ath5k: correct packet length in tx descriptors
[pandora-kernel.git] / drivers / net / wireless / ath5k / ath5k.h
1 /*
2  * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
3  * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
4  *
5  * Permission to use, copy, modify, and distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  */
17
18 #ifndef _ATH5K_H
19 #define _ATH5K_H
20
21 /* TODO: Clean up channel debuging -doesn't work anyway- and start
22  * working on reg. control code using all available eeprom information
23  * -rev. engineering needed- */
24 #define CHAN_DEBUG      0
25
26 #include <linux/io.h>
27 #include <linux/types.h>
28 #include <net/mac80211.h>
29
30 /* RX/TX descriptor hw structs
31  * TODO: Driver part should only see sw structs */
32 #include "desc.h"
33
34 /* EEPROM structs/offsets
35  * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities)
36  * and clean up common bits, then introduce set/get functions in eeprom.c */
37 #include "eeprom.h"
38
39 /* PCI IDs */
40 #define PCI_DEVICE_ID_ATHEROS_AR5210            0x0007 /* AR5210 */
41 #define PCI_DEVICE_ID_ATHEROS_AR5311            0x0011 /* AR5311 */
42 #define PCI_DEVICE_ID_ATHEROS_AR5211            0x0012 /* AR5211 */
43 #define PCI_DEVICE_ID_ATHEROS_AR5212            0x0013 /* AR5212 */
44 #define PCI_DEVICE_ID_3COM_3CRDAG675            0x0013 /* 3CRDAG675 (Atheros AR5212) */
45 #define PCI_DEVICE_ID_3COM_2_3CRPAG175          0x0013 /* 3CRPAG175 (Atheros AR5212) */
46 #define PCI_DEVICE_ID_ATHEROS_AR5210_AP         0x0207 /* AR5210 (Early) */
47 #define PCI_DEVICE_ID_ATHEROS_AR5212_IBM        0x1014 /* AR5212 (IBM MiniPCI) */
48 #define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT    0x1107 /* AR5210 (no eeprom) */
49 #define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT    0x1113 /* AR5212 (no eeprom) */
50 #define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT    0x1112 /* AR5211 (no eeprom) */
51 #define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA       0xf013 /* AR5212 (emulation board) */
52 #define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY     0xff12 /* AR5211 (emulation board) */
53 #define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B    0xf11b /* AR5211 (emulation board) */
54 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV2       0x0052 /* AR5312 WMAC (AP31) */
55 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV7       0x0057 /* AR5312 WMAC (AP30-040) */
56 #define PCI_DEVICE_ID_ATHEROS_AR5312_REV8       0x0058 /* AR5312 WMAC (AP43-030) */
57 #define PCI_DEVICE_ID_ATHEROS_AR5212_0014       0x0014 /* AR5212 compatible */
58 #define PCI_DEVICE_ID_ATHEROS_AR5212_0015       0x0015 /* AR5212 compatible */
59 #define PCI_DEVICE_ID_ATHEROS_AR5212_0016       0x0016 /* AR5212 compatible */
60 #define PCI_DEVICE_ID_ATHEROS_AR5212_0017       0x0017 /* AR5212 compatible */
61 #define PCI_DEVICE_ID_ATHEROS_AR5212_0018       0x0018 /* AR5212 compatible */
62 #define PCI_DEVICE_ID_ATHEROS_AR5212_0019       0x0019 /* AR5212 compatible */
63 #define PCI_DEVICE_ID_ATHEROS_AR2413            0x001a /* AR2413 (Griffin-lite) */
64 #define PCI_DEVICE_ID_ATHEROS_AR5413            0x001b /* AR5413 (Eagle) */
65 #define PCI_DEVICE_ID_ATHEROS_AR5424            0x001c /* AR5424 (Condor PCI-E) */
66 #define PCI_DEVICE_ID_ATHEROS_AR5416            0x0023 /* AR5416 */
67 #define PCI_DEVICE_ID_ATHEROS_AR5418            0x0024 /* AR5418 */
68
69 /****************************\
70   GENERIC DRIVER DEFINITIONS
71 \****************************/
72
73 #define ATH5K_PRINTF(fmt, ...)   printk("%s: " fmt, __func__, ##__VA_ARGS__)
74
75 #define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
76         printk(_level "ath5k %s: " _fmt, \
77                 ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
78                 ##__VA_ARGS__)
79
80 #define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \
81         if (net_ratelimit()) \
82                 ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
83         } while (0)
84
85 #define ATH5K_INFO(_sc, _fmt, ...) \
86         ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
87
88 #define ATH5K_WARN(_sc, _fmt, ...) \
89         ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
90
91 #define ATH5K_ERR(_sc, _fmt, ...) \
92         ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
93
94 /*
95  * AR5K REGISTER ACCESS
96  */
97
98 /* Some macros to read/write fields */
99
100 /* First shift, then mask */
101 #define AR5K_REG_SM(_val, _flags)                                       \
102         (((_val) << _flags##_S) & (_flags))
103
104 /* First mask, then shift */
105 #define AR5K_REG_MS(_val, _flags)                                       \
106         (((_val) & (_flags)) >> _flags##_S)
107
108 /* Some registers can hold multiple values of interest. For this
109  * reason when we want to write to these registers we must first
110  * retrieve the values which we do not want to clear (lets call this
111  * old_data) and then set the register with this and our new_value:
112  * ( old_data | new_value) */
113 #define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val)                     \
114         ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \
115             (((_val) << _flags##_S) & (_flags)), _reg)
116
117 #define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask)                   \
118         ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) &           \
119                         (_mask)) | (_flags), _reg)
120
121 #define AR5K_REG_ENABLE_BITS(ah, _reg, _flags)                          \
122         ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg)
123
124 #define AR5K_REG_DISABLE_BITS(ah, _reg, _flags)                 \
125         ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg)
126
127 /* Access to PHY registers */
128 #define AR5K_PHY_READ(ah, _reg)                                 \
129         ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2))
130
131 #define AR5K_PHY_WRITE(ah, _reg, _val)                                  \
132         ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2))
133
134 /* Access QCU registers per queue */
135 #define AR5K_REG_READ_Q(ah, _reg, _queue)                               \
136         (ath5k_hw_reg_read(ah, _reg) & (1 << _queue))                   \
137
138 #define AR5K_REG_WRITE_Q(ah, _reg, _queue)                              \
139         ath5k_hw_reg_write(ah, (1 << _queue), _reg)
140
141 #define AR5K_Q_ENABLE_BITS(_reg, _queue) do {                           \
142         _reg |= 1 << _queue;                                            \
143 } while (0)
144
145 #define AR5K_Q_DISABLE_BITS(_reg, _queue) do {                          \
146         _reg &= ~(1 << _queue);                                         \
147 } while (0)
148
149 /* Used while writing initvals */
150 #define AR5K_REG_WAIT(_i) do {                                          \
151         if (_i % 64)                                                    \
152                 udelay(1);                                              \
153 } while (0)
154
155 /* Register dumps are done per operation mode */
156 #define AR5K_INI_RFGAIN_5GHZ            0
157 #define AR5K_INI_RFGAIN_2GHZ            1
158
159 /* TODO: Clean this up */
160 #define AR5K_INI_VAL_11A                0
161 #define AR5K_INI_VAL_11A_TURBO          1
162 #define AR5K_INI_VAL_11B                2
163 #define AR5K_INI_VAL_11G                3
164 #define AR5K_INI_VAL_11G_TURBO          4
165 #define AR5K_INI_VAL_XR                 0
166 #define AR5K_INI_VAL_MAX                5
167
168 #define AR5K_RF5111_INI_RF_MAX_BANKS    AR5K_MAX_RF_BANKS
169 #define AR5K_RF5112_INI_RF_MAX_BANKS    AR5K_MAX_RF_BANKS
170
171 /* Used for BSSID etc manipulation */
172 #define AR5K_LOW_ID(_a)(                                \
173 (_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24  \
174 )
175
176 #define AR5K_HIGH_ID(_a)        ((_a)[4] | (_a)[5] << 8)
177
178 /*
179  * Some tuneable values (these should be changeable by the user)
180  * TODO: Make use of them and add more options OR use debug/configfs
181  */
182 #define AR5K_TUNE_DMA_BEACON_RESP               2
183 #define AR5K_TUNE_SW_BEACON_RESP                10
184 #define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF       0
185 #define AR5K_TUNE_RADAR_ALERT                   false
186 #define AR5K_TUNE_MIN_TX_FIFO_THRES             1
187 #define AR5K_TUNE_MAX_TX_FIFO_THRES             ((IEEE80211_MAX_LEN / 64) + 1)
188 #define AR5K_TUNE_REGISTER_TIMEOUT              20000
189 /* Register for RSSI threshold has a mask of 0xff, so 255 seems to
190  * be the max value. */
191 #define AR5K_TUNE_RSSI_THRES                    129
192 /* This must be set when setting the RSSI threshold otherwise it can
193  * prevent a reset. If AR5K_RSSI_THR is read after writing to it
194  * the BMISS_THRES will be seen as 0, seems harware doesn't keep
195  * track of it. Max value depends on harware. For AR5210 this is just 7.
