timeout (%d): clkctl 0x%02x\n",
 754                                   PMU_MAX_TRANSITION_DLY, clkctl);
 755                         return -EBADE;
 756                 }
 757
 758                 /* Mark clock available */
 759                 bus->clkstate = CLK_AVAIL;
 760                 brcmf_dbg(INFO, "CLKCTL: turned ON\n");
 761
 762 #if defined(BCMDBG)
 763                 if (bus->alp_only != true) {
 764                         if (SBSDIO_ALPONLY(clkctl))
 765                                 brcmf_dbg(ERROR, "HT Clock should be on\n");
 766                 }
 767 #endif                          /* defined (BCMDBG) */
 768
 769                 bus->activity = true;
 770         } else {
 771                 clkreq = 0;
 772
 773                 if (bus->clkstate == CLK_PENDING) {
 774                         /* Cancel CA-only interrupt filter */
 775                         devctl = brcmf_sdcard_cfg_read(bus->sdiodev,
 776                                         SDIO_FUNC_1,
 777                                         SBSDIO_DEVICE_CTL, &err);
 778                         devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
 779                         brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
 780                                 SBSDIO_DEVICE_CTL, devctl, &err);
 781                 }
 782
 783                 bus->clkstate = CLK_SDONLY;
 784                 brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
 785                         SBSDIO_FUNC1_CHIPCLKCSR, clkreq, &err);
 786                 brcmf_dbg(INFO, "CLKCTL: turned OFF\n");
 787                 if (err) {
 788                         brcmf_dbg(ERROR, "Failed access turning clock off: %d\n",
 789                                   err);
 790                         return -EBADE;
 791                 }
 792         }
 793         return 0;
 794 }
 795
 796 /* Change idle/active SD state */
 797 static int brcmf_sdbrcm_sdclk(struct brcmf_bus *bus, bool on)
 798 {
 799         brcmf_dbg(TRACE, "Enter\n");
 800
 801         if (on)
 802                 bus->clkstate = CLK_SDONLY;
 803         else
 804                 bus->clkstate = CLK_NONE;
 805
 806         return 0;
 807 }
 808
 809 /* Transition SD and backplane clock readiness */
 810 static int brcmf_sdbrcm_clkctl(struct brcmf_bus *bus, uint target, bool pendok)
 811 {
 812 #ifdef BCMDBG
 813         uint oldstate = bus->clkstate;
 814 #endif                          /* BCMDBG */
 815
 816         brcmf_dbg(TRACE, "Enter\n");
 817
 818         /* Early exit if we're already there */
 819         if (bus->clkstate == target) {
 820                 if (target == CLK_AVAIL) {
 821                         brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
 822                         bus->activity = true;
 823                 }
 824                 return 0;
 825         }
 826
 827         switch (target) {
 828         case CLK_AVAIL:
 829                 /* Make sure SD clock is available */
 830                 if (bus->clkstate == CLK_NONE)
 831                         brcmf_sdbrcm_sdclk(bus, true);
 832                 /* Now request HT Avail on the backplane */
 833                 brcmf_sdbrcm_htclk(bus, true, pendok);
 834                 brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
 835                 bus->activity = true;
 836                 break;
 837
 838         case CLK_SDONLY:
 839                 /* Remove HT request, or bring up SD clock */
 840                 if (bus->clkstate == CLK_NONE)
 841                         brcmf_sdbrcm_sdclk(bus, true);
 842                 else if (bus->clkstate == CLK_AVAIL)
 843                         brcmf_sdbrcm_htclk(bus, false, false);
 844                 else
 845                         brcmf_dbg(ERROR, "request for %d -> %d\n",
 846                                   bus->clkstate, target);
 847                 brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
 848                 break;
 849
 850         case CLK_NONE:
 851                 /* Make sure to remove HT request */
 852                 if (bus->clkstate == CLK_AVAIL)
 853                         brcmf_sdbrcm_htclk(bus, false, false);
 854                 /* Now remove the SD clock */
 855                 brcmf_sdbrcm_sdclk(bus, false);
 856                 brcmf_sdbrcm_wd_timer(bus, 0);
 857                 break;
 858         }
 859 #ifdef BCMDBG
 860         brcmf_dbg(INFO, "%d -> %d\n", oldstate, bus->clkstate);
 861 #endif                          /* BCMDBG */
 862
 863         return 0;
 864 }
 865
 866 static int brcmf_sdbrcm_bussleep(struct brcmf_bus *bus, bool sleep)
 867 {
 868         uint retries = 0;
 869
 870         brcmf_dbg(INFO, "request %s (currently %s)\n",
 871                   sleep ? "SLEEP" : "WAKE",
 872                   bus->sleeping ? "SLEEP" : "WAKE");
 873
 874         /* Done if we're already in the requested state */
 875         if (sleep == bus->sleeping)
 876                 return 0;
 877
 878         /* Going to sleep: set the alarm and turn off the lights... */
 879         if (sleep) {
 880                 /* Don't sleep if something is pending */
 881                 if (bus->dpc_sched || bus->rxskip || pktq_len(&bus->txq))
 882                         return -EBUSY;
 883
 884                 /* Make sure the controller has the bus up */
 885                 brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
 886
 887                 /* Tell device to start using OOB wakeup */
 888                 w_sdreg32(bus, SMB_USE_OOB,
 889                           offsetof(struct sdpcmd_regs, tosbmailbox), &retries);
 890                 if (retries > retry_limit)
 891                         brcmf_dbg(ERROR, "CANNOT SIGNAL CHIP, WILL NOT WAKE UP!!\n");
 892
 893                 /* Turn off our contribution to the HT clock request */
 894                 brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
 895
 896                 brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
 897                         SBSDIO_FUNC1_CHIPCLKCSR,
 898                         SBSDIO_FORCE_HW_CLKREQ_OFF, NULL);
 899
 900                 /* Isolate the bus */
 901                 brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
 902                         SBSDIO_DEVICE_CTL,
 903                         SBSDIO_DEVCTL_PADS_ISO, NULL);
 904
 905                 /* Change state */
 906                 bus->sleeping = true;
 907
 908         } else {
 909                 /* Waking up: bus power up is ok, set local state */
 910
 911                 brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
 912                         SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
 913
 914                 /* Force pad isolation off if possible
 915                          (in case power never toggled) */
 916                 if ((bus->ci->c_inf[1].id == PCMCIA_CORE_ID)
 917                     && (bus->ci->c_inf[1].rev >= 10))
 918                         brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
 919                                 SBSDIO_DEVICE_CTL, 0, NULL);
 920
 921                 /* Make sure the controller has the bus up */
 922                 brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
 923
 924                 /* Send misc interrupt to indicate OOB not needed */
 925                 w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, tosbmailboxdata),
 926                           &retries);
 927                 if (retries <= retry_limit)
 928                         w_sdreg32(bus, SMB_DEV_INT,
 929                                   offsetof(struct sdpcmd_regs, tosbmailbox),
 930                                   &retries);
 931
 932                 if (retries > retry_limit)
 933                         brcmf_dbg(ERROR, "CANNOT SIGNAL CHIP TO CLEAR OOB!!\n");
 934
 935                 /* Make sure we have SD bus access */
 936                 brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
 937
 938                 /* Change state */
 939                 bus->sleeping = false;
 940         }
 941
 942         return 0;
 943 }
 944
 945 static void bus_wake(struct brcmf_bus *bus)
 946 {
 947         if (bus->sleeping)
 948                 brcmf_sdbrcm_bussleep(bus, false);
 949 }
 950
 951 static u32 brcmf_sdbrcm_hostmail(struct brcmf_bus *bus)
 952 {
 953         u32 intstatus = 0;
 954         u32 hmb_data;
 955         u8 fcbits;
 956         uint retries = 0;
 957
 958         brcmf_dbg(TRACE, "Enter\n");
 959
 960         /* Read mailbox data and ack that we did so */
 961         r_sdreg32(bus, &hmb_data,
 962                   offsetof(struct sdpcmd_regs, tohostmailboxdata), &retries);
 963
 964         if (retries <= retry_limit)
 965                 w_sdreg32(bus, SMB_INT_ACK,
 966                           offsetof(struct sdpcmd_regs, tosbmailbox), &retries);
 967         bus->f1regdata += 2;
 968
 969         /* Dongle recomposed rx frames, accept them again */
 970         if (hmb_data & HMB_DATA_NAKHANDLED) {
 971                 brcmf_dbg(INFO, "Dongle reports NAK handled, expect rtx of %d\n",
 972                           bus->rx_seq);
 973                 if (!bus->rxskip)
 974                         brcmf_dbg(ERROR, "unexpected NAKHANDLED!\n");
 975
 976                 bus->rxskip = false;
 977                 intstatus |= I_HMB_FRAME_IND;
 978         }
 979
 980         /*
 981          * DEVREADY does not occur with gSPI.
 982          */
 983         if (hmb_data & (HMB_DATA_DEVREADY | HMB_DATA_FWREADY)) {
 984                 bus->sdpcm_ver =
 985                     (hmb_data & HMB_DATA_VERSION_MASK) >>
 986                     HMB_DATA_VERSION_SHIFT;
 987                 if (bus->sdpcm_ver != SDPCM_PROT_VERSION)
 988                         brcmf_dbg(ERROR, "Version mismatch, dongle reports %d, "
 989                                   "expecting %d\n",
 990                                   bus->sdpcm_ver, SDPCM_PROT_VERSION);
 991                 else
 992                         brcmf_dbg(INFO, "Dongle ready, protocol version %d\n",
 993                                   bus->sdpcm_ver);
 994         }
 995
 996         /*
 997          * Flow Control has been moved into the RX headers and this out of band
 998          * method isn't used any more.
 999          * remaining backward compatible with older dongles.
1000          */
1001         if (hmb_data & HMB_DATA_FC) {
1002                 fcbits = (hmb_data & HMB_DATA_FCDATA_MASK) >>
1003                                                         HMB_DATA_FCDATA_SHIFT;
1004
1005                 if (fcbits & ~bus->flowcontrol)
1006                         bus->fc_xoff++;
1007
1008                 if (bus->flowcontrol & ~fcbits)
1009                         bus->fc_xon++;
1010
1011                 bus->fc_rcvd++;
1012                 bus->flowcontrol = fcbits;
1013         }
1014
1015         /* Shouldn't be any others */
1016         if (hmb_data & ~(HMB_DATA_DEVREADY |
1017                          HMB_DATA_NAKHANDLED |
1018                          HMB_DATA_FC |
1019                          HMB_DATA_FWREADY |
1020                          HMB_DATA_FCDATA_MASK | HMB_DATA_VERSION_MASK))
1021                 brcmf_dbg(ERROR, "Unknown mailbox data content: 0x%02x\n",
1022                           hmb_data);
1023
1024         return intstatus;
1025 }
1026
1027 static void brcmf_sdbrcm_rxfail(struct brcmf_bus *bus, bool abort, bool rtx)
1028 {
1029         uint retries = 0;
1030         u16 lastrbc;
1031         u8 hi, lo;
1032         int err;
1033
1034         brcmf_dbg(ERROR, "%sterminate frame%s\n",
1035                   abort ? "abort command, " : "",
1036                   rtx ? ", send NAK" : "");
1037
1038         if (abort)
1039                 brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
1040
1041         brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
1042                                SBSDIO_FUNC1_FRAMECTRL,
1043                                SFC_RF_TERM, &err);
1044         bus->f1regdata++;
1045
1046         /* Wait until the packet has been flushed (device/FIFO stable) */
1047         for (lastrbc = retries = 0xffff; retries > 0; retries--) {
1048                 hi = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
1049                                            SBSDIO_FUNC1_RFRAMEBCHI, NULL);
1050                 lo = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
1051                                            SBSDIO_FUNC1_RFRAMEBCLO, NULL);
1052                 bus->f1regdata += 2;
1053
1054                 if ((hi == 0) && (lo == 0))
1055                         break;
1056
1057                 if ((hi > (lastrbc >> 8)) && (lo > (lastrbc & 0x00ff))) {
1058                         brcmf_dbg(ERROR, "count growing: last 0x%04x now 0x%04x\n",
1059                                   lastrbc, (hi << 8) + lo);
1060                 }
1061                 lastrbc = (hi << 8) + lo;
1062         }
1063
1064         if (!retries)
1065                 brcmf_dbg(ERROR, "count never zeroed: last 0x%04x\n", lastrbc);
1066         else
1067                 brcmf_dbg(INFO, "flush took %d iterations\n", 0xffff - retries);
1068
1069         if (rtx) {
1070                 bus->rxrtx++;
1071                 w_sdreg32(bus, SMB_NAK,
1072                           offsetof(struct sdpcmd_regs, tosbmailbox), &retries);
1073
1074                 bus->f1regdata++;
1075                 if (retries <= retry_limit)
1076                         bus->rxskip = true;
1077         }
1078
1079         /* Clear partial in any case */
1080         bus->nextlen = 0;
1081
1082         /* If we can't reach the device, signal failure */
1083         if (err || brcmf_sdcard_regfail(bus->sdiodev))
1084                 bus->drvr->busstate = BRCMF_BUS_DOWN;
1085 }
1086
1087 /* copy a buffer into a pkt buffer chain */
1088 static uint brcmf_sdbrcm_glom_from_buf(struct brcmf_bus *bus, uint len)
1089 {
1090         uint n, ret = 0;
1091         struct sk_buff *p;
1092         u8 *buf;
1093
1094         buf = bus->dataptr;
1095
1096         /* copy the data */
1097         skb_queue_walk(&bus->glom, p) {
1098                 n = min_t(uint, p->len, len);
1099                 memcpy(p->data, buf, n);
1100                 buf += n;
1101                 len -= n;
1102                 ret += n;
1103                 if (!len)
1104                         break;
1105         }
1106
1107         return ret;
1108 }
1109
1110 /* return total length of buffer chain */
1111 static uint brcmf_sdbrcm_glom_len(struct brcmf_bus *bus)
1112 {
1113         struct sk_buff *p;
1114         uint total;
1115
1116         total = 0;
1117         skb_queue_walk(&bus->glom, p)
1118                 total += p->len;
1119         return total;
1120 }
1121
1122 static void brcmf_sdbrcm_free_glom(struct brcmf_bus *bus)
1123 {
1124         struct sk_buff *cur, *next;
1125
1126         skb_queue_walk_safe(&bus->glom, cur, next) {
1127                 skb_unlink(cur, &bus->glom);
1128                 brcmu_pkt_buf_free_skb(cur);
1129         }
1130 }
1131
1132 static u8 brcmf_sdbrcm_rxglom(struct brcmf_bus *bus, u8 rxseq)
1133 {
1134         u16 dlen, totlen;
1135         u8 *dptr, num = 0;
1136
1137         u16 sublen, check;
1138         struct sk_buff *pfirst, *plast, *pnext, *save_pfirst;
1139
1140         int errcode;
1141         u8 chan, seq, doff, sfdoff;
1142         u8 txmax;
1143
1144         int ifidx = 0;
1145         bool usechain = bus->use_rxchain;
1146
1147         /* If packets, issue read(s) and send up packet chain */
1148         /* Return sequence numbers consumed? */
1149
1150         brcmf_dbg(TRACE, "start: glomd %p glom %p\n",
1151                   bus->glomd, skb_peek(&bus->glom));
1152
1153         /* If there's a descriptor, generate the packet chain */
1154         if (bus->glomd) {
1155                 pfirst = plast = pnext = NULL;
1156                 dlen = (u16) (bus->glomd->len);
1157                 dptr = bus->glomd->data;
1158                 if (!dlen || (dlen & 1)) {
1159                         brcmf_dbg(ERROR, "bad glomd len(%d), ignore descriptor\n",
1160                                   dlen);
1161                         dlen = 0;
1162                 }
1163
1164                 for (totlen = num = 0; dlen; num++) {
1165                         /* Get (and move past) next length */
1166                         sublen = get_unaligned_le16(dptr);
1167                         dlen -= sizeof(u16);
1168                         dptr += sizeof(u16);
1169                         if ((sublen < SDPCM_HDRLEN) ||
1170                             ((num == 0) && (sublen < (2 * SDPCM_HDRLEN)))) {
1171                                 brcmf_dbg(ERROR, "descriptor len %d bad: %d\n",
1172                                           num, sublen);
1173                                 pnext = NULL;
1174                                 break;
1175                         }
1176                         if (sublen % BRCMF_SDALIGN) {
1177                                 brcmf_dbg(ERROR, "sublen %d not multiple of %d\n",
1178                                           sublen, BRCMF_SDALIGN);
1179                                 usechain = false;
1180                         }
1181                         totlen += sublen;
1182
1183                         /* For last frame, adjust read len so total
1184                                  is a block multiple */
1185                         if (!dlen) {
1186                                 sublen +=
1187                                     (roundup(totlen, bus->blocksize) - totlen);
1188                                 totlen = roundup(totlen, bus->blocksize);
1189                         }
1190
1191                         /* Allocate/chain packet for next subframe */
1192                         pnext = brcmu_pkt_buf_get_skb(sublen + BRCMF_SDALIGN);
1193                         if (pnext == NULL) {
1194                                 brcmf_dbg(ERROR, "bcm_pkt_buf_get_skb failed, num %d len %d\n",
1195                                           num, sublen);
1196                                 break;
1197                         }
1198                         skb_queue_tail(&bus->glom, pnext);
1199
1200                         /* Adhere to start alignment requirements */
1201                         pkt_align(pnext, sublen, BRCMF_SDALIGN);
1202                 }
1203
1204                 /* If all allocations succeeded, save packet chain
1205                          in bus structure */
1206                 if (pnext) {
1207                         brcmf_dbg(GLOM, "allocated %d-byte packet chain for %d subframes\n",
1208                                   totlen, num);
1209                         if (BRCMF_GLOM_ON() && bus->nextlen &&
1210                             totlen != bus->nextlen) {
1211                                 brcmf_dbg(GLOM, "glomdesc mismatch: nextlen %d glomdesc %d rxseq %d\n",
1212                                           bus->nextlen, totlen, rxseq);
1213                         }
1214                         pfirst = pnext = NULL;
1215                 } else {
1216                         brcmf_sdbrcm_free_glom(bus);
1217                         num = 0;
1218                 }
1219
1220                 /* Done with descriptor packet */
1221                 brcmu_pkt_buf_free_skb(bus->glomd);
1222                 bus->glomd = NULL;
1223                 bus->nextlen = 0;
1224         }
1225
1226         /* Ok -- either we just generated a packet chain,
1227                  or had one from before */
1228         if (!skb_queue_empty(&bus->glom)) {
1229                 if (BRCMF_GLOM_ON()) {
1230                         brcmf_dbg(GLOM, "try superframe read, packet chain:\n");
1231                         skb_queue_walk(&bus->glom, pnext) {
1232                                 brcmf_dbg(GLOM, "    %p: %p len 0x%04x (%d)\n",
1233                                           pnext, (u8 *) (pnext->data),
1234                                           pnext->len, pnext->len);
1235                         }
1236                 }
1237
1238                 pfirst = skb_peek(&bus->glom);
1239                 dlen = (u16) brcmf_sdbrcm_glom_len(bus);
1240
1241                 /* Do an SDIO read for the superframe.  Configurable iovar to
1242                  * read directly into the chained packet, or allocate a large
1243                  * packet and and copy into the chain.
