drivers/net/gianfar.c

   1 /*
   2  * drivers/net/gianfar.c
   3  *
   4  * Gianfar Ethernet Driver
   5  * This driver is designed for the non-CPM ethernet controllers
   6  * on the 85xx and 83xx family of integrated processors
   7  * Based on 8260_io/fcc_enet.c
   8  *
   9  * Author: Andy Fleming
  10  * Maintainer: Kumar Gala
  11  *
  12  * Copyright (c) 2002-2006 Freescale Semiconductor, Inc.
  13  * Copyright (c) 2007 MontaVista Software, Inc.
  14  *
  15  * This program is free software; you can redistribute  it and/or modify it
  16  * under  the terms of  the GNU General  Public License as published by the
  17  * Free Software Foundation;  either version 2 of the  License, or (at your
  18  * option) any later version.
  19  *
  20  *  Gianfar:  AKA Lambda Draconis, "Dragon"
  21  *  RA 11 31 24.2
  22  *  Dec +69 19 52
  23  *  V 3.84
  24  *  B-V +1.62
  25  *
  26  *  Theory of operation
  27  *
  28  *  The driver is initialized through platform_device.  Structures which
  29  *  define the configuration needed by the board are defined in a
  30  *  board structure in arch/ppc/platforms (though I do not
  31  *  discount the possibility that other architectures could one
  32  *  day be supported.
  33  *
  34  *  The Gianfar Ethernet Controller uses a ring of buffer
  35  *  descriptors.  The beginning is indicated by a register
  36  *  pointing to the physical address of the start of the ring.
  37  *  The end is determined by a "wrap" bit being set in the
  38  *  last descriptor of the ring.
  39  *
  40  *  When a packet is received, the RXF bit in the
  41  *  IEVENT register is set, triggering an interrupt when the
  42  *  corresponding bit in the IMASK register is also set (if
  43  *  interrupt coalescing is active, then the interrupt may not
  44  *  happen immediately, but will wait until either a set number
  45  *  of frames or amount of time have passed).  In NAPI, the
  46  *  interrupt handler will signal there is work to be done, and
  47  *  exit.  Without NAPI, the packet(s) will be handled
  48  *  immediately.  Both methods will start at the last known empty
  49  *  descriptor, and process every subsequent descriptor until there
  50  *  are none left with data (NAPI will stop after a set number of
  51  *  packets to give time to other tasks, but will eventually
  52  *  process all the packets).  The data arrives inside a
  53  *  pre-allocated skb, and so after the skb is passed up to the
  54  *  stack, a new skb must be allocated, and the address field in
  55  *  the buffer descriptor must be updated to indicate this new
  56  *  skb.
  57  *
  58  *  When the kernel requests that a packet be transmitted, the
  59  *  driver starts where it left off last time, and points the
  60  *  descriptor at the buffer which was passed in.  The driver
  61  *  then informs the DMA engine that there are packets ready to
  62  *  be transmitted.  Once the controller is finished transmitting
  63  *  the packet, an interrupt may be triggered (under the same
  64  *  conditions as for reception, but depending on the TXF bit).
  65  *  The driver then cleans up the buffer.
  66  */
  67
  68 #include <linux/kernel.h>
  69 #include <linux/string.h>
  70 #include <linux/errno.h>
  71 #include <linux/unistd.h>
  72 #include <linux/slab.h>
  73 #include <linux/interrupt.h>
  74 #include <linux/init.h>
  75 #include <linux/delay.h>
  76 #include <linux/netdevice.h>
  77 #include <linux/etherdevice.h>
  78 #include <linux/skbuff.h>
  79 #include <linux/if_vlan.h>
  80 #include <linux/spinlock.h>
  81 #include <linux/mm.h>
  82 #include <linux/platform_device.h>
  83 #include <linux/ip.h>
  84 #include <linux/tcp.h>
  85 #include <linux/udp.h>
  86 #include <linux/in.h>
  87
  88 #include <asm/io.h>
  89 #include <asm/irq.h>
  90 #include <asm/uaccess.h>
  91 #include <linux/module.h>
  92 #include <linux/dma-mapping.h>
  93 #include <linux/crc32.h>
  94 #include <linux/mii.h>
  95 #include <linux/phy.h>
  96
  97 #include "gianfar.h"
  98 #include "gianfar_mii.h"
  99
 100 #define TX_TIMEOUT      (1*HZ)
 101 #define SKB_ALLOC_TIMEOUT 1000000
 102 #undef BRIEF_GFAR_ERRORS
 103 #undef VERBOSE_GFAR_ERRORS
 104
 105 #ifdef CONFIG_GFAR_NAPI
 106 #define RECEIVE(x) netif_receive_skb(x)
 107 #else
 108 #define RECEIVE(x) netif_rx(x)
 109 #endif
 110
 111 const char gfar_driver_name[] = "Gianfar Ethernet";
 112 const char gfar_driver_version[] = "1.3";
 113
 114 static int gfar_enet_open(struct net_device *dev);
 115 static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
 116 static void gfar_timeout(struct net_device *dev);
 117 static int gfar_close(struct net_device *dev);
 118 struct sk_buff *gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp);
 119 static int gfar_set_mac_address(struct net_device *dev);
 120 static int gfar_change_mtu(struct net_device *dev, int new_mtu);
 121 static irqreturn_t gfar_error(int irq, void *dev_id);
 122 static irqreturn_t gfar_transmit(int irq, void *dev_id);
 123 static irqreturn_t gfar_interrupt(int irq, void *dev_id);
 124 static void adjust_link(struct net_device *dev);
 125 static void init_registers(struct net_device *dev);
 126 static int init_phy(struct net_device *dev);
 127 static int gfar_probe(struct platform_device *pdev);
 128 static int gfar_remove(struct platform_device *pdev);
 129 static void free_skb_resources(struct gfar_private *priv);
 130 static void gfar_set_multi(struct net_device *dev);
 131 static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr);
 132 static void gfar_configure_serdes(struct net_device *dev);
 133 extern int gfar_local_mdio_write(struct gfar_mii *regs, int mii_id, int regnum, u16 value);
 134 extern int gfar_local_mdio_read(struct gfar_mii *regs, int mii_id, int regnum);
 135 #ifdef CONFIG_GFAR_NAPI
 136 static int gfar_poll(struct napi_struct *napi, int budget);
 137 #endif
 138 #ifdef CONFIG_NET_POLL_CONTROLLER
 139 static void gfar_netpoll(struct net_device *dev);
 140 #endif
 141 int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
 142 static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int length);
 143 static void gfar_vlan_rx_register(struct net_device *netdev,
 144                                 struct vlan_group *grp);
 145 void gfar_halt(struct net_device *dev);
 146 void gfar_start(struct net_device *dev);
 147 static void gfar_clear_exact_match(struct net_device *dev);
 148 static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
 149
 150 extern const struct ethtool_ops gfar_ethtool_ops;
 151
 152 MODULE_AUTHOR("Freescale Semiconductor, Inc");
 153 MODULE_DESCRIPTION("Gianfar Ethernet Driver");
 154 MODULE_LICENSE("GPL");
 155
 156 /* Returns 1 if incoming frames use an FCB */
 157 static inline int gfar_uses_fcb(struct gfar_private *priv)
 158 {
 159         return (priv->vlan_enable || priv->rx_csum_enable);
 160 }
 161
 162 /* Set up the ethernet device structure, private data,
 163  * and anything else we need before we start */
 164 static int gfar_probe(struct platform_device *pdev)
 165 {
 166         u32 tempval;
 167         struct net_device *dev = NULL;
 168         struct gfar_private *priv = NULL;
 169         struct gianfar_platform_data *einfo;
 170         struct resource *r;
 171         int idx;
 172         int err = 0;
 173         DECLARE_MAC_BUF(mac);
 174
 175         einfo = (struct gianfar_platform_data *) pdev->dev.platform_data;
 176
 177         if (NULL == einfo) {
 178                 printk(KERN_ERR "gfar %d: Missing additional data!\n",
 179                        pdev->id);
 180
 181                 return -ENODEV;
 182         }
 183
 184         /* Create an ethernet device instance */
 185         dev = alloc_etherdev(sizeof (*priv));
 186
 187         if (NULL == dev)
 188                 return -ENOMEM;
 189
 190         priv = netdev_priv(dev);
 191         priv->dev = dev;
 192
 193         /* Set the info in the priv to the current info */
 194         priv->einfo = einfo;
 195
 196         /* fill out IRQ fields */
 197         if (einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
 198                 priv->interruptTransmit = platform_get_irq_byname(pdev, "tx");
 199                 priv->interruptReceive = platform_get_irq_byname(pdev, "rx");
 200                 priv->interruptError = platform_get_irq_byname(pdev, "error");
 201                 if (priv->interruptTransmit < 0 || priv->interruptReceive < 0 || priv->interruptError < 0)
 202                         goto regs_fail;
 203         } else {
 204                 priv->interruptTransmit = platform_get_irq(pdev, 0);
 205                 if (priv->interruptTransmit < 0)
 206                         goto regs_fail;
 207         }
 208
 209         /* get a pointer to the register memory */
 210         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 211         priv->regs = ioremap(r->start, sizeof (struct gfar));
 212
 213         if (NULL == priv->regs) {
 214                 err = -ENOMEM;