196  * For AR5211+ this seems to be up to 255. */
197 #define AR5K_TUNE_BMISS_THRES                   7
198 #define AR5K_TUNE_REGISTER_DWELL_TIME           20000
199 #define AR5K_TUNE_BEACON_INTERVAL               100
200 #define AR5K_TUNE_AIFS                          2
201 #define AR5K_TUNE_AIFS_11B                      2
202 #define AR5K_TUNE_AIFS_XR                       0
203 #define AR5K_TUNE_CWMIN                         15
204 #define AR5K_TUNE_CWMIN_11B                     31
205 #define AR5K_TUNE_CWMIN_XR                      3
206 #define AR5K_TUNE_CWMAX                         1023
207 #define AR5K_TUNE_CWMAX_11B                     1023
208 #define AR5K_TUNE_CWMAX_XR                      7
209 #define AR5K_TUNE_NOISE_FLOOR                   -72
210 #define AR5K_TUNE_MAX_TXPOWER                   60
211 #define AR5K_TUNE_DEFAULT_TXPOWER               30
212 #define AR5K_TUNE_TPC_TXPOWER                   true
213 #define AR5K_TUNE_ANT_DIVERSITY                 true
214 #define AR5K_TUNE_HWTXTRIES                     4
215
216 #define AR5K_INIT_CARR_SENSE_EN                 1
217
218 /*Swap RX/TX Descriptor for big endian archs*/
219 #if defined(__BIG_ENDIAN)
220 #define AR5K_INIT_CFG   (               \
221         AR5K_CFG_SWTD | AR5K_CFG_SWRD   \
222 )
223 #else
224 #define AR5K_INIT_CFG   0x00000000
225 #endif
226
227 /* Initial values */
228 #define AR5K_INIT_TX_LATENCY                    502
229 #define AR5K_INIT_USEC                          39
230 #define AR5K_INIT_USEC_TURBO                    79
231 #define AR5K_INIT_USEC_32                       31
232 #define AR5K_INIT_SLOT_TIME                     396
233 #define AR5K_INIT_SLOT_TIME_TURBO               480
234 #define AR5K_INIT_ACK_CTS_TIMEOUT               1024
235 #define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO         0x08000800
236 #define AR5K_INIT_PROG_IFS                      920
237 #define AR5K_INIT_PROG_IFS_TURBO                960
238 #define AR5K_INIT_EIFS                          3440
239 #define AR5K_INIT_EIFS_TURBO                    6880
240 #define AR5K_INIT_SIFS                          560
241 #define AR5K_INIT_SIFS_TURBO                    480
242 #define AR5K_INIT_SH_RETRY                      10
243 #define AR5K_INIT_LG_RETRY                      AR5K_INIT_SH_RETRY
244 #define AR5K_INIT_SSH_RETRY                     32
245 #define AR5K_INIT_SLG_RETRY                     AR5K_INIT_SSH_RETRY
246 #define AR5K_INIT_TX_RETRY                      10
247
248 #define AR5K_INIT_TRANSMIT_LATENCY              (                       \
249         (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |       \
250         (AR5K_INIT_USEC)                                                \
251 )
252 #define AR5K_INIT_TRANSMIT_LATENCY_TURBO        (                       \
253         (AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |       \
254         (AR5K_INIT_USEC_TURBO)                                          \
255 )
256 #define AR5K_INIT_PROTO_TIME_CNTRL              (                       \
257         (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) |      \
258         (AR5K_INIT_PROG_IFS)                                            \
259 )
260 #define AR5K_INIT_PROTO_TIME_CNTRL_TURBO        (                       \
261         (AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \
262         (AR5K_INIT_PROG_IFS_TURBO)                                      \
263 )
264
265 /* token to use for aifs, cwmin, cwmax in MadWiFi */
266 #define AR5K_TXQ_USEDEFAULT     ((u32) -1)
267
268 /* GENERIC CHIPSET DEFINITIONS */
269
270 /* MAC Chips */
271 enum ath5k_version {
272         AR5K_AR5210     = 0,
273         AR5K_AR5211     = 1,
274         AR5K_AR5212     = 2,
275 };
276
277 /* PHY Chips */
278 enum ath5k_radio {
279         AR5K_RF5110     = 0,
280         AR5K_RF5111     = 1,
281         AR5K_RF5112     = 2,
282         AR5K_RF2413     = 3,
283         AR5K_RF5413     = 4,
284         AR5K_RF2316     = 5,
285         AR5K_RF2317     = 6,
286         AR5K_RF2425     = 7,
287 };
288
289 /*
290  * Common silicon revision/version values
291  */
292
293 enum ath5k_srev_type {
294         AR5K_VERSION_MAC,
295         AR5K_VERSION_RAD,
296 };
297
298 struct ath5k_srev_name {
299         const char              *sr_name;
300         enum ath5k_srev_type    sr_type;
301         u_int                   sr_val;
302 };
303
304 #define AR5K_SREV_UNKNOWN       0xffff
305
306 #define AR5K_SREV_AR5210        0x00 /* Crete */
307 #define AR5K_SREV_AR5311        0x10 /* Maui 1 */
308 #define AR5K_SREV_AR5311A       0x20 /* Maui 2 */
309 #define AR5K_SREV_AR5311B       0x30 /* Spirit */
310 #define AR5K_SREV_AR5211        0x40 /* Oahu */
311 #define AR5K_SREV_AR5212        0x50 /* Venice */
312 #define AR5K_SREV_AR5213        0x55 /* ??? */
313 #define AR5K_SREV_AR5213A       0x59 /* Hainan */
314 #define AR5K_SREV_AR2413        0x78 /* Griffin lite */
315 #define AR5K_SREV_AR2414        0x70 /* Griffin */
316 #define AR5K_SREV_AR5424        0x90 /* Condor */
317 #define AR5K_SREV_AR5413        0xa4 /* Eagle lite */
318 #define AR5K_SREV_AR5414        0xa0 /* Eagle */
319 #define AR5K_SREV_AR2415        0xb0 /* Cobra */
320 #define AR5K_SREV_AR5416        0xc0 /* PCI-E */
321 #define AR5K_SREV_AR5418        0xca /* PCI-E */
322 #define AR5K_SREV_AR2425        0xe0 /* Swan */
323 #define AR5K_SREV_AR2417        0xf0 /* Nala */
324
325 #define AR5K_SREV_RAD_5110      0x00
326 #define AR5K_SREV_RAD_5111      0x10
327 #define AR5K_SREV_RAD_5111A     0x15
328 #define AR5K_SREV_RAD_2111      0x20
329 #define AR5K_SREV_RAD_5112      0x30
330 #define AR5K_SREV_RAD_5112A     0x35