1244                  */
1245                 if (usechain) {
1246                         errcode = brcmf_sdcard_recv_buf(bus->sdiodev,
1247                                         bus->sdiodev->sbwad,
1248                                         SDIO_FUNC_2,
1249                                         F2SYNC, (u8 *) pfirst->data, dlen,
1250                                         pfirst);
1251                 } else if (bus->dataptr) {
1252                         errcode = brcmf_sdcard_recv_buf(bus->sdiodev,
1253                                         bus->sdiodev->sbwad,
1254                                         SDIO_FUNC_2,
1255                                         F2SYNC, bus->dataptr, dlen,
1256                                         NULL);
1257                         sublen = (u16) brcmf_sdbrcm_glom_from_buf(bus, dlen);
1258                         if (sublen != dlen) {
1259                                 brcmf_dbg(ERROR, "FAILED TO COPY, dlen %d sublen %d\n",
1260                                           dlen, sublen);
1261                                 errcode = -1;
1262                         }
1263                         pnext = NULL;
1264                 } else {
1265                         brcmf_dbg(ERROR, "COULDN'T ALLOC %d-BYTE GLOM, FORCE FAILURE\n",
1266                                   dlen);
1267                         errcode = -1;
1268                 }
1269                 bus->f2rxdata++;
1270
1271                 /* On failure, kill the superframe, allow a couple retries */
1272                 if (errcode < 0) {
1273                         brcmf_dbg(ERROR, "glom read of %d bytes failed: %d\n",
1274                                   dlen, errcode);
1275                         bus->drvr->rx_errors++;
1276
1277                         if (bus->glomerr++ < 3) {
1278                                 brcmf_sdbrcm_rxfail(bus, true, true);
1279                         } else {
1280                                 bus->glomerr = 0;
1281                                 brcmf_sdbrcm_rxfail(bus, true, false);
1282                                 bus->rxglomfail++;
1283                                 brcmf_sdbrcm_free_glom(bus);
1284                         }
1285                         return 0;
1286                 }
1287 #ifdef BCMDBG
1288                 if (BRCMF_GLOM_ON()) {
1289                         printk(KERN_DEBUG "SUPERFRAME:\n");
1290                         print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
1291                                 pfirst->data, min_t(int, pfirst->len, 48));
1292                 }
1293 #endif
1294
1295                 /* Validate the superframe header */
1296                 dptr = (u8 *) (pfirst->data);
1297                 sublen = get_unaligned_le16(dptr);
1298                 check = get_unaligned_le16(dptr + sizeof(u16));
1299
1300                 chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]);
1301                 seq = SDPCM_PACKET_SEQUENCE(&dptr[SDPCM_FRAMETAG_LEN]);
1302                 bus->nextlen = dptr[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET];
1303                 if ((bus->nextlen << 4) > MAX_RX_DATASZ) {
1304                         brcmf_dbg(INFO, "nextlen too large (%d) seq %d\n",
1305                                   bus->nextlen, seq);
1306                         bus->nextlen = 0;
1307                 }
1308                 doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
1309                 txmax = SDPCM_WINDOW_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
1310
1311                 errcode = 0;
1312                 if ((u16)~(sublen ^ check)) {
1313                         brcmf_dbg(ERROR, "(superframe): HW hdr error: len/check 0x%04x/0x%04x\n",
1314                                   sublen, check);
1315                         errcode = -1;
1316                 } else if (roundup(sublen, bus->blocksize) != dlen) {
1317                         brcmf_dbg(ERROR, "(superframe): len 0x%04x, rounded 0x%04x, expect 0x%04x\n",
1318                                   sublen, roundup(sublen, bus->blocksize),
1319                                   dlen);
1320                         errcode = -1;
1321                 } else if (SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]) !=
1322                            SDPCM_GLOM_CHANNEL) {
1323                         brcmf_dbg(ERROR, "(superframe): bad channel %d\n",
1324                                   SDPCM_PACKET_CHANNEL(
1325                                           &dptr[SDPCM_FRAMETAG_LEN]));
1326                         errcode = -1;
1327                 } else if (SDPCM_GLOMDESC(&dptr[SDPCM_FRAMETAG_LEN])) {
1328                         brcmf_dbg(ERROR, "(superframe): got 2nd descriptor?\n");
1329                         errcode = -1;
1330                 } else if ((doff < SDPCM_HDRLEN) ||
1331                            (doff > (pfirst->len - SDPCM_HDRLEN))) {
1332                         brcmf_dbg(ERROR, "(superframe): Bad data offset %d: HW %d pkt %d min %d\n",
1333                                   doff, sublen, pfirst->len, SDPCM_HDRLEN);
1334                         errcode = -1;
1335                 }
1336
1337                 /* Check sequence number of superframe SW header */
1338                 if (rxseq != seq) {
1339                         brcmf_dbg(INFO, "(superframe) rx_seq %d, expected %d\n",
1340                                   seq, rxseq);
1341                         bus->rx_badseq++;
1342                         rxseq = seq;
1343                 }
1344
1345                 /* Check window for sanity */
1346                 if ((u8) (txmax - bus->tx_seq) > 0x40) {
1347                         brcmf_dbg(ERROR, "unlikely tx max %d with tx_seq %d\n",
1348                                   txmax, bus->tx_seq);
1349                         txmax = bus->tx_seq + 2;
1350                 }
1351                 bus->tx_max = txmax;
1352
1353                 /* Remove superframe header, remember offset */
1354                 skb_pull(pfirst, doff);
1355                 sfdoff = doff;
1356
1357                 /* Validate all the subframe headers */
1358                 for (num = 0, pnext = pfirst; pnext && !errcode;
1359                      num++, pnext = pnext->next) {
1360                         dptr = (u8 *) (pnext->data);
1361                         dlen = (u16) (pnext->len);
1362                         sublen = get_unaligned_le16(dptr);
1363                         check = get_unaligned_le16(dptr + sizeof(u16));
1364                         chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]);
1365                         doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
1366 #ifdef BCMDBG
1367                         if (BRCMF_GLOM_ON()) {
1368                                 printk(KERN_DEBUG "subframe:\n");
1369                                 print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
1370                                                      dptr, 32);
1371                         }
1372 #endif
1373
1374                         if ((u16)~(sublen ^ check)) {
1375                                 brcmf_dbg(ERROR, "(subframe %d): HW hdr error: len/check 0x%04x/0x%04x\n",
1376                                           num, sublen, check);
1377                                 errcode = -1;
1378                         } else if ((sublen > dlen) || (sublen < SDPCM_HDRLEN)) {
1379                                 brcmf_dbg(ERROR, "(subframe %d): length mismatch: len 0x%04x, expect 0x%04x\n",
1380                                           num, sublen, dlen);
1381                                 errcode = -1;
1382                         } else if ((chan != SDPCM_DATA_CHANNEL) &&
1383                                    (chan != SDPCM_EVENT_CHANNEL)) {
1384                                 brcmf_dbg(ERROR, "(subframe %d): bad channel %d\n",
1385                                           num, chan);
1386                                 errcode = -1;
1387                         } else if ((doff < SDPCM_HDRLEN) || (doff > sublen)) {
1388                                 brcmf_dbg(ERROR, "(subframe %d): Bad data offset %d: HW %d min %d\n",
1389                                           num, doff, sublen, SDPCM_HDRLEN);
1390                                 errcode = -1;
1391                         }
1392                 }
1393
1394                 if (errcode) {
1395                         /* Terminate frame on error, request
1396                                  a couple retries */
1397                         if (bus->glomerr++ < 3) {
1398                                 /* Restore superframe header space */
1399                                 skb_push(pfirst, sfdoff);
1400                                 brcmf_sdbrcm_rxfail(bus, true, true);
1401                         } else {
1402                                 bus->glomerr = 0;
1403                                 brcmf_sdbrcm_rxfail(bus, true, false);
1404                                 bus->rxglomfail++;
1405                                 brcmf_sdbrcm_free_glom(bus);
1406                         }
1407                         bus->nextlen = 0;
1408                         return 0;
1409                 }
1410
1411                 /* Basic SD framing looks ok - process each packet (header) */
1412                 save_pfirst = pfirst;
1413                 plast = NULL;
1414
1415                 for (num = 0; pfirst; rxseq++, pfirst = pnext) {
1416                         pnext = pfirst->next;
1417                         pfirst->next = NULL;
1418
1419                         dptr = (u8 *) (pfirst->data);
1420                         sublen = get_unaligned_le16(dptr);
1421                         chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]);
1422                         seq = SDPCM_PACKET_SEQUENCE(&dptr[SDPCM_FRAMETAG_LEN]);
1423                         doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
1424
1425                         brcmf_dbg(GLOM, "Get subframe %d, %p(%p/%d), sublen %d chan %d seq %d\n",
1426                                   num, pfirst, pfirst->data,
1427                                   pfirst->len, sublen, chan, seq);
1428
1429                         /* precondition: chan == SDPCM_DATA_CHANNEL ||
1430                                          chan == SDPCM_EVENT_CHANNEL */
1431
1432                         if (rxseq != seq) {
1433                                 brcmf_dbg(GLOM, "rx_seq %d, expected %d\n",
1434                                           seq, rxseq);
1435                                 bus->rx_badseq++;
1436                                 rxseq = seq;
1437                         }
1438 #ifdef BCMDBG
1439                         if (BRCMF_BYTES_ON() && BRCMF_DATA_ON()) {
1440                                 printk(KERN_DEBUG "Rx Subframe Data:\n");
1441                                 print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
1442                                                      dptr, dlen);
1443                         }
1444 #endif
1445
1446                         __skb_trim(pfirst, sublen);
1447                         skb_pull(pfirst, doff);
1448
1449                         if (pfirst->len == 0) {
1450                                 brcmu_pkt_buf_free_skb(pfirst);
1451                                 if (plast)
1452                                         plast->next = pnext;
1453                                 else
1454                                         save_pfirst = pnext;
1455
1456                                 continue;
1457                         } else if (brcmf_proto_hdrpull(bus->drvr, &ifidx,
1458                                                        pfirst) != 0) {
1459                                 brcmf_dbg(ERROR, "rx protocol error\n");
1460                                 bus->drvr->rx_errors++;
1461                                 brcmu_pkt_buf_free_skb(pfirst);
1462                                 if (plast)
1463                                         plast->next = pnext;
1464                                 else
1465                                         save_pfirst = pnext;
1466
1467                                 continue;
1468                         }
1469
1470                         /* this packet will go up, link back into
1471                                  chain and count it */
1472                         pfirst->next = pnext;
1473                         plast = pfirst;
1474                         num++;
1475
1476 #ifdef BCMDBG
1477                         if (BRCMF_GLOM_ON()) {
1478                                 brcmf_dbg(GLOM, "subframe %d to stack, %p (%p/%d) nxt/lnk %p/%p\n",
1479                                           num, pfirst, pfirst->data,
1480                                           pfirst->len, pfirst->next,
1481                                           pfirst->prev);
1482                                 print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
1483                                                 pfirst->data,
1484                                                 min_t(int, pfirst->len, 32));
1485                         }
1486 #endif                          /* BCMDBG */
1487                 }
1488                 if (num) {
1489                         up(&bus->sdsem);
1490                         brcmf_rx_frame(bus->drvr, ifidx, save_pfirst, num);
1491                         down(&bus->sdsem);
1492                 }
1493
1494                 bus->rxglomframes++;
1495                 bus->rxglompkts += num;
1496         }
1497         return num;
1498 }
1499
1500 static int brcmf_sdbrcm_dcmd_resp_wait(struct brcmf_bus *bus, uint *condition,
1501                                         bool *pending)
1502 {
1503         DECLARE_WAITQUEUE(wait, current);
1504         int timeout = msecs_to_jiffies(DCMD_RESP_TIMEOUT);
1505
1506         /* Wait until control frame is available */
1507         add_wait_queue(&bus->dcmd_resp_wait, &wait);
1508         set_current_state(TASK_INTERRUPTIBLE);
1509
1510         while (!(*condition) && (!signal_pending(current) && timeout))
1511                 timeout = schedule_timeout(timeout);
1512
1513         if (signal_pending(current))
1514                 *pending = true;
1515
1516         set_current_state(TASK_RUNNING);
1517         remove_wait_queue(&bus->dcmd_resp_wait, &wait);
1518
1519         return timeout;
1520 }
1521
1522 static int brcmf_sdbrcm_dcmd_resp_wake(struct brcmf_bus *bus)
1523 {
1524         if (waitqueue_active(&bus->dcmd_resp_wait))
1525                 wake_up_interruptible(&bus->dcmd_resp_wait);
1526
1527         return 0;
1528 }
1529 static void
1530 brcmf_sdbrcm_read_control(struct brcmf_bus *bus, u8 *hdr, uint len, uint doff)
1531 {
1532         uint rdlen, pad;
1533
1534         int sdret;
1535
1536         brcmf_dbg(TRACE, "Enter\n");
1537
1538         /* Set rxctl for frame (w/optional alignment) */
1539         bus->rxctl = bus->rxbuf;
1540         bus->rxctl += BRCMF_FIRSTREAD;
1541         pad = ((unsigned long)bus->rxctl % BRCMF_SDALIGN);
1542         if (pad)
1543                 bus->rxctl += (BRCMF_SDALIGN - pad);
1544         bus->rxctl -= BRCMF_FIRSTREAD;
1545
1546         /* Copy the already-read portion over */
1547         memcpy(bus->rxctl, hdr, BRCMF_FIRSTREAD);
1548         if (len <= BRCMF_FIRSTREAD)
1549                 goto gotpkt;
1550
1551         /* Raise rdlen to next SDIO block to avoid tail command */
1552         rdlen = len - BRCMF_FIRSTREAD;
1553         if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) {
1554                 pad = bus->blocksize - (rdlen % bus->blocksize);
1555                 if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
1556                     ((len + pad) < bus->drvr->maxctl))
1557                         rdlen += pad;
1558         } else if (rdlen % BRCMF_SDALIGN) {
1559                 rdlen += BRCMF_SDALIGN - (rdlen % BRCMF_SDALIGN);
1560         }
1561
1562         /* Satisfy length-alignment requirements */
1563         if (rdlen & (ALIGNMENT - 1))
1564                 rdlen = roundup(rdlen, ALIGNMENT);
1565
1566         /* Drop if the read is too big or it exceeds our maximum */
1567         if ((rdlen + BRCMF_FIRSTREAD) > bus->drvr->maxctl) {
1568                 brcmf_dbg(ERROR, "%d-byte control read exceeds %d-byte buffer\n",
1569                           rdlen, bus->drvr->maxctl);
1570                 bus->drvr->rx_errors++;
1571                 brcmf_sdbrcm_rxfail(bus, false, false);
1572                 goto done;
1573         }
1574
1575         if ((len - doff) > bus->drvr->maxctl) {
1576                 brcmf_dbg(ERROR, "%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n",
1577                           len, len - doff, bus->drvr->maxctl);
1578                 bus->drvr->rx_errors++;
1579                 bus->rx_toolong++;
1580                 brcmf_sdbrcm_rxfail(bus, false, false);
1581                 goto done;
1582         }
1583
1584         /* Read remainder of frame body into the rxctl buffer */
1585         sdret = brcmf_sdcard_recv_buf(bus->sdiodev,
1586                                 bus->sdiodev->sbwad,
1587                                 SDIO_FUNC_2,
1588                                 F2SYNC, (bus->rxctl + BRCMF_FIRSTREAD), rdlen,
1589                                 NULL);
1590         bus->f2rxdata++;
1591
1592         /* Control frame failures need retransmission */
1593         if (sdret < 0) {
1594                 brcmf_dbg(ERROR, "read %d control bytes failed: %d\n",
1595                           rdlen, sdret);
1596                 bus->rxc_errors++;
1597                 brcmf_sdbrcm_rxfail(bus, true, true);
1598                 goto done;
1599         }
1600
1601 gotpkt:
1602
1603 #ifdef BCMDBG
1604         if (BRCMF_BYTES_ON() && BRCMF_CTL_ON()) {
1605                 printk(KERN_DEBUG "RxCtrl:\n");
1606                 print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, bus->rxctl, len);
1607         }
1608 #endif
1609
1610         /* Point to valid data and indicate its length */
1611         bus->rxctl += doff;
1612         bus->rxlen = len - doff;
1613
1614 done:
1615         /* Awake any waiters */
1616         brcmf_sdbrcm_dcmd_resp_wake(bus);
1617 }
1618
1619 /* Pad read to blocksize for efficiency */
1620 static void brcmf_pad(struct brcmf_bus *bus, u16 *pad, u16 *rdlen)
1621 {
1622         if (bus->roundup && bus->blocksize && *rdlen > bus->blocksize) {
1623                 *pad = bus->blocksize - (*rdlen % bus->blocksize);
1624                 if (*pad <= bus->roundup && *pad < bus->blocksize &&
1625                     *rdlen + *pad + BRCMF_FIRSTREAD < MAX_RX_DATASZ)
1626                         *rdlen += *pad;
1627         } else if (*rdlen % BRCMF_SDALIGN) {
1628                 *rdlen += BRCMF_SDALIGN - (*rdlen % BRCMF_SDALIGN);
1629         }
1630 }
1631
1632 static void
1633 brcmf_alloc_pkt_and_read(struct brcmf_bus *bus, u16 rdlen,
1634                          struct sk_buff **pkt, u8 **rxbuf)
1635 {
1636         int sdret;              /* Return code from calls */
1637
1638         *pkt = brcmu_pkt_buf_get_skb(rdlen + BRCMF_SDALIGN);
1639         if (*pkt == NULL)
1640                 return;
1641
1642         pkt_align(*pkt, rdlen, BRCMF_SDALIGN);
1643         *rxbuf = (u8 *) ((*pkt)->data);
1644         /* Read the entire frame */
1645         sdret = brcmf_sdcard_recv_buf(bus->sdiodev, bus->sdiodev->sbwad,
1646                                       SDIO_FUNC_2, F2SYNC,
1647                                       *rxbuf, rdlen, *pkt);
1648         bus->f2rxdata++;
1649
1650         if (sdret < 0) {
1651                 brcmf_dbg(ERROR, "(nextlen): read %d bytes failed: %d\n",
1652                           rdlen, sdret);
1653                 brcmu_pkt_buf_free_skb(*pkt);
1654                 bus->drvr->rx_errors++;
1655                 /* Force retry w/normal header read.
