2 * Copyright (C) 2000, 2005 MIPS Technologies, Inc. All rights reserved.
3 * Authors: Carsten Langgaard <carstenl@mips.com>
4 * Maciej W. Rozycki <macro@mips.com>
5 * Copyright (C) 2004 Ralf Baechle <ralf@linux-mips.org>
7 * This program is free software; you can distribute it and/or modify it
8 * under the terms of the GNU General Public License (Version 2) as
9 * published by the Free Software Foundation.
11 * This program is distributed in the hope it will be useful, but WITHOUT
12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
16 * You should have received a copy of the GNU General Public License along
17 * with this program; if not, write to the Free Software Foundation, Inc.,
18 * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
20 * SAA9730 ethernet driver.
23 * Angelo Dell'Aera <buffer@antifork.org> : Conversion to the new PCI API
25 * Conversion to spinlocks.
26 * Error handling fixes.
29 #include <linux/init.h>
30 #include <linux/netdevice.h>
31 #include <linux/delay.h>
32 #include <linux/etherdevice.h>
33 #include <linux/module.h>
34 #include <linux/skbuff.h>
35 #include <linux/pci.h>
36 #include <linux/spinlock.h>
37 #include <linux/types.h>
39 #include <asm/addrspace.h>
42 #include <asm/mips-boards/prom.h>
46 #ifdef LAN_SAA9730_DEBUG
47 int lan_saa9730_debug = LAN_SAA9730_DEBUG;
49 int lan_saa9730_debug;
52 #define DRV_MODULE_NAME "saa9730"
54 static struct pci_device_id saa9730_pci_tbl[] = {
55 { PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9730,
56 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
60 MODULE_DEVICE_TABLE(pci, saa9730_pci_tbl);
62 /* Non-zero only if the current card is a PCI with BIOS-set IRQ. */
63 static unsigned int pci_irq_line;
65 static void evm_saa9730_enable_lan_int(struct lan_saa9730_private *lp)
67 outl(readl(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
68 &lp->evm_saa9730_regs->InterruptBlock1);
69 outl(readl(&lp->evm_saa9730_regs->InterruptStatus1) | EVM_LAN_INT,
70 &lp->evm_saa9730_regs->InterruptStatus1);
71 outl(readl(&lp->evm_saa9730_regs->InterruptEnable1) | EVM_LAN_INT |
72 EVM_MASTER_EN, &lp->evm_saa9730_regs->InterruptEnable1);
75 static void evm_saa9730_disable_lan_int(struct lan_saa9730_private *lp)
77 outl(readl(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
78 &lp->evm_saa9730_regs->InterruptBlock1);
79 outl(readl(&lp->evm_saa9730_regs->InterruptEnable1) & ~EVM_LAN_INT,
80 &lp->evm_saa9730_regs->InterruptEnable1);
83 static void evm_saa9730_clear_lan_int(struct lan_saa9730_private *lp)
85 outl(EVM_LAN_INT, &lp->evm_saa9730_regs->InterruptStatus1);
88 static void evm_saa9730_block_lan_int(struct lan_saa9730_private *lp)
90 outl(readl(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
91 &lp->evm_saa9730_regs->InterruptBlock1);
94 static void evm_saa9730_unblock_lan_int(struct lan_saa9730_private *lp)
96 outl(readl(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
97 &lp->evm_saa9730_regs->InterruptBlock1);
100 static void __attribute_used__ show_saa9730_regs(struct lan_saa9730_private *lp)
103 printk("TxmBufferA = %p\n", lp->TxmBuffer[0][0]);
104 printk("TxmBufferB = %p\n", lp->TxmBuffer[1][0]);
105 printk("RcvBufferA = %p\n", lp->RcvBuffer[0][0]);
106 printk("RcvBufferB = %p\n", lp->RcvBuffer[1][0]);
107 for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
108 for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
109 printk("TxmBuffer[%d][%d] = %x\n", i, j,
110 le32_to_cpu(*(unsigned int *)
111 lp->TxmBuffer[i][j]));
114 for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
115 for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
116 printk("RcvBuffer[%d][%d] = %x\n", i, j,
117 le32_to_cpu(*(unsigned int *)
118 lp->RcvBuffer[i][j]));
121 printk("lp->evm_saa9730_regs->InterruptBlock1 = %x\n",
122 readl(&lp->evm_saa9730_regs->InterruptBlock1));
123 printk("lp->evm_saa9730_regs->InterruptStatus1 = %x\n",
124 readl(&lp->evm_saa9730_regs->InterruptStatus1));
125 printk("lp->evm_saa9730_regs->InterruptEnable1 = %x\n",
126 readl(&lp->evm_saa9730_regs->InterruptEnable1));
127 printk("lp->lan_saa9730_regs->Ok2Use = %x\n",
128 readl(&lp->lan_saa9730_regs->Ok2Use));
129 printk("lp->NextTxmBufferIndex = %x\n", lp->NextTxmBufferIndex);
130 printk("lp->NextTxmPacketIndex = %x\n", lp->NextTxmPacketIndex);