331 #define AR5K_SREV_RAD_5112B     0x36
332 #define AR5K_SREV_RAD_2112      0x40
333 #define AR5K_SREV_RAD_2112A     0x45
334 #define AR5K_SREV_RAD_2112B     0x46
335 #define AR5K_SREV_RAD_2413      0x50
336 #define AR5K_SREV_RAD_5413      0x60
337 #define AR5K_SREV_RAD_2316      0x70
338 #define AR5K_SREV_RAD_2317      0x80
339 #define AR5K_SREV_RAD_5424      0xa0 /* Mostly same as 5413 */
340 #define AR5K_SREV_RAD_2425      0xa2
341 #define AR5K_SREV_RAD_5133      0xc0
342
343 #define AR5K_SREV_PHY_5211      0x30
344 #define AR5K_SREV_PHY_5212      0x41
345 #define AR5K_SREV_PHY_2112B     0x43
346 #define AR5K_SREV_PHY_2413      0x45
347 #define AR5K_SREV_PHY_5413      0x61
348 #define AR5K_SREV_PHY_2425      0x70
349
350 /* IEEE defs */
351 #define IEEE80211_MAX_LEN       2500
352
353 /* TODO add support to mac80211 for vendor-specific rates and modes */
354
355 /*
356  * Some of this information is based on Documentation from:
357  *
358  * http://madwifi.org/wiki/ChipsetFeatures/SuperAG
359  *
360  * Modulation for Atheros' eXtended Range - range enhancing extension that is
361  * supposed to double the distance an Atheros client device can keep a
362  * connection with an Atheros access point. This is achieved by increasing
363  * the receiver sensitivity up to, -105dBm, which is about 20dB above what
364  * the 802.11 specifications demand. In addition, new (proprietary) data rates
365  * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
366  *
367  * Please note that can you either use XR or TURBO but you cannot use both,
368  * they are exclusive.
369  *
370  */
371 #define MODULATION_XR           0x00000200
372 /*
373  * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a
374  * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s
375  * signaling rate achieved through the bonding of two 54Mbit/s 802.11g
376  * channels. To use this feature your Access Point must also suport it.
377  * There is also a distinction between "static" and "dynamic" turbo modes:
378  *
379  * - Static: is the dumb version: devices set to this mode stick to it until
380  *     the mode is turned off.
381  * - Dynamic: is the intelligent version, the network decides itself if it
382  *     is ok to use turbo. As soon as traffic is detected on adjacent channels
383  *     (which would get used in turbo mode), or when a non-turbo station joins
384  *     the network, turbo mode won't be used until the situation changes again.
385  *     Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which
386  *     monitors the used radio band in order to decide whether turbo mode may
387  *     be used or not.
388  *
389  * This article claims Super G sticks to bonding of channels 5 and 6 for
390  * USA:
391  *
392  * http://www.pcworld.com/article/id,113428-page,1/article.html
393  *
394  * The channel bonding seems to be driver specific though. In addition to
395  * deciding what channels will be used, these "Turbo" modes are accomplished
396  * by also enabling the following features:
397  *
398  * - Bursting: allows multiple frames to be sent at once, rather than pausing
399  *     after each frame. Bursting is a standards-compliant feature that can be
400  *     used with any Access Point.
401  * - Fast frames: increases the amount of information that can be sent per
402  *     frame, also resulting in a reduction of transmission overhead. It is a
403  *     proprietary feature that needs to be supported by the Access Point.
404  * - Compression: data frames are compressed in real time using a Lempel Ziv
405  *     algorithm. This is done transparently. Once this feature is enabled,
406  *     compression and decompression takes place inside the chipset, without
407  *     putting additional load on the host CPU.
408  *
409  */
410 #define MODULATION_TURBO        0x00000080
411
412 enum ath5k_driver_mode {
413         AR5K_MODE_11A           =       0,
414         AR5K_MODE_11A_TURBO     =       1,
415         AR5K_MODE_11B           =       2,
416         AR5K_MODE_11G           =       3,
417         AR5K_MODE_11G_TURBO     =       4,
418         AR5K_MODE_XR            =       0,
419         AR5K_MODE_MAX           =       5
420 };
421
422
423 /****************\
424   TX DEFINITIONS
425 \****************/
426
427 /*
428  * TX Status descriptor
429  */
430 struct ath5k_tx_status {
431         u16     ts_seqnum;
432         u16     ts_tstamp;
433         u8      ts_status;
434         u8      ts_rate[4];
435         u8      ts_retry[4];
436         u8      ts_final_idx;
437         s8      ts_rssi;
438         u8      ts_shortretry;
439         u8      ts_longretry;
440         u8      ts_virtcol;
441         u8      ts_antenna;
442 };
443
444 #define AR5K_TXSTAT_ALTRATE     0x80
445 #define AR5K_TXERR_XRETRY       0x01
446 #define AR5K_TXERR_FILT         0x02
447 #define AR5K_TXERR_FIFO         0x04
448
449 /**
450  * enum ath5k_tx_queue - Queue types used to classify tx queues.
451  * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue
452  * @AR5K_TX_QUEUE_DATA: A normal data queue
453  * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue
454  * @AR5K_TX_QUEUE_BEACON: The beacon queue
455  * @AR5K_TX_QUEUE_CAB: The after-beacon queue
456  * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue
457  */
458 enum ath5k_tx_queue {
459         AR5K_TX_QUEUE_INACTIVE = 0,
460         AR5K_TX_QUEUE_DATA,
461         AR5K_TX_QUEUE_XR_DATA,
462         AR5K_TX_QUEUE_BEACON,
463         AR5K_TX_QUEUE_CAB,
464         AR5K_TX_QUEUE_UAPSD,
465 };
466
467 #define AR5K_NUM_TX_QUEUES              10
468 #define AR5K_NUM_TX_QUEUES_NOQCU        2
469
470 /*
471  * Queue syb-types to classify normal data queues.