1656                  * Don't attempt NAK for
1657                  * gSPI
1658                  */
1659                 brcmf_sdbrcm_rxfail(bus, true, true);
1660                 *pkt = NULL;
1661         }
1662 }
1663
1664 /* Checks the header */
1665 static int
1666 brcmf_check_rxbuf(struct brcmf_bus *bus, struct sk_buff *pkt, u8 *rxbuf,
1667                   u8 rxseq, u16 nextlen, u16 *len)
1668 {
1669         u16 check;
1670         bool len_consistent;    /* Result of comparing readahead len and
1671                                    len from hw-hdr */
1672
1673         memcpy(bus->rxhdr, rxbuf, SDPCM_HDRLEN);
1674
1675         /* Extract hardware header fields */
1676         *len = get_unaligned_le16(bus->rxhdr);
1677         check = get_unaligned_le16(bus->rxhdr + sizeof(u16));
1678
1679         /* All zeros means readahead info was bad */
1680         if (!(*len | check)) {
1681                 brcmf_dbg(INFO, "(nextlen): read zeros in HW header???\n");
1682                 goto fail;
1683         }
1684
1685         /* Validate check bytes */
1686         if ((u16)~(*len ^ check)) {
1687                 brcmf_dbg(ERROR, "(nextlen): HW hdr error: nextlen/len/check 0x%04x/0x%04x/0x%04x\n",
1688                           nextlen, *len, check);
1689                 bus->rx_badhdr++;
1690                 brcmf_sdbrcm_rxfail(bus, false, false);
1691                 goto fail;
1692         }
1693
1694         /* Validate frame length */
1695         if (*len < SDPCM_HDRLEN) {
1696                 brcmf_dbg(ERROR, "(nextlen): HW hdr length invalid: %d\n",
1697                           *len);
1698                 goto fail;
1699         }
1700
1701         /* Check for consistency with readahead info */
1702         len_consistent = (nextlen != (roundup(*len, 16) >> 4));
1703         if (len_consistent) {
1704                 /* Mismatch, force retry w/normal
1705                         header (may be >4K) */
1706                 brcmf_dbg(ERROR, "(nextlen): mismatch, nextlen %d len %d rnd %d; expected rxseq %d\n",
1707                           nextlen, *len, roundup(*len, 16),
1708                           rxseq);
1709                 brcmf_sdbrcm_rxfail(bus, true, true);
1710                 goto fail;
1711         }
1712
1713         return 0;
1714
1715 fail:
1716         brcmf_sdbrcm_pktfree2(bus, pkt);
1717         return -EINVAL;
1718 }
1719
1720 /* Return true if there may be more frames to read */
1721 static uint
1722 brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished)
1723 {
1724         u16 len, check; /* Extracted hardware header fields */
1725         u8 chan, seq, doff;     /* Extracted software header fields */
1726         u8 fcbits;              /* Extracted fcbits from software header */
1727
1728         struct sk_buff *pkt;            /* Packet for event or data frames */
1729         u16 pad;                /* Number of pad bytes to read */
1730         u16 rdlen;              /* Total number of bytes to read */
1731         u8 rxseq;               /* Next sequence number to expect */
1732         uint rxleft = 0;        /* Remaining number of frames allowed */
1733         int sdret;              /* Return code from calls */
1734         u8 txmax;               /* Maximum tx sequence offered */
1735         u8 *rxbuf;
1736         int ifidx = 0;
1737         uint rxcount = 0;       /* Total frames read */
1738
1739         brcmf_dbg(TRACE, "Enter\n");
1740
1741         /* Not finished unless we encounter no more frames indication */
1742         *finished = false;
1743
1744         for (rxseq = bus->rx_seq, rxleft = maxframes;
1745              !bus->rxskip && rxleft && bus->drvr->busstate != BRCMF_BUS_DOWN;
1746              rxseq++, rxleft--) {
1747
1748                 /* Handle glomming separately */
1749                 if (bus->glomd || !skb_queue_empty(&bus->glom)) {
1750                         u8 cnt;
1751                         brcmf_dbg(GLOM, "calling rxglom: glomd %p, glom %p\n",
1752                                   bus->glomd, skb_peek(&bus->glom));
1753                         cnt = brcmf_sdbrcm_rxglom(bus, rxseq);
1754                         brcmf_dbg(GLOM, "rxglom returned %d\n", cnt);
1755                         rxseq += cnt - 1;
1756                         rxleft = (rxleft > cnt) ? (rxleft - cnt) : 1;
1757                         continue;
1758                 }
1759
1760                 /* Try doing single read if we can */
1761                 if (bus->nextlen) {
1762                         u16 nextlen = bus->nextlen;
1763                         bus->nextlen = 0;
1764
1765                         rdlen = len = nextlen << 4;
1766                         brcmf_pad(bus, &pad, &rdlen);
1767
1768                         /*
1769                          * After the frame is received we have to
1770                          * distinguish whether it is data
1771                          * or non-data frame.
1772                          */
1773                         brcmf_alloc_pkt_and_read(bus, rdlen, &pkt, &rxbuf);
1774                         if (pkt == NULL) {
1775                                 /* Give up on data, request rtx of events */
1776                                 brcmf_dbg(ERROR, "(nextlen): brcmf_alloc_pkt_and_read failed: len %d rdlen %d expected rxseq %d\n",
1777                                           len, rdlen, rxseq);
1778                                 continue;
1779                         }
1780
1781                         if (brcmf_check_rxbuf(bus, pkt, rxbuf, rxseq, nextlen,
1782                                               &len) < 0)
1783                                 continue;
1784
1785                         /* Extract software header fields */
1786                         chan = SDPCM_PACKET_CHANNEL(
1787                                         &bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1788                         seq = SDPCM_PACKET_SEQUENCE(
1789                                         &bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1790                         doff = SDPCM_DOFFSET_VALUE(
1791                                         &bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1792                         txmax = SDPCM_WINDOW_VALUE(
1793                                         &bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1794
1795                         bus->nextlen =
1796                             bus->rxhdr[SDPCM_FRAMETAG_LEN +
1797                                        SDPCM_NEXTLEN_OFFSET];
1798                         if ((bus->nextlen << 4) > MAX_RX_DATASZ) {
1799                                 brcmf_dbg(INFO, "(nextlen): got frame w/nextlen too large (%d), seq %d\n",
1800                                           bus->nextlen, seq);
1801                                 bus->nextlen = 0;
1802                         }
1803
1804                         bus->drvr->rx_readahead_cnt++;
1805
1806                         /* Handle Flow Control */
1807                         fcbits = SDPCM_FCMASK_VALUE(
1808                                         &bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1809
1810                         if (bus->flowcontrol != fcbits) {
1811                                 if (~bus->flowcontrol & fcbits)
1812                                         bus->fc_xoff++;
1813
1814                                 if (bus->flowcontrol & ~fcbits)
1815                                         bus->fc_xon++;
1816
1817                                 bus->fc_rcvd++;
1818                                 bus->flowcontrol = fcbits;
1819                         }
1820
1821                         /* Check and update sequence number */
1822                         if (rxseq != seq) {
1823                                 brcmf_dbg(INFO, "(nextlen): rx_seq %d, expected %d\n",
1824                                           seq, rxseq);
1825                                 bus->rx_badseq++;
1826                                 rxseq = seq;
1827                         }
1828
1829                         /* Check window for sanity */
1830                         if ((u8) (txmax - bus->tx_seq) > 0x40) {
1831                                 brcmf_dbg(ERROR, "got unlikely tx max %d with tx_seq %d\n",
1832                                           txmax, bus->tx_seq);
1833                                 txmax = bus->tx_seq + 2;
1834                         }
1835                         bus->tx_max = txmax;
1836
1837 #ifdef BCMDBG
1838                         if (BRCMF_BYTES_ON() && BRCMF_DATA_ON()) {
1839                                 printk(KERN_DEBUG "Rx Data:\n");
1840                                 print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
1841                                                      rxbuf, len);
1842                         } else if (BRCMF_HDRS_ON()) {
1843                                 printk(KERN_DEBUG "RxHdr:\n");
1844                                 print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
1845                                                      bus->rxhdr, SDPCM_HDRLEN);
1846                         }
1847 #endif
1848
1849                         if (chan == SDPCM_CONTROL_CHANNEL) {
1850                                 brcmf_dbg(ERROR, "(nextlen): readahead on control packet %d?\n",
1851                                           seq);
1852                                 /* Force retry w/normal header read */
1853                                 bus->nextlen = 0;
1854                                 brcmf_sdbrcm_rxfail(bus, false, true);
1855                                 brcmf_sdbrcm_pktfree2(bus, pkt);
1856                                 continue;
1857                         }
1858
1859                         /* Validate data offset */
1860                         if ((doff < SDPCM_HDRLEN) || (doff > len)) {
1861                                 brcmf_dbg(ERROR, "(nextlen): bad data offset %d: HW len %d min %d\n",
1862                                           doff, len, SDPCM_HDRLEN);
1863                                 brcmf_sdbrcm_rxfail(bus, false, false);
1864                                 brcmf_sdbrcm_pktfree2(bus, pkt);
1865                                 continue;
1866                         }
1867
1868                         /* All done with this one -- now deliver the packet */
1869                         goto deliver;
1870                 }
1871
1872                 /* Read frame header (hardware and software) */
1873                 sdret = brcmf_sdcard_recv_buf(bus->sdiodev, bus->sdiodev->sbwad,
1874                                               SDIO_FUNC_2, F2SYNC, bus->rxhdr,
1875                                               BRCMF_FIRSTREAD, NULL);
1876                 bus->f2rxhdrs++;
1877
1878                 if (sdret < 0) {
1879                         brcmf_dbg(ERROR, "RXHEADER FAILED: %d\n", sdret);
1880                         bus->rx_hdrfail++;
1881                         brcmf_sdbrcm_rxfail(bus, true, true);
1882                         continue;
1883                 }
1884 #ifdef BCMDBG
1885                 if (BRCMF_BYTES_ON() || BRCMF_HDRS_ON()) {
1886                         printk(KERN_DEBUG "RxHdr:\n");
1887                         print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
1888                                              bus->rxhdr, SDPCM_HDRLEN);
1889                 }
1890 #endif
1891
1892                 /* Extract hardware header fields */
1893                 len = get_unaligned_le16(bus->rxhdr);
1894                 check = get_unaligned_le16(bus->rxhdr + sizeof(u16));
1895
1896                 /* All zeros means no more frames */
1897                 if (!(len | check)) {
1898                         *finished = true;
1899                         break;
1900                 }
1901
1902                 /* Validate check bytes */
1903                 if ((u16) ~(len ^ check)) {
1904                         brcmf_dbg(ERROR, "HW hdr err: len/check 0x%04x/0x%04x\n",
1905                                   len, check);
1906                         bus->rx_badhdr++;
1907                         brcmf_sdbrcm_rxfail(bus, false, false);
1908                         continue;
1909                 }
1910
1911                 /* Validate frame length */
1912                 if (len < SDPCM_HDRLEN) {
1913                         brcmf_dbg(ERROR, "HW hdr length invalid: %d\n", len);
1914                         continue;
1915                 }
1916
1917                 /* Extract software header fields */
1918                 chan = SDPCM_PACKET_CHANNEL(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1919                 seq = SDPCM_PACKET_SEQUENCE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1920                 doff = SDPCM_DOFFSET_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1921                 txmax = SDPCM_WINDOW_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1922
1923                 /* Validate data offset */
1924                 if ((doff < SDPCM_HDRLEN) || (doff > len)) {
1925                         brcmf_dbg(ERROR, "Bad data offset %d: HW len %d, min %d seq %d\n",
1926                                   doff, len, SDPCM_HDRLEN, seq);
1927                         bus->rx_badhdr++;
1928                         brcmf_sdbrcm_rxfail(bus, false, false);
1929                         continue;
1930                 }
1931
1932                 /* Save the readahead length if there is one */
1933                 bus->nextlen =
1934                     bus->rxhdr[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET];
1935                 if ((bus->nextlen << 4) > MAX_RX_DATASZ) {
1936                         brcmf_dbg(INFO, "(nextlen): got frame w/nextlen too large (%d), seq %d\n",
1937                                   bus->nextlen, seq);
1938                         bus->nextlen = 0;
1939                 }
1940
1941                 /* Handle Flow Control */
1942                 fcbits = SDPCM_FCMASK_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
1943
1944                 if (bus->flowcontrol != fcbits) {
1945                         if (~bus->flowcontrol & fcbits)
1946                                 bus->fc_xoff++;
1947
1948                         if (bus->flowcontrol & ~fcbits)
1949                                 bus->fc_xon++;
1950
1951                         bus->fc_rcvd++;
1952                         bus->flowcontrol = fcbits;
1953                 }
1954
1955                 /* Check and update sequence number */
1956                 if (rxseq != seq) {
1957                         brcmf_dbg(INFO, "rx_seq %d, expected %d\n", seq, rxseq);
1958                         bus->rx_badseq++;
1959                         rxseq = seq;
1960                 }
1961
1962                 /* Check window for sanity */
1963                 if ((u8) (txmax - bus->tx_seq) > 0x40) {
1964                         brcmf_dbg(ERROR, "unlikely tx max %d with tx_seq %d\n",
1965                                   txmax, bus->tx_seq);
1966                         txmax = bus->tx_seq + 2;
1967                 }
1968                 bus->tx_max = txmax;
1969
1970                 /* Call a separate function for control frames */
1971                 if (chan == SDPCM_CONTROL_CHANNEL) {
1972                         brcmf_sdbrcm_read_control(bus, bus->rxhdr, len, doff);
1973                         continue;
1974                 }
1975
1976                 /* precondition: chan is either SDPCM_DATA_CHANNEL,
1977                    SDPCM_EVENT_CHANNEL, SDPCM_TEST_CHANNEL or
1978                    SDPCM_GLOM_CHANNEL */
1979
1980                 /* Length to read */
1981                 rdlen = (len > BRCMF_FIRSTREAD) ? (len - BRCMF_FIRSTREAD) : 0;
1982
1983                 /* May pad read to blocksize for efficiency */
1984                 if (bus->roundup && bus->blocksize &&
1985                         (rdlen > bus->blocksize)) {
1986                         pad = bus->blocksize - (rdlen % bus->blocksize);
1987                         if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
1988                             ((rdlen + pad + BRCMF_FIRSTREAD) < MAX_RX_DATASZ))
1989                                 rdlen += pad;
1990                 } else if (rdlen % BRCMF_SDALIGN) {
1991                         rdlen += BRCMF_SDALIGN - (rdlen % BRCMF_SDALIGN);
1992                 }
1993
1994                 /* Satisfy length-alignment requirements */
1995                 if (rdlen & (ALIGNMENT - 1))
1996                         rdlen = roundup(rdlen, ALIGNMENT);
1997
1998                 if ((rdlen + BRCMF_FIRSTREAD) > MAX_RX_DATASZ) {
1999                         /* Too long -- skip this frame */
2000                         brcmf_dbg(ERROR, "too long: len %d rdlen %d\n",
2001                                   len, rdlen);
2002                         bus->drvr->rx_errors++;
2003                         bus->rx_toolong++;
2004                         brcmf_sdbrcm_rxfail(bus, false, false);
2005                         continue;
2006                 }
2007
2008                 pkt = brcmu_pkt_buf_get_skb(rdlen +
2009                                             BRCMF_FIRSTREAD + BRCMF_SDALIGN);
2010                 if (!pkt) {
2011                         /* Give up on data, request rtx of events */
2012                         brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: rdlen %d chan %d\n",
2013                                   rdlen, chan);
2014                         bus->drvr->rx_dropped++;
2015                         brcmf_sdbrcm_rxfail(bus, false, RETRYCHAN(chan));
2016                         continue;
2017                 }
2018
2019                 /* Leave room for what we already read, and align remainder */
2020                 skb_pull(pkt, BRCMF_FIRSTREAD);
2021                 pkt_align(pkt, rdlen, BRCMF_SDALIGN);
2022
2023                 /* Read the remaining frame data */
2024                 sdret = brcmf_sdcard_recv_buf(bus->sdiodev, bus->sdiodev->sbwad,
2025                                 SDIO_FUNC_2, F2SYNC, ((u8 *) (pkt->data)),
2026                                 rdlen, pkt);
2027                 bus->f2rxdata++;
