2 * cycx_drv.c Cyclom 2X Support Module.
4 * This module is a library of common hardware specific
5 * functions used by the Cyclades Cyclom 2X sync card.
7 * Author: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
9 * Copyright: (c) 1998-2003 Arnaldo Carvalho de Melo
11 * Based on sdladrv.c by Gene Kozin <genek@compuserve.com>
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License
15 * as published by the Free Software Foundation; either version
16 * 2 of the License, or (at your option) any later version.
17 * ============================================================================
18 * 1999/11/11 acme set_current_state(TASK_INTERRUPTIBLE), code
20 * 1999/11/08 acme init_cyc2x deleted, doing nothing
21 * 1999/11/06 acme back to read[bw], write[bw] and memcpy_to and
22 * fromio to use dpmbase ioremaped
23 * 1999/10/26 acme use isa_read[bw], isa_write[bw] & isa_memcpy_to
25 * 1999/10/23 acme cleanup to only supports cyclom2x: all the other
26 * boards are no longer manufactured by cyclades,
27 * if someone wants to support them... be my guest!
28 * 1999/05/28 acme cycx_intack & cycx_intde gone for good
29 * 1999/05/18 acme lots of unlogged work, submitting to Linus...
30 * 1999/01/03 acme more judicious use of data types
31 * 1999/01/03 acme judicious use of data types :>
32 * cycx_inten trying to reset pending interrupts
33 * from cyclom 2x - I think this isn't the way to
35 * 1999/01/02 acme cycx_intack ok, I think there's nothing to do
36 * to ack an int in cycx_drv.c, only handle it in
37 * cyx_isr (or in the other protocols: cyp_isr,
38 * cyf_isr, when they get implemented.
39 * Dec 31, 1998 acme cycx_data_boot & cycx_code_boot fixed, crossing
40 * fingers to see x25_configure in cycx_x25.c
42 * Dec 26, 1998 acme load implementation fixed, seems to work! :)
43 * cycx_2x_dpmbase_options with all the possible
45 * cycx_intr implemented (test this!)
46 * general code cleanup
47 * Dec 8, 1998 Ivan Passos Cyclom-2X firmware load implementation.
48 * Aug 8, 1998 acme Initial version.
51 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
53 #include <linux/init.h> /* __init */
54 #include <linux/module.h>
55 #include <linux/kernel.h> /* printk(), and other useful stuff */
56 #include <linux/stddef.h> /* offsetof(), etc. */
57 #include <linux/errno.h> /* return codes */
58 #include <linux/cycx_drv.h> /* API definitions */
59 #include <linux/cycx_cfm.h> /* CYCX firmware module definitions */
60 #include <linux/delay.h> /* udelay, msleep_interruptible */
61 #include <asm/io.h> /* read[wl], write[wl], ioremap, iounmap */
66 MODULE_AUTHOR("Arnaldo Carvalho de Melo");
67 MODULE_DESCRIPTION("Cyclom 2x Sync Card Driver");
68 MODULE_LICENSE("GPL");
70 /* Hardware-specific functions */
71 static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len);
72 static void cycx_bootcfg(struct cycx_hw *hw);
74 static int reset_cyc2x(void __iomem *addr);
75 static int detect_cyc2x(void __iomem *addr);
77 /* Miscellaneous functions */
78 static int get_option_index(const long *optlist, long optval);
79 static u16 checksum(u8 *buf, u32 len);
81 #define wait_cyc(addr) cycx_exec(addr + CMD_OFFSET)
86 static const char fullname[] = "Cyclom 2X Support Module";
87 static const char copyright[] =
88 "(c) 1998-2003 Arnaldo Carvalho de Melo <acme@conectiva.com.br>";
90 /* Hardware configuration options.
91 * These are arrays of configuration options used by verification routines.
92 * The first element of each array is its size (i.e. number of options).
94 static const long cyc2x_dpmbase_options[] = {
96 0xA0000, 0xA4000, 0xA8000, 0xAC000, 0xB0000, 0xB4000, 0xB8000,
97 0xBC000, 0xC0000, 0xC4000, 0xC8000, 0xCC000, 0xD0000, 0xD4000,
98 0xD8000, 0xDC000, 0xE0000, 0xE4000, 0xE8000, 0xEC000
101 static const long cycx_2x_irq_options[] = { 7, 3, 5, 9, 10, 11, 12, 15 };
103 /* Kernel Loadable Module Entry Points */
104 /* Module 'insert' entry point.