472  * These are the 4 Access Categories as defined in
473  * WME spec. 0 is the lowest priority and 4 is the
474  * highest. Normal data that hasn't been classified
475  * goes to the Best Effort AC.
476  */
477 enum ath5k_tx_queue_subtype {
478         AR5K_WME_AC_BK = 0,     /*Background traffic*/
479         AR5K_WME_AC_BE,         /*Best-effort (normal) traffic)*/
480         AR5K_WME_AC_VI,         /*Video traffic*/
481         AR5K_WME_AC_VO,         /*Voice traffic*/
482 };
483
484 /*
485  * Queue ID numbers as returned by the hw functions, each number
486  * represents a hw queue. If hw does not support hw queues
487  * (eg 5210) all data goes in one queue. These match
488  * d80211 definitions (net80211/MadWiFi don't use them).
489  */
490 enum ath5k_tx_queue_id {
491         AR5K_TX_QUEUE_ID_NOQCU_DATA     = 0,
492         AR5K_TX_QUEUE_ID_NOQCU_BEACON   = 1,
493         AR5K_TX_QUEUE_ID_DATA_MIN       = 0, /*IEEE80211_TX_QUEUE_DATA0*/
494         AR5K_TX_QUEUE_ID_DATA_MAX       = 4, /*IEEE80211_TX_QUEUE_DATA4*/
495         AR5K_TX_QUEUE_ID_DATA_SVP       = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/
496         AR5K_TX_QUEUE_ID_CAB            = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/
497         AR5K_TX_QUEUE_ID_BEACON         = 7, /*IEEE80211_TX_QUEUE_BEACON*/
498         AR5K_TX_QUEUE_ID_UAPSD          = 8,
499         AR5K_TX_QUEUE_ID_XR_DATA        = 9,
500 };
501
502 /*
503  * Flags to set hw queue's parameters...
504  */
505 #define AR5K_TXQ_FLAG_TXOKINT_ENABLE            0x0001  /* Enable TXOK interrupt */
506 #define AR5K_TXQ_FLAG_TXERRINT_ENABLE           0x0002  /* Enable TXERR interrupt */
507 #define AR5K_TXQ_FLAG_TXEOLINT_ENABLE           0x0004  /* Enable TXEOL interrupt -not used- */
508 #define AR5K_TXQ_FLAG_TXDESCINT_ENABLE          0x0008  /* Enable TXDESC interrupt -not used- */
509 #define AR5K_TXQ_FLAG_TXURNINT_ENABLE           0x0010  /* Enable TXURN interrupt */
510 #define AR5K_TXQ_FLAG_CBRORNINT_ENABLE          0x0020  /* Enable CBRORN interrupt */
511 #define AR5K_TXQ_FLAG_CBRURNINT_ENABLE          0x0040  /* Enable CBRURN interrupt */
512 #define AR5K_TXQ_FLAG_QTRIGINT_ENABLE           0x0080  /* Enable QTRIG interrupt */
513 #define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE         0x0100  /* Enable TXNOFRM interrupt */
514 #define AR5K_TXQ_FLAG_BACKOFF_DISABLE           0x0200  /* Disable random post-backoff */
515 #define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE 0x0300  /* Enable ready time expiry policy (?)*/
516 #define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE 0x0800  /* Enable backoff while bursting */
517 #define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS         0x1000  /* Disable backoff while bursting */
518 #define AR5K_TXQ_FLAG_COMPRESSION_ENABLE        0x2000  /* Enable hw compression -not implemented-*/
519
520 /*
521  * A struct to hold tx queue's parameters
522  */
523 struct ath5k_txq_info {
524         enum ath5k_tx_queue tqi_type;
525         enum ath5k_tx_queue_subtype tqi_subtype;
526         u16     tqi_flags;      /* Tx queue flags (see above) */
527         u32     tqi_aifs;       /* Arbitrated Interframe Space */
528         s32     tqi_cw_min;     /* Minimum Contention Window */
529         s32     tqi_cw_max;     /* Maximum Contention Window */
530         u32     tqi_cbr_period; /* Constant bit rate period */
531         u32     tqi_cbr_overflow_limit;
532         u32     tqi_burst_time;
533         u32     tqi_ready_time; /* Not used */
534 };
535
536 /*
537  * Transmit packet types.
538  * used on tx control descriptor
539  * TODO: Use them inside base.c corectly
540  */
541 enum ath5k_pkt_type {
542         AR5K_PKT_TYPE_NORMAL            = 0,
543         AR5K_PKT_TYPE_ATIM              = 1,
544         AR5K_PKT_TYPE_PSPOLL            = 2,
545         AR5K_PKT_TYPE_BEACON            = 3,
546         AR5K_PKT_TYPE_PROBE_RESP        = 4,
547         AR5K_PKT_TYPE_PIFS              = 5,
548 };
549
550 /*
551  * TX power and TPC settings
552  */
553 #define AR5K_TXPOWER_OFDM(_r, _v)       (                       \
554         ((0 & 1) << ((_v) + 6)) |                               \
555         (((ah->ah_txpower.txp_rates[(_r)]) & 0x3f) << (_v))     \
556 )
557
558 #define AR5K_TXPOWER_CCK(_r, _v)        (                       \
559         (ah->ah_txpower.txp_rates[(_r)] & 0x3f) << (_v) \
560 )
561
562 /*
563  * DMA size definitions (2^n+2)
564  */
565 enum ath5k_dmasize {
566         AR5K_DMASIZE_4B = 0,
567         AR5K_DMASIZE_8B,
568         AR5K_DMASIZE_16B,
569         AR5K_DMASIZE_32B,
570         AR5K_DMASIZE_64B,
571         AR5K_DMASIZE_128B,
572         AR5K_DMASIZE_256B,
573         AR5K_DMASIZE_512B
574 };
575
576
577 /****************\
578   RX DEFINITIONS
579 \****************/
580
581 /*
582  * RX Status descriptor
583  */
584 struct ath5k_rx_status {
585         u16     rs_datalen;
586         u16     rs_tstamp;
587         u8      rs_status;
588         u8      rs_phyerr;
589         s8      rs_rssi;
590         u8      rs_keyix;
591         u8      rs_rate;
592         u8      rs_antenna;
593         u8      rs_more;
594 };
595
596 #define AR5K_RXERR_CRC          0x01
597 #define AR5K_RXERR_PHY          0x02
598 #define AR5K_RXERR_FIFO         0x04
599 #define AR5K_RXERR_DECRYPT      0x08
600 #define AR5K_RXERR_MIC          0x10
601 #define AR5K_RXKEYIX_INVALID    ((u8) - 1)
602 #define AR5K_TXKEYIX_INVALID    ((u32) - 1)
603
604
605 /**************************\
606  BEACON TIMERS DEFINITIONS
607 \**************************/
608
609 #define AR5K_BEACON_PERIOD      0x0000ffff
610 #define AR5K_BEACON_ENA         0x00800000 /*enable beacon xmit*/
611 #define AR5K_BEACON_RESET_TSF   0x01000000 /*force a TSF reset*/
612
613 #if 0
614 /**
615  * struct ath5k_beacon_state - Per-station beacon timer state.