2028
2029                 if (sdret < 0) {
2030                         brcmf_dbg(ERROR, "read %d %s bytes failed: %d\n", rdlen,
2031                                   ((chan == SDPCM_EVENT_CHANNEL) ? "event"
2032                                    : ((chan == SDPCM_DATA_CHANNEL) ? "data"
2033                                       : "test")), sdret);
2034                         brcmu_pkt_buf_free_skb(pkt);
2035                         bus->drvr->rx_errors++;
2036                         brcmf_sdbrcm_rxfail(bus, true, RETRYCHAN(chan));
2037                         continue;
2038                 }
2039
2040                 /* Copy the already-read portion */
2041                 skb_push(pkt, BRCMF_FIRSTREAD);
2042                 memcpy(pkt->data, bus->rxhdr, BRCMF_FIRSTREAD);
2043
2044 #ifdef BCMDBG
2045                 if (BRCMF_BYTES_ON() && BRCMF_DATA_ON()) {
2046                         printk(KERN_DEBUG "Rx Data:\n");
2047                         print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
2048                                              pkt->data, len);
2049                 }
2050 #endif
2051
2052 deliver:
2053                 /* Save superframe descriptor and allocate packet frame */
2054                 if (chan == SDPCM_GLOM_CHANNEL) {
2055                         if (SDPCM_GLOMDESC(&bus->rxhdr[SDPCM_FRAMETAG_LEN])) {
2056                                 brcmf_dbg(GLOM, "glom descriptor, %d bytes:\n",
2057                                           len);
2058 #ifdef BCMDBG
2059                                 if (BRCMF_GLOM_ON()) {
2060                                         printk(KERN_DEBUG "Glom Data:\n");
2061                                         print_hex_dump_bytes("",
2062                                                              DUMP_PREFIX_OFFSET,
2063                                                              pkt->data, len);
2064                                 }
2065 #endif
2066                                 __skb_trim(pkt, len);
2067                                 skb_pull(pkt, SDPCM_HDRLEN);
2068                                 bus->glomd = pkt;
2069                         } else {
2070                                 brcmf_dbg(ERROR, "%s: glom superframe w/o "
2071                                           "descriptor!\n", __func__);
2072                                 brcmf_sdbrcm_rxfail(bus, false, false);
2073                         }
2074                         continue;
2075                 }
2076
2077                 /* Fill in packet len and prio, deliver upward */
2078                 __skb_trim(pkt, len);
2079                 skb_pull(pkt, doff);
2080
2081                 if (pkt->len == 0) {
2082                         brcmu_pkt_buf_free_skb(pkt);
2083                         continue;
2084                 } else if (brcmf_proto_hdrpull(bus->drvr, &ifidx, pkt) != 0) {
2085                         brcmf_dbg(ERROR, "rx protocol error\n");
2086                         brcmu_pkt_buf_free_skb(pkt);
2087                         bus->drvr->rx_errors++;
2088                         continue;
2089                 }
2090
2091                 /* Unlock during rx call */
2092                 up(&bus->sdsem);
2093                 brcmf_rx_frame(bus->drvr, ifidx, pkt, 1);
2094                 down(&bus->sdsem);
2095         }
2096         rxcount = maxframes - rxleft;
2097 #ifdef BCMDBG
2098         /* Message if we hit the limit */
2099         if (!rxleft)
2100                 brcmf_dbg(DATA, "hit rx limit of %d frames\n",
2101                           maxframes);
2102         else
2103 #endif                          /* BCMDBG */
2104                 brcmf_dbg(DATA, "processed %d frames\n", rxcount);
2105         /* Back off rxseq if awaiting rtx, update rx_seq */
2106         if (bus->rxskip)
2107                 rxseq--;
2108         bus->rx_seq = rxseq;
2109
2110         return rxcount;
2111 }
2112
2113 static int
2114 brcmf_sdbrcm_send_buf(struct brcmf_bus *bus, u32 addr, uint fn, uint flags,
2115                     u8 *buf, uint nbytes, struct sk_buff *pkt)
2116 {
2117         return brcmf_sdcard_send_buf
2118                 (bus->sdiodev, addr, fn, flags, buf, nbytes, pkt);
2119 }
2120
2121 static void
2122 brcmf_sdbrcm_wait_for_event(struct brcmf_bus *bus, bool *lockvar)
2123 {
2124         up(&bus->sdsem);
2125         wait_event_interruptible_timeout(bus->ctrl_wait,
2126                                          (*lockvar == false), HZ * 2);
2127         down(&bus->sdsem);
2128         return;
2129 }
2130
2131 static void
2132 brcmf_sdbrcm_wait_event_wakeup(struct brcmf_bus *bus)
2133 {
2134         if (waitqueue_active(&bus->ctrl_wait))
2135                 wake_up_interruptible(&bus->ctrl_wait);
2136         return;
2137 }
2138
2139 /* Writes a HW/SW header into the packet and sends it. */
2140 /* Assumes: (a) header space already there, (b) caller holds lock */
2141 static int brcmf_sdbrcm_txpkt(struct brcmf_bus *bus, struct sk_buff *pkt,
2142                               uint chan, bool free_pkt)
2143 {
2144         int ret;
2145         u8 *frame;
2146         u16 len, pad = 0;
2147         u32 swheader;
2148         struct sk_buff *new;
2149         int i;
2150
2151         brcmf_dbg(TRACE, "Enter\n");
2152
2153         frame = (u8 *) (pkt->data);
2154
2155         /* Add alignment padding, allocate new packet if needed */
2156         pad = ((unsigned long)frame % BRCMF_SDALIGN);
2157         if (pad) {
2158                 if (skb_headroom(pkt) < pad) {
2159                         brcmf_dbg(INFO, "insufficient headroom %d for %d pad\n",
2160                                   skb_headroom(pkt), pad);
2161                         bus->drvr->tx_realloc++;
2162                         new = brcmu_pkt_buf_get_skb(pkt->len + BRCMF_SDALIGN);
2163                         if (!new) {
2164                                 brcmf_dbg(ERROR, "couldn't allocate new %d-byte packet\n",
2165                                           pkt->len + BRCMF_SDALIGN);
2166                                 ret = -ENOMEM;
2167                                 goto done;
2168                         }
2169
2170                         pkt_align(new, pkt->len, BRCMF_SDALIGN);
2171                         memcpy(new->data, pkt->data, pkt->len);
2172                         if (free_pkt)
2173                                 brcmu_pkt_buf_free_skb(pkt);
2174                         /* free the pkt if canned one is not used */
2175                         free_pkt = true;
2176                         pkt = new;
2177                         frame = (u8 *) (pkt->data);
2178                         /* precondition: (frame % BRCMF_SDALIGN) == 0) */
2179                         pad = 0;
2180                 } else {
2181                         skb_push(pkt, pad);
2182                         frame = (u8 *) (pkt->data);
2183                         /* precondition: pad + SDPCM_HDRLEN <= pkt->len */
2184                         memset(frame, 0, pad + SDPCM_HDRLEN);
2185                 }
2186         }
2187         /* precondition: pad < BRCMF_SDALIGN */
2188
2189         /* Hardware tag: 2 byte len followed by 2 byte ~len check (all LE) */
2190         len = (u16) (pkt->len);
2191         *(__le16 *) frame = cpu_to_le16(len);
2192         *(((__le16 *) frame) + 1) = cpu_to_le16(~len);
2193
2194         /* Software tag: channel, sequence number, data offset */
2195         swheader =
2196             ((chan << SDPCM_CHANNEL_SHIFT) & SDPCM_CHANNEL_MASK) | bus->tx_seq |
2197             (((pad +
2198                SDPCM_HDRLEN) << SDPCM_DOFFSET_SHIFT) & SDPCM_DOFFSET_MASK);
2199
2200         put_unaligned_le32(swheader, frame + SDPCM_FRAMETAG_LEN);
2201         put_unaligned_le32(0, frame + SDPCM_FRAMETAG_LEN + sizeof(swheader));
2202
2203 #ifdef BCMDBG
2204         tx_packets[pkt->priority]++;
2205         if (BRCMF_BYTES_ON() &&
2206             (((BRCMF_CTL_ON() && (chan == SDPCM_CONTROL_CHANNEL)) ||
2207               (BRCMF_DATA_ON() && (chan != SDPCM_CONTROL_CHANNEL))))) {
2208                 printk(KERN_DEBUG "Tx Frame:\n");
2209                 print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, frame, len);
2210         } else if (BRCMF_HDRS_ON()) {
2211                 printk(KERN_DEBUG "TxHdr:\n");
2212                 print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
2213                                      frame, min_t(u16, len, 16));
2214         }
2215 #endif
2216
2217         /* Raise len to next SDIO block to eliminate tail command */
2218         if (bus->roundup && bus->blocksize && (len > bus->blocksize)) {
2219                 u16 pad = bus->blocksize - (len % bus->blocksize);
2220                 if ((pad <= bus->roundup) && (pad < bus->blocksize))
2221                                 len += pad;
2222         } else if (len % BRCMF_SDALIGN) {
2223                 len += BRCMF_SDALIGN - (len % BRCMF_SDALIGN);
2224         }
2225
2226         /* Some controllers have trouble with odd bytes -- round to even */
2227         if (len & (ALIGNMENT - 1))
2228                         len = roundup(len, ALIGNMENT);
2229
2230         ret = brcmf_sdbrcm_send_buf(bus, bus->sdiodev->sbwad,
2231                                     SDIO_FUNC_2, F2SYNC, frame,
2232                                     len, pkt);
2233         bus->f2txdata++;
2234
2235         if (ret < 0) {
2236                 /* On failure, abort the command and terminate the frame */
2237                 brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
2238                           ret);
2239                 bus->tx_sderrs++;
2240
2241                 brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
2242                 brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
2243                                  SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM,
2244                                  NULL);
2245                 bus->f1regdata++;
2246
2247                 for (i = 0; i < 3; i++) {
2248                         u8 hi, lo;
2249                         hi = brcmf_sdcard_cfg_read(bus->sdiodev,
2250                                              SDIO_FUNC_1,
2251                                              SBSDIO_FUNC1_WFRAMEBCHI,
2252                                              NULL);
2253                         lo = brcmf_sdcard_cfg_read(bus->sdiodev,
2254                                              SDIO_FUNC_1,
2255                                              SBSDIO_FUNC1_WFRAMEBCLO,
2256                                              NULL);
2257                         bus->f1regdata += 2;
2258                         if ((hi == 0) && (lo == 0))
2259                                 break;
2260                 }
2261
2262         }
2263         if (ret == 0)
2264                 bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
2265
2266 done:
2267         /* restore pkt buffer pointer before calling tx complete routine */
2268         skb_pull(pkt, SDPCM_HDRLEN + pad);
2269         up(&bus->sdsem);
2270         brcmf_txcomplete(bus->drvr, pkt, ret != 0);
2271         down(&bus->sdsem);
2272
2273         if (free_pkt)
2274                 brcmu_pkt_buf_free_skb(pkt);
2275
2276         return ret;
2277 }
2278
2279 static uint brcmf_sdbrcm_sendfromq(struct brcmf_bus *bus, uint maxframes)
2280 {
2281         struct sk_buff *pkt;
2282         u32 intstatus = 0;
2283         uint retries = 0;
2284         int ret = 0, prec_out;
2285         uint cnt = 0;
2286         uint datalen;
2287         u8 tx_prec_map;
2288
2289         struct brcmf_pub *drvr = bus->drvr;
2290
2291         brcmf_dbg(TRACE, "Enter\n");
2292
2293         tx_prec_map = ~bus->flowcontrol;
2294
2295         /* Send frames until the limit or some other event */
2296         for (cnt = 0; (cnt < maxframes) && data_ok(bus); cnt++) {
2297                 spin_lock_bh(&bus->txqlock);
2298                 pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map, &prec_out);
2299                 if (pkt == NULL) {
2300                         spin_unlock_bh(&bus->txqlock);
2301                         break;
2302                 }
2303                 spin_unlock_bh(&bus->txqlock);
2304                 datalen = pkt->len - SDPCM_HDRLEN;
2305
2306                 ret = brcmf_sdbrcm_txpkt(bus, pkt, SDPCM_DATA_CHANNEL, true);
2307                 if (ret)
2308                         bus->drvr->tx_errors++;
2309                 else
2310                         bus->drvr->dstats.tx_bytes += datalen;
2311
2312                 /* In poll mode, need to check for other events */
2313                 if (!bus->intr && cnt) {
2314                         /* Check device status, signal pending interrupt */
2315                         r_sdreg32(bus, &intstatus,
2316                                   offsetof(struct sdpcmd_regs, intstatus),
2317                                   &retries);
2318                         bus->f2txdata++;
2319                         if (brcmf_sdcard_regfail(bus->sdiodev))
2320                                 break;
2321                         if (intstatus & bus->hostintmask)
2322                                 bus->ipend = true;
2323                 }
2324         }
2325
2326         /* Deflow-control stack if needed */
2327         if (drvr->up && (drvr->busstate == BRCMF_BUS_DATA) &&
2328             drvr->txoff && (pktq_len(&bus->txq) < TXLOW))
2329                 brcmf_txflowcontrol(drvr, 0, OFF);
2330
2331         return cnt;
2332 }
2333
2334 static bool brcmf_sdbrcm_dpc(struct brcmf_bus *bus)
2335 {
2336         u32 intstatus, newstatus = 0;
2337         uint retries = 0;
2338         uint rxlimit = bus->rxbound;    /* Rx frames to read before resched */
2339         uint txlimit = bus->txbound;    /* Tx frames to send before resched */
2340         uint framecnt = 0;      /* Temporary counter of tx/rx frames */
2341         bool rxdone = true;     /* Flag for no more read data */
2342         bool resched = false;   /* Flag indicating resched wanted */
2343
2344         brcmf_dbg(TRACE, "Enter\n");
2345
2346         /* Start with leftover status bits */
2347         intstatus = bus->intstatus;
2348
2349         down(&bus->sdsem);
2350
2351         /* If waiting for HTAVAIL, check status */
2352         if (bus->clkstate == CLK_PENDING) {
2353                 int err;
2354                 u8 clkctl, devctl = 0;
2355
2356 #ifdef BCMDBG
2357                 /* Check for inconsistent device control */
2358                 devctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
2359                                                SBSDIO_DEVICE_CTL, &err);
2360                 if (err) {
2361                         brcmf_dbg(ERROR, "error reading DEVCTL: %d\n", err);
2362                         bus->drvr->busstate = BRCMF_BUS_DOWN;
2363                 }
2364 #endif                          /* BCMDBG */
2365
2366                 /* Read CSR, if clock on switch to AVAIL, else ignore */
2367                 clkctl = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
2368                                                SBSDIO_FUNC1_CHIPCLKCSR, &err);
2369                 if (err) {
2370                         brcmf_dbg(ERROR, "error reading CSR: %d\n",
2371                                   err);
2372                         bus->drvr->busstate = BRCMF_BUS_DOWN;
2373                 }
2374
2375                 brcmf_dbg(INFO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n",
2376                           devctl, clkctl);
2377
2378                 if (SBSDIO_HTAV(clkctl)) {
2379                         devctl = brcmf_sdcard_cfg_read(bus->sdiodev,
2380                                                        SDIO_FUNC_1,
2381                                                        SBSDIO_DEVICE_CTL, &err);
2382                         if (err) {
2383                                 brcmf_dbg(ERROR, "error reading DEVCTL: %d\n",
2384                                           err);
2385                                 bus->drvr->busstate = BRCMF_BUS_DOWN;
2386                         }
2387                         devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
2388                         brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
2389                                 SBSDIO_DEVICE_CTL, devctl, &err);
2390                         if (err) {
2391                                 brcmf_dbg(ERROR, "error writing DEVCTL: %d\n",
2392                                           err);
2393                                 bus->drvr->busstate = BRCMF_BUS_DOWN;
2394                         }
2395                         bus->clkstate = CLK_AVAIL;
2396                 } else {
2397                         goto clkwait;
2398                 }
2399         }
2400
2401         bus_wake(bus);
2402
2403         /* Make sure backplane clock is on */
2404         brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, true);
2405         if (bus->clkstate == CLK_PENDING)
2406                 goto clkwait;
2407
2408         /* Pending interrupt indicates new device status */
2409         if (bus->ipend) {
2410                 bus->ipend = false;
2411                 r_sdreg32(bus, &newstatus,
2412                           offsetof(struct sdpcmd_regs, intstatus), &retries);
2413                 bus->f1regdata++;
2414                 if (brcmf_sdcard_regfail(bus->sdiodev))
2415                         newstatus = 0;
2416                 newstatus &= bus->hostintmask;
2417                 bus->fcstate = !!(newstatus & I_HMB_FC_STATE);
2418                 if (newstatus) {
2419                         w_sdreg32(bus, newstatus,
2420                                   offsetof(struct sdpcmd_regs, intstatus),
2421                                   &retries);
2422                         bus->f1regdata++;
2423                 }
2424         }
2425
2426         /* Merge new bits with previous */
2427         intstatus |= newstatus;
2428         bus->intstatus = 0;
2429
2430         /* Handle flow-control change: read new state in case our ack
2431          * crossed another change interrupt.  If change still set, assume
2432          * FC ON for safety, let next loop through do the debounce.
