ath9k: Remove dead code in rate control
[pandora-kernel.git] / drivers / net / wireless / ath / ath9k / rc.c
1 /*
2  * Copyright (c) 2004 Video54 Technologies, Inc.
3  * Copyright (c) 2004-2009 Atheros Communications, Inc.
4  *
5  * Permission to use, copy, modify, and/or distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  */
17
18 #include "ath9k.h"
19
20 static const struct ath_rate_table ar5416_11na_ratetable = {
21         42,
22         {
23                 { VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
24                         5400, 0x0b, 0x00, 12,
25                         0, 2, 1, 0, 0, 0, 0, 0 },
26                 { VALID, VALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */
27                         7800,  0x0f, 0x00, 18,
28                         0, 3, 1, 1, 1, 1, 1, 0 },
29                 { VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */
30                         10000, 0x0a, 0x00, 24,
31                         2, 4, 2, 2, 2, 2, 2, 0 },
32                 { VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */
33                         13900, 0x0e, 0x00, 36,
34                         2, 6,  2, 3, 3, 3, 3, 0 },
35                 { VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */
36                         17300, 0x09, 0x00, 48,
37                         4, 10, 3, 4, 4, 4, 4, 0 },
38                 { VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */
39                         23000, 0x0d, 0x00, 72,
40                         4, 14, 3, 5, 5, 5, 5, 0 },
41                 { VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */
42                         27400, 0x08, 0x00, 96,
43                         4, 20, 3, 6, 6, 6, 6, 0 },
44                 { VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */
45                         29300, 0x0c, 0x00, 108,
46                         4, 23, 3, 7, 7, 7, 7, 0 },
47                 { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 6500, /* 6.5 Mb */
48                         6400, 0x80, 0x00, 0,
49                         0, 2, 3, 8, 24, 8, 24, 3216 },
50                 { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 13000, /* 13 Mb */
51                         12700, 0x81, 0x00, 1,
52                         2, 4, 3, 9, 25, 9, 25, 6434 },
53                 { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 19500, /* 19.5 Mb */
54                         18800, 0x82, 0x00, 2,
55                         2, 6, 3, 10, 26, 10, 26, 9650 },
56                 { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 26000, /* 26 Mb */
57                         25000, 0x83, 0x00, 3,
58                         4, 10, 3, 11, 27, 11, 27, 12868 },
59                 { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 39000, /* 39 Mb */
60                         36700, 0x84, 0x00, 4,
61                         4, 14, 3, 12, 28, 12, 28, 19304 },
62                 { INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 52000, /* 52 Mb */
63                         48100, 0x85, 0x00, 5,
64                         4, 20, 3, 13, 29, 13, 29, 25740 },
65                 { INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 58500, /* 58.5 Mb */
66                         53500, 0x86, 0x00, 6,
67                         4, 23, 3, 14, 30, 14, 30,  28956 },
68                 { INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 65000, /* 65 Mb */
69                         59000, 0x87, 0x00, 7,
70                         4, 25, 3, 15, 31, 15, 32, 32180 },
71                 { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 13000, /* 13 Mb */
72                         12700, 0x88, 0x00,
73                         8, 0, 2, 3, 16, 33, 16, 33, 6430 },
74                 { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 26000, /* 26 Mb */
75                         24800, 0x89, 0x00, 9,
76                         2, 4, 3, 17, 34, 17, 34, 12860 },
77                 { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 39000, /* 39 Mb */
78                         36600, 0x8a, 0x00, 10,
79                         2, 6, 3, 18, 35, 18, 35, 19300 },
80                 { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 52000, /* 52 Mb */
81                         48100, 0x8b, 0x00, 11,
82                         4, 10, 3, 19, 36, 19, 36, 25736 },
83                 { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 78000, /* 78 Mb */
84                         69500, 0x8c, 0x00, 12,
85                         4, 14, 3, 20, 37, 20, 37, 38600 },
86                 { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 104000, /* 104 Mb */
87                         89500, 0x8d, 0x00, 13,
88                         4, 20, 3, 21, 38, 21, 38, 51472 },
89                 { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 117000, /* 117 Mb */
90                         98900, 0x8e, 0x00, 14,
91                         4, 23, 3, 22, 39, 22, 39, 57890 },
92                 { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 130000, /* 130 Mb */
93                         108300, 0x8f, 0x00, 15,
94                         4, 25, 3, 23, 40, 23, 41, 64320 },
95                 { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 13500, /* 13.5 Mb */
96                         13200, 0x80, 0x00, 0,
97                         0, 2, 3, 8, 24, 24, 24, 6684 },
98                 { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 27500, /* 27.0 Mb */
99                         25900, 0x81, 0x00, 1,
100                         2, 4, 3, 9, 25, 25, 25, 13368 },
101                 { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 40500, /* 40.5 Mb */
102                         38600, 0x82, 0x00, 2,
103                         2, 6, 3, 10, 26, 26, 26, 20052 },
104                 { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 54000, /* 54 Mb */
105                         49800, 0x83, 0x00, 3,
106                         4, 10, 3, 11, 27, 27, 27, 26738 },
107                 { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 81500, /* 81 Mb */
108                         72200, 0x84, 0x00, 4,
109                         4, 14, 3, 12, 28, 28, 28, 40104 },
110                 { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 108000, /* 108 Mb */
111                         92900, 0x85, 0x00, 5,
112                         4, 20, 3, 13, 29, 29, 29, 53476 },
113                 { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 121500, /* 121.5 Mb */
114                         102700, 0x86, 0x00, 6,
115                         4, 23, 3, 14, 30, 30, 30, 60156 },
116                 { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 135000, /* 135 Mb */
117                         112000, 0x87, 0x00, 7,
118                         4, 25, 3, 15, 31, 32, 32, 66840 },
119                 { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS_HGI, 150000, /* 150 Mb */
120                         122000, 0x87, 0x00, 7,
121                         4, 25, 3, 15, 31, 32, 32, 74200 },
122                 { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 27000, /* 27 Mb */
123                         25800, 0x88, 0x00, 8,
124                         0, 2, 3, 16, 33, 33, 33, 13360 },
125                 { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 54000, /* 54 Mb */
126                         49800, 0x89, 0x00, 9,
127                         2, 4, 3, 17, 34, 34, 34, 26720 },
128                 { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 81000, /* 81 Mb */
129                         71900, 0x8a, 0x00, 10,
130                         2, 6, 3, 18, 35, 35, 35, 40080 },
131                 { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 108000, /* 108 Mb */
132                         92500, 0x8b, 0x00, 11,
133                         4, 10, 3, 19, 36, 36, 36, 53440 },
134                 { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 162000, /* 162 Mb */
135                         130300, 0x8c, 0x00, 12,
136                         4, 14, 3, 20, 37, 37, 37, 80160 },
137                 { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 216000, /* 216 Mb */
138                         162800, 0x8d, 0x00, 13,
139                         4, 20, 3, 21, 38, 38, 38, 106880 },
140                 { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 243000, /* 243 Mb */
141                         178200, 0x8e, 0x00, 14,
142                         4, 23, 3, 22, 39, 39, 39, 120240 },
143                 { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 270000, /* 270 Mb */
144                         192100, 0x8f, 0x00, 15,
145                         4, 25, 3, 23, 40, 41, 41, 133600 },
146                 { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS_HGI, 300000, /* 300 Mb */
147                         207000, 0x8f, 0x00, 15,
148                         4, 25, 3, 23, 40, 41, 41, 148400 },
149         },
150         50,  /* probe interval */
151         50,  /* rssi reduce interval */
152         WLAN_RC_HT_FLAG,  /* Phy rates allowed initially */
153 };
154
155 /* 4ms frame limit not used for NG mode.  The values filled
156  * for HT are the 64K max aggregate limit */
157
158 static const struct ath_rate_table ar5416_11ng_ratetable = {
159         46,
160         {
161                 { VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
162                         900, 0x1b, 0x00, 2,
163                         0, 0, 1, 0, 0, 0, 0, 0 },
164                 { VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 2000, /* 2 Mb */