616  * @bs_interval: in TU's, can also include the above flags
617  * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a
618  *      Point Coordination Function capable AP
619  */
620 struct ath5k_beacon_state {
621         u32     bs_next_beacon;
622         u32     bs_next_dtim;
623         u32     bs_interval;
624         u8      bs_dtim_period;
625         u8      bs_cfp_period;
626         u16     bs_cfp_max_duration;
627         u16     bs_cfp_du_remain;
628         u16     bs_tim_offset;
629         u16     bs_sleep_duration;
630         u16     bs_bmiss_threshold;
631         u32     bs_cfp_next;
632 };
633 #endif
634
635
636 /*
637  * TSF to TU conversion:
638  *
639  * TSF is a 64bit value in usec (microseconds).
640  * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of
641  * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024).
642  */
643 #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
644
645
646 /*******************************\
647   GAIN OPTIMIZATION DEFINITIONS
648 \*******************************/
649
650 enum ath5k_rfgain {
651         AR5K_RFGAIN_INACTIVE = 0,
652         AR5K_RFGAIN_READ_REQUESTED,
653         AR5K_RFGAIN_NEED_CHANGE,
654 };
655
656 #define AR5K_GAIN_CRN_FIX_BITS_5111             4
657 #define AR5K_GAIN_CRN_FIX_BITS_5112             7
658 #define AR5K_GAIN_CRN_MAX_FIX_BITS              AR5K_GAIN_CRN_FIX_BITS_5112
659 #define AR5K_GAIN_DYN_ADJUST_HI_MARGIN          15
660 #define AR5K_GAIN_DYN_ADJUST_LO_MARGIN          20
661 #define AR5K_GAIN_CCK_PROBE_CORR                5
662 #define AR5K_GAIN_CCK_OFDM_GAIN_DELTA           15
663 #define AR5K_GAIN_STEP_COUNT                    10
664 #define AR5K_GAIN_PARAM_TX_CLIP                 0
665 #define AR5K_GAIN_PARAM_PD_90                   1
666 #define AR5K_GAIN_PARAM_PD_84                   2
667 #define AR5K_GAIN_PARAM_GAIN_SEL                3
668 #define AR5K_GAIN_PARAM_MIX_ORN                 0
669 #define AR5K_GAIN_PARAM_PD_138                  1
670 #define AR5K_GAIN_PARAM_PD_137                  2
671 #define AR5K_GAIN_PARAM_PD_136                  3
672 #define AR5K_GAIN_PARAM_PD_132                  4
673 #define AR5K_GAIN_PARAM_PD_131                  5
674 #define AR5K_GAIN_PARAM_PD_130                  6
675 #define AR5K_GAIN_CHECK_ADJUST(_g)              \
676         ((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high)
677
678 struct ath5k_gain_opt_step {
679         s16                             gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS];
680         s32                             gos_gain;
681 };
682
683 struct ath5k_gain {
684         u32                     g_step_idx;
685         u32                     g_current;
686         u32                     g_target;
687         u32                     g_low;
688         u32                     g_high;
689         u32                     g_f_corr;
690         u32                     g_active;
691         const struct ath5k_gain_opt_step        *g_step;
692 };
693
694
695 /********************\
696   COMMON DEFINITIONS
697 \********************/
698
699 #define AR5K_SLOT_TIME_9        396
700 #define AR5K_SLOT_TIME_20       880
701 #define AR5K_SLOT_TIME_MAX      0xffff
702
703 /* channel_flags */
704 #define CHANNEL_CW_INT  0x0008  /* Contention Window interference detected */
705 #define CHANNEL_TURBO   0x0010  /* Turbo Channel */
706 #define CHANNEL_CCK     0x0020  /* CCK channel */
707 #define CHANNEL_OFDM    0x0040  /* OFDM channel */
708 #define CHANNEL_2GHZ    0x0080  /* 2GHz channel. */
709 #define CHANNEL_5GHZ    0x0100  /* 5GHz channel */
710 #define CHANNEL_PASSIVE 0x0200  /* Only passive scan allowed */
711 #define CHANNEL_DYN     0x0400  /* Dynamic CCK-OFDM channel (for g operation) */
712 #define CHANNEL_XR      0x0800  /* XR channel */
713
714 #define CHANNEL_A       (CHANNEL_5GHZ|CHANNEL_OFDM)
715 #define CHANNEL_B       (CHANNEL_2GHZ|CHANNEL_CCK)
716 #define CHANNEL_G       (CHANNEL_2GHZ|CHANNEL_OFDM)
717 #define CHANNEL_T       (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
718 #define CHANNEL_TG      (CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
719 #define CHANNEL_108A    CHANNEL_T
720 #define CHANNEL_108G    CHANNEL_TG
721 #define CHANNEL_X       (CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR)
722
723 #define CHANNEL_ALL     (CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \
724                 CHANNEL_TURBO)
725
726 #define CHANNEL_ALL_NOTURBO     (CHANNEL_ALL & ~CHANNEL_TURBO)
727 #define CHANNEL_MODES           CHANNEL_ALL
728
729 /*
730  * Used internaly for reset_tx_queue).
731  * Also see struct struct ieee80211_channel.
732  */
733 #define IS_CHAN_XR(_c)  ((_c.hw_value & CHANNEL_XR) != 0)
734 #define IS_CHAN_B(_c)   ((_c.hw_value & CHANNEL_B) != 0)
735
736 /*
737  * The following structure is used to map 2GHz channels to
738  * 5GHz Atheros channels.
739  * TODO: Clean up
740  */
741 struct ath5k_athchan_2ghz {
742         u32     a2_flags;
743         u16     a2_athchan;
744 };
745
746
747 /******************\
748   RATE DEFINITIONS
749 \******************/
750
751 /**
752  * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32.
753  *
754  * The rate code is used to get the RX rate or set the TX rate on the
755  * hardware descriptors. It is also used for internal modulation control
756  * and settings.
757  *
758  * This is the hardware rate map we are aware of:
759  *
760  * rate_code   0x01    0x02    0x03    0x04    0x05    0x06    0x07    0x08
761  * rate_kbps   3000    1000    ?       ?       ?       2000    500     48000
762  *
763  * rate_code   0x09    0x0A    0x0B    0x0C    0x0D    0x0E    0x0F    0x10
764  * rate_kbps   24000   12000   6000    54000   36000   18000   9000    ?
765  *
766  * rate_code   17      18      19      20      21      22      23      24
767  * rate_kbps   ?       ?       ?       ?       ?       ?       ?       11000
768  *
769  * rate_code   25      26      27      28      29      30      31      32
770  * rate_kbps   5500    2000    1000    11000S  5500S   2000S   ?       ?
771  *
772  * "S" indicates CCK rates with short preamble.
773  *
774  * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the
775  * lowest 4 bits, so they are the same as below with a 0xF mask.
776  * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M).
777  * We handle this in ath5k_setup_bands().