2433          */
2434         if (intstatus & I_HMB_FC_CHANGE) {
2435                 intstatus &= ~I_HMB_FC_CHANGE;
2436                 w_sdreg32(bus, I_HMB_FC_CHANGE,
2437                           offsetof(struct sdpcmd_regs, intstatus), &retries);
2438
2439                 r_sdreg32(bus, &newstatus,
2440                           offsetof(struct sdpcmd_regs, intstatus), &retries);
2441                 bus->f1regdata += 2;
2442                 bus->fcstate =
2443                     !!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE));
2444                 intstatus |= (newstatus & bus->hostintmask);
2445         }
2446
2447         /* Handle host mailbox indication */
2448         if (intstatus & I_HMB_HOST_INT) {
2449                 intstatus &= ~I_HMB_HOST_INT;
2450                 intstatus |= brcmf_sdbrcm_hostmail(bus);
2451         }
2452
2453         /* Generally don't ask for these, can get CRC errors... */
2454         if (intstatus & I_WR_OOSYNC) {
2455                 brcmf_dbg(ERROR, "Dongle reports WR_OOSYNC\n");
2456                 intstatus &= ~I_WR_OOSYNC;
2457         }
2458
2459         if (intstatus & I_RD_OOSYNC) {
2460                 brcmf_dbg(ERROR, "Dongle reports RD_OOSYNC\n");
2461                 intstatus &= ~I_RD_OOSYNC;
2462         }
2463
2464         if (intstatus & I_SBINT) {
2465                 brcmf_dbg(ERROR, "Dongle reports SBINT\n");
2466                 intstatus &= ~I_SBINT;
2467         }
2468
2469         /* Would be active due to wake-wlan in gSPI */
2470         if (intstatus & I_CHIPACTIVE) {
2471                 brcmf_dbg(INFO, "Dongle reports CHIPACTIVE\n");
2472                 intstatus &= ~I_CHIPACTIVE;
2473         }
2474
2475         /* Ignore frame indications if rxskip is set */
2476         if (bus->rxskip)
2477                 intstatus &= ~I_HMB_FRAME_IND;
2478
2479         /* On frame indication, read available frames */
2480         if (PKT_AVAILABLE()) {
2481                 framecnt = brcmf_sdbrcm_readframes(bus, rxlimit, &rxdone);
2482                 if (rxdone || bus->rxskip)
2483                         intstatus &= ~I_HMB_FRAME_IND;
2484                 rxlimit -= min(framecnt, rxlimit);
2485         }
2486
2487         /* Keep still-pending events for next scheduling */
2488         bus->intstatus = intstatus;
2489
2490 clkwait:
2491         if (data_ok(bus) && bus->ctrl_frame_stat &&
2492                 (bus->clkstate == CLK_AVAIL)) {
2493                 int ret, i;
2494
2495                 ret = brcmf_sdbrcm_send_buf(bus, bus->sdiodev->sbwad,
2496                         SDIO_FUNC_2, F2SYNC, (u8 *) bus->ctrl_frame_buf,
2497                         (u32) bus->ctrl_frame_len, NULL);
2498
2499                 if (ret < 0) {
2500                         /* On failure, abort the command and
2501                                 terminate the frame */
2502                         brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
2503                                   ret);
2504                         bus->tx_sderrs++;
2505
2506                         brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
2507
2508                         brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
2509                                          SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM,
2510                                          NULL);
2511                         bus->f1regdata++;
2512
2513                         for (i = 0; i < 3; i++) {
2514                                 u8 hi, lo;
2515                                 hi = brcmf_sdcard_cfg_read(bus->sdiodev,
2516                                                      SDIO_FUNC_1,
2517                                                      SBSDIO_FUNC1_WFRAMEBCHI,
2518                                                      NULL);
2519                                 lo = brcmf_sdcard_cfg_read(bus->sdiodev,
2520                                                      SDIO_FUNC_1,
2521                                                      SBSDIO_FUNC1_WFRAMEBCLO,
2522                                                      NULL);
2523                                 bus->f1regdata += 2;
2524                                 if ((hi == 0) && (lo == 0))
2525                                         break;
2526                         }
2527
2528                 }
2529                 if (ret == 0)
2530                         bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
2531
2532                 brcmf_dbg(INFO, "Return_dpc value is : %d\n", ret);
2533                 bus->ctrl_frame_stat = false;
2534                 brcmf_sdbrcm_wait_event_wakeup(bus);
2535         }
2536         /* Send queued frames (limit 1 if rx may still be pending) */
2537         else if ((bus->clkstate == CLK_AVAIL) && !bus->fcstate &&
2538                  brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit
2539                  && data_ok(bus)) {
2540                 framecnt = rxdone ? txlimit : min(txlimit, bus->txminmax);
2541                 framecnt = brcmf_sdbrcm_sendfromq(bus, framecnt);
2542                 txlimit -= framecnt;
2543         }
2544
2545         /* Resched if events or tx frames are pending,
2546                  else await next interrupt */
2547         /* On failed register access, all bets are off:
2548                  no resched or interrupts */
2549         if ((bus->drvr->busstate == BRCMF_BUS_DOWN) ||
2550             brcmf_sdcard_regfail(bus->sdiodev)) {
2551                 brcmf_dbg(ERROR, "failed backplane access over SDIO, halting operation %d\n",
2552                           brcmf_sdcard_regfail(bus->sdiodev));
2553                 bus->drvr->busstate = BRCMF_BUS_DOWN;
2554                 bus->intstatus = 0;
2555         } else if (bus->clkstate == CLK_PENDING) {
2556                 brcmf_dbg(INFO, "rescheduled due to CLK_PENDING awaiting I_CHIPACTIVE interrupt\n");
2557                 resched = true;
2558         } else if (bus->intstatus || bus->ipend ||
2559                 (!bus->fcstate && brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol)
2560                  && data_ok(bus)) || PKT_AVAILABLE()) {
2561                 resched = true;
2562         }
2563
2564         bus->dpc_sched = resched;
2565
2566         /* If we're done for now, turn off clock request. */
2567         if ((bus->clkstate != CLK_PENDING)
2568             && bus->idletime == BRCMF_IDLE_IMMEDIATE) {
2569                 bus->activity = false;
2570                 brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
2571         }
2572
2573         up(&bus->sdsem);
2574
2575         return resched;
2576 }
2577
2578 static int brcmf_sdbrcm_dpc_thread(void *data)
2579 {
2580         struct brcmf_bus *bus = (struct brcmf_bus *) data;
2581
2582         allow_signal(SIGTERM);
2583         /* Run until signal received */
2584         while (1) {
2585                 if (kthread_should_stop())
2586                         break;
2587                 if (!wait_for_completion_interruptible(&bus->dpc_wait)) {
2588                         /* Call bus dpc unless it indicated down
2589                         (then clean stop) */
2590                         if (bus->drvr->busstate != BRCMF_BUS_DOWN) {
2591                                 if (brcmf_sdbrcm_dpc(bus))
2592                                         complete(&bus->dpc_wait);
2593                         } else {
2594                                 /* after stopping the bus, exit thread */
2595                                 brcmf_sdbrcm_bus_stop(bus);
2596                                 bus->dpc_tsk = NULL;
2597                                 break;
2598                         }
2599                 } else
2600                         break;
2601         }
2602         return 0;
2603 }
2604
2605 int brcmf_sdbrcm_bus_txdata(struct brcmf_bus *bus, struct sk_buff *pkt)
2606 {
2607         int ret = -EBADE;
2608         uint datalen, prec;
2609
2610         brcmf_dbg(TRACE, "Enter\n");
2611
2612         datalen = pkt->len;
2613
2614         /* Add space for the header */
2615         skb_push(pkt, SDPCM_HDRLEN);
2616         /* precondition: IS_ALIGNED((unsigned long)(pkt->data), 2) */
2617
2618         prec = prio2prec((pkt->priority & PRIOMASK));
2619
2620         /* Check for existing queue, current flow-control,
2621                          pending event, or pending clock */
2622         brcmf_dbg(TRACE, "deferring pktq len %d\n", pktq_len(&bus->txq));
2623         bus->fcqueued++;
2624
2625         /* Priority based enq */
2626         spin_lock_bh(&bus->txqlock);
2627         if (brcmf_c_prec_enq(bus->drvr, &bus->txq, pkt, prec) == false) {
2628                 skb_pull(pkt, SDPCM_HDRLEN);
2629                 brcmf_txcomplete(bus->drvr, pkt, false);
2630                 brcmu_pkt_buf_free_skb(pkt);
2631                 brcmf_dbg(ERROR, "out of bus->txq !!!\n");
2632                 ret = -ENOSR;
2633         } else {
2634                 ret = 0;
2635         }
2636         spin_unlock_bh(&bus->txqlock);
2637
2638         if (pktq_len(&bus->txq) >= TXHI)
2639                 brcmf_txflowcontrol(bus->drvr, 0, ON);
2640
2641 #ifdef BCMDBG
2642         if (pktq_plen(&bus->txq, prec) > qcount[prec])
2643                 qcount[prec] = pktq_plen(&bus->txq, prec);
2644 #endif
2645         /* Schedule DPC if needed to send queued packet(s) */
2646         if (!bus->dpc_sched) {
2647                 bus->dpc_sched = true;
2648                 if (bus->dpc_tsk)
2649                         complete(&bus->dpc_wait);
2650         }
2651
2652         return ret;
2653 }
2654
2655 static int
2656 brcmf_sdbrcm_membytes(struct brcmf_bus *bus, bool write, u32 address, u8 *data,
2657                  uint size)
2658 {
2659         int bcmerror = 0;
2660         u32 sdaddr;
2661         uint dsize;
2662
2663         /* Determine initial transfer parameters */
2664         sdaddr = address & SBSDIO_SB_OFT_ADDR_MASK;
2665         if ((sdaddr + size) & SBSDIO_SBWINDOW_MASK)
2666                 dsize = (SBSDIO_SB_OFT_ADDR_LIMIT - sdaddr);
2667         else
2668                 dsize = size;
2669
2670         /* Set the backplane window to include the start address */
2671         bcmerror = brcmf_sdcard_set_sbaddr_window(bus->sdiodev, address);
2672         if (bcmerror) {
2673                 brcmf_dbg(ERROR, "window change failed\n");
2674                 goto xfer_done;
2675         }
2676
2677         /* Do the transfer(s) */
2678         while (size) {
2679                 brcmf_dbg(INFO, "%s %d bytes at offset 0x%08x in window 0x%08x\n",
2680                           write ? "write" : "read", dsize,
2681                           sdaddr, address & SBSDIO_SBWINDOW_MASK);
2682                 bcmerror = brcmf_sdcard_rwdata(bus->sdiodev, write,
2683                                                sdaddr, data, dsize);
2684                 if (bcmerror) {
2685                         brcmf_dbg(ERROR, "membytes transfer failed\n");
2686                         break;
2687                 }
2688
2689                 /* Adjust for next transfer (if any) */
2690                 size -= dsize;
2691                 if (size) {
2692                         data += dsize;
2693                         address += dsize;
2694                         bcmerror = brcmf_sdcard_set_sbaddr_window(bus->sdiodev,
2695                                                                   address);
2696                         if (bcmerror) {
2697                                 brcmf_dbg(ERROR, "window change failed\n");
2698                                 break;
2699                         }
2700                         sdaddr = 0;
2701                         dsize = min_t(uint, SBSDIO_SB_OFT_ADDR_LIMIT, size);
2702                 }
2703         }
2704
2705 xfer_done:
2706         /* Return the window to backplane enumeration space for core access */
2707         if (brcmf_sdcard_set_sbaddr_window(bus->sdiodev, bus->sdiodev->sbwad))
2708                 brcmf_dbg(ERROR, "FAILED to set window back to 0x%x\n",
2709                           bus->sdiodev->sbwad);
2710
2711         return bcmerror;
2712 }
2713
2714 #ifdef BCMDBG
2715 #define CONSOLE_LINE_MAX        192
2716
2717 static int brcmf_sdbrcm_readconsole(struct brcmf_bus *bus)
2718 {
2719         struct brcmf_console *c = &bus->console;
2720         u8 line[CONSOLE_LINE_MAX], ch;
2721         u32 n, idx, addr;
2722         int rv;
2723
2724         /* Don't do anything until FWREADY updates console address */
2725         if (bus->console_addr == 0)
2726                 return 0;
2727
2728         /* Read console log struct */
2729         addr = bus->console_addr + offsetof(struct rte_console, log_le);
2730         rv = brcmf_sdbrcm_membytes(bus, false, addr, (u8 *)&c->log_le,
2731                                    sizeof(c->log_le));
2732         if (rv < 0)
2733                 return rv;
2734
2735         /* Allocate console buffer (one time only) */
2736         if (c->buf == NULL) {
2737                 c->bufsize = le32_to_cpu(c->log_le.buf_size);
2738                 c->buf = kmalloc(c->bufsize, GFP_ATOMIC);
2739                 if (c->buf == NULL)
2740                         return -ENOMEM;
2741         }
2742
2743         idx = le32_to_cpu(c->log_le.idx);
2744
2745         /* Protect against corrupt value */
2746         if (idx > c->bufsize)
2747                 return -EBADE;
2748
2749         /* Skip reading the console buffer if the index pointer
2750          has not moved */
2751         if (idx == c->last)
2752                 return 0;
2753
2754         /* Read the console buffer */
2755         addr = le32_to_cpu(c->log_le.buf);
2756         rv = brcmf_sdbrcm_membytes(bus, false, addr, c->buf, c->bufsize);
2757         if (rv < 0)
2758                 return rv;
2759
2760         while (c->last != idx) {
2761                 for (n = 0; n < CONSOLE_LINE_MAX - 2; n++) {
2762                         if (c->last == idx) {
2763                                 /* This would output a partial line.
