2 * This code is derived from the VIA reference driver (copyright message
3 * below) provided to Red Hat by VIA Networking Technologies, Inc. for
4 * addition to the Linux kernel.
6 * The code has been merged into one source file, cleaned up to follow
7 * Linux coding style, ported to the Linux 2.6 kernel tree and cleaned
8 * for 64bit hardware platforms.
12 * rx_copybreak/alignment
16 * The changes are (c) Copyright 2004, Red Hat Inc. <alan@redhat.com>
17 * Additional fixes and clean up: Francois Romieu
19 * This source has not been verified for use in safety critical systems.
21 * Please direct queries about the revamped driver to the linux-kernel
26 * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
27 * All rights reserved.
29 * This software may be redistributed and/or modified under
30 * the terms of the GNU General Public License as published by the Free
31 * Software Foundation; either version 2 of the License, or
34 * This program is distributed in the hope that it will be useful, but
35 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
36 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
39 * Author: Chuang Liang-Shing, AJ Jiang
43 * MODULE_LICENSE("GPL");
48 #include <linux/module.h>
49 #include <linux/types.h>
50 #include <linux/init.h>
52 #include <linux/errno.h>
53 #include <linux/ioport.h>
54 #include <linux/pci.h>
55 #include <linux/kernel.h>
56 #include <linux/netdevice.h>
57 #include <linux/etherdevice.h>
58 #include <linux/skbuff.h>
59 #include <linux/delay.h>
60 #include <linux/timer.h>
61 #include <linux/slab.h>
62 #include <linux/interrupt.h>
63 #include <linux/string.h>
64 #include <linux/wait.h>
67 #include <asm/uaccess.h>
68 #include <linux/proc_fs.h>
69 #include <linux/inetdevice.h>
70 #include <linux/reboot.h>
71 #include <linux/ethtool.h>
72 #include <linux/mii.h>
74 #include <linux/if_arp.h>
76 #include <linux/tcp.h>
77 #include <linux/udp.h>
78 #include <linux/crc-ccitt.h>
79 #include <linux/crc32.h>
81 #include "via-velocity.h"
84 static int velocity_nics = 0;
85 static int msglevel = MSG_LEVEL_INFO;
88 static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
89 static struct ethtool_ops velocity_ethtool_ops;
95 MODULE_AUTHOR("VIA Networking Technologies, Inc.");
96 MODULE_LICENSE("GPL");
97 MODULE_DESCRIPTION("VIA Networking Velocity Family Gigabit Ethernet Adapter Driver");
99 #define VELOCITY_PARAM(N,D) \
100 static int N[MAX_UNITS]=OPTION_DEFAULT;\
101 module_param_array(N, int, NULL, 0); \
102 MODULE_PARM_DESC(N, D);
104 #define RX_DESC_MIN 64
105 #define RX_DESC_MAX 255
106 #define RX_DESC_DEF 64
107 VELOCITY_PARAM(RxDescriptors, "Number of receive descriptors");
109 #define TX_DESC_MIN 16
110 #define TX_DESC_MAX 256
111 #define TX_DESC_DEF 64
112 VELOCITY_PARAM(TxDescriptors, "Number of transmit descriptors");
114 #define VLAN_ID_MIN 0
115 #define VLAN_ID_MAX 4095
116 #define VLAN_ID_DEF 0
117 /* VID_setting[] is used for setting the VID of NIC.
121 VELOCITY_PARAM(VID_setting, "802.1Q VLAN ID");
123 #define RX_THRESH_MIN 0
124 #define RX_THRESH_MAX 3
125 #define RX_THRESH_DEF 0
126 /* rx_thresh[] is used for controlling the receive fifo threshold.
127 0: indicate the rxfifo threshold is 128 bytes.
128 1: indicate the rxfifo threshold is 512 bytes.
129 2: indicate the rxfifo threshold is 1024 bytes.
130 3: indicate the rxfifo threshold is store & forward.
132 VELOCITY_PARAM(rx_thresh, "Receive fifo threshold");
134 #define DMA_LENGTH_MIN 0
135 #define DMA_LENGTH_MAX 7
136 #define DMA_LENGTH_DEF 0
138 /* DMA_length[] is used for controlling the DMA length
145 6: SF(flush till emply)
146 7: SF(flush till emply)
148 VELOCITY_PARAM(DMA_length, "DMA length");
150 #define TAGGING_DEF 0
151 /* enable_tagging[] is used for enabling 802.1Q VID tagging.
152 0: disable VID seeting(default).
153 1: enable VID setting.
155 VELOCITY_PARAM(enable_tagging, "Enable 802.1Q tagging");
157 #define IP_ALIG_DEF 0
158 /* IP_byte_align[] is used for IP header DWORD byte aligned
159 0: indicate the IP header won't be DWORD byte aligned.(Default) .
160 1: indicate the IP header will be DWORD byte aligned.
161 In some enviroment, the IP header should be DWORD byte aligned,
162 or the packet will be droped when we receive it. (eg: IPVS)
164 VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned");
166 #define TX_CSUM_DEF 1
167 /* txcsum_offload[] is used for setting the checksum offload ability of NIC.
168 (We only support RX checksum offload now)
169 0: disable csum_offload[checksum offload
170 1: enable checksum offload. (Default)
172 VELOCITY_PARAM(txcsum_offload, "Enable transmit packet checksum offload");
174 #define FLOW_CNTL_DEF 1
175 #define FLOW_CNTL_MIN 1
176 #define FLOW_CNTL_MAX 5
178 /* flow_control[] is used for setting the flow control ability of NIC.
179 1: hardware deafult - AUTO (default). Use Hardware default value in ANAR.
180 2: enable TX flow control.
181 3: enable RX flow control.
182 4: enable RX/TX flow control.
185 VELOCITY_PARAM(flow_control, "Enable flow control ability");
187 #define MED_LNK_DEF 0
188 #define MED_LNK_MIN 0
189 #define MED_LNK_MAX 4
190 /* speed_duplex[] is used for setting the speed and duplex mode of NIC.
191 0: indicate autonegotiation for both speed and duplex mode
192 1: indicate 100Mbps half duplex mode
193 2: indicate 100Mbps full duplex mode
194 3: indicate 10Mbps half duplex mode
195 4: indicate 10Mbps full duplex mode
198 if EEPROM have been set to the force mode, this option is ignored
201 VELOCITY_PARAM(speed_duplex, "Setting the speed and duplex mode");
203 #define VAL_PKT_LEN_DEF 0
204 /* ValPktLen[] is used for setting the checksum offload ability of NIC.
205 0: Receive frame with invalid layer 2 length (Default)
206 1: Drop frame with invalid layer 2 length
208 VELOCITY_PARAM(ValPktLen, "Receiving or Drop invalid 802.3 frame");
210 #define WOL_OPT_DEF 0
211 #define WOL_OPT_MIN 0
212 #define WOL_OPT_MAX 7
213 /* wol_opts[] is used for controlling wake on lan behavior.
214 0: Wake up if recevied a magic packet. (Default)
215 1: Wake up if link status is on/off.
216 2: Wake up if recevied an arp packet.
217 4: Wake up if recevied any unicast packet.
218 Those value can be sumed up to support more than one option.
220 VELOCITY_PARAM(wol_opts, "Wake On Lan options");
222 #define INT_WORKS_DEF 20
223 #define INT_WORKS_MIN 10
224 #define INT_WORKS_MAX 64
226 VELOCITY_PARAM(int_works, "Number of packets per interrupt services");
228 static int rx_copybreak = 200;
229 module_param(rx_copybreak, int, 0644);
230 MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
232 static void velocity_init_info(struct pci_dev *pdev, struct velocity_info *vptr,
233 const struct velocity_info_tbl *info);
234 static int velocity_get_pci_info(struct velocity_info *, struct pci_dev *pdev);
235 static void velocity_print_info(struct velocity_info *vptr);
236 static int velocity_open(struct net_device *dev);
237 static int velocity_change_mtu(struct net_device *dev, int mtu);
238 static int velocity_xmit(struct sk_buff *skb, struct net_device *dev);
239 static int velocity_intr(int irq, void *dev_instance, struct pt_regs *regs);
240 static void velocity_set_multi(struct net_device *dev);
241 static struct net_device_stats *velocity_get_stats(struct net_device *dev);
242 static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
243 static int velocity_close(struct net_device *dev);
244 static int velocity_receive_frame(struct velocity_info *, int idx);
245 static int velocity_alloc_rx_buf(struct velocity_info *, int idx);
246 static void velocity_free_rd_ring(struct velocity_info *vptr);
247 static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_info *);
248 static int velocity_soft_reset(struct velocity_info *vptr);
249 static void mii_init(struct velocity_info *vptr, u32 mii_status);
250 static u32 velocity_get_link(struct net_device *dev);
251 static u32 velocity_get_opt_media_mode(struct velocity_info *vptr);
252 static void velocity_print_link_status(struct velocity_info *vptr);
253 static void safe_disable_mii_autopoll(struct mac_regs __iomem * regs);
254 static void velocity_shutdown(struct velocity_info *vptr);
255 static void enable_flow_control_ability(struct velocity_info *vptr);
256 static void enable_mii_autopoll(struct mac_regs __iomem * regs);
257 static int velocity_mii_read(struct mac_regs __iomem *, u8 byIdx, u16 * pdata);
258 static int velocity_mii_write(struct mac_regs __iomem *, u8 byMiiAddr, u16 data);
259 static u32 mii_check_media_mode(struct mac_regs __iomem * regs);
260 static u32 check_connection_type(struct mac_regs __iomem * regs);
261 static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status);
265 static int velocity_suspend(struct pci_dev *pdev, pm_message_t state);
266 static int velocity_resume(struct pci_dev *pdev);
268 static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr);
270 static struct notifier_block velocity_inetaddr_notifier = {
271 .notifier_call = velocity_netdev_event,
274 static DEFINE_SPINLOCK(velocity_dev_list_lock);
275 static LIST_HEAD(velocity_dev_list);
277 static void velocity_register_notifier(void)
279 register_inetaddr_notifier(&velocity_inetaddr_notifier);
282 static void velocity_unregister_notifier(void)
284 unregister_inetaddr_notifier(&velocity_inetaddr_notifier);
287 #else /* CONFIG_PM */
289 #define velocity_register_notifier() do {} while (0)
290 #define velocity_unregister_notifier() do {} while (0)
292 #endif /* !CONFIG_PM */
295 * Internal board variants. At the moment we have only one
298 static const struct velocity_info_tbl chip_info_table[] __devinitdata = {
299 {CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 1, 0x00FFFFFFUL},
304 * Describe the PCI device identifiers that we support in this
305 * device driver. Used for hotplug autoloading.
308 static const struct pci_device_id velocity_id_table[] __devinitdata = {
309 { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) },
313 MODULE_DEVICE_TABLE(pci, velocity_id_table);
316 * get_chip_name - identifier to name
317 * @id: chip identifier
319 * Given a chip identifier return a suitable description. Returns
320 * a pointer a static string valid while the driver is loaded.
323 static char __devinit *get_chip_name(enum chip_type chip_id)
326 for (i = 0; chip_info_table[i].name != NULL; i++)
327 if (chip_info_table[i].chip_id == chip_id)
329 return chip_info_table[i].name;
333 * velocity_remove1 - device unplug
334 * @pdev: PCI device being removed
336 * Device unload callback. Called on an unplug or on module
337 * unload for each active device that is present. Disconnects
338 * the device from the network layer and frees all the resources
341 static void __devexit velocity_remove1(struct pci_dev *pdev)
343 struct net_device *dev = pci_get_drvdata(pdev);
344 struct velocity_info *vptr = netdev_priv(dev);
349 spin_lock_irqsave(&velocity_dev_list_lock, flags);
350 if (!list_empty(&velocity_dev_list))
351 list_del(&vptr->list);
352 spin_unlock_irqrestore(&velocity_dev_list_lock, flags);
354 unregister_netdev(dev);
355 iounmap(vptr->mac_regs);
356 pci_release_regions(pdev);
357 pci_disable_device(pdev);
358 pci_set_drvdata(pdev, NULL);
365 * velocity_set_int_opt - parser for integer options
366 * @opt: pointer to option value
367 * @val: value the user requested (or -1 for default)
368 * @min: lowest value allowed
369 * @max: highest value allowed
370 * @def: default value
371 * @name: property name
374 * Set an integer property in the module options. This function does
375 * all the verification and checking as well as reporting so that
376 * we don't duplicate code for each option.