 215                 goto regs_fail;
 216         }
 217
 218         spin_lock_init(&priv->txlock);
 219         spin_lock_init(&priv->rxlock);
 220
 221         platform_set_drvdata(pdev, dev);
 222
 223         /* Stop the DMA engine now, in case it was running before */
 224         /* (The firmware could have used it, and left it running). */
 225         /* To do this, we write Graceful Receive Stop and Graceful */
 226         /* Transmit Stop, and then wait until the corresponding bits */
 227         /* in IEVENT indicate the stops have completed. */
 228         tempval = gfar_read(&priv->regs->dmactrl);
 229         tempval &= ~(DMACTRL_GRS | DMACTRL_GTS);
 230         gfar_write(&priv->regs->dmactrl, tempval);
 231
 232         tempval = gfar_read(&priv->regs->dmactrl);
 233         tempval |= (DMACTRL_GRS | DMACTRL_GTS);
 234         gfar_write(&priv->regs->dmactrl, tempval);
 235
 236         while (!(gfar_read(&priv->regs->ievent) & (IEVENT_GRSC | IEVENT_GTSC)))
 237                 cpu_relax();
 238
 239         /* Reset MAC layer */
 240         gfar_write(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
 241
 242         tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
 243         gfar_write(&priv->regs->maccfg1, tempval);
 244
 245         /* Initialize MACCFG2. */
 246         gfar_write(&priv->regs->maccfg2, MACCFG2_INIT_SETTINGS);
 247
 248         /* Initialize ECNTRL */
 249         gfar_write(&priv->regs->ecntrl, ECNTRL_INIT_SETTINGS);
 250
 251         /* Copy the station address into the dev structure, */
 252         memcpy(dev->dev_addr, einfo->mac_addr, MAC_ADDR_LEN);
 253
 254         /* Set the dev->base_addr to the gfar reg region */
 255         dev->base_addr = (unsigned long) (priv->regs);
 256
 257         SET_NETDEV_DEV(dev, &pdev->dev);
 258
 259         /* Fill in the dev structure */
 260         dev->open = gfar_enet_open;
 261         dev->hard_start_xmit = gfar_start_xmit;
 262         dev->tx_timeout = gfar_timeout;
 263         dev->watchdog_timeo = TX_TIMEOUT;
 264         netif_napi_add(dev, &priv->napi, gfar_poll, GFAR_DEV_WEIGHT);
 265 #ifdef CONFIG_NET_POLL_CONTROLLER
 266         dev->poll_controller = gfar_netpoll;
 267 #endif
 268         dev->stop = gfar_close;
 269         dev->change_mtu = gfar_change_mtu;
 270         dev->mtu = 1500;
 271         dev->set_multicast_list = gfar_set_multi;
 272
 273         dev->ethtool_ops = &gfar_ethtool_ops;
 274
 275         if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) {
 276                 priv->rx_csum_enable = 1;
 277                 dev->features |= NETIF_F_IP_CSUM;
 278         } else
 279                 priv->rx_csum_enable = 0;
 280
 281         priv->vlgrp = NULL;
 282
 283         if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) {
 284                 dev->vlan_rx_register = gfar_vlan_rx_register;
 285
 286                 dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
 287
 288                 priv->vlan_enable = 1;
 289         }
 290
 291         if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) {
 292                 priv->extended_hash = 1;
 293                 priv->hash_width = 9;
 294
 295                 priv->hash_regs[0] = &priv->regs->igaddr0;
 296                 priv->hash_regs[1] = &priv->regs->igaddr1;
 297                 priv->hash_regs[2] = &priv->regs->igaddr2;
 298                 priv->hash_regs[3] = &priv->regs->igaddr3;
 299                 priv->hash_regs[4] = &priv->regs->igaddr4;
 300                 priv->hash_regs[5] = &priv->regs->igaddr5;
 301                 priv->hash_regs[6] = &priv->regs->igaddr6;
 302                 priv->hash_regs[7] = &priv->regs->igaddr7;
 303                 priv->hash_regs[8] = &priv->regs->gaddr0;
 304                 priv->hash_regs[9] = &priv->regs->gaddr1;
 305                 priv->hash_regs[10] = &priv->regs->gaddr2;
 306                 priv->hash_regs[11] = &priv->regs->gaddr3;
 307                 priv->hash_regs[12] = &priv->regs->gaddr4;
 308                 priv->hash_regs[13] = &priv->regs->gaddr5;
 309                 priv->hash_regs[14] = &priv->regs->gaddr6;
 310                 priv->hash_regs[15] = &priv->regs->gaddr7;
 311
 312         } else {
 313                 priv->extended_hash = 0;
 314                 priv->hash_width = 8;
 315
 316                 priv->hash_regs[0] = &priv->regs->gaddr0;
 317                 priv->hash_regs[1] = &priv->regs->gaddr1;
 318                 priv->hash_regs[2] = &priv->regs->gaddr2;
 319                 priv->hash_regs[3] = &priv->regs->gaddr3;
 320                 priv->hash_regs[4] = &priv->regs->gaddr4;
 321                 priv->hash_regs[5] = &priv->regs->gaddr5;
 322                 priv->hash_regs[6] = &priv->regs->gaddr6;
 323                 priv->hash_regs[7] = &priv->regs->gaddr7;
 324         }
 325
 326         if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_PADDING)
 327                 priv->padding = DEFAULT_PADDING;
 328         else
 329                 priv->padding = 0;
 330
 331         if (dev->features & NETIF_F_IP_CSUM)
 332                 dev->hard_header_len += GMAC_FCB_LEN;
 333
 334         priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE;
 335         priv->tx_ring_size = DEFAULT_TX_RING_SIZE;
 336         priv->rx_ring_size = DEFAULT_RX_RING_SIZE;
 337
 338         priv->txcoalescing = DEFAULT_TX_COALESCE;
 339         priv->txcount = DEFAULT_TXCOUNT;
 340         priv->txtime = DEFAULT_TXTIME;
 341         priv->rxcoalescing = DEFAULT_RX_COALESCE;
 342         priv->rxcount = DEFAULT_RXCOUNT;
 343         priv->rxtime = DEFAULT_RXTIME;
 344
 345         /* Enable most messages by default */
 346         priv->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1;
 347
 348         err = register_netdev(dev);
 349
 350         if (err) {
 351                 printk(KERN_ERR "%s: Cannot register net device, aborting.\n",
 352                                 dev->name);
 353                 goto register_fail;
 354         }
 355
 356         /* Create all the sysfs files */
 357         gfar_init_sysfs(dev);
 358
 359         /* Print out the device info */
 360         printk(KERN_INFO DEVICE_NAME "%s\n",
 361                dev->name, print_mac(mac, dev->dev_addr));
 362
 363         /* Even more device info helps when determining which kernel */
 364         /* provided which set of benchmarks. */
 365 #ifdef CONFIG_GFAR_NAPI
 366         printk(KERN_INFO "%s: Running with NAPI enabled\n", dev->name);
 367 #else
 368         printk(KERN_INFO "%s: Running with NAPI disabled\n", dev->name);
 369 #endif
 370         printk(KERN_INFO "%s: %d/%d RX/TX BD ring size\n",
 371                dev->name, priv->rx_ring_size, priv->tx_ring_size);
 372
 373         return 0;
 374
 375 register_fail:
 376         iounmap(priv->regs);
 377 regs_fail:
 378         free_netdev(dev);
 379         return err;
 380 }
 381
 382 static int gfar_remove(struct platform_device *pdev)
 383 {
 384         struct net_device *dev = platform_get_drvdata(pdev);
 385         struct gfar_private *priv = netdev_priv(dev);
 386
 387         platform_set_drvdata(pdev, NULL);
 388
 389         iounmap(priv->regs);
 390         free_netdev(dev);
 391
 392         return 0;
 393 }
 394
 395
 396 /* Reads the controller's registers to determine what interface
 397  * connects it to the PHY.
 398  */
 399 static phy_interface_t gfar_get_interface(struct net_device *dev)
 400 {
 401         struct gfar_private *priv = netdev_priv(dev);
 402         u32 ecntrl = gfar_read(&priv->regs->ecntrl);
 403
 404         if (ecntrl & ECNTRL_SGMII_MODE)
 405                 return PHY_INTERFACE_MODE_SGMII;
 406
 407         if (ecntrl & ECNTRL_TBI_MODE) {
 408                 if (ecntrl & ECNTRL_REDUCED_MODE)
 409                         return PHY_INTERFACE_MODE_RTBI;
 410                 else
 411                         return PHY_INTERFACE_MODE_TBI;
 412         }
 413
 414         if (ecntrl & ECNTRL_REDUCED_MODE) {
 415                 if (ecntrl & ECNTRL_REDUCED_MII_MODE)
 416                         return PHY_INTERFACE_MODE_RMII;
 417                 else {
 418                         phy_interface_t interface = priv->einfo->interface;
 419
 420                         /*
 421                          * This isn't autodetected right now, so it must
 422                          * be set by the device tree or platform code.
 423                          */
 424                         if (interface == PHY_INTERFACE_MODE_RGMII_ID)
 425                                 return PHY_INTERFACE_MODE_RGMII_ID;
 426
 427                         return PHY_INTERFACE_MODE_RGMII;
 428                 }
 429         }
 430
 431         if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT)
 432                 return PHY_INTERFACE_MODE_GMII;
 433
 434         return PHY_INTERFACE_MODE_MII;
 435 }
 436
 437
 438 /* Initializes driver's PHY state, and attaches to the PHY.
 439  * Returns 0 on success.