2764                                  * Instead, back up
2765                                  * the buffer pointer and output this
2766                                  * line next time around.
2767                                  */
2768                                 if (c->last >= n)
2769                                         c->last -= n;
2770                                 else
2771                                         c->last = c->bufsize - n;
2772                                 goto break2;
2773                         }
2774                         ch = c->buf[c->last];
2775                         c->last = (c->last + 1) % c->bufsize;
2776                         if (ch == '\n')
2777                                 break;
2778                         line[n] = ch;
2779                 }
2780
2781                 if (n > 0) {
2782                         if (line[n - 1] == '\r')
2783                                 n--;
2784                         line[n] = 0;
2785                         printk(KERN_DEBUG "CONSOLE: %s\n", line);
2786                 }
2787         }
2788 break2:
2789
2790         return 0;
2791 }
2792 #endif                          /* BCMDBG */
2793
2794 static int brcmf_tx_frame(struct brcmf_bus *bus, u8 *frame, u16 len)
2795 {
2796         int i;
2797         int ret;
2798
2799         bus->ctrl_frame_stat = false;
2800         ret = brcmf_sdbrcm_send_buf(bus, bus->sdiodev->sbwad,
2801                                     SDIO_FUNC_2, F2SYNC, frame, len, NULL);
2802
2803         if (ret < 0) {
2804                 /* On failure, abort the command and terminate the frame */
2805                 brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
2806                           ret);
2807                 bus->tx_sderrs++;
2808
2809                 brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
2810
2811                 brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
2812                                        SBSDIO_FUNC1_FRAMECTRL,
2813                                        SFC_WF_TERM, NULL);
2814                 bus->f1regdata++;
2815
2816                 for (i = 0; i < 3; i++) {
2817                         u8 hi, lo;
2818                         hi = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
2819                                                    SBSDIO_FUNC1_WFRAMEBCHI,
2820                                                    NULL);
2821                         lo = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
2822                                                    SBSDIO_FUNC1_WFRAMEBCLO,
2823                                                    NULL);
2824                         bus->f1regdata += 2;
2825                         if (hi == 0 && lo == 0)
2826                                 break;
2827                 }
2828                 return ret;
2829         }
2830
2831         bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
2832
2833         return ret;
2834 }
2835
2836 int
2837 brcmf_sdbrcm_bus_txctl(struct brcmf_bus *bus, unsigned char *msg, uint msglen)
2838 {
2839         u8 *frame;
2840         u16 len;
2841         u32 swheader;
2842         uint retries = 0;
2843         u8 doff = 0;
2844         int ret = -1;
2845
2846         brcmf_dbg(TRACE, "Enter\n");
2847
2848         /* Back the pointer to make a room for bus header */
2849         frame = msg - SDPCM_HDRLEN;
2850         len = (msglen += SDPCM_HDRLEN);
2851
2852         /* Add alignment padding (optional for ctl frames) */
2853         doff = ((unsigned long)frame % BRCMF_SDALIGN);
2854         if (doff) {
2855                 frame -= doff;
2856                 len += doff;
2857                 msglen += doff;
2858                 memset(frame, 0, doff + SDPCM_HDRLEN);
2859         }
2860         /* precondition: doff < BRCMF_SDALIGN */
2861         doff += SDPCM_HDRLEN;
2862
2863         /* Round send length to next SDIO block */
2864         if (bus->roundup && bus->blocksize && (len > bus->blocksize)) {
2865                 u16 pad = bus->blocksize - (len % bus->blocksize);
2866                 if ((pad <= bus->roundup) && (pad < bus->blocksize))
2867                         len += pad;
2868         } else if (len % BRCMF_SDALIGN) {
2869                 len += BRCMF_SDALIGN - (len % BRCMF_SDALIGN);
2870         }
2871
2872         /* Satisfy length-alignment requirements */
2873         if (len & (ALIGNMENT - 1))
2874                 len = roundup(len, ALIGNMENT);
2875
2876         /* precondition: IS_ALIGNED((unsigned long)frame, 2) */
2877
2878         /* Need to lock here to protect txseq and SDIO tx calls */
2879         down(&bus->sdsem);
2880
2881         bus_wake(bus);
2882
2883         /* Make sure backplane clock is on */
2884         brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
2885
2886         /* Hardware tag: 2 byte len followed by 2 byte ~len check (all LE) */
2887         *(__le16 *) frame = cpu_to_le16((u16) msglen);
2888         *(((__le16 *) frame) + 1) = cpu_to_le16(~msglen);
2889
2890         /* Software tag: channel, sequence number, data offset */
2891         swheader =
2892             ((SDPCM_CONTROL_CHANNEL << SDPCM_CHANNEL_SHIFT) &
2893              SDPCM_CHANNEL_MASK)
2894             | bus->tx_seq | ((doff << SDPCM_DOFFSET_SHIFT) &
2895                              SDPCM_DOFFSET_MASK);
2896         put_unaligned_le32(swheader, frame + SDPCM_FRAMETAG_LEN);
2897         put_unaligned_le32(0, frame + SDPCM_FRAMETAG_LEN + sizeof(swheader));
2898
2899         if (!data_ok(bus)) {
2900                 brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n",
2901                           bus->tx_max, bus->tx_seq);
2902                 bus->ctrl_frame_stat = true;
2903                 /* Send from dpc */
2904                 bus->ctrl_frame_buf = frame;
2905                 bus->ctrl_frame_len = len;
2906
2907                 brcmf_sdbrcm_wait_for_event(bus, &bus->ctrl_frame_stat);
2908
2909                 if (bus->ctrl_frame_stat == false) {
2910                         brcmf_dbg(INFO, "ctrl_frame_stat == false\n");
2911                         ret = 0;
2912                 } else {
2913                         brcmf_dbg(INFO, "ctrl_frame_stat == true\n");
2914                         ret = -1;
2915                 }
2916         }
2917
2918         if (ret == -1) {
2919 #ifdef BCMDBG
2920                 if (BRCMF_BYTES_ON() && BRCMF_CTL_ON()) {
2921                         printk(KERN_DEBUG "Tx Frame:\n");
2922                         print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
2923                                              frame, len);
2924                 } else if (BRCMF_HDRS_ON()) {
2925                         printk(KERN_DEBUG "TxHdr:\n");
2926                         print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
2927                                              frame, min_t(u16, len, 16));
2928                 }
2929 #endif
2930
2931                 do {
2932                         ret = brcmf_tx_frame(bus, frame, len);
2933                 } while (ret < 0 && retries++ < TXRETRIES);
2934         }
2935
2936         if ((bus->idletime == BRCMF_IDLE_IMMEDIATE) && !bus->dpc_sched) {
2937                 bus->activity = false;
2938                 brcmf_sdbrcm_clkctl(bus, CLK_NONE, true);
2939         }
2940
2941         up(&bus->sdsem);
2942
2943         if (ret)
2944                 bus->drvr->tx_ctlerrs++;
2945         else
2946                 bus->drvr->tx_ctlpkts++;
2947
2948         return ret ? -EIO : 0;
2949 }
2950
2951 int
2952 brcmf_sdbrcm_bus_rxctl(struct brcmf_bus *bus, unsigned char *msg, uint msglen)
2953 {
2954         int timeleft;
2955         uint rxlen = 0;
2956         bool pending;
2957
2958         brcmf_dbg(TRACE, "Enter\n");
2959
2960         /* Wait until control frame is available */
2961         timeleft = brcmf_sdbrcm_dcmd_resp_wait(bus, &bus->rxlen, &pending);
2962
2963         down(&bus->sdsem);
2964         rxlen = bus->rxlen;
2965         memcpy(msg, bus->rxctl, min(msglen, rxlen));
2966         bus->rxlen = 0;
2967         up(&bus->sdsem);
2968
2969         if (rxlen) {
2970                 brcmf_dbg(CTL, "resumed on rxctl frame, got %d expected %d\n",
2971                           rxlen, msglen);
2972         } else if (timeleft == 0) {
2973                 brcmf_dbg(ERROR, "resumed on timeout\n");
2974         } else if (pending == true) {
2975                 brcmf_dbg(CTL, "cancelled\n");
2976                 return -ERESTARTSYS;
2977         } else {
2978                 brcmf_dbg(CTL, "resumed for unknown reason?\n");
2979         }
2980
2981         if (rxlen)
2982                 bus->drvr->rx_ctlpkts++;
2983         else
2984                 bus->drvr->rx_ctlerrs++;
2985
2986         return rxlen ? (int)rxlen : -ETIMEDOUT;
2987 }
2988
2989 static int brcmf_sdbrcm_downloadvars(struct brcmf_bus *bus, void *arg, int len)
2990 {
2991         int bcmerror = 0;
2992
2993         brcmf_dbg(TRACE, "Enter\n");
2994
2995         /* Basic sanity checks */
2996         if (bus->drvr->up) {
2997                 bcmerror = -EISCONN;
2998                 goto err;
2999         }
3000         if (!len) {
3001                 bcmerror = -EOVERFLOW;
3002                 goto err;
3003         }
3004
3005         /* Free the old ones and replace with passed variables */
3006         kfree(bus->vars);
3007
3008         bus->vars = kmalloc(len, GFP_ATOMIC);
3009         bus->varsz = bus->vars ? len : 0;
3010         if (bus->vars == NULL) {
3011                 bcmerror = -ENOMEM;
3012                 goto err;
3013         }
3014
3015         /* Copy the passed variables, which should include the
3016                  terminating double-null */
3017         memcpy(bus->vars, arg, bus->varsz);
3018 err:
3019         return bcmerror;
3020 }
3021
3022 static int brcmf_sdbrcm_write_vars(struct brcmf_bus *bus)
3023 {
3024         int bcmerror = 0;
3025         u32 varsize;
3026         u32 varaddr;
3027         u8 *vbuffer;
3028         u32 varsizew;
3029         __le32 varsizew_le;
3030 #ifdef BCMDBG
3031         char *nvram_ularray;
3032 #endif                          /* BCMDBG */
3033
3034         /* Even if there are no vars are to be written, we still
3035                  need to set the ramsize. */
3036         varsize = bus->varsz ? roundup(bus->varsz, 4) : 0;
3037         varaddr = (bus->ramsize - 4) - varsize;
3038
3039         if (bus->vars) {
3040                 vbuffer = kzalloc(varsize, GFP_ATOMIC);
3041                 if (!vbuffer)
3042                         return -ENOMEM;
3043
3044                 memcpy(vbuffer, bus->vars, bus->varsz);
3045
3046                 /* Write the vars list */
3047                 bcmerror =
3048                     brcmf_sdbrcm_membytes(bus, true, varaddr, vbuffer, varsize);
3049 #ifdef BCMDBG
3050                 /* Verify NVRAM bytes */
3051                 brcmf_dbg(INFO, "Compare NVRAM dl & ul; varsize=%d\n", varsize);
3052                 nvram_ularray = kmalloc(varsize, GFP_ATOMIC);
3053                 if (!nvram_ularray)
3054                         return -ENOMEM;
3055
3056                 /* Upload image to verify downloaded contents. */
3057                 memset(nvram_ularray, 0xaa, varsize);
3058
3059                 /* Read the vars list to temp buffer for comparison */
3060                 bcmerror =
3061                     brcmf_sdbrcm_membytes(bus, false, varaddr, nvram_ularray,
3062                                      varsize);
3063                 if (bcmerror) {
3064                         brcmf_dbg(ERROR, "error %d on reading %d nvram bytes at 0x%08x\n",
3065                                   bcmerror, varsize, varaddr);
3066                 }
3067                 /* Compare the org NVRAM with the one read from RAM */
3068                 if (memcmp(vbuffer, nvram_ularray, varsize))
3069                         brcmf_dbg(ERROR, "Downloaded NVRAM image is corrupted\n");
3070                 else
3071                         brcmf_dbg(ERROR, "Download/Upload/Compare of NVRAM ok\n");
3072
3073                 kfree(nvram_ularray);
3074 #endif                          /* BCMDBG */
3075
3076                 kfree(vbuffer);
3077         }
3078
3079         /* adjust to the user specified RAM */
3080         brcmf_dbg(INFO, "Physical memory size: %d\n", bus->ramsize);
3081         brcmf_dbg(INFO, "Vars are at %d, orig varsize is %d\n",
3082                   varaddr, varsize);
3083         varsize = ((bus->ramsize - 4) - varaddr);
3084
3085         /*
3086          * Determine the length token:
3087          * Varsize, converted to words, in lower 16-bits, checksum
3088          * in upper 16-bits.
3089          */
3090         if (bcmerror) {
3091                 varsizew = 0;
3092                 varsizew_le = cpu_to_le32(0);
3093         } else {
3094                 varsizew = varsize / 4;
3095                 varsizew = (~varsizew << 16) | (varsizew & 0x0000FFFF);
3096                 varsizew_le = cpu_to_le32(varsizew);
3097         }
3098
3099         brcmf_dbg(INFO, "New varsize is %d, length token=0x%08x\n",
3100                   varsize, varsizew);
3101
3102         /* Write the length token to the last word */
3103         bcmerror = brcmf_sdbrcm_membytes(bus, true, (bus->ramsize - 4),
3104                                          (u8 *)&varsizew_le, 4);
3105
3106         return bcmerror;
3107 }
3108
3109 static int brcmf_sdbrcm_download_state(struct brcmf_bus *bus, bool enter)
3110 {
3111         uint retries;
3112         int bcmerror = 0;
3113         struct chip_info *ci = bus->ci;
3114
3115         /* To enter download state, disable ARM and reset SOCRAM.
3116          * To exit download state, simply reset ARM (default is RAM boot).
3117          */
3118         if (enter) {
3119                 bus->alp_only = true;
3120
3121                 ci->coredisable(bus->sdiodev, ci, BCMA_CORE_ARM_CM3);
3122
3123                 ci->resetcore(bus->sdiodev, ci, BCMA_CORE_INTERNAL_MEM);
3124
3125                 /* Clear the top bit of memory */
3126                 if (bus->ramsize) {
3127                         u32 zeros = 0;
3128                         brcmf_sdbrcm_membytes(bus, true, bus->ramsize - 4,
3129                                          (u8 *)&zeros, 4);
3130                 }
3131         } else {
3132                 if (!ci->iscoreup(bus->sdiodev, ci, BCMA_CORE_INTERNAL_MEM)) {
3133                         brcmf_dbg(ERROR, "SOCRAM core is down after reset?\n");
3134                         bcmerror = -EBADE;
3135                         goto fail;
3136                 }
3137
3138                 bcmerror = brcmf_sdbrcm_write_vars(bus);
3139                 if (bcmerror) {
3140                         brcmf_dbg(ERROR, "no vars written to RAM\n");
3141                         bcmerror = 0;
3142                 }
3143
3144                 w_sdreg32(bus, 0xFFFFFFFF,
3145                           offsetof(struct sdpcmd_regs, intstatus), &retries);
3146
3147                 ci->resetcore(bus->sdiodev, ci, BCMA_CORE_ARM_CM3);
3148
3149                 /* Allow HT Clock now that the ARM is running. */
3150                 bus->alp_only = false;
3151
3152                 bus->drvr->busstate = BRCMF_BUS_LOAD;
3153         }
3154 fail:
3155         return bcmerror;
3156 }
3157
3158 static int brcmf_sdbrcm_get_image(char *buf, int len, struct brcmf_bus *bus)
3159 {
3160         if (bus->firmware->size < bus->fw_ptr + len)
3161                 len = bus->firmware->size - bus->fw_ptr;
3162
3163         memcpy(buf, &bus->firmware->data[bus->fw_ptr], len);
3164         bus->fw_ptr += len;
3165         return len;
3166 }
3167
3168 MODULE_FIRMWARE(BCM4329_FW_NAME);
3169 MODULE_FIRMWARE(BCM4329_NV_NAME);
3170
3171 static int brcmf_sdbrcm_download_code_file(struct brcmf_bus *bus)
3172 {
3173         int offset = 0;
3174         uint len;
3175         u8 *memblock = NULL, *memptr;
3176         int ret;
3177
3178         brcmf_dbg(INFO, "Enter\n");
3179
3180         bus->fw_name = BCM4329_FW_NAME;
3181         ret = request_firmware(&bus->firmware, bus->fw_name,
3182                                &bus->sdiodev->func[2]->dev);
3183         if (ret) {
3184                 brcmf_dbg(ERROR, "Fail to request firmware %d\n", ret);
3185                 return ret;
3186         }
3187         bus->fw_ptr = 0;
3188
3189         memptr = memblock = kmalloc(MEMBLOCK + BRCMF_SDALIGN, GFP_ATOMIC);
3190         if (memblock == NULL) {
3191                 ret = -ENOMEM;
3192                 goto err;
3193         }
3194         if ((u32)(unsigned long)memblock % BRCMF_SDALIGN)
3195                 memptr += (BRCMF_SDALIGN -
3196                            ((u32)(unsigned long)memblock % BRCMF_SDALIGN));
3197
3198         /* Download image */
3199         while ((len =
3200                 brcmf_sdbrcm_get_image((char *)memptr, MEMBLOCK, bus))) {
3201                 ret = brcmf_sdbrcm_membytes(bus, true, offset, memptr, len);
3202                 if (ret) {
3203                         brcmf_dbg(ERROR, "error %d on writing %d membytes at 0x%08x\n",
3204                                   ret, MEMBLOCK, offset);
3205                         goto err;
3206                 }
3207
3208                 offset += MEMBLOCK;
3209         }
3210
3211 err:
3212         kfree(memblock);
3213
3214         release_firmware(bus->firmware);
3215         bus->fw_ptr = 0;
3216
3217         return ret;
3218 }
3219
3220 /*
3221  * ProcessVars:Takes a buffer of "<var>=<value>\n" lines read from a file
3222  * and ending in a NUL.