165                         1900, 0x1a, 0x04, 4,
166                         1, 1, 1, 1, 1, 1, 1, 0 },
167                 { VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 5500, /* 5.5 Mb */
168                         4900, 0x19, 0x04, 11,
169                         2, 2, 2, 2, 2, 2, 2, 0 },
170                 { VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 11000, /* 11 Mb */
171                         8100, 0x18, 0x04, 22,
172                         3, 3, 2, 3, 3, 3, 3, 0 },
173                 { INVALID, INVALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
174                         5400, 0x0b, 0x00, 12,
175                         4, 2, 1, 4, 4, 4, 4, 0 },
176                 { INVALID, INVALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */
177                         7800, 0x0f, 0x00, 18,
178                         4, 3, 1, 5, 5, 5, 5, 0 },
179                 { VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */
180                         10100, 0x0a, 0x00, 24,
181                         6, 4, 1, 6, 6, 6, 6, 0 },
182                 { VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */
183                         14100,  0x0e, 0x00, 36,
184                         6, 6, 2, 7, 7, 7, 7, 0 },
185                 { VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */
186                         17700, 0x09, 0x00, 48,
187                         8, 10, 3, 8, 8, 8, 8, 0 },
188                 { VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */
189                         23700, 0x0d, 0x00, 72,
190                         8, 14, 3, 9, 9, 9, 9, 0 },
191                 { VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */
192                         27400, 0x08, 0x00, 96,
193                         8, 20, 3, 10, 10, 10, 10, 0 },
194                 { VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */
195                         30900, 0x0c, 0x00, 108,
196                         8, 23, 3, 11, 11, 11, 11, 0 },
197                 { INVALID, INVALID, WLAN_RC_PHY_HT_20_SS, 6500, /* 6.5 Mb */
198                         6400, 0x80, 0x00, 0,
199                         4, 2, 3, 12, 28, 12, 28, 3216 },
200                 { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 13000, /* 13 Mb */
201                         12700, 0x81, 0x00, 1,
202                         6, 4, 3, 13, 29, 13, 29, 6434 },
203                 { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 19500, /* 19.5 Mb */
204                         18800, 0x82, 0x00, 2,
205                         6, 6, 3, 14, 30, 14, 30, 9650 },
206                 { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 26000, /* 26 Mb */
207                         25000, 0x83, 0x00, 3,
208                         8, 10, 3, 15, 31, 15, 31, 12868 },
209                 { VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 39000, /* 39 Mb */
210                         36700, 0x84, 0x00, 4,
211                         8, 14, 3, 16, 32, 16, 32, 19304 },
212                 { INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 52000, /* 52 Mb */
213                         48100, 0x85, 0x00, 5,
214                         8, 20, 3, 17, 33, 17, 33, 25740 },
215                 { INVALID,  VALID_20, WLAN_RC_PHY_HT_20_SS, 58500, /* 58.5 Mb */
216                         53500, 0x86, 0x00, 6,
217                         8, 23, 3, 18, 34, 18, 34, 28956 },
218                 { INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 65000, /* 65 Mb */
219                         59000, 0x87, 0x00, 7,
220                         8, 25, 3, 19, 35, 19, 36, 32180 },
221                 { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 13000, /* 13 Mb */
222                         12700, 0x88, 0x00, 8,
223                         4, 2, 3, 20, 37, 20, 37, 6430 },
224                 { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 26000, /* 26 Mb */
225                         24800, 0x89, 0x00, 9,
226                         6, 4, 3, 21, 38, 21, 38, 12860 },
227                 { INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 39000, /* 39 Mb */
228                         36600, 0x8a, 0x00, 10,
229                         6, 6, 3, 22, 39, 22, 39, 19300 },
230                 { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 52000, /* 52 Mb */
231                         48100, 0x8b, 0x00, 11,
232                         8, 10, 3, 23, 40, 23, 40, 25736 },
233                 { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 78000, /* 78 Mb */
234                         69500, 0x8c, 0x00, 12,
235                         8, 14, 3, 24, 41, 24, 41, 38600 },
236                 { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 104000, /* 104 Mb */
237                         89500, 0x8d, 0x00, 13,
238                         8, 20, 3, 25, 42, 25, 42, 51472 },
239                 { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 117000, /* 117 Mb */
240                         98900, 0x8e, 0x00, 14,
241                         8, 23, 3, 26, 43, 26, 44, 57890 },
242                 { VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 130000, /* 130 Mb */
243                         108300, 0x8f, 0x00, 15,
244                         8, 25, 3, 27, 44, 27, 45, 64320 },
245                 { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 13500, /* 13.5 Mb */
246                         13200, 0x80, 0x00, 0,
247                         8, 2, 3, 12, 28, 28, 28, 6684 },
248                 { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 27500, /* 27.0 Mb */
249                         25900, 0x81, 0x00, 1,
250                         8, 4, 3, 13, 29, 29, 29, 13368 },
251                 { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 40500, /* 40.5 Mb */
252                         38600, 0x82, 0x00, 2,
253                         8, 6, 3, 14, 30, 30, 30, 20052 },
254                 { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 54000, /* 54 Mb */
255                         49800, 0x83, 0x00, 3,
256                         8, 10, 3, 15, 31, 31, 31, 26738 },
257                 { VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 81500, /* 81 Mb */
258                         72200, 0x84, 0x00, 4,
259                         8, 14, 3, 16, 32, 32, 32, 40104 },
260                 { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 108000, /* 108 Mb */
261                         92900, 0x85, 0x00, 5,
262                         8, 20, 3, 17, 33, 33, 33, 53476 },
263                 { INVALID,  VALID_40, WLAN_RC_PHY_HT_40_SS, 121500, /* 121.5 Mb */
264                         102700, 0x86, 0x00, 6,
265                         8, 23, 3, 18, 34, 34, 34, 60156 },
266                 { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 135000, /* 135 Mb */
267                         112000, 0x87, 0x00, 7,
268                         8, 23, 3, 19, 35, 36, 36, 66840 },
269                 { INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS_HGI, 150000, /* 150 Mb */
270                         122000, 0x87, 0x00, 7,
271                         8, 25, 3, 19, 35, 36, 36, 74200 },
272                 { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 27000, /* 27 Mb */
273                         25800, 0x88, 0x00, 8,
274                         8, 2, 3, 20, 37, 37, 37, 13360 },
275                 { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 54000, /* 54 Mb */
276                         49800, 0x89, 0x00, 9,
277                         8, 4, 3, 21, 38, 38, 38, 26720 },
278                 { INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 81000, /* 81 Mb */
279                         71900, 0x8a, 0x00, 10,
280                         8, 6, 3, 22, 39, 39, 39, 40080 },
281                 { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 108000, /* 108 Mb */
282                         92500, 0x8b, 0x00, 11,
283                         8, 10, 3, 23, 40, 40, 40, 53440 },
284                 { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 162000, /* 162 Mb */
285                         130300, 0x8c, 0x00, 12,
286                         8, 14, 3, 24, 41, 41, 41, 80160 },
287                 { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 216000, /* 216 Mb */
288                         162800, 0x8d, 0x00, 13,
289                         8, 20, 3, 25, 42, 42, 42, 106880 },
290                 { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 243000, /* 243 Mb */
291                         178200, 0x8e, 0x00, 14,
292                         8, 23, 3, 26, 43, 43, 43, 120240 },
293                 { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 270000, /* 270 Mb */
294                         192100, 0x8f, 0x00, 15,
295                         8, 23, 3, 27, 44, 45, 45, 133600 },
296                 { VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS_HGI, 300000, /* 300 Mb */
297                         207000, 0x8f, 0x00, 15,
298                         8, 25, 3, 27, 44, 45, 45, 148400 },
299                 },
300         50,  /* probe interval */
301         50,  /* rssi reduce interval */
302         WLAN_RC_HT_FLAG,  /* Phy rates allowed initially */
303 };
304
305 static const struct ath_rate_table ar5416_11a_ratetable = {
306         8,
307         {
308                 { VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
309                         5400, 0x0b, 0x00, (0x80|12),
310                         0, 2, 1, 0, 0 },