105 * o print announcement
106 * o initialize static data
110 * Context: process */
112 static int __init cycx_drv_init(void)
114 pr_info("%s v%u.%u %s\n",
115 fullname, MOD_VERSION, MOD_RELEASE, copyright);
120 /* Module 'remove' entry point.
121 * o release all remaining system resources */
122 static void cycx_drv_cleanup(void)
128 * o detect adapter type
129 * o verify hardware configuration options
130 * o check for hardware conflicts
131 * o set up adapter shared memory
132 * o test adapter memory
136 EXPORT_SYMBOL(cycx_setup);
137 int cycx_setup(struct cycx_hw *hw, void *cfm, u32 len, unsigned long dpmbase)
141 /* Verify IRQ configuration options */
142 if (!get_option_index(cycx_2x_irq_options, hw->irq)) {
143 pr_err("IRQ %d is invalid!\n", hw->irq);
147 /* Setup adapter dual-port memory window and test memory */
149 pr_err("you must specify the dpm address!\n");
151 } else if (!get_option_index(cyc2x_dpmbase_options, dpmbase)) {
152 pr_err("memory address 0x%lX is invalid!\n", dpmbase);
156 hw->dpmbase = ioremap(dpmbase, CYCX_WINDOWSIZE);
157 hw->dpmsize = CYCX_WINDOWSIZE;
159 if (!detect_cyc2x(hw->dpmbase)) {
160 pr_err("adapter Cyclom 2X not found at address 0x%lX!\n",
165 pr_info("found Cyclom 2X card at address 0x%lX\n", dpmbase);
167 /* Load firmware. If loader fails then shut down adapter */
168 err = load_cyc2x(hw, cfm, len);
171 cycx_down(hw); /* shutdown adapter */
176 EXPORT_SYMBOL(cycx_down);
177 int cycx_down(struct cycx_hw *hw)
179 iounmap(hw->dpmbase);
183 /* Enable interrupt generation. */
184 static void cycx_inten(struct cycx_hw *hw)
186 writeb(0, hw->dpmbase);
189 /* Generate an interrupt to adapter's CPU. */
190 EXPORT_SYMBOL(cycx_intr);
191 void cycx_intr(struct cycx_hw *hw)
193 writew(0, hw->dpmbase + GEN_CYCX_INTR);
196 /* Execute Adapter Command.
198 * o Busy-wait until flag is reset. */
199 EXPORT_SYMBOL(cycx_exec);
200 int cycx_exec(void __iomem *addr)
203 /* wait till addr content is zeroed */
205 while (readw(addr)) {
215 /* Read absolute adapter memory.
216 * Transfer data from adapter's memory to data buffer. */
217 EXPORT_SYMBOL(cycx_peek);
218 int cycx_peek(struct cycx_hw *hw, u32 addr, void *buf, u32 len)
221 *(u8*)buf = readb(hw->dpmbase + addr);
223 memcpy_fromio(buf, hw->dpmbase + addr, len);
228 /* Write Absolute Adapter Memory.
229 * Transfer data from data buffer to adapter's memory. */
230 EXPORT_SYMBOL(cycx_poke);
231 int cycx_poke(struct cycx_hw *hw, u32 addr, void *buf, u32 len)
234 writeb(*(u8*)buf, hw->dpmbase + addr);
236 memcpy_toio(hw->dpmbase + addr, buf, len);
241 /* Hardware-Specific Functions */
243 /* Load Aux Routines */
244 /* Reset board hardware.
245 return 1 if memory exists at addr and 0 if not. */
246 static int memory_exists(void __iomem *addr)
250 for (; tries < 3 ; tries++) {
251 writew(TEST_PATTERN, addr + 0x10);
253 if (readw(addr + 0x10) == TEST_PATTERN)
254 if (readw(addr + 0x10) == TEST_PATTERN)
257 msleep_interruptible(1 * 1000);
263 /* Load reset code. */
264 static void reset_load(void __iomem *addr, u8 *buffer, u32 cnt)
266 void __iomem *pt_code = addr + RESET_OFFSET;
269 for (i = 0 ; i < cnt ; i++) {
270 /* for (j = 0 ; j < 50 ; j++); Delay - FIXME busy waiting... */
271 writeb(*buffer++, pt_code++);
275 /* Load buffer using boot interface.