 440  */
 441 static int init_phy(struct net_device *dev)
 442 {
 443         struct gfar_private *priv = netdev_priv(dev);
 444         uint gigabit_support =
 445                 priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
 446                 SUPPORTED_1000baseT_Full : 0;
 447         struct phy_device *phydev;
 448         char phy_id[BUS_ID_SIZE];
 449         phy_interface_t interface;
 450
 451         priv->oldlink = 0;
 452         priv->oldspeed = 0;
 453         priv->oldduplex = -1;
 454
 455         snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, priv->einfo->bus_id, priv->einfo->phy_id);
 456
 457         interface = gfar_get_interface(dev);
 458
 459         phydev = phy_connect(dev, phy_id, &adjust_link, 0, interface);
 460
 461         if (interface == PHY_INTERFACE_MODE_SGMII)
 462                 gfar_configure_serdes(dev);
 463
 464         if (IS_ERR(phydev)) {
 465                 printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
 466                 return PTR_ERR(phydev);
 467         }
 468
 469         /* Remove any features not supported by the controller */
 470         phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
 471         phydev->advertising = phydev->supported;
 472
 473         priv->phydev = phydev;
 474
 475         return 0;
 476 }
 477
 478 static void gfar_configure_serdes(struct net_device *dev)
 479 {
 480         struct gfar_private *priv = netdev_priv(dev);
 481         struct gfar_mii __iomem *regs =
 482                         (void __iomem *)&priv->regs->gfar_mii_regs;
 483
 484         /* Initialise TBI i/f to communicate with serdes (lynx phy) */
 485
 486         /* Single clk mode, mii mode off(for aerdes communication) */
 487         gfar_local_mdio_write(regs, TBIPA_VALUE, MII_TBICON, TBICON_CLK_SELECT);
 488
 489         /* Supported pause and full-duplex, no half-duplex */
 490         gfar_local_mdio_write(regs, TBIPA_VALUE, MII_ADVERTISE,
 491                         ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE |
 492                         ADVERTISE_1000XPSE_ASYM);
 493
 494         /* ANEG enable, restart ANEG, full duplex mode, speed[1] set */
 495         gfar_local_mdio_write(regs, TBIPA_VALUE, MII_BMCR, BMCR_ANENABLE |
 496                         BMCR_ANRESTART | BMCR_FULLDPLX | BMCR_SPEED1000);
 497 }
 498
 499 static void init_registers(struct net_device *dev)
 500 {
 501         struct gfar_private *priv = netdev_priv(dev);
 502
 503         /* Clear IEVENT */
 504         gfar_write(&priv->regs->ievent, IEVENT_INIT_CLEAR);
 505
 506         /* Initialize IMASK */
 507         gfar_write(&priv->regs->imask, IMASK_INIT_CLEAR);
 508
 509         /* Init hash registers to zero */
 510         gfar_write(&priv->regs->igaddr0, 0);
 511         gfar_write(&priv->regs->igaddr1, 0);
 512         gfar_write(&priv->regs->igaddr2, 0);
 513         gfar_write(&priv->regs->igaddr3, 0);
 514         gfar_write(&priv->regs->igaddr4, 0);
 515         gfar_write(&priv->regs->igaddr5, 0);
 516         gfar_write(&priv->regs->igaddr6, 0);
 517         gfar_write(&priv->regs->igaddr7, 0);
 518
 519         gfar_write(&priv->regs->gaddr0, 0);
 520         gfar_write(&priv->regs->gaddr1, 0);
 521         gfar_write(&priv->regs->gaddr2, 0);
 522         gfar_write(&priv->regs->gaddr3, 0);
 523         gfar_write(&priv->regs->gaddr4, 0);
 524         gfar_write(&priv->regs->gaddr5, 0);
 525         gfar_write(&priv->regs->gaddr6, 0);
 526         gfar_write(&priv->regs->gaddr7, 0);
 527
 528         /* Zero out the rmon mib registers if it has them */
 529         if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
 530                 memset_io(&(priv->regs->rmon), 0, sizeof (struct rmon_mib));
 531
 532                 /* Mask off the CAM interrupts */
 533                 gfar_write(&priv->regs->rmon.cam1, 0xffffffff);
 534                 gfar_write(&priv->regs->rmon.cam2, 0xffffffff);
 535         }
 536
 537         /* Initialize the max receive buffer length */
 538         gfar_write(&priv->regs->mrblr, priv->rx_buffer_size);
 539
 540         /* Initialize the Minimum Frame Length Register */
 541         gfar_write(&priv->regs->minflr, MINFLR_INIT_SETTINGS);
 542
 543         /* Assign the TBI an address which won't conflict with the PHYs */
 544         gfar_write(&priv->regs->tbipa, TBIPA_VALUE);
 545 }
 546
 547
 548 /* Halt the receive and transmit queues */
 549 void gfar_halt(struct net_device *dev)
 550 {
 551         struct gfar_private *priv = netdev_priv(dev);
 552         struct gfar __iomem *regs = priv->regs;
 553         u32 tempval;
 554
 555         /* Mask all interrupts */
 556         gfar_write(&regs->imask, IMASK_INIT_CLEAR);
 557
 558         /* Clear all interrupts */
 559         gfar_write(&regs->ievent, IEVENT_INIT_CLEAR);
 560
 561         /* Stop the DMA, and wait for it to stop */
 562         tempval = gfar_read(&priv->regs->dmactrl);
 563         if ((tempval & (DMACTRL_GRS | DMACTRL_GTS))
 564             != (DMACTRL_GRS | DMACTRL_GTS)) {
 565                 tempval |= (DMACTRL_GRS | DMACTRL_GTS);
 566                 gfar_write(&priv->regs->dmactrl, tempval);
 567
 568                 while (!(gfar_read(&priv->regs->ievent) &
 569                          (IEVENT_GRSC | IEVENT_GTSC)))
 570                         cpu_relax();
 571         }
 572
 573         /* Disable Rx and Tx */
 574         tempval = gfar_read(&regs->maccfg1);
 575         tempval &= ~(MACCFG1_RX_EN | MACCFG1_TX_EN);
 576         gfar_write(&regs->maccfg1, tempval);
 577 }
 578
 579 void stop_gfar(struct net_device *dev)
 580 {
 581         struct gfar_private *priv = netdev_priv(dev);
 582         struct gfar __iomem *regs = priv->regs;
 583         unsigned long flags;
 584
 585         phy_stop(priv->phydev);
 586
 587         /* Lock it down */
 588         spin_lock_irqsave(&priv->txlock, flags);
 589         spin_lock(&priv->rxlock);
 590
 591         gfar_halt(dev);
 592
 593         spin_unlock(&priv->rxlock);
 594         spin_unlock_irqrestore(&priv->txlock, flags);
 595
 596         /* Free the IRQs */
 597         if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
 598                 free_irq(priv->interruptError, dev);
 599                 free_irq(priv->interruptTransmit, dev);
 600                 free_irq(priv->interruptReceive, dev);
 601         } else {
 602                 free_irq(priv->interruptTransmit, dev);
 603         }
 604
 605         free_skb_resources(priv);
 606
 607         dma_free_coherent(NULL,
 608                         sizeof(struct txbd8)*priv->tx_ring_size
 609                         + sizeof(struct rxbd8)*priv->rx_ring_size,
 610                         priv->tx_bd_base,
 611                         gfar_read(&regs->tbase0));
 612 }
 613
 614 /* If there are any tx skbs or rx skbs still around, free them.
 615  * Then free tx_skbuff and rx_skbuff */
 616 static void free_skb_resources(struct gfar_private *priv)
 617 {
 618         struct rxbd8 *rxbdp;
 619         struct txbd8 *txbdp;
 620         int i;
 621
 622         /* Go through all the buffer descriptors and free their data buffers */
 623         txbdp = priv->tx_bd_base;
 624
 625         for (i = 0; i < priv->tx_ring_size; i++) {
 626
 627                 if (priv->tx_skbuff[i]) {
 628                         dma_unmap_single(NULL, txbdp->bufPtr,
 629                                         txbdp->length,
 630                                         DMA_TO_DEVICE);
 631                         dev_kfree_skb_any(priv->tx_skbuff[i]);
 632                         priv->tx_skbuff[i] = NULL;
 633                 }
 634         }
 635
 636         kfree(priv->tx_skbuff);
 637
 638         rxbdp = priv->rx_bd_base;
 639
 640         /* rx_skbuff is not guaranteed to be allocated, so only
 641          * free it and its contents if it is allocated */
 642         if(priv->rx_skbuff != NULL) {
 643                 for (i = 0; i < priv->rx_ring_size; i++) {
 644                         if (priv->rx_skbuff[i]) {
 645                                 dma_unmap_single(NULL, rxbdp->bufPtr,
 646                                                 priv->rx_buffer_size,
 647                                                 DMA_FROM_DEVICE);
 648
 649                                 dev_kfree_skb_any(priv->rx_skbuff[i]);
 650                                 priv->rx_skbuff[i] = NULL;
 651                         }
 652
 653                         rxbdp->status = 0;
 654                         rxbdp->length = 0;
 655                         rxbdp->bufPtr = 0;
 656
 657                         rxbdp++;
 658                 }
 659
 660                 kfree(priv->rx_skbuff);
 661         }
 662 }
 663
 664 void gfar_start(struct net_device *dev)
 665 {
 666         struct gfar_private *priv = netdev_priv(dev);
 667         struct gfar __iomem *regs = priv->regs;
 668         u32 tempval;
 669
 670         /* Enable Rx and Tx in MACCFG1 */
 671         tempval = gfar_read(&regs->maccfg1);
 672         tempval |= (MACCFG1_RX_EN | MACCFG1_TX_EN);
 673         gfar_write(&regs->maccfg1, tempval);
 674
 675         /* Initialize DMACTRL to have WWR and WOP */
 676         tempval = gfar_read(&priv->regs->dmactrl);
 677         tempval |= DMACTRL_INIT_SETTINGS;
 678         gfar_write(&priv->regs->dmactrl, tempval);
 679
 680         /* Make sure we aren't stopped */
 681         tempval = gfar_read(&priv->regs->dmactrl);
 682         tempval &= ~(DMACTRL_GRS | DMACTRL_GTS);
 683         gfar_write(&priv->regs->dmactrl, tempval);
 684
 685         /* Clear THLT/RHLT, so that the DMA starts polling now */
 686         gfar_write(&regs->tstat, TSTAT_CLEAR_THALT);
 687         gfar_write(&regs->rstat, RSTAT_CLEAR_RHALT);
 688
 689         /* Unmask the interrupts we look for */
 690         gfar_write(&regs->imask, IMASK_DEFAULT);
 691 }
 692
 693 /* Bring the controller up and running */
 694 int startup_gfar(struct net_device *dev)
 695 {
 696         struct txbd8 *txbdp;
 697         struct rxbd8 *rxbdp;
 698         dma_addr_t addr;
 699         unsigned long vaddr;
 700         int i;
 701         struct gfar_private *priv = netdev_priv(dev);
 702         struct gfar __iomem *regs = priv->regs;
 703         int err = 0;
 704         u32 rctrl = 0;
 705         u32 attrs = 0;
 706
 707         gfar_write(&regs->imask, IMASK_INIT_CLEAR);
 708
 709         /* Allocate memory for the buffer descriptors */