311                 { VALID, VALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */
312                         7800, 0x0f, 0x00, 18,
313                         0, 3, 1, 1, 0 },
314                 { VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */
315                         10000, 0x0a, 0x00, (0x80|24),
316                         2, 4, 2, 2, 0 },
317                 { VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */
318                         13900, 0x0e, 0x00, 36,
319                         2, 6, 2, 3, 0 },
320                 { VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */
321                         17300, 0x09, 0x00, (0x80|48),
322                         4, 10, 3, 4, 0 },
323                 { VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */
324                         23000, 0x0d, 0x00, 72,
325                         4, 14, 3, 5, 0 },
326                 { VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */
327                         27400, 0x08, 0x00, 96,
328                         4, 19, 3, 6, 0 },
329                 { VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */
330                         29300, 0x0c, 0x00, 108,
331                         4, 23, 3, 7, 0 },
332         },
333         50,  /* probe interval */
334         50,  /* rssi reduce interval */
335         0,   /* Phy rates allowed initially */
336 };
337
338 static const struct ath_rate_table ar5416_11g_ratetable = {
339         12,
340         {
341                 { VALID, VALID, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
342                         900, 0x1b, 0x00, 2,
343                         0, 0, 1, 0, 0 },
344                 { VALID, VALID, WLAN_RC_PHY_CCK, 2000, /* 2 Mb */
345                         1900, 0x1a, 0x04, 4,
346                         1, 1, 1, 1, 0 },
347                 { VALID, VALID, WLAN_RC_PHY_CCK, 5500, /* 5.5 Mb */
348                         4900, 0x19, 0x04, 11,
349                         2, 2, 2, 2, 0 },
350                 { VALID, VALID, WLAN_RC_PHY_CCK, 11000, /* 11 Mb */
351                         8100, 0x18, 0x04, 22,
352                         3, 3, 2, 3, 0 },
353                 { INVALID, INVALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
354                         5400, 0x0b, 0x00, 12,
355                         4, 2, 1, 4, 0 },
356                 { INVALID, INVALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */
357                         7800, 0x0f, 0x00, 18,
358                         4, 3, 1, 5, 0 },
359                 { VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */
360                         10000, 0x0a, 0x00, 24,
361                         6, 4, 1, 6, 0 },
362                 { VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */
363                         13900, 0x0e, 0x00, 36,
364                         6, 6, 2, 7, 0 },
365                 { VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */
366                         17300, 0x09, 0x00, 48,
367                         8, 10, 3, 8, 0 },
368                 { VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */
369                         23000, 0x0d, 0x00, 72,
370                         8, 14, 3, 9, 0 },
371                 { VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */
372                         27400, 0x08, 0x00, 96,
373                         8, 19, 3, 10, 0 },
374                 { VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */
375                         29300, 0x0c, 0x00, 108,
376                         8, 23, 3, 11, 0 },
377         },
378         50,  /* probe interval */
379         50,  /* rssi reduce interval */
380         0,   /* Phy rates allowed initially */
381 };
382
383 static inline int8_t median(int8_t a, int8_t b, int8_t c)
384 {
385         if (a >= b) {
386                 if (b >= c)
387                         return b;
388                 else if (a > c)
389                         return c;
390                 else
391                         return a;
392         } else {
393                 if (a >= c)
394                         return a;
395                 else if (b >= c)
396                         return c;
397                 else
398                         return b;
399         }
400 }
401
402 static void ath_rc_sort_validrates(const struct ath_rate_table *rate_table,
403                                    struct ath_rate_priv *ath_rc_priv)
404 {
405         u8 i, j, idx, idx_next;
406
407         for (i = ath_rc_priv->max_valid_rate - 1; i > 0; i--) {
408                 for (j = 0; j <= i-1; j++) {
409                         idx = ath_rc_priv->valid_rate_index[j];
410                         idx_next = ath_rc_priv->valid_rate_index[j+1];
411
412                         if (rate_table->info[idx].ratekbps >
413                                 rate_table->info[idx_next].ratekbps) {
414                                 ath_rc_priv->valid_rate_index[j] = idx_next;
415                                 ath_rc_priv->valid_rate_index[j+1] = idx;
416                         }
417                 }
418         }
419 }
420
421 static void ath_rc_init_valid_txmask(struct ath_rate_priv *ath_rc_priv)
422 {
423         u8 i;
424
425         for (i = 0; i < ath_rc_priv->rate_table_size; i++)
426                 ath_rc_priv->valid_rate_index[i] = 0;
427 }
428
429 static inline void ath_rc_set_valid_txmask(struct ath_rate_priv *ath_rc_priv,
430                                            u8 index, int valid_tx_rate)
431 {
432         ASSERT(index <= ath_rc_priv->rate_table_size);
433         ath_rc_priv->valid_rate_index[index] = valid_tx_rate ? 1 : 0;
434 }
435
436 static inline
437 int ath_rc_get_nextvalid_txrate(const struct ath_rate_table *rate_table,
438                                 struct ath_rate_priv *ath_rc_priv,
439                                 u8 cur_valid_txrate,
440                                 u8 *next_idx)
441 {
442         u8 i;
443
444         for (i = 0; i < ath_rc_priv->max_valid_rate - 1; i++) {
445                 if (ath_rc_priv->valid_rate_index[i] == cur_valid_txrate) {
446                         *next_idx = ath_rc_priv->valid_rate_index[i+1];
447                         return 1;
448                 }
449         }
450
451         /* No more valid rates */
452         *next_idx = 0;
453
454         return 0;
455 }
456
457 /* Return true only for single stream */
458
459 static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw)
460 {
461         if (WLAN_RC_PHY_HT(phy) && !(capflag & WLAN_RC_HT_FLAG))
462                 return 0;
463         if (WLAN_RC_PHY_DS(phy) && !(capflag & WLAN_RC_DS_FLAG))
464                 return 0;
465         if (WLAN_RC_PHY_SGI(phy) && !(capflag & WLAN_RC_SGI_FLAG))
466                 return 0;
467         if (!ignore_cw && WLAN_RC_PHY_HT(phy))
468                 if (WLAN_RC_PHY_40(phy) && !(capflag & WLAN_RC_40_FLAG))
469                         return 0;
470                 if (!WLAN_RC_PHY_40(phy) && (capflag & WLAN_RC_40_FLAG))
471                         return 0;
472         return 1;
473 }
474
475 static inline int
476 ath_rc_get_lower_rix(const struct ath_rate_table *rate_table,
477                      struct ath_rate_priv *ath_rc_priv,
478                      u8 cur_valid_txrate, u8 *next_idx)
479 {
480         int8_t i;
481
482         for (i = 1; i < ath_rc_priv->max_valid_rate ; i++) {
483                 if (ath_rc_priv->valid_rate_index[i] == cur_valid_txrate) {
484                         *next_idx = ath_rc_priv->valid_rate_index[i-1];
485                         return 1;
486                 }
487         }
488
489         return 0;
490 }
491
492 static u8 ath_rc_init_validrates(struct ath_rate_priv *ath_rc_priv,
493                                  const struct ath_rate_table *rate_table,
494                                  u32 capflag)
495 {
496         u8 i, hi = 0;
497         u32 valid;
498
499         for (i = 0; i < rate_table->rate_cnt; i++) {
500                 valid = (!(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG) ?
501                          rate_table->info[i].valid_single_stream :
502                          rate_table->info[i].valid);
503                 if (valid == 1) {
504                         u32 phy = rate_table->info[i].phy;
505                         u8 valid_rate_count = 0;
506
507                         if (!ath_rc_valid_phyrate(phy, capflag, 0))
508                                 continue;
509
510                         valid_rate_count = ath_rc_priv->valid_phy_ratecnt[phy];
511
512                         ath_rc_priv->valid_phy_rateidx[phy][valid_rate_count] = i;
513                         ath_rc_priv->valid_phy_ratecnt[phy] += 1;
514                         ath_rc_set_valid_txmask(ath_rc_priv, i, 1);
515                         hi = A_MAX(hi, i);
516                 }
517         }
518
519         return hi;
520 }
521
522 static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv,
523                                 const struct ath_rate_table *rate_table,
524                                 struct ath_rateset *rateset,
525                                 u32 capflag)
526 {
527         u8 i, j, hi = 0;
528
529         /* Use intersection of working rates and valid rates */
530         for (i = 0; i < rateset->rs_nrates; i++) {
531                 for (j = 0; j < rate_table->rate_cnt; j++) {
532                         u32 phy = rate_table->info[j].phy;
533                         u32 valid = (!(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG) ?