379 static void __devinit velocity_set_int_opt(int *opt, int val, int min, int max, int def, char *name, char *devname)
383 else if (val < min || val > max) {
384 VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (%d-%d)\n",
385 devname, name, min, max);
388 VELOCITY_PRT(MSG_LEVEL_INFO, KERN_INFO "%s: set value of parameter %s to %d\n",
395 * velocity_set_bool_opt - parser for boolean options
396 * @opt: pointer to option value
397 * @val: value the user requested (or -1 for default)
398 * @def: default value (yes/no)
399 * @flag: numeric value to set for true.
400 * @name: property name
403 * Set a boolean property in the module options. This function does
404 * all the verification and checking as well as reporting so that
405 * we don't duplicate code for each option.
408 static void __devinit velocity_set_bool_opt(u32 * opt, int val, int def, u32 flag, char *name, char *devname)
412 *opt |= (def ? flag : 0);
413 else if (val < 0 || val > 1) {
414 printk(KERN_NOTICE "%s: the value of parameter %s is invalid, the valid range is (0-1)\n",
416 *opt |= (def ? flag : 0);
418 printk(KERN_INFO "%s: set parameter %s to %s\n",
419 devname, name, val ? "TRUE" : "FALSE");
420 *opt |= (val ? flag : 0);
425 * velocity_get_options - set options on device
426 * @opts: option structure for the device
427 * @index: index of option to use in module options array
428 * @devname: device name
430 * Turn the module and command options into a single structure
431 * for the current device
434 static void __devinit velocity_get_options(struct velocity_opt *opts, int index, char *devname)
437 velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index], RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF, "rx_thresh", devname);
438 velocity_set_int_opt(&opts->DMA_length, DMA_length[index], DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF, "DMA_length", devname);
439 velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname);
440 velocity_set_int_opt(&opts->numtx, TxDescriptors[index], TX_DESC_MIN, TX_DESC_MAX, TX_DESC_DEF, "TxDescriptors", devname);
441 velocity_set_int_opt(&opts->vid, VID_setting[index], VLAN_ID_MIN, VLAN_ID_MAX, VLAN_ID_DEF, "VID_setting", devname);
442 velocity_set_bool_opt(&opts->flags, enable_tagging[index], TAGGING_DEF, VELOCITY_FLAGS_TAGGING, "enable_tagging", devname);
443 velocity_set_bool_opt(&opts->flags, txcsum_offload[index], TX_CSUM_DEF, VELOCITY_FLAGS_TX_CSUM, "txcsum_offload", devname);
444 velocity_set_int_opt(&opts->flow_cntl, flow_control[index], FLOW_CNTL_MIN, FLOW_CNTL_MAX, FLOW_CNTL_DEF, "flow_control", devname);
445 velocity_set_bool_opt(&opts->flags, IP_byte_align[index], IP_ALIG_DEF, VELOCITY_FLAGS_IP_ALIGN, "IP_byte_align", devname);
446 velocity_set_bool_opt(&opts->flags, ValPktLen[index], VAL_PKT_LEN_DEF, VELOCITY_FLAGS_VAL_PKT_LEN, "ValPktLen", devname);
447 velocity_set_int_opt((int *) &opts->spd_dpx, speed_duplex[index], MED_LNK_MIN, MED_LNK_MAX, MED_LNK_DEF, "Media link mode", devname);
448 velocity_set_int_opt((int *) &opts->wol_opts, wol_opts[index], WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF, "Wake On Lan options", devname);
449 velocity_set_int_opt((int *) &opts->int_works, int_works[index], INT_WORKS_MIN, INT_WORKS_MAX, INT_WORKS_DEF, "Interrupt service works", devname);
450 opts->numrx = (opts->numrx & ~3);
454 * velocity_init_cam_filter - initialise CAM
455 * @vptr: velocity to program
457 * Initialize the content addressable memory used for filters. Load
458 * appropriately according to the presence of VLAN
461 static void velocity_init_cam_filter(struct velocity_info *vptr)
463 struct mac_regs __iomem * regs = vptr->mac_regs;
465 /* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */
466 WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, ®s->MCFG);
467 WORD_REG_BITS_ON(MCFG_VIDFR, ®s->MCFG);
469 /* Disable all CAMs */
470 memset(vptr->vCAMmask, 0, sizeof(u8) * 8);
471 memset(vptr->mCAMmask, 0, sizeof(u8) * 8);
472 mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM);
473 mac_set_cam_mask(regs, vptr->mCAMmask, VELOCITY_MULTICAST_CAM);
475 /* Enable first VCAM */
476 if (vptr->flags & VELOCITY_FLAGS_TAGGING) {
477 /* If Tagging option is enabled and VLAN ID is not zero, then
478 turn on MCFG_RTGOPT also */
479 if (vptr->options.vid != 0)
480 WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG);
482 mac_set_cam(regs, 0, (u8 *) & (vptr->options.vid), VELOCITY_VLAN_ID_CAM);
483 vptr->vCAMmask[0] |= 1;
484 mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM);
487 mac_set_cam(regs, 0, (u8 *) &temp, VELOCITY_VLAN_ID_CAM);
489 mac_set_cam_mask(regs, (u8 *) &temp, VELOCITY_VLAN_ID_CAM);
494 * velocity_rx_reset - handle a receive reset
495 * @vptr: velocity we are resetting
497 * Reset the ownership and status for the receive ring side.
498 * Hand all the receive queue to the NIC.
501 static void velocity_rx_reset(struct velocity_info *vptr)
504 struct mac_regs __iomem * regs = vptr->mac_regs;
507 vptr->rd_dirty = vptr->rd_filled = vptr->rd_curr = 0;
510 * Init state, all RD entries belong to the NIC
512 for (i = 0; i < vptr->options.numrx; ++i)
513 vptr->rd_ring[i].rdesc0.owner = OWNED_BY_NIC;
515 writew(vptr->options.numrx, ®s->RBRDU);
516 writel(vptr->rd_pool_dma, ®s->RDBaseLo);
517 writew(0, ®s->RDIdx);
518 writew(vptr->options.numrx - 1, ®s->RDCSize);
522 * velocity_init_registers - initialise MAC registers
523 * @vptr: velocity to init
524 * @type: type of initialisation (hot or cold)
526 * Initialise the MAC on a reset or on first set up on the
530 static void velocity_init_registers(struct velocity_info *vptr,
531 enum velocity_init_type type)
533 struct mac_regs __iomem * regs = vptr->mac_regs;
539 case VELOCITY_INIT_RESET:
540 case VELOCITY_INIT_WOL:
542 netif_stop_queue(vptr->dev);
545 * Reset RX to prevent RX pointer not on the 4X location
547 velocity_rx_reset(vptr);
548 mac_rx_queue_run(regs);
549 mac_rx_queue_wake(regs);
551 mii_status = velocity_get_opt_media_mode(vptr);
552 if (velocity_set_media_mode(vptr, mii_status) != VELOCITY_LINK_CHANGE) {
553 velocity_print_link_status(vptr);
554 if (!(vptr->mii_status & VELOCITY_LINK_FAIL))
555 netif_wake_queue(vptr->dev);
558 enable_flow_control_ability(vptr);
561 writel(CR0_STOP, ®s->CR0Clr);
562 writel((CR0_DPOLL | CR0_TXON | CR0_RXON | CR0_STRT),
567 case VELOCITY_INIT_COLD:
572 velocity_soft_reset(vptr);
575 mac_eeprom_reload(regs);
576 for (i = 0; i < 6; i++) {
577 writeb(vptr->dev->dev_addr[i], &(regs->PAR[i]));
580 * clear Pre_ACPI bit.
582 BYTE_REG_BITS_OFF(CFGA_PACPI, &(regs->CFGA));
583 mac_set_rx_thresh(regs, vptr->options.rx_thresh);
584 mac_set_dma_length(regs, vptr->options.DMA_length);
586 writeb(WOLCFG_SAM | WOLCFG_SAB, ®s->WOLCFGSet);
588 * Back off algorithm use original IEEE standard
590 BYTE_REG_BITS_SET(CFGB_OFSET, (CFGB_CRANDOM | CFGB_CAP | CFGB_MBA | CFGB_BAKOPT), ®s->CFGB);
595 velocity_init_cam_filter(vptr);
598 * Set packet filter: Receive directed and broadcast address
600 velocity_set_multi(vptr->dev);
603 * Enable MII auto-polling
605 enable_mii_autopoll(regs);
607 vptr->int_mask = INT_MASK_DEF;
609 writel(cpu_to_le32(vptr->rd_pool_dma), ®s->RDBaseLo);
610 writew(vptr->options.numrx - 1, ®s->RDCSize);
611 mac_rx_queue_run(regs);
612 mac_rx_queue_wake(regs);
614 writew(vptr->options.numtx - 1, ®s->TDCSize);
616 for (i = 0; i < vptr->num_txq; i++) {
617 writel(cpu_to_le32(vptr->td_pool_dma[i]), &(regs->TDBaseLo[i]));
618 mac_tx_queue_run(regs, i);
621 init_flow_control_register(vptr);
623 writel(CR0_STOP, ®s->CR0Clr);
624 writel((CR0_DPOLL | CR0_TXON | CR0_RXON | CR0_STRT), ®s->CR0Set);
626 mii_status = velocity_get_opt_media_mode(vptr);
627 netif_stop_queue(vptr->dev);
629 mii_init(vptr, mii_status);
631 if (velocity_set_media_mode(vptr, mii_status) != VELOCITY_LINK_CHANGE) {
632 velocity_print_link_status(vptr);
633 if (!(vptr->mii_status & VELOCITY_LINK_FAIL))
634 netif_wake_queue(vptr->dev);
637 enable_flow_control_ability(vptr);
638 mac_hw_mibs_init(regs);
639 mac_write_int_mask(vptr->int_mask, regs);
646 * velocity_soft_reset - soft reset
647 * @vptr: velocity to reset
649 * Kick off a soft reset of the velocity adapter and then poll
650 * until the reset sequence has completed before returning.
653 static int velocity_soft_reset(struct velocity_info *vptr)
655 struct mac_regs __iomem * regs = vptr->mac_regs;
658 writel(CR0_SFRST, ®s->CR0Set);
660 for (i = 0; i < W_MAX_TIMEOUT; i++) {
662 if (!DWORD_REG_BITS_IS_ON(CR0_SFRST, ®s->CR0Set))
666 if (i == W_MAX_TIMEOUT) {
667 writel(CR0_FORSRST, ®s->CR0Set);
668 /* FIXME: PCI POSTING */
676 * velocity_found1 - set up discovered velocity card
678 * @ent: PCI device table entry that matched
680 * Configure a discovered adapter from scratch. Return a negative
681 * errno error code on failure paths.
684 static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_device_id *ent)
686 static int first = 1;
687 struct net_device *dev;
689 const struct velocity_info_tbl *info = &chip_info_table[ent->driver_data];
690 struct velocity_info *vptr;
691 struct mac_regs __iomem * regs;
694 /* FIXME: this driver, like almost all other ethernet drivers,
695 * can support more than MAX_UNITS.
