drivers/net/wireless/ath/ath9k/ar9002_hw.c

   1 /*
   2  * Copyright (c) 2008-2011 Atheros Communications Inc.
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  */
  16
  17 #include <linux/moduleparam.h>
  18 #include "hw.h"
  19 #include "ar5008_initvals.h"
  20 #include "ar9001_initvals.h"
  21 #include "ar9002_initvals.h"
  22 #include "ar9002_phy.h"
  23
  24 /* General hardware code for the A5008/AR9001/AR9002 hadware families */
  25
  26 static void ar9002_hw_init_mode_regs(struct ath_hw *ah)
  27 {
  28         if (AR_SREV_9271(ah)) {
  29                 INIT_INI_ARRAY(&ah->iniModes, ar9271Modes_9271);
  30                 INIT_INI_ARRAY(&ah->iniCommon, ar9271Common_9271);
  31                 INIT_INI_ARRAY(&ah->iniModes_9271_ANI_reg, ar9271Modes_9271_ANI_reg);
  32                 return;
  33         }
  34
  35         if (ah->config.pcie_clock_req)
  36                 INIT_INI_ARRAY(&ah->iniPcieSerdes,
  37                            ar9280PciePhy_clkreq_off_L1_9280);
  38         else
  39                 INIT_INI_ARRAY(&ah->iniPcieSerdes,
  40                            ar9280PciePhy_clkreq_always_on_L1_9280);
  41 #ifdef CONFIG_PM_SLEEP
  42                 INIT_INI_ARRAY(&ah->iniPcieSerdesWow,
  43                                ar9280PciePhy_awow);
  44 #endif
  45
  46         if (AR_SREV_9287_11_OR_LATER(ah)) {
  47                 INIT_INI_ARRAY(&ah->iniModes, ar9287Modes_9287_1_1);
  48                 INIT_INI_ARRAY(&ah->iniCommon, ar9287Common_9287_1_1);
  49         } else if (AR_SREV_9285_12_OR_LATER(ah)) {
  50                 INIT_INI_ARRAY(&ah->iniModes, ar9285Modes_9285_1_2);
  51                 INIT_INI_ARRAY(&ah->iniCommon, ar9285Common_9285_1_2);
  52         } else if (AR_SREV_9280_20_OR_LATER(ah)) {
  53                 INIT_INI_ARRAY(&ah->iniModes, ar9280Modes_9280_2);
  54                 INIT_INI_ARRAY(&ah->iniCommon, ar9280Common_9280_2);
  55
  56                 INIT_INI_ARRAY(&ah->iniModesFastClock,
  57                                ar9280Modes_fast_clock_9280_2);
  58         } else if (AR_SREV_9160_10_OR_LATER(ah)) {
  59                 INIT_INI_ARRAY(&ah->iniModes, ar5416Modes_9160);
  60                 INIT_INI_ARRAY(&ah->iniCommon, ar5416Common_9160);
  61                 if (AR_SREV_9160_11(ah)) {
  62                         INIT_INI_ARRAY(&ah->iniAddac,
  63                                        ar5416Addac_9160_1_1);
  64                 } else {
  65                         INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac_9160);
  66                 }
  67         } else if (AR_SREV_9100_OR_LATER(ah)) {
  68                 INIT_INI_ARRAY(&ah->iniModes, ar5416Modes_9100);
  69                 INIT_INI_ARRAY(&ah->iniCommon, ar5416Common_9100);
  70                 INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6_9100);
  71                 INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac_9100);
  72         } else {
  73                 INIT_INI_ARRAY(&ah->iniModes, ar5416Modes);
  74                 INIT_INI_ARRAY(&ah->iniCommon, ar5416Common);
  75                 INIT_INI_ARRAY(&ah->iniBank6TPC, ar5416Bank6TPC);
  76                 INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac);
  77         }
  78
  79         if (!AR_SREV_9280_20_OR_LATER(ah)) {
  80                 /* Common for AR5416, AR913x, AR9160 */
  81                 INIT_INI_ARRAY(&ah->iniBB_RfGain, ar5416BB_RfGain);
  82
  83                 INIT_INI_ARRAY(&ah->iniBank0, ar5416Bank0);
  84                 INIT_INI_ARRAY(&ah->iniBank1, ar5416Bank1);
  85                 INIT_INI_ARRAY(&ah->iniBank2, ar5416Bank2);
  86                 INIT_INI_ARRAY(&ah->iniBank3, ar5416Bank3);
  87                 INIT_INI_ARRAY(&ah->iniBank7, ar5416Bank7);
  88
  89                 /* Common for AR5416, AR9160 */
  90                 if (!AR_SREV_9100(ah))
  91                         INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6);
  92
  93                 /* Common for AR913x, AR9160 */
  94                 if (!AR_SREV_5416(ah))
  95                         INIT_INI_ARRAY(&ah->iniBank6TPC,
  96                                       ar5416Bank6TPC_9100);
  97         }
  98
  99         /* iniAddac needs to be modified for these chips */