131 printk("lp->PendingTxmBufferIndex = %x\n",
132 lp->PendingTxmBufferIndex);
133 printk("lp->PendingTxmPacketIndex = %x\n",
134 lp->PendingTxmPacketIndex);
135 printk("lp->lan_saa9730_regs->LanDmaCtl = %x\n",
136 readl(&lp->lan_saa9730_regs->LanDmaCtl));
137 printk("lp->lan_saa9730_regs->DmaStatus = %x\n",
138 readl(&lp->lan_saa9730_regs->DmaStatus));
139 printk("lp->lan_saa9730_regs->CamCtl = %x\n",
140 readl(&lp->lan_saa9730_regs->CamCtl));
141 printk("lp->lan_saa9730_regs->TxCtl = %x\n",
142 readl(&lp->lan_saa9730_regs->TxCtl));
143 printk("lp->lan_saa9730_regs->TxStatus = %x\n",
144 readl(&lp->lan_saa9730_regs->TxStatus));
145 printk("lp->lan_saa9730_regs->RxCtl = %x\n",
146 readl(&lp->lan_saa9730_regs->RxCtl));
147 printk("lp->lan_saa9730_regs->RxStatus = %x\n",
148 readl(&lp->lan_saa9730_regs->RxStatus));
149 for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) {
150 outl(i, &lp->lan_saa9730_regs->CamAddress);
151 printk("lp->lan_saa9730_regs->CamData = %x\n",
152 readl(&lp->lan_saa9730_regs->CamData));
154 printk("lp->stats.tx_packets = %lx\n", lp->stats.tx_packets);
155 printk("lp->stats.tx_errors = %lx\n", lp->stats.tx_errors);
156 printk("lp->stats.tx_aborted_errors = %lx\n",
157 lp->stats.tx_aborted_errors);
158 printk("lp->stats.tx_window_errors = %lx\n",
159 lp->stats.tx_window_errors);
160 printk("lp->stats.tx_carrier_errors = %lx\n",
161 lp->stats.tx_carrier_errors);
162 printk("lp->stats.tx_fifo_errors = %lx\n",
163 lp->stats.tx_fifo_errors);
164 printk("lp->stats.tx_heartbeat_errors = %lx\n",
165 lp->stats.tx_heartbeat_errors);
166 printk("lp->stats.collisions = %lx\n", lp->stats.collisions);
168 printk("lp->stats.rx_packets = %lx\n", lp->stats.rx_packets);
169 printk("lp->stats.rx_errors = %lx\n", lp->stats.rx_errors);
170 printk("lp->stats.rx_dropped = %lx\n", lp->stats.rx_dropped);
171 printk("lp->stats.rx_crc_errors = %lx\n", lp->stats.rx_crc_errors);
172 printk("lp->stats.rx_frame_errors = %lx\n",
173 lp->stats.rx_frame_errors);
174 printk("lp->stats.rx_fifo_errors = %lx\n",
175 lp->stats.rx_fifo_errors);
176 printk("lp->stats.rx_length_errors = %lx\n",
177 lp->stats.rx_length_errors);
179 printk("lp->lan_saa9730_regs->DebugPCIMasterAddr = %x\n",
180 readl(&lp->lan_saa9730_regs->DebugPCIMasterAddr));
181 printk("lp->lan_saa9730_regs->DebugLanTxStateMachine = %x\n",
182 readl(&lp->lan_saa9730_regs->DebugLanTxStateMachine));
183 printk("lp->lan_saa9730_regs->DebugLanRxStateMachine = %x\n",
184 readl(&lp->lan_saa9730_regs->DebugLanRxStateMachine));
185 printk("lp->lan_saa9730_regs->DebugLanTxFifoPointers = %x\n",
186 readl(&lp->lan_saa9730_regs->DebugLanTxFifoPointers));
187 printk("lp->lan_saa9730_regs->DebugLanRxFifoPointers = %x\n",
188 readl(&lp->lan_saa9730_regs->DebugLanRxFifoPointers));
189 printk("lp->lan_saa9730_regs->DebugLanCtlStateMachine = %x\n",
190 readl(&lp->lan_saa9730_regs->DebugLanCtlStateMachine));
193 static void lan_saa9730_buffer_init(struct lan_saa9730_private *lp)
197 /* Init RX buffers */
198 for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
199 for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
200 *(unsigned int *) lp->RcvBuffer[i][j] =
201 cpu_to_le32(RXSF_READY <<
202 RX_STAT_CTL_OWNER_SHF);
206 /* Init TX buffers */
207 for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
208 for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
209 *(unsigned int *) lp->TxmBuffer[i][j] =
210 cpu_to_le32(TXSF_EMPTY <<
211 TX_STAT_CTL_OWNER_SHF);
216 static void lan_saa9730_free_buffers(struct pci_dev *pdev,
217 struct lan_saa9730_private *lp)
219 pci_free_consistent(pdev, lp->buffer_size, lp->buffer_start,
223 static int lan_saa9730_allocate_buffers(struct pci_dev *pdev,
224 struct lan_saa9730_private *lp)
227 unsigned int i, j, rxoffset, txoffset;
230 /* Initialize buffer space */
231 lp->DmaRcvPackets = LAN_SAA9730_RCV_Q_SIZE;
232 lp->DmaTxmPackets = LAN_SAA9730_TXM_Q_SIZE;
234 /* Initialize Rx Buffer Index */
235 lp->NextRcvPacketIndex = 0;
236 lp->NextRcvBufferIndex = 0;
238 /* Set current buffer index & next available packet index */
239 lp->NextTxmPacketIndex = 0;
240 lp->NextTxmBufferIndex = 0;
241 lp->PendingTxmPacketIndex = 0;
242 lp->PendingTxmBufferIndex = 0;
245 * Allocate all RX and TX packets in one chunk.