697 if (velocity_nics >= MAX_UNITS) {
698 dev_notice(&pdev->dev, "already found %d NICs.\n",
703 dev = alloc_etherdev(sizeof(struct velocity_info));
705 dev_err(&pdev->dev, "allocate net device failed.\n");
709 /* Chain it all together */
711 SET_MODULE_OWNER(dev);
712 SET_NETDEV_DEV(dev, &pdev->dev);
713 vptr = netdev_priv(dev);
717 printk(KERN_INFO "%s Ver. %s\n",
718 VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION);
719 printk(KERN_INFO "Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n");
720 printk(KERN_INFO "Copyright (c) 2004 Red Hat Inc.\n");
724 velocity_init_info(pdev, vptr, info);
728 dev->irq = pdev->irq;
730 ret = pci_enable_device(pdev);
734 ret = velocity_get_pci_info(vptr, pdev);
736 /* error message already printed */
740 ret = pci_request_regions(pdev, VELOCITY_NAME);
742 dev_err(&pdev->dev, "No PCI resources.\n");
746 regs = ioremap(vptr->memaddr, VELOCITY_IO_SIZE);
749 goto err_release_res;
752 vptr->mac_regs = regs;
756 dev->base_addr = vptr->ioaddr;
758 for (i = 0; i < 6; i++)
759 dev->dev_addr[i] = readb(®s->PAR[i]);
762 velocity_get_options(&vptr->options, velocity_nics, dev->name);
765 * Mask out the options cannot be set to the chip
768 vptr->options.flags &= info->flags;
771 * Enable the chip specified capbilities
774 vptr->flags = vptr->options.flags | (info->flags & 0xFF000000UL);
776 vptr->wol_opts = vptr->options.wol_opts;
777 vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
779 vptr->phy_id = MII_GET_PHY_ID(vptr->mac_regs);
781 dev->irq = pdev->irq;
782 dev->open = velocity_open;
783 dev->hard_start_xmit = velocity_xmit;
784 dev->stop = velocity_close;
785 dev->get_stats = velocity_get_stats;
786 dev->set_multicast_list = velocity_set_multi;
787 dev->do_ioctl = velocity_ioctl;
788 dev->ethtool_ops = &velocity_ethtool_ops;
789 dev->change_mtu = velocity_change_mtu;
790 #ifdef VELOCITY_ZERO_COPY_SUPPORT
791 dev->features |= NETIF_F_SG;
794 if (vptr->flags & VELOCITY_FLAGS_TX_CSUM) {
795 dev->features |= NETIF_F_IP_CSUM;
798 ret = register_netdev(dev);
802 if (velocity_get_link(dev))
803 netif_carrier_off(dev);
805 velocity_print_info(vptr);
806 pci_set_drvdata(pdev, dev);
808 /* and leave the chip powered down */
810 pci_set_power_state(pdev, PCI_D3hot);
815 spin_lock_irqsave(&velocity_dev_list_lock, flags);
816 list_add(&vptr->list, &velocity_dev_list);
817 spin_unlock_irqrestore(&velocity_dev_list_lock, flags);
827 pci_release_regions(pdev);
829 pci_disable_device(pdev);
836 * velocity_print_info - per driver data
839 * Print per driver data as the kernel driver finds Velocity
843 static void __devinit velocity_print_info(struct velocity_info *vptr)
845 struct net_device *dev = vptr->dev;
847 printk(KERN_INFO "%s: %s\n", dev->name, get_chip_name(vptr->chip_id));
848 printk(KERN_INFO "%s: Ethernet Address: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n",
850 dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
851 dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
855 * velocity_init_info - init private data
857 * @vptr: Velocity info
860 * Set up the initial velocity_info struct for the device that has been
864 static void __devinit velocity_init_info(struct pci_dev *pdev,
865 struct velocity_info *vptr,
866 const struct velocity_info_tbl *info)
868 memset(vptr, 0, sizeof(struct velocity_info));
871 vptr->chip_id = info->chip_id;
872 vptr->num_txq = info->txqueue;
873 vptr->multicast_limit = MCAM_SIZE;
874 spin_lock_init(&vptr->lock);
875 INIT_LIST_HEAD(&vptr->list);
879 * velocity_get_pci_info - retrieve PCI info for device
880 * @vptr: velocity device
881 * @pdev: PCI device it matches
883 * Retrieve the PCI configuration space data that interests us from
884 * the kernel PCI layer
887 static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev)
889 if (pci_read_config_byte(pdev, PCI_REVISION_ID, &vptr->rev_id) < 0)
892 pci_set_master(pdev);
894 vptr->ioaddr = pci_resource_start(pdev, 0);
895 vptr->memaddr = pci_resource_start(pdev, 1);
897 if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
899 "region #0 is not an I/O resource, aborting.\n");
903 if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) {
905 "region #1 is an I/O resource, aborting.\n");
909 if (pci_resource_len(pdev, 1) < VELOCITY_IO_SIZE) {
910 dev_err(&pdev->dev, "region #1 is too small.\n");
919 * velocity_init_rings - set up DMA rings
920 * @vptr: Velocity to set up
922 * Allocate PCI mapped DMA rings for the receive and transmit layer
926 static int velocity_init_rings(struct velocity_info *vptr)
935 * Allocate all RD/TD rings a single pool
938 psize = vptr->options.numrx * sizeof(struct rx_desc) +
939 vptr->options.numtx * sizeof(struct tx_desc) * vptr->num_txq;
942 * pci_alloc_consistent() fulfills the requirement for 64 bytes
945 pool = pci_alloc_consistent(vptr->pdev, psize, &pool_dma);
948 printk(KERN_ERR "%s : DMA memory allocation failed.\n",
953 memset(pool, 0, psize);
955 vptr->rd_ring = (struct rx_desc *) pool;
957 vptr->rd_pool_dma = pool_dma;
959 tsize = vptr->options.numtx * PKT_BUF_SZ * vptr->num_txq;
960 vptr->tx_bufs = pci_alloc_consistent(vptr->pdev, tsize,
963 if (vptr->tx_bufs == NULL) {
964 printk(KERN_ERR "%s: DMA memory allocation failed.\n",
966 pci_free_consistent(vptr->pdev, psize, pool, pool_dma);
970 memset(vptr->tx_bufs, 0, vptr->options.numtx * PKT_BUF_SZ * vptr->num_txq);
972 i = vptr->options.numrx * sizeof(struct rx_desc);
975 for (i = 0; i < vptr->num_txq; i++) {
976 int offset = vptr->options.numtx * sizeof(struct tx_desc);
978 vptr->td_pool_dma[i] = pool_dma;
979 vptr->td_rings[i] = (struct tx_desc *) pool;
987 * velocity_free_rings - free PCI ring pointers
988 * @vptr: Velocity to free from
990 * Clean up the PCI ring buffers allocated to this velocity.
993 static void velocity_free_rings(struct velocity_info *vptr)
997 size = vptr->options.numrx * sizeof(struct rx_desc) +
998 vptr->options.numtx * sizeof(struct tx_desc) * vptr->num_txq;
1000 pci_free_consistent(vptr->pdev, size, vptr->rd_ring, vptr->rd_pool_dma);
1002 size = vptr->options.numtx * PKT_BUF_SZ * vptr->num_txq;
1004 pci_free_consistent(vptr->pdev, size, vptr->tx_bufs, vptr->tx_bufs_dma);
1007 static inline void velocity_give_many_rx_descs(struct velocity_info *vptr)
1009 struct mac_regs __iomem *regs = vptr->mac_regs;
1010 int avail, dirty, unusable;
1013 * RD number must be equal to 4X per hardware spec
1014 * (programming guide rev 1.20, p.13)
1016 if (vptr->rd_filled < 4)
1021 unusable = vptr->rd_filled & 0x0003;
1022 dirty = vptr->rd_dirty - unusable;
1023 for (avail = vptr->rd_filled & 0xfffc; avail; avail--) {
1024 dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
1025 vptr->rd_ring[dirty].rdesc0.owner = OWNED_BY_NIC;
1028 writew(vptr->rd_filled & 0xfffc, ®s->RBRDU);
1029 vptr->rd_filled = unusable;
1032 static int velocity_rx_refill(struct velocity_info *vptr)
1034 int dirty = vptr->rd_dirty, done = 0, ret = 0;
1037 struct rx_desc *rd = vptr->rd_ring + dirty;
1039 /* Fine for an all zero Rx desc at init time as well */
1040 if (rd->rdesc0.owner == OWNED_BY_NIC)
1043 if (!vptr->rd_info[dirty].skb) {
1044 ret = velocity_alloc_rx_buf(vptr, dirty);
1049 dirty = (dirty < vptr->options.numrx - 1) ? dirty + 1 : 0;
1050 } while (dirty != vptr->rd_curr);
1053 vptr->rd_dirty = dirty;
1054 vptr->rd_filled += done;
1055 velocity_give_many_rx_descs(vptr);
1062 * velocity_init_rd_ring - set up receive ring
1063 * @vptr: velocity to configure
1065 * Allocate and set up the receive buffers for each ring slot and
1066 * assign them to the network adapter.
1069 static int velocity_init_rd_ring(struct velocity_info *vptr)
1072 unsigned int rsize = sizeof(struct velocity_rd_info) *
1073 vptr->options.numrx;
1075 vptr->rd_info = kmalloc(rsize, GFP_KERNEL);
1076 if(vptr->rd_info == NULL)
1078 memset(vptr->rd_info, 0, rsize);
1080 vptr->rd_filled = vptr->rd_dirty = vptr->rd_curr = 0;
1082 ret = velocity_rx_refill(vptr);
1084 VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR
1085 "%s: failed to allocate RX buffer.\n", vptr->dev->name);
1086 velocity_free_rd_ring(vptr);
1093 * velocity_free_rd_ring - free receive ring
1094 * @vptr: velocity to clean up
1096 * Free the receive buffers for each ring slot and any
1097 * attached socket buffers that need to go away.
1100 static void velocity_free_rd_ring(struct velocity_info *vptr)
1104 if (vptr->rd_info == NULL)
1107 for (i = 0; i < vptr->options.numrx; i++) {
1108 struct velocity_rd_info *rd_info = &(vptr->rd_info[i]);
1109 struct rx_desc *rd = vptr->rd_ring + i;
1111 memset(rd, 0, sizeof(*rd));
1115 pci_unmap_single(vptr->pdev, rd_info->skb_dma, vptr->rx_buf_sz,
1116 PCI_DMA_FROMDEVICE);
1117 rd_info->skb_dma = (dma_addr_t) NULL;
1119 dev_kfree_skb(rd_info->skb);
1120 rd_info->skb = NULL;
1123 kfree(vptr->rd_info);
1124 vptr->rd_info = NULL;
1128 * velocity_init_td_ring - set up transmit ring
1131 * Set up the transmit ring and chain the ring pointers together.
1132 * Returns zero on success or a negative posix errno code for
1136 static int velocity_init_td_ring(struct velocity_info *vptr)
1141 struct velocity_td_info *td_info;
1142 unsigned int tsize = sizeof(struct velocity_td_info) *
1143 vptr->options.numtx;
1145 /* Init the TD ring entries */
1146 for (j = 0; j < vptr->num_txq; j++) {
1147 curr = vptr->td_pool_dma[j];
1149 vptr->td_infos[j] = kmalloc(tsize, GFP_KERNEL);
1150 if(vptr->td_infos[j] == NULL)
1153 kfree(vptr->td_infos[j]);
1156 memset(vptr->td_infos[j], 0, tsize);
1158 for (i = 0; i < vptr->options.numtx; i++, curr += sizeof(struct tx_desc)) {
1159 td = &(vptr->td_rings[j][i]);
1160 td_info = &(vptr->td_infos[j][i]);
1161 td_info->buf = vptr->tx_bufs +
1162 (j * vptr->options.numtx + i) * PKT_BUF_SZ;
1163 td_info->buf_dma = vptr->tx_bufs_dma +
1164 (j * vptr->options.numtx + i) * PKT_BUF_SZ;
1166 vptr->td_tail[j] = vptr->td_curr[j] = vptr->td_used[j] = 0;
1172 * FIXME: could we merge this with velocity_free_tx_buf ?
1175 static void velocity_free_td_ring_entry(struct velocity_info *vptr,
1178 struct velocity_td_info * td_info = &(vptr->td_infos[q][n]);
1181 if (td_info == NULL)
1185 for (i = 0; i < td_info->nskb_dma; i++)
1187 if (td_info->skb_dma[i]) {
1188 pci_unmap_single(vptr->pdev, td_info->skb_dma[i],
1189 td_info->skb->len, PCI_DMA_TODEVICE);
1190 td_info->skb_dma[i] = (dma_addr_t) NULL;
1193 dev_kfree_skb(td_info->skb);
1194 td_info->skb = NULL;
1199 * velocity_free_td_ring - free td ring
1202 * Free up the transmit ring for this particular velocity adapter.
1203 * We free the ring contents but not the ring itself.
1206 static void velocity_free_td_ring(struct velocity_info *vptr)
1210 for (j = 0; j < vptr->num_txq; j++) {
1211 if (vptr->td_infos[j] == NULL)
1213 for (i = 0; i < vptr->options.numtx; i++) {
1214 velocity_free_td_ring_entry(vptr, j, i);
1217 kfree(vptr->td_infos[j]);
1218 vptr->td_infos[j] = NULL;
1223 * velocity_rx_srv - service RX interrupt
1225 * @status: adapter status (unused)
1227 * Walk the receive ring of the velocity adapter and remove
1228 * any received packets from the receive queue. Hand the ring
1229 * slots back to the adapter for reuse.