 100         if (AR_SREV_9160(ah) || !AR_SREV_5416_22_OR_LATER(ah)) {
 101                 struct ar5416IniArray *addac = &ah->iniAddac;
 102                 u32 size = sizeof(u32) * addac->ia_rows * addac->ia_columns;
 103                 u32 *data;
 104
 105                 data = kmalloc(size, GFP_KERNEL);
 106                 if (!data)
 107                         return;
 108
 109                 memcpy(data, addac->ia_array, size);
 110                 addac->ia_array = data;
 111
 112                 if (!AR_SREV_5416_22_OR_LATER(ah)) {
 113                         /* override CLKDRV value */
 114                         INI_RA(addac, 31,1) = 0;
 115                 }
 116         }
 117         if (AR_SREV_9287_11_OR_LATER(ah)) {
 118                 INIT_INI_ARRAY(&ah->iniCckfirNormal,
 119                        ar9287Common_normal_cck_fir_coeff_9287_1_1);
 120                 INIT_INI_ARRAY(&ah->iniCckfirJapan2484,
 121                        ar9287Common_japan_2484_cck_fir_coeff_9287_1_1);
 122         }
 123 }
 124
 125 static void ar9280_20_hw_init_rxgain_ini(struct ath_hw *ah)
 126 {
 127         u32 rxgain_type;
 128
 129         if (ah->eep_ops->get_eeprom(ah, EEP_MINOR_REV) >=
 130             AR5416_EEP_MINOR_VER_17) {
 131                 rxgain_type = ah->eep_ops->get_eeprom(ah, EEP_RXGAIN_TYPE);
 132
 133                 if (rxgain_type == AR5416_EEP_RXGAIN_13DB_BACKOFF)
 134                         INIT_INI_ARRAY(&ah->iniModesRxGain,
 135                                        ar9280Modes_backoff_13db_rxgain_9280_2);
 136                 else if (rxgain_type == AR5416_EEP_RXGAIN_23DB_BACKOFF)
 137                         INIT_INI_ARRAY(&ah->iniModesRxGain,
 138                                        ar9280Modes_backoff_23db_rxgain_9280_2);
 139                 else
 140                         INIT_INI_ARRAY(&ah->iniModesRxGain,
 141                                        ar9280Modes_original_rxgain_9280_2);
 142         } else {
 143                 INIT_INI_ARRAY(&ah->iniModesRxGain,
 144                                ar9280Modes_original_rxgain_9280_2);
 145         }
 146 }
 147
 148 static void ar9280_20_hw_init_txgain_ini(struct ath_hw *ah, u32 txgain_type)
 149 {
 150         if (ah->eep_ops->get_eeprom(ah, EEP_MINOR_REV) >=
 151             AR5416_EEP_MINOR_VER_19) {
 152                 if (txgain_type == AR5416_EEP_TXGAIN_HIGH_POWER)
 153                         INIT_INI_ARRAY(&ah->iniModesTxGain,
 154                                        ar9280Modes_high_power_tx_gain_9280_2);
 155                 else
 156                         INIT_INI_ARRAY(&ah->iniModesTxGain,
 157                                        ar9280Modes_original_tx_gain_9280_2);
 158         } else {
 159                 INIT_INI_ARRAY(&ah->iniModesTxGain,
 160                                ar9280Modes_original_tx_gain_9280_2);
 161         }
 162 }
 163
 164 static void ar9271_hw_init_txgain_ini(struct ath_hw *ah, u32 txgain_type)
 165 {
 166         if (txgain_type == AR5416_EEP_TXGAIN_HIGH_POWER)
 167                 INIT_INI_ARRAY(&ah->iniModesTxGain,
 168                                ar9271Modes_high_power_tx_gain_9271);
 169         else
 170                 INIT_INI_ARRAY(&ah->iniModesTxGain,
 171                                ar9271Modes_normal_power_tx_gain_9271);
 172 }
 173
 174 static void ar9002_hw_init_mode_gain_regs(struct ath_hw *ah)
 175 {
 176         u32 txgain_type = ah->eep_ops->get_eeprom(ah, EEP_TXGAIN_TYPE);
 177
 178         if (AR_SREV_9287_11_OR_LATER(ah))
 179                 INIT_INI_ARRAY(&ah->iniModesRxGain,
 180                                ar9287Modes_rx_gain_9287_1_1);
 181         else if (AR_SREV_9280_20(ah))
 182                 ar9280_20_hw_init_rxgain_ini(ah);
 183
 184         if (AR_SREV_9271(ah)) {
 185                 ar9271_hw_init_txgain_ini(ah, txgain_type);
 186         } else if (AR_SREV_9287_11_OR_LATER(ah)) {
 187                 INIT_INI_ARRAY(&ah->iniModesTxGain,
 188                                ar9287Modes_tx_gain_9287_1_1);
 189         } else if (AR_SREV_9280_20(ah)) {
 190                 ar9280_20_hw_init_txgain_ini(ah, txgain_type);
 191         } else if (AR_SREV_9285_12_OR_LATER(ah)) {