246 * The Rx and Tx packets must be PACKET_SIZE aligned.
248 lp->buffer_size = ((LAN_SAA9730_RCV_Q_SIZE + LAN_SAA9730_TXM_Q_SIZE) *
249 LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_BUFFERS) +
250 LAN_SAA9730_PACKET_SIZE;
251 lp->buffer_start = pci_alloc_consistent(pdev, lp->buffer_size,
253 if (!lp->buffer_start) {
258 Pa = (void *)ALIGN((unsigned long)lp->buffer_start,
259 LAN_SAA9730_PACKET_SIZE);
261 rxoffset = Pa - lp->buffer_start;
263 /* Init RX buffers */
264 for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
265 for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
266 *(unsigned int *) Pa =
267 cpu_to_le32(RXSF_READY <<
268 RX_STAT_CTL_OWNER_SHF);
269 lp->RcvBuffer[i][j] = Pa;
270 Pa += LAN_SAA9730_PACKET_SIZE;
274 txoffset = Pa - lp->buffer_start;
276 /* Init TX buffers */
277 for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
278 for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
279 *(unsigned int *) Pa =
280 cpu_to_le32(TXSF_EMPTY <<
281 TX_STAT_CTL_OWNER_SHF);
282 lp->TxmBuffer[i][j] = Pa;
283 Pa += LAN_SAA9730_PACKET_SIZE;
288 * Set rx buffer A and rx buffer B to point to the first two buffer
291 outl(lp->dma_addr + rxoffset,
292 &lp->lan_saa9730_regs->RxBuffA);
293 outl(lp->dma_addr + rxoffset +
294 LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_RCV_Q_SIZE,
295 &lp->lan_saa9730_regs->RxBuffB);
298 * Set txm_buf_a and txm_buf_b to point to the first two buffer
301 outl(lp->dma_addr + txoffset,
302 &lp->lan_saa9730_regs->TxBuffA);
303 outl(lp->dma_addr + txoffset +
304 LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_TXM_Q_SIZE,
305 &lp->lan_saa9730_regs->TxBuffB);
307 /* Set packet number */
308 outl((lp->DmaRcvPackets << PK_COUNT_RX_A_SHF) |
309 (lp->DmaRcvPackets << PK_COUNT_RX_B_SHF) |
310 (lp->DmaTxmPackets << PK_COUNT_TX_A_SHF) |
311 (lp->DmaTxmPackets << PK_COUNT_TX_B_SHF),
312 &lp->lan_saa9730_regs->PacketCount);
320 static int lan_saa9730_cam_load(struct lan_saa9730_private *lp)
323 unsigned char *NetworkAddress;
325 NetworkAddress = (unsigned char *) &lp->PhysicalAddress[0][0];
327 for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) {
328 /* First set address to where data is written */
329 outl(i, &lp->lan_saa9730_regs->CamAddress);
330 outl((NetworkAddress[0] << 24) | (NetworkAddress[1] << 16)
331 | (NetworkAddress[2] << 8) | NetworkAddress[3],
332 &lp->lan_saa9730_regs->CamData);
338 static int lan_saa9730_cam_init(struct net_device *dev)
340 struct lan_saa9730_private *lp = netdev_priv(dev);
343 /* Copy MAC-address into all entries. */
344 for (i = 0; i < LAN_SAA9730_CAM_ENTRIES; i++) {
345 memcpy((unsigned char *) lp->PhysicalAddress[i],
346 (unsigned char *) dev->dev_addr, 6);
352 static int lan_saa9730_mii_init(struct lan_saa9730_private *lp)
356 /* Check link status, spin here till station is not busy. */
358 while (readl(&lp->lan_saa9730_regs->StationMgmtCtl) & MD_CA_BUSY) {
361 printk("Error: lan_saa9730_mii_init: timeout\n");
364 mdelay(1); /* wait 1 ms. */
367 /* Now set the control and address register. */
368 outl(MD_CA_BUSY | PHY_STATUS | PHY_ADDRESS << MD_CA_PHY_SHF,
369 &lp->lan_saa9730_regs->StationMgmtCtl);