1232 static int velocity_rx_srv(struct velocity_info *vptr, int status)
1234 struct net_device_stats *stats = &vptr->stats;
1235 int rd_curr = vptr->rd_curr;
1239 struct rx_desc *rd = vptr->rd_ring + rd_curr;
1241 if (!vptr->rd_info[rd_curr].skb)
1244 if (rd->rdesc0.owner == OWNED_BY_NIC)
1250 * Don't drop CE or RL error frame although RXOK is off
1252 if ((rd->rdesc0.RSR & RSR_RXOK) || (!(rd->rdesc0.RSR & RSR_RXOK) && (rd->rdesc0.RSR & (RSR_CE | RSR_RL)))) {
1253 if (velocity_receive_frame(vptr, rd_curr) < 0)
1254 stats->rx_dropped++;
1256 if (rd->rdesc0.RSR & RSR_CRC)
1257 stats->rx_crc_errors++;
1258 if (rd->rdesc0.RSR & RSR_FAE)
1259 stats->rx_frame_errors++;
1261 stats->rx_dropped++;
1266 vptr->dev->last_rx = jiffies;
1269 if (rd_curr >= vptr->options.numrx)
1271 } while (++works <= 15);
1273 vptr->rd_curr = rd_curr;
1275 if (works > 0 && velocity_rx_refill(vptr) < 0) {
1276 VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR
1277 "%s: rx buf allocation failure\n", vptr->dev->name);
1285 * velocity_rx_csum - checksum process
1286 * @rd: receive packet descriptor
1287 * @skb: network layer packet buffer
1289 * Process the status bits for the received packet and determine
1290 * if the checksum was computed and verified by the hardware
1293 static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
1295 skb->ip_summed = CHECKSUM_NONE;
1297 if (rd->rdesc1.CSM & CSM_IPKT) {
1298 if (rd->rdesc1.CSM & CSM_IPOK) {
1299 if ((rd->rdesc1.CSM & CSM_TCPKT) ||
1300 (rd->rdesc1.CSM & CSM_UDPKT)) {
1301 if (!(rd->rdesc1.CSM & CSM_TUPOK)) {
1305 skb->ip_summed = CHECKSUM_UNNECESSARY;
1311 * velocity_rx_copy - in place Rx copy for small packets
1312 * @rx_skb: network layer packet buffer candidate
1313 * @pkt_size: received data size
1314 * @rd: receive packet descriptor
1315 * @dev: network device
1317 * Replace the current skb that is scheduled for Rx processing by a
1318 * shorter, immediatly allocated skb, if the received packet is small
1319 * enough. This function returns a negative value if the received
1320 * packet is too big or if memory is exhausted.
1322 static inline int velocity_rx_copy(struct sk_buff **rx_skb, int pkt_size,
1323 struct velocity_info *vptr)
1327 if (pkt_size < rx_copybreak) {
1328 struct sk_buff *new_skb;
1330 new_skb = dev_alloc_skb(pkt_size + 2);
1332 new_skb->dev = vptr->dev;
1333 new_skb->ip_summed = rx_skb[0]->ip_summed;
1335 if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN)
1336 skb_reserve(new_skb, 2);
1338 memcpy(new_skb->data, rx_skb[0]->data, pkt_size);
1348 * velocity_iph_realign - IP header alignment
1349 * @vptr: velocity we are handling
1350 * @skb: network layer packet buffer
1351 * @pkt_size: received data size
1353 * Align IP header on a 2 bytes boundary. This behavior can be
1354 * configured by the user.
1356 static inline void velocity_iph_realign(struct velocity_info *vptr,
1357 struct sk_buff *skb, int pkt_size)
1359 /* FIXME - memmove ? */
1360 if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) {
1363 for (i = pkt_size; i >= 0; i--)
1364 *(skb->data + i + 2) = *(skb->data + i);
1365 skb_reserve(skb, 2);
1370 * velocity_receive_frame - received packet processor
1371 * @vptr: velocity we are handling
1374 * A packet has arrived. We process the packet and if appropriate
1375 * pass the frame up the network stack
1378 static int velocity_receive_frame(struct velocity_info *vptr, int idx)
1380 void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int);
1381 struct net_device_stats *stats = &vptr->stats;
1382 struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
1383 struct rx_desc *rd = &(vptr->rd_ring[idx]);
1384 int pkt_len = rd->rdesc0.len;
1385 struct sk_buff *skb;
1387 if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP)) {
1388 VELOCITY_PRT(MSG_LEVEL_VERBOSE, KERN_ERR " %s : the received frame span multple RDs.\n", vptr->dev->name);
1389 stats->rx_length_errors++;
1393 if (rd->rdesc0.RSR & RSR_MAR)
1394 vptr->stats.multicast++;
1397 skb->dev = vptr->dev;
1399 pci_dma_sync_single_for_cpu(vptr->pdev, rd_info->skb_dma,
1400 vptr->rx_buf_sz, PCI_DMA_FROMDEVICE);
1403 * Drop frame not meeting IEEE 802.3
1406 if (vptr->flags & VELOCITY_FLAGS_VAL_PKT_LEN) {
1407 if (rd->rdesc0.RSR & RSR_RL) {
1408 stats->rx_length_errors++;
1413 pci_action = pci_dma_sync_single_for_device;
1415 velocity_rx_csum(rd, skb);
1417 if (velocity_rx_copy(&skb, pkt_len, vptr) < 0) {
1418 velocity_iph_realign(vptr, skb, pkt_len);
1419 pci_action = pci_unmap_single;
1420 rd_info->skb = NULL;
1423 pci_action(vptr->pdev, rd_info->skb_dma, vptr->rx_buf_sz,
1424 PCI_DMA_FROMDEVICE);
1426 skb_put(skb, pkt_len - 4);
1427 skb->protocol = eth_type_trans(skb, skb->dev);
1429 stats->rx_bytes += pkt_len;
1436 * velocity_alloc_rx_buf - allocate aligned receive buffer
1440 * Allocate a new full sized buffer for the reception of a frame and
1441 * map it into PCI space for the hardware to use. The hardware
1442 * requires *64* byte alignment of the buffer which makes life
1443 * less fun than would be ideal.
1446 static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
1448 struct rx_desc *rd = &(vptr->rd_ring[idx]);
1449 struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]);
1451 rd_info->skb = dev_alloc_skb(vptr->rx_buf_sz + 64);
1452 if (rd_info->skb == NULL)
1456 * Do the gymnastics to get the buffer head for data at
1459 skb_reserve(rd_info->skb, (unsigned long) rd_info->skb->data & 63);
1460 rd_info->skb->dev = vptr->dev;
1461 rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data, vptr->rx_buf_sz, PCI_DMA_FROMDEVICE);
1464 * Fill in the descriptor to match
1467 *((u32 *) & (rd->rdesc0)) = 0;
1468 rd->len = cpu_to_le32(vptr->rx_buf_sz);
1470 rd->pa_low = cpu_to_le32(rd_info->skb_dma);
1476 * tx_srv - transmit interrupt service
1480 * Scan the queues looking for transmitted packets that
1481 * we can complete and clean up. Update any statistics as
1485 static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
1492 struct velocity_td_info *tdinfo;
1493 struct net_device_stats *stats = &vptr->stats;
1495 for (qnum = 0; qnum < vptr->num_txq; qnum++) {
1496 for (idx = vptr->td_tail[qnum]; vptr->td_used[qnum] > 0;
1497 idx = (idx + 1) % vptr->options.numtx) {
1502 td = &(vptr->td_rings[qnum][idx]);
1503 tdinfo = &(vptr->td_infos[qnum][idx]);
1505 if (td->tdesc0.owner == OWNED_BY_NIC)
1511 if (td->tdesc0.TSR & TSR0_TERR) {
1513 stats->tx_dropped++;
1514 if (td->tdesc0.TSR & TSR0_CDH)
1515 stats->tx_heartbeat_errors++;
1516 if (td->tdesc0.TSR & TSR0_CRS)
1517 stats->tx_carrier_errors++;
1518 if (td->tdesc0.TSR & TSR0_ABT)
1519 stats->tx_aborted_errors++;
1520 if (td->tdesc0.TSR & TSR0_OWC)
1521 stats->tx_window_errors++;
1523 stats->tx_packets++;
1524 stats->tx_bytes += tdinfo->skb->len;
1526 velocity_free_tx_buf(vptr, tdinfo);
1527 vptr->td_used[qnum]--;
1529 vptr->td_tail[qnum] = idx;
1531 if (AVAIL_TD(vptr, qnum) < 1) {
1536 * Look to see if we should kick the transmit network
1537 * layer for more work.
1539 if (netif_queue_stopped(vptr->dev) && (full == 0)
1540 && (!(vptr->mii_status & VELOCITY_LINK_FAIL))) {
1541 netif_wake_queue(vptr->dev);
1547 * velocity_print_link_status - link status reporting
1548 * @vptr: velocity to report on
1550 * Turn the link status of the velocity card into a kernel log
1551 * description of the new link state, detailing speed and duplex
1555 static void velocity_print_link_status(struct velocity_info *vptr)
1558 if (vptr->mii_status & VELOCITY_LINK_FAIL) {
1559 VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: failed to detect cable link\n", vptr->dev->name);
1560 } else if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
1561 VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link autonegation", vptr->dev->name);
1563 if (vptr->mii_status & VELOCITY_SPEED_1000)
1564 VELOCITY_PRT(MSG_LEVEL_INFO, " speed 1000M bps");
1565 else if (vptr->mii_status & VELOCITY_SPEED_100)
1566 VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps");
1568 VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps");
1570 if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
1571 VELOCITY_PRT(MSG_LEVEL_INFO, " full duplex\n");
1573 VELOCITY_PRT(MSG_LEVEL_INFO, " half duplex\n");
1575 VELOCITY_PRT(MSG_LEVEL_INFO, KERN_NOTICE "%s: Link forced", vptr->dev->name);
1576 switch (vptr->options.spd_dpx) {
1577 case SPD_DPX_100_HALF:
1578 VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps half duplex\n");
1580 case SPD_DPX_100_FULL:
1581 VELOCITY_PRT(MSG_LEVEL_INFO, " speed 100M bps full duplex\n");
1583 case SPD_DPX_10_HALF:
1584 VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps half duplex\n");
1586 case SPD_DPX_10_FULL:
1587 VELOCITY_PRT(MSG_LEVEL_INFO, " speed 10M bps full duplex\n");
1596 * velocity_error - handle error from controller
1598 * @status: card status
1600 * Process an error report from the hardware and attempt to recover
1601 * the card itself. At the moment we cannot recover from some
1602 * theoretically impossible errors but this could be fixed using
1603 * the pci_device_failed logic to bounce the hardware
1607 static void velocity_error(struct velocity_info *vptr, int status)
1610 if (status & ISR_TXSTLI) {
1611 struct mac_regs __iomem * regs = vptr->mac_regs;
1613 printk(KERN_ERR "TD structure errror TDindex=%hx\n", readw(®s->TDIdx[0]));
1614 BYTE_REG_BITS_ON(TXESR_TDSTR, ®s->TXESR);
1615 writew(TRDCSR_RUN, ®s->TDCSRClr);
1616 netif_stop_queue(vptr->dev);
1618 /* FIXME: port over the pci_device_failed code and use it
1622 if (status & ISR_SRCI) {
1623 struct mac_regs __iomem * regs = vptr->mac_regs;
1626 if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
1627 vptr->mii_status = check_connection_type(regs);
1630 * If it is a 3119, disable frame bursting in
1631 * halfduplex mode and enable it in fullduplex
1634 if (vptr->rev_id < REV_ID_VT3216_A0) {
1635 if (vptr->mii_status | VELOCITY_DUPLEX_FULL)
1636 BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR);
1638 BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR);
1641 * Only enable CD heart beat counter in 10HD mode
1643 if (!(vptr->mii_status & VELOCITY_DUPLEX_FULL) && (vptr->mii_status & VELOCITY_SPEED_10)) {
1644 BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG);
1646 BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG);
1650 * Get link status from PHYSR0
1652 linked = readb(®s->PHYSR0) & PHYSR0_LINKGD;
1655 vptr->mii_status &= ~VELOCITY_LINK_FAIL;
1656 netif_carrier_on(vptr->dev);
1658 vptr->mii_status |= VELOCITY_LINK_FAIL;
1659 netif_carrier_off(vptr->dev);
1662 velocity_print_link_status(vptr);
1663 enable_flow_control_ability(vptr);
1666 * Re-enable auto-polling because SRCI will disable
1670 enable_mii_autopoll(regs);
1672 if (vptr->mii_status & VELOCITY_LINK_FAIL)
1673 netif_stop_queue(vptr->dev);
1675 netif_wake_queue(vptr->dev);
1678 if (status & ISR_MIBFI)
1679 velocity_update_hw_mibs(vptr);
1680 if (status & ISR_LSTEI)
1681 mac_rx_queue_wake(vptr->mac_regs);
1685 * velocity_free_tx_buf - free transmit buffer
1689 * Release an transmit buffer. If the buffer was preallocated then
1690 * recycle it, if not then unmap the buffer.