 710         vaddr = (unsigned long) dma_alloc_coherent(NULL,
 711                         sizeof (struct txbd8) * priv->tx_ring_size +
 712                         sizeof (struct rxbd8) * priv->rx_ring_size,
 713                         &addr, GFP_KERNEL);
 714
 715         if (vaddr == 0) {
 716                 if (netif_msg_ifup(priv))
 717                         printk(KERN_ERR "%s: Could not allocate buffer descriptors!\n",
 718                                         dev->name);
 719                 return -ENOMEM;
 720         }
 721
 722         priv->tx_bd_base = (struct txbd8 *) vaddr;
 723
 724         /* enet DMA only understands physical addresses */
 725         gfar_write(&regs->tbase0, addr);
 726
 727         /* Start the rx descriptor ring where the tx ring leaves off */
 728         addr = addr + sizeof (struct txbd8) * priv->tx_ring_size;
 729         vaddr = vaddr + sizeof (struct txbd8) * priv->tx_ring_size;
 730         priv->rx_bd_base = (struct rxbd8 *) vaddr;
 731         gfar_write(&regs->rbase0, addr);
 732
 733         /* Setup the skbuff rings */
 734         priv->tx_skbuff =
 735             (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) *
 736                                         priv->tx_ring_size, GFP_KERNEL);
 737
 738         if (NULL == priv->tx_skbuff) {
 739                 if (netif_msg_ifup(priv))
 740                         printk(KERN_ERR "%s: Could not allocate tx_skbuff\n",
 741                                         dev->name);
 742                 err = -ENOMEM;
 743                 goto tx_skb_fail;
 744         }
 745
 746         for (i = 0; i < priv->tx_ring_size; i++)
 747                 priv->tx_skbuff[i] = NULL;
 748
 749         priv->rx_skbuff =
 750             (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) *
 751                                         priv->rx_ring_size, GFP_KERNEL);
 752
 753         if (NULL == priv->rx_skbuff) {
 754                 if (netif_msg_ifup(priv))
 755                         printk(KERN_ERR "%s: Could not allocate rx_skbuff\n",
 756                                         dev->name);
 757                 err = -ENOMEM;
 758                 goto rx_skb_fail;
 759         }
 760
 761         for (i = 0; i < priv->rx_ring_size; i++)
 762                 priv->rx_skbuff[i] = NULL;
 763
 764         /* Initialize some variables in our dev structure */
 765         priv->dirty_tx = priv->cur_tx = priv->tx_bd_base;
 766         priv->cur_rx = priv->rx_bd_base;
 767         priv->skb_curtx = priv->skb_dirtytx = 0;
 768         priv->skb_currx = 0;
 769
 770         /* Initialize Transmit Descriptor Ring */
 771         txbdp = priv->tx_bd_base;
 772         for (i = 0; i < priv->tx_ring_size; i++) {
 773                 txbdp->status = 0;
 774                 txbdp->length = 0;
 775                 txbdp->bufPtr = 0;
 776                 txbdp++;
 777         }
 778
 779         /* Set the last descriptor in the ring to indicate wrap */
 780         txbdp--;
 781         txbdp->status |= TXBD_WRAP;
 782
 783         rxbdp = priv->rx_bd_base;
 784         for (i = 0; i < priv->rx_ring_size; i++) {
 785                 struct sk_buff *skb = NULL;
 786
 787                 rxbdp->status = 0;
 788
 789                 skb = gfar_new_skb(dev, rxbdp);
 790
 791                 priv->rx_skbuff[i] = skb;
 792
 793                 rxbdp++;
 794         }
 795
 796         /* Set the last descriptor in the ring to wrap */
 797         rxbdp--;
 798         rxbdp->status |= RXBD_WRAP;
 799
 800         /* If the device has multiple interrupts, register for
 801          * them.  Otherwise, only register for the one */
 802         if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
 803                 /* Install our interrupt handlers for Error,
 804                  * Transmit, and Receive */
 805                 if (request_irq(priv->interruptError, gfar_error,
 806                                 0, "enet_error", dev) < 0) {
 807                         if (netif_msg_intr(priv))
 808                                 printk(KERN_ERR "%s: Can't get IRQ %d\n",
 809                                         dev->name, priv->interruptError);
 810
 811                         err = -1;
 812                         goto err_irq_fail;
 813                 }
 814
 815                 if (request_irq(priv->interruptTransmit, gfar_transmit,
 816                                 0, "enet_tx", dev) < 0) {
 817                         if (netif_msg_intr(priv))
 818                                 printk(KERN_ERR "%s: Can't get IRQ %d\n",
 819                                         dev->name, priv->interruptTransmit);
 820
 821                         err = -1;
 822
 823                         goto tx_irq_fail;
 824                 }
 825
 826                 if (request_irq(priv->interruptReceive, gfar_receive,
 827                                 0, "enet_rx", dev) < 0) {
 828                         if (netif_msg_intr(priv))
 829                                 printk(KERN_ERR "%s: Can't get IRQ %d (receive0)\n",
 830                                                 dev->name, priv->interruptReceive);
 831
 832                         err = -1;
 833                         goto rx_irq_fail;
 834                 }
 835         } else {
 836                 if (request_irq(priv->interruptTransmit, gfar_interrupt,
 837                                 0, "gfar_interrupt", dev) < 0) {
 838                         if (netif_msg_intr(priv))
 839                                 printk(KERN_ERR "%s: Can't get IRQ %d\n",
 840                                         dev->name, priv->interruptError);
 841
 842                         err = -1;
 843                         goto err_irq_fail;
 844                 }
 845         }
 846
 847         phy_start(priv->phydev);
 848
 849         /* Configure the coalescing support */
 850         if (priv->txcoalescing)
 851                 gfar_write(&regs->txic,
 852                            mk_ic_value(priv->txcount, priv->txtime));
 853         else
 854                 gfar_write(&regs->txic, 0);
 855
 856         if (priv->rxcoalescing)
 857                 gfar_write(&regs->rxic,
 858                            mk_ic_value(priv->rxcount, priv->rxtime));
 859         else
 860                 gfar_write(&regs->rxic, 0);
 861
 862         if (priv->rx_csum_enable)
 863                 rctrl |= RCTRL_CHECKSUMMING;
 864
 865         if (priv->extended_hash) {
 866                 rctrl |= RCTRL_EXTHASH;
 867
 868                 gfar_clear_exact_match(dev);
 869                 rctrl |= RCTRL_EMEN;
 870         }
 871
 872         if (priv->vlan_enable)
 873                 rctrl |= RCTRL_VLAN;
 874
 875         if (priv->padding) {
 876                 rctrl &= ~RCTRL_PAL_MASK;
 877                 rctrl |= RCTRL_PADDING(priv->padding);
 878         }
 879
 880         /* Init rctrl based on our settings */
 881         gfar_write(&priv->regs->rctrl, rctrl);
 882
 883         if (dev->features & NETIF_F_IP_CSUM)
 884                 gfar_write(&priv->regs->tctrl, TCTRL_INIT_CSUM);
 885
 886         /* Set the extraction length and index */
 887         attrs = ATTRELI_EL(priv->rx_stash_size) |
 888                 ATTRELI_EI(priv->rx_stash_index);
 889
 890         gfar_write(&priv->regs->attreli, attrs);
 891
 892         /* Start with defaults, and add stashing or locking
 893          * depending on the approprate variables */
 894         attrs = ATTR_INIT_SETTINGS;
 895
 896         if (priv->bd_stash_en)
 897                 attrs |= ATTR_BDSTASH;
 898
 899         if (priv->rx_stash_size != 0)
 900                 attrs |= ATTR_BUFSTASH;
 901
 902         gfar_write(&priv->regs->attr, attrs);
 903
 904         gfar_write(&priv->regs->fifo_tx_thr, priv->fifo_threshold);
 905         gfar_write(&priv->regs->fifo_tx_starve, priv->fifo_starve);
 906         gfar_write(&priv->regs->fifo_tx_starve_shutoff, priv->fifo_starve_off);
 907
 908         /* Start the controller */
 909         gfar_start(dev);
 910
 911         return 0;
 912
 913 rx_irq_fail:
 914         free_irq(priv->interruptTransmit, dev);
 915 tx_irq_fail:
 916         free_irq(priv->interruptError, dev);
 917 err_irq_fail:
 918 rx_skb_fail:
 919         free_skb_resources(priv);
 920 tx_skb_fail:
 921         dma_free_coherent(NULL,
 922                         sizeof(struct txbd8)*priv->tx_ring_size
 923                         + sizeof(struct rxbd8)*priv->rx_ring_size,
 924                         priv->tx_bd_base,
 925                         gfar_read(&regs->tbase0));
 926
 927         return err;
 928 }
 929
 930 /* Called when something needs to use the ethernet device */
 931 /* Returns 0 for success. */
 932 static int gfar_enet_open(struct net_device *dev)
 933 {
 934         int err;
 935
 936         napi_enable(&priv->napi);
 937
 938         /* Initialize a bunch of registers */
 939         init_registers(dev);
 940
 941         gfar_set_mac_address(dev);
 942
 943         err = init_phy(dev);
 944
 945         if(err) {
 946                 napi_disable(&priv->napi);
 947                 return err;
 948         }
 949
 950         err = startup_gfar(dev);
 951         if (err)
 952                 napi_disable(&priv->napi);
 953
 954         netif_start_queue(dev);
 955
 956         return err;
 957 }
 958
 959 static inline struct txfcb *gfar_add_fcb(struct sk_buff *skb, struct txbd8 *bdp)
 960 {
 961         struct txfcb *fcb = (struct txfcb *)skb_push (skb, GMAC_FCB_LEN);
 962
 963         memset(fcb, 0, GMAC_FCB_LEN);
 964
 965         return fcb;
 966 }
 967
 968 static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb)
 969 {
 970         u8 flags = 0;
 971
 972         /* If we're here, it's a IP packet with a TCP or UDP
 973          * payload.  We set it to checksum, using a pseudo-header
 974          * we provide
 975          */
 976         flags = TXFCB_DEFAULT;
 977
 978         /* Tell the controller what the protocol is */
 979         /* And provide the already calculated phcs */
 980         if (ip_hdr(skb)->protocol == IPPROTO_UDP) {
 981                 flags |= TXFCB_UDP;
 982                 fcb->phcs = udp_hdr(skb)->check;
 983         } else
 984                 fcb->phcs = tcp_hdr(skb)->check;
 985
 986         /* l3os is the distance between the start of the
 987          * frame (skb->data) and the start of the IP hdr.