534                                      rate_table->info[j].valid_single_stream :
535                                      rate_table->info[j].valid);
536                         u8 rate = rateset->rs_rates[i];
537                         u8 dot11rate = rate_table->info[j].dot11rate;
538
539                         /* We allow a rate only if its valid and the
540                          * capflag matches one of the validity
541                          * (VALID/VALID_20/VALID_40) flags */
542
543                         if (((rate & 0x7F) == (dot11rate & 0x7F)) &&
544                             ((valid & WLAN_RC_CAP_MODE(capflag)) ==
545                              WLAN_RC_CAP_MODE(capflag)) &&
546                             !WLAN_RC_PHY_HT(phy)) {
547                                 u8 valid_rate_count = 0;
548
549                                 if (!ath_rc_valid_phyrate(phy, capflag, 0))
550                                         continue;
551
552                                 valid_rate_count =
553                                         ath_rc_priv->valid_phy_ratecnt[phy];
554
555                                 ath_rc_priv->valid_phy_rateidx[phy]
556                                         [valid_rate_count] = j;
557                                 ath_rc_priv->valid_phy_ratecnt[phy] += 1;
558                                 ath_rc_set_valid_txmask(ath_rc_priv, j, 1);
559                                 hi = A_MAX(hi, j);
560                         }
561                 }
562         }
563
564         return hi;
565 }
566
567 static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv,
568                                   const struct ath_rate_table *rate_table,
569                                   u8 *mcs_set, u32 capflag)
570 {
571         struct ath_rateset *rateset = (struct ath_rateset *)mcs_set;
572
573         u8 i, j, hi = 0;
574
575         /* Use intersection of working rates and valid rates */
576         for (i = 0; i < rateset->rs_nrates; i++) {
577                 for (j = 0; j < rate_table->rate_cnt; j++) {
578                         u32 phy = rate_table->info[j].phy;
579                         u32 valid = (!(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG) ?
580                                      rate_table->info[j].valid_single_stream :
581                                      rate_table->info[j].valid);
582                         u8 rate = rateset->rs_rates[i];
583                         u8 dot11rate = rate_table->info[j].dot11rate;
584
585                         if (((rate & 0x7F) != (dot11rate & 0x7F)) ||
586                             !WLAN_RC_PHY_HT(phy) ||
587                             !WLAN_RC_PHY_HT_VALID(valid, capflag))
588                                 continue;
589
590                         if (!ath_rc_valid_phyrate(phy, capflag, 0))
591                                 continue;
592
593                         ath_rc_priv->valid_phy_rateidx[phy]
594                                 [ath_rc_priv->valid_phy_ratecnt[phy]] = j;
595                         ath_rc_priv->valid_phy_ratecnt[phy] += 1;
596                         ath_rc_set_valid_txmask(ath_rc_priv, j, 1);
597                         hi = A_MAX(hi, j);
598                 }
599         }
600
601         return hi;
602 }
603
604 /* Finds the highest rate index we can use */
605 static u8 ath_rc_get_highest_rix(struct ath_softc *sc,
606                                  struct ath_rate_priv *ath_rc_priv,
607                                  const struct ath_rate_table *rate_table,
608                                  int *is_probing)
609 {
610         u32 best_thruput, this_thruput, now_msec;
611         u8 rate, next_rate, best_rate, maxindex, minindex;
612         int8_t index = 0;
613
614         now_msec = jiffies_to_msecs(jiffies);
615         *is_probing = 0;
616         best_thruput = 0;
617         maxindex = ath_rc_priv->max_valid_rate-1;
618         minindex = 0;
619         best_rate = minindex;
620
621         /*
622          * Try the higher rate first. It will reduce memory moving time
623          * if we have very good channel characteristics.
624          */
625         for (index = maxindex; index >= minindex ; index--) {
626                 u8 per_thres;
627
628                 rate = ath_rc_priv->valid_rate_index[index];
629                 if (rate > ath_rc_priv->rate_max_phy)
630                         continue;
631
632                 /*
633                  * For TCP the average collision rate is around 11%,
634                  * so we ignore PERs less than this.  This is to
635                  * prevent the rate we are currently using (whose
636                  * PER might be in the 10-15 range because of TCP
637                  * collisions) looking worse than the next lower
638                  * rate whose PER has decayed close to 0.  If we
639                  * used to next lower rate, its PER would grow to
640                  * 10-15 and we would be worse off then staying
641                  * at the current rate.
642                  */
643                 per_thres = ath_rc_priv->state[rate].per;
644                 if (per_thres < 12)
645                         per_thres = 12;
646
647                 this_thruput = rate_table->info[rate].user_ratekbps *
648                         (100 - per_thres);
649
650                 if (best_thruput <= this_thruput) {
651                         best_thruput = this_thruput;
652                         best_rate    = rate;
653                 }
654         }
655
656         rate = best_rate;
657
658         /*
659          * Must check the actual rate (ratekbps) to account for
660          * non-monoticity of 11g's rate table
661          */
662
663         if (rate >= ath_rc_priv->rate_max_phy) {
664                 rate = ath_rc_priv->rate_max_phy;
665
666                 /* Probe the next allowed phy state */
667                 if (ath_rc_get_nextvalid_txrate(rate_table,
668                                         ath_rc_priv, rate, &next_rate) &&
669                     (now_msec - ath_rc_priv->probe_time >
670                      rate_table->probe_interval) &&
671                     (ath_rc_priv->hw_maxretry_pktcnt >= 1)) {
672                         rate = next_rate;
673                         ath_rc_priv->probe_rate = rate;
674                         ath_rc_priv->probe_time = now_msec;
675                         ath_rc_priv->hw_maxretry_pktcnt = 0;
676                         *is_probing = 1;
677                 }
678         }
679
680         if (rate > (ath_rc_priv->rate_table_size - 1))
681                 rate = ath_rc_priv->rate_table_size - 1;
682
683         if (rate_table->info[rate].valid &&
684             (ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG))
685                 return rate;
686
687         if (rate_table->info[rate].valid_single_stream &&
688             !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG));
689                 return rate;
690
691         /* This should not happen */
692         WARN_ON(1);
693
694         rate = ath_rc_priv->valid_rate_index[0];
695
696         return rate;
697 }
698
699 static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table,
700                                    struct ieee80211_tx_rate *rate,
701                                    struct ieee80211_tx_rate_control *txrc,
702                                    u8 tries, u8 rix, int rtsctsenable)
703 {
704         rate->count = tries;
705         rate->idx = rix;
706
707         if (txrc->short_preamble)
708                 rate->flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE;
709         if (txrc->rts || rtsctsenable)
710                 rate->flags |= IEEE80211_TX_RC_USE_RTS_CTS;
711         if (WLAN_RC_PHY_40(rate_table->info[rix].phy))
712                 rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
713         if (WLAN_RC_PHY_SGI(rate_table->info[rix].phy))
714                 rate->flags |= IEEE80211_TX_RC_SHORT_GI;
715         if (WLAN_RC_PHY_HT(rate_table->info[rix].phy))
716                 rate->flags |= IEEE80211_TX_RC_MCS;
717 }
718
719 static void ath_rc_rate_set_rtscts(struct ath_softc *sc,
720                                    const struct ath_rate_table *rate_table,
721                                    struct ieee80211_tx_info *tx_info)
722 {
723         struct ieee80211_tx_rate *rates = tx_info->control.rates;
724         int i = 0, rix = 0, cix, enable_g_protection = 0;
725
726         /* get the cix for the lowest valid rix */
727         for (i = 3; i >= 0; i--) {
728                 if (rates[i].count && (rates[i].idx >= 0)) {
729                         rix = rates[i].idx;
730                         break;
731                 }
732         }
733         cix = rate_table->info[rix].ctrl_rate;
734
735         /* All protection frames are transmited at 2Mb/s for 802.11g,
736          * otherwise we transmit them at 1Mb/s */
737         if (sc->hw->conf.channel->band == IEEE80211_BAND_2GHZ &&
738             !conf_is_ht(&sc->hw->conf))
739                 enable_g_protection = 1;
740
741         /*
742          * If 802.11g protection is enabled, determine whether to use RTS/CTS or
743          * just CTS.  Note that this is only done for OFDM/HT unicast frames.