1693 static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_info *tdinfo)
1695 struct sk_buff *skb = tdinfo->skb;
1699 * Don't unmap the pre-allocated tx_bufs
1701 if (tdinfo->skb_dma && (tdinfo->skb_dma[0] != tdinfo->buf_dma)) {
1703 for (i = 0; i < tdinfo->nskb_dma; i++) {
1704 #ifdef VELOCITY_ZERO_COPY_SUPPORT
1705 pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], td->tdesc1.len, PCI_DMA_TODEVICE);
1707 pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], skb->len, PCI_DMA_TODEVICE);
1709 tdinfo->skb_dma[i] = 0;
1712 dev_kfree_skb_irq(skb);
1717 * velocity_open - interface activation callback
1718 * @dev: network layer device to open
1720 * Called when the network layer brings the interface up. Returns
1721 * a negative posix error code on failure, or zero on success.
1723 * All the ring allocation and set up is done on open for this
1724 * adapter to minimise memory usage when inactive
1727 static int velocity_open(struct net_device *dev)
1729 struct velocity_info *vptr = netdev_priv(dev);
1732 vptr->rx_buf_sz = (dev->mtu <= 1504 ? PKT_BUF_SZ : dev->mtu + 32);
1734 ret = velocity_init_rings(vptr);
1738 ret = velocity_init_rd_ring(vptr);
1740 goto err_free_desc_rings;
1742 ret = velocity_init_td_ring(vptr);
1744 goto err_free_rd_ring;
1746 /* Ensure chip is running */
1747 pci_set_power_state(vptr->pdev, PCI_D0);
1749 velocity_init_registers(vptr, VELOCITY_INIT_COLD);
1751 ret = request_irq(vptr->pdev->irq, &velocity_intr, IRQF_SHARED,
1754 /* Power down the chip */
1755 pci_set_power_state(vptr->pdev, PCI_D3hot);
1756 goto err_free_td_ring;
1759 mac_enable_int(vptr->mac_regs);
1760 netif_start_queue(dev);
1761 vptr->flags |= VELOCITY_FLAGS_OPENED;
1766 velocity_free_td_ring(vptr);
1768 velocity_free_rd_ring(vptr);
1769 err_free_desc_rings:
1770 velocity_free_rings(vptr);
1775 * velocity_change_mtu - MTU change callback
1776 * @dev: network device
1777 * @new_mtu: desired MTU
1779 * Handle requests from the networking layer for MTU change on
1780 * this interface. It gets called on a change by the network layer.
1781 * Return zero for success or negative posix error code.
1784 static int velocity_change_mtu(struct net_device *dev, int new_mtu)
1786 struct velocity_info *vptr = netdev_priv(dev);
1787 unsigned long flags;
1788 int oldmtu = dev->mtu;
1791 if ((new_mtu < VELOCITY_MIN_MTU) || new_mtu > (VELOCITY_MAX_MTU)) {
1792 VELOCITY_PRT(MSG_LEVEL_ERR, KERN_NOTICE "%s: Invalid MTU.\n",
1797 if (new_mtu != oldmtu) {
1798 spin_lock_irqsave(&vptr->lock, flags);
1800 netif_stop_queue(dev);
1801 velocity_shutdown(vptr);
1803 velocity_free_td_ring(vptr);
1804 velocity_free_rd_ring(vptr);
1808 vptr->rx_buf_sz = 9 * 1024;
1809 else if (new_mtu > 4096)
1810 vptr->rx_buf_sz = 8192;
1812 vptr->rx_buf_sz = 4 * 1024;
1814 ret = velocity_init_rd_ring(vptr);
1818 ret = velocity_init_td_ring(vptr);
1822 velocity_init_registers(vptr, VELOCITY_INIT_COLD);
1824 mac_enable_int(vptr->mac_regs);
1825 netif_start_queue(dev);
1827 spin_unlock_irqrestore(&vptr->lock, flags);
1834 * velocity_shutdown - shut down the chip
1835 * @vptr: velocity to deactivate
1837 * Shuts down the internal operations of the velocity and
1838 * disables interrupts, autopolling, transmit and receive
1841 static void velocity_shutdown(struct velocity_info *vptr)
1843 struct mac_regs __iomem * regs = vptr->mac_regs;
1844 mac_disable_int(regs);
1845 writel(CR0_STOP, ®s->CR0Set);
1846 writew(0xFFFF, ®s->TDCSRClr);
1847 writeb(0xFF, ®s->RDCSRClr);
1848 safe_disable_mii_autopoll(regs);
1849 mac_clear_isr(regs);
1853 * velocity_close - close adapter callback
1854 * @dev: network device
1856 * Callback from the network layer when the velocity is being
1857 * deactivated by the network layer
1860 static int velocity_close(struct net_device *dev)
1862 struct velocity_info *vptr = netdev_priv(dev);
1864 netif_stop_queue(dev);
1865 velocity_shutdown(vptr);
1867 if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED)
1868 velocity_get_ip(vptr);
1870 free_irq(dev->irq, dev);
1872 /* Power down the chip */
1873 pci_set_power_state(vptr->pdev, PCI_D3hot);
1875 /* Free the resources */
1876 velocity_free_td_ring(vptr);
1877 velocity_free_rd_ring(vptr);
1878 velocity_free_rings(vptr);
1880 vptr->flags &= (~VELOCITY_FLAGS_OPENED);
1885 * velocity_xmit - transmit packet callback
1886 * @skb: buffer to transmit
1887 * @dev: network device
1889 * Called by the networ layer to request a packet is queued to
1890 * the velocity. Returns zero on success.
1893 static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
1895 struct velocity_info *vptr = netdev_priv(dev);
1897 struct tx_desc *td_ptr;
1898 struct velocity_td_info *tdinfo;
1899 unsigned long flags;
1902 int pktlen = skb->len;
1904 #ifdef VELOCITY_ZERO_COPY_SUPPORT
1905 if (skb_shinfo(skb)->nr_frags > 6 && __skb_linearize(skb)) {
1911 spin_lock_irqsave(&vptr->lock, flags);
1913 index = vptr->td_curr[qnum];
1914 td_ptr = &(vptr->td_rings[qnum][index]);
1915 tdinfo = &(vptr->td_infos[qnum][index]);
1917 td_ptr->tdesc1.TCPLS = TCPLS_NORMAL;
1918 td_ptr->tdesc1.TCR = TCR0_TIC;
1919 td_ptr->td_buf[0].queue = 0;
1924 if (pktlen < ETH_ZLEN) {
1925 /* Cannot occur until ZC support */
1927 memcpy(tdinfo->buf, skb->data, skb->len);
1928 memset(tdinfo->buf + skb->len, 0, ETH_ZLEN - skb->len);
1930 tdinfo->skb_dma[0] = tdinfo->buf_dma;
1931 td_ptr->tdesc0.pktsize = pktlen;
1932 td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
1933 td_ptr->td_buf[0].pa_high = 0;
1934 td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;
1935 tdinfo->nskb_dma = 1;
1936 td_ptr->tdesc1.CMDZ = 2;
1938 #ifdef VELOCITY_ZERO_COPY_SUPPORT
1939 if (skb_shinfo(skb)->nr_frags > 0) {
1940 int nfrags = skb_shinfo(skb)->nr_frags;
1943 memcpy(tdinfo->buf, skb->data, skb->len);
1944 tdinfo->skb_dma[0] = tdinfo->buf_dma;
1945 td_ptr->tdesc0.pktsize =
1946 td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
1947 td_ptr->td_buf[0].pa_high = 0;
1948 td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;
1949 tdinfo->nskb_dma = 1;
1950 td_ptr->tdesc1.CMDZ = 2;
1953 tdinfo->nskb_dma = 0;
1954 tdinfo->skb_dma[i] = pci_map_single(vptr->pdev, skb->data, skb->len - skb->data_len, PCI_DMA_TODEVICE);
1956 td_ptr->tdesc0.pktsize = pktlen;
1958 /* FIXME: support 48bit DMA later */
1959 td_ptr->td_buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma);
1960 td_ptr->td_buf[i].pa_high = 0;
1961 td_ptr->td_buf[i].bufsize = skb->len->skb->data_len;
1963 for (i = 0; i < nfrags; i++) {
1964 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
1965 void *addr = ((void *) page_address(frag->page + frag->page_offset));
1967 tdinfo->skb_dma[i + 1] = pci_map_single(vptr->pdev, addr, frag->size, PCI_DMA_TODEVICE);
1969 td_ptr->td_buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]);
1970 td_ptr->td_buf[i + 1].pa_high = 0;
1971 td_ptr->td_buf[i + 1].bufsize = frag->size;
1973 tdinfo->nskb_dma = i - 1;
1974 td_ptr->tdesc1.CMDZ = i;
1981 * Map the linear network buffer into PCI space and
1982 * add it to the transmit ring.
1985 tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE);
1986 td_ptr->tdesc0.pktsize = pktlen;
1987 td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
1988 td_ptr->td_buf[0].pa_high = 0;
1989 td_ptr->td_buf[0].bufsize = td_ptr->tdesc0.pktsize;
1990 tdinfo->nskb_dma = 1;
1991 td_ptr->tdesc1.CMDZ = 2;
1994 if (vptr->flags & VELOCITY_FLAGS_TAGGING) {
1995 td_ptr->tdesc1.pqinf.VID = (vptr->options.vid & 0xfff);
1996 td_ptr->tdesc1.pqinf.priority = 0;
1997 td_ptr->tdesc1.pqinf.CFI = 0;
1998 td_ptr->tdesc1.TCR |= TCR0_VETAG;
2002 * Handle hardware checksum
2004 if ((vptr->flags & VELOCITY_FLAGS_TX_CSUM)
2005 && (skb->ip_summed == CHECKSUM_HW)) {
2006 struct iphdr *ip = skb->nh.iph;
2007 if (ip->protocol == IPPROTO_TCP)
2008 td_ptr->tdesc1.TCR |= TCR0_TCPCK;
2009 else if (ip->protocol == IPPROTO_UDP)
2010 td_ptr->tdesc1.TCR |= (TCR0_UDPCK);
2011 td_ptr->tdesc1.TCR |= TCR0_IPCK;
2015 int prev = index - 1;
2018 prev = vptr->options.numtx - 1;
2019 td_ptr->tdesc0.owner = OWNED_BY_NIC;
2020 vptr->td_used[qnum]++;
2021 vptr->td_curr[qnum] = (index + 1) % vptr->options.numtx;
2023 if (AVAIL_TD(vptr, qnum) < 1)
2024 netif_stop_queue(dev);
2026 td_ptr = &(vptr->td_rings[qnum][prev]);
2027 td_ptr->td_buf[0].queue = 1;
2028 mac_tx_queue_wake(vptr->mac_regs, qnum);
2030 dev->trans_start = jiffies;
2031 spin_unlock_irqrestore(&vptr->lock, flags);
2036 * velocity_intr - interrupt callback
2037 * @irq: interrupt number
2038 * @dev_instance: interrupting device
2039 * @pt_regs: CPU register state at interrupt
2041 * Called whenever an interrupt is generated by the velocity
2042 * adapter IRQ line. We may not be the source of the interrupt
2043 * and need to identify initially if we are, and if not exit as
2044 * efficiently as possible.