 192                 /* txgain table */
 193                 if (txgain_type == AR5416_EEP_TXGAIN_HIGH_POWER) {
 194                         if (AR_SREV_9285E_20(ah)) {
 195                                 INIT_INI_ARRAY(&ah->iniModesTxGain,
 196                                                ar9285Modes_XE2_0_high_power);
 197                         } else {
 198                                 INIT_INI_ARRAY(&ah->iniModesTxGain,
 199                                         ar9285Modes_high_power_tx_gain_9285_1_2);
 200                         }
 201                 } else {
 202                         if (AR_SREV_9285E_20(ah)) {
 203                                 INIT_INI_ARRAY(&ah->iniModesTxGain,
 204                                                ar9285Modes_XE2_0_normal_power);
 205                         } else {
 206                                 INIT_INI_ARRAY(&ah->iniModesTxGain,
 207                                         ar9285Modes_original_tx_gain_9285_1_2);
 208                         }
 209                 }
 210         }
 211 }
 212
 213 /*
 214  * Helper for ASPM support.
 215  *
 216  * Disable PLL when in L0s as well as receiver clock when in L1.
 217  * This power saving option must be enabled through the SerDes.
 218  *
 219  * Programming the SerDes must go through the same 288 bit serial shift
 220  * register as the other analog registers.  Hence the 9 writes.
 221  */
 222 static void ar9002_hw_configpcipowersave(struct ath_hw *ah,
 223                                          bool power_off)
 224 {
 225         u8 i;
 226         u32 val;
 227
 228         /* Nothing to do on restore for 11N */
 229         if (!power_off /* !restore */) {
 230                 if (AR_SREV_9280_20_OR_LATER(ah)) {
 231                         /*
 232                          * AR9280 2.0 or later chips use SerDes values from the
 233                          * initvals.h initialized depending on chipset during
 234                          * __ath9k_hw_init()
 235                          */
 236                         for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) {
 237                                 REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0),
 238                                           INI_RA(&ah->iniPcieSerdes, i, 1));
 239                         }
 240                 } else {
 241                         ENABLE_REGWRITE_BUFFER(ah);
 242
 243                         REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
 244                         REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
 245
 246                         /* RX shut off when elecidle is asserted */
 247                         REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
 248                         REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
 249                         REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
 250
 251                         /*
 252                          * Ignore ah->ah_config.pcie_clock_req setting for
 253                          * pre-AR9280 11n
 254                          */
 255                         REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
 256
 257                         REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
 258                         REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
 259                         REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
 260
 261                         /* Load the new settings */
 262                         REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
 263
 264                         REGWRITE_BUFFER_FLUSH(ah);
 265                 }
 266
 267                 udelay(1000);
 268         }
 269
 270         if (power_off) {
 271                 /* clear bit 19 to disable L1 */
 272                 REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
 273
 274                 val = REG_READ(ah, AR_WA);
 275
 276                 /*
 277                  * Set PCIe workaround bits
 278                  * In AR9280 and AR9285, bit 14 in WA register (disable L1)
 279                  * should only  be set when device enters D3 and be
 280                  * cleared when device comes back to D0.