 988          * l4os is the distance between the start of the
 989          * l3 hdr and the l4 hdr */
 990         fcb->l3os = (u16)(skb_network_offset(skb) - GMAC_FCB_LEN);
 991         fcb->l4os = skb_network_header_len(skb);
 992
 993         fcb->flags = flags;
 994 }
 995
 996 void inline gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb)
 997 {
 998         fcb->flags |= TXFCB_VLN;
 999         fcb->vlctl = vlan_tx_tag_get(skb);
1000 }
1001
1002 /* This is called by the kernel when a frame is ready for transmission. */
1003 /* It is pointed to by the dev->hard_start_xmit function pointer */
1004 static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
1005 {
1006         struct gfar_private *priv = netdev_priv(dev);
1007         struct txfcb *fcb = NULL;
1008         struct txbd8 *txbdp;
1009         u16 status;
1010         unsigned long flags;
1011
1012         /* Update transmit stats */
1013         dev->stats.tx_bytes += skb->len;
1014
1015         /* Lock priv now */
1016         spin_lock_irqsave(&priv->txlock, flags);
1017
1018         /* Point at the first free tx descriptor */
1019         txbdp = priv->cur_tx;
1020
1021         /* Clear all but the WRAP status flags */
1022         status = txbdp->status & TXBD_WRAP;
1023
1024         /* Set up checksumming */
1025         if (likely((dev->features & NETIF_F_IP_CSUM)
1026                         && (CHECKSUM_PARTIAL == skb->ip_summed))) {
1027                 fcb = gfar_add_fcb(skb, txbdp);
1028                 status |= TXBD_TOE;
1029                 gfar_tx_checksum(skb, fcb);
1030         }
1031
1032         if (priv->vlan_enable &&
1033                         unlikely(priv->vlgrp && vlan_tx_tag_present(skb))) {
1034                 if (unlikely(NULL == fcb)) {
1035                         fcb = gfar_add_fcb(skb, txbdp);
1036                         status |= TXBD_TOE;
1037                 }
1038
1039                 gfar_tx_vlan(skb, fcb);
1040         }
1041
1042         /* Set buffer length and pointer */
1043         txbdp->length = skb->len;
1044         txbdp->bufPtr = dma_map_single(NULL, skb->data,
1045                         skb->len, DMA_TO_DEVICE);
1046
1047         /* Save the skb pointer so we can free it later */
1048         priv->tx_skbuff[priv->skb_curtx] = skb;
1049
1050         /* Update the current skb pointer (wrapping if this was the last) */
1051         priv->skb_curtx =
1052             (priv->skb_curtx + 1) & TX_RING_MOD_MASK(priv->tx_ring_size);
1053
1054         /* Flag the BD as interrupt-causing */
1055         status |= TXBD_INTERRUPT;
1056
1057         /* Flag the BD as ready to go, last in frame, and  */
1058         /* in need of CRC */
1059         status |= (TXBD_READY | TXBD_LAST | TXBD_CRC);
1060
1061         dev->trans_start = jiffies;
1062
1063         /* The powerpc-specific eieio() is used, as wmb() has too strong
1064          * semantics (it requires synchronization between cacheable and
1065          * uncacheable mappings, which eieio doesn't provide and which we
1066          * don't need), thus requiring a more expensive sync instruction.  At
1067          * some point, the set of architecture-independent barrier functions
1068          * should be expanded to include weaker barriers.
1069          */
1070
1071         eieio();
1072         txbdp->status = status;
1073
1074         /* If this was the last BD in the ring, the next one */
1075         /* is at the beginning of the ring */
1076         if (txbdp->status & TXBD_WRAP)
1077                 txbdp = priv->tx_bd_base;
1078         else
1079                 txbdp++;
1080
1081         /* If the next BD still needs to be cleaned up, then the bds
1082            are full.  We need to tell the kernel to stop sending us stuff. */
1083         if (txbdp == priv->dirty_tx) {
1084                 netif_stop_queue(dev);
1085
1086                 dev->stats.tx_fifo_errors++;
1087         }
1088
1089         /* Update the current txbd to the next one */
1090         priv->cur_tx = txbdp;
1091
1092         /* Tell the DMA to go go go */
1093         gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT);
1094
1095         /* Unlock priv */
1096         spin_unlock_irqrestore(&priv->txlock, flags);
1097
1098         return 0;
1099 }
1100
1101 /* Stops the kernel queue, and halts the controller */
1102 static int gfar_close(struct net_device *dev)
1103 {
1104         struct gfar_private *priv = netdev_priv(dev);
1105
1106         napi_disable(&priv->napi);
1107
1108         stop_gfar(dev);
1109
1110         /* Disconnect from the PHY */
1111         phy_disconnect(priv->phydev);
1112         priv->phydev = NULL;
1113
1114         netif_stop_queue(dev);
1115
1116         return 0;
1117 }
1118
1119 /* Changes the mac address if the controller is not running. */
1120 int gfar_set_mac_address(struct net_device *dev)
1121 {
1122         gfar_set_mac_for_addr(dev, 0, dev->dev_addr);
1123
1124         return 0;
1125 }
1126
1127
1128 /* Enables and disables VLAN insertion/extraction */
1129 static void gfar_vlan_rx_register(struct net_device *dev,
1130                 struct vlan_group *grp)
1131 {
1132         struct gfar_private *priv = netdev_priv(dev);
1133         unsigned long flags;
1134         u32 tempval;
1135
1136         spin_lock_irqsave(&priv->rxlock, flags);
1137
1138         priv->vlgrp = grp;
1139
1140         if (grp) {
1141                 /* Enable VLAN tag insertion */
1142                 tempval = gfar_read(&priv->regs->tctrl);
1143                 tempval |= TCTRL_VLINS;
1144
1145                 gfar_write(&priv->regs->tctrl, tempval);
1146
1147                 /* Enable VLAN tag extraction */
1148                 tempval = gfar_read(&priv->regs->rctrl);
1149                 tempval |= RCTRL_VLEX;
1150                 gfar_write(&priv->regs->rctrl, tempval);
1151         } else {
1152                 /* Disable VLAN tag insertion */
1153                 tempval = gfar_read(&priv->regs->tctrl);
1154                 tempval &= ~TCTRL_VLINS;
1155                 gfar_write(&priv->regs->tctrl, tempval);
1156
1157                 /* Disable VLAN tag extraction */
1158                 tempval = gfar_read(&priv->regs->rctrl);
1159                 tempval &= ~RCTRL_VLEX;
1160                 gfar_write(&priv->regs->rctrl, tempval);
1161         }
1162
1163         spin_unlock_irqrestore(&priv->rxlock, flags);
1164 }
1165
1166 static int gfar_change_mtu(struct net_device *dev, int new_mtu)
1167 {
1168         int tempsize, tempval;
1169         struct gfar_private *priv = netdev_priv(dev);
1170         int oldsize = priv->rx_buffer_size;
1171         int frame_size = new_mtu + ETH_HLEN;
1172
1173         if (priv->vlan_enable)
1174                 frame_size += VLAN_ETH_HLEN;
1175
1176         if (gfar_uses_fcb(priv))
1177                 frame_size += GMAC_FCB_LEN;
1178
1179         frame_size += priv->padding;
1180
1181         if ((frame_size < 64) || (frame_size > JUMBO_FRAME_SIZE)) {
1182                 if (netif_msg_drv(priv))
1183                         printk(KERN_ERR "%s: Invalid MTU setting\n",
1184                                         dev->name);
1185                 return -EINVAL;
1186         }
1187
1188         tempsize =
1189             (frame_size & ~(INCREMENTAL_BUFFER_SIZE - 1)) +
1190             INCREMENTAL_BUFFER_SIZE;
1191
1192         /* Only stop and start the controller if it isn't already
1193          * stopped, and we changed something */
1194         if ((oldsize != tempsize) && (dev->flags & IFF_UP))
1195                 stop_gfar(dev);
1196
1197         priv->rx_buffer_size = tempsize;
1198
1199         dev->mtu = new_mtu;
1200
1201         gfar_write(&priv->regs->mrblr, priv->rx_buffer_size);
1202         gfar_write(&priv->regs->maxfrm, priv->rx_buffer_size);
1203
1204         /* If the mtu is larger than the max size for standard
1205          * ethernet frames (ie, a jumbo frame), then set maccfg2
1206          * to allow huge frames, and to check the length */
1207         tempval = gfar_read(&priv->regs->maccfg2);
1208
1209         if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE)
1210                 tempval |= (MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);
1211         else
1212                 tempval &= ~(MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);
1213
1214         gfar_write(&priv->regs->maccfg2, tempval);
1215
1216         if ((oldsize != tempsize) && (dev->flags & IFF_UP))
1217                 startup_gfar(dev);
1218
1219         return 0;
1220 }
1221
1222 /* gfar_timeout gets called when a packet has not been
1223  * transmitted after a set amount of time.