276 * o copy data from buffer to Cyclom-X memory
277 * o wait for reset code to copy it to right portion of memory */
278 static int buffer_load(void __iomem *addr, u8 *buffer, u32 cnt)
280 memcpy_toio(addr + DATA_OFFSET, buffer, cnt);
281 writew(GEN_BOOT_DAT, addr + CMD_OFFSET);
283 return wait_cyc(addr);
286 /* Set up entry point and kick start Cyclom-X CPU. */
287 static void cycx_start(void __iomem *addr)
289 /* put in 0x30 offset the jump instruction to the code entry point */
290 writeb(0xea, addr + 0x30);
291 writeb(0x00, addr + 0x31);
292 writeb(0xc4, addr + 0x32);
293 writeb(0x00, addr + 0x33);
294 writeb(0x00, addr + 0x34);
296 /* cmd to start executing code */
297 writew(GEN_START, addr + CMD_OFFSET);
300 /* Load and boot reset code. */
301 static void cycx_reset_boot(void __iomem *addr, u8 *code, u32 len)
303 void __iomem *pt_start = addr + START_OFFSET;
305 writeb(0xea, pt_start++); /* jmp to f000:3f00 */
306 writeb(0x00, pt_start++);
307 writeb(0xfc, pt_start++);
308 writeb(0x00, pt_start++);
309 writeb(0xf0, pt_start);
310 reset_load(addr, code, len);
312 /* 80186 was in hold, go */
313 writeb(0, addr + START_CPU);
314 msleep_interruptible(1 * 1000);
317 /* Load data.bin file through boot (reset) interface. */
318 static int cycx_data_boot(void __iomem *addr, u8 *code, u32 len)
320 void __iomem *pt_boot_cmd = addr + CMD_OFFSET;
323 /* boot buffer length */
324 writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
325 writew(GEN_DEFPAR, pt_boot_cmd);
327 if (wait_cyc(addr) < 0)
330 writew(0, pt_boot_cmd + sizeof(u16));
331 writew(0x4000, pt_boot_cmd + 2 * sizeof(u16));
332 writew(GEN_SET_SEG, pt_boot_cmd);
334 if (wait_cyc(addr) < 0)
337 for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ)
338 if (buffer_load(addr, code + i,
339 min_t(u32, CFM_LOAD_BUFSZ, (len - i))) < 0) {
340 pr_err("Error !!\n");
348 /* Load code.bin file through boot (reset) interface. */
349 static int cycx_code_boot(void __iomem *addr, u8 *code, u32 len)
351 void __iomem *pt_boot_cmd = addr + CMD_OFFSET;
354 /* boot buffer length */
355 writew(CFM_LOAD_BUFSZ, pt_boot_cmd + sizeof(u16));
356 writew(GEN_DEFPAR, pt_boot_cmd);
358 if (wait_cyc(addr) < 0)
361 writew(0x0000, pt_boot_cmd + sizeof(u16));
362 writew(0xc400, pt_boot_cmd + 2 * sizeof(u16));
363 writew(GEN_SET_SEG, pt_boot_cmd);
365 if (wait_cyc(addr) < 0)
368 for (i = 0 ; i < len ; i += CFM_LOAD_BUFSZ)
369 if (buffer_load(addr, code + i,
370 min_t(u32, CFM_LOAD_BUFSZ, (len - i)))) {
371 pr_err("Error !!\n");
378 /* Load adapter from the memory image of the CYCX firmware module.