744          */
745         if ((sc->sc_flags & SC_OP_PROTECT_ENABLE) &&
746             (rate_table->info[rix].phy == WLAN_RC_PHY_OFDM ||
747              WLAN_RC_PHY_HT(rate_table->info[rix].phy))) {
748                 rates[0].flags |= IEEE80211_TX_RC_USE_CTS_PROTECT;
749                 cix = rate_table->info[enable_g_protection].ctrl_rate;
750         }
751
752         tx_info->control.rts_cts_rate_idx = cix;
753 }
754
755 static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
756                          struct ieee80211_tx_rate_control *txrc)
757 {
758         struct ath_softc *sc = priv;
759         struct ath_rate_priv *ath_rc_priv = priv_sta;
760         const struct ath_rate_table *rate_table;
761         struct sk_buff *skb = txrc->skb;
762         struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
763         struct ieee80211_tx_rate *rates = tx_info->control.rates;
764         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
765         __le16 fc = hdr->frame_control;
766         u8 try_per_rate, i = 0, rix, nrix;
767         int is_probe = 0;
768
769         if (rate_control_send_low(sta, priv_sta, txrc))
770                 return;
771
772         /*
773          * For Multi Rate Retry we use a different number of
774          * retry attempt counts. This ends up looking like this:
775          *
776          * MRR[0] = 2
777          * MRR[1] = 2
778          * MRR[2] = 2
779          * MRR[3] = 4
780          *
781          */
782         try_per_rate = sc->hw->max_rate_tries;
783
784         rate_table = sc->cur_rate_table;
785         rix = ath_rc_get_highest_rix(sc, ath_rc_priv, rate_table, &is_probe);
786         nrix = rix;
787
788         if (is_probe) {
789                 /* set one try for probe rates. For the
790                  * probes don't enable rts */
791                 ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
792                                        1, nrix, 0);
793
794                 /* Get the next tried/allowed rate. No RTS for the next series
795                  * after the probe rate
796                  */
797                 ath_rc_get_lower_rix(rate_table, ath_rc_priv, rix, &nrix);
798                 ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
799                                        try_per_rate, nrix, 0);
800
801                 tx_info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
802         } else {
803                 /* Set the choosen rate. No RTS for first series entry. */
804                 ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
805                                        try_per_rate, nrix, 0);
806         }
807
808         /* Fill in the other rates for multirate retry */
809         for ( ; i < 4; i++) {
810                 /* Use twice the number of tries for the last MRR segment. */
811                 if (i + 1 == 4)
812                         try_per_rate = 4;
813
814                 ath_rc_get_lower_rix(rate_table, ath_rc_priv, rix, &nrix);
815                 /* All other rates in the series have RTS enabled */
816                 ath_rc_rate_set_series(rate_table, &rates[i], txrc,
817                                        try_per_rate, nrix, 1);
818         }
819
820         /*
821          * NB:Change rate series to enable aggregation when operating
822          * at lower MCS rates. When first rate in series is MCS2
823          * in HT40 @ 2.4GHz, series should look like:
824          *
825          * {MCS2, MCS1, MCS0, MCS0}.
826          *
827          * When first rate in series is MCS3 in HT20 @ 2.4GHz, series should
828          * look like:
829          *
830          * {MCS3, MCS2, MCS1, MCS1}
831          *
832          * So, set fourth rate in series to be same as third one for
833          * above conditions.
834          */
835         if ((sc->hw->conf.channel->band == IEEE80211_BAND_2GHZ) &&
836             (conf_is_ht(&sc->hw->conf))) {
837                 u8 dot11rate = rate_table->info[rix].dot11rate;
838                 u8 phy = rate_table->info[rix].phy;
839                 if (i == 4 &&
840                     ((dot11rate == 2 && phy == WLAN_RC_PHY_HT_40_SS) ||
841                      (dot11rate == 3 && phy == WLAN_RC_PHY_HT_20_SS))) {
842                         rates[3].idx = rates[2].idx;
843                         rates[3].flags = rates[2].flags;
844                 }
845         }
846
847         /*
848          * Force hardware to use computed duration for next
849          * fragment by disabling multi-rate retry, which
850          * updates duration based on the multi-rate duration table.
851          *
852          * FIXME: Fix duration
853          */
854         if (ieee80211_has_morefrags(fc) ||
855             (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)) {
856                 rates[1].count = rates[2].count = rates[3].count = 0;
857                 rates[1].idx = rates[2].idx = rates[3].idx = 0;
858                 rates[0].count = ATH_TXMAXTRY;
859         }
860
861         /* Setup RTS/CTS */
862         ath_rc_rate_set_rtscts(sc, rate_table, tx_info);
863 }
864
865 static bool ath_rc_update_per(struct ath_softc *sc,
866                               const struct ath_rate_table *rate_table,
867                               struct ath_rate_priv *ath_rc_priv,
868                               struct ath_tx_info_priv *tx_info_priv,
869                               int tx_rate, int xretries, int retries,
870                               u32 now_msec)
871 {
872         bool state_change = false;
873         int count;
874         u8 last_per;
875         static u32 nretry_to_per_lookup[10] = {
876                 100 * 0 / 1,
877                 100 * 1 / 4,
878                 100 * 1 / 2,
879                 100 * 3 / 4,
880                 100 * 4 / 5,
881                 100 * 5 / 6,
882                 100 * 6 / 7,
883                 100 * 7 / 8,
884                 100 * 8 / 9,
885                 100 * 9 / 10
886         };
887
888         last_per = ath_rc_priv->state[tx_rate].per;
889
890         if (xretries) {
891                 if (xretries == 1) {
892                         ath_rc_priv->state[tx_rate].per += 30;
893                         if (ath_rc_priv->state[tx_rate].per > 100)
894                                 ath_rc_priv->state[tx_rate].per = 100;
895                 } else {
896                         /* xretries == 2 */
897                         count = ARRAY_SIZE(nretry_to_per_lookup);
898                         if (retries >= count)
899                                 retries = count - 1;
900
901                         /* new_PER = 7/8*old_PER + 1/8*(currentPER) */
902                         ath_rc_priv->state[tx_rate].per =
903                                 (u8)(last_per - (last_per >> 3) + (100 >> 3));
904                 }
905
906                 /* xretries == 1 or 2 */
907
908                 if (ath_rc_priv->probe_rate == tx_rate)
909                         ath_rc_priv->probe_rate = 0;
910
911         } else { /* xretries == 0 */
912                 count = ARRAY_SIZE(nretry_to_per_lookup);
913                 if (retries >= count)
914                         retries = count - 1;
915
916                 if (tx_info_priv->n_bad_frames) {
917                         /* new_PER = 7/8*old_PER + 1/8*(currentPER)
918                          * Assuming that n_frames is not 0.  The current PER
919                          * from the retries is 100 * retries / (retries+1),
920                          * since the first retries attempts failed, and the
921                          * next one worked.  For the one that worked,
922                          * n_bad_frames subframes out of n_frames wored,
923                          * so the PER for that part is
924                          * 100 * n_bad_frames / n_frames, and it contributes
925                          * 100 * n_bad_frames / (n_frames * (retries+1)) to
926                          * the above PER.  The expression below is a
927                          * simplified version of the sum of these two terms.
928                          */
929                         if (tx_info_priv->n_frames > 0) {
930                                 int n_frames, n_bad_frames;
931                                 u8 cur_per, new_per;
932
933                                 n_bad_frames = retries * tx_info_priv->n_frames +
934                                         tx_info_priv->n_bad_frames;
935                                 n_frames = tx_info_priv->n_frames * (retries + 1);
936                                 cur_per = (100 * n_bad_frames / n_frames) >> 3;
937                                 new_per = (u8)(last_per - (last_per >> 3) + cur_per);
938                                 ath_rc_priv->state[tx_rate].per = new_per;
939                         }
940                 } else {
941                         ath_rc_priv->state[tx_rate].per =
942                                 (u8)(last_per - (last_per >> 3) +
943                                      (nretry_to_per_lookup[retries] >> 3));
944                 }
945
946
947                 /*
948                  * If we got at most one retry then increase the max rate if
949                  * this was a probe.  Otherwise, ignore the probe.