778  */
779 #define AR5K_MAX_RATES 32
780
781 /* B */
782 #define ATH5K_RATE_CODE_1M      0x1B
783 #define ATH5K_RATE_CODE_2M      0x1A
784 #define ATH5K_RATE_CODE_5_5M    0x19
785 #define ATH5K_RATE_CODE_11M     0x18
786 /* A and G */
787 #define ATH5K_RATE_CODE_6M      0x0B
788 #define ATH5K_RATE_CODE_9M      0x0F
789 #define ATH5K_RATE_CODE_12M     0x0A
790 #define ATH5K_RATE_CODE_18M     0x0E
791 #define ATH5K_RATE_CODE_24M     0x09
792 #define ATH5K_RATE_CODE_36M     0x0D
793 #define ATH5K_RATE_CODE_48M     0x08
794 #define ATH5K_RATE_CODE_54M     0x0C
795 /* XR */
796 #define ATH5K_RATE_CODE_XR_500K 0x07
797 #define ATH5K_RATE_CODE_XR_1M   0x02
798 #define ATH5K_RATE_CODE_XR_2M   0x06
799 #define ATH5K_RATE_CODE_XR_3M   0x01
800
801 /* adding this flag to rate_code enables short preamble */
802 #define AR5K_SET_SHORT_PREAMBLE 0x04
803
804 /*
805  * Crypto definitions
806  */
807
808 #define AR5K_KEYCACHE_SIZE      8
809
810 /***********************\
811  HW RELATED DEFINITIONS
812 \***********************/
813
814 /*
815  * Misc definitions
816  */
817 #define AR5K_RSSI_EP_MULTIPLIER (1<<7)
818
819 #define AR5K_ASSERT_ENTRY(_e, _s) do {          \
820         if (_e >= _s)                           \
821                 return (false);                 \
822 } while (0)
823
824 /*
825  * Hardware interrupt abstraction
826  */
827
828 /**
829  * enum ath5k_int - Hardware interrupt masks helpers
830  *
831  * @AR5K_INT_RX: mask to identify received frame interrupts, of type
832  *      AR5K_ISR_RXOK or AR5K_ISR_RXERR
833  * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?)
834  * @AR5K_INT_RXNOFRM: No frame received (?)
835  * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The
836  *      Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's
837  *      LinkPtr is NULL. For more details, refer to:
838  *      http://www.freepatentsonline.com/20030225739.html
839  * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors).
840  *      Note that Rx overrun is not always fatal, on some chips we can continue
841  *      operation without reseting the card, that's why int_fatal is not
842  *      common for all chips.
843  * @AR5K_INT_TX: mask to identify received frame interrupts, of type
844  *      AR5K_ISR_TXOK or AR5K_ISR_TXERR
845  * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?)
846  * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold
847  *      We currently do increments on interrupt by
848  *      (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2
849  * @AR5K_INT_MIB: Indicates the Management Information Base counters should be
850  *      checked. We should do this with ath5k_hw_update_mib_counters() but
851  *      it seems we should also then do some noise immunity work.
852  * @AR5K_INT_RXPHY: RX PHY Error
853  * @AR5K_INT_RXKCM: RX Key cache miss
854  * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a
855  *      beacon that must be handled in software. The alternative is if you
856  *      have VEOL support, in that case you let the hardware deal with things.
857  * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing
858  *      beacons from the AP have associated with, we should probably try to
859  *      reassociate. When in IBSS mode this might mean we have not received
860  *      any beacons from any local stations. Note that every station in an
861  *      IBSS schedules to send beacons at the Target Beacon Transmission Time
862  *      (TBTT) with a random backoff.
863  * @AR5K_INT_BNR: Beacon Not Ready interrupt - ??
864  * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now
865  *      until properly handled
866  * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA
867  *      errors. These types of errors we can enable seem to be of type
868  *      AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR.
869  * @AR5K_INT_GLOBAL: Used to clear and set the IER
870  * @AR5K_INT_NOCARD: signals the card has been removed
871  * @AR5K_INT_COMMON: common interrupts shared amogst MACs with the same
872  *      bit value
873  *
874  * These are mapped to take advantage of some common bits
875  * between the MACs, to be able to set intr properties
876  * easier. Some of them are not used yet inside hw.c. Most map
877  * to the respective hw interrupt value as they are common amogst different
878  * MACs.
879  */
880 enum ath5k_int {
881         AR5K_INT_RXOK   = 0x00000001,
882         AR5K_INT_RXDESC = 0x00000002,
883         AR5K_INT_RXERR  = 0x00000004,
884         AR5K_INT_RXNOFRM = 0x00000008,
885         AR5K_INT_RXEOL  = 0x00000010,
886         AR5K_INT_RXORN  = 0x00000020,
887         AR5K_INT_TXOK   = 0x00000040,
888         AR5K_INT_TXDESC = 0x00000080,
889         AR5K_INT_TXERR  = 0x00000100,
890         AR5K_INT_TXNOFRM = 0x00000200,
891         AR5K_INT_TXEOL  = 0x00000400,
892         AR5K_INT_TXURN  = 0x00000800,
893         AR5K_INT_MIB    = 0x00001000,
894         AR5K_INT_SWI    = 0x00002000,
895         AR5K_INT_RXPHY  = 0x00004000,
896         AR5K_INT_RXKCM  = 0x00008000,
897         AR5K_INT_SWBA   = 0x00010000,
898         AR5K_INT_BRSSI  = 0x00020000,
899         AR5K_INT_BMISS  = 0x00040000,
900         AR5K_INT_FATAL  = 0x00080000, /* Non common */
901         AR5K_INT_BNR    = 0x00100000, /* Non common */
902         AR5K_INT_TIM    = 0x00200000, /* Non common */
903         AR5K_INT_DTIM   = 0x00400000, /* Non common */
904         AR5K_INT_DTIM_SYNC =    0x00800000, /* Non common */
905         AR5K_INT_GPIO   =       0x01000000,
906         AR5K_INT_BCN_TIMEOUT =  0x02000000, /* Non common */
907         AR5K_INT_CAB_TIMEOUT =  0x04000000, /* Non common */
908         AR5K_INT_RX_DOPPLER =   0x08000000, /* Non common */
909         AR5K_INT_QCBRORN =      0x10000000, /* Non common */
910         AR5K_INT_QCBRURN =      0x20000000, /* Non common */
911         AR5K_INT_QTRIG  =       0x40000000, /* Non common */
912         AR5K_INT_GLOBAL =       0x80000000,
913
914         AR5K_INT_COMMON  = AR5K_INT_RXOK
915                 | AR5K_INT_RXDESC
916                 | AR5K_INT_RXERR
917                 | AR5K_INT_RXNOFRM
918                 | AR5K_INT_RXEOL
919                 | AR5K_INT_RXORN
920                 | AR5K_INT_TXOK
921                 | AR5K_INT_TXDESC
922                 | AR5K_INT_TXERR
923                 | AR5K_INT_TXNOFRM
924                 | AR5K_INT_TXEOL
925                 | AR5K_INT_TXURN
926                 | AR5K_INT_MIB
927                 | AR5K_INT_SWI
928                 | AR5K_INT_RXPHY
929                 | AR5K_INT_RXKCM
930                 | AR5K_INT_SWBA
931                 | AR5K_INT_BRSSI
932                 | AR5K_INT_BMISS
933                 | AR5K_INT_GPIO
934                 | AR5K_INT_GLOBAL,
935
936         AR5K_INT_NOCARD = 0xffffffff
937 };
938
939 /*
940  * Power management
941  */
942 enum ath5k_power_mode {
943         AR5K_PM_UNDEFINED = 0,
944         AR5K_PM_AUTO,
945         AR5K_PM_AWAKE,
946         AR5K_PM_FULL_SLEEP,
947         AR5K_PM_NETWORK_SLEEP,
948 };
949
950 /*
951  * These match net80211 definitions (not used in
952  * mac80211).