2047 static int velocity_intr(int irq, void *dev_instance, struct pt_regs *regs)
2049 struct net_device *dev = dev_instance;
2050 struct velocity_info *vptr = netdev_priv(dev);
2055 spin_lock(&vptr->lock);
2056 isr_status = mac_read_isr(vptr->mac_regs);
2059 if (isr_status == 0) {
2060 spin_unlock(&vptr->lock);
2064 mac_disable_int(vptr->mac_regs);
2067 * Keep processing the ISR until we have completed
2068 * processing and the isr_status becomes zero
2071 while (isr_status != 0) {
2072 mac_write_isr(vptr->mac_regs, isr_status);
2073 if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
2074 velocity_error(vptr, isr_status);
2075 if (isr_status & (ISR_PRXI | ISR_PPRXI))
2076 max_count += velocity_rx_srv(vptr, isr_status);
2077 if (isr_status & (ISR_PTXI | ISR_PPTXI))
2078 max_count += velocity_tx_srv(vptr, isr_status);
2079 isr_status = mac_read_isr(vptr->mac_regs);
2080 if (max_count > vptr->options.int_works)
2082 printk(KERN_WARNING "%s: excessive work at interrupt.\n",
2087 spin_unlock(&vptr->lock);
2088 mac_enable_int(vptr->mac_regs);
2095 * velocity_set_multi - filter list change callback
2096 * @dev: network device
2098 * Called by the network layer when the filter lists need to change
2099 * for a velocity adapter. Reload the CAMs with the new address
2103 static void velocity_set_multi(struct net_device *dev)
2105 struct velocity_info *vptr = netdev_priv(dev);
2106 struct mac_regs __iomem * regs = vptr->mac_regs;
2109 struct dev_mc_list *mclist;
2111 if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
2112 /* Unconditionally log net taps. */
2113 printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name);
2114 writel(0xffffffff, ®s->MARCAM[0]);
2115 writel(0xffffffff, ®s->MARCAM[4]);
2116 rx_mode = (RCR_AM | RCR_AB | RCR_PROM);
2117 } else if ((dev->mc_count > vptr->multicast_limit)
2118 || (dev->flags & IFF_ALLMULTI)) {
2119 writel(0xffffffff, ®s->MARCAM[0]);
2120 writel(0xffffffff, ®s->MARCAM[4]);
2121 rx_mode = (RCR_AM | RCR_AB);
2123 int offset = MCAM_SIZE - vptr->multicast_limit;
2124 mac_get_cam_mask(regs, vptr->mCAMmask, VELOCITY_MULTICAST_CAM);
2126 for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) {
2127 mac_set_cam(regs, i + offset, mclist->dmi_addr, VELOCITY_MULTICAST_CAM);
2128 vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7);
2131 mac_set_cam_mask(regs, vptr->mCAMmask, VELOCITY_MULTICAST_CAM);
2132 rx_mode = (RCR_AM | RCR_AB);
2134 if (dev->mtu > 1500)
2137 BYTE_REG_BITS_ON(rx_mode, ®s->RCR);
2142 * velocity_get_status - statistics callback
2143 * @dev: network device
2145 * Callback from the network layer to allow driver statistics
2146 * to be resynchronized with hardware collected state. In the
2147 * case of the velocity we need to pull the MIB counters from
2148 * the hardware into the counters before letting the network
2149 * layer display them.
2152 static struct net_device_stats *velocity_get_stats(struct net_device *dev)
2154 struct velocity_info *vptr = netdev_priv(dev);
2156 /* If the hardware is down, don't touch MII */
2157 if(!netif_running(dev))
2158 return &vptr->stats;
2160 spin_lock_irq(&vptr->lock);
2161 velocity_update_hw_mibs(vptr);
2162 spin_unlock_irq(&vptr->lock);
2164 vptr->stats.rx_packets = vptr->mib_counter[HW_MIB_ifRxAllPkts];
2165 vptr->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts];
2166 vptr->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors];
2168 // unsigned long rx_dropped; /* no space in linux buffers */
2169 vptr->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions];
2170 /* detailed rx_errors: */
2171 // unsigned long rx_length_errors;
2172 // unsigned long rx_over_errors; /* receiver ring buff overflow */
2173 vptr->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE];
2174 // unsigned long rx_frame_errors; /* recv'd frame alignment error */
2175 // unsigned long rx_fifo_errors; /* recv'r fifo overrun */
2176 // unsigned long rx_missed_errors; /* receiver missed packet */
2178 /* detailed tx_errors */
2179 // unsigned long tx_fifo_errors;
2181 return &vptr->stats;
2186 * velocity_ioctl - ioctl entry point
2187 * @dev: network device
2188 * @rq: interface request ioctl
2189 * @cmd: command code
2191 * Called when the user issues an ioctl request to the network
2192 * device in question. The velocity interface supports MII.
2195 static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2197 struct velocity_info *vptr = netdev_priv(dev);
2200 /* If we are asked for information and the device is power
2201 saving then we need to bring the device back up to talk to it */
2203 if (!netif_running(dev))
2204 pci_set_power_state(vptr->pdev, PCI_D0);
2207 case SIOCGMIIPHY: /* Get address of MII PHY in use. */
2208 case SIOCGMIIREG: /* Read MII PHY register. */
2209 case SIOCSMIIREG: /* Write to MII PHY register. */
2210 ret = velocity_mii_ioctl(dev, rq, cmd);
2216 if (!netif_running(dev))
2217 pci_set_power_state(vptr->pdev, PCI_D3hot);
2224 * Definition for our device driver. The PCI layer interface
2225 * uses this to handle all our card discover and plugging
2228 static struct pci_driver velocity_driver = {
2229 .name = VELOCITY_NAME,
2230 .id_table = velocity_id_table,
2231 .probe = velocity_found1,
2232 .remove = __devexit_p(velocity_remove1),
2234 .suspend = velocity_suspend,
2235 .resume = velocity_resume,
2240 * velocity_init_module - load time function
2242 * Called when the velocity module is loaded. The PCI driver
2243 * is registered with the PCI layer, and in turn will call
2244 * the probe functions for each velocity adapter installed
2248 static int __init velocity_init_module(void)
2252 velocity_register_notifier();
2253 ret = pci_module_init(&velocity_driver);
2255 velocity_unregister_notifier();
2260 * velocity_cleanup - module unload
2262 * When the velocity hardware is unloaded this function is called.
2263 * It will clean up the notifiers and the unregister the PCI
2264 * driver interface for this hardware. This in turn cleans up
2265 * all discovered interfaces before returning from the function
2268 static void __exit velocity_cleanup_module(void)
2270 velocity_unregister_notifier();
2271 pci_unregister_driver(&velocity_driver);
2274 module_init(velocity_init_module);
2275 module_exit(velocity_cleanup_module);
2279 * MII access , media link mode setting functions
2284 * mii_init - set up MII
2285 * @vptr: velocity adapter
2286 * @mii_status: links tatus
2288 * Set up the PHY for the current link state.
2291 static void mii_init(struct velocity_info *vptr, u32 mii_status)
2295 switch (PHYID_GET_PHY_ID(vptr->phy_id)) {
2296 case PHYID_CICADA_CS8201:
2298 * Reset to hardware default
2300 MII_REG_BITS_OFF((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
2302 * Turn on ECHODIS bit in NWay-forced full mode and turn it
2303 * off it in NWay-forced half mode for NWay-forced v.s.
2304 * legacy-forced issue.
2306 if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
2307 MII_REG_BITS_ON(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
2309 MII_REG_BITS_OFF(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
2311 * Turn on Link/Activity LED enable bit for CIS8201
2313 MII_REG_BITS_ON(PLED_LALBE, MII_REG_PLED, vptr->mac_regs);
2315 case PHYID_VT3216_32BIT:
2316 case PHYID_VT3216_64BIT:
2318 * Reset to hardware default
2320 MII_REG_BITS_ON((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
2322 * Turn on ECHODIS bit in NWay-forced full mode and turn it
2323 * off it in NWay-forced half mode for NWay-forced v.s.
2324 * legacy-forced issue
2326 if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
2327 MII_REG_BITS_ON(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
2329 MII_REG_BITS_OFF(TCSR_ECHODIS, MII_REG_TCSR, vptr->mac_regs);
2332 case PHYID_MARVELL_1000:
2333 case PHYID_MARVELL_1000S:
2335 * Assert CRS on Transmit
2337 MII_REG_BITS_ON(PSCR_ACRSTX, MII_REG_PSCR, vptr->mac_regs);
2339 * Reset to hardware default
2341 MII_REG_BITS_ON((ANAR_ASMDIR | ANAR_PAUSE), MII_REG_ANAR, vptr->mac_regs);
2346 velocity_mii_read(vptr->mac_regs, MII_REG_BMCR, &BMCR);
2347 if (BMCR & BMCR_ISO) {
2349 velocity_mii_write(vptr->mac_regs, MII_REG_BMCR, BMCR);
2354 * safe_disable_mii_autopoll - autopoll off
2355 * @regs: velocity registers
2357 * Turn off the autopoll and wait for it to disable on the chip
2360 static void safe_disable_mii_autopoll(struct mac_regs __iomem * regs)
2364 /* turn off MAUTO */
2365 writeb(0, ®s->MIICR);
2366 for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
2368 if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR))
2374 * enable_mii_autopoll - turn on autopolling
2375 * @regs: velocity registers
2377 * Enable the MII link status autopoll feature on the Velocity
2378 * hardware. Wait for it to enable.
2381 static void enable_mii_autopoll(struct mac_regs __iomem * regs)
2385 writeb(0, &(regs->MIICR));
2386 writeb(MIIADR_SWMPL, ®s->MIIADR);
2388 for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
2390 if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR))
2394 writeb(MIICR_MAUTO, ®s->MIICR);
2396 for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
2398 if (!BYTE_REG_BITS_IS_ON(MIISR_MIDLE, ®s->MIISR))
2405 * velocity_mii_read - read MII data
2406 * @regs: velocity registers
2407 * @index: MII register index
2408 * @data: buffer for received data
2410 * Perform a single read of an MII 16bit register. Returns zero
2411 * on success or -ETIMEDOUT if the PHY did not respond.
2414 static int velocity_mii_read(struct mac_regs __iomem *regs, u8 index, u16 *data)
2419 * Disable MIICR_MAUTO, so that mii addr can be set normally
2421 safe_disable_mii_autopoll(regs);
2423 writeb(index, ®s->MIIADR);
2425 BYTE_REG_BITS_ON(MIICR_RCMD, ®s->MIICR);
2427 for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
2428 if (!(readb(®s->MIICR) & MIICR_RCMD))
2432 *data = readw(®s->MIIDATA);
2434 enable_mii_autopoll(regs);
2435 if (ww == W_MAX_TIMEOUT)
2441 * velocity_mii_write - write MII data
2442 * @regs: velocity registers
2443 * @index: MII register index
2444 * @data: 16bit data for the MII register
2446 * Perform a single write to an MII 16bit register. Returns zero
2447 * on success or -ETIMEDOUT if the PHY did not respond.
2450 static int velocity_mii_write(struct mac_regs __iomem *regs, u8 mii_addr, u16 data)
2455 * Disable MIICR_MAUTO, so that mii addr can be set normally
2457 safe_disable_mii_autopoll(regs);
2459 /* MII reg offset */
2460 writeb(mii_addr, ®s->MIIADR);
2462 writew(data, ®s->MIIDATA);
2464 /* turn on MIICR_WCMD */
2465 BYTE_REG_BITS_ON(MIICR_WCMD, ®s->MIICR);
2467 /* W_MAX_TIMEOUT is the timeout period */
2468 for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
2470 if (!(readb(®s->MIICR) & MIICR_WCMD))
2473 enable_mii_autopoll(regs);
2475 if (ww == W_MAX_TIMEOUT)
2481 * velocity_get_opt_media_mode - get media selection
2482 * @vptr: velocity adapter
2484 * Get the media mode stored in EEPROM or module options and load
2485 * mii_status accordingly. The requested link state information
2489 static u32 velocity_get_opt_media_mode(struct velocity_info *vptr)
2493 switch (vptr->options.spd_dpx) {
2495 status = VELOCITY_AUTONEG_ENABLE;
2497 case SPD_DPX_100_FULL:
2498 status = VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL;
2500 case SPD_DPX_10_FULL:
2501 status = VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL;
2503 case SPD_DPX_100_HALF:
2504 status = VELOCITY_SPEED_100;
2506 case SPD_DPX_10_HALF:
2507 status = VELOCITY_SPEED_10;
2510 vptr->mii_status = status;
2515 * mii_set_auto_on - autonegotiate on
2518 * Enable autonegotation on this interface
2521 static void mii_set_auto_on(struct velocity_info *vptr)
2523 if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs))
2524 MII_REG_BITS_ON(BMCR_REAUTO, MII_REG_BMCR, vptr->mac_regs);
2526 MII_REG_BITS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs);
2531 static void mii_set_auto_off(struct velocity_info * vptr)
2533 MII_REG_BITS_OFF(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs);
2538 * set_mii_flow_control - flow control setup
2539 * @vptr: velocity interface
2541 * Set up the flow control on this interface according to
2542 * the supplied user/eeprom options.