371 /* check link status, spin here till station is not busy */
373 while (readl(&lp->lan_saa9730_regs->StationMgmtCtl) & MD_CA_BUSY) {
376 printk("Error: lan_saa9730_mii_init: timeout\n");
379 mdelay(1); /* wait 1 ms. */
385 /* Check the link status. */
386 if (readl(&lp->lan_saa9730_regs->StationMgmtData) &
387 PHY_STATUS_LINK_UP) {
391 /* Link is down, reset the PHY first. */
393 /* set PHY address = 'CONTROL' */
394 outl(PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR | PHY_CONTROL,
395 &lp->lan_saa9730_regs->StationMgmtCtl);
400 /* set 'CONTROL' = force reset and renegotiate */
401 outl(PHY_CONTROL_RESET | PHY_CONTROL_AUTO_NEG |
402 PHY_CONTROL_RESTART_AUTO_NEG,
403 &lp->lan_saa9730_regs->StationMgmtData);
405 /* Wait for 50 ms. */
408 /* set 'BUSY' to start operation */
409 outl(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR |
410 PHY_CONTROL, &lp->lan_saa9730_regs->StationMgmtCtl);
412 /* await completion */
414 while (readl(&lp->lan_saa9730_regs->StationMgmtCtl) &
419 ("Error: lan_saa9730_mii_init: timeout\n");
422 mdelay(1); /* wait 1 ms. */
428 for (l = 0; l < 2; l++) {
429 /* set PHY address = 'STATUS' */
430 outl(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF |
432 &lp->lan_saa9730_regs->StationMgmtCtl);
434 /* await completion */
436 while (readl(&lp->lan_saa9730_regs->StationMgmtCtl) &
441 ("Error: lan_saa9730_mii_init: timeout\n");
444 mdelay(1); /* wait 1 ms. */
447 /* wait for 3 sec. */
450 /* check the link status */
451 if (readl(&lp->lan_saa9730_regs->StationMgmtData) &
452 PHY_STATUS_LINK_UP) {
462 static int lan_saa9730_control_init(struct lan_saa9730_private *lp)
464 /* Initialize DMA control register. */
465 outl((LANMB_ANY << DMA_CTL_MAX_XFER_SHF) |
466 (LANEND_LITTLE << DMA_CTL_ENDIAN_SHF) |
467 (LAN_SAA9730_RCV_Q_INT_THRESHOLD << DMA_CTL_RX_INT_COUNT_SHF)
468 | DMA_CTL_RX_INT_TO_EN | DMA_CTL_RX_INT_EN |
469 DMA_CTL_MAC_RX_INT_EN | DMA_CTL_MAC_TX_INT_EN,
470 &lp->lan_saa9730_regs->LanDmaCtl);
472 /* Initial MAC control register. */
473 outl((MACCM_MII << MAC_CONTROL_CONN_SHF) | MAC_CONTROL_FULL_DUP,
474 &lp->lan_saa9730_regs->MacCtl);
476 /* Initialize CAM control register. */
477 outl(CAM_CONTROL_COMP_EN | CAM_CONTROL_BROAD_ACC,
478 &lp->lan_saa9730_regs->CamCtl);
481 * Initialize CAM enable register, only turn on first entry, should
484 outl(0x0001, &lp->lan_saa9730_regs->CamEnable);
486 /* Initialize Tx control register */
487 outl(TX_CTL_EN_COMP, &lp->lan_saa9730_regs->TxCtl);
489 /* Initialize Rcv control register */
490 outl(RX_CTL_STRIP_CRC, &lp->lan_saa9730_regs->RxCtl);
492 /* Reset DMA engine */
493 outl(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
498 static int lan_saa9730_stop(struct lan_saa9730_private *lp)
503 outl(readl(&lp->lan_saa9730_regs->LanDmaCtl) &
504 ~(DMA_CTL_EN_TX_DMA | DMA_CTL_EN_RX_DMA),
505 &lp->lan_saa9730_regs->LanDmaCtl);
507 /* Set the SW Reset bits in DMA and MAC control registers */
508 outl(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
509 outl(readl(&lp->lan_saa9730_regs->MacCtl) | MAC_CONTROL_RESET,
510 &lp->lan_saa9730_regs->MacCtl);
513 * Wait for MAC reset to have finished. The reset bit is auto cleared
514 * when the reset is done.
517 while (readl(&lp->lan_saa9730_regs->MacCtl) & MAC_CONTROL_RESET) {
521 ("Error: lan_sa9730_stop: MAC reset timeout\n");
524 mdelay(1); /* wait 1 ms. */
530 static int lan_saa9730_dma_init(struct lan_saa9730_private *lp)
532 /* Stop lan controller. */
533 lan_saa9730_stop(lp);
535 outl(LAN_SAA9730_DEFAULT_TIME_OUT_CNT,
536 &lp->lan_saa9730_regs->Timeout);
541 static int lan_saa9730_start(struct lan_saa9730_private *lp)
543 lan_saa9730_buffer_init(lp);
545 /* Initialize Rx Buffer Index */
546 lp->NextRcvPacketIndex = 0;
547 lp->NextRcvBufferIndex = 0;
549 /* Set current buffer index & next available packet index */
550 lp->NextTxmPacketIndex = 0;
551 lp->NextTxmBufferIndex = 0;
552 lp->PendingTxmPacketIndex = 0;
553 lp->PendingTxmBufferIndex = 0;
555 outl(readl(&lp->lan_saa9730_regs->LanDmaCtl) | DMA_CTL_EN_TX_DMA |
556 DMA_CTL_EN_RX_DMA, &lp->lan_saa9730_regs->LanDmaCtl);
558 /* For Tx, turn on MAC then DMA */
559 outl(readl(&lp->lan_saa9730_regs->TxCtl) | TX_CTL_TX_EN,
560 &lp->lan_saa9730_regs->TxCtl);
562 /* For Rx, turn on DMA then MAC */
563 outl(readl(&lp->lan_saa9730_regs->RxCtl) | RX_CTL_RX_EN,
564 &lp->lan_saa9730_regs->RxCtl);
566 /* Set Ok2Use to let hardware own the buffers. */
567 outl(OK2USE_RX_A | OK2USE_RX_B, &lp->lan_saa9730_regs->Ok2Use);
572 static int lan_saa9730_restart(struct lan_saa9730_private *lp)
574 lan_saa9730_stop(lp);
575 lan_saa9730_start(lp);
580 static int lan_saa9730_tx(struct net_device *dev)
582 struct lan_saa9730_private *lp = netdev_priv(dev);
583 unsigned int *pPacket;
584 unsigned int tx_status;
586 if (lan_saa9730_debug > 5)
587 printk("lan_saa9730_tx interrupt\n");
589 /* Clear interrupt. */
590 outl(DMA_STATUS_MAC_TX_INT, &lp->lan_saa9730_regs->DmaStatus);
593 pPacket = lp->TxmBuffer[lp->PendingTxmBufferIndex]
594 [lp->PendingTxmPacketIndex];
596 /* Get status of first packet transmitted. */
597 tx_status = le32_to_cpu(*pPacket);
599 /* Check ownership. */
600 if ((tx_status & TX_STAT_CTL_OWNER_MSK) !=
601 (TXSF_HWDONE << TX_STAT_CTL_OWNER_SHF)) break;
603 /* Check for error. */
604 if (tx_status & TX_STAT_CTL_ERROR_MSK) {
605 if (lan_saa9730_debug > 1)
606 printk("lan_saa9730_tx: tx error = %x\n",
609 lp->stats.tx_errors++;
611 (TX_STATUS_EX_COLL << TX_STAT_CTL_STATUS_SHF))
612 lp->stats.tx_aborted_errors++;
614 (TX_STATUS_LATE_COLL << TX_STAT_CTL_STATUS_SHF))
615 lp->stats.tx_window_errors++;
617 (TX_STATUS_L_CARR << TX_STAT_CTL_STATUS_SHF))
618 lp->stats.tx_carrier_errors++;
620 (TX_STATUS_UNDER << TX_STAT_CTL_STATUS_SHF))
621 lp->stats.tx_fifo_errors++;
623 (TX_STATUS_SQ_ERR << TX_STAT_CTL_STATUS_SHF))
624 lp->stats.tx_heartbeat_errors++;
626 lp->stats.collisions +=
627 tx_status & TX_STATUS_TX_COLL_MSK;
632 cpu_to_le32(TXSF_EMPTY << TX_STAT_CTL_OWNER_SHF);
634 /* Update pending index pointer. */
635 lp->PendingTxmPacketIndex++;
636 if (lp->PendingTxmPacketIndex >= LAN_SAA9730_TXM_Q_SIZE) {
637 lp->PendingTxmPacketIndex = 0;
638 lp->PendingTxmBufferIndex ^= 1;
642 /* The tx buffer is no longer full. */
643 netif_wake_queue(dev);
648 static int lan_saa9730_rx(struct net_device *dev)
650 struct lan_saa9730_private *lp = netdev_priv(dev);
652 struct sk_buff *skb = 0;
653 unsigned int rx_status;
656 unsigned int *pPacket;
657 unsigned char *pData;
659 if (lan_saa9730_debug > 5)
660 printk("lan_saa9730_rx interrupt\n");
662 /* Clear receive interrupts. */
663 outl(DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT |
664 DMA_STATUS_RX_TO_INT, &lp->lan_saa9730_regs->DmaStatus);
666 /* Address next packet */
667 BufferIndex = lp->NextRcvBufferIndex;
668 PacketIndex = lp->NextRcvPacketIndex;
669 pPacket = lp->RcvBuffer[BufferIndex][PacketIndex];
670 rx_status = le32_to_cpu(*pPacket);
672 /* Process each packet. */
673 while ((rx_status & RX_STAT_CTL_OWNER_MSK) ==
674 (RXSF_HWDONE << RX_STAT_CTL_OWNER_SHF)) {
675 /* Check the rx status. */
676 if (rx_status & (RX_STATUS_GOOD << RX_STAT_CTL_STATUS_SHF)) {
677 /* Received packet is good. */
678 len = (rx_status & RX_STAT_CTL_LENGTH_MSK) >>
679 RX_STAT_CTL_LENGTH_SHF;
681 pData = (unsigned char *) pPacket;
683 skb = dev_alloc_skb(len + 2);
686 ("%s: Memory squeeze, deferring packet.\n",
688 lp->stats.rx_dropped++;
690 lp->stats.rx_bytes += len;
691 lp->stats.rx_packets++;
693 skb_reserve(skb, 2); /* 16 byte align */
694 skb_put(skb, len); /* make room */
695 eth_copy_and_sum(skb,
696 (unsigned char *) pData,
698 skb->protocol = eth_type_trans(skb, dev);
700 dev->last_rx = jiffies;
703 /* We got an error packet. */
704 if (lan_saa9730_debug > 2)
706 ("lan_saa9730_rx: We got an error packet = %x\n",
709 lp->stats.rx_errors++;
711 (RX_STATUS_CRC_ERR << RX_STAT_CTL_STATUS_SHF))
712 lp->stats.rx_crc_errors++;
714 (RX_STATUS_ALIGN_ERR << RX_STAT_CTL_STATUS_SHF))
715 lp->stats.rx_frame_errors++;
717 (RX_STATUS_OVERFLOW << RX_STAT_CTL_STATUS_SHF))
718 lp->stats.rx_fifo_errors++;
720 (RX_STATUS_LONG_ERR << RX_STAT_CTL_STATUS_SHF))
721 lp->stats.rx_length_errors++;
724 /* Indicate we have processed the buffer. */
725 *pPacket = cpu_to_le32(RXSF_READY << RX_STAT_CTL_OWNER_SHF);
727 /* Make sure A or B is available to hardware as appropriate. */
728 outl(BufferIndex ? OK2USE_RX_B : OK2USE_RX_A,
729 &lp->lan_saa9730_regs->Ok2Use);
731 /* Go to next packet in sequence. */
732 lp->NextRcvPacketIndex++;
733 if (lp->NextRcvPacketIndex >= LAN_SAA9730_RCV_Q_SIZE) {
734 lp->NextRcvPacketIndex = 0;
735 lp->NextRcvBufferIndex ^= 1;
738 /* Address next packet */
739 BufferIndex = lp->NextRcvBufferIndex;
740 PacketIndex = lp->NextRcvPacketIndex;
741 pPacket = lp->RcvBuffer[BufferIndex][PacketIndex];
742 rx_status = le32_to_cpu(*pPacket);
748 static irqreturn_t lan_saa9730_interrupt(const int irq, void *dev_id,
749 struct pt_regs *regs)
751 struct net_device *dev = (struct net_device *) dev_id;
752 struct lan_saa9730_private *lp = netdev_priv(dev);
754 if (lan_saa9730_debug > 5)
755 printk("lan_saa9730_interrupt\n");
757 /* Disable the EVM LAN interrupt. */
758 evm_saa9730_block_lan_int(lp);
760 /* Clear the EVM LAN interrupt. */
761 evm_saa9730_clear_lan_int(lp);
763 /* Service pending transmit interrupts. */
764 if (readl(&lp->lan_saa9730_regs->DmaStatus) & DMA_STATUS_MAC_TX_INT)
767 /* Service pending receive interrupts. */
768 if (readl(&lp->lan_saa9730_regs->DmaStatus) &
769 (DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT |
770 DMA_STATUS_RX_TO_INT)) lan_saa9730_rx(dev);
772 /* Enable the EVM LAN interrupt. */
773 evm_saa9730_unblock_lan_int(lp);
778 static int lan_saa9730_open(struct net_device *dev)
780 struct lan_saa9730_private *lp = netdev_priv(dev);
782 /* Associate IRQ with lan_saa9730_interrupt */
783 if (request_irq(dev->irq, &lan_saa9730_interrupt, 0, "SAA9730 Eth",
785 printk("lan_saa9730_open: Can't get irq %d\n", dev->irq);
789 /* Enable the Lan interrupt in the event manager. */
790 evm_saa9730_enable_lan_int(lp);
792 /* Start the LAN controller */
793 if (lan_saa9730_start(lp))
796 netif_start_queue(dev);
801 static int lan_saa9730_write(struct lan_saa9730_private *lp,
802 struct sk_buff *skb, int skblen)
804 unsigned char *pbData = skb->data;
805 unsigned int len = skblen;
806 unsigned char *pbPacketData;
807 unsigned int tx_status;
811 if (lan_saa9730_debug > 5)
812 printk("lan_saa9730_write: skb=%p\n", skb);
814 BufferIndex = lp->NextTxmBufferIndex;
815 PacketIndex = lp->NextTxmPacketIndex;
817 tx_status = le32_to_cpu(*(unsigned int *)lp->TxmBuffer[BufferIndex]
819 if ((tx_status & TX_STAT_CTL_OWNER_MSK) !=
820 (TXSF_EMPTY << TX_STAT_CTL_OWNER_SHF)) {
821 if (lan_saa9730_debug > 4)
823 ("lan_saa9730_write: Tx buffer not available: tx_status = %x\n",
828 lp->NextTxmPacketIndex++;
829 if (lp->NextTxmPacketIndex >= LAN_SAA9730_TXM_Q_SIZE) {
830 lp->NextTxmPacketIndex = 0;
831 lp->NextTxmBufferIndex ^= 1;
834 pbPacketData = lp->TxmBuffer[BufferIndex][PacketIndex];
838 memcpy(pbPacketData, pbData, len);
840 /* Set transmit status for hardware */
841 *(unsigned int *)lp->TxmBuffer[BufferIndex][PacketIndex] =
842 cpu_to_le32((TXSF_READY << TX_STAT_CTL_OWNER_SHF) |
843 (TX_STAT_CTL_INT_AFTER_TX <<
844 TX_STAT_CTL_FRAME_SHF) |
845 (len << TX_STAT_CTL_LENGTH_SHF));
847 /* Make sure A or B is available to hardware as appropriate. */
848 outl(BufferIndex ? OK2USE_TX_B : OK2USE_TX_A,
849 &lp->lan_saa9730_regs->Ok2Use);
854 static void lan_saa9730_tx_timeout(struct net_device *dev)
856 struct lan_saa9730_private *lp = netdev_priv(dev);
858 /* Transmitter timeout, serious problems */
859 lp->stats.tx_errors++;
860 printk("%s: transmit timed out, reset\n", dev->name);
861 /*show_saa9730_regs(lp); */
862 lan_saa9730_restart(lp);
864 dev->trans_start = jiffies;
865 netif_wake_queue(dev);
868 static int lan_saa9730_start_xmit(struct sk_buff *skb,
869 struct net_device *dev)
871 struct lan_saa9730_private *lp = netdev_priv(dev);
876 if (lan_saa9730_debug > 4)
877 printk("Send packet: skb=%p\n", skb);
881 spin_lock_irqsave(&lp->lock, flags);
883 len = (skblen <= ETH_ZLEN) ? ETH_ZLEN : skblen;
885 if (lan_saa9730_write(lp, skb, skblen)) {
886 spin_unlock_irqrestore(&lp->lock, flags);
887 printk("Error when writing packet to controller: skb=%p\n", skb);
888 netif_stop_queue(dev);
892 lp->stats.tx_bytes += len;
893 lp->stats.tx_packets++;
895 dev->trans_start = jiffies;
896 netif_wake_queue(dev);
899 spin_unlock_irqrestore(&lp->lock, flags);
904 static int lan_saa9730_close(struct net_device *dev)
906 struct lan_saa9730_private *lp = netdev_priv(dev);
908 if (lan_saa9730_debug > 1)
909 printk("lan_saa9730_close:\n");
911 netif_stop_queue(dev);
913 /* Disable the Lan interrupt in the event manager. */
914 evm_saa9730_disable_lan_int(lp);
916 /* Stop the controller */
917 if (lan_saa9730_stop(lp))
920 free_irq(dev->irq, (void *) dev);
925 static struct net_device_stats *lan_saa9730_get_stats(struct net_device
928 struct lan_saa9730_private *lp = netdev_priv(dev);
933 static void lan_saa9730_set_multicast(struct net_device *dev)
935 struct lan_saa9730_private *lp = netdev_priv(dev);
937 /* Stop the controller */
938 lan_saa9730_stop(lp);
940 if (dev->flags & IFF_PROMISC) {
941 /* accept all packets */
942 outl(CAM_CONTROL_COMP_EN | CAM_CONTROL_STATION_ACC |
943 CAM_CONTROL_GROUP_ACC | CAM_CONTROL_BROAD_ACC,
944 &lp->lan_saa9730_regs->CamCtl);
946 if (dev->flags & IFF_ALLMULTI) {
947 /* accept all multicast packets */
948 outl(CAM_CONTROL_COMP_EN | CAM_CONTROL_GROUP_ACC |
949 CAM_CONTROL_BROAD_ACC,
950 &lp->lan_saa9730_regs->CamCtl);
953 * Will handle the multicast stuff later. -carstenl
958 lan_saa9730_restart(lp);
962 static void __devexit saa9730_remove_one(struct pci_dev *pdev)
964 struct net_device *dev = pci_get_drvdata(pdev);
965 struct lan_saa9730_private *lp = netdev_priv(dev);
968 unregister_netdev(dev);
969 lan_saa9730_free_buffers(pdev, lp);
970 iounmap(lp->lan_saa9730_regs);
971 iounmap(lp->evm_saa9730_regs);
973 pci_release_regions(pdev);
974 pci_disable_device(pdev);
975 pci_set_drvdata(pdev, NULL);
980 static int lan_saa9730_init(struct net_device *dev, struct pci_dev *pdev,