953  * TODO: Clean this up
954  */
955 #define AR5K_LED_INIT   0 /*IEEE80211_S_INIT*/
956 #define AR5K_LED_SCAN   1 /*IEEE80211_S_SCAN*/
957 #define AR5K_LED_AUTH   2 /*IEEE80211_S_AUTH*/
958 #define AR5K_LED_ASSOC  3 /*IEEE80211_S_ASSOC*/
959 #define AR5K_LED_RUN    4 /*IEEE80211_S_RUN*/
960
961 /* GPIO-controlled software LED */
962 #define AR5K_SOFTLED_PIN        0
963 #define AR5K_SOFTLED_ON         0
964 #define AR5K_SOFTLED_OFF        1
965
966 /*
967  * Chipset capabilities -see ath5k_hw_get_capability-
968  * get_capability function is not yet fully implemented
969  * in ath5k so most of these don't work yet...
970  * TODO: Implement these & merge with _TUNE_ stuff above
971  */
972 enum ath5k_capability_type {
973         AR5K_CAP_REG_DMN                = 0,    /* Used to get current reg. domain id */
974         AR5K_CAP_TKIP_MIC               = 2,    /* Can handle TKIP MIC in hardware */
975         AR5K_CAP_TKIP_SPLIT             = 3,    /* TKIP uses split keys */
976         AR5K_CAP_PHYCOUNTERS            = 4,    /* PHY error counters */
977         AR5K_CAP_DIVERSITY              = 5,    /* Supports fast diversity */
978         AR5K_CAP_NUM_TXQUEUES           = 6,    /* Used to get max number of hw txqueues */
979         AR5K_CAP_VEOL                   = 7,    /* Supports virtual EOL */
980         AR5K_CAP_COMPRESSION            = 8,    /* Supports compression */
981         AR5K_CAP_BURST                  = 9,    /* Supports packet bursting */
982         AR5K_CAP_FASTFRAME              = 10,   /* Supports fast frames */
983         AR5K_CAP_TXPOW                  = 11,   /* Used to get global tx power limit */
984         AR5K_CAP_TPC                    = 12,   /* Can do per-packet tx power control (needed for 802.11a) */
985         AR5K_CAP_BSSIDMASK              = 13,   /* Supports bssid mask */
986         AR5K_CAP_MCAST_KEYSRCH          = 14,   /* Supports multicast key search */
987         AR5K_CAP_TSF_ADJUST             = 15,   /* Supports beacon tsf adjust */
988         AR5K_CAP_XR                     = 16,   /* Supports XR mode */
989         AR5K_CAP_WME_TKIPMIC            = 17,   /* Supports TKIP MIC when using WMM */
990         AR5K_CAP_CHAN_HALFRATE          = 18,   /* Supports half rate channels */
991         AR5K_CAP_CHAN_QUARTERRATE       = 19,   /* Supports quarter rate channels */
992         AR5K_CAP_RFSILENT               = 20,   /* Supports RFsilent */
993 };
994
995
996 /* XXX: we *may* move cap_range stuff to struct wiphy */
997 struct ath5k_capabilities {
998         /*
999          * Supported PHY modes
1000          * (ie. CHANNEL_A, CHANNEL_B, ...)
1001          */
1002         DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX);
1003
1004         /*
1005          * Frequency range (without regulation restrictions)
1006          */
1007         struct {
1008                 u16     range_2ghz_min;
1009                 u16     range_2ghz_max;
1010                 u16     range_5ghz_min;
1011                 u16     range_5ghz_max;
1012         } cap_range;
1013
1014         /*
1015          * Values stored in the EEPROM (some of them...)
1016          */
1017         struct ath5k_eeprom_info        cap_eeprom;
1018
1019         /*
1020          * Queue information
1021          */
1022         struct {
1023                 u8      q_tx_num;
1024         } cap_queues;
1025 };
1026
1027
1028 /***************************************\
1029   HARDWARE ABSTRACTION LAYER STRUCTURE
1030 \***************************************/
1031
1032 /*
1033  * Misc defines
1034  */
1035
1036 #define AR5K_MAX_GPIO           10
1037 #define AR5K_MAX_RF_BANKS       8
1038
1039 /* TODO: Clean up and merge with ath5k_softc */
1040 struct ath5k_hw {
1041         u32                     ah_magic;
1042
1043         struct ath5k_softc      *ah_sc;
1044         void __iomem            *ah_iobase;
1045
1046         enum ath5k_int          ah_imr;
1047
1048         enum nl80211_iftype     ah_op_mode;
1049         enum ath5k_power_mode   ah_power_mode;
1050         struct ieee80211_channel ah_current_channel;
1051         bool                    ah_turbo;
1052         bool                    ah_calibration;
1053         bool                    ah_running;
1054         bool                    ah_single_chip;
1055         bool                    ah_combined_mic;
1056         enum ath5k_rfgain       ah_rf_gain;
1057
1058         u32                     ah_mac_srev;
1059         u16                     ah_mac_version;
1060         u16                     ah_mac_revision;
1061         u16                     ah_phy_revision;
1062         u16                     ah_radio_5ghz_revision;
1063         u16                     ah_radio_2ghz_revision;
1064         u32                     ah_phy_spending;
1065
1066         enum ath5k_version      ah_version;
1067         enum ath5k_radio        ah_radio;
1068         u32                     ah_phy;
1069
1070         bool                    ah_5ghz;
1071         bool                    ah_2ghz;
1072
1073 #define ah_regdomain            ah_capabilities.cap_regdomain.reg_current
1074 #define ah_regdomain_hw         ah_capabilities.cap_regdomain.reg_hw
1075 #define ah_modes                ah_capabilities.cap_mode
1076 #define ah_ee_version           ah_capabilities.cap_eeprom.ee_version
1077
1078         u32                     ah_atim_window;
1079         u32                     ah_aifs;
1080         u32                     ah_cw_min;
1081         u32                     ah_cw_max;
1082         bool                    ah_software_retry;
1083         u32                     ah_limit_tx_retries;
1084
1085         u32                     ah_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
1086         bool                    ah_ant_diversity;
1087
1088         u8                      ah_sta_id[ETH_ALEN];
1089
1090         /* Current BSSID we are trying to assoc to / create.