 281                  */
 282                 if (ah->config.pcie_waen) {
 283                         if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE)
 284                                 val |= AR_WA_D3_L1_DISABLE;
 285                 } else {
 286                         if (((AR_SREV_9285(ah) ||
 287                               AR_SREV_9271(ah) ||
 288                               AR_SREV_9287(ah)) &&
 289                              (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)) ||
 290                             (AR_SREV_9280(ah) &&
 291                              (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE))) {
 292                                 val |= AR_WA_D3_L1_DISABLE;
 293                         }
 294                 }
 295
 296                 if (AR_SREV_9280(ah) || AR_SREV_9285(ah) || AR_SREV_9287(ah)) {
 297                         /*
 298                          * Disable bit 6 and 7 before entering D3 to
 299                          * prevent system hang.
 300                          */
 301                         val &= ~(AR_WA_BIT6 | AR_WA_BIT7);
 302                 }
 303
 304                 if (AR_SREV_9280(ah))
 305                         val |= AR_WA_BIT22;
 306
 307                 if (AR_SREV_9285E_20(ah))
 308                         val |= AR_WA_BIT23;
 309
 310                 REG_WRITE(ah, AR_WA, val);
 311         } else {
 312                 if (ah->config.pcie_waen) {
 313                         val = ah->config.pcie_waen;
 314                         if (!power_off)
 315                                 val &= (~AR_WA_D3_L1_DISABLE);
 316                 } else {
 317                         if (AR_SREV_9285(ah) ||
 318                             AR_SREV_9271(ah) ||
 319                             AR_SREV_9287(ah)) {
 320                                 val = AR9285_WA_DEFAULT;
 321                                 if (!power_off)
 322                                         val &= (~AR_WA_D3_L1_DISABLE);
 323                         }
 324                         else if (AR_SREV_9280(ah)) {
 325                                 /*
 326                                  * For AR9280 chips, bit 22 of 0x4004
 327                                  * needs to be set.
 328                                  */
 329                                 val = AR9280_WA_DEFAULT;
 330                                 if (!power_off)
 331                                         val &= (~AR_WA_D3_L1_DISABLE);
 332                         } else {
 333                                 val = AR_WA_DEFAULT;
 334                         }
 335                 }
 336
 337                 /* WAR for ASPM system hang */
 338                 if (AR_SREV_9285(ah) || AR_SREV_9287(ah))
 339                         val |= (AR_WA_BIT6 | AR_WA_BIT7);
 340
 341                 if (AR_SREV_9285E_20(ah))
 342                         val |= AR_WA_BIT23;
 343
 344                 REG_WRITE(ah, AR_WA, val);
 345
 346                 /* set bit 19 to allow forcing of pcie core into L1 state */
 347                 REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
 348         }
 349 }
 350
 351 static int ar9002_hw_get_radiorev(struct ath_hw *ah)
 352 {
 353         u32 val;
 354         int i;
 355
 356         ENABLE_REGWRITE_BUFFER(ah);
 357
 358         REG_WRITE(ah, AR_PHY(0x36), 0x00007058);
 359         for (i = 0; i < 8; i++)
 360                 REG_WRITE(ah, AR_PHY(0x20), 0x00010000);
 361
 362         REGWRITE_BUFFER_FLUSH(ah);
 363
 364         val = (REG_READ(ah, AR_PHY(256)) >> 24) & 0xff;
 365         val = ((val & 0xf0) >> 4) | ((val & 0x0f) << 4);
 366
 367         return ath9k_hw_reverse_bits(val, 8);
 368 }
 369
 370 int ar9002_hw_rf_claim(struct ath_hw *ah)
 371 {
 372         u32 val;
 373