2545 static void set_mii_flow_control(struct velocity_info *vptr)
2547 /*Enable or Disable PAUSE in ANAR */
2548 switch (vptr->options.flow_cntl) {
2550 MII_REG_BITS_OFF(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
2551 MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
2555 MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
2556 MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
2559 case FLOW_CNTL_TX_RX:
2560 MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
2561 MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
2564 case FLOW_CNTL_DISABLE:
2565 MII_REG_BITS_OFF(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
2566 MII_REG_BITS_OFF(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
2574 * velocity_set_media_mode - set media mode
2575 * @mii_status: old MII link state
2577 * Check the media link state and configure the flow control
2578 * PHY and also velocity hardware setup accordingly. In particular
2579 * we need to set up CD polling and frame bursting.
2582 static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
2585 struct mac_regs __iomem * regs = vptr->mac_regs;
2587 vptr->mii_status = mii_check_media_mode(vptr->mac_regs);
2588 curr_status = vptr->mii_status & (~VELOCITY_LINK_FAIL);
2590 /* Set mii link status */
2591 set_mii_flow_control(vptr);
2594 Check if new status is consisent with current status
2595 if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE)
2596 || (mii_status==curr_status)) {
2597 vptr->mii_status=mii_check_media_mode(vptr->mac_regs);
2598 vptr->mii_status=check_connection_type(vptr->mac_regs);
2599 VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity link no change\n");
2604 if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201) {
2605 MII_REG_BITS_ON(AUXCR_MDPPS, MII_REG_AUXCR, vptr->mac_regs);
2609 * If connection type is AUTO
2611 if (mii_status & VELOCITY_AUTONEG_ENABLE) {
2612 VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity is AUTO mode\n");
2613 /* clear force MAC mode bit */
2614 BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, ®s->CHIPGCR);
2615 /* set duplex mode of MAC according to duplex mode of MII */
2616 MII_REG_BITS_ON(ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10, MII_REG_ANAR, vptr->mac_regs);
2617 MII_REG_BITS_ON(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
2618 MII_REG_BITS_ON(BMCR_SPEED1G, MII_REG_BMCR, vptr->mac_regs);
2620 /* enable AUTO-NEGO mode */
2621 mii_set_auto_on(vptr);
2627 * 1. if it's 3119, disable frame bursting in halfduplex mode
2628 * and enable it in fullduplex mode
2629 * 2. set correct MII/GMII and half/full duplex mode in CHIPGCR
2630 * 3. only enable CD heart beat counter in 10HD mode
2633 /* set force MAC mode bit */
2634 BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR);
2636 CHIPGCR = readb(®s->CHIPGCR);
2637 CHIPGCR &= ~CHIPGCR_FCGMII;
2639 if (mii_status & VELOCITY_DUPLEX_FULL) {
2640 CHIPGCR |= CHIPGCR_FCFDX;
2641 writeb(CHIPGCR, ®s->CHIPGCR);
2642 VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced full mode\n");
2643 if (vptr->rev_id < REV_ID_VT3216_A0)
2644 BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR);
2646 CHIPGCR &= ~CHIPGCR_FCFDX;
2647 VELOCITY_PRT(MSG_LEVEL_INFO, "set Velocity to forced half mode\n");
2648 writeb(CHIPGCR, ®s->CHIPGCR);
2649 if (vptr->rev_id < REV_ID_VT3216_A0)
2650 BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR);
2653 MII_REG_BITS_OFF(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
2655 if (!(mii_status & VELOCITY_DUPLEX_FULL) && (mii_status & VELOCITY_SPEED_10)) {
2656 BYTE_REG_BITS_OFF(TESTCFG_HBDIS, ®s->TESTCFG);
2658 BYTE_REG_BITS_ON(TESTCFG_HBDIS, ®s->TESTCFG);
2660 /* MII_REG_BITS_OFF(BMCR_SPEED1G, MII_REG_BMCR, vptr->mac_regs); */
2661 velocity_mii_read(vptr->mac_regs, MII_REG_ANAR, &ANAR);
2662 ANAR &= (~(ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10));
2663 if (mii_status & VELOCITY_SPEED_100) {
2664 if (mii_status & VELOCITY_DUPLEX_FULL)
2669 if (mii_status & VELOCITY_DUPLEX_FULL)
2674 velocity_mii_write(vptr->mac_regs, MII_REG_ANAR, ANAR);
2675 /* enable AUTO-NEGO mode */
2676 mii_set_auto_on(vptr);
2677 /* MII_REG_BITS_ON(BMCR_AUTO, MII_REG_BMCR, vptr->mac_regs); */
2679 /* vptr->mii_status=mii_check_media_mode(vptr->mac_regs); */
2680 /* vptr->mii_status=check_connection_type(vptr->mac_regs); */
2681 return VELOCITY_LINK_CHANGE;
2685 * mii_check_media_mode - check media state
2686 * @regs: velocity registers
2688 * Check the current MII status and determine the link status
2692 static u32 mii_check_media_mode(struct mac_regs __iomem * regs)
2697 if (!MII_REG_BITS_IS_ON(BMSR_LNK, MII_REG_BMSR, regs))
2698 status |= VELOCITY_LINK_FAIL;
2700 if (MII_REG_BITS_IS_ON(G1000CR_1000FD, MII_REG_G1000CR, regs))
2701 status |= VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL;
2702 else if (MII_REG_BITS_IS_ON(G1000CR_1000, MII_REG_G1000CR, regs))
2703 status |= (VELOCITY_SPEED_1000);
2705 velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
2706 if (ANAR & ANAR_TXFD)
2707 status |= (VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL);
2708 else if (ANAR & ANAR_TX)
2709 status |= VELOCITY_SPEED_100;
2710 else if (ANAR & ANAR_10FD)
2711 status |= (VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL);
2713 status |= (VELOCITY_SPEED_10);
2716 if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, regs)) {
2717 velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
2718 if ((ANAR & (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10))
2719 == (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) {
2720 if (MII_REG_BITS_IS_ON(G1000CR_1000 | G1000CR_1000FD, MII_REG_G1000CR, regs))
2721 status |= VELOCITY_AUTONEG_ENABLE;
2728 static u32 check_connection_type(struct mac_regs __iomem * regs)
2733 PHYSR0 = readb(®s->PHYSR0);
2736 if (!(PHYSR0 & PHYSR0_LINKGD))
2737 status|=VELOCITY_LINK_FAIL;
2740 if (PHYSR0 & PHYSR0_FDPX)
2741 status |= VELOCITY_DUPLEX_FULL;
2743 if (PHYSR0 & PHYSR0_SPDG)
2744 status |= VELOCITY_SPEED_1000;
2745 else if (PHYSR0 & PHYSR0_SPD10)
2746 status |= VELOCITY_SPEED_10;
2748 status |= VELOCITY_SPEED_100;
2750 if (MII_REG_BITS_IS_ON(BMCR_AUTO, MII_REG_BMCR, regs)) {
2751 velocity_mii_read(regs, MII_REG_ANAR, &ANAR);
2752 if ((ANAR & (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10))
2753 == (ANAR_TXFD | ANAR_TX | ANAR_10FD | ANAR_10)) {
2754 if (MII_REG_BITS_IS_ON(G1000CR_1000 | G1000CR_1000FD, MII_REG_G1000CR, regs))
2755 status |= VELOCITY_AUTONEG_ENABLE;
2763 * enable_flow_control_ability - flow control
2764 * @vptr: veloity to configure
2766 * Set up flow control according to the flow control options
2767 * determined by the eeprom/configuration.
2770 static void enable_flow_control_ability(struct velocity_info *vptr)
2773 struct mac_regs __iomem * regs = vptr->mac_regs;
2775 switch (vptr->options.flow_cntl) {
2777 case FLOW_CNTL_DEFAULT:
2778 if (BYTE_REG_BITS_IS_ON(PHYSR0_RXFLC, ®s->PHYSR0))
2779 writel(CR0_FDXRFCEN, ®s->CR0Set);
2781 writel(CR0_FDXRFCEN, ®s->CR0Clr);
2783 if (BYTE_REG_BITS_IS_ON(PHYSR0_TXFLC, ®s->PHYSR0))
2784 writel(CR0_FDXTFCEN, ®s->CR0Set);
2786 writel(CR0_FDXTFCEN, ®s->CR0Clr);
2790 writel(CR0_FDXTFCEN, ®s->CR0Set);
2791 writel(CR0_FDXRFCEN, ®s->CR0Clr);
2795 writel(CR0_FDXRFCEN, ®s->CR0Set);
2796 writel(CR0_FDXTFCEN, ®s->CR0Clr);
2799 case FLOW_CNTL_TX_RX:
2800 writel(CR0_FDXTFCEN, ®s->CR0Set);
2801 writel(CR0_FDXRFCEN, ®s->CR0Set);
2804 case FLOW_CNTL_DISABLE:
2805 writel(CR0_FDXRFCEN, ®s->CR0Clr);
2806 writel(CR0_FDXTFCEN, ®s->CR0Clr);
2817 * velocity_ethtool_up - pre hook for ethtool
2818 * @dev: network device
2820 * Called before an ethtool operation. We need to make sure the
2821 * chip is out of D3 state before we poke at it.
2824 static int velocity_ethtool_up(struct net_device *dev)
2826 struct velocity_info *vptr = netdev_priv(dev);
2827 if (!netif_running(dev))
2828 pci_set_power_state(vptr->pdev, PCI_D0);
2833 * velocity_ethtool_down - post hook for ethtool
2834 * @dev: network device
2836 * Called after an ethtool operation. Restore the chip back to D3
2837 * state if it isn't running.