1224  * For now, assume that clearing out all the structures, and
1225  * starting over will fix the problem. */
1226 static void gfar_timeout(struct net_device *dev)
1227 {
1228         struct gfar_private *priv = netdev_priv(dev);
1229
1230         dev->stats.tx_errors++;
1231
1232         if (dev->flags & IFF_UP) {
1233                 stop_gfar(dev);
1234                 startup_gfar(dev);
1235         }
1236
1237         netif_schedule(dev);
1238 }
1239
1240 /* Interrupt Handler for Transmit complete */
1241 static irqreturn_t gfar_transmit(int irq, void *dev_id)
1242 {
1243         struct net_device *dev = (struct net_device *) dev_id;
1244         struct gfar_private *priv = netdev_priv(dev);
1245         struct txbd8 *bdp;
1246
1247         /* Clear IEVENT */
1248         gfar_write(&priv->regs->ievent, IEVENT_TX_MASK);
1249
1250         /* Lock priv */
1251         spin_lock(&priv->txlock);
1252         bdp = priv->dirty_tx;
1253         while ((bdp->status & TXBD_READY) == 0) {
1254                 /* If dirty_tx and cur_tx are the same, then either the */
1255                 /* ring is empty or full now (it could only be full in the beginning, */
1256                 /* obviously).  If it is empty, we are done. */
1257                 if ((bdp == priv->cur_tx) && (netif_queue_stopped(dev) == 0))
1258                         break;
1259
1260                 dev->stats.tx_packets++;
1261
1262                 /* Deferred means some collisions occurred during transmit, */
1263                 /* but we eventually sent the packet. */
1264                 if (bdp->status & TXBD_DEF)
1265                         dev->stats.collisions++;
1266
1267                 /* Free the sk buffer associated with this TxBD */
1268                 dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]);
1269                 priv->tx_skbuff[priv->skb_dirtytx] = NULL;
1270                 priv->skb_dirtytx =
1271                     (priv->skb_dirtytx +
1272                      1) & TX_RING_MOD_MASK(priv->tx_ring_size);
1273
1274                 /* update bdp to point at next bd in the ring (wrapping if necessary) */
1275                 if (bdp->status & TXBD_WRAP)
1276                         bdp = priv->tx_bd_base;
1277                 else
1278                         bdp++;
1279
1280                 /* Move dirty_tx to be the next bd */
1281                 priv->dirty_tx = bdp;
1282
1283                 /* We freed a buffer, so now we can restart transmission */
1284                 if (netif_queue_stopped(dev))
1285                         netif_wake_queue(dev);
1286         } /* while ((bdp->status & TXBD_READY) == 0) */
1287
1288         /* If we are coalescing the interrupts, reset the timer */
1289         /* Otherwise, clear it */
1290         if (priv->txcoalescing)
1291                 gfar_write(&priv->regs->txic,
1292                            mk_ic_value(priv->txcount, priv->txtime));
1293         else
1294                 gfar_write(&priv->regs->txic, 0);
1295
1296         spin_unlock(&priv->txlock);
1297
1298         return IRQ_HANDLED;
1299 }
1300
1301 struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
1302 {
1303         unsigned int alignamount;
1304         struct gfar_private *priv = netdev_priv(dev);
1305         struct sk_buff *skb = NULL;
1306         unsigned int timeout = SKB_ALLOC_TIMEOUT;
1307
1308         /* We have to allocate the skb, so keep trying till we succeed */
1309         while ((!skb) && timeout--)
1310                 skb = dev_alloc_skb(priv->rx_buffer_size + RXBUF_ALIGNMENT);
1311
1312         if (NULL == skb)
1313                 return NULL;
1314
1315         alignamount = RXBUF_ALIGNMENT -
1316                 (((unsigned long) skb->data) & (RXBUF_ALIGNMENT - 1));
1317
1318         /* We need the data buffer to be aligned properly.  We will reserve
1319          * as many bytes as needed to align the data properly
1320          */
1321         skb_reserve(skb, alignamount);
1322
1323         bdp->bufPtr = dma_map_single(NULL, skb->data,
1324                         priv->rx_buffer_size, DMA_FROM_DEVICE);
1325
1326         bdp->length = 0;
1327
1328         /* Mark the buffer empty */
1329         eieio();
1330         bdp->status |= (RXBD_EMPTY | RXBD_INTERRUPT);
1331
1332         return skb;
1333 }
1334
1335 static inline void count_errors(unsigned short status, struct gfar_private *priv)
1336 {
1337         struct net_device_stats *stats = &dev->stats;
1338         struct gfar_extra_stats *estats = &priv->extra_stats;
1339
1340         /* If the packet was truncated, none of the other errors
1341          * matter */
1342         if (status & RXBD_TRUNCATED) {
1343                 stats->rx_length_errors++;
1344
1345                 estats->rx_trunc++;
1346
1347                 return;
1348         }
1349         /* Count the errors, if there were any */
1350         if (status & (RXBD_LARGE | RXBD_SHORT)) {
1351                 stats->rx_length_errors++;
1352
1353                 if (status & RXBD_LARGE)
1354                         estats->rx_large++;
1355                 else
1356                         estats->rx_short++;
1357         }
1358         if (status & RXBD_NONOCTET) {
1359                 stats->rx_frame_errors++;
1360                 estats->rx_nonoctet++;
1361         }
1362         if (status & RXBD_CRCERR) {
1363                 estats->rx_crcerr++;
1364                 stats->rx_crc_errors++;
1365         }
1366         if (status & RXBD_OVERRUN) {
1367                 estats->rx_overrun++;
1368                 stats->rx_crc_errors++;
1369         }
1370 }
1371
1372 irqreturn_t gfar_receive(int irq, void *dev_id)
1373 {
1374         struct net_device *dev = (struct net_device *) dev_id;
1375         struct gfar_private *priv = netdev_priv(dev);
1376 #ifdef CONFIG_GFAR_NAPI
1377         u32 tempval;
1378 #else
1379         unsigned long flags;
1380 #endif
1381
1382         /* Clear IEVENT, so rx interrupt isn't called again
1383          * because of this interrupt */
1384         gfar_write(&priv->regs->ievent, IEVENT_RX_MASK);
1385
1386         /* support NAPI */
1387 #ifdef CONFIG_GFAR_NAPI
1388         if (netif_rx_schedule_prep(dev, &priv->napi)) {
1389                 tempval = gfar_read(&priv->regs->imask);
1390                 tempval &= IMASK_RX_DISABLED;
1391                 gfar_write(&priv->regs->imask, tempval);
1392
1393                 __netif_rx_schedule(dev, &priv->napi);
1394         } else {
1395                 if (netif_msg_rx_err(priv))
1396                         printk(KERN_DEBUG "%s: receive called twice (%x)[%x]\n",
1397                                 dev->name, gfar_read(&priv->regs->ievent),
1398                                 gfar_read(&priv->regs->imask));
1399         }
1400 #else
1401
1402         spin_lock_irqsave(&priv->rxlock, flags);
1403         gfar_clean_rx_ring(dev, priv->rx_ring_size);
1404
1405         /* If we are coalescing interrupts, update the timer */
1406         /* Otherwise, clear it */
1407         if (priv->rxcoalescing)
1408                 gfar_write(&priv->regs->rxic,
1409                            mk_ic_value(priv->rxcount, priv->rxtime));
1410         else
1411                 gfar_write(&priv->regs->rxic, 0);
1412
1413         spin_unlock_irqrestore(&priv->rxlock, flags);
1414 #endif
1415
1416         return IRQ_HANDLED;
1417 }
1418
1419 static inline int gfar_rx_vlan(struct sk_buff *skb,
1420                 struct vlan_group *vlgrp, unsigned short vlctl)
1421 {
1422 #ifdef CONFIG_GFAR_NAPI
1423         return vlan_hwaccel_receive_skb(skb, vlgrp, vlctl);
1424 #else
1425         return vlan_hwaccel_rx(skb, vlgrp, vlctl);
1426 #endif
1427 }
1428
1429 static inline void gfar_rx_checksum(struct sk_buff *skb, struct rxfcb *fcb)
1430 {
1431         /* If valid headers were found, and valid sums
1432          * were verified, then we tell the kernel that no
1433          * checksumming is necessary.  Otherwise, it is */
1434         if ((fcb->flags & RXFCB_CSUM_MASK) == (RXFCB_CIP | RXFCB_CTU))
1435                 skb->ip_summed = CHECKSUM_UNNECESSARY;
1436         else
1437                 skb->ip_summed = CHECKSUM_NONE;
1438 }
1439
1440
1441 static inline struct rxfcb *gfar_get_fcb(struct sk_buff *skb)
1442 {
1443         struct rxfcb *fcb = (struct rxfcb *)skb->data;
1444
1445         /* Remove the FCB from the skb */
1446         skb_pull(skb, GMAC_FCB_LEN);
1447
1448         return fcb;
1449 }
1450
1451 /* gfar_process_frame() -- handle one incoming packet if skb
1452  * isn't NULL.  */
1453 static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
1454                 int length)
1455 {
1456         struct gfar_private *priv = netdev_priv(dev);
1457         struct rxfcb *fcb = NULL;
1458
1459         if (NULL == skb) {
1460                 if (netif_msg_rx_err(priv))
1461                         printk(KERN_WARNING "%s: Missing skb!!.\n", dev->name);
1462                 dev->stats.rx_dropped++;
1463                 priv->extra_stats.rx_skbmissing++;
1464         } else {
1465                 int ret;
1466
1467                 /* Prep the skb for the packet */
1468                 skb_put(skb, length);
1469
1470                 /* Grab the FCB if there is one */
1471                 if (gfar_uses_fcb(priv))
1472                         fcb = gfar_get_fcb(skb);
1473
1474                 /* Remove the padded bytes, if there are any */
1475                 if (priv->padding)
1476                         skb_pull(skb, priv->padding);
1477
1478                 if (priv->rx_csum_enable)
1479                         gfar_rx_checksum(skb, fcb);
1480
1481                 /* Tell the skb what kind of packet this is */
1482                 skb->protocol = eth_type_trans(skb, dev);
1483
1484                 /* Send the packet up the stack */
1485                 if (unlikely(priv->vlgrp && (fcb->flags & RXFCB_VLN)))
1486                         ret = gfar_rx_vlan(skb, priv->vlgrp, fcb->vlctl);
1487                 else
1488                         ret = RECEIVE(skb);
1489
1490                 if (NET_RX_DROP == ret)
1491                         priv->extra_stats.kernel_dropped++;