3223  * Removes carriage returns, empty lines, comment lines, and converts
3224  * newlines to NULs.
3225  * Shortens buffer as needed and pads with NULs.  End of buffer is marked
3226  * by two NULs.
3227 */
3228
3229 static uint brcmf_process_nvram_vars(char *varbuf, uint len)
3230 {
3231         char *dp;
3232         bool findNewline;
3233         int column;
3234         uint buf_len, n;
3235
3236         dp = varbuf;
3237
3238         findNewline = false;
3239         column = 0;
3240
3241         for (n = 0; n < len; n++) {
3242                 if (varbuf[n] == 0)
3243                         break;
3244                 if (varbuf[n] == '\r')
3245                         continue;
3246                 if (findNewline && varbuf[n] != '\n')
3247                         continue;
3248                 findNewline = false;
3249                 if (varbuf[n] == '#') {
3250                         findNewline = true;
3251                         continue;
3252                 }
3253                 if (varbuf[n] == '\n') {
3254                         if (column == 0)
3255                                 continue;
3256                         *dp++ = 0;
3257                         column = 0;
3258                         continue;
3259                 }
3260                 *dp++ = varbuf[n];
3261                 column++;
3262         }
3263         buf_len = dp - varbuf;
3264
3265         while (dp < varbuf + n)
3266                 *dp++ = 0;
3267
3268         return buf_len;
3269 }
3270
3271 static int brcmf_sdbrcm_download_nvram(struct brcmf_bus *bus)
3272 {
3273         uint len;
3274         char *memblock = NULL;
3275         char *bufp;
3276         int ret;
3277
3278         bus->nv_name = BCM4329_NV_NAME;
3279         ret = request_firmware(&bus->firmware, bus->nv_name,
3280                                &bus->sdiodev->func[2]->dev);
3281         if (ret) {
3282                 brcmf_dbg(ERROR, "Fail to request nvram %d\n", ret);
3283                 return ret;
3284         }
3285         bus->fw_ptr = 0;
3286
3287         memblock = kmalloc(MEMBLOCK, GFP_ATOMIC);
3288         if (memblock == NULL) {
3289                 ret = -ENOMEM;
3290                 goto err;
3291         }
3292
3293         len = brcmf_sdbrcm_get_image(memblock, MEMBLOCK, bus);
3294
3295         if (len > 0 && len < MEMBLOCK) {
3296                 bufp = (char *)memblock;
3297                 bufp[len] = 0;
3298                 len = brcmf_process_nvram_vars(bufp, len);
3299                 bufp += len;
3300                 *bufp++ = 0;
3301                 if (len)
3302                         ret = brcmf_sdbrcm_downloadvars(bus, memblock, len + 1);
3303                 if (ret)
3304                         brcmf_dbg(ERROR, "error downloading vars: %d\n", ret);
3305         } else {
3306                 brcmf_dbg(ERROR, "error reading nvram file: %d\n", len);
3307                 ret = -EIO;
3308         }
3309
3310 err:
3311         kfree(memblock);
3312
3313         release_firmware(bus->firmware);
3314         bus->fw_ptr = 0;
3315
3316         return ret;
3317 }
3318
3319 static int _brcmf_sdbrcm_download_firmware(struct brcmf_bus *bus)
3320 {
3321         int bcmerror = -1;
3322
3323         /* Keep arm in reset */
3324         if (brcmf_sdbrcm_download_state(bus, true)) {
3325                 brcmf_dbg(ERROR, "error placing ARM core in reset\n");
3326                 goto err;
3327         }
3328
3329         /* External image takes precedence if specified */
3330         if (brcmf_sdbrcm_download_code_file(bus)) {
3331                 brcmf_dbg(ERROR, "dongle image file download failed\n");
3332                 goto err;
3333         }
3334
3335         /* External nvram takes precedence if specified */
3336         if (brcmf_sdbrcm_download_nvram(bus))
3337                 brcmf_dbg(ERROR, "dongle nvram file download failed\n");
3338
3339         /* Take arm out of reset */
3340         if (brcmf_sdbrcm_download_state(bus, false)) {
3341                 brcmf_dbg(ERROR, "error getting out of ARM core reset\n");
3342                 goto err;
3343         }
3344
3345         bcmerror = 0;
3346
3347 err:
3348         return bcmerror;
3349 }
3350
3351 static bool
3352 brcmf_sdbrcm_download_firmware(struct brcmf_bus *bus)
3353 {
3354         bool ret;
3355
3356         /* Download the firmware */
3357         brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
3358
3359         ret = _brcmf_sdbrcm_download_firmware(bus) == 0;
3360
3361         brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
3362
3363         return ret;
3364 }
3365
3366 void brcmf_sdbrcm_bus_stop(struct brcmf_bus *bus)
3367 {
3368         u32 local_hostintmask;
3369         u8 saveclk;
3370         uint retries;
3371         int err;
3372
3373         brcmf_dbg(TRACE, "Enter\n");
3374
3375         if (bus->watchdog_tsk) {
3376                 send_sig(SIGTERM, bus->watchdog_tsk, 1);
3377                 kthread_stop(bus->watchdog_tsk);
3378                 bus->watchdog_tsk = NULL;
3379         }
3380
3381         if (bus->dpc_tsk && bus->dpc_tsk != current) {
3382                 send_sig(SIGTERM, bus->dpc_tsk, 1);
3383                 kthread_stop(bus->dpc_tsk);
3384                 bus->dpc_tsk = NULL;
3385         }
3386
3387         down(&bus->sdsem);
3388
3389         bus_wake(bus);
3390
3391         /* Enable clock for device interrupts */
3392         brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
3393
3394         /* Disable and clear interrupts at the chip level also */
3395         w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask), &retries);
3396         local_hostintmask = bus->hostintmask;
3397         bus->hostintmask = 0;
3398
3399         /* Change our idea of bus state */
3400         bus->drvr->busstate = BRCMF_BUS_DOWN;
3401
3402         /* Force clocks on backplane to be sure F2 interrupt propagates */
3403         saveclk = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
3404                                         SBSDIO_FUNC1_CHIPCLKCSR, &err);
3405         if (!err) {
3406                 brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
3407                                        SBSDIO_FUNC1_CHIPCLKCSR,
3408                                        (saveclk | SBSDIO_FORCE_HT), &err);
3409         }
3410         if (err)
3411                 brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err);
3412
3413         /* Turn off the bus (F2), free any pending packets */
3414         brcmf_dbg(INTR, "disable SDIO interrupts\n");
3415         brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx,
3416                          SDIO_FUNC_ENABLE_1, NULL);
3417
3418         /* Clear any pending interrupts now that F2 is disabled */
3419         w_sdreg32(bus, local_hostintmask,
3420                   offsetof(struct sdpcmd_regs, intstatus), &retries);
3421
3422         /* Turn off the backplane clock (only) */
3423         brcmf_sdbrcm_clkctl(bus, CLK_SDONLY, false);
3424
3425         /* Clear the data packet queues */
3426         brcmu_pktq_flush(&bus->txq, true, NULL, NULL);
3427
3428         /* Clear any held glomming stuff */
3429         if (bus->glomd)
3430                 brcmu_pkt_buf_free_skb(bus->glomd);
3431         brcmf_sdbrcm_free_glom(bus);
3432
3433         /* Clear rx control and wake any waiters */
3434         bus->rxlen = 0;
3435         brcmf_sdbrcm_dcmd_resp_wake(bus);
3436
3437         /* Reset some F2 state stuff */
3438         bus->rxskip = false;
3439         bus->tx_seq = bus->rx_seq = 0;
3440
3441         up(&bus->sdsem);
3442 }
3443
3444 int brcmf_sdbrcm_bus_init(struct brcmf_pub *drvr)
3445 {
3446         struct brcmf_bus *bus = drvr->bus;
3447         unsigned long timeout;
3448         uint retries = 0;
3449         u8 ready, enable;
3450         int err, ret = 0;
3451         u8 saveclk;
3452
3453         brcmf_dbg(TRACE, "Enter\n");
3454
3455         /* try to download image and nvram to the dongle */
3456         if (drvr->busstate == BRCMF_BUS_DOWN) {
3457                 if (!(brcmf_sdbrcm_download_firmware(bus)))
3458                         return -1;
3459         }
3460
3461         if (!bus->drvr)
3462                 return 0;
3463
3464         /* Start the watchdog timer */
3465         bus->drvr->tickcnt = 0;
3466         brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
3467
3468         down(&bus->sdsem);
3469
3470         /* Make sure backplane clock is on, needed to generate F2 interrupt */
3471         brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
3472         if (bus->clkstate != CLK_AVAIL)
3473                 goto exit;
3474
3475         /* Force clocks on backplane to be sure F2 interrupt propagates */
3476         saveclk =
3477             brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
3478                                   SBSDIO_FUNC1_CHIPCLKCSR, &err);
3479         if (!err) {
3480                 brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
3481                                        SBSDIO_FUNC1_CHIPCLKCSR,
3482                                        (saveclk | SBSDIO_FORCE_HT), &err);
3483         }
3484         if (err) {
3485                 brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err);
3486                 goto exit;
3487         }
3488
3489         /* Enable function 2 (frame transfers) */
3490         w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT,
3491                   offsetof(struct sdpcmd_regs, tosbmailboxdata), &retries);
3492         enable = (SDIO_FUNC_ENABLE_1 | SDIO_FUNC_ENABLE_2);
3493
3494         brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx,
3495                                enable, NULL);
3496
3497         timeout = jiffies + msecs_to_jiffies(BRCMF_WAIT_F2RDY);
3498         ready = 0;
3499         while (enable != ready) {
3500                 ready = brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_0,
3501                                               SDIO_CCCR_IORx, NULL);
3502                 if (time_after(jiffies, timeout))
3503                         break;
3504                 else if (time_after(jiffies, timeout - BRCMF_WAIT_F2RDY + 50))
3505                         /* prevent busy waiting if it takes too long */
3506                         msleep_interruptible(20);
3507         }
3508
3509         brcmf_dbg(INFO, "enable 0x%02x, ready 0x%02x\n", enable, ready);
3510
3511         /* If F2 successfully enabled, set core and enable interrupts */
3512         if (ready == enable) {
3513                 /* Set up the interrupt mask and enable interrupts */
3514                 bus->hostintmask = HOSTINTMASK;
3515                 w_sdreg32(bus, bus->hostintmask,
3516                           offsetof(struct sdpcmd_regs, hostintmask), &retries);
3517
3518                 brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
3519                                        SBSDIO_WATERMARK, 8, &err);
3520
3521                 /* Set bus state according to enable result */
3522                 drvr->busstate = BRCMF_BUS_DATA;
3523         }
3524
3525         else {
3526                 /* Disable F2 again */
3527                 enable = SDIO_FUNC_ENABLE_1;
3528                 brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0,
3529                                        SDIO_CCCR_IOEx, enable, NULL);
3530         }
3531
3532         /* Restore previous clock setting */
3533         brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
3534                                SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err);
3535
3536         /* If we didn't come up, turn off backplane clock */
3537         if (drvr->busstate != BRCMF_BUS_DATA)
3538                 brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
3539
3540 exit:
3541         up(&bus->sdsem);
3542
3543         return ret;
3544 }
3545
3546 void brcmf_sdbrcm_isr(void *arg)
3547 {
3548         struct brcmf_bus *bus = (struct brcmf_bus *) arg;
3549
3550         brcmf_dbg(TRACE, "Enter\n");
3551
3552         if (!bus) {
3553                 brcmf_dbg(ERROR, "bus is null pointer, exiting\n");
3554                 return;
3555         }
3556
3557         if (bus->drvr->busstate == BRCMF_BUS_DOWN) {
3558                 brcmf_dbg(ERROR, "bus is down. we have nothing to do\n");
3559                 return;
3560         }
3561         /* Count the interrupt call */
3562         bus->intrcount++;
3563         bus->ipend = true;
3564
3565         /* Shouldn't get this interrupt if we're sleeping? */
3566         if (bus->sleeping) {
3567                 brcmf_dbg(ERROR, "INTERRUPT WHILE SLEEPING??\n");
3568                 return;
3569         }
3570
3571         /* Disable additional interrupts (is this needed now)? */
3572         if (!bus->intr)
3573                 brcmf_dbg(ERROR, "isr w/o interrupt configured!\n");
3574
3575         bus->dpc_sched = true;
3576         if (bus->dpc_tsk)
3577                 complete(&bus->dpc_wait);
3578 }
3579
3580 static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_pub *drvr)
3581 {
3582         struct brcmf_bus *bus;
3583
3584         brcmf_dbg(TIMER, "Enter\n");
3585
3586         bus = drvr->bus;
3587
3588         /* Ignore the timer if simulating bus down */
3589         if (bus->sleeping)
3590                 return false;
3591
3592         down(&bus->sdsem);
3593
3594         /* Poll period: check device if appropriate. */
3595         if (bus->poll && (++bus->polltick >= bus->pollrate)) {
3596                 u32 intstatus = 0;
3597
3598                 /* Reset poll tick */
3599                 bus->polltick = 0;
3600
3601                 /* Check device if no interrupts */
3602                 if (!bus->intr || (bus->intrcount == bus->lastintrs)) {
3603
3604                         if (!bus->dpc_sched) {
3605                                 u8 devpend;
3606                                 devpend = brcmf_sdcard_cfg_read(bus->sdiodev,
3607                                                 SDIO_FUNC_0, SDIO_CCCR_INTx,
3608                                                 NULL);
3609                                 intstatus =
3610                                     devpend & (INTR_STATUS_FUNC1 |
3611                                                INTR_STATUS_FUNC2);
3612                         }
3613
3614                         /* If there is something, make like the ISR and
3615                                  schedule the DPC */
3616                         if (intstatus) {
3617                                 bus->pollcnt++;
3618                                 bus->ipend = true;
3619
3620                                 bus->dpc_sched = true;
3621                                 if (bus->dpc_tsk)
3622                                         complete(&bus->dpc_wait);
3623                         }
3624                 }
3625
3626                 /* Update interrupt tracking */
3627                 bus->lastintrs = bus->intrcount;
3628         }
3629 #ifdef BCMDBG
3630         /* Poll for console output periodically */
3631         if (drvr->busstate == BRCMF_BUS_DATA && bus->console_interval != 0) {
3632                 bus->console.count += BRCMF_WD_POLL_MS;
3633                 if (bus->console.count >= bus->console_interval) {
3634                         bus->console.count -= bus->console_interval;
3635                         /* Make sure backplane clock is on */
3636                         brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
3637                         if (brcmf_sdbrcm_readconsole(bus) < 0)
3638                                 /* stop on error */
3639                                 bus->console_interval = 0;
3640                 }
3641         }
3642 #endif                          /* BCMDBG */
3643
3644         /* On idle timeout clear activity flag and/or turn off clock */
3645         if ((bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) {
3646                 if (++bus->idlecount >= bus->idletime) {
3647                         bus->idlecount = 0;
3648                         if (bus->activity) {
3649                                 bus->activity = false;
3650                                 brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