2840 static void velocity_ethtool_down(struct net_device *dev)
2842 struct velocity_info *vptr = netdev_priv(dev);
2843 if (!netif_running(dev))
2844 pci_set_power_state(vptr->pdev, PCI_D3hot);
2847 static int velocity_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
2849 struct velocity_info *vptr = netdev_priv(dev);
2850 struct mac_regs __iomem * regs = vptr->mac_regs;
2852 status = check_connection_type(vptr->mac_regs);
2854 cmd->supported = SUPPORTED_TP |
2856 SUPPORTED_10baseT_Half |
2857 SUPPORTED_10baseT_Full |
2858 SUPPORTED_100baseT_Half |
2859 SUPPORTED_100baseT_Full |
2860 SUPPORTED_1000baseT_Half |
2861 SUPPORTED_1000baseT_Full;
2862 if (status & VELOCITY_SPEED_1000)
2863 cmd->speed = SPEED_1000;
2864 else if (status & VELOCITY_SPEED_100)
2865 cmd->speed = SPEED_100;
2867 cmd->speed = SPEED_10;
2868 cmd->autoneg = (status & VELOCITY_AUTONEG_ENABLE) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
2869 cmd->port = PORT_TP;
2870 cmd->transceiver = XCVR_INTERNAL;
2871 cmd->phy_address = readb(®s->MIIADR) & 0x1F;
2873 if (status & VELOCITY_DUPLEX_FULL)
2874 cmd->duplex = DUPLEX_FULL;
2876 cmd->duplex = DUPLEX_HALF;
2881 static int velocity_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
2883 struct velocity_info *vptr = netdev_priv(dev);
2888 curr_status = check_connection_type(vptr->mac_regs);
2889 curr_status &= (~VELOCITY_LINK_FAIL);
2891 new_status |= ((cmd->autoneg) ? VELOCITY_AUTONEG_ENABLE : 0);
2892 new_status |= ((cmd->speed == SPEED_100) ? VELOCITY_SPEED_100 : 0);
2893 new_status |= ((cmd->speed == SPEED_10) ? VELOCITY_SPEED_10 : 0);
2894 new_status |= ((cmd->duplex == DUPLEX_FULL) ? VELOCITY_DUPLEX_FULL : 0);
2896 if ((new_status & VELOCITY_AUTONEG_ENABLE) && (new_status != (curr_status | VELOCITY_AUTONEG_ENABLE)))
2899 velocity_set_media_mode(vptr, new_status);
2904 static u32 velocity_get_link(struct net_device *dev)
2906 struct velocity_info *vptr = netdev_priv(dev);
2907 struct mac_regs __iomem * regs = vptr->mac_regs;
2908 return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, ®s->PHYSR0) ? 1 : 0;
2911 static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
2913 struct velocity_info *vptr = netdev_priv(dev);
2914 strcpy(info->driver, VELOCITY_NAME);
2915 strcpy(info->version, VELOCITY_VERSION);
2916 strcpy(info->bus_info, pci_name(vptr->pdev));
2919 static void velocity_ethtool_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2921 struct velocity_info *vptr = netdev_priv(dev);
2922 wol->supported = WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP;
2923 wol->wolopts |= WAKE_MAGIC;
2925 if (vptr->wol_opts & VELOCITY_WOL_PHY)
2926 wol.wolopts|=WAKE_PHY;
2928 if (vptr->wol_opts & VELOCITY_WOL_UCAST)
2929 wol->wolopts |= WAKE_UCAST;
2930 if (vptr->wol_opts & VELOCITY_WOL_ARP)
2931 wol->wolopts |= WAKE_ARP;
2932 memcpy(&wol->sopass, vptr->wol_passwd, 6);
2935 static int velocity_ethtool_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2937 struct velocity_info *vptr = netdev_priv(dev);
2939 if (!(wol->wolopts & (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP)))
2941 vptr->wol_opts = VELOCITY_WOL_MAGIC;
2944 if (wol.wolopts & WAKE_PHY) {
2945 vptr->wol_opts|=VELOCITY_WOL_PHY;
2946 vptr->flags |=VELOCITY_FLAGS_WOL_ENABLED;
2950 if (wol->wolopts & WAKE_MAGIC) {
2951 vptr->wol_opts |= VELOCITY_WOL_MAGIC;
2952 vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
2954 if (wol->wolopts & WAKE_UCAST) {
2955 vptr->wol_opts |= VELOCITY_WOL_UCAST;
2956 vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
2958 if (wol->wolopts & WAKE_ARP) {
2959 vptr->wol_opts |= VELOCITY_WOL_ARP;
2960 vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
2962 memcpy(vptr->wol_passwd, wol->sopass, 6);
2966 static u32 velocity_get_msglevel(struct net_device *dev)
2971 static void velocity_set_msglevel(struct net_device *dev, u32 value)
2976 static struct ethtool_ops velocity_ethtool_ops = {
2977 .get_settings = velocity_get_settings,
2978 .set_settings = velocity_set_settings,
2979 .get_drvinfo = velocity_get_drvinfo,
2980 .get_wol = velocity_ethtool_get_wol,
2981 .set_wol = velocity_ethtool_set_wol,
2982 .get_msglevel = velocity_get_msglevel,
2983 .set_msglevel = velocity_set_msglevel,
2984 .get_link = velocity_get_link,
2985 .begin = velocity_ethtool_up,
2986 .complete = velocity_ethtool_down
2990 * velocity_mii_ioctl - MII ioctl handler
2991 * @dev: network device
2992 * @ifr: the ifreq block for the ioctl
2995 * Process MII requests made via ioctl from the network layer. These
2996 * are used by tools like kudzu to interrogate the link state of the
3000 static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
3002 struct velocity_info *vptr = netdev_priv(dev);
3003 struct mac_regs __iomem * regs = vptr->mac_regs;
3004 unsigned long flags;
3005 struct mii_ioctl_data *miidata = if_mii(ifr);
3010 miidata->phy_id = readb(®s->MIIADR) & 0x1f;
3013 if (!capable(CAP_NET_ADMIN))
3015 if(velocity_mii_read(vptr->mac_regs, miidata->reg_num & 0x1f, &(miidata->val_out)) < 0)
3019 if (!capable(CAP_NET_ADMIN))
3021 spin_lock_irqsave(&vptr->lock, flags);
3022 err = velocity_mii_write(vptr->mac_regs, miidata->reg_num & 0x1f, miidata->val_in);
3023 spin_unlock_irqrestore(&vptr->lock, flags);
3024 check_connection_type(vptr->mac_regs);
3037 * velocity_save_context - save registers
3039 * @context: buffer for stored context
3041 * Retrieve the current configuration from the velocity hardware
3042 * and stash it in the context structure, for use by the context
3043 * restore functions. This allows us to save things we need across
3047 static void velocity_save_context(struct velocity_info *vptr, struct velocity_context * context)
3049 struct mac_regs __iomem * regs = vptr->mac_regs;
3051 u8 __iomem *ptr = (u8 __iomem *)regs;
3053 for (i = MAC_REG_PAR; i < MAC_REG_CR0_CLR; i += 4)
3054 *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
3056 for (i = MAC_REG_MAR; i < MAC_REG_TDCSR_CLR; i += 4)
3057 *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
3059 for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4)
3060 *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
3065 * velocity_restore_context - restore registers
3067 * @context: buffer for stored context
3069 * Reload the register configuration from the velocity context
3070 * created by velocity_save_context.
3073 static void velocity_restore_context(struct velocity_info *vptr, struct velocity_context *context)
3075 struct mac_regs __iomem * regs = vptr->mac_regs;
3077 u8 __iomem *ptr = (u8 __iomem *)regs;
3079 for (i = MAC_REG_PAR; i < MAC_REG_CR0_SET; i += 4) {
3080 writel(*((u32 *) (context->mac_reg + i)), ptr + i);
3084 for (i = MAC_REG_CR1_SET; i < MAC_REG_CR0_CLR; i++) {
3086 writeb(~(*((u8 *) (context->mac_reg + i))), ptr + i + 4);
3088 writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
3091 for (i = MAC_REG_MAR; i < MAC_REG_IMR; i += 4) {
3092 writel(*((u32 *) (context->mac_reg + i)), ptr + i);
3095 for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4) {
3096 writel(*((u32 *) (context->mac_reg + i)), ptr + i);
3099 for (i = MAC_REG_TDCSR_SET; i <= MAC_REG_RDCSR_SET; i++) {
3100 writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
3106 * wol_calc_crc - WOL CRC
3107 * @pattern: data pattern
3108 * @mask_pattern: mask
3110 * Compute the wake on lan crc hashes for the packet header
3111 * we are interested in.
3114 static u16 wol_calc_crc(int size, u8 * pattern, u8 *mask_pattern)
3120 for (i = 0; i < size; i++) {
3121 mask = mask_pattern[i];
3123 /* Skip this loop if the mask equals to zero */
3127 for (j = 0; j < 8; j++) {
3128 if ((mask & 0x01) == 0) {
3133 crc = crc_ccitt(crc, &(pattern[i * 8 + j]), 1);
3136 /* Finally, invert the result once to get the correct data */
3138 return bitreverse(crc) >> 16;
3142 * velocity_set_wol - set up for wake on lan
3143 * @vptr: velocity to set WOL status on
3145 * Set a card up for wake on lan either by unicast or by
3148 * FIXME: check static buffer is safe here
3151 static int velocity_set_wol(struct velocity_info *vptr)
3153 struct mac_regs __iomem * regs = vptr->mac_regs;
3157 static u32 mask_pattern[2][4] = {
3158 {0x00203000, 0x000003C0, 0x00000000, 0x0000000}, /* ARP */
3159 {0xfffff000, 0xffffffff, 0xffffffff, 0x000ffff} /* Magic Packet */
3162 writew(0xFFFF, ®s->WOLCRClr);
3163 writeb(WOLCFG_SAB | WOLCFG_SAM, ®s->WOLCFGSet);
3164 writew(WOLCR_MAGIC_EN, ®s->WOLCRSet);
3167 if (vptr->wol_opts & VELOCITY_WOL_PHY)
3168 writew((WOLCR_LINKON_EN|WOLCR_LINKOFF_EN), ®s->WOLCRSet);
3171 if (vptr->wol_opts & VELOCITY_WOL_UCAST) {
3172 writew(WOLCR_UNICAST_EN, ®s->WOLCRSet);
3175 if (vptr->wol_opts & VELOCITY_WOL_ARP) {
3176 struct arp_packet *arp = (struct arp_packet *) buf;
3178 memset(buf, 0, sizeof(struct arp_packet) + 7);
3180 for (i = 0; i < 4; i++)
3181 writel(mask_pattern[0][i], ®s->ByteMask[0][i]);
3183 arp->type = htons(ETH_P_ARP);
3184 arp->ar_op = htons(1);
3186 memcpy(arp->ar_tip, vptr->ip_addr, 4);
3188 crc = wol_calc_crc((sizeof(struct arp_packet) + 7) / 8, buf,
3189 (u8 *) & mask_pattern[0][0]);
3191 writew(crc, ®s->PatternCRC[0]);
3192 writew(WOLCR_ARP_EN, ®s->WOLCRSet);
3195 BYTE_REG_BITS_ON(PWCFG_WOLTYPE, ®s->PWCFGSet);
3196 BYTE_REG_BITS_ON(PWCFG_LEGACY_WOLEN, ®s->PWCFGSet);
3198 writew(0x0FFF, ®s->WOLSRClr);
3200 if (vptr->mii_status & VELOCITY_AUTONEG_ENABLE) {
3201 if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
3202 MII_REG_BITS_ON(AUXCR_MDPPS, MII_REG_AUXCR, vptr->mac_regs);
3204 MII_REG_BITS_OFF(G1000CR_1000FD | G1000CR_1000, MII_REG_G1000CR, vptr->mac_regs);
3207 if (vptr->mii_status & VELOCITY_SPEED_1000)
3208 MII_REG_BITS_ON(BMCR_REAUTO, MII_REG_BMCR, vptr->mac_regs);
3210 BYTE_REG_BITS_ON(CHIPGCR_FCMODE, ®s->CHIPGCR);
3214 GCR = readb(®s->CHIPGCR);
3215 GCR = (GCR & ~CHIPGCR_FCGMII) | CHIPGCR_FCFDX;
3216 writeb(GCR, ®s->CHIPGCR);
3219 BYTE_REG_BITS_OFF(ISR_PWEI, ®s->ISR);
3220 /* Turn on SWPTAG just before entering power mode */
3221 BYTE_REG_BITS_ON(STICKHW_SWPTAG, ®s->STICKHW);
3222 /* Go to bed ..... */
3223 BYTE_REG_BITS_ON((STICKHW_DS1 | STICKHW_DS0), ®s->STICKHW);
3228 static int velocity_suspend(struct pci_dev *pdev, pm_message_t state)
3230 struct net_device *dev = pci_get_drvdata(pdev);
3231 struct velocity_info *vptr = netdev_priv(dev);
3232 unsigned long flags;
3234 if(!netif_running(vptr->dev))
3237 netif_device_detach(vptr->dev);
3239 spin_lock_irqsave(&vptr->lock, flags);
3240 pci_save_state(pdev);
3242 if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) {
3243 velocity_get_ip(vptr);
3244 velocity_save_context(vptr, &vptr->context);
3245 velocity_shutdown(vptr);
3246 velocity_set_wol(vptr);
3247 pci_enable_wake(pdev, 3, 1);
3248 pci_set_power_state(pdev, PCI_D3hot);
3250 velocity_save_context(vptr, &vptr->context);
3251 velocity_shutdown(vptr);
3252 pci_disable_device(pdev);
3253 pci_set_power_state(pdev, pci_choose_state(pdev, state));
3256 pci_set_power_state(pdev, pci_choose_state(pdev, state));
3258 spin_unlock_irqrestore(&vptr->lock, flags);
3262 static int velocity_resume(struct pci_dev *pdev)
3264 struct net_device *dev = pci_get_drvdata(pdev);
3265 struct velocity_info *vptr = netdev_priv(dev);
3266 unsigned long flags;
3269 if(!netif_running(vptr->dev))
3272 pci_set_power_state(pdev, PCI_D0);
3273 pci_enable_wake(pdev, 0, 0);
3274 pci_restore_state(pdev);
3276 mac_wol_reset(vptr->mac_regs);
3278 spin_lock_irqsave(&vptr->lock, flags);
3279 velocity_restore_context(vptr, &vptr->context);
3280 velocity_init_registers(vptr, VELOCITY_INIT_WOL);
3281 mac_disable_int(vptr->mac_regs);
3283 velocity_tx_srv(vptr, 0);
3285 for (i = 0; i < vptr->num_txq; i++) {
3286 if (vptr->td_used[i]) {
3287 mac_tx_queue_wake(vptr->mac_regs, i);
3291 mac_enable_int(vptr->mac_regs);
3292 spin_unlock_irqrestore(&vptr->lock, flags);
3293 netif_device_attach(vptr->dev);
3298 static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr)
3300 struct in_ifaddr *ifa = (struct in_ifaddr *) ptr;
3303 struct net_device *dev = ifa->ifa_dev->dev;
3304 struct velocity_info *vptr;
3305 unsigned long flags;
3307 spin_lock_irqsave(&velocity_dev_list_lock, flags);
3308 list_for_each_entry(vptr, &velocity_dev_list, list) {
3309 if (vptr->dev == dev) {
3310 velocity_get_ip(vptr);
3314 spin_unlock_irqrestore(&velocity_dev_list_lock, flags);