1492         }
1493
1494         return 0;
1495 }
1496
1497 /* gfar_clean_rx_ring() -- Processes each frame in the rx ring
1498  *   until the budget/quota has been reached. Returns the number
1499  *   of frames handled
1500  */
1501 int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
1502 {
1503         struct rxbd8 *bdp;
1504         struct sk_buff *skb;
1505         u16 pkt_len;
1506         int howmany = 0;
1507         struct gfar_private *priv = netdev_priv(dev);
1508
1509         /* Get the first full descriptor */
1510         bdp = priv->cur_rx;
1511
1512         while (!((bdp->status & RXBD_EMPTY) || (--rx_work_limit < 0))) {
1513                 rmb();
1514                 skb = priv->rx_skbuff[priv->skb_currx];
1515
1516                 if (!(bdp->status &
1517                       (RXBD_LARGE | RXBD_SHORT | RXBD_NONOCTET
1518                        | RXBD_CRCERR | RXBD_OVERRUN | RXBD_TRUNCATED))) {
1519                         /* Increment the number of packets */
1520                         dev->stats.rx_packets++;
1521                         howmany++;
1522
1523                         /* Remove the FCS from the packet length */
1524                         pkt_len = bdp->length - 4;
1525
1526                         gfar_process_frame(dev, skb, pkt_len);
1527
1528                         dev->stats.rx_bytes += pkt_len;
1529                 } else {
1530                         count_errors(bdp->status, priv);
1531
1532                         if (skb)
1533                                 dev_kfree_skb_any(skb);
1534
1535                         priv->rx_skbuff[priv->skb_currx] = NULL;
1536                 }
1537
1538                 dev->last_rx = jiffies;
1539
1540                 /* Clear the status flags for this buffer */
1541                 bdp->status &= ~RXBD_STATS;
1542
1543                 /* Add another skb for the future */
1544                 skb = gfar_new_skb(dev, bdp);
1545                 priv->rx_skbuff[priv->skb_currx] = skb;
1546
1547                 /* Update to the next pointer */
1548                 if (bdp->status & RXBD_WRAP)
1549                         bdp = priv->rx_bd_base;
1550                 else
1551                         bdp++;
1552
1553                 /* update to point at the next skb */
1554                 priv->skb_currx =
1555                     (priv->skb_currx +
1556                      1) & RX_RING_MOD_MASK(priv->rx_ring_size);
1557
1558         }
1559
1560         /* Update the current rxbd pointer to be the next one */
1561         priv->cur_rx = bdp;
1562
1563         return howmany;
1564 }
1565
1566 #ifdef CONFIG_GFAR_NAPI
1567 static int gfar_poll(struct napi_struct *napi, int budget)
1568 {
1569         struct gfar_private *priv = container_of(napi, struct gfar_private, napi);
1570         struct net_device *dev = priv->dev;
1571         int howmany;
1572
1573         howmany = gfar_clean_rx_ring(dev, budget);
1574
1575         if (howmany < budget) {
1576                 netif_rx_complete(dev, napi);
1577
1578                 /* Clear the halt bit in RSTAT */
1579                 gfar_write(&priv->regs->rstat, RSTAT_CLEAR_RHALT);
1580
1581                 gfar_write(&priv->regs->imask, IMASK_DEFAULT);
1582
1583                 /* If we are coalescing interrupts, update the timer */
1584                 /* Otherwise, clear it */
1585                 if (priv->rxcoalescing)
1586                         gfar_write(&priv->regs->rxic,
1587                                    mk_ic_value(priv->rxcount, priv->rxtime));
1588                 else
1589                         gfar_write(&priv->regs->rxic, 0);
1590         }
1591
1592         return howmany;
1593 }
1594 #endif
1595
1596 #ifdef CONFIG_NET_POLL_CONTROLLER
1597 /*
1598  * Polling 'interrupt' - used by things like netconsole to send skbs
1599  * without having to re-enable interrupts. It's not called while
1600  * the interrupt routine is executing.
1601  */
1602 static void gfar_netpoll(struct net_device *dev)
1603 {
1604         struct gfar_private *priv = netdev_priv(dev);
1605
1606         /* If the device has multiple interrupts, run tx/rx */
1607         if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
1608                 disable_irq(priv->interruptTransmit);
1609                 disable_irq(priv->interruptReceive);
1610                 disable_irq(priv->interruptError);
1611                 gfar_interrupt(priv->interruptTransmit, dev);
1612                 enable_irq(priv->interruptError);
1613                 enable_irq(priv->interruptReceive);
1614                 enable_irq(priv->interruptTransmit);
1615         } else {
1616                 disable_irq(priv->interruptTransmit);
1617                 gfar_interrupt(priv->interruptTransmit, dev);
1618                 enable_irq(priv->interruptTransmit);
1619         }
1620 }
1621 #endif
1622
1623 /* The interrupt handler for devices with one interrupt */
1624 static irqreturn_t gfar_interrupt(int irq, void *dev_id)
1625 {
1626         struct net_device *dev = dev_id;
1627         struct gfar_private *priv = netdev_priv(dev);
1628
1629         /* Save ievent for future reference */
1630         u32 events = gfar_read(&priv->regs->ievent);
1631
1632         /* Check for reception */
1633         if (events & IEVENT_RX_MASK)
1634                 gfar_receive(irq, dev_id);
1635
1636         /* Check for transmit completion */
1637         if (events & IEVENT_TX_MASK)
1638                 gfar_transmit(irq, dev_id);
1639
1640         /* Check for errors */
1641         if (events & IEVENT_ERR_MASK)
1642                 gfar_error(irq, dev_id);
1643
1644         return IRQ_HANDLED;
1645 }
1646
1647 /* Called every time the controller might need to be made
1648  * aware of new link state.  The PHY code conveys this
1649  * information through variables in the phydev structure, and this
1650  * function converts those variables into the appropriate
1651  * register values, and can bring down the device if needed.
1652  */
1653 static void adjust_link(struct net_device *dev)
1654 {
1655         struct gfar_private *priv = netdev_priv(dev);
1656         struct gfar __iomem *regs = priv->regs;
1657         unsigned long flags;
1658         struct phy_device *phydev = priv->phydev;
1659         int new_state = 0;
1660
1661         spin_lock_irqsave(&priv->txlock, flags);
1662         if (phydev->link) {
1663                 u32 tempval = gfar_read(&regs->maccfg2);
1664                 u32 ecntrl = gfar_read(&regs->ecntrl);
1665
1666                 /* Now we make sure that we can be in full duplex mode.
1667                  * If not, we operate in half-duplex mode. */
1668                 if (phydev->duplex != priv->oldduplex) {
1669                         new_state = 1;
1670                         if (!(phydev->duplex))
1671                                 tempval &= ~(MACCFG2_FULL_DUPLEX);
1672                         else
1673                                 tempval |= MACCFG2_FULL_DUPLEX;
1674
1675                         priv->oldduplex = phydev->duplex;
1676                 }
1677
1678                 if (phydev->speed != priv->oldspeed) {
1679                         new_state = 1;
1680                         switch (phydev->speed) {
1681                         case 1000:
1682                                 tempval =
1683                                     ((tempval & ~(MACCFG2_IF)) | MACCFG2_GMII);
1684                                 break;
1685                         case 100:
1686                         case 10:
1687                                 tempval =
1688                                     ((tempval & ~(MACCFG2_IF)) | MACCFG2_MII);
1689
1690                                 /* Reduced mode distinguishes
1691                                  * between 10 and 100 */
1692                                 if (phydev->speed == SPEED_100)
1693                                         ecntrl |= ECNTRL_R100;
1694                                 else
1695                                         ecntrl &= ~(ECNTRL_R100);
1696                                 break;
1697                         default:
1698                                 if (netif_msg_link(priv))
1699                                         printk(KERN_WARNING
1700                                                 "%s: Ack!  Speed (%d) is not 10/100/1000!\n",
1701                                                 dev->name, phydev->speed);
1702                                 break;
1703                         }
1704
1705                         priv->oldspeed = phydev->speed;
1706                 }
1707
1708                 gfar_write(&regs->maccfg2, tempval);
1709                 gfar_write(&regs->ecntrl, ecntrl);
1710
1711                 if (!priv->oldlink) {
1712                         new_state = 1;
1713                         priv->oldlink = 1;
1714                         netif_schedule(dev);
1715                 }
1716         } else if (priv->oldlink) {
1717                 new_state = 1;
1718                 priv->oldlink = 0;
1719                 priv->oldspeed = 0;
1720                 priv->oldduplex = -1;
1721         }
1722
1723         if (new_state && netif_msg_link(priv))
1724                 phy_print_status(phydev);
1725
1726         spin_unlock_irqrestore(&priv->txlock, flags);
1727 }
1728
1729 /* Update the hash table based on the current list of multicast
1730  * addresses we subscribe to.  Also, change the promiscuity of
1731  * the device based on the flags (this function is called
1732  * whenever dev->flags is changed */
1733 static void gfar_set_multi(struct net_device *dev)
1734 {
1735         struct dev_mc_list *mc_ptr;
1736         struct gfar_private *priv = netdev_priv(dev);
1737         struct gfar __iomem *regs = priv->regs;
1738         u32 tempval;
1739
1740         if(dev->flags & IFF_PROMISC) {
1741                 /* Set RCTRL to PROM */
1742                 tempval = gfar_read(&regs->rctrl);
1743                 tempval |= RCTRL_PROM;
1744                 gfar_write(&regs->rctrl, tempval);
1745         } else {
1746                 /* Set RCTRL to not PROM */