3651                         } else {
3652                                 brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
3653                         }
3654                 }
3655         }
3656
3657         up(&bus->sdsem);
3658
3659         return bus->ipend;
3660 }
3661
3662 static bool brcmf_sdbrcm_chipmatch(u16 chipid)
3663 {
3664         if (chipid == BCM4329_CHIP_ID)
3665                 return true;
3666         return false;
3667 }
3668
3669 static void brcmf_sdbrcm_release_malloc(struct brcmf_bus *bus)
3670 {
3671         brcmf_dbg(TRACE, "Enter\n");
3672
3673         kfree(bus->rxbuf);
3674         bus->rxctl = bus->rxbuf = NULL;
3675         bus->rxlen = 0;
3676
3677         kfree(bus->databuf);
3678         bus->databuf = NULL;
3679 }
3680
3681 static bool brcmf_sdbrcm_probe_malloc(struct brcmf_bus *bus)
3682 {
3683         brcmf_dbg(TRACE, "Enter\n");
3684
3685         if (bus->drvr->maxctl) {
3686                 bus->rxblen =
3687                     roundup((bus->drvr->maxctl + SDPCM_HDRLEN),
3688                             ALIGNMENT) + BRCMF_SDALIGN;
3689                 bus->rxbuf = kmalloc(bus->rxblen, GFP_ATOMIC);
3690                 if (!(bus->rxbuf))
3691                         goto fail;
3692         }
3693
3694         /* Allocate buffer to receive glomed packet */
3695         bus->databuf = kmalloc(MAX_DATA_BUF, GFP_ATOMIC);
3696         if (!(bus->databuf)) {
3697                 /* release rxbuf which was already located as above */
3698                 if (!bus->rxblen)
3699                         kfree(bus->rxbuf);
3700                 goto fail;
3701         }
3702
3703         /* Align the buffer */
3704         if ((unsigned long)bus->databuf % BRCMF_SDALIGN)
3705                 bus->dataptr = bus->databuf + (BRCMF_SDALIGN -
3706                                ((unsigned long)bus->databuf % BRCMF_SDALIGN));
3707         else
3708                 bus->dataptr = bus->databuf;
3709
3710         return true;
3711
3712 fail:
3713         return false;
3714 }
3715
3716 static bool
3717 brcmf_sdbrcm_probe_attach(struct brcmf_bus *bus, u32 regsva)
3718 {
3719         u8 clkctl = 0;
3720         int err = 0;
3721         int reg_addr;
3722         u32 reg_val;
3723         u8 idx;
3724
3725         bus->alp_only = true;
3726
3727         /* Return the window to backplane enumeration space for core access */
3728         if (brcmf_sdcard_set_sbaddr_window(bus->sdiodev, SI_ENUM_BASE))
3729                 brcmf_dbg(ERROR, "FAILED to return to SI_ENUM_BASE\n");
3730
3731 #ifdef BCMDBG
3732         printk(KERN_DEBUG "F1 signature read @0x18000000=0x%4x\n",
3733                brcmf_sdcard_reg_read(bus->sdiodev, SI_ENUM_BASE, 4));
3734
3735 #endif                          /* BCMDBG */
3736
3737         /*
3738          * Force PLL off until brcmf_sdio_chip_attach()
3739          * programs PLL control regs
3740          */
3741
3742         brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
3743                                SBSDIO_FUNC1_CHIPCLKCSR,
3744                                BRCMF_INIT_CLKCTL1, &err);
3745         if (!err)
3746                 clkctl =
3747                     brcmf_sdcard_cfg_read(bus->sdiodev, SDIO_FUNC_1,
3748                                           SBSDIO_FUNC1_CHIPCLKCSR, &err);
3749
3750         if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {
3751                 brcmf_dbg(ERROR, "ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n",
3752                           err, BRCMF_INIT_CLKCTL1, clkctl);
3753                 goto fail;
3754         }
3755
3756         if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci, regsva)) {
3757                 brcmf_dbg(ERROR, "brcmf_sdio_chip_attach failed!\n");
3758                 goto fail;
3759         }
3760
3761         if (!brcmf_sdbrcm_chipmatch((u16) bus->ci->chip)) {
3762                 brcmf_dbg(ERROR, "unsupported chip: 0x%04x\n", bus->ci->chip);
3763                 goto fail;
3764         }
3765
3766         brcmf_sdio_chip_drivestrengthinit(bus->sdiodev, bus->ci,
3767                                           SDIO_DRIVE_STRENGTH);
3768
3769         /* Get info on the SOCRAM cores... */
3770         bus->ramsize = bus->ci->ramsize;
3771         if (!(bus->ramsize)) {
3772                 brcmf_dbg(ERROR, "failed to find SOCRAM memory!\n");
3773                 goto fail;
3774         }
3775
3776         /* Set core control so an SDIO reset does a backplane reset */
3777         idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_SDIO_DEV);
3778         reg_addr = bus->ci->c_inf[idx].base +
3779                    offsetof(struct sdpcmd_regs, corecontrol);
3780         reg_val = brcmf_sdcard_reg_read(bus->sdiodev, reg_addr, sizeof(u32));
3781         brcmf_sdcard_reg_write(bus->sdiodev, reg_addr, sizeof(u32),
3782                                reg_val | CC_BPRESEN);
3783
3784         brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN);
3785
3786         /* Locate an appropriately-aligned portion of hdrbuf */
3787         bus->rxhdr = (u8 *) roundup((unsigned long)&bus->hdrbuf[0],
3788                                     BRCMF_SDALIGN);
3789
3790         /* Set the poll and/or interrupt flags */
3791         bus->intr = true;
3792         bus->poll = false;
3793         if (bus->poll)
3794                 bus->pollrate = 1;
3795
3796         return true;
3797
3798 fail:
3799         return false;
3800 }
3801
3802 static bool brcmf_sdbrcm_probe_init(struct brcmf_bus *bus)
3803 {
3804         brcmf_dbg(TRACE, "Enter\n");
3805
3806         /* Disable F2 to clear any intermediate frame state on the dongle */
3807         brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_0, SDIO_CCCR_IOEx,
3808                                SDIO_FUNC_ENABLE_1, NULL);
3809
3810         bus->drvr->busstate = BRCMF_BUS_DOWN;
3811         bus->sleeping = false;
3812         bus->rxflow = false;
3813
3814         /* Done with backplane-dependent accesses, can drop clock... */
3815         brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
3816                                SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
3817
3818         /* ...and initialize clock/power states */
3819         bus->clkstate = CLK_SDONLY;
3820         bus->idletime = BRCMF_IDLE_INTERVAL;
3821         bus->idleclock = BRCMF_IDLE_ACTIVE;
3822
3823         /* Query the F2 block size, set roundup accordingly */
3824         bus->blocksize = bus->sdiodev->func[2]->cur_blksize;
3825         bus->roundup = min(max_roundup, bus->blocksize);
3826
3827         /* bus module does not support packet chaining */
3828         bus->use_rxchain = false;
3829         bus->sd_rxchain = false;
3830
3831         return true;
3832 }
3833
3834 static int
3835 brcmf_sdbrcm_watchdog_thread(void *data)
3836 {
3837         struct brcmf_bus *bus = (struct brcmf_bus *)data;
3838
3839         allow_signal(SIGTERM);
3840         /* Run until signal received */
3841         while (1) {
3842                 if (kthread_should_stop())
3843                         break;
3844                 if (!wait_for_completion_interruptible(&bus->watchdog_wait)) {
3845                         brcmf_sdbrcm_bus_watchdog(bus->drvr);
3846                         /* Count the tick for reference */
3847                         bus->drvr->tickcnt++;
3848                 } else
3849                         break;
3850         }
3851         return 0;
3852 }
3853
3854 static void
3855 brcmf_sdbrcm_watchdog(unsigned long data)
3856 {
3857         struct brcmf_bus *bus = (struct brcmf_bus *)data;
3858
3859         if (bus->watchdog_tsk) {
3860                 complete(&bus->watchdog_wait);
3861                 /* Reschedule the watchdog */
3862                 if (bus->wd_timer_valid)
3863                         mod_timer(&bus->timer,
3864                                   jiffies + BRCMF_WD_POLL_MS * HZ / 1000);
3865         }
3866 }
3867
3868 static void brcmf_sdbrcm_release_dongle(struct brcmf_bus *bus)
3869 {
3870         brcmf_dbg(TRACE, "Enter\n");
3871
3872         if (bus->ci) {
3873                 brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false);
3874                 brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
3875                 brcmf_sdio_chip_detach(&bus->ci);
3876                 if (bus->vars && bus->varsz)
3877                         kfree(bus->vars);
3878                 bus->vars = NULL;
3879         }
3880
3881         brcmf_dbg(TRACE, "Disconnected\n");
3882 }
3883
3884 /* Detach and free everything */
3885 static void brcmf_sdbrcm_release(struct brcmf_bus *bus)
3886 {
3887         brcmf_dbg(TRACE, "Enter\n");
3888
3889         if (bus) {
3890                 /* De-register interrupt handler */
3891                 brcmf_sdcard_intr_dereg(bus->sdiodev);
3892
3893                 if (bus->drvr) {
3894                         brcmf_detach(bus->drvr);
3895                         brcmf_sdbrcm_release_dongle(bus);
3896                         bus->drvr = NULL;
3897                 }
3898
3899                 brcmf_sdbrcm_release_malloc(bus);
3900
3901                 kfree(bus);
3902         }
3903
3904         brcmf_dbg(TRACE, "Disconnected\n");
3905 }
3906
3907 void *brcmf_sdbrcm_probe(u16 bus_no, u16 slot, u16 func, uint bustype,
3908                          u32 regsva, struct brcmf_sdio_dev *sdiodev)
3909 {
3910         int ret;
3911         struct brcmf_bus *bus;
3912
3913         /* Init global variables at run-time, not as part of the declaration.
3914          * This is required to support init/de-init of the driver.
3915          * Initialization
3916          * of globals as part of the declaration results in non-deterministic
3917          * behavior since the value of the globals may be different on the
3918          * first time that the driver is initialized vs subsequent
3919          * initializations.
3920          */
3921         brcmf_c_init();
3922
3923         brcmf_dbg(TRACE, "Enter\n");
3924
3925         /* We make an assumption about address window mappings:
3926          * regsva == SI_ENUM_BASE*/
3927
3928         /* Allocate private bus interface state */
3929         bus = kzalloc(sizeof(struct brcmf_bus), GFP_ATOMIC);
3930         if (!bus)
3931                 goto fail;
3932
3933         bus->sdiodev = sdiodev;
3934         sdiodev->bus = bus;
3935         skb_queue_head_init(&bus->glom);
3936         bus->txbound = BRCMF_TXBOUND;
3937         bus->rxbound = BRCMF_RXBOUND;
3938         bus->txminmax = BRCMF_TXMINMAX;
3939         bus->tx_seq = SDPCM_SEQUENCE_WRAP - 1;
3940         bus->usebufpool = false;        /* Use bufpool if allocated,
3941                                          else use locally malloced rxbuf */
3942
3943         /* attempt to attach to the dongle */
3944         if (!(brcmf_sdbrcm_probe_attach(bus, regsva))) {
3945                 brcmf_dbg(ERROR, "brcmf_sdbrcm_probe_attach failed\n");
3946                 goto fail;
3947         }
3948
3949         spin_lock_init(&bus->txqlock);
3950         init_waitqueue_head(&bus->ctrl_wait);
3951         init_waitqueue_head(&bus->dcmd_resp_wait);
3952
3953         /* Set up the watchdog timer */
3954         init_timer(&bus->timer);
3955         bus->timer.data = (unsigned long)bus;
3956         bus->timer.function = brcmf_sdbrcm_watchdog;
3957
3958         /* Initialize thread based operation and lock */
3959         sema_init(&bus->sdsem, 1);
3960
3961         /* Initialize watchdog thread */
3962         init_completion(&bus->watchdog_wait);
3963         bus->watchdog_tsk = kthread_run(brcmf_sdbrcm_watchdog_thread,
3964                                         bus, "brcmf_watchdog");
3965         if (IS_ERR(bus->watchdog_tsk)) {
3966                 printk(KERN_WARNING
3967                        "brcmf_watchdog thread failed to start\n");
3968                 bus->watchdog_tsk = NULL;
3969         }
3970         /* Initialize DPC thread */
3971         init_completion(&bus->dpc_wait);
3972         bus->dpc_tsk = kthread_run(brcmf_sdbrcm_dpc_thread,
3973                                    bus, "brcmf_dpc");
3974         if (IS_ERR(bus->dpc_tsk)) {
3975                 printk(KERN_WARNING
3976                        "brcmf_dpc thread failed to start\n");
3977                 bus->dpc_tsk = NULL;
3978         }
3979
3980         /* Attach to the brcmf/OS/network interface */
3981         bus->drvr = brcmf_attach(bus, SDPCM_RESERVE);
3982         if (!bus->drvr) {
3983                 brcmf_dbg(ERROR, "brcmf_attach failed\n");
3984                 goto fail;
3985         }
3986
3987         /* Allocate buffers */
3988         if (!(brcmf_sdbrcm_probe_malloc(bus))) {
3989                 brcmf_dbg(ERROR, "brcmf_sdbrcm_probe_malloc failed\n");
3990                 goto fail;
3991         }
3992
3993         if (!(brcmf_sdbrcm_probe_init(bus))) {
3994                 brcmf_dbg(ERROR, "brcmf_sdbrcm_probe_init failed\n");
3995                 goto fail;
3996         }
3997
3998         /* Register interrupt callback, but mask it (not operational yet). */
3999         brcmf_dbg(INTR, "disable SDIO interrupts (not interested yet)\n");
4000         ret = brcmf_sdcard_intr_reg(bus->sdiodev);
4001         if (ret != 0) {
4002                 brcmf_dbg(ERROR, "FAILED: sdcard_intr_reg returned %d\n", ret);
4003                 goto fail;
4004         }
4005         brcmf_dbg(INTR, "registered SDIO interrupt function ok\n");
4006
4007         brcmf_dbg(INFO, "completed!!\n");
4008
4009         /* if firmware path present try to download and bring up bus */
4010         ret = brcmf_bus_start(bus->drvr);
4011         if (ret != 0) {
4012                 if (ret == -ENOLINK) {
4013                         brcmf_dbg(ERROR, "dongle is not responding\n");
4014                         goto fail;
4015                 }
4016         }
4017
4018         /* add interface and open for business */
4019         if (brcmf_add_if((struct brcmf_info *)bus->drvr, 0, "wlan%d", NULL)) {
4020                 brcmf_dbg(ERROR, "Add primary net device interface failed!!\n");
4021                 goto fail;
4022         }
4023
4024         return bus;
4025
4026 fail:
4027         brcmf_sdbrcm_release(bus);
4028         return NULL;
4029 }
4030
4031 void brcmf_sdbrcm_disconnect(void *ptr)
4032 {
4033         struct brcmf_bus *bus = (struct brcmf_bus *)ptr;
4034
4035         brcmf_dbg(TRACE, "Enter\n");
4036
4037         if (bus)
4038                 brcmf_sdbrcm_release(bus);
4039
4040         brcmf_dbg(TRACE, "Disconnected\n");
4041 }
4042
4043 struct device *brcmf_bus_get_device(struct brcmf_bus *bus)
4044 {
4045         return &bus->sdiodev->func[2]->dev;
4046 }
4047
4048 void
4049 brcmf_sdbrcm_wd_timer(struct brcmf_bus *bus, uint wdtick)
4050 {
4051         /* Totally stop the timer */
4052         if (!wdtick && bus->wd_timer_valid == true) {
4053                 del_timer_sync(&bus->timer);
4054                 bus->wd_timer_valid = false;
4055                 bus->save_ms = wdtick;
4056                 return;
4057         }
4058
4059         /* don't start the wd until fw is loaded */
4060         if (bus->drvr->busstate == BRCMF_BUS_DOWN)
4061                 return;
4062
4063         if (wdtick) {
4064                 if (bus->save_ms != BRCMF_WD_POLL_MS) {
4065                         if (bus->wd_timer_valid == true)
4066                                 /* Stop timer and restart at new value */
4067                                 del_timer_sync(&bus->timer);
4068
4069                         /* Create timer again when watchdog period is
4070                            dynamically changed or in the first instance
4071                          */
4072                         bus->timer.expires =
4073                                 jiffies + BRCMF_WD_POLL_MS * HZ / 1000;
4074                         add_timer(&bus->timer);
4075
4076                 } else {
4077                         /* Re arm the timer, at last watchdog period */
4078                         mod_timer(&bus->timer,
4079                                 jiffies + BRCMF_WD_POLL_MS * HZ / 1000);
4080                 }
4081
4082                 bus->wd_timer_valid = true;
4083                 bus->save_ms = wdtick;
4084         }
4085 }