1091          * This is passed by mac80211 on config_interface() and cached here for
1092          * use in resets */
1093         u8                      ah_bssid[ETH_ALEN];
1094         u8                      ah_bssid_mask[ETH_ALEN];
1095
1096         u32                     ah_gpio[AR5K_MAX_GPIO];
1097         int                     ah_gpio_npins;
1098
1099         struct ath5k_capabilities ah_capabilities;
1100
1101         struct ath5k_txq_info   ah_txq[AR5K_NUM_TX_QUEUES];
1102         u32                     ah_txq_status;
1103         u32                     ah_txq_imr_txok;
1104         u32                     ah_txq_imr_txerr;
1105         u32                     ah_txq_imr_txurn;
1106         u32                     ah_txq_imr_txdesc;
1107         u32                     ah_txq_imr_txeol;
1108         u32                     ah_txq_imr_cbrorn;
1109         u32                     ah_txq_imr_cbrurn;
1110         u32                     ah_txq_imr_qtrig;
1111         u32                     ah_txq_imr_nofrm;
1112         u32                     ah_txq_isr;
1113         u32                     *ah_rf_banks;
1114         size_t                  ah_rf_banks_size;
1115         struct ath5k_gain       ah_gain;
1116         u32                     ah_offset[AR5K_MAX_RF_BANKS];
1117
1118         struct {
1119                 u16             txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE];
1120                 u16             txp_rates[AR5K_MAX_RATES];
1121                 s16             txp_min;
1122                 s16             txp_max;
1123                 bool            txp_tpc;
1124                 s16             txp_ofdm;
1125         } ah_txpower;
1126
1127         struct {
1128                 bool            r_enabled;
1129                 int             r_last_alert;
1130                 struct ieee80211_channel r_last_channel;
1131         } ah_radar;
1132
1133         /* noise floor from last periodic calibration */
1134         s32                     ah_noise_floor;
1135
1136         /*
1137          * Function pointers
1138          */
1139         int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc,
1140                                 u32 size, unsigned int flags);
1141         int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1142                 unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
1143                 unsigned int, unsigned int, unsigned int, unsigned int,
1144                 unsigned int, unsigned int, unsigned int);
1145         int (*ah_setup_mrr_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1146                 unsigned int, unsigned int, unsigned int, unsigned int,
1147                 unsigned int, unsigned int);
1148         int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1149                 struct ath5k_tx_status *);
1150         int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *,
1151                 struct ath5k_rx_status *);
1152 };
1153
1154 /*
1155  * Prototypes
1156  */
1157
1158 /* Attach/Detach Functions */
1159 extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version);
1160 extern void ath5k_hw_detach(struct ath5k_hw *ah);
1161
1162 /* Reset Functions */
1163 extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial);
1164 extern int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, struct ieee80211_channel *channel, bool change_channel);
1165 /* Power management functions */
1166 extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);
1167
1168 /* DMA Related Functions */
1169 extern void ath5k_hw_start_rx_dma(struct ath5k_hw *ah);
1170 extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
1171 extern u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah);
1172 extern void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr);
1173 extern int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue);
1174 extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
1175 extern u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue);
1176 extern int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue,
1177                                 u32 phys_addr);
1178 extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
1179 /* Interrupt handling */
1180 extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
1181 extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
1182 extern enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum
1183 ath5k_int new_mask);
1184 extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats);
1185
1186 /* EEPROM access functions */
1187 extern int ath5k_eeprom_init(struct ath5k_hw *ah);
1188 extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac);
1189
1190 /* Protocol Control Unit Functions */
1191 extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
1192 /* BSSID Functions */
1193 extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac);
1194 extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
1195 extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id);
1196 extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
1197 /* Receive start/stop functions */
1198 extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
1199 extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
1200 /* RX Filter functions */
1201 extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
1202 extern int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
1203 extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
1204 extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
1205 extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
1206 /* Beacon control functions */
1207 extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah);
1208 extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
1209 extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
1210 extern void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval);
1211 #if 0
1212 extern int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, const struct ath5k_beacon_state *state);
1213 extern void ath5k_hw_reset_beacon(struct ath5k_hw *ah);
1214 extern int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr);
1215 #endif
1216 /* ACK bit rate */
1217 void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high);
1218 /* ACK/CTS Timeouts */
1219 extern int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout);
1220 extern unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah);
1221 extern int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout);
1222 extern unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah);
1223 /* Key table (WEP) functions */
1224 extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
1225 extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry);
1226 extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac);
1227 extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac);
1228
1229 /* Queue Control Unit, DFS Control Unit Functions */
1230 extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info);
1231 extern int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
1232                                 const struct ath5k_txq_info *queue_info);
1233 extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah,
1234                                 enum ath5k_tx_queue queue_type,
1235                                 struct ath5k_txq_info *queue_info);
1236 extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
1237 extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
1238 extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
1239 extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah);
1240 extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
1241
1242 /* Hardware Descriptor Functions */
1243 extern int ath5k_hw_init_desc_functions(struct ath5k_hw *ah);
1244
1245 /* GPIO Functions */
1246 extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
1247 extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
1248 extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
1249 extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
1250 extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
1251 extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
1252
1253 /* Misc functions */
1254 int ath5k_hw_set_capabilities(struct ath5k_hw *ah);
1255 extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
1256 extern int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id);
1257 extern int ath5k_hw_disable_pspoll(struct ath5k_hw *ah);
1258
1259 /* Initial register settings functions */
1260 extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
1261
1262 /* Initialize RF */
1263 extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode);
1264 extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq);
1265 extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah);
1266 extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah);
1267 /* PHY/RF channel functions */
1268 extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
1269 extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
1270 /* PHY calibration */
1271 extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
1272 extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
1273 /* Misc PHY functions */
1274 extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
1275 extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant);
1276 extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
1277 extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
1278 /* TX power setup */
1279 extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower);
1280 extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power);
1281
1282 /*
1283  * Functions used internaly
1284  */
1285
1286 /*
1287  * Translate usec to hw clock units
1288  */
1289 static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo)
1290 {
1291         return turbo ? (usec * 80) : (usec * 40);
1292 }
1293
1294 /*
1295  * Translate hw clock units to usec
1296  */
1297 static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo)
1298 {
1299         return turbo ? (clock / 80) : (clock / 40);
1300 }
1301
1302 /*
1303  * Read from a register
1304  */
1305 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
1306 {
1307         return ioread32(ah->ah_iobase + reg);
1308 }
1309
1310 /*
1311  * Write to a register
1312  */
1313 static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
1314 {
1315         iowrite32(val, ah->ah_iobase + reg);
1316 }
1317
1318 #if defined(_ATH5K_RESET) || defined(_ATH5K_PHY)
1319 /*
1320  * Check if a register write has been completed
1321  */
1322 static int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag,
1323                 u32 val, bool is_set)
1324 {
1325         int i;
1326         u32 data;
1327
1328         for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) {
1329                 data = ath5k_hw_reg_read(ah, reg);
1330                 if (is_set && (data & flag))
1331                         break;
1332                 else if ((data & flag) == val)
1333                         break;
1334                 udelay(15);
1335         }
1336
1337         return (i <= 0) ? -EAGAIN : 0;
1338 }
1339 #endif
1340
1341 static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
1342 {
1343         u32 retval = 0, bit, i;
1344
1345         for (i = 0; i < bits; i++) {
1346                 bit = (val >> i) & 1;
1347                 retval = (retval << 1) | bit;
1348         }
1349
1350         return retval;
1351 }
1352
1353 static inline int ath5k_pad_size(int hdrlen)
1354 {
1355         return (hdrlen < 24) ? 0 : hdrlen & 3;
1356 }
1357
1358 #endif