379 * o verify firmware integrity and compatibility
380 * o start adapter up */
381 static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len)
384 struct cycx_fw_header *img_hdr;
388 void __iomem *pt_cycld = hw->dpmbase + 0x400;
392 pr_info("firmware signature=\"%s\"\n", cfm->signature);
394 /* Verify firmware signature */
395 if (strcmp(cfm->signature, CFM_SIGNATURE)) {
396 pr_err("load_cyc2x: not Cyclom-2X firmware!\n");
400 pr_info("firmware version=%u\n", cfm->version);
402 /* Verify firmware module format version */
403 if (cfm->version != CFM_VERSION) {
404 pr_err("%s: firmware format %u rejected! Expecting %u.\n",
405 __func__, cfm->version, CFM_VERSION);
409 /* Verify firmware module length and checksum */
410 cksum = checksum((u8*)&cfm->info, sizeof(struct cycx_fw_info) +
413 FIXME cfm->info.codesize is off by 2
414 if (((len - sizeof(struct cycx_firmware) - 1) != cfm->info.codesize) ||
416 if (cksum != cfm->checksum) {
417 pr_err("%s: firmware corrupted!\n", __func__);
418 pr_err(" cdsize = 0x%x (expected 0x%lx)\n",
419 len - (int)sizeof(struct cycx_firmware) - 1,
421 pr_err(" chksum = 0x%x (expected 0x%x)\n",
422 cksum, cfm->checksum);
426 /* If everything is ok, set reset, data and code pointers */
427 img_hdr = (struct cycx_fw_header *)&cfm->image;
428 #ifdef FIRMWARE_DEBUG
429 pr_info("%s: image sizes\n", __func__);
430 pr_info(" reset=%lu\n", img_hdr->reset_size);
431 pr_info(" data=%lu\n", img_hdr->data_size);
432 pr_info(" code=%lu\n", img_hdr->code_size);
434 reset_image = ((u8 *)img_hdr) + sizeof(struct cycx_fw_header);
435 data_image = reset_image + img_hdr->reset_size;
436 code_image = data_image + img_hdr->data_size;
438 /*---- Start load ----*/
440 pr_info("loading firmware %s (ID=%u)...\n",
441 cfm->descr[0] ? cfm->descr : "unknown firmware",
444 for (i = 0 ; i < 5 ; i++) {
445 /* Reset Cyclom hardware */
446 if (!reset_cyc2x(hw->dpmbase)) {
447 pr_err("dpm problem or board not found\n");
452 cycx_reset_boot(hw->dpmbase, reset_image, img_hdr->reset_size);
453 /* reset is waiting for boot */
454 writew(GEN_POWER_ON, pt_cycld);
455 msleep_interruptible(1 * 1000);
457 for (j = 0 ; j < 3 ; j++)
458 if (!readw(pt_cycld))
461 msleep_interruptible(1 * 1000);
464 pr_err("reset not started\n");
469 if (cycx_data_boot(hw->dpmbase, data_image, img_hdr->data_size)) {
470 pr_err("cannot load data file\n");
475 if (cycx_code_boot(hw->dpmbase, code_image, img_hdr->code_size)) {
476 pr_err("cannot load code file\n");
480 /* Prepare boot-time configuration data */
484 cycx_start(hw->dpmbase);
486 /* Arthur Ganzert's tip: wait a while after the firmware loading...
487 seg abr 26 17:17:12 EST 1999 - acme */
488 msleep_interruptible(7 * 1000);
489 pr_info("firmware loaded!\n");
491 /* enable interrupts */
497 /* Prepare boot-time firmware configuration data.
498 * o initialize configuration data area
499 From async.doc - V_3.4.0 - 07/18/1994
500 - As of now, only static buffers are available to the user.
501 So, the bit VD_RXDIRC must be set in 'valid'. That means that user
502 wants to use the static transmission and reception buffers. */
503 static void cycx_bootcfg(struct cycx_hw *hw)
505 /* use fixed buffers */
506 writeb(FIXED_BUFFERS, hw->dpmbase + CONF_OFFSET);
509 /* Detect Cyclom 2x adapter.
510 * Following tests are used to detect Cyclom 2x adapter:
511 * to be completed based on the tests done below
512 * Return 1 if detected o.k. or 0 if failed.
513 * Note: This test is destructive! Adapter will be left in shutdown
514 * state after the test. */
515 static int detect_cyc2x(void __iomem *addr)
519 return memory_exists(addr);
523 /* Get option's index into the options list.
524 * Return option's index (1 .. N) or zero if option is invalid. */
525 static int get_option_index(const long *optlist, long optval)
529 for (; i <= optlist[0]; ++i)
530 if (optlist[i] == optval)
536 /* Reset adapter's CPU. */
537 static int reset_cyc2x(void __iomem *addr)
539 writeb(0, addr + RST_ENABLE);
540 msleep_interruptible(2 * 1000);
541 writeb(0, addr + RST_DISABLE);
542 msleep_interruptible(2 * 1000);
544 return memory_exists(addr);
547 /* Calculate 16-bit CRC using CCITT polynomial. */
548 static u16 checksum(u8 *buf, u32 len)
553 for (; len; --len, ++buf)
554 for (mask = 0x80; mask; mask >>= 1) {
555 flag = (crc & 0x8000);
557 crc |= ((*buf & mask) ? 1 : 0);
566 module_init(cycx_drv_init);
567 module_exit(cycx_drv_cleanup);