 374         REG_WRITE(ah, AR_PHY(0), 0x00000007);
 375
 376         val = ar9002_hw_get_radiorev(ah);
 377         switch (val & AR_RADIO_SREV_MAJOR) {
 378         case 0:
 379                 val = AR_RAD5133_SREV_MAJOR;
 380                 break;
 381         case AR_RAD5133_SREV_MAJOR:
 382         case AR_RAD5122_SREV_MAJOR:
 383         case AR_RAD2133_SREV_MAJOR:
 384         case AR_RAD2122_SREV_MAJOR:
 385                 break;
 386         default:
 387                 ath_err(ath9k_hw_common(ah),
 388                         "Radio Chip Rev 0x%02X not supported\n",
 389                         val & AR_RADIO_SREV_MAJOR);
 390                 return -EOPNOTSUPP;
 391         }
 392
 393         ah->hw_version.analog5GhzRev = val;
 394
 395         return 0;
 396 }
 397
 398 void ar9002_hw_enable_async_fifo(struct ath_hw *ah)
 399 {
 400         if (AR_SREV_9287_13_OR_LATER(ah)) {
 401                 REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
 402                                 AR_MAC_PCU_ASYNC_FIFO_REG3_DATAPATH_SEL);
 403                 REG_SET_BIT(ah, AR_PHY_MODE, AR_PHY_MODE_ASYNCFIFO);
 404                 REG_CLR_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
 405                                 AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET);
 406                 REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
 407                                 AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET);
 408         }
 409 }
 410
 411 /* Sets up the AR5008/AR9001/AR9002 hardware familiy callbacks */
 412 void ar9002_hw_attach_ops(struct ath_hw *ah)
 413 {
 414         struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
 415         struct ath_hw_ops *ops = ath9k_hw_ops(ah);
 416
 417         priv_ops->init_mode_regs = ar9002_hw_init_mode_regs;
 418         priv_ops->init_mode_gain_regs = ar9002_hw_init_mode_gain_regs;
 419
 420         ops->config_pci_powersave = ar9002_hw_configpcipowersave;
 421
 422         ar5008_hw_attach_phy_ops(ah);
 423         if (AR_SREV_9280_20_OR_LATER(ah))
 424                 ar9002_hw_attach_phy_ops(ah);
 425
 426         ar9002_hw_attach_calib_ops(ah);
 427         ar9002_hw_attach_mac_ops(ah);
 428 }
 429
 430 void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan)
 431 {
 432         u32 modesIndex;
 433         int i;
 434
 435         switch (chan->chanmode) {
 436         case CHANNEL_A:
 437         case CHANNEL_A_HT20:
 438                 modesIndex = 1;
 439                 break;
 440         case CHANNEL_A_HT40PLUS:
 441         case CHANNEL_A_HT40MINUS:
 442                 modesIndex = 2;
 443                 break;
 444         case CHANNEL_G:
 445         case CHANNEL_G_HT20:
 446         case CHANNEL_B:
 447                 modesIndex = 4;
 448                 break;
 449         case CHANNEL_G_HT40PLUS:
 450         case CHANNEL_G_HT40MINUS:
 451                 modesIndex = 3;
 452                 break;
 453
 454         default:
 455                 return;
 456         }
 457
 458         ENABLE_REGWRITE_BUFFER(ah);
 459
 460         for (i = 0; i < ah->iniModes_9271_ANI_reg.ia_rows; i++) {
 461                 u32 reg = INI_RA(&ah->iniModes_9271_ANI_reg, i, 0);
 462                 u32 val = INI_RA(&ah->iniModes_9271_ANI_reg, i, modesIndex);
 463                 u32 val_orig;
 464
 465                 if (reg == AR_PHY_CCK_DETECT) {
 466                         val_orig = REG_READ(ah, reg);
 467                         val &= AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK;
 468                         val_orig &= ~AR_PHY_CCK_DETECT_WEAK_SIG_THR_CCK;
 469
 470                         REG_WRITE(ah, reg, val|val_orig);
 471                 } else
 472                         REG_WRITE(ah, reg, val);
 473         }
 474
 475         REGWRITE_BUFFER_FLUSH(ah);
 476 }