950                  */
951                 if (ath_rc_priv->probe_rate && ath_rc_priv->probe_rate == tx_rate) {
952                         if (retries > 0 || 2 * tx_info_priv->n_bad_frames >
953                                 tx_info_priv->n_frames) {
954                                 /*
955                                  * Since we probed with just a single attempt,
956                                  * any retries means the probe failed.  Also,
957                                  * if the attempt worked, but more than half
958                                  * the subframes were bad then also consider
959                                  * the probe a failure.
960                                  */
961                                 ath_rc_priv->probe_rate = 0;
962                         } else {
963                                 u8 probe_rate = 0;
964
965                                 ath_rc_priv->rate_max_phy =
966                                         ath_rc_priv->probe_rate;
967                                 probe_rate = ath_rc_priv->probe_rate;
968
969                                 if (ath_rc_priv->state[probe_rate].per > 30)
970                                         ath_rc_priv->state[probe_rate].per = 20;
971
972                                 ath_rc_priv->probe_rate = 0;
973
974                                 /*
975                                  * Since this probe succeeded, we allow the next
976                                  * probe twice as soon.  This allows the maxRate
977                                  * to move up faster if the probes are
978                                  * succesful.
979                                  */
980                                 ath_rc_priv->probe_time =
981                                         now_msec - rate_table->probe_interval / 2;
982                         }
983                 }
984
985                 if (retries > 0) {
986                         /*
987                          * Don't update anything.  We don't know if
988                          * this was because of collisions or poor signal.
989                          */
990                         ath_rc_priv->hw_maxretry_pktcnt = 0;
991                 } else {
992                         /*
993                          * It worked with no retries. First ignore bogus (small)
994                          * rssi_ack values.
995                          */
996                         if (tx_rate == ath_rc_priv->rate_max_phy &&
997                             ath_rc_priv->hw_maxretry_pktcnt < 255) {
998                                 ath_rc_priv->hw_maxretry_pktcnt++;
999                         }
1000
1001                 }
1002         }
1003
1004         return state_change;
1005 }
1006
1007 /* Update PER, RSSI and whatever else that the code thinks it is doing.
1008    If you can make sense of all this, you really need to go out more. */
1009
1010 static void ath_rc_update_ht(struct ath_softc *sc,
1011                              struct ath_rate_priv *ath_rc_priv,
1012                              struct ath_tx_info_priv *tx_info_priv,
1013                              int tx_rate, int xretries, int retries)
1014 {
1015         u32 now_msec = jiffies_to_msecs(jiffies);
1016         int rate;
1017         u8 last_per;
1018         bool state_change = false;
1019         const struct ath_rate_table *rate_table = sc->cur_rate_table;
1020         int size = ath_rc_priv->rate_table_size;
1021
1022         if ((tx_rate < 0) || (tx_rate > rate_table->rate_cnt))
1023                 return;
1024
1025         last_per = ath_rc_priv->state[tx_rate].per;
1026
1027         /* Update PER first */
1028         state_change = ath_rc_update_per(sc, rate_table, ath_rc_priv,
1029                                          tx_info_priv, tx_rate, xretries,
1030                                          retries, now_msec);
1031
1032         /*
1033          * If this rate looks bad (high PER) then stop using it for
1034          * a while (except if we are probing).
1035          */
1036         if (ath_rc_priv->state[tx_rate].per >= 55 && tx_rate > 0 &&
1037             rate_table->info[tx_rate].ratekbps <=
1038             rate_table->info[ath_rc_priv->rate_max_phy].ratekbps) {
1039                 ath_rc_get_lower_rix(rate_table, ath_rc_priv,
1040                                      (u8)tx_rate, &ath_rc_priv->rate_max_phy);
1041
1042                 /* Don't probe for a little while. */
1043                 ath_rc_priv->probe_time = now_msec;
1044         }
1045
1046         /* Make sure the rates below this have lower PER */
1047         /* Monotonicity is kept only for rates below the current rate. */
1048         if (ath_rc_priv->state[tx_rate].per < last_per) {
1049                 for (rate = tx_rate - 1; rate >= 0; rate--) {
1050                         if (rate_table->info[rate].phy !=
1051                             rate_table->info[tx_rate].phy)
1052                                 break;
1053
1054                         if (ath_rc_priv->state[rate].per >
1055                             ath_rc_priv->state[rate+1].per) {
1056                                 ath_rc_priv->state[rate].per =
1057                                         ath_rc_priv->state[rate+1].per;
1058                         }
1059                 }
1060         }
1061
1062         /* Maintain monotonicity for rates above the current rate */
1063         for (rate = tx_rate; rate < size - 1; rate++) {
1064                 if (ath_rc_priv->state[rate+1].per <
1065                     ath_rc_priv->state[rate].per)
1066                         ath_rc_priv->state[rate+1].per =
1067                                 ath_rc_priv->state[rate].per;
1068         }
1069
1070         /* Every so often, we reduce the thresholds
1071          * and PER (different for CCK and OFDM). */
1072         if (now_msec - ath_rc_priv->per_down_time >=
1073             rate_table->rssi_reduce_interval) {
1074                 for (rate = 0; rate < size; rate++) {
1075                         ath_rc_priv->state[rate].per =
1076                                 7 * ath_rc_priv->state[rate].per / 8;
1077                 }
1078
1079                 ath_rc_priv->per_down_time = now_msec;
1080         }
1081
1082         ath_debug_stat_retries(sc, tx_rate, xretries, retries,
1083                                ath_rc_priv->state[tx_rate].per);
1084
1085 }
1086
1087 static int ath_rc_get_rateindex(const struct ath_rate_table *rate_table,
1088                                 struct ieee80211_tx_rate *rate)
1089 {
1090         int rix;
1091
1092         if ((rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) &&
1093             (rate->flags & IEEE80211_TX_RC_SHORT_GI))
1094                 rix = rate_table->info[rate->idx].ht_index;
1095         else if (rate->flags & IEEE80211_TX_RC_SHORT_GI)
1096                 rix = rate_table->info[rate->idx].sgi_index;
1097         else if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
1098                 rix = rate_table->info[rate->idx].cw40index;
1099         else
1100                 rix = rate_table->info[rate->idx].base_index;
1101
1102         return rix;
1103 }
1104
1105 static void ath_rc_tx_status(struct ath_softc *sc,
1106                              struct ath_rate_priv *ath_rc_priv,
1107                              struct ieee80211_tx_info *tx_info,
1108                              int final_ts_idx, int xretries, int long_retry)
1109 {
1110         struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
1111         const struct ath_rate_table *rate_table;
1112         struct ieee80211_tx_rate *rates = tx_info->status.rates;
1113         u8 flags;
1114         u32 i = 0, rix;
1115
1116         rate_table = sc->cur_rate_table;
1117
1118         /*
1119          * If the first rate is not the final index, there
1120          * are intermediate rate failures to be processed.
1121          */
1122         if (final_ts_idx != 0) {
1123                 /* Process intermediate rates that failed.*/
1124                 for (i = 0; i < final_ts_idx ; i++) {
1125                         if (rates[i].count != 0 && (rates[i].idx >= 0)) {
1126                                 flags = rates[i].flags;
1127
1128                                 /* If HT40 and we have switched mode from
1129                                  * 40 to 20 => don't update */
1130
1131                                 if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) &&
1132                                     !(ath_rc_priv->ht_cap & WLAN_RC_40_FLAG))
1133                                         return;
1134
1135                                 rix = ath_rc_get_rateindex(rate_table, &rates[i]);
1136                                 ath_rc_update_ht(sc, ath_rc_priv,
1137                                                 tx_info_priv, rix,
1138                                                 xretries ? 1 : 2,
1139                                                 rates[i].count);
1140                         }
1141                 }
1142         } else {
1143                 /*
1144                  * Handle the special case of MIMO PS burst, where the second
1145                  * aggregate is sent out with only one rate and one try.
1146                  * Treating it as an excessive retry penalizes the rate
1147                  * inordinately.
1148                  */
1149                 if (rates[0].count == 1 && xretries == 1)
1150                         xretries = 2;
1151         }
1152
1153         flags = rates[i].flags;
1154
1155         /* If HT40 and we have switched mode from 40 to 20 => don't update */
1156         if ((flags & IEEE80211_TX_RC_40_MHZ_WIDTH) &&
1157             !(ath_rc_priv->ht_cap & WLAN_RC_40_FLAG))
1158                 return;
1159
1160         rix = ath_rc_get_rateindex(rate_table, &rates[i]);
1161         ath_rc_update_ht(sc, ath_rc_priv, tx_info_priv, rix,
1162                          xretries, long_retry);
1163 }
1164
1165 static const
1166 struct ath_rate_table *ath_choose_rate_table(struct ath_softc *sc,
1167                                              enum ieee80211_band band,
1168                                              bool is_ht,
1169                                              bool is_cw_40)
1170 {
1171         int mode = 0;
1172
1173         switch(band) {
1174         case IEEE80211_BAND_2GHZ:
1175                 mode = ATH9K_MODE_11G;
1176                 if (is_ht)
1177                         mode = ATH9K_MODE_11NG_HT20;
1178                 if (is_cw_40)
1179                         mode = ATH9K_MODE_11NG_HT40PLUS;
1180                 break;
1181         case IEEE80211_BAND_5GHZ:
1182                 mode = ATH9K_MODE_11A;
1183                 if (is_ht)
1184                         mode = ATH9K_MODE_11NA_HT20;
1185                 if (is_cw_40)
1186                         mode = ATH9K_MODE_11NA_HT40PLUS;
1187                 break;
1188         default:
1189                 DPRINTF(sc, ATH_DBG_CONFIG, "Invalid band\n");
1190                 return NULL;
1191         }
1192
1193         BUG_ON(mode >= ATH9K_MODE_MAX);
1194
1195         DPRINTF(sc, ATH_DBG_CONFIG, "Choosing rate table for mode: %d\n", mode);
1196         return sc->hw_rate_table[mode];
1197 }
1198
1199 static void ath_rc_init(struct ath_softc *sc,
1200                         struct ath_rate_priv *ath_rc_priv,
1201                         struct ieee80211_supported_band *sband,
1202                         struct ieee80211_sta *sta,
1203                         const struct ath_rate_table *rate_table)
1204 {
1205         struct ath_rateset *rateset = &ath_rc_priv->neg_rates;
1206         u8 *ht_mcs = (u8 *)&ath_rc_priv->neg_ht_rates;
1207         u8 i, j, k, hi = 0, hthi = 0;
1208
1209         if (!rate_table) {
1210                 DPRINTF(sc, ATH_DBG_FATAL, "Rate table not initialized\n");
1211                 return;
1212         }
1213
1214         /* Initial rate table size. Will change depending
1215          * on the working rate set */
1216         ath_rc_priv->rate_table_size = RATE_TABLE_SIZE;
1217
1218         /* Initialize thresholds according to the global rate table */
1219         for (i = 0 ; i < ath_rc_priv->rate_table_size; i++) {
1220                 ath_rc_priv->state[i].per = 0;
1221         }
1222
1223         /* Determine the valid rates */
1224         ath_rc_init_valid_txmask(ath_rc_priv);
1225
1226         for (i = 0; i < WLAN_RC_PHY_MAX; i++) {
1227                 for (j = 0; j < MAX_TX_RATE_PHY; j++)
1228                         ath_rc_priv->valid_phy_rateidx[i][j] = 0;
1229                 ath_rc_priv->valid_phy_ratecnt[i] = 0;
1230         }
1231
1232         if (!rateset->rs_nrates) {
1233                 /* No working rate, just initialize valid rates */
1234                 hi = ath_rc_init_validrates(ath_rc_priv, rate_table,
1235                                             ath_rc_priv->ht_cap);
1236         } else {
1237                 /* Use intersection of working rates and valid rates */
1238                 hi = ath_rc_setvalid_rates(ath_rc_priv, rate_table,
1239                                            rateset, ath_rc_priv->ht_cap);
1240                 if (ath_rc_priv->ht_cap & WLAN_RC_HT_FLAG) {
1241                         hthi = ath_rc_setvalid_htrates(ath_rc_priv,
1242                                                        rate_table,
1243                                                        ht_mcs,
1244                                                        ath_rc_priv->ht_cap);
1245                 }
1246                 hi = A_MAX(hi, hthi);
1247         }
1248
1249         ath_rc_priv->rate_table_size = hi + 1;
1250         ath_rc_priv->rate_max_phy = 0;
1251         ASSERT(ath_rc_priv->rate_table_size <= RATE_TABLE_SIZE);
1252
1253         for (i = 0, k = 0; i < WLAN_RC_PHY_MAX; i++) {
1254                 for (j = 0; j < ath_rc_priv->valid_phy_ratecnt[i]; j++) {
1255                         ath_rc_priv->valid_rate_index[k++] =
1256                                 ath_rc_priv->valid_phy_rateidx[i][j];
1257                 }
1258
1259                 if (!ath_rc_valid_phyrate(i, rate_table->initial_ratemax, 1)
1260                     || !ath_rc_priv->valid_phy_ratecnt[i])
1261                         continue;
1262
1263                 ath_rc_priv->rate_max_phy = ath_rc_priv->valid_phy_rateidx[i][j-1];
1264         }
1265         ASSERT(ath_rc_priv->rate_table_size <= RATE_TABLE_SIZE);
1266         ASSERT(k <= RATE_TABLE_SIZE);
1267
1268         ath_rc_priv->max_valid_rate = k;
1269         ath_rc_sort_validrates(rate_table, ath_rc_priv);
1270         ath_rc_priv->rate_max_phy = ath_rc_priv->valid_rate_index[k-4];
1271         sc->cur_rate_table = rate_table;
1272
1273         DPRINTF(sc, ATH_DBG_CONFIG, "RC Initialized with capabilities: 0x%x\n",
1274                 ath_rc_priv->ht_cap);
1275 }
1276
1277 static u8 ath_rc_build_ht_caps(struct ath_softc *sc, struct ieee80211_sta *sta,
1278                                bool is_cw40, bool is_sgi40)
1279 {
1280         u8 caps = 0;
1281
1282         if (sta->ht_cap.ht_supported) {
1283                 caps = WLAN_RC_HT_FLAG;
1284                 if (sc->sc_ah->caps.tx_chainmask != 1 &&
1285                     ath9k_hw_getcapability(sc->sc_ah, ATH9K_CAP_DS, 0, NULL)) {
1286                         if (sta->ht_cap.mcs.rx_mask[1])
1287                                 caps |= WLAN_RC_DS_FLAG;
1288                 }
1289                 if (is_cw40)
1290                         caps |= WLAN_RC_40_FLAG;
1291                 if (is_sgi40)
1292                         caps |= WLAN_RC_SGI_FLAG;
1293         }
1294
1295         return caps;
1296 }
1297
1298 /***********************************/
1299 /* mac80211 Rate Control callbacks */
1300 /***********************************/
1301
1302 static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband,
1303                           struct ieee80211_sta *sta, void *priv_sta,
1304                           struct sk_buff *skb)
1305 {
1306         struct ath_softc *sc = priv;
1307         struct ath_rate_priv *ath_rc_priv = priv_sta;
1308         struct ath_tx_info_priv *tx_info_priv = NULL;
1309         struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
1310         struct ieee80211_hdr *hdr;
1311         int final_ts_idx, tx_status = 0, is_underrun = 0;
1312         __le16 fc;
1313
1314         hdr = (struct ieee80211_hdr *)skb->data;
1315         fc = hdr->frame_control;
1316         tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
1317         final_ts_idx = tx_info_priv->tx.ts_rateindex;
1318
1319         if (!priv_sta || !ieee80211_is_data(fc) ||
1320             !tx_info_priv->update_rc)
1321                 goto exit;
1322
1323         if (tx_info_priv->tx.ts_status & ATH9K_TXERR_FILT)
1324                 goto exit;
1325
1326         /*
1327          * If underrun error is seen assume it as an excessive retry only
1328          * if prefetch trigger level have reached the max (0x3f for 5416)
1329          * Adjust the long retry as if the frame was tried hw->max_rate_tries
1330          * times. This affects how ratectrl updates PER for the failed rate.
1331          */
1332         if (tx_info_priv->tx.ts_flags &
1333             (ATH9K_TX_DATA_UNDERRUN | ATH9K_TX_DELIM_UNDERRUN) &&
1334             ((sc->sc_ah->tx_trig_level) >= ath_rc_priv->tx_triglevel_max)) {
1335                 tx_status = 1;
1336                 is_underrun = 1;
1337         }
1338
1339         if ((tx_info_priv->tx.ts_status & ATH9K_TXERR_XRETRY) ||
1340             (tx_info_priv->tx.ts_status & ATH9K_TXERR_FIFO))
1341                 tx_status = 1;
1342
1343         ath_rc_tx_status(sc, ath_rc_priv, tx_info, final_ts_idx, tx_status,
1344                          (is_underrun) ? sc->hw->max_rate_tries :
1345                          tx_info_priv->tx.ts_longretry);
1346
1347         /* Check if aggregation has to be enabled for this tid */
1348         if (conf_is_ht(&sc->hw->conf) &&
1349             !(skb->protocol == cpu_to_be16(ETH_P_PAE))) {
1350                 if (ieee80211_is_data_qos(fc)) {
1351                         u8 *qc, tid;
1352                         struct ath_node *an;
1353
1354                         qc = ieee80211_get_qos_ctl(hdr);
1355                         tid = qc[0] & 0xf;
1356                         an = (struct ath_node *)sta->drv_priv;
1357
1358                         if(ath_tx_aggr_check(sc, an, tid))
1359                                 ieee80211_start_tx_ba_session(sc->hw, hdr->addr1, tid);
1360                 }
1361         }
1362
1363         ath_debug_stat_rc(sc, skb);
1364 exit:
1365         kfree(tx_info_priv);
1366 }
1367
1368 static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
1369                           struct ieee80211_sta *sta, void *priv_sta)
1370 {
1371         struct ath_softc *sc = priv;
1372         struct ath_rate_priv *ath_rc_priv = priv_sta;
1373         const struct ath_rate_table *rate_table = NULL;
1374         bool is_cw40, is_sgi40;
1375         int i, j = 0;
1376
1377         for (i = 0; i < sband->n_bitrates; i++) {
1378                 if (sta->supp_rates[sband->band] & BIT(i)) {
1379                         ath_rc_priv->neg_rates.rs_rates[j]
1380                                 = (sband->bitrates[i].bitrate * 2) / 10;
1381                         j++;
1382                 }
1383         }
1384         ath_rc_priv->neg_rates.rs_nrates = j;
1385
1386         if (sta->ht_cap.ht_supported) {
1387                 for (i = 0, j = 0; i < 77; i++) {
1388                         if (sta->ht_cap.mcs.rx_mask[i/8] & (1<<(i%8)))
1389                                 ath_rc_priv->neg_ht_rates.rs_rates[j++] = i;
1390                         if (j == ATH_RATE_MAX)
1391                                 break;
1392                 }
1393                 ath_rc_priv->neg_ht_rates.rs_nrates = j;
1394         }
1395
1396         is_cw40 = sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40;
1397         is_sgi40 = sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40;
1398
1399         /* Choose rate table first */
1400
1401         if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) ||
1402             (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT) ||
1403             (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)) {
1404                 rate_table = ath_choose_rate_table(sc, sband->band,
1405                                                    sta->ht_cap.ht_supported,
1406                                                    is_cw40);
1407         } else if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) {
1408                 /* cur_rate_table would be set on init through config() */
1409                 rate_table = sc->cur_rate_table;
1410         }
1411
1412         ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, sta, is_cw40, is_sgi40);
1413         ath_rc_init(sc, priv_sta, sband, sta, rate_table);
1414 }
1415
1416 static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
1417                             struct ieee80211_sta *sta, void *priv_sta,
1418                             u32 changed)
1419 {
1420         struct ath_softc *sc = priv;
1421         struct ath_rate_priv *ath_rc_priv = priv_sta;
1422         const struct ath_rate_table *rate_table = NULL;
1423         bool oper_cw40 = false, oper_sgi40;
1424         bool local_cw40 = (ath_rc_priv->ht_cap & WLAN_RC_40_FLAG) ?
1425                 true : false;
1426         bool local_sgi40 = (ath_rc_priv->ht_cap & WLAN_RC_SGI_FLAG) ?
1427                 true : false;
1428
1429         /* FIXME: Handle AP mode later when we support CWM */
1430
1431         if (changed & IEEE80211_RC_HT_CHANGED) {
1432                 if (sc->sc_ah->opmode != NL80211_IFTYPE_STATION)
1433                         return;
1434
1435                 if (sc->hw->conf.channel_type == NL80211_CHAN_HT40MINUS ||
1436                     sc->hw->conf.channel_type == NL80211_CHAN_HT40PLUS)
1437                         oper_cw40 = true;
1438
1439                 oper_sgi40 = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ?
1440                         true : false;
1441
1442                 if ((local_cw40 != oper_cw40) || (local_sgi40 != oper_sgi40)) {
1443                         rate_table = ath_choose_rate_table(sc, sband->band,
1444                                                    sta->ht_cap.ht_supported,
1445                                                    oper_cw40);
1446                         ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, sta,
1447                                                    oper_cw40, oper_sgi40);
1448                         ath_rc_init(sc, priv_sta, sband, sta, rate_table);
1449
1450                         DPRINTF(sc, ATH_DBG_CONFIG,
1451                                 "Operating HT Bandwidth changed to: %d\n",
1452                                 sc->hw->conf.channel_type);
1453                 }
1454         }
1455 }
1456
1457 static void *ath_rate_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
1458 {
1459         struct ath_wiphy *aphy = hw->priv;
1460         return aphy->sc;
1461 }
1462
1463 static void ath_rate_free(void *priv)
1464 {
1465         return;
1466 }
1467
1468 static void *ath_rate_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp)
1469 {
1470         struct ath_softc *sc = priv;
1471         struct ath_rate_priv *rate_priv;
1472
1473         rate_priv = kzalloc(sizeof(struct ath_rate_priv), gfp);
1474         if (!rate_priv) {
1475                 DPRINTF(sc, ATH_DBG_FATAL,
1476                         "Unable to allocate private rc structure\n");
1477                 return NULL;
1478         }
1479
1480         rate_priv->tx_triglevel_max = sc->sc_ah->caps.tx_triglevel_max;
1481
1482         return rate_priv;
1483 }
1484
1485 static void ath_rate_free_sta(void *priv, struct ieee80211_sta *sta,
1486                               void *priv_sta)
1487 {
1488         struct ath_rate_priv *rate_priv = priv_sta;
1489         kfree(rate_priv);
1490 }
1491
1492 static struct rate_control_ops ath_rate_ops = {
1493         .module = NULL,
1494         .name = "ath9k_rate_control",
1495         .tx_status = ath_tx_status,
1496         .get_rate = ath_get_rate,
1497         .rate_init = ath_rate_init,
1498         .rate_update = ath_rate_update,
1499         .alloc = ath_rate_alloc,
1500         .free = ath_rate_free,
1501         .alloc_sta = ath_rate_alloc_sta,
1502         .free_sta = ath_rate_free_sta,
1503 };
1504
1505 void ath_rate_attach(struct ath_softc *sc)
1506 {
1507         sc->hw_rate_table[ATH9K_MODE_11A] =
1508                 &ar5416_11a_ratetable;
1509         sc->hw_rate_table[ATH9K_MODE_11G] =
1510                 &ar5416_11g_ratetable;
1511         sc->hw_rate_table[ATH9K_MODE_11NA_HT20] =
1512                 &ar5416_11na_ratetable;
1513         sc->hw_rate_table[ATH9K_MODE_11NG_HT20] =
1514                 &ar5416_11ng_ratetable;
1515         sc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS] =
1516                 &ar5416_11na_ratetable;
1517         sc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS] =
1518                 &ar5416_11na_ratetable;
1519         sc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS] =
1520                 &ar5416_11ng_ratetable;
1521         sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS] =
1522                 &ar5416_11ng_ratetable;
1523 }
1524
1525 int ath_rate_control_register(void)
1526 {
1527         return ieee80211_rate_control_register(&ath_rate_ops);
1528 }
1529
1530 void ath_rate_control_unregister(void)
1531 {
1532         ieee80211_rate_control_unregister(&ath_rate_ops);
1533 }