981 unsigned long ioaddr, int irq)
983 struct lan_saa9730_private *lp = netdev_priv(dev);
984 unsigned char ethernet_addr[6];
987 if (get_ethernet_addr(ethernet_addr)) {
992 memcpy(dev->dev_addr, ethernet_addr, 6);
993 dev->base_addr = ioaddr;
998 /* Set SAA9730 LAN base address. */
999 lp->lan_saa9730_regs = ioremap(ioaddr + SAA9730_LAN_REGS_ADDR,
1000 SAA9730_LAN_REGS_SIZE);
1001 if (!lp->lan_saa9730_regs) {
1006 /* Set SAA9730 EVM base address. */
1007 lp->evm_saa9730_regs = ioremap(ioaddr + SAA9730_EVM_REGS_ADDR,
1008 SAA9730_EVM_REGS_SIZE);
1009 if (!lp->evm_saa9730_regs) {
1011 goto out_iounmap_lan;
1014 /* Allocate LAN RX/TX frame buffer space. */
1015 if ((ret = lan_saa9730_allocate_buffers(pdev, lp)))
1018 /* Stop LAN controller. */
1019 if ((ret = lan_saa9730_stop(lp)))
1020 goto out_free_consistent;
1022 /* Initialize CAM registers. */
1023 if ((ret = lan_saa9730_cam_init(dev)))
1024 goto out_free_consistent;
1026 /* Initialize MII registers. */
1027 if ((ret = lan_saa9730_mii_init(lp)))
1028 goto out_free_consistent;
1030 /* Initialize control registers. */
1031 if ((ret = lan_saa9730_control_init(lp)))
1032 goto out_free_consistent;
1034 /* Load CAM registers. */
1035 if ((ret = lan_saa9730_cam_load(lp)))
1036 goto out_free_consistent;
1038 /* Initialize DMA context registers. */
1039 if ((ret = lan_saa9730_dma_init(lp)))
1040 goto out_free_consistent;
1042 spin_lock_init(&lp->lock);
1044 dev->open = lan_saa9730_open;
1045 dev->hard_start_xmit = lan_saa9730_start_xmit;
1046 dev->stop = lan_saa9730_close;
1047 dev->get_stats = lan_saa9730_get_stats;
1048 dev->set_multicast_list = lan_saa9730_set_multicast;
1049 dev->tx_timeout = lan_saa9730_tx_timeout;
1050 dev->watchdog_timeo = (HZ >> 1);
1053 ret = register_netdev (dev);
1055 goto out_free_consistent;
1059 out_free_consistent:
1060 lan_saa9730_free_buffers(pdev, lp);
1062 iounmap(lp->evm_saa9730_regs);
1064 iounmap(lp->lan_saa9730_regs);
1070 static int __devinit saa9730_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
1072 struct net_device *dev = NULL;
1073 unsigned long pci_ioaddr;
1076 if (lan_saa9730_debug > 1)
1077 printk("saa9730.c: PCI bios is present, checking for devices...\n");
1079 err = pci_enable_device(pdev);
1081 printk(KERN_ERR "Cannot enable PCI device, aborting.\n");
1085 err = pci_request_regions(pdev, DRV_MODULE_NAME);
1087 printk(KERN_ERR "Cannot obtain PCI resources, aborting.\n");
1088 goto out_disable_pdev;
1091 pci_irq_line = pdev->irq;
1092 /* LAN base address in located at BAR 1. */
1094 pci_ioaddr = pci_resource_start(pdev, 1);
1095 pci_set_master(pdev);
1097 printk("Found SAA9730 (PCI) at %lx, irq %d.\n",
1098 pci_ioaddr, pci_irq_line);
1100 dev = alloc_etherdev(sizeof(struct lan_saa9730_private));
1102 goto out_disable_pdev;
1104 err = lan_saa9730_init(dev, pdev, pci_ioaddr, pci_irq_line);
1106 printk("LAN init failed");
1107 goto out_free_netdev;
1110 pci_set_drvdata(pdev, dev);
1111 SET_NETDEV_DEV(dev, &pdev->dev);
1117 pci_disable_device(pdev);
1119 pci_set_drvdata(pdev, NULL);
1124 static struct pci_driver saa9730_driver = {
1125 .name = DRV_MODULE_NAME,
1126 .id_table = saa9730_pci_tbl,
1127 .probe = saa9730_init_one,
1128 .remove = __devexit_p(saa9730_remove_one),
1132 static int __init saa9730_init(void)
1134 return pci_module_init(&saa9730_driver);
1137 static void __exit saa9730_cleanup(void)
1139 pci_unregister_driver(&saa9730_driver);
1142 module_init(saa9730_init);
1143 module_exit(saa9730_cleanup);
1145 MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
1146 MODULE_DESCRIPTION("Philips SAA9730 ethernet driver");
1147 MODULE_LICENSE("GPL");