1747                 tempval = gfar_read(&regs->rctrl);
1748                 tempval &= ~(RCTRL_PROM);
1749                 gfar_write(&regs->rctrl, tempval);
1750         }
1751
1752         if(dev->flags & IFF_ALLMULTI) {
1753                 /* Set the hash to rx all multicast frames */
1754                 gfar_write(&regs->igaddr0, 0xffffffff);
1755                 gfar_write(&regs->igaddr1, 0xffffffff);
1756                 gfar_write(&regs->igaddr2, 0xffffffff);
1757                 gfar_write(&regs->igaddr3, 0xffffffff);
1758                 gfar_write(&regs->igaddr4, 0xffffffff);
1759                 gfar_write(&regs->igaddr5, 0xffffffff);
1760                 gfar_write(&regs->igaddr6, 0xffffffff);
1761                 gfar_write(&regs->igaddr7, 0xffffffff);
1762                 gfar_write(&regs->gaddr0, 0xffffffff);
1763                 gfar_write(&regs->gaddr1, 0xffffffff);
1764                 gfar_write(&regs->gaddr2, 0xffffffff);
1765                 gfar_write(&regs->gaddr3, 0xffffffff);
1766                 gfar_write(&regs->gaddr4, 0xffffffff);
1767                 gfar_write(&regs->gaddr5, 0xffffffff);
1768                 gfar_write(&regs->gaddr6, 0xffffffff);
1769                 gfar_write(&regs->gaddr7, 0xffffffff);
1770         } else {
1771                 int em_num;
1772                 int idx;
1773
1774                 /* zero out the hash */
1775                 gfar_write(&regs->igaddr0, 0x0);
1776                 gfar_write(&regs->igaddr1, 0x0);
1777                 gfar_write(&regs->igaddr2, 0x0);
1778                 gfar_write(&regs->igaddr3, 0x0);
1779                 gfar_write(&regs->igaddr4, 0x0);
1780                 gfar_write(&regs->igaddr5, 0x0);
1781                 gfar_write(&regs->igaddr6, 0x0);
1782                 gfar_write(&regs->igaddr7, 0x0);
1783                 gfar_write(&regs->gaddr0, 0x0);
1784                 gfar_write(&regs->gaddr1, 0x0);
1785                 gfar_write(&regs->gaddr2, 0x0);
1786                 gfar_write(&regs->gaddr3, 0x0);
1787                 gfar_write(&regs->gaddr4, 0x0);
1788                 gfar_write(&regs->gaddr5, 0x0);
1789                 gfar_write(&regs->gaddr6, 0x0);
1790                 gfar_write(&regs->gaddr7, 0x0);
1791
1792                 /* If we have extended hash tables, we need to
1793                  * clear the exact match registers to prepare for
1794                  * setting them */
1795                 if (priv->extended_hash) {
1796                         em_num = GFAR_EM_NUM + 1;
1797                         gfar_clear_exact_match(dev);
1798                         idx = 1;
1799                 } else {
1800                         idx = 0;
1801                         em_num = 0;
1802                 }
1803
1804                 if(dev->mc_count == 0)
1805                         return;
1806
1807                 /* Parse the list, and set the appropriate bits */
1808                 for(mc_ptr = dev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
1809                         if (idx < em_num) {
1810                                 gfar_set_mac_for_addr(dev, idx,
1811                                                 mc_ptr->dmi_addr);
1812                                 idx++;
1813                         } else
1814                                 gfar_set_hash_for_addr(dev, mc_ptr->dmi_addr);
1815                 }
1816         }
1817
1818         return;
1819 }
1820
1821
1822 /* Clears each of the exact match registers to zero, so they
1823  * don't interfere with normal reception */
1824 static void gfar_clear_exact_match(struct net_device *dev)
1825 {
1826         int idx;
1827         u8 zero_arr[MAC_ADDR_LEN] = {0,0,0,0,0,0};
1828
1829         for(idx = 1;idx < GFAR_EM_NUM + 1;idx++)
1830                 gfar_set_mac_for_addr(dev, idx, (u8 *)zero_arr);
1831 }
1832
1833 /* Set the appropriate hash bit for the given addr */
1834 /* The algorithm works like so:
1835  * 1) Take the Destination Address (ie the multicast address), and
1836  * do a CRC on it (little endian), and reverse the bits of the
1837  * result.
1838  * 2) Use the 8 most significant bits as a hash into a 256-entry
1839  * table.  The table is controlled through 8 32-bit registers:
1840  * gaddr0-7.  gaddr0's MSB is entry 0, and gaddr7's LSB is
1841  * gaddr7.  This means that the 3 most significant bits in the
1842  * hash index which gaddr register to use, and the 5 other bits
1843  * indicate which bit (assuming an IBM numbering scheme, which
1844  * for PowerPC (tm) is usually the case) in the register holds
1845  * the entry. */
1846 static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr)
1847 {
1848         u32 tempval;
1849         struct gfar_private *priv = netdev_priv(dev);
1850         u32 result = ether_crc(MAC_ADDR_LEN, addr);
1851         int width = priv->hash_width;
1852         u8 whichbit = (result >> (32 - width)) & 0x1f;
1853         u8 whichreg = result >> (32 - width + 5);
1854         u32 value = (1 << (31-whichbit));
1855
1856         tempval = gfar_read(priv->hash_regs[whichreg]);
1857         tempval |= value;
1858         gfar_write(priv->hash_regs[whichreg], tempval);
1859
1860         return;
1861 }
1862
1863
1864 /* There are multiple MAC Address register pairs on some controllers
1865  * This function sets the numth pair to a given address
1866  */
1867 static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr)
1868 {
1869         struct gfar_private *priv = netdev_priv(dev);
1870         int idx;
1871         char tmpbuf[MAC_ADDR_LEN];
1872         u32 tempval;
1873         u32 __iomem *macptr = &priv->regs->macstnaddr1;
1874
1875         macptr += num*2;
1876
1877         /* Now copy it into the mac registers backwards, cuz */
1878         /* little endian is silly */
1879         for (idx = 0; idx < MAC_ADDR_LEN; idx++)
1880                 tmpbuf[MAC_ADDR_LEN - 1 - idx] = addr[idx];
1881
1882         gfar_write(macptr, *((u32 *) (tmpbuf)));
1883
1884         tempval = *((u32 *) (tmpbuf + 4));
1885
1886         gfar_write(macptr+1, tempval);
1887 }
1888
1889 /* GFAR error interrupt handler */
1890 static irqreturn_t gfar_error(int irq, void *dev_id)
1891 {
1892         struct net_device *dev = dev_id;
1893         struct gfar_private *priv = netdev_priv(dev);
1894
1895         /* Save ievent for future reference */
1896         u32 events = gfar_read(&priv->regs->ievent);
1897
1898         /* Clear IEVENT */
1899         gfar_write(&priv->regs->ievent, IEVENT_ERR_MASK);
1900
1901         /* Hmm... */
1902         if (netif_msg_rx_err(priv) || netif_msg_tx_err(priv))
1903                 printk(KERN_DEBUG "%s: error interrupt (ievent=0x%08x imask=0x%08x)\n",
1904                        dev->name, events, gfar_read(&priv->regs->imask));
1905
1906         /* Update the error counters */
1907         if (events & IEVENT_TXE) {
1908                 dev->stats.tx_errors++;
1909
1910                 if (events & IEVENT_LC)
1911                         dev->stats.tx_window_errors++;
1912                 if (events & IEVENT_CRL)
1913                         dev->stats.tx_aborted_errors++;
1914                 if (events & IEVENT_XFUN) {
1915                         if (netif_msg_tx_err(priv))
1916                                 printk(KERN_DEBUG "%s: TX FIFO underrun, "
1917                                        "packet dropped.\n", dev->name);
1918                         dev->stats.tx_dropped++;
1919                         priv->extra_stats.tx_underrun++;
1920
1921                         /* Reactivate the Tx Queues */
1922                         gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT);
1923                 }
1924                 if (netif_msg_tx_err(priv))
1925                         printk(KERN_DEBUG "%s: Transmit Error\n", dev->name);
1926         }
1927         if (events & IEVENT_BSY) {
1928                 dev->stats.rx_errors++;
1929                 priv->extra_stats.rx_bsy++;
1930
1931                 gfar_receive(irq, dev_id);
1932
1933 #ifndef CONFIG_GFAR_NAPI
1934                 /* Clear the halt bit in RSTAT */
1935                 gfar_write(&priv->regs->rstat, RSTAT_CLEAR_RHALT);
1936 #endif
1937
1938                 if (netif_msg_rx_err(priv))
1939                         printk(KERN_DEBUG "%s: busy error (rstat: %x)\n",
1940                                dev->name, gfar_read(&priv->regs->rstat));
1941         }
1942         if (events & IEVENT_BABR) {
1943                 dev->stats.rx_errors++;
1944                 priv->extra_stats.rx_babr++;
1945
1946                 if (netif_msg_rx_err(priv))
1947                         printk(KERN_DEBUG "%s: babbling RX error\n", dev->name);
1948         }
1949         if (events & IEVENT_EBERR) {
1950                 priv->extra_stats.eberr++;
1951                 if (netif_msg_rx_err(priv))
1952                         printk(KERN_DEBUG "%s: bus error\n", dev->name);
1953         }
1954         if ((events & IEVENT_RXC) && netif_msg_rx_status(priv))
1955                 printk(KERN_DEBUG "%s: control frame\n", dev->name);
1956
1957         if (events & IEVENT_BABT) {
1958                 priv->extra_stats.tx_babt++;
1959                 if (netif_msg_tx_err(priv))
1960                         printk(KERN_DEBUG "%s: babbling TX error\n", dev->name);
1961         }
1962         return IRQ_HANDLED;
1963 }
1964
1965 /* Structure for a device driver */
1966 static struct platform_driver gfar_driver = {
1967         .probe = gfar_probe,
1968         .remove = gfar_remove,
1969         .driver = {
1970                 .name = "fsl-gianfar",
1971         },
1972 };
1973
1974 static int __init gfar_init(void)
1975 {
1976         int err = gfar_mdio_init();
1977
1978         if (err)
1979                 return err;
1980
1981         err = platform_driver_register(&gfar_driver);
1982
1983         if (err)
1984                 gfar_mdio_exit();
1985
1986         return err;
1987 }
1988
1989 static void __exit gfar_exit(void)
1990 {
1991         platform_driver_unregister(&gfar_driver);
1992         gfar_mdio_exit();
1993 }
1994
1995 module_init(gfar_init);
1996 module_exit(gfar